Use core `spi_init` implementation for gmmk/gmmk2/p96 (#26344)

keyboards/gmmk/gmmk2/p96/ansi/ansi.c

@@ -152,27 +152,3 @@ const aw20216s_led_t PROGMEM g_aw20216s_leds[AW20216S_LED_COUNT] = {
     {1, SW10_CS16, SW10_CS17, SW10_CS18}  //  120, LED 20
 };
 #endif
-
-#ifdef EEPROM_ENABLE
-
-#include "spi_master.h"
-
-void spi_init(void) {
-    static bool is_initialised = false;
-    if (!is_initialised) {
-        is_initialised = true;
-
-        // Try releasing special pins for a short time
-        gpio_set_pin_input(SPI_SCK_PIN);
-        gpio_set_pin_input(SPI_MOSI_PIN);
-        gpio_set_pin_input(SPI_MISO_PIN);
-
-        chThdSleepMilliseconds(10);
-
-        palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST | PAL_WB32_CURRENT_LEVEL3);
-        palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST);
-        palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST);
-    }
-}
-
-#endif

keyboards/gmmk/gmmk2/p96/iso/iso.c

@@ -153,27 +153,3 @@ const aw20216s_led_t PROGMEM g_aw20216s_leds[AW20216S_LED_COUNT] = {
     {1, SW10_CS16, SW10_CS17, SW10_CS18}  // 120, LED 20
 };
 #endif
-
-#ifdef EEPROM_ENABLE
-
-#include "spi_master.h"
-
-void spi_init(void) {
-    static bool is_initialised = false;
-    if (!is_initialised) {
-        is_initialised = true;
-
-        // Try releasing special pins for a short time
-        gpio_set_pin_input(SPI_SCK_PIN);
-        gpio_set_pin_input(SPI_MOSI_PIN);
-        gpio_set_pin_input(SPI_MISO_PIN);
-
-        chThdSleepMilliseconds(10);
-
-        palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST | PAL_WB32_CURRENT_LEVEL3);
-        palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST);
-        palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST);
-    }
-}
-
-#endif