Merge remote-tracking branch 'origin/develop' into xap

keyboards/boardsource/microdox/config.h

@@ -1,83 +0,0 @@
-/*
-Copyright 2020 Cole Smith <cole@boadsource.xyz>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-#define VENDOR_ID 0xF7E0
-#define PRODUCT_ID 0x0412
-#define DEVICE_VER 0x0000
-#define MANUFACTURER Boardsource
-#define PRODUCT microdox
-
-/* key matrix size */
-// Rows are doubled-up
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 5
-#define MATRIX_ROW_PINS \
-    { B2, B6, B4, B5 }
-
-// wiring of each half
-#define MATRIX_COL_PINS \
-    { F4, F5, F6, F7, B1 }
-#define USE_SERIAL
-#define SOFT_SERIAL_PIN D2
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-// #define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
-#ifdef RGBLIGHT_ENABLE
-#    define RGBLED_NUM 12 // Number of LEDs
-#    define RGBLED_SPLIT \
-        { 6, 6 }
-#    define RGBLIGHT_EFFECT_BREATHING
-#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
-
-#endif
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/boardsource/microdox/info.json

@@ -1,54 +1,70 @@
 {
-    "keyboard_name": "microdox",
-    "url": "https://boardsource.xyz/store/5f2e7e4a2902de7151494f92",
-    "maintainer": "boardsource",
-    "layouts": {
-        "LAYOUT_split_3x5_3": {
-            "layout": [
-                { "label": "Q", "x": 0, "y": 0.3 },
-                { "label": "W", "x": 1, "y": 0.1 },
-                { "label": "E", "x": 2, "y": 0 },
-                { "label": "R", "x": 3, "y": 0.1 },
-                { "label": "T", "x": 4, "y": 0.2 },
-
-                { "label": "Y", "x": 8, "y": 0.2 },
-                { "label": "U", "x": 9, "y": 0.1 },
-                { "label": "I", "x": 10, "y": 0 },
-                { "label": "O", "x": 11, "y": 0.1 },
-                { "label": "P", "x": 12, "y": 0.3 },
-
-                { "label": "A", "x": 0, "y": 1.3 },
-                { "label": "S", "x": 1, "y": 1.1 },
-                { "label": "D", "x": 2, "y": 1 },
-                { "label": "F", "x": 3, "y": 1.1 },
-                { "label": "G", "x": 4, "y": 1.2 },
-
-                { "label": "H", "x": 8, "y": 1.2 },
-                { "label": "J", "x": 9, "y": 1.1 },
-                { "label": "K", "x": 10, "y": 1 },
-                { "label": "L", "x": 11, "y": 1.1 },
-                { "label": ";", "x": 12, "y": 1.3 },
-
-                { "label": "Z", "x": 0, "y": 2.3 },
-                { "label": "X", "x": 1, "y": 2.1 },
-                { "label": "C", "x": 2, "y": 2 },
-                { "label": "V", "x": 3, "y": 2.1 },
-                { "label": "B", "x": 4, "y": 2.2 },
-
-                { "label": "N", "x": 8, "y": 2.2 },
-                { "label": "M", "x": 9, "y": 2.1 },
-                { "label": ",", "x": 10, "y": 2 },
-                { "label": ".", "x": 11, "y": 2.1 },
-                { "label": "/", "x": 12, "y": 2.3 },
-
-                { "label": "GUI / KC_HANJ", "x": 3, "y": 3.7 },
-                { "label": "Lower", "x": 4, "y": 3.7 },
-                { "label": "Space", "x": 5, "y": 3.2 },
-
-                { "label": "Enter", "x": 7, "y": 3.2 },
-                { "label": "Raise", "x": 8, "y": 3.7 },
-                { "label": "Alt / KC_HAEN", "x": 9, "y": 3.7 }
-            ]
-        }
+  "manufacturer": "Boardsource",
+  "keyboard_name": "microdox",
+  "maintainer": "waffle87",
+  "development_board": "promicro",
+  "diode_direction": "COL2ROW",
+  "build": {
+    "lto": true
+  },
+  "features": {
+    "bootmagic": true,
+    "extrakey": true,
+    "mousekey": true,
+    "nkro": true,
+    "oled": true
+  },
+  "url": "https://boardsource.xyz/store/5f2e7e4a2902de7151494f92",
+  "usb": {
+    "pid": "0x0412",
+    "vid": "0xF7E0"
+  },
+  "split": {
+    "enabled": true
+  },
+  "community_layouts": [
+    "split_3x5_3"
+  ],
+  "layouts": {
+    "LAYOUT_split_3x5_3": {
+      "layout": [
+        { "matrix": [0, 0], "x": 0, "y": 0 },
+        { "matrix": [0, 1], "x": 1, "y": 0 },
+        { "matrix": [0, 2], "x": 2, "y": 0 },
+        { "matrix": [0, 3], "x": 3, "y": 0 },
+        { "matrix": [0, 4], "x": 4, "y": 0 },
+        { "matrix": [4, 4], "x": 5, "y": 0 },
+        { "matrix": [4, 3], "x": 6, "y": 0 },
+        { "matrix": [4, 2], "x": 7, "y": 0 },
+        { "matrix": [4, 1], "x": 8, "y": 0 },
+        { "matrix": [4, 0], "x": 9, "y": 0 },
+        { "matrix": [1, 0], "x": 10, "y": 0 },
+        { "matrix": [1, 1], "x": 11, "y": 0 },
+        { "matrix": [1, 2], "x": 12, "y": 0 },
+        { "matrix": [1, 3], "x": 13, "y": 0 },
+        { "matrix": [1, 4], "x": 14, "y": 0 },
+        { "matrix": [5, 4], "x": 15, "y": 0 },
+        { "matrix": [5, 3], "x": 16, "y": 0 },
+        { "matrix": [5, 2], "x": 17, "y": 0 },
+        { "matrix": [5, 1], "x": 18, "y": 0 },
+        { "matrix": [5, 0], "x": 19, "y": 0 },
+        { "matrix": [2, 0], "x": 20, "y": 0 },
+        { "matrix": [2, 1], "x": 21, "y": 0 },
+        { "matrix": [2, 2], "x": 22, "y": 0 },
+        { "matrix": [2, 3], "x": 23, "y": 0 },
+        { "matrix": [2, 4], "x": 24, "y": 0 },
+        { "matrix": [6, 4], "x": 25, "y": 0 },
+        { "matrix": [6, 3], "x": 26, "y": 0 },
+        { "matrix": [6, 2], "x": 27, "y": 0 },
+        { "matrix": [6, 1], "x": 28, "y": 0 },
+        { "matrix": [6, 0], "x": 29, "y": 0 },
+        { "matrix": [3, 2], "x": 30, "y": 0 },
+        { "matrix": [3, 3], "x": 31, "y": 0 },
+        { "matrix": [3, 4], "x": 32, "y": 0 },
+        { "matrix": [7, 4], "x": 33, "y": 0 },
+        { "matrix": [7, 3], "x": 34, "y": 0 },
+        { "matrix": [7, 2], "x": 35, "y": 0 }
+      ]
     }
+  }
 }

keyboards/boardsource/microdox/keymaps/cole/keymap.c

@@ -1,5 +1,5 @@
 /*
-Copyright 2020 Cole Smith <cole@boadsource.xyz>
+Copyright 2022 Cole Smith <cole@boadsource.xyz>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by

keyboards/boardsource/microdox/keymaps/cole/rules.mk

@@ -1 +0,0 @@
-OLED_ENABLE = yes

keyboards/boardsource/microdox/keymaps/default/keymap.c

@@ -1,5 +1,5 @@
 /*
-Copyright 2020 Cole Smith <cole@boadsource.xyz>
+Copyright 2022 Cole Smith <cole@boadsource.xyz>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by

keyboards/boardsource/microdox/keymaps/via/rules.mk

@@ -1,3 +1 @@
-OLED_ENABLE = yes
 VIA_ENABLE = yes
-LTO_ENABLE = yes

keyboards/boardsource/microdox/microdox.c

@@ -1,5 +1,5 @@
 /*
-Copyright 2020 Cole Smith <cole@boadsource.xyz>
+Copyright 2022 Cole Smith <cole@boadsource.xyz>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -15,9 +15,11 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "microdox.h"
-
 #ifdef OLED_ENABLE
+#include "oled_driver.h"
+#include "bitwise.h"
+#include "action_layer.h"
+
 oled_rotation_t oled_init_kb(oled_rotation_t rotation) {
   if (is_keyboard_master())
     return OLED_ROTATION_180;
@@ -26,14 +28,12 @@ oled_rotation_t oled_init_kb(oled_rotation_t rotation) {
 
 static void render_logo(void) {
   static const char PROGMEM qmk_logo[] = {
-    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
-    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
-    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
-    0
+    0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94,
+    0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4,
+    0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00
   };
   oled_write_P(qmk_logo, false);
 }
-
 static void render_status(void) {
    switch (get_highest_layer(layer_state)) {
     case 0:
@@ -74,3 +74,24 @@ bool oled_task_kb(void) {
   return false;
 }
 #endif
+
+#ifdef ENCODER_ENABLE
+#include "encoder.h"
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+  if (!encoder_update_user(index, clockwise)) { return false; }
+  if (index == 0) {
+    if (clockwise) {
+      tap_code_delay(KC_VOLU, 10);
+    } else {
+      tap_code_delay(KC_VOLD, 10);  
+    }
+  } else {
+    if (clockwise) {
+      tap_code(KC_MNXT);
+    } else {
+      tap_code(KC_MPRV);
+    }
+  }
+  return true;
+}
+#endif

keyboards/boardsource/microdox/microdox.h

@@ -1,38 +0,0 @@
-/*
-Copyright 2020 Cole Smith <cole@boadsource.xyz>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "quantum.h"
-#define xxx KC_NO
-
-#define LAYOUT_split_3x5_3(\
-  k00, k01, k02, k03, k04,    k44, k43, k42, k41, k40, \
-  k10, k11, k12, k13, k14,    k54, k53, k52, k51, k50, \
-  k20, k21, k22, k23, k24,    k64, k63, k62, k61, k60, \
-            k32, k33, k34,    k74, k73, k72            \
-  ) \
-  { \
-    { k00, k01, k02, k03, k04 }, \
-    { k10, k11, k12, k13, k14 }, \
-    { k20, k21, k22, k23, k24 }, \
-    { xxx, xxx, k32, k33, k34 }, \
-    { k40, k41, k42, k43, k44 }, \
-    { k50, k51, k52, k53, k54 }, \
-    { k60, k61, k62, k63, k64 }, \
-    { xxx, xxx, k72, k73, k74 } \
-  }

keyboards/boardsource/microdox/readme.md

@@ -8,8 +8,9 @@
 
 Make example for this keyboard (after setting up your build environment):
 
+    make boardsource/microdox/v1:default
     make boardsource/microdox/v2:default
 
-Remove `v2` from above command if you purchased your PCBs prior to April 2022
+Compile `v1` firmware if you purchased your PCBs prior to April 2022.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/boardsource/microdox/v1/config.h

@@ -0,0 +1,20 @@
+// Copyright 2022 jack (@waffle87)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT

keyboards/boardsource/microdox/v1/info.json

@@ -0,0 +1,25 @@
+{
+  "features": {
+    "rgblight": true
+  },
+    "matrix_pins": {
+    "cols": ["F4", "F5", "F6", "F7", "B1"],
+    "rows": ["B2", "B6", "B4", "B5"]
+  },
+  "usb": {
+    "device_version": "1.0.0"
+  },
+  "split": {
+    "soft_serial_pin": "D2"
+  },
+    "rgblight": {
+    "pin": "D3",
+    "sleep": true,
+    "led_count": 12,
+    "split_count": [6, 6],
+    "max_brightness": 150,
+    "animations": {
+      "all": true
+    }
+  }
+}

keyboards/boardsource/microdox/v1/rules.mk

@@ -0,0 +1 @@
+# This file intentionally left blank

keyboards/boardsource/microdox/v2/config.h

@@ -1,45 +1,14 @@
 // Copyright 2022 jack (@waffle87)
 // SPDX-License-Identifier: GPL-2.0-or-later
 #pragma once
-#undef MATRIX_ROW_PINS
-#undef MATRIX_COL_PINS
-#define MATRIX_ROW_PINS \
-    { F4, D2, C6, B1 }
-#define MATRIX_COL_PINS \
-    { D4, D7, B3, F7, F6 }
-#define MATRIX_ROW_PINS_RIGHT \
-    { F5, F7, F6, E6 }
-#define MATRIX_COL_PINS_RIGHT \
-    { F4, B1, D7, C6, B3 }
-#undef SOFT_SERIAL_PIN
-#define SOFT_SERIAL_PIN D3
-#undef RGB_DI_PIN
 #define RGB_DI_PIN B5
-#ifdef RGBLIGHT_ENABLE
-#    undef RGBLED_NUM
-#    undef RGBLED_SPLIT
-#    define RGBLED_NUM 8
-#    define RGBLED_SPLIT { 4, 4 } // underglow only
-#    define RGBLIGHT_SLEEP
-#    define RGBLIGHT_EFFECT_BREATHING
-#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#endif
-#ifdef RGB_MATRIX_ENABLE
-#    define DRIVER_LED_TOTAL 44
-#    define RGB_MATRIX_SPLIT { 22, 22 }
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
-#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
-#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
-#    define ENABLE_RGB_MATRIX_BREATHING
-#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-#endif
-#ifdef ENCODER_ENABLE
-#    define ENCODERS_PAD_A { E6 }
-#    define ENCODERS_PAD_B { B2 }
-#    define ENCODERS_PAD_A_RIGHT { B6 }
-#    define ENCODERS_PAD_B_RIGHT { B2 }
-#endif
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
+#define DRIVER_LED_TOTAL 44
+#define RGB_MATRIX_SPLIT { 22, 22 }
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
+#define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_BREATHING
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS

keyboards/boardsource/microdox/v2/info.json

@@ -0,0 +1,82 @@
+{
+  "features": {
+    "rgb_matrix": true
+  },
+  "matrix_pins": {
+    "cols": ["D4", "D7", "B3", "F7", "F6"],
+    "rows": ["F4", "D2", "C6", "B1"]
+  },
+  "usb": {
+    "device_version": "2.0.0"
+  },
+  "encoder": {
+    "enabled": true,
+    "rotary": [
+      { "pin_a": "E6", "pin_b": "B2"}
+    ]
+  },
+  "split": {
+    "soft_serial_pin": "D3",
+    "matrix_pins": {
+      "right": {
+        "cols": ["F4", "B1", "D7", "C6", "B3"],
+        "rows": ["F5", "F7", "F6", "E6"]
+      }
+    },
+    "encoder": {
+      "right": {
+        "rotary": [
+          { "pin_a": "B6", "pin_b": "B2" }
+        ]
+      }
+    }
+  },
+  "rgb_matrix": {
+    "layout": [
+      { "flags": 2, "x": 12, "y": 11 },
+      { "flags": 2, "x": 86, "y": 11 },
+      { "flags": 2, "x": 86, "y": 53 },
+      { "flags": 2, "x": 0, "y": 64 },
+      { "flags": 2, "x": 211, "y": 11 },
+      { "flags": 2, "x": 136, "y": 11 },
+      { "flags": 2, "x": 136, "y": 53 },
+      { "flags": 2, "x": 224, "y": 64 },
+      { "flags": 4, "matrix": [0, 0], "x": 0,  "y": 0 },
+      { "flags": 4, "matrix": [0, 1], "x": 24,  "y": 0 },
+      { "flags": 4, "matrix": [0, 2], "x": 49,  "y": 0 },
+      { "flags": 4, "matrix": [0, 3], "x": 74,  "y": 0 },
+      { "flags": 4, "matrix": [0, 4], "x": 99,  "y": 0 },
+      { "flags": 4, "matrix": [4, 4], "x": 124,  "y": 0 },
+      { "flags": 4, "matrix": [4, 3], "x": 149,  "y": 0 },
+      { "flags": 4, "matrix": [4, 2], "x": 174,  "y": 0 },
+      { "flags": 4, "matrix": [4, 1], "x": 199,  "y": 0 },
+      { "flags": 4, "matrix": [4, 0], "x": 224,  "y": 0 },
+      { "flags": 4, "matrix": [1, 0], "x": 0,  "y": 21 },
+      { "flags": 4, "matrix": [1, 1], "x": 24,  "y": 21 },
+      { "flags": 4, "matrix": [1, 2], "x": 49,  "y": 21 },
+      { "flags": 4, "matrix": [1, 3], "x": 74,  "y": 21 },
+      { "flags": 4, "matrix": [1, 4], "x": 99,  "y": 21 },
+      { "flags": 4, "matrix": [5, 4], "x": 124,  "y": 21 },
+      { "flags": 4, "matrix": [5, 3], "x": 149,  "y": 21 },
+      { "flags": 4, "matrix": [5, 2], "x": 174,  "y": 21 },
+      { "flags": 4, "matrix": [5, 1], "x": 199,  "y": 21 },
+      { "flags": 4, "matrix": [5, 0], "x": 224,  "y": 21 },
+      { "flags": 4, "matrix": [2, 0], "x": 0,  "y": 42 },
+      { "flags": 4, "matrix": [2, 1], "x": 24,  "y": 42 },
+      { "flags": 4, "matrix": [2, 2], "x": 49,  "y": 42 },
+      { "flags": 4, "matrix": [2, 3], "x": 74,  "y": 42 },
+      { "flags": 4, "matrix": [2, 4], "x": 99,  "y": 42 },
+      { "flags": 4, "matrix": [6, 4], "x": 124,  "y": 42 },
+      { "flags": 4, "matrix": [6, 3], "x": 149,  "y": 42 },
+      { "flags": 4, "matrix": [6, 2], "x": 174,  "y": 42 },
+      { "flags": 4, "matrix": [6, 1], "x": 199,  "y": 42 },
+      { "flags": 4, "matrix": [6, 0], "x": 224,  "y": 42 },
+      { "flags": 1, "matrix": [3, 2], "x": 49,  "y": 64 },
+      { "flags": 1, "matrix": [3, 3], "x": 74,  "y": 64 },
+      { "flags": 1, "matrix": [3, 4], "x": 99,  "y": 64 },
+      { "flags": 1, "matrix": [7, 4], "x": 124,  "y": 64 },
+      { "flags": 1, "matrix": [7, 3], "x": 149,  "y": 64 },
+      { "flags": 1, "matrix": [7, 2], "x": 174,  "y": 64 }
+    ]
+  }
+}

keyboards/boardsource/microdox/v2/rules.mk

@@ -1,8 +1 @@
-RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = WS2812
-RGB_MATRIX_SUPPORTED = yes
-RGBLIGHT_ENABLE = no
-OLED_ENABLE = yes
-OLED_DRIVER = SSD1306
-ENCODER_ENABLE = yes
-LTO_ENABLE = yes

keyboards/boardsource/microdox/v2/v2.c

@@ -1,62 +0,0 @@
-// Copyright 2022 jack (@waffle87)
-// SPDX-License-Identifier: GPL-2.0-or-later
-#include "v2.h"
-
-#ifdef RGB_MATRIX_ENABLE
-led_config_t g_led_config = { 
-  {
-    { 13, 14, 15, 16, 17 },
-    { 12, 11, 10, 9,  8  },
-    { 3,  4,  5,  6,  7  },
-    { NO_LED, NO_LED, 2, 1, 0 },
-    //18-21 left underglow
-    { 35, 36, 37, 38, 39 },
-    { 34, 33, 32, 31, 30 },
-    { 25, 26, 27, 28, 29 },
-    { NO_LED, NO_LED, 24, 23, 22 }
-    //40-44 right underglow
-  }, {
-    {99,64}, {74,64}, {49,64}, //0-2
-    {0,42},  {24,42}, {49,42}, {74,42}, {99,42}, //3-7
-    {99,21}, {74,21}, {49,21}, {24,21}, {0,21}, //8-12
-    {0,0},   {24,0},  {49,0},  {74,0},  {99,0}, //13-17
-    {12,11}, {86,11}, {86,53}, {0,64}, //18-21
-    {124,64}, {149,64}, {174,64}, //22-24
-    {224,42}, {199,42}, {174,42}, {149,42}, {124,42}, //25-29
-    {124,21}, {149,21}, {174,21}, {199,21}, {224,21}, //30-34
-    {224,0},  {199,0},  {174,0},  {149,0},  {124,0}, //35-39
-    {211,11}, {136,11}, {136,53}, {224,64} //40-44
-  }, {
-    1, 1, 1,
-    4, 4, 4, 4, 4,
-    4, 4, 4, 4, 4,
-    4, 4, 4, 4, 4,
-    2, 2, 2, 2,
-    1, 1, 1,
-    4, 4, 4, 4, 4,
-    4, 4, 4, 4, 4,
-    4, 4, 4, 4, 4,
-    2, 2, 2, 2
-  }
-};
-#endif
-
-#ifdef ENCODER_ENABLE
-bool encoder_update_kb(uint8_t index, bool clockwise) {
-  if (!encoder_update_user(index, clockwise)) { return false; }
-  if (index == 0) {
-    if (clockwise) {
-      tap_code_delay(KC_VOLU, 10);
-    } else {
-      tap_code_delay(KC_VOLD, 10);  
-    }
-  } else {
-    if (clockwise) {
-      tap_code(KC_MNXT);
-    } else {
-      tap_code(KC_MPRV);
-    }
-  }
-  return false;
-}
-#endif

keyboards/boardsource/microdox/v2/v2.h

@@ -1,22 +0,0 @@
-// Copyright 2022 jack (@waffle87)
-// SPDX-License-Identifier: GPL-2.0-or-later
-#pragma once
-#include "quantum.h"
-#define xxx KC_NO
-
-#define LAYOUT_split_3x5_3(\
-  k00, k01, k02, k03, k04,    k44, k43, k42, k41, k40, \
-  k10, k11, k12, k13, k14,    k54, k53, k52, k51, k50, \
-  k20, k21, k22, k23, k24,    k64, k63, k62, k61, k60, \
-            k32, k33, k34,    k74, k73, k72            \
-  ) \
-  { \
-    { k00, k01, k02, k03, k04 }, \
-    { k10, k11, k12, k13, k14 }, \
-    { k20, k21, k22, k23, k24 }, \
-    { xxx, xxx, k32, k33, k34 }, \
-    { k40, k41, k42, k43, k44 }, \
-    { k50, k51, k52, k53, k54 }, \
-    { k60, k61, k62, k63, k64 }, \
-    { xxx, xxx, k72, k73, k74 } \
-  }

keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/keymap.c

@@ -1,4 +1,4 @@
-/* Copyright 2021 James Young (@noroadsleft)
+/* Copyright 2021-2022 James Young (@noroadsleft)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -30,7 +30,7 @@ enum layer_names {
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
     [_DV] = LAYOUT_65_ansi(
-        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_LBRC, KC_RBRC, KC_BSPC, KC_HOME,
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_LBRC, KC_RBRC, KC_BSPC, KC_HOME,
         KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH, KC_EQL,  KC_BSLS, KC_PGUP,
         FN_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS,          KC_ENT,  KC_PGDN,
         KC_LSFT,          KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT, KC_UP,   KC_END,
@@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     [_QW] = LAYOUT_65_ansi(
-        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME,
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME,
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
         FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGDN,
         KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
@@ -56,13 +56,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [_FN] = LAYOUT_65_ansi(
         KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  DM_REC1,
         _______, KC_CALC, KC_APP,  _______, _______, _______, KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS, DM_REC2,
-        _______, M_SALL,  _______, _______, _______, _______, KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______,          DM_RSTP, DM_PLY1,
+        _______, M_SALL,  _______, _______, G_PWD,   _______, KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______,          DM_RSTP, DM_PLY1,
         _______,          M_UNDO,  M_CUT,   M_COPY,  M_PASTE, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, TO(_SY), _______, _______, DM_PLY2,
         _______, _______, _______,                            TG(_NP),                   _______, _______, _______, _______, _______, _______
     ),
 
     [_SY] = LAYOUT_65_ansi(
-        TG(_SY), TO(_DV), TO(_QW), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,   XXXXXXX, DEBUG,   XXXXXXX, VRSN,    XXXXXXX, XXXXXXX,
+        TG(_SY), TO(_DV), TO(_QW), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, QK_BOOT, XXXXXXX, DB_TOGG, XXXXXXX, VRSN,    XXXXXXX, XXXXXXX,
         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX, XXXXXXX,
         XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,

keyboards/handwired/promethium/keymaps/priyadi/config.h

@@ -2,12 +2,6 @@
 
 #define PRIYADI_PROMETHIUM
 
-/* bootmagic salt key */
-#define BOOTMAGIC_KEY_SALT              KC_ESC
-
-/* skip bootmagic and eeconfig */
-#define BOOTMAGIC_KEY_SKIP              KC_SPACE
-
 #define RGBSPS_ENABLE
 #define RGBSPS_DEMO_ENABLE
 

keyboards/kbdfans/kbd75/keymaps/noroadsleft/keymap.c

@@ -1,4 +1,4 @@
-/* Copyright 2020-2021 James Young (@noroadsleft)
+/* Copyright 2020-2022 James Young (@noroadsleft)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -16,22 +16,6 @@
 
 #include "noroadsleft.h"
 
-#define LAYOUT_75_ansi_wkl( \
-    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
-    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
-    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \
-    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       K315, \
-    K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411,       K413, K414, K415, \
-    K500, K501,                         K506,                         K510, K512, K513, K514, K515  \
-) { \
-    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
-    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115 }, \
-    { K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  K215 }, \
-    { K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  KC_NO, K315 }, \
-    { K400,  KC_NO, K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  KC_NO, K413,  K414,  K415 }, \
-    { K500,  K501,  KC_NO, KC_NO, KC_NO, KC_NO, K506,  KC_NO, KC_NO, KC_NO, K510,  KC_NO, K512,  K513,  K514,  K515 }  \
-}
-
 enum layer_names {
     _DV,
     _QW,
@@ -88,13 +72,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          KC_DEL,  DM_REC1,
         _______, KC_CALC, KC_APP,  G_PUSH,  _______, _______, KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS,          DM_REC2,
-        _______, M_SALL,  _______, G_FTCH,  _______, _______, KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______,          DM_RSTP,          DM_PLY1,
+        _______, M_SALL,  _______, G_FTCH,  G_PWD,   _______, KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______,          DM_RSTP,          DM_PLY1,
         _______,          M_UNDO,  M_CUT,   M_COPY,  M_PASTE, G_BRCH,  _______, KC_MUTE, KC_VOLD, KC_VOLU, _______,          _______, _______, DM_PLY2,
         _______, _______,                                     _______,                                     _______, _______, _______, _______, _______
     ),
 
     [_SY] = LAYOUT_75_ansi_wkl(
-        TG(_SY), TO(_DV), TO(_QW), XXXXXXX, TG(_Q2), XXXXXXX, XXXXXXX, XXXXXXX, RESET,   EEP_RST, DEBUG,   XXXXXXX, VRSN,    XXXXXXX, XXXXXXX, XXXXXXX,
+        TG(_SY), TO(_DV), TO(_QW), XXXXXXX, TG(_Q2), XXXXXXX, XXXXXXX, XXXXXXX, QK_BOOT, EE_CLR,  DB_TOGG, XXXXXXX, VRSN,    XXXXXXX, XXXXXXX, XXXXXXX,
         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          KC_DEL,  XXXXXXX,
         XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX,
         XXXXXXX, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX,          XXXXXXX,

keyboards/kc60/keymaps/noroadsleft/keymap.c

@@ -1,4 +1,4 @@
-/* Copyright 2018-2021 James Young (@noroadsleft)
+/* Copyright 2018-2022 James Young (@noroadsleft)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -101,13 +101,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [_MA] = LAYOUT_60_ansi(
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, DM_REC1, DM_REC2, _______,
         _______, _______, _______, G_PUSH,  _______, _______, _______, _______, _______, _______, _______, DM_PLY1, DM_PLY2, DM_RSTP,
-        _______, _______, _______, G_FTCH,  _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, G_FTCH,  G_PWD,   _______, _______, _______, _______, _______, _______, _______,          _______,
         _______,          _______, _______, _______, _______, G_BRCH,  _______, _______, _______, _______, _______,          _______,
         _______, _______, _______,                            _______,                            _______, _______, _______, _______
     ),
 
     [_SY] = LAYOUT_60_ansi(
-        TG(_SY), TO(_DV), TO(_QW), TO(_CM), TG(_Q2), XXXXXXX, XXXXXXX, XXXXXXX, RESET,   XXXXXXX, DEBUG,   XXXXXXX, VRSN,    XXXXXXX,
+        TG(_SY), TO(_DV), TO(_QW), TO(_CM), TG(_Q2), XXXXXXX, XXXXXXX, XXXXXXX, QK_BOOT, XXXXXXX, DB_TOGG, XXXXXXX, VRSN,    XXXXXXX,
         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX,
         XXXXXXX,          XXXXXXX, XXXXXXX, BL_DEC,  BL_TOGG, BL_INC,  BL_BRTG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX,

keyboards/keebio/nyquist/keymaps/danielhklein/config.h

@@ -14,13 +14,11 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-
+#pragma once
 
 #define TAPPING_TERM 150 
 #define USE_SERIAL
 #define EE_HANDS
-#define BOOTMAGIC_KEY_SALT KC_ENT
-
 
 #ifdef SUBPROJECT_rev1
     #include "../../rev1/config.h"

keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/config.h

@@ -60,10 +60,6 @@
 
 #define RGBLIGHT_LIMIT_VAL 10
 
-//bootmagic
-#define BOOTMAGIC_KEY_SALT KC_V
-#define BOOTMAGIC_KEY_EEPROM_CLEAR KC_Q
-
 #ifdef RGB_MATRIX_ENABLE
 
 #    undef ENABLE_RGB_MATRIX_ALPHAS_MODS

keyboards/kprepublic/bm40hsrgb/keymaps/signynt/config.h

@@ -25,10 +25,6 @@
 //#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #define RGBLIGHT_LIMIT_VAL 10
 
-//bootmagic
-#define BOOTMAGIC_KEY_SALT KC_V
-#define BOOTMAGIC_KEY_EEPROM_CLEAR KC_Q
-
 #ifdef RGB_MATRIX_ENABLE
 
 #define TAPPING_TERM 200

keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/config.h

@@ -25,10 +25,6 @@
 //#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #define RGBLIGHT_LIMIT_VAL 10
 
-//bootmagic
-#define BOOTMAGIC_KEY_SALT KC_V
-#define BOOTMAGIC_KEY_EEPROM_CLEAR KC_Q
-
 #ifdef RGB_MATRIX_ENABLE
 
 #define TAPPING_TERM 200

keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/config.h

@@ -25,10 +25,6 @@
 //#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #define RGBLIGHT_LIMIT_VAL 10
 
-//bootmagic
-#define BOOTMAGIC_KEY_SALT KC_V
-#define BOOTMAGIC_KEY_EEPROM_CLEAR KC_Q
-
 #ifdef RGB_MATRIX_ENABLE
 
 #define TAPPING_TERM 200

keyboards/kprepublic/jj50/keymaps/archetype/config.h

@@ -7,4 +7,3 @@
 #define NO_AUTO_SHIFT_ALPHA
 #define TAPPING_TERM 150
 #define TAPPING_TERM_PER_KEY
-//#define BOOTMAGIC_KEY_SALT KC_LCTL

keyboards/massdrop/thekey_v2/config.h

@@ -0,0 +1,50 @@
+/* Copyright 2022 Jason Wihardja
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Drop
+#define PRODUCT         The Key V2
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ */
+#define MATRIX_ROW_PINS { D4 }
+#define MATRIX_COL_PINS { D2, D1, D0 }
+
+#define DIODE_DIRECTION ROW2COL
+
+#define RGB_DI_PIN B1
+#define RGBLED_NUM 5
+#define RGBLIGHT_LED_MAP {4, 0, 1, 2, 3}
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 10
+#define RGBLIGHT_VAL_STEP 15
+#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#define RGBLIGHT_LAYERS /* Enable lighting layers */
+#define RGBLIGHT_LAYER_BLINK /* Enable lighting layer blink */

keyboards/massdrop/thekey_v2/info.json

@@ -0,0 +1,14 @@
+{
+    "keyboard_name": "The Key V2",
+    "url": "https://drop.com/buy/stack-overflow-the-key-v2-macropad",
+    "maintainer": "massdrop",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "label": "K00 (D4,D2)", "x": 0, "y": 0 },
+                { "label": "K01 (D4,D1)", "x": 1, "y": 0 },
+                { "label": "K02 (D4,D0)", "x": 2, "y": 0 }
+            ]
+        }
+    }
+}

keyboards/massdrop/thekey_v2/keymaps/default-macos/keymap.c

@@ -0,0 +1,23 @@
+/* Copyright 2022 Jason Wihardja
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT(KC_LGUI, KC_C, KC_V),
+
+};

keyboards/massdrop/thekey_v2/keymaps/default/keymap.c

@@ -0,0 +1,23 @@
+/* Copyright 2022 Jason Wihardja
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT(KC_LCTL, KC_C, KC_V),
+
+};

keyboards/massdrop/thekey_v2/keymaps/rgb-control-macos/keymap.c

@@ -0,0 +1,109 @@
+/* Copyright 2022 Jason Wihardja
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum custom_keycodes {
+    LAYER_SWITCH = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Default */
+    [0] = LAYOUT(LAYER_SWITCH, G(KC_C), G(KC_V)),
+
+    /* RGB Toggle + Mode Change */
+    [1] = LAYOUT(LAYER_SWITCH, RGB_TOG, RGB_MOD),
+
+    /* RGB Brightness */
+    [2] = LAYOUT(LAYER_SWITCH, RGB_VAD, RGB_VAI),
+
+    /* RGB Hue */
+    [3] = LAYOUT(LAYER_SWITCH, RGB_HUD, RGB_HUI),
+
+    /* RGB Saturation */
+    [4] = LAYOUT(LAYER_SWITCH, RGB_SAD, RGB_SAI),
+
+};
+
+/* Lighting layers */
+
+const rgblight_segment_t PROGMEM layer_indicator_0[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_WHITE},
+    {1, 4, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM layer_indicator_1[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_OFF},
+    {1, 1, HSV_WHITE},
+    {2, 3, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM layer_indicator_2[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 2, HSV_OFF},
+    {2, 1, HSV_WHITE},
+    {3, 2, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM layer_indicator_3[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 3, HSV_OFF},
+    {3, 1, HSV_WHITE},
+    {4, 1, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM layer_indicator_4[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 4, HSV_OFF},
+    {4, 1, HSV_WHITE}
+);
+
+const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(
+    layer_indicator_0,
+    layer_indicator_1,
+    layer_indicator_2,
+    layer_indicator_3,
+    layer_indicator_4
+);
+
+void keyboard_post_init_user(void) {
+    /* Enable the LED layers */
+    rgblight_layers = rgb_layers;
+}
+
+/* Layer handler */
+
+uint16_t layer = 0;
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case LAYER_SWITCH:
+            if (record->event.pressed) {
+                if (layer > 0) {
+                    layer_off(layer);
+                }
+
+                rgblight_unblink_layer(layer);
+                layer = (layer + 1) % 5;
+                rgblight_blink_layer_repeat(layer, 1000, 1);
+
+                if (layer > 0) {
+                    layer_on(layer);
+                }
+            }
+            return false;
+        default:
+            return true;
+    }
+}

keyboards/massdrop/thekey_v2/keymaps/rgb-control/keymap.c

@@ -0,0 +1,109 @@
+/* Copyright 2022 Jason Wihardja
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum custom_keycodes {
+    LAYER_SWITCH = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Default */
+    [0] = LAYOUT(LAYER_SWITCH, C(KC_C), C(KC_V)),
+
+    /* RGB Toggle + Mode Change */
+    [1] = LAYOUT(LAYER_SWITCH, RGB_TOG, RGB_MOD),
+
+    /* RGB Brightness */
+    [2] = LAYOUT(LAYER_SWITCH, RGB_VAD, RGB_VAI),
+
+    /* RGB Hue */
+    [3] = LAYOUT(LAYER_SWITCH, RGB_HUD, RGB_HUI),
+
+    /* RGB Saturation */
+    [4] = LAYOUT(LAYER_SWITCH, RGB_SAD, RGB_SAI),
+
+};
+
+/* Lighting layers */
+
+const rgblight_segment_t PROGMEM layer_indicator_0[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_WHITE},
+    {1, 4, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM layer_indicator_1[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 1, HSV_OFF},
+    {1, 1, HSV_WHITE},
+    {2, 3, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM layer_indicator_2[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 2, HSV_OFF},
+    {2, 1, HSV_WHITE},
+    {3, 2, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM layer_indicator_3[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 3, HSV_OFF},
+    {3, 1, HSV_WHITE},
+    {4, 1, HSV_OFF}
+);
+
+const rgblight_segment_t PROGMEM layer_indicator_4[] = RGBLIGHT_LAYER_SEGMENTS(
+    {0, 4, HSV_OFF},
+    {4, 1, HSV_WHITE}
+);
+
+const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(
+    layer_indicator_0,
+    layer_indicator_1,
+    layer_indicator_2,
+    layer_indicator_3,
+    layer_indicator_4
+);
+
+void keyboard_post_init_user(void) {
+    /* Enable the LED layers */
+    rgblight_layers = rgb_layers;
+}
+
+/* Layer handler */
+
+uint16_t layer = 0;
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case LAYER_SWITCH:
+            if (record->event.pressed) {
+                if (layer > 0) {
+                    layer_off(layer);
+                }
+
+                rgblight_unblink_layer(layer);
+                layer = (layer + 1) % 5;
+                rgblight_blink_layer_repeat(layer, 1000, 1);
+
+                if (layer > 0) {
+                    layer_on(layer);
+                }
+            }
+            return false;
+        default:
+            return true;
+    }
+}

keyboards/massdrop/thekey_v2/keymaps/url-copy-paste-macos/keymap.c

@@ -0,0 +1,39 @@
+/* Copyright 2022 Jason Wihardja
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum custom_keycodes {
+    TK_URL = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(TK_URL, G(KC_C), G(KC_V)),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case TK_URL:
+            if (record->event.pressed) {
+                // when keycode TK_URL is pressed
+                SEND_STRING("https://stackoverflow.com/\n");
+            }
+            break;
+        default:
+            break;
+    }
+    return true;
+}

keyboards/massdrop/thekey_v2/keymaps/url-copy-paste/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2022 Jason Wihardja
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum custom_keycodes {
+    TK_URL = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(TK_URL, C(KC_C), C(KC_V)),
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case TK_URL:
+            if (record->event.pressed) {
+                // when keycode TK_URL is pressed
+                SEND_STRING("https://stackoverflow.com/");
+            }
+            break;
+        default:
+            break;
+    }
+    return true;
+}

keyboards/massdrop/thekey_v2/readme.md

@@ -0,0 +1,38 @@
+# The Key V2
+
+![The Key V2](https://massdrop-s3.imgix.net/product-images/stack-overflow-the-key-v2-macropad/FP/vSqOp9eUQNGXW4zl3EVQ_7528-copy-pdp.jpg)
+
+
+The Stack Overflow "The Key V2" is a 3 button macropad based on atmega32u4 with hot-swappble Kailh Black Box switches.
+
+> Last year, we brought Stack Overflow’s iconic April Fool’s joke to life. Advertised as the new (and only) way to copy and paste on the site, it was an ultra-compact macropad called The Key. The punchline-turned product was a huge hit, selling over 10K units and earning a nearly 5-star average review. Now, we’re back with a second act: The Key V2. The same size as its portable predecessor, this punchline-turned-product has a few notable changes—including an acrylic case to accent its two built-in RGB LEDs. Plus, we made it hot-swappable, so you can easily change out the switches for a truly custom experience. And just like the original, a portion of all proceeds from The Key V2 will go to the data-driven social startup digitalundivided.
+
+Keyboard Maintainer: [Drop / Massdrop](https://github.com/Massdrop/qmk_firmware) 
+
+Hardware Supported: Massdrop, Inc. **The Key V2**
+
+Hardware Availability: Limited Release - https://drop.com/buy/stack-overflow-the-key-v2-macropad
+
+
+Make example for this keyboard (after setting up your build environment):
+```bash
+# default provided by Drop / Stack Overflow
+make massdrop/thekey_v2:default
+# common modification where C = CTRL+C, V = CTRL+V
+make massdrop/thekey_v2:url-copy-paste
+```
+
+Flashing example for this keyboard:
+```bash
+# install in dfu mode
+make massdrop/thekey_v2:default:dfu
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+Make example for this keyboard (after setting up your build environment):
+
+## Bootloader
+
+Enter the bootloader as follows:
+* **Bootmagic reset**: Hold down the "Stack Overflow" key, the "left-most" or furthest from the USB plug while inserting the USB cable for a few seconds. The LEDs will **NOT** turn on.
+* **Physical reset button**: Briefly press and hold the reset button while pluggin in the USB port. The LEDs on the back will **NOT** turn on. Depending on your case revision, you may have to remove the 4 screws on the back plate to access the switch OR you can use the associated access hole on newer releases.

keyboards/boardsource/microdox/rules.mk → keyboards/massdrop/thekey_v2/rules.mk

@@ -2,20 +2,17 @@
 MCU = atmega32u4
 
 # Bootloader selection
-BOOTLOADER = caterina
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes       # Enable Bootmagic Lite
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes        # Audio control and System control
+EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes            # Enable N-Key Rollover
+NKRO_ENABLE = no            # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-SPLIT_KEYBOARD = yes
-
-LAYOUTS = split_3x5_3

keyboards/massdrop/thekey_v2/thekey_v2.c

@@ -0,0 +1,17 @@
+/* Copyright 2022 Jason Wihardja
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "thekey_v2.h"

keyboards/massdrop/thekey_v2/thekey_v2.h

@@ -0,0 +1,27 @@
+/* Copyright 2022 Jason Wihardja
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+#define LAYOUT( \
+    K00, K01, K02  \
+) { \
+    { K00, K01, K02 }, \
+}

keyboards/mokey/ginkgo65hot/config.h

@@ -26,8 +26,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 15
 
-#define MATRIX_ROW_PINS { F7, B7, F5, F1, B0 }
-#define MATRIX_COL_PINS { C7, F6, B2, F4, B3, E6, D0, D1, D2, D3, D5, D4, D6, D7, B4 }
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, F7 }
+#define MATRIX_COL_PINS { C7, F6, F5, F4, F1, E6, D0, D1, D2, D3, D5, D4, D6, D7, B4 }
 #define UNUSED_PINS
 #define DIODE_DIRECTION COL2ROW
 

keyboards/planck/keymaps/priyadi/config.h

@@ -5,12 +5,6 @@
 
 #define PRIYADI_PLANCK
 
-/* bootmagic salt key */
-#define BOOTMAGIC_KEY_SALT              KC_ESC
-
-/* skip bootmagic and eeconfig */
-#define BOOTMAGIC_KEY_SKIP              KC_SPACE
-
 #define UNICODE_TYPE_DELAY 0
 
 #define LAYOUT_DVORAK

shell.nix

@@ -48,7 +48,7 @@ in
 mkShell {
   name = "qmk-firmware";
 
-  buildInputs = [ clang-tools dfu-programmer dfu-util diffutils git pythonEnv poetry niv ]
+  buildInputs = [ clang-tools dfu-programmer dfu-util diffutils git pythonEnv niv ]
     ++ lib.optional avr [
       pkgsCross.avr.buildPackages.binutils
       pkgsCross.avr.buildPackages.gcc8

users/noroadsleft/noroadsleft.c

@@ -1,4 +1,4 @@
-/* Copyright 2020-2021 James Young (@noroadsleft)
+/* Copyright 2020-2022 James Young (@noroadsleft)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -66,6 +66,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
                 }
             };
             return false;
+        case G_PWD:
+            if (record->event.pressed) {
+                clear_mods();
+                SEND_STRING("$( pwd | sed -e 's;^.*/keyboards/;;' -e 's;/;_;g')");
+            };
+            return false;
         case M_SALL:
             if (record->event.pressed) {
                 tap_code16(C(KC_A));

users/noroadsleft/noroadsleft.h

@@ -1,4 +1,4 @@
-/* Copyright 2020-2021 James Young (@noroadsleft)
+/* Copyright 2020-2022 James Young (@noroadsleft)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,6 +25,7 @@ enum userspace_keycodes {
     G_PUSH,
     G_FTCH,
     G_BRCH,
+    G_PWD,
     M_SALL,
     M_UNDO,
     M_CUT,

users/noroadsleft/readme.md

@@ -19,25 +19,28 @@ Outputs a string that tells me the Git commit from which my flashed firmware was
 
 Some frequently used Git commands.
 
-| Keycode                             | Output                 | Output with <kbd>Shift</kbd> |
-| :---------------------------------- | :--------------------- | :--------------------------- |
-| [`G_PUSH`](./noroadsleft.c#L44-L48) | `git push origin `     | `git push origin `           |
-| [`G_FTCH`](./noroadsleft.c#L49-L58) | `git fetch upstream `  | `git pull upstream `         |
-| [`G_BRCH`](./noroadsleft.c#L59-L68) | `master`               | `$(git branch-name)`         |
+| Keycode                             | Output                                                | Output with <kbd>Shift</kbd>                          |
+| :---------------------------------- | :---------------------------------------------------- | :---------------------------------------------------- |
+| [`G_PUSH`](./noroadsleft.c#L44-L48) | `git push origin `                                    | `git push origin `                                    |
+| [`G_FTCH`](./noroadsleft.c#L49-L58) | `git fetch upstream `                                 | `git pull upstream `                                  |
+| [`G_BRCH`](./noroadsleft.c#L59-L68) | `master`                                              | `$(git branch-name)`                                  |
+| [`G_PWD`](./noroadsleft.c#L69-L74)  | `$( pwd \| sed -e 's;^.*/keyboards/;;' -e 's;/;_;g')`  | `$( pwd \| sed -e 's;^.*/keyboards/;;' -e 's;/;_;g')`  |
 
 `$(git branch-name)` is an alias for `git rev-parse --abbrev-ref HEAD`, which normally returns the name of the current branch.
 
+The `G_PWD` macro outputs a shell expansion that returns the current working directory in relation to `qmk_firmware/keyboards/`, and with the slashes replaced with underscores. I do a lot of keyboard refactoring in QMK, and this is a string I use regularly.
+
 ### Customized Keycodes
 
 I used to have a boolean variable that changed the functionality of these keycodes, but I no longer work in the environment that I wrote the functionality for, so I took it out. The keycodes still exist because all my `keymap.c` files reference the custom keycodes I defined.
 
 | Keycode                               | Action    |
 | :------------------------------------ | :-------- |
-| [`M_SALL`](./noroadsleft.c#L69-L73)   | `Ctrl+A`  |
-| [`M_UNDO`](./noroadsleft.c#L74-L82)   | `Ctrl+Z`  |
-| [`M_CUT`](./noroadsleft.c#L83-L87)    | `Ctrl+X`  |
-| [`M_COPY`](./noroadsleft.c#L88-L92)   | `Ctrl+C`  |
-| [`M_PASTE`](./noroadsleft.c#L93-L101) | `Ctrl+V`  |
+| [`M_SALL`](./noroadsleft.c#L75-L79)   | `Ctrl+A`  |
+| [`M_UNDO`](./noroadsleft.c#L80-L88)   | `Ctrl+Z`  |
+| [`M_CUT`](./noroadsleft.c#L89-L93)    | `Ctrl+X`  |
+| [`M_COPY`](./noroadsleft.c#L94-L98)   | `Ctrl+C`  |
+| [`M_PASTE`](./noroadsleft.c#L99-L107) | `Ctrl+V`  |
 
 ### [Emulated Non-US Backslash](./noroadsleft.c#L27-L37)
 
@@ -47,18 +50,18 @@ This macro simulates the Non-US Backslash key if I hold Right Alt and tap the ke
 
 Requires defining `ANSI_NUBS_ROW` and `ANSI_NUBS_COL` in `config.h` at the keymap level.[<sup>1</sup>](#footnotes)
 
-### [Emulated Numeric Keypad](./noroadsleft.c#L102-L116)
+### [Emulated Numeric Keypad](./noroadsleft.c#L108-L122)
 
 If I hold the Right Alt key, the number row (`KC_1` through `KC_0`) will output numpad keycodes instead of number row keycodes, enabling quicker access to characters like ™ and °.
 
-### [Emulated Extended Function Keys](./noroadsleft.c#L117-L131)
+### [Emulated Extended Function Keys](./noroadsleft.c#L123-L137)
 
 Similar to the emulated numpad, if I hold the Right Alt key with the Fn key, the function row (`KC_F1` through `KC_F12`) will output keycodes `KC_F13` throught `KC_F24`.
 
 
 ## License
 
-Copyright 2020-2021 James Young (@noroadsleft)
+Copyright 2020-2022 James Young (@noroadsleft)
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by

users/talljoe/config.h

@@ -19,9 +19,5 @@
 
 #define RESET_LAYER 15
 
-#define BOOTMAGIC_KEY_SALT KC_ESC
-#define BOOTMAGIC_KEY_SKIP KC_I
-#define BOOTMAGIC_KEY_EEPROM_CLEAR KC_E
-
 #define COMBO_COUNT 2
 #define COMBO_TERM 250

users/tominabox1/config.h

@@ -3,8 +3,6 @@
 // Tapping term settings
 #define TAPPING_TERM_PER_KEY
 #define TAP_HOLD_CAPS_DELAY 350
-#define BOOTMAGIC_KEY_SALT KC_BSPACE
-#define BOOTMAGIC_KEY_EEPROM_CLEAR KC_Q
 
 // OLED settings
 #define OLED_FONT_H "users/tominabox1/doug.c"