Remove HD44780 References, Part 2 (#9918)

* remove HD44780_ENABLE rules: C-F

* remove HD44780_ENABLE config: C-F

keyboards/cannonkeys/obliterated75/rules.mk

@@ -17,7 +17,6 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 WS2812_DRIVER = spi
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread

keyboards/chidori/config.h

@@ -220,34 +220,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/chidori/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no        # Enable support for HD44780 based LCDs
 
 CUSTOM_MATRIX = lite
 

keyboards/chimera_ortho_plus/rules.mk

@@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 UNICODE_ENABLE = yes
 CUSTOM_MATRIX = yes
 

keyboards/choco60/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 SPLIT_KEYBOARD = yes        # Enable split keyboard

keyboards/ckeys/washington/config.h

@@ -219,34 +219,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ckeys/washington/rules.mk

@@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 ENCODER_ENABLE = yes        # Enable support for encoders
 OLED_DRIVER_ENABLE = yes    # Enable support for OLED displays

keyboards/clawsome/bookerboard/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no          # Unicode
 BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no          # Enable support for HD44780 based LCDs

keyboards/cocoa40/rules.mk

@@ -30,5 +30,4 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 SPLIT_KEYBOARD = yes

keyboards/converter/modelm101/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/converter/numeric_keypad_IIe/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/converter/usb_usb/ble/rules.mk

@@ -17,7 +17,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 BLUETOOTH = AdafruitBLE
 ADAFRUIT_BLE_ENABLE = yes
 

keyboards/copenhagen_click/click_pad_v1/config.h

@@ -218,34 +218,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/copenhagen_click/click_pad_v1/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/coseyfannitutti/discipad/config.h

@@ -215,34 +215,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0

keyboards/coseyfannitutti/discipad/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/coseyfannitutti/discipline/config.h

@@ -213,34 +213,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0

keyboards/coseyfannitutti/discipline/rules.mk

@@ -33,6 +33,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker

keyboards/coseyfannitutti/mullet/config.h

@@ -142,30 +142,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/coseyfannitutti/mullet/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/coseyfannitutti/mulletpad/config.h

@@ -142,30 +142,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/coseyfannitutti/mulletpad/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = numpad_5x4

keyboards/coseyfannitutti/mysterium/config.h

@@ -211,34 +211,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0

keyboards/coseyfannitutti/mysterium/rules.mk

@@ -33,6 +33,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 LAYOUTS = tkl_ansi

keyboards/coseyfannitutti/romeo/config.h

@@ -214,34 +214,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0

keyboards/coseyfannitutti/romeo/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/cospad/config.h

@@ -219,34 +219,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/cospad/rules.mk

@@ -29,6 +29,5 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 LAYOUTS = numpad_6x4 ortho_6x4

keyboards/cu80/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 LAYOUTS = tkl_iso tkl_ansi

keyboards/cutie_club/wraith/config.h

@@ -216,34 +216,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/cutie_club/wraith/rules.mk

@@ -27,4 +27,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs

keyboards/daisy/config.h

@@ -218,34 +218,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/daisy/rules.mk

@@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/dc01/arrow/rules.mk

@@ -29,7 +29,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 NO_USB_STARTUP_CHECK = yes  # Disable initialization only when usb is plugged in
 CUSTOM_MATRIX = yes         # Use custom matrix
 SRC += matrix.c \

keyboards/dc01/left/rules.mk

@@ -29,7 +29,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 CUSTOM_MATRIX = yes         # Use custom matrix
 SRC += matrix.c \
        i2c_master.c

keyboards/dc01/numpad/rules.mk

@@ -29,7 +29,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 NO_USB_STARTUP_CHECK = yes  # Disable initialization only when usb is plugged in
 CUSTOM_MATRIX = yes         # Use custom matrix
 SRC += matrix.c \

keyboards/dc01/right/rules.mk

@@ -29,7 +29,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 NO_USB_STARTUP_CHECK = yes  # Disable initialization only when usb is plugged in
 CUSTOM_MATRIX = yes         # Use custom matrix
 SRC += matrix.c \

keyboards/deltasplit75/rules.mk

@@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 SPLIT_KEYBOARD = yes
 

keyboards/dm9records/plaid/config.h

@@ -215,34 +215,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/dm9records/plaid/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_4x12 planck_mit
 LAYOUTS_HAS_RGB = no

keyboards/dm9records/tartan/config.h

@@ -213,34 +213,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/dm9records/tartan/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift
 LAYOUTS_HAS_RGB = no

keyboards/dmqdesign/spin/rules.mk

@@ -30,5 +30,4 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 ENCODER_ENABLE = yes        # Enable rotary encoder support

keyboards/doppelganger/rules.mk

@@ -30,5 +30,4 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 SPLIT_KEYBOARD = yes

keyboards/doro67/multi/rules.mk

@@ -29,6 +29,5 @@ UNICODE_ENABLE = no          # Unicode
 BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no          # Enable support for HD44780 based LCDs
 
 LAYOUTS = 65_ansi_blocker

keyboards/doro67/regular/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = 65_ansi_blocker

keyboards/doro67/rgb/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 RGB_MATRIX_ENABLE = WS2812
 
 LAYOUTS = 65_ansi_blocker

keyboards/dozen0/config.h

@@ -189,34 +189,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/dozen0/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/duck/jetfire/config.h

@@ -167,30 +167,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/duck/jetfire/rules.mk

@@ -31,7 +31,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 CUSTOM_MATRIX = yes
 SRC += indicator_leds.c \

keyboards/dumbpad/config.h

@@ -230,34 +230,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/dumbpad/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 ENCODER_ENABLE = yes
 MOUSEKEY_ENABLE = yes

keyboards/dztech/dz60rgb/v1/rules.mk

@@ -19,6 +19,5 @@ MIDI_ENABLE = no               # MIDI support
 BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no              # Audio output on port C6
 FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
 RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
 NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in

keyboards/dztech/dz60rgb/v2/rules.mk

@@ -29,6 +29,5 @@ MIDI_ENABLE = no               # MIDI support
 BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no              # Audio output on port C6
 FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
 RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
 NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in

keyboards/dztech/dz60rgb_ansi/v1/rules.mk

@@ -19,6 +19,5 @@ MIDI_ENABLE = no               # MIDI support
 BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no              # Audio output on port C6
 FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
 RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
 NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in

keyboards/dztech/dz60rgb_ansi/v2/rules.mk

@@ -29,6 +29,5 @@ MIDI_ENABLE = no               # MIDI support
 BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no              # Audio output on port C6
 FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
 RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
 NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in

keyboards/dztech/dz60rgb_wkl/v1/rules.mk

@@ -19,7 +19,6 @@ MIDI_ENABLE = no               # MIDI support
 BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no              # Audio output on port C6
 FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
 RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
 NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in
 

keyboards/dztech/dz60rgb_wkl/v2/rules.mk

@@ -29,7 +29,6 @@ MIDI_ENABLE = no               # MIDI support
 BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no              # Audio output on port C6
 FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
 RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
 NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in
 

keyboards/dztech/dz65rgb/v1/rules.mk

@@ -19,7 +19,6 @@ MIDI_ENABLE = no               # MIDI support
 BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no              # Audio output on port C6
 FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
 RGB_MATRIX_ENABLE = IS31FL3731 # Use RGB matrix
 
 LAYOUTS = 65_ansi

keyboards/dztech/dz65rgb/v2/rules.mk

@@ -29,7 +29,6 @@ MIDI_ENABLE = no               # MIDI support
 BLUETOOTH_ENABLE = no          # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no              # Audio output on port C6
 FAUXCLICKY_ENABLE = no         # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no            # Enable support for HD44780 based LCDs
 RGB_MATRIX_ENABLE = IS31FL3731 # Use RGB matrix
 
 LAYOUTS = 65_ansi

keyboards/efreet/config.h

@@ -212,34 +212,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/efreet/rules.mk

@@ -27,6 +27,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_4x12 planck_mit

keyboards/eniigmakeyboards/ek87/config.h

@@ -217,34 +217,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/eniigmakeyboards/ek87/rules.mk

@@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/ep/40/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/ep/96/config.h

@@ -176,30 +176,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/ep/96/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/ep/comsn/hs68/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/ep/comsn/mollydooker/config.h

@@ -185,30 +185,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/

keyboards/ep/comsn/mollydooker/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/ep/comsn/tf_longeboye/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/ergo42/rules.mk

@@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 SPLIT_KEYBOARD = yes
 

keyboards/ergosaurus/config.h

@@ -218,34 +218,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ergosaurus/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/ericrlau/numdiscipline/rev1/config.h

@@ -215,34 +215,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ericrlau/numdiscipline/rev1/rules.mk

@@ -33,4 +33,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/exclusive/e6v2/le_bmc/rules.mk

@@ -31,4 +31,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/exclusive/e6v2/oe_bmc/rules.mk

@@ -31,4 +31,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/exclusive/e7v1se/config.h

@@ -218,34 +218,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/exclusive/e7v1se/rules.mk

@@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/felix/config.h

@@ -199,34 +199,6 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/felix/rules.mk

@@ -29,6 +29,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_5x4

keyboards/fluorite/config.h

@@ -211,34 +211,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/fluorite/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 SPLIT_KEYBOARD = yes

keyboards/flx/lodestone/rules.mk

@@ -29,7 +29,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 LTO_ENABLE = yes
 
 LAYOUTS = 65_ansi_blocker 65_iso_blocker

keyboards/flx/virgo/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no          # Unicode
 BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no          # Enable support for HD44780 based LCDs
 LINK_TIME_OPTIMIZATION_ENABLE = yes
 

keyboards/fortitude60/rules.mk

@@ -29,7 +29,6 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 SPLIT_KEYBOARD = yes
 

keyboards/foxlab/leaf60/hotswap/config.h

@@ -196,34 +196,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/foxlab/leaf60/hotswap/rules.mk

@@ -30,4 +30,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/foxlab/leaf60/universal/config.h

@@ -196,34 +196,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0

keyboards/foxlab/leaf60/universal/rules.mk

@@ -30,6 +30,5 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 LAYOUTS = 60_ansi 60_hhkb

keyboards/freyr/rules.mk

@@ -30,7 +30,6 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 # Supported layouts
 LAYOUTS = tkl_ansi tkl_iso

keyboards/funky40/rules.mk

@@ -29,4 +29,3 @@ MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs