Add missing mcuconf.h and halconf.h to onekey:joystick keymap.

Add suggested fixes from PR.

docs/feature_joystick.md

@@ -1,8 +1,8 @@
-## Joystick HID Device
+## Joystick
 
-The keyboard can be made to be recognized as a joystick HID device by the Operating System.
+The keyboard can be made to be recognized as a joystick HID device by the operating system.
 
-This is enabled by adding the following to `rules.mk`
+This is enabled by adding the following to `rules.mk`:
 
 ```makefile
 JOYSTICK_ENABLE = yes
@@ -10,7 +10,7 @@ JOYSTICK_ENABLE = yes
 
 !> Joystick support is not currently available on V-USB devices.
 
-The joystick feature provides two services :
+The joystick feature provides two services:
  * reading an analog input device
  * sending gamepad HID reports
 

keyboards/handwired/onekey/keymaps/joystick/halconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#    define HALCONF_H
+
+#    define _CHIBIOS_HAL_CONF_
+#    define _CHIBIOS_HAL_CONF_VER_7_0_
+
+#    include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#    if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#        define HAL_USE_PAL TRUE
+#    endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#    if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#        define HAL_USE_ADC TRUE
+#    endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#    if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#        define HAL_USE_CAN FALSE
+#    endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#    if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#        define HAL_USE_CRY FALSE
+#    endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#    if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#        define HAL_USE_DAC TRUE
+#    endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#    if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#        define HAL_USE_GPT TRUE
+#    endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#    if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#        define HAL_USE_I2C TRUE
+#    endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#    if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#        define HAL_USE_I2S FALSE
+#    endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#    if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#        define HAL_USE_ICU FALSE
+#    endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#    if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#        define HAL_USE_MAC FALSE
+#    endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#    if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#        define HAL_USE_MMC_SPI FALSE
+#    endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#    if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#        define HAL_USE_PWM TRUE
+#    endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#    if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#        define HAL_USE_RTC FALSE
+#    endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#    if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#        define HAL_USE_SDC FALSE
+#    endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#    if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#        define HAL_USE_SERIAL FALSE
+#    endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#    if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#        define HAL_USE_SERIAL_USB TRUE
+#    endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#    if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#        define HAL_USE_SIO FALSE
+#    endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#    if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#        define HAL_USE_SPI FALSE
+#    endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#    if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#        define HAL_USE_TRNG FALSE
+#    endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#    if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#        define HAL_USE_UART FALSE
+#    endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#    if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#        define HAL_USE_USB TRUE
+#    endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#    if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#        define HAL_USE_WDG FALSE
+#    endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#    if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#        define HAL_USE_WSPI FALSE
+#    endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#        define PAL_USE_CALLBACKS FALSE
+#    endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#        define PAL_USE_WAIT FALSE
+#    endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#        define ADC_USE_WAIT TRUE
+#    endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#        define ADC_USE_MUTUAL_EXCLUSION TRUE
+#    endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#    if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#        define CAN_USE_SLEEP_MODE TRUE
+#    endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#    if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#        define CAN_ENFORCE_USE_CALLBACKS FALSE
+#    endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#    if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#        define HAL_CRY_USE_FALLBACK FALSE
+#    endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#    if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#        define HAL_CRY_ENFORCE_FALLBACK FALSE
+#    endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#        define DAC_USE_WAIT TRUE
+#    endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#        define DAC_USE_MUTUAL_EXCLUSION TRUE
+#    endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#    if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#        define I2C_USE_MUTUAL_EXCLUSION TRUE
+#    endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the zero-copy API.
+ */
+#    if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#        define MAC_USE_ZERO_COPY FALSE
+#    endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#    if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#        define MAC_USE_EVENTS TRUE
+#    endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#    if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#        define MMC_NICE_WAITING TRUE
+#    endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#    if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#        define SDC_INIT_RETRY 100
+#    endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#    if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#        define SDC_MMC_SUPPORT FALSE
+#    endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#    if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#        define SDC_NICE_WAITING TRUE
+#    endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#    if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#        define SDC_INIT_OCR_V20 0x50FF8000U
+#    endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#    if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#        define SDC_INIT_OCR 0x80100000U
+#    endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#    if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#        define SERIAL_DEFAULT_BITRATE 38400
+#    endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#    if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#        define SERIAL_BUFFERS_SIZE 16
+#    endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#    if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#        define SERIAL_USB_BUFFERS_SIZE 1
+#    endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#    if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#        define SERIAL_USB_BUFFERS_NUMBER 2
+#    endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#        define SPI_USE_WAIT TRUE
+#    endif
+
+/**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#        define SPI_USE_CIRCULAR FALSE
+#    endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#        define SPI_USE_MUTUAL_EXCLUSION TRUE
+#    endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#        define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#    endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#        define UART_USE_WAIT FALSE
+#    endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#        define UART_USE_MUTUAL_EXCLUSION FALSE
+#    endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#        define USB_USE_WAIT TRUE
+#    endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#        define WSPI_USE_WAIT TRUE
+#    endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#    if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#        define WSPI_USE_MUTUAL_EXCLUSION TRUE
+#    endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/handwired/onekey/keymaps/joystick/mcuconf.h

@@ -0,0 +1,273 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+#define STM32F303_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 9
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_USART2SW STM32_USART2SW_PCLK
+#define STM32_USART3SW STM32_USART3SW_PCLK
+#define STM32_UART4SW STM32_UART4SW_PCLK
+#define STM32_UART5SW STM32_UART5SW_PCLK
+#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED TRUE
+#define STM32_USBPRE STM32_USBPRE_DIV1P5
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY 6
+#define STM32_IRQ_EXTI1_PRIORITY 6
+#define STM32_IRQ_EXTI2_PRIORITY 6
+#define STM32_IRQ_EXTI3_PRIORITY 6
+#define STM32_IRQ_EXTI4_PRIORITY 6
+#define STM32_IRQ_EXTI5_9_PRIORITY 6
+#define STM32_IRQ_EXTI10_15_PRIORITY 6
+#define STM32_IRQ_EXTI16_PRIORITY 6
+#define STM32_IRQ_EXTI17_PRIORITY 15
+#define STM32_IRQ_EXTI18_PRIORITY 6
+#define STM32_IRQ_EXTI19_PRIORITY 15
+#define STM32_IRQ_EXTI20_PRIORITY 15
+#define STM32_IRQ_EXTI21_22_29_PRIORITY 6
+#define STM32_IRQ_EXTI30_32_PRIORITY 6
+#define STM32_IRQ_EXTI33_PRIORITY 6
+#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7
+#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7
+#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
+#define STM32_IRQ_TIM1_CC_PRIORITY 7
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE FALSE
+#define STM32_ADC_COMPACT_SAMPLES FALSE
+#define STM32_ADC_USE_ADC1 TRUE
+#define STM32_ADC_USE_ADC2 FALSE
+#define STM32_ADC_USE_ADC3 FALSE
+#define STM32_ADC_USE_ADC4 FALSE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC2_DMA_PRIORITY 2
+#define STM32_ADC_ADC3_DMA_PRIORITY 2
+#define STM32_ADC_ADC4_DMA_PRIORITY 2
+#define STM32_ADC_ADC12_IRQ_PRIORITY 5
+#define STM32_ADC_ADC3_IRQ_PRIORITY 5
+#define STM32_ADC_ADC4_IRQ_PRIORITY 5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE FALSE
+#define STM32_DAC_USE_DAC1_CH1 TRUE
+#define STM32_DAC_USE_DAC1_CH2 TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM6 TRUE
+#define STM32_GPT_USE_TIM7 TRUE
+#define STM32_GPT_USE_TIM8 TRUE
+#define STM32_GPT_USE_TIM15 FALSE
+#define STM32_GPT_USE_TIM16 FALSE
+#define STM32_GPT_USE_TIM17 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM6_IRQ_PRIORITY 7
+#define STM32_GPT_TIM7_IRQ_PRIORITY 7
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 TRUE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 10
+#define STM32_I2C_I2C2_IRQ_PRIORITY 10
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM8 FALSE
+#define STM32_ICU_USE_TIM15 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 TRUE
+#define STM32_PWM_USE_TIM4 TRUE
+#define STM32_PWM_USE_TIM8 FALSE
+#define STM32_PWM_USE_TIM15 FALSE
+#define STM32_PWM_USE_TIM16 FALSE
+#define STM32_PWM_USE_TIM17 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_PRESA_VALUE 32
+#define STM32_RTC_PRESS_VALUE 1024
+#define STM32_RTC_CR_INIT 0
+#define STM32_RTC_TAMPCR_INIT 0
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 
+#define STM32_SERIAL_USE_USART3 FALSE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_UART4_PRIORITY 12
+#define STM32_SERIAL_UART5_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#endif /* MCUCONF_H */

quantum/joystick.h

@@ -25,9 +25,9 @@
     { OUTPUT_PIN, INPUT_PIN, GROUND_PIN, LOW, REST, HIGH }
 
 typedef struct {
-    uint32_t output_pin;
-    uint32_t input_pin;
-    uint32_t ground_pin;
+    pin_t output_pin;
+    pin_t input_pin;
+    pin_t ground_pin;
 
     // the AVR ADC offers 10 bit precision, with significant bits on the higher part
     uint16_t min_digit;

quantum/process_keycode/process_joystick.c

@@ -41,7 +41,7 @@ bool process_joystick_buttons(uint16_t keycode, keyrecord_t *record) {
     return true;
 }
 
-uint16_t savePinState(uint32_t pin) {
+uint16_t savePinState(pin_t pin) {
 #ifdef __AVR__
     uint8_t pinNumber = pin & 0xF;
     return ((PORTx_ADDRESS(pin) >> pinNumber) & 0x1) << 1 | ((DDRx_ADDRESS(pin) >> pinNumber) & 0x1);
@@ -62,8 +62,8 @@ uint16_t savePinState(uint32_t pin) {
 #endif
 }
 
-void restorePinState(uint32_t pin, uint16_t restoreState) {
-#ifdef __AVR__
+void restorePinState(pin_t pin, uint16_t restoreState) {
+#if defined(PROTOCOL_LUFA)
     uint8_t pinNumber  = pin & 0xF;
     PORTx_ADDRESS(pin) = (PORTx_ADDRESS(pin) & ~_BV(pinNumber)) | (((restoreState >> 1) & 0x1) << pinNumber);
     DDRx_ADDRESS(pin)  = (DDRx_ADDRESS(pin) & ~_BV(pinNumber)) | ((restoreState & 0x1) << pinNumber);
@@ -135,17 +135,17 @@ bool process_joystick_analogread_quantum() {
         //test the converted value against the lower range
         int32_t ref = joystick_axes[axis_index].mid_digit;
         int32_t range = joystick_axes[axis_index].min_digit;
-        int32_t ranged_val = ((axis_val - ref)* -127)/(range - ref) ;
+        int32_t ranged_val = ((axis_val - ref) * -127) / (range - ref) ;
 
-        if (ranged_val > 0){
+        if (ranged_val > 0) {
             //the value is in the higher range
             range = joystick_axes[axis_index].max_digit;
-            ranged_val = ((axis_val - ref)* 127)/(range - ref);
+            ranged_val = ((axis_val - ref) * 127) / (range - ref);
         }
         
         //clamp the result in the valid range
-        ranged_val = ranged_val<-127 ? -127 : ranged_val;
-        ranged_val = ranged_val>127 ? 127 : ranged_val;
+        ranged_val = ranged_val < -127 ? -127 : ranged_val;
+        ranged_val = ranged_val > 127 ? 127 : ranged_val;
         
         if (ranged_val != joystick_status.axes[axis_index]) {
             joystick_status.axes[axis_index] = ranged_val;

tmk_core/protocol/usb_descriptor.c

@@ -344,6 +344,7 @@ const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = {
         .Type                   = DTYPE_Device
     },
     .USBSpecification           = VERSION_BCD(1, 1, 0),
+    
 #if VIRTSER_ENABLE
     .Class                      = USB_CSCP_IADDeviceClass,
     .SubClass                   = USB_CSCP_IADDeviceSubclass,