[Keymap] Add KiCad keymap for ANAVI Macro Pad 8 (#10766)

KiCad is a cross platform, free and open source electronics design
automation (EDA) suite. It was used to create ANAVI Macro Pad 8.

This keymap contains 2 layers for KiCad hotkeys and a 3rd layer
for controlling the backlighting and the underlighting.

- Layer for KiCad Schematic hotkeys:
  m - to move selected component
  r - to rotate selected component
  w - to wire components
  v - to edit component value
  F1 - zoom in
  F2 - zoom out
  F4 - zoom center

- Layer for KiCad PCB layout hotkets:
  m - to move selected component
  r - to rotate selected component
  x - to route a new track
  v - to add a via
  F1 - zoom in
  F2 - zoom out
  F4 - zoom center

Signed-off-by: Leon Anavi <leon@anavi.org>

keyboards/anavi/macropad8/keymaps/kicad/keymap.c

@@ -0,0 +1,117 @@
+ /* Copyright 2020 Leon Anavi <leon@anavi.org>
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+#include QMK_KEYBOARD_H
+
+#define _SCH 0
+#define _PCB 1
+#define _FN 2
+
+#define KC_X0 LT(_FN, KC_ESC)
+
+#ifdef RGBLIGHT_ENABLE
+// How long (in ms) to wait between animation steps for the rainbow mode
+const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {60, 30, 15};
+// How long (in milliseconds) to wait between animation steps for each of the "Swirling rainbow" animations
+const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {20, 10, 4};
+#endif
+
+/*
+ * The keymap contains 2 layers for KiCad hotkeys and a 3rd layer
+ * for controlling the backlighting and the underlighting.
+ *
+ * - Layer for KiCad Schematic hotkeys:
+ * m - to move selected component
+ * r - to rotate selected component
+ * w - to wire components
+ * v - to edit component value
+ * F1 - zoom in
+ * F2 - zoom out
+ * F4 - zoom center
+ *
+ * - Layer for KiCad PCB layout hotkets:
+ * m - to move selected component
+ * r - to rotate selected component
+ * x - to route a new track
+ * v - to add a via
+ * F1 - zoom in
+ * F2 - zoom out
+ * F4 - zoom center
+ * 
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_SCH] = LAYOUT_ortho_2x4(
+     KC_M, KC_R, KC_W, KC_V,
+     KC_F1, KC_F2, KC_F4, TO(_PCB)
+  ),
+
+  [_PCB] = LAYOUT_ortho_2x4(
+     KC_M, KC_R, KC_X, KC_V,
+     KC_F1, KC_F2, KC_F4, TO(_FN)
+  ),
+
+  [_FN] = LAYOUT_ortho_2x4(
+     RGB_TOG, RGB_MOD, RGB_M_R, RGB_M_SN,
+     BL_TOGG, BL_STEP, BL_BRTG, TO(_SCH)
+  )
+};
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+}
+
+void oled_task_user(void) {
+  // Host Keyboard Layer Status
+  oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false);
+  oled_write_P(PSTR("Layer: "), false);
+
+  switch (get_highest_layer(layer_state)) {
+    case _SCH:
+      oled_write_ln_P(PSTR("KiCad Schema"), false);
+      break;
+    case _PCB:
+      oled_write_ln_P(PSTR("KiCad PCB"), false);
+      break;
+    case _FN:
+      oled_write_ln_P(PSTR("FN "), false);
+      break;
+    default:
+      // Or use the write_ln shortcut over adding '\n' to the end of your string
+      oled_write_ln_P(PSTR("N/A"), false);
+  }
+
+  // Host Keyboard LED Status
+  led_t led_state = host_keyboard_led_state();
+  oled_write_P(PSTR("Num Lock: "), false);
+  oled_write_ln_P(led_state.num_lock ? PSTR("On") : PSTR("Off"), false);
+  oled_write_P(PSTR("Caps Lock: "), false);
+  oled_write_ln_P(led_state.caps_lock ? PSTR("On") : PSTR("Off"), false);
+  oled_write_P(PSTR("Scroll Lock: "), false);
+  oled_write_ln_P(led_state.scroll_lock ? PSTR("On") : PSTR("Off"), false);
+  oled_write_P(PSTR("Backlit: "), false);
+  oled_write_ln_P(is_backlight_enabled() ? PSTR("On") : PSTR("Off"), false);
+#ifdef RGBLIGHT_ENABLE
+  static char rgbStatusLine1[26] = {0};
+  snprintf(rgbStatusLine1, sizeof(rgbStatusLine1), "RGB Mode: %d", rgblight_get_mode());
+  oled_write_ln(rgbStatusLine1, false);
+  static char rgbStatusLine2[26] = {0};
+  snprintf(rgbStatusLine2, sizeof(rgbStatusLine2), "h:%d s:%d v:%d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val());
+  oled_write_ln(rgbStatusLine2, false);
+#endif
+}
+#endif