Fix `make test:all` failures seen on macOS Tahoe (#26136)

builddefs/common_rules.mk

@@ -52,8 +52,12 @@ ifeq ($(strip $(DEBUG_ENABLE)),yes)
 	ASFLAGS  += -ggdb3
 endif
 
-# Always create a map file to see what was compiled and where.
+# Create a map file to see what was compiled and where, unless disabled
+# (e.g. test builds, which use the host linker — Apple's ld does not accept
+# -Map=/--cref).
+ifneq ($(strip $(CREATE_MAP)), no)
 LDFLAGS  += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
+endif
 
 #---------------- C Compiler Options ----------------
 

docs/features/unicode.md

@@ -25,7 +25,7 @@ Add the following to your `config.h`:
 |`UNICODE_KEY_MAC`       |`KC_LEFT_ALT`     |The key to hold when beginning a Unicode sequence with the macOS input mode     |
 |`UNICODE_KEY_LNX`       |`LCTL(LSFT(KC_U))`|The key to tap when beginning a Unicode sequence with the Linux input mode      |
 |`UNICODE_KEY_WINC`      |`KC_RIGHT_ALT`    |The key to hold when beginning a Unicode sequence with the WinCompose input mode|
-|`UNICODE_SELECTED_MODES`|`-1`              |A comma separated list of input modes for cycling through                       |
+|`UNICODE_SELECTED_MODES`|*n/a*             |A comma separated list of input modes for cycling through                       |
 |`UNICODE_CYCLE_PERSIST` |`true`            |Whether to persist the current Unicode input mode to EEPROM                     |
 |`UNICODE_TYPE_DELAY`    |`10`              |The amount of time to wait, in milliseconds, between Unicode sequence keystrokes|
 

platforms/chibios/drivers/eeprom/eeprom_legacy_emulated_flash.c

@@ -204,7 +204,9 @@ void print_eeprom(void) {
             }
             xprintf("%04x", i);
         }
-        if (i % 8 == 0) print(" ");
+        if (i % 8 == 0) {
+            print(" ");
+        }
 
         xprintf(" %02x", DataBuf[i]);
         if ((i + 1) % 16 == 0) {

platforms/test/drivers/audio_pwm_hardware.c

@@ -16,5 +16,5 @@
 #include "audio.h"
 
 void audio_driver_initialize_impl(void) {}
-void audio_driver_start_impl() {}
-void audio_driver_stop_impl() {}
+void audio_driver_start_impl(void) {}
+void audio_driver_stop_impl(void) {}

platforms/timer.c

@@ -1,7 +1,11 @@
 // Copyright 2023 Sergey Vlasov (@sigprof)
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-#include "timer.h"
+// Use an angle-bracket include so the header is located via the include
+// search path rather than source-relative lookup. timer.h uses
+// #include_next to chain to the active platform's _timer.h, and that
+// only has well-defined semantics when timer.h itself was found via -I.
+#include <timer.h>
 
 // Generate out-of-line copies for inline functions defined in timer.h.
 extern inline fast_timer_t timer_read_fast(void);

quantum/encoder/tests/encoder_tests.cpp

@@ -26,8 +26,8 @@ extern "C" {
 }
 
 struct update {
-    int8_t index;
-    bool   clockwise;
+    uint8_t index;
+    bool    clockwise;
 };
 
 uint8_t updates_array_idx = 0;

quantum/encoder/tests/encoder_tests_split_left_eq_right.cpp

@@ -26,8 +26,8 @@ extern "C" {
 }
 
 struct update {
-    int8_t index;
-    bool   clockwise;
+    uint8_t index;
+    bool    clockwise;
 };
 
 uint8_t updates_array_idx = 0;

quantum/encoder/tests/encoder_tests_split_left_gt_right.cpp

@@ -26,8 +26,8 @@ extern "C" {
 }
 
 struct update {
-    int8_t index;
-    bool   clockwise;
+    uint8_t index;
+    bool    clockwise;
 };
 
 uint8_t updates_array_idx = 0;

quantum/encoder/tests/encoder_tests_split_left_lt_right.cpp

@@ -26,8 +26,8 @@ extern "C" {
 }
 
 struct update {
-    int8_t index;
-    bool   clockwise;
+    uint8_t index;
+    bool    clockwise;
 };
 
 uint8_t updates_array_idx = 0;

quantum/encoder/tests/encoder_tests_split_no_left.cpp

@@ -26,8 +26,8 @@ extern "C" {
 }
 
 struct update {
-    int8_t index;
-    bool   clockwise;
+    uint8_t index;
+    bool    clockwise;
 };
 
 uint8_t updates_array_idx = 0;

quantum/encoder/tests/encoder_tests_split_no_right.cpp

@@ -26,8 +26,8 @@ extern "C" {
 }
 
 struct update {
-    int8_t index;
-    bool   clockwise;
+    uint8_t index;
+    bool    clockwise;
 };
 
 uint8_t updates_array_idx = 0;

quantum/process_keycode/process_key_override.c

@@ -175,7 +175,7 @@ const key_override_t *clear_active_override(const bool allow_reregister) {
 
     const key_override_t *const old = active_override;
 
-    const uint8_t mod_free_replacement = clear_mods_from(active_override->replacement);
+    const uint16_t mod_free_replacement = clear_mods_from(active_override->replacement);
 
     bool unregister_replacement = mod_free_replacement != KC_NO &&   // KC_NO is never registered
                                   mod_free_replacement < SAFE_RANGE; // Custom keycodes are never registered

quantum/process_keycode/process_space_cadet.c

@@ -165,6 +165,6 @@ bool process_space_cadet(uint16_t keycode, keyrecord_t *record) {
     return true;
 }
 
-void reset_space_cadet() {
+void reset_space_cadet(void) {
     sc_last = 0;
 }

quantum/unicode/unicode.c

@@ -46,12 +46,6 @@
 #    define UNICODE_KEY_WINC KC_RIGHT_ALT
 #endif
 
-// Comma-delimited, ordered list of input modes selected for use (e.g. in cycle)
-// Example: #define UNICODE_SELECTED_MODES UNICODE_MODE_WINCOMPOSE, UNICODE_MODE_LINUX
-#ifndef UNICODE_SELECTED_MODES
-#    define UNICODE_SELECTED_MODES -1
-#endif
-
 // Whether input mode changes in cycle should be written to EEPROM
 #ifndef UNICODE_CYCLE_PERSIST
 #    define UNICODE_CYCLE_PERSIST true
@@ -66,7 +60,7 @@ unicode_config_t unicode_config;
 uint8_t          unicode_saved_mods;
 led_t            unicode_saved_led_state;
 
-#if UNICODE_SELECTED_MODES != -1
+#ifdef UNICODE_SELECTED_MODES
 static uint8_t selected[]     = {UNICODE_SELECTED_MODES};
 static int8_t  selected_count = ARRAY_SIZE(selected);
 static int8_t  selected_index;
@@ -136,7 +130,7 @@ static void unicode_play_song(uint8_t mode) {
 
 void unicode_input_mode_init(void) {
     eeconfig_read_unicode_mode(&unicode_config);
-#if UNICODE_SELECTED_MODES != -1
+#ifdef UNICODE_SELECTED_MODES
 #    if UNICODE_CYCLE_PERSIST
     // Find input_mode in selected modes
     int8_t i;
@@ -178,7 +172,7 @@ void set_unicode_input_mode(uint8_t mode) {
 }
 
 static void cycle_unicode_input_mode(int8_t offset) {
-#if UNICODE_SELECTED_MODES != -1
+#ifdef UNICODE_SELECTED_MODES
     selected_index = (selected_index + offset) % selected_count;
     if (selected_index < 0) {
         selected_index += selected_count;

tests/test_common/keyboard_report_util.hpp

@@ -35,5 +35,5 @@ class KeyboardReportMatcher : public testing::MatcherInterface<report_keyboard_t
 
 template <typename... Ts>
 inline testing::Matcher<report_keyboard_t&> KeyboardReport(Ts... keys) {
-    return testing::MakeMatcher(new KeyboardReportMatcher(std::vector<uint8_t>({keys...})));
+    return testing::MakeMatcher(new KeyboardReportMatcher({static_cast<uint8_t>(keys)...}));
 }

tmk_core/protocol/usb_device_state.c

@@ -78,7 +78,7 @@ void usb_device_state_set_protocol(usb_hid_protocol_t protocol) {
     notify_usb_device_state_change(usb_device_state);
 }
 
-inline usb_hid_protocol_t usb_device_state_get_protocol() {
+inline usb_hid_protocol_t usb_device_state_get_protocol(void) {
     return usb_device_state.protocol;
 }