input_club/infinity60: remove custom 3731 code, convert to LED Matrix (#22117)

* input_club/infinity60: remove custom 3731 code, convert to LED Matrix

* Add licences

keyboards/input_club/infinity60/halconf.h

@@ -1,27 +0,0 @@
-/* Copyright 2020 QMK
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/*
- * This file was auto-generated by:
- *    `qmk chibios-confmigrate -i keyboards/infinity60/halconf.h -r platforms/chibios/common/configs/halconf.h`
- */
-
-#pragma once
-
-#define HAL_USE_I2C TRUE
-
-#include_next <halconf.h>
-

keyboards/input_club/infinity60/keymaps/default/keymap.c

@@ -1,3 +1,6 @@
+// Copyright 2023 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

keyboards/input_club/infinity60/keymaps/jpetermans/config.h

@@ -1,6 +0,0 @@
-#pragma once
-
-//overrides
-#undef TAPPING_TOGGLE
-#define TAPPING_TOGGLE 2
-

keyboards/input_club/infinity60/keymaps/jpetermans/keymap.c

@@ -1,264 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "led_controller.h"
-
-//Define Layer Names
-#define _BASE 0
-#define _NUMPAD 1
-#define _FNAV 2
-#define _MEDIA 3
-#define _TILDE 4
-
-//IS31 chip has 8 available led pages, using 0 for all leds and 7 for single toggles
-#define max_pages 6
-
-enum led_modes {
-  MODE_ALL,
-  MODE_GAME,
-  MODE_SINGLE,
-  MODE_PAGE,
-  MODE_FLASH
-};
-
-enum macro_id {
-  LED_ALL = SAFE_RANGE,
-  LED_GAME,
-  LED_BACKLIGHT,
-  LED_BRIGHT,
-  LED_DIM,
-  LED_SINGLE,
-  LED_PAGE,
-  LED_FLASH
-};
-
-uint8_t current_layer_global = 0;
-uint8_t led_mode_global = MODE_SINGLE;
-uint8_t backlight_status_global = 1; //init on/off state of backlight
-uint32_t led_layer_state = 0;
-
-/* ==================================
- *             KEYMAPS
- * ==================================*/
-
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Layer 0: Default Layer
-     * ,-----------------------------------------------------------.
-     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  Backs|
-     * |-----------------------------------------------------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-     * |-----------------------------------------------------------|
-     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |
-     * |-----------------------------------------------------------|
-     * |Shif|   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
-     * |-----------------------------------------------------------|
-     * |Ctrl|Gui |Alt |         Space    |Alt |Gui |  FN  | Ctrl   |
-     * `-----------------------------------------------------------'
-     */
-    /* default */
-    [_BASE] = LAYOUT_60_ansi_split_bs_rshift(
-        KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSLS,KC_NO,
-        KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC,
-        TT(_FNAV), KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT,
-        KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,LM(_TILDE, MOD_LSFT),KC_NO,
-        KC_LCTL,   KC_LGUI,KC_LALT,            LT(_FNAV, KC_SPC),       KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL
-    ),
-
-    /* numpad */
-    [_NUMPAD] = LAYOUT_60_ansi_split_bs_rshift(
-        _______,_______,_______,_______,_______,_______,_______, KC_P7, KC_P8, KC_P9, KC_PSLS, _______,_______,_______,KC_NO,
-        _______,_______,_______,_______,_______,_______,_______, KC_P4, KC_P5, KC_P6, KC_PAST, _______,_______,_______,
-        MO(_FNAV),_______,_______,_______,_______,_______,_______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______,_______,
-        _______,_______,_______,_______,_______,_______,_______, KC_P0,KC_COMM,KC_PDOT,KC_PPLS, _______,KC_NO,
-        _______,_______,_______,               TO(_BASE),           _______,_______,_______,_______
-    ),
-
-    /* F-, arrow, and media keys */
-    [_FNAV] = LAYOUT_60_ansi_split_bs_rshift(
-        KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, _______,KC_NO,
-        KC_CAPS,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,_______,_______,KC_DEL,
-        _______,_______,KC_BTN2,_______,_______,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,_______,_______,
-        _______,KC_APP,KC_BTN1,KC_CALC,_______,_______,KC_END,_______,_______,_______,_______,_______,KC_NO,
-        _______,_______,_______,               _______,         C(A(KC_DEL)),KC_NUM,_______,_______
-    ),
-
-    /* media */
-    [_MEDIA] = LAYOUT_60_ansi_split_bs_rshift(
-        _______,LED_SINGLE,LED_PAGE,LED_FLASH,_______,_______,_______, _______, _______, _______,KC_MUTE, KC_VOLD, KC_VOLU,_______,KC_NO,
-        _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,
-        _______,_______,_______,_______,_______,LED_GAME,_______, _______, _______, _______,_______, _______,_______,
-        _______,_______,LED_ALL ,LED_BRIGHT,LED_DIM,LED_BACKLIGHT,_______, _______, KC_MPRV, KC_MNXT,KC_MSTP, _______,KC_NO,
-        _______,_______,_______,               KC_MPLY,             _______,_______, _______,_______
-    ),
-    /* ~ */
-    [_TILDE] = LAYOUT_60_ansi_split_bs_rshift(
-        KC_GRV,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,KC_NO,
-        _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,
-        _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,
-        _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,KC_NO,
-        _______,_______,_______,               _______,             _______,_______, _______,_______
-    ),
-    /* template */
-    [5] = LAYOUT_60_ansi_split_bs_rshift(
-        _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,KC_NO,
-        _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,
-        _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,
-        _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,KC_NO,
-        _______,_______,_______,               _______,             _______,_______, _______,_______
-    ),
-};
-
-/* ==================================
- *          LED MAPPING
- * ==================================*/
-
-/*
-    Infinity60 LED MAP
-    11 12 13 14 15 16 17 18 21 22 23 24 25  26 27*
-     28 31 32 33 34 35 36 37 38 41 42 43 44 45
-     46 47 48 51 52 53 54 55 56 57 58 61    62
-      63 64 65 66 67 68 71 72 73 74 75      76 77*
-    78  81  82       83         84  85  86  87
-    *Unused in Alphabet Layout
-*/
-
-//======== full page arrays =========
-//any change in array size needs to be mirrored in matrix_init_user
-uint8_t led_numpad[16] = {
-  18,21,22,23,
-  37,38,41,42,
-  55,56,57,58,
-  72,73,74,75
-};
-//LED Page 2 - _Nav
-uint8_t led_nav[12] = {
-                        38,
-  47,48,              55,56,57,
-     64,65,66
-};
-//LED Page 3 - _Media
-uint8_t led_media[15] = {
-  12,13,14,           23,24,25,
-     65,66,67,68,    73,74,75,
-           83,          86
-};
-//LED Page 4 - _Game "WASD"
-uint8_t led_game[5] = {
-  11,
-        32,
-     47,48,51
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  msg_t msg;
-
-  switch(keycode) {
-    case LED_ALL:
-      if(record->event.pressed) {
-        led_mode_global = led_mode_global == MODE_ALL ? MODE_SINGLE : MODE_ALL;
-        msg=TOGGLE_ALL;
-        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-      }
-      return false;
-
-    case LED_BACKLIGHT:
-      if(record->event.pressed) {
-        backlight_status_global ^= 1;
-        msg=(backlight_status_global << 8) | TOGGLE_BACKLIGHT;
-        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-      }
-      return false;
-
-    case LED_GAME:
-      if(record->event.pressed) {
-        led_mode_global = led_mode_global == MODE_GAME ? MODE_SINGLE : MODE_GAME;
-
-        msg=(4 << 8) | DISPLAY_PAGE;
-        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-      }
-      return false;
-
-    case LED_BRIGHT:
-      if(record->event.pressed) {
-        msg=(1 << 8) | STEP_BRIGHTNESS;
-        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-      }
-      return false;
-
-    case LED_DIM:
-      if(record->event.pressed) {
-        msg=(0 << 8) | STEP_BRIGHTNESS;
-        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-      }
-      return false;
-
-    //set led_mode for matrix_scan to toggle leds
-    case LED_SINGLE:
-      led_mode_global = MODE_SINGLE;
-      return false;
-    case LED_PAGE:
-      led_mode_global = MODE_PAGE;
-      return false;
-    case LED_FLASH:
-      led_mode_global = MODE_FLASH;
-      return false;
-
-  }
-  return true;
-}
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
-
-    led_controller_init();
-
-    // Write predefined led pages.
-    write_led_page(_NUMPAD, led_numpad, 16);
-    chThdSleepMilliseconds(10);
-
-    write_led_page(_FNAV, led_nav, 12);
-    chThdSleepMilliseconds(10);
-
-    write_led_page(_MEDIA, led_media, 15);
-    chThdSleepMilliseconds(10);
-
-    write_led_page(4, led_game, 5);
-    chThdSleepMilliseconds(1000);
-};
-
-// Loops constantly in the background.
-void matrix_scan_user(void) {
-  uint8_t page;
-  uint8_t led_pin_byte;
-  msg_t msg;
-
-  if (backlight_status_global == 0) {//backlight is off, skip the rest
-    return;
-  }
-
-  if (led_layer_state != layer_state && led_mode_global != MODE_GAME && led_mode_global != MODE_ALL) {
-    //check mode
-    //Turn on layer indicator or page depending on mode
-    switch(led_mode_global) {
-      case MODE_FLASH: //flash preset page leds then single indicator
-        page = get_highest_layer(layer_state) > max_pages ? 7 : get_highest_layer(layer_state);
-        msg=(page << 8) | DISPLAY_PAGE;
-        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-        chThdSleepMilliseconds(500);
-        //flow to display single layer leds
-
-      case MODE_SINGLE: //light layer indicators for all active layers
-        led_pin_byte = layer_state & 0xFF;
-        msg=(7 << 8) | DISPLAY_PAGE;
-        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-        msg=(1 << 16) | (led_pin_byte << 8) | SET_FULL_ROW;
-        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-        break;
-
-      case MODE_PAGE: //display pre-defined led page
-        page = get_highest_layer(layer_state) > max_pages ? 7 : get_highest_layer(layer_state);
-        msg=(page << 8) | DISPLAY_PAGE;
-        chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-        break;
-      }
-  led_layer_state = layer_state;
-  }
-}

keyboards/input_club/infinity60/keymaps/jpetermans/readme.md

@@ -1,87 +0,0 @@
-Backlight for Infinity60
-========================
-
-## Led Controller Specs
-
-The Infinity60 (revision 1.1a) pcb uses the IS31FL3731C matrix LED driver from ISSI [(datasheet)](http://www.issi.com/WW/pdf/31FL3731C.pdf). The IS31 has the ability to control two led matrices (A & B), each matrix controlling 9 pins, each pin controlling 8 leds. The Infinity only utilizes matrix A.
-
-Infinity60 LED Map:
-digits mean "row" and "col", i.e. 45 means pin 4, column 5 in the IS31 datasheet
-```c
-  11 12 13 14 15 16 17 18 21 22 23 24 25  26 27*
-   28 31 32 33 34 35 36 37 38 41 42 43 44 45
-   46 47 48 51 52 53 54 55 56 57 58 61    62
-   63 64 65 66 67 68 71 72 73 74 75      76 77*
-   78  81  82       83         84  85  86  87
-```
-*Unused in Alphabet Layout
-
-The IS31 includes 8 led pages (or frames) 0-7 than can be displayed, and each page consists of 144 bytes.
-- **bytes 0 - 17** - LED control (on/off).
-    * 18 bytes which alternate between A and B matrices (A1, B1, A2, B2, ..).
-    * Each byte controls the 8 leds on that pin with bits (8 to 1).
-- **bytes 8 - 35** - Blink control.
-    * Same as LED control above, but sets blink on/off.
-- **bytes 36 - 143** - PWM control.
-    * One byte per LED, sets PWM from 0 to 255.
-    * Same as above, the register alternates, every 8 *bytes* (not bits) between the A & B matrices.
-
-## Led Controller Code
-In the Infinity60 project folder, led_controller.c sets up ability to write led layers at startup or control leds on demand as part of fn_actions. By default led_controller.c assumes page 0 will be used for full on/off. The remaining 7 pages (1-7) are free for preset led maps or single led actions at init or on demand. Communication with the IS31 is primarily done through the led_mailbox using chMBPost described further below under "Sending messages in Keymap.c". This code is based on work matt3o and flabbergast did for tmk firmware on the [whitefox](https://github.com/tmk/whitefox).
-
-One function is available to directly set leds without the mailbox:
-```
-write_led_page(page#, array of leds by address, # of addresses in array)
-```
-This function saves a full page to the controller using a supplied array of led locations such as:
-```c
-uint8_t led_numpad[16] =  {
-  18,21,22,23,
-  37,38,41,42,
-  55,56,57,58,
-  72,73,74,75
-}
-write_led_page(5, led_numpad, 16);
-```
-
-Remaining led control is done through the led mailbox using these message types:
-- **SET_FULL_ROW** (3 bytes) - message type, 8-bit mask, and row#. Sets all leds on one pin per the bit mask.
-- **OFF_LED, ON_LED, TOGGLE_LED** (3 bytes) - message type, led address, and page#. Off/on/toggle specific led.
-- **BLINK_OFF_LED, BLINK_ON_LED, BLINK_TOGGLE_LED** (3 bytes) - message type, led address, and page#. Set blink Off/on/toggle for specific led.
-- **TOGGLE_ALL** (1 byte) - Turn on/off full backlight.
-- **TOGGLE_BACKLIGHT** (2 bytes) - message type, on/off. Sets backlight completely off, no leds will display.
-- **DISPLAY_PAGE** (2 bytes) - message type, page to display. Switch to specific pre-set page.
-- **RESET_PAGE** (2 bytes) - message type, page to reset. Reset/erase specific page.
-- **TOGGLE_NUM_LOCK** (2 bytes) - message type, on/off (NUM_LOCK_LED_ADDRESS). Toggle numlock on/off. Usually run with the `set_leds` function to check state of numlock or capslock. If all leds are on (e.i. TOGGLE_ALL) then this sets numlock to blink instead (this is still a little buggy if toggling on/off quickly).
-- **TOGGLE_CAPS_LOCK** (2 bytes) - message type, on/off (CAPS_LOCK_LED_ADDRESS). Same as numlock.
-- **STEP_BRIGHTNESS** (2 bytes) - message type, and step up (1) or step down (0). Increase or decrease led brightness.
-
-## Sending messages in Keymap.c
-Sending an action to the led mailbox is done using chMBPost:
-```
-chMBPost(&led_mailbox, message, timeout);
-```
-- &led_mailbox - pointer to led mailbox
-- message - up to 4 bytes but most messages use only 2. First byte (LSB) is the message type, the remaining three bytes are the message to process.
-- timeout is TIME_IMMEDIATE
-
-An example:
-```c
-//set the message to be sent. First byte (LSB) is the message type, and second is the led address
-msg=(42 << 8) | ON_LED;
-
-//send msg to the led mailbox
-chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-```
-
-Another:
-```c
-msg=(46 << 8) | BLINK_TOGGLE_LED;
-chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-```
-
-Finally, SET_FULL_ROW requires an extra byte with row information in the message so sending this message looks like:
-```c
-msg=(row<<16) | (led_pin_byte << 8) | SET_FULL_ROW;
-chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
-```

keyboards/input_club/infinity60/led.c

@@ -1,58 +0,0 @@
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-Copyright 2017 jpetermans <tibcmhhm@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <hal.h>
-
-#include "led.h"
-
-#include "led_controller.h"
-
-/* WARNING! This function needs to be callable from
- * both regular threads and ISRs, unlocked (during resume-from-sleep).
- * In particular, I2C functions (interrupt-driven) should NOT be called from here.
- */
-bool led_update_kb(led_t led_state) {
-    bool res = led_update_user(led_state);
-    if (res) {
-        msg_t msg;
-
-        if (led_state.num_lock) {
-            chSysUnconditionalLock();
-            msg=(1 << 8) | TOGGLE_NUM_LOCK;
-            chMBPostI(&led_mailbox, msg);
-            chSysUnconditionalUnlock();
-        } else {
-            chSysUnconditionalLock();
-            msg=(0 << 8) | TOGGLE_NUM_LOCK;
-            chMBPostI(&led_mailbox, msg);
-            chSysUnconditionalUnlock();
-        }
-        if (led_state.caps_lock) {
-            chSysUnconditionalLock();
-            msg=(1 << 8) | TOGGLE_CAPS_LOCK;
-            chMBPostI(&led_mailbox, msg);
-            chSysUnconditionalUnlock();
-        } else {
-            chSysUnconditionalLock();
-            msg=(0 << 8) | TOGGLE_CAPS_LOCK;
-            chMBPostI(&led_mailbox, msg);
-            chSysUnconditionalUnlock();
-        }
-    }
-    return false;
-}

keyboards/input_club/infinity60/led/config.h

@@ -0,0 +1,15 @@
+// Copyright 2023 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define LED_MATRIX_LED_COUNT 63
+
+#define IS31FL3731_DRIVER_COUNT 1
+#define LED_DRIVER_ADDR_1 IS31FL3731_I2C_ADDRESS_GND
+
+#define I2C1_CLOCK_SPEED 400000
+#define I2C1_SCL_PIN B0
+#define I2C1_SDA_PIN B1
+#define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
+#define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2

keyboards/input_club/infinity60/led/halconf.h

@@ -0,0 +1,8 @@
+// Copyright 2023 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+
+#include_next <halconf.h>

keyboards/input_club/infinity60/led/info.json

@@ -3,5 +3,97 @@
         "cols": ["C0", "C1", "C2", "C3", "C4", "C5", "C6", "C7", "D0"],
         "rows": ["D1", "D2", "D3", "D4", "D5", "D6", "D7"]
     },
-    "diode_direction": "COL2ROW"
+    "diode_direction": "COL2ROW",
+    "features": {
+        "led_matrix": true
+    },
+    "led_matrix": {
+        "driver": "is31fl3731",
+        "animations": {
+            "breathing": true,
+            "cycle_left_right": true,
+            "cycle_up_down": true,
+            "cycle_out_in": true,
+            "solid_reactive_simple": true,
+            "solid_reactive_wide": true,
+            "solid_reactive_multiwide": true,
+            "solid_reactive_cross": true,
+            "solid_reactive_multicross": true,
+            "solid_reactive_nexus": true,
+            "solid_reactive_multinexus": true,
+            "solid_splash": true,
+            "solid_multisplash": true,
+            "wave_left_right": true,
+            "wave_up_down": true
+        },
+        "layout": [
+            {"matrix": [0, 0], "x":   0, "y":  0, "flags": 1},
+            {"matrix": [0, 1], "x":  16, "y":  0, "flags": 4},
+            {"matrix": [0, 2], "x":  32, "y":  0, "flags": 4},
+            {"matrix": [0, 3], "x":  48, "y":  0, "flags": 4},
+            {"matrix": [0, 4], "x":  64, "y":  0, "flags": 4},
+            {"matrix": [0, 5], "x":  80, "y":  0, "flags": 4},
+            {"matrix": [0, 6], "x":  96, "y":  0, "flags": 4},
+            {"matrix": [0, 7], "x": 112, "y":  0, "flags": 4},
+            {"matrix": [0, 8], "x": 128, "y":  0, "flags": 4},
+            {"matrix": [1, 0], "x": 144, "y":  0, "flags": 4},
+            {"matrix": [1, 1], "x": 160, "y":  0, "flags": 4},
+            {"matrix": [1, 2], "x": 176, "y":  0, "flags": 4},
+            {"matrix": [1, 3], "x": 192, "y":  0, "flags": 4},
+            {"matrix": [1, 4], "x": 208, "y":  0, "flags": 1},
+            {"matrix": [1, 5], "x": 224, "y":  0, "flags": 1},
+
+            {"matrix": [1, 6], "x":   0, "y": 16, "flags": 1},
+            {"matrix": [1, 7], "x":  17, "y": 16, "flags": 4},
+            {"matrix": [1, 8], "x":  35, "y": 16, "flags": 4},
+            {"matrix": [2, 0], "x":  52, "y": 16, "flags": 4},
+            {"matrix": [2, 1], "x":  69, "y": 16, "flags": 4},
+            {"matrix": [2, 2], "x":  86, "y": 16, "flags": 4},
+            {"matrix": [2, 3], "x": 103, "y": 16, "flags": 4},
+            {"matrix": [2, 4], "x": 121, "y": 16, "flags": 4},
+            {"matrix": [2, 5], "x": 138, "y": 16, "flags": 4},
+            {"matrix": [2, 6], "x": 155, "y": 16, "flags": 4},
+            {"matrix": [2, 7], "x": 172, "y": 16, "flags": 4},
+            {"matrix": [2, 8], "x": 190, "y": 16, "flags": 4},
+            {"matrix": [3, 0], "x": 207, "y": 16, "flags": 4},
+            {"matrix": [3, 1], "x": 224, "y": 16, "flags": 4},
+
+            {"matrix": [3, 2], "x":   0, "y": 32, "flags": 9},
+            {"matrix": [3, 3], "x":  19, "y": 32, "flags": 4},
+            {"matrix": [3, 4], "x":  37, "y": 32, "flags": 4},
+            {"matrix": [3, 5], "x":  56, "y": 32, "flags": 4},
+            {"matrix": [3, 6], "x":  75, "y": 32, "flags": 4},
+            {"matrix": [3, 7], "x":  93, "y": 32, "flags": 4},
+            {"matrix": [3, 8], "x": 112, "y": 32, "flags": 4},
+            {"matrix": [4, 0], "x": 131, "y": 32, "flags": 4},
+            {"matrix": [4, 1], "x": 149, "y": 32, "flags": 4},
+            {"matrix": [4, 2], "x": 168, "y": 32, "flags": 4},
+            {"matrix": [4, 3], "x": 187, "y": 32, "flags": 4},
+            {"matrix": [4, 4], "x": 205, "y": 32, "flags": 4},
+            {"matrix": [4, 5], "x": 224, "y": 32, "flags": 1},
+
+            {"matrix": [4, 6], "x":   0, "y": 48, "flags": 1},
+            {"matrix": [4, 7], "x":  19, "y": 48, "flags": 4},
+            {"matrix": [4, 8], "x":  37, "y": 48, "flags": 4},
+            {"matrix": [5, 0], "x":  56, "y": 48, "flags": 4},
+            {"matrix": [5, 1], "x":  75, "y": 48, "flags": 4},
+            {"matrix": [5, 2], "x":  93, "y": 48, "flags": 4},
+            {"matrix": [5, 3], "x": 112, "y": 48, "flags": 4},
+            {"matrix": [5, 4], "x": 131, "y": 48, "flags": 4},
+            {"matrix": [5, 5], "x": 149, "y": 48, "flags": 4},
+            {"matrix": [5, 6], "x": 168, "y": 48, "flags": 4},
+            {"matrix": [5, 7], "x": 187, "y": 48, "flags": 4},
+            {"matrix": [5, 8], "x": 205, "y": 48, "flags": 1},
+            {"matrix": [6, 0], "x": 224, "y": 48, "flags": 1},
+
+            {"matrix": [6, 1], "x":   0, "y": 64, "flags": 1},
+            {"matrix": [6, 2], "x":  32, "y": 64, "flags": 1},
+            {"matrix": [6, 3], "x":  64, "y": 64, "flags": 1},
+            {"matrix": [6, 4], "x":  96, "y": 64, "flags": 4},
+            {"matrix": [6, 5], "x": 128, "y": 64, "flags": 1},
+            {"matrix": [6, 6], "x": 160, "y": 64, "flags": 1},
+            {"matrix": [6, 7], "x": 192, "y": 64, "flags": 1},
+            {"matrix": [6, 8], "x": 224, "y": 64, "flags": 1}
+        ]
+    }
 }

keyboards/input_club/infinity60/led/led.c

@@ -0,0 +1,83 @@
+// Copyright 2023 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "quantum.h"
+
+#ifdef LED_MATRIX_ENABLE
+const is31_led g_is31_leds[LED_MATRIX_LED_COUNT] = {
+/* Refer to IS31 manual for these locations
+ *  driver
+ *  |   LED address
+ *  |   | */
+    {0, C1_1}, // LED1
+    {0, C1_2}, // LED2
+    {0, C1_3}, // LED3
+    {0, C1_4}, // LED4
+    {0, C1_5}, // LED5
+    {0, C1_6}, // LED6
+    {0, C1_7}, // LED7
+    {0, C1_8}, // LED8
+
+    {0, C2_1}, // LED9
+    {0, C2_2}, // LED10
+    {0, C2_3}, // LED11
+    {0, C2_4}, // LED12
+    {0, C2_5}, // LED13
+    {0, C2_6}, // LED14/114
+    {0, C2_7}, // LED15
+    {0, C2_8}, // LED16
+
+    {0, C3_1}, // LED17
+    {0, C3_2}, // LED18
+    {0, C3_3}, // LED19
+    {0, C3_4}, // LED20
+    {0, C3_5}, // LED21
+    {0, C3_6}, // LED22
+    {0, C3_7}, // LED23
+    {0, C3_8}, // LED24
+
+    {0, C4_1}, // LED25
+    {0, C4_2}, // LED26
+    {0, C4_3}, // LED27
+    {0, C4_4}, // LED28
+    {0, C4_5}, // LED29
+    {0, C4_6}, // LED30
+    {0, C4_7}, // LED31
+    {0, C4_8}, // LED32
+
+    {0, C5_1}, // LED33
+    {0, C5_2}, // LED34
+    {0, C5_3}, // LED35
+    {0, C5_4}, // LED36
+    {0, C5_5}, // LED37
+    {0, C5_6}, // LED38
+    {0, C5_7}, // LED39
+    {0, C5_8}, // LED40
+
+    {0, C6_1}, // LED41
+    {0, C6_2}, // LED42
+    {0, C6_3}, // LED43
+    {0, C6_4}, // LED44
+    {0, C6_5}, // LED45
+    {0, C6_6}, // LED46
+    {0, C6_7}, // LED47
+    {0, C6_8}, // LED48
+
+    {0, C7_1}, // LED49
+    {0, C7_2}, // LED50
+    {0, C7_3}, // LED51
+    {0, C7_4}, // LED52
+    {0, C7_5}, // LED53
+    {0, C7_6}, // LED54/154
+    {0, C7_7}, // LED55
+    {0, C7_8}, // LED56/156
+
+    {0, C8_1}, // LED57/157
+    {0, C8_2}, // LED58/158
+    {0, C8_3}, // LED59/159
+    {0, C8_4}, // LED60/160
+    {0, C8_5}, // LED61/161
+    {0, C8_6}, // LED62/162
+    {0, C8_7}  // LED63/163
+};
+#endif

keyboards/input_club/infinity60/led/rules.mk

@@ -1,3 +0,0 @@
-# project specific files
-SRC += led.c \
-       led_controller.c

keyboards/input_club/infinity60/led_controller.c

@@ -1,488 +0,0 @@
-/*
-Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org>
-Copyright 2017 jpetermans <tibcmhhm@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * LED controller code
- * IS31FL3731C matrix LED driver from ISSI
- * datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf
- */
-
-#include <ch.h>
-#include <hal.h>
-#include "print.h"
-#include "led.h"
-#include "host.h"
-
-#include "led_controller.h"
-
-#include "suspend.h"
-
-#include "usb_main.h"
-
-/* Infinity60 LED MAP
-    - digits mean "row" and "col", i.e. 45 means C4-5 in the IS31 datasheet, matrix A
-
-  11 12 13 14 15 16 17 18 21 22 23 24 25  26 27*
-   28 31 32 33 34 35 36 37 38 41 42 43 44 45
-   46 47 48 51 52 53 54 55 56 57 58 61    62
-    63 64 65 66 67 68 71 72 73 74 75      76 77*
-  78  81  82       83         84  85  86  87
-
-*Unused in Alphabet Layout
-*/
-
-/*
-  each page has 0xB4 bytes
-  0 - 0x11: LED control (on/off):
-    order: CA1, CB1, CA2, CB2, .... (CA - matrix A, CB - matrix B)
-      CAn controls Cn-8 .. Cn-1 (LSbit)
-  0x12 - 0x23: blink control (like "LED control")
-  0x24 - 0xB3: PWM control: byte per LED, 0xFF max on
-    order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...)
-*/
-
-// Which LED should be used for CAPS LOCK indicator
-#if !defined(CAPS_LOCK_LED_ADDRESS)
-#define CAPS_LOCK_LED_ADDRESS 46
-#endif
-
-#if !defined(NUM_LOCK_LED_ADDRESS)
-#define NUM_LOCK_LED_ADDRESS 85
-#endif
-
-/* Which LED should breathe during sleep */
-#if !defined(BREATHE_LED_ADDRESS)
-#define BREATHE_LED_ADDRESS CAPS_LOCK_LED_ADDRESS
-#endif
-
-/* =================
- * ChibiOS I2C setup
- * ================= */
-static const I2CConfig i2ccfg = {
-  400000 // clock speed (Hz); 400kHz max for IS31
-};
-
-/* ==============
- *   variables
- * ============== */
-// internal communication buffers
-uint8_t tx[2] __attribute__((aligned(2)));
-uint8_t rx[1] __attribute__((aligned(2)));
-
-// buffer for sending the whole page at once (used also as a temp buffer)
-uint8_t full_page[0xB4+1] = {0};
-
-// LED mask (which LEDs are present, selected by bits)
-// IC60 pcb uses only CA matrix.
-// Each byte is a control pin for 8 leds ordered 8-1
-const uint8_t all_on_leds_mask[0x12] = {
-  0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF,
-  0x00, 0xFF, 0x00, 0xFF, 0x00, 0x7F, 0x00, 0x00, 0x00
-};
-
-// array to hold brightness pwm steps
-const uint8_t pwm_levels[5] = {
-    0x00, 0x16, 0x4E, 0xA1, 0xFF
-};
-
-// array to write to pwm register
-uint8_t pwm_register_array[9] = {0};
-
-
-/* ============================
- *   communication functions
- * ============================ */
-msg_t is31_select_page(uint8_t page) {
-  tx[0] = IS31_COMMANDREGISTER;
-  tx[1] = page;
-  return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, TIME_US2I(IS31_TIMEOUT));
-}
-
-msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size) {
-  is31_select_page(page);
-  return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, buffer, size, NULL, 0, TIME_US2I(IS31_TIMEOUT));
-}
-
-msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data) {
-  is31_select_page(page);
-  tx[0] = reg;
-  tx[1] = data;
-  return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, TIME_US2I(IS31_TIMEOUT));
-}
-
-msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
-  is31_select_page(page);
-
-  tx[0] = reg;
-  return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 1, result, 1, TIME_US2I(IS31_TIMEOUT));
-}
-
-/* ========================
- * initialise the IS31 chip
- * ======================== */
-void is31_init(void) {
-  // just to be sure that it's all zeroes
-  __builtin_memset(full_page,0,0xB4+1);
-  // zero function page, all registers (assuming full_page is all zeroes)
-  is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
-  // disable hardware shutdown
-  palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
-  palSetPad(GPIOB, 16);
-  chThdSleepMilliseconds(10);
-  // software shutdown
-  is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-  chThdSleepMilliseconds(10);
-  // zero function page, all registers
-  is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
-  chThdSleepMilliseconds(10);
-  // software shutdown disable (i.e. turn stuff on)
-  is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-  chThdSleepMilliseconds(10);
-  // zero all LED registers on all 8 pages
-  uint8_t i;
-  for(i=0; i<8; i++) {
-    is31_write_data(i, full_page, 0xB4 + 1);
-    chThdSleepMilliseconds(5);
-  }
-}
-
-/* ==================
- * LED control thread
- * ================== */
-#define LED_MAILBOX_NUM_MSGS 5
-static msg_t led_mailbox_queue[LED_MAILBOX_NUM_MSGS];
-mailbox_t led_mailbox;
-static THD_WORKING_AREA(waLEDthread, 256);
-static THD_FUNCTION(LEDthread, arg) {
-  (void)arg;
-  chRegSetThreadName("LEDthread");
-
-  uint8_t i;
-  uint8_t control_register_word[2] = {0};//2 bytes: register address, byte to write
-  uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
-
-  //persistent status variables
-  uint8_t pwm_step_status, page_status, capslock_status, numlock_status;
-
-  //mailbox variables
-  uint8_t temp, msg_type;
-  uint8_t msg_args[3];
-  msg_t msg;
-
-  // initialize persistent variables
-  pwm_step_status = 4; //full brightness
-  page_status = 0; //start frame 0 (all off/on)
-  led_t led_state = host_keyboard_led_state();
-  numlock_status = led_state.num_lock ? 1 : 0;
-  capslock_status = led_state.caps_lock ? 1 : 0;
-
-  while(true) {
-    // wait for a message (asynchronous)
-    // (messages are queued (up to LED_MAILBOX_NUM_MSGS) if they can't
-    //  be processed right away
-    chMBFetchTimeout(&led_mailbox, &msg, TIME_INFINITE);
-    msg_type = msg & 0xFF; //first byte is action information
-    msg_args[0] = (msg >> 8) & 0xFF;
-    msg_args[1] = (msg >> 16) & 0XFF;
-    msg_args[2] = (msg >> 24) & 0xFF;
-
-
-    switch (msg_type){
-      case SET_FULL_ROW:
-      //write full byte to pin address, msg_args[1] = pin #, msg_args[0] = 8 bits to write
-      //writes only to currently displayed page
-        write_led_byte(page_status, msg_args[1], msg_args[0]);
-        break;
-
-      case OFF_LED:
-      //on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page
-        set_led_bit(msg_args[1], control_register_word, msg_args[0], 0);
-        break;
-      case ON_LED:
-        set_led_bit(msg_args[1], control_register_word, msg_args[0], 1);
-        break;
-      case TOGGLE_LED:
-        set_led_bit(msg_args[1], control_register_word, msg_args[0], 2);
-        break;
-
-      case BLINK_OFF_LED:
-      //on/off/toggle single led, msg_args[0] = row/col of led
-        set_led_bit(msg_args[1], control_register_word, msg_args[0], 4);
-        break;
-      case BLINK_ON_LED:
-        set_led_bit(msg_args[1], control_register_word, msg_args[0], 5);
-        break;
-      case BLINK_TOGGLE_LED:
-        set_led_bit(msg_args[1], control_register_word, msg_args[0], 6);
-        break;
-
-      case TOGGLE_ALL:
-      //turn on/off all leds, msg_args = unused
-        is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-        chThdSleepMilliseconds(5);
-        is31_read_register(0, 0x00, &temp);
-        is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-
-        led_control_reg[0] = 0;
-
-        //toggle led mask based on current state (temp)
-        if (temp==0 || page_status > 0) {
-          __builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
-        } else {
-          __builtin_memset(led_control_reg+1, 0, 0x12);
-        }
-        is31_write_data(0, led_control_reg, 0x13);
-
-        if (page_status > 0) {
-          is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
-
-          page_status=0;
-
-          //maintain lock leds, reset to off and force recheck to blink of all leds toggled on
-          numlock_status = 0;
-          capslock_status = 0;
-          led_set(host_keyboard_leds());
-        }
-        break;
-
-      case TOGGLE_BACKLIGHT:
-        //msg_args[0] = on/off
-
-        //populate 9 byte rows to be written to each pin, first byte is register (pin) address
-        if (msg_args[0] == 1) {
-          __builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
-        } else {
-          __builtin_memset(pwm_register_array+1, 0, 8);
-        }
-
-        for(i=0; i<8; i++) {
-        //first byte is register address, every 0x10 9 bytes is A-matrix pwm pins
-          pwm_register_array[0] = 0x24 + (i * 0x10);
-          is31_write_data(0,pwm_register_array,9);
-        }
-        break;
-
-      case DISPLAY_PAGE:
-      //msg_args[0] = page to toggle on
-        if (page_status != msg_args[0]) {
-          is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_args[0]);
-          page_status = msg_args[0];
-
-          //maintain lock leds, reset to off and force recheck for new page
-          numlock_status = 0;
-          capslock_status = 0;
-          led_set(host_keyboard_leds());
-        }
-        break;
-
-      case RESET_PAGE:
-      //led_args[0] = page to reset
-        led_control_reg[0] = 0;
-        __builtin_memset(led_control_reg+1, 0, 0x12);
-        is31_write_data(msg_args[0], led_control_reg, 0x13);
-
-        //repeat for blink register
-        led_control_reg[0] = 0x12;
-        is31_write_data(msg_args[0], led_control_reg, 0x13);
-        break;
-
-      case TOGGLE_NUM_LOCK:
-      //msg_args[0] = 0 or 1, off/on
-        if (numlock_status != msg_args[0]) {
-          set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status);
-          numlock_status = msg_args[0];
-        }
-        break;
-      case TOGGLE_CAPS_LOCK:
-      //msg_args[0] = 0 or 1, off/on
-        if (capslock_status != msg_args[0]) {
-          set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status);
-          capslock_status = msg_args[0];
-        }
-        break;
-
-      case STEP_BRIGHTNESS:
-      //led_args[0] = step up (1) or down (0)
-        switch (msg_args[0]) {
-          case 0:
-            if (pwm_step_status == 0) {
-              pwm_step_status = 4;
-            } else {
-              pwm_step_status--;
-            }
-            break;
-
-          case 1:
-            if (pwm_step_status == 4) {
-              pwm_step_status = 0;
-            } else {
-              pwm_step_status++;
-            }
-            break;
-        }
-
-        //populate 8 byte arrays to write on each pin
-        //first byte is register address, every 0x10 9 bytes are A-matrix pwm pins
-        __builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
-
-        for(i=0; i<8; i++) {
-          pwm_register_array[0] = 0x24 + (i * 0x10);
-          is31_write_data(0,pwm_register_array,9);
-        }
-        break;
-    }
-  }
-}
-
-/* ==============================
- *    led processing functions
- * ============================== */
-
-void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uint8_t action) {
-  //returns 2 bytes: led control register address and byte to write
-  //action: 0 - off, 1 - on, 2 - toggle, 4 - blink on, 5 - blink off, 6 - toggle blink
-
-  uint8_t control_reg_addr, column_bit, column_byte, temp, blink_bit;
-
-  //check for valid led address
-  if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) {
-    return;
-  }
-
-  blink_bit = action>>2;//check for blink bit
-  action &= ~(1<<2); //strip blink bit
-
-  //led_addr tens column is pin#, ones column is bit position in 8-bit mask
-  control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte
-  control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register
-
-  is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-  chThdSleepMilliseconds(5);
-  is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte
-  is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-
-  column_bit = 1<<(led_addr % 10 - 1);
-  column_byte = temp;
-
-  switch(action) {
-    case 0:
-      column_byte &= ~column_bit;
-      break;
-    case 1:
-      column_byte |= column_bit;
-      break;
-    case 2:
-      column_byte ^= column_bit;
-      break;
-  }
-
-  //return word to be written in register
-  led_control_word[0] = control_reg_addr;
-  led_control_word[1] = column_byte;
-  is31_write_data (page, led_control_word, 0x02);
-}
-
-void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte) {
-  uint8_t led_control_word[2] = {0};//register address and on/off byte
-
-  led_control_word[0] = (row - 1 ) * 0x02;// A-matrix is every other byte
-  led_control_word[1] = led_byte;
-  is31_write_data(page, led_control_word, 0x02);
-}
-
-void write_led_page (uint8_t page, uint8_t *user_led_array, uint8_t led_count) {
-  uint8_t i;
-  uint8_t pin, col;
-  uint8_t led_control_register[0x13] = {0};
-
-  __builtin_memset(led_control_register,0,13);
-
-  for(i=0;i<led_count;i++){
-    //shift pin by 1 for led register 0x00 address
-    pin = ((user_led_array[i] / 10) % 10 - 1 ) * 2 + 1;
-    col = user_led_array[i] % 10 - 1;
-    led_control_register[pin] |= 1<<(col);
-  }
-
-  is31_write_data(page, led_control_register, 0x13);
-}
-
-void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
-  uint8_t temp;
-  uint8_t led_control_word[2] = {0};
-
-  //blink if all leds are on
-  if (page == 0) {
-    is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-    chThdSleepMilliseconds(5);
-    is31_read_register(0, 0x00, &temp);
-    is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-
-    if (temp == 0xFF) {
-      led_action |= (1<<2); //set blink bit
-    }
-  }
-
-  set_led_bit(page,led_control_word,led_addr,led_action);
-}
-
-/* =====================
- * hook into user keymap
- * ===================== */
-void led_controller_init(void) {
-  uint8_t i;
-
-  /* initialise I2C */
-  /* I2C pins */
-  palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
-  palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
-  /* start I2C */
-  i2cStart(&I2CD1, &i2ccfg);
-  // try high drive (from kiibohd)
-  I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
-  // try glitch fixing (from kiibohd)
-  I2CD1.i2c->FLT = 4;
-
-  chThdSleepMilliseconds(10);
-
-  /* initialise IS31 chip */
-  is31_init();
-
-  //set Display Option Register so all pwm intensity is controlled from page 0
-  //enable blink and set blink period to 0.27s x rate
-  is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME + IS31_REG_DISPLAYOPT_BLINK_ENABLE + 4);
-
-  /* set full pwm on page 1 */
-  pwm_register_array[0] = 0;
-  __builtin_memset(pwm_register_array+1, 0xFF, 8);
-  for(i=0; i<8; i++) {
-    pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address
-    is31_write_data(0, pwm_register_array, 9);
-    chThdSleepMilliseconds(5);
-  }
-
-  /* enable breathing when the displayed page changes */
-  // Fade-in Fade-out, time = 26ms * 2^N, N=3
-  is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3);
-  is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
-
-  /* more time consuming LED processing should be offloaded into
-   * a thread, with asynchronous messaging. */
-  chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS);
-  chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL);
-}

keyboards/input_club/infinity60/led_controller.h

@@ -1,121 +0,0 @@
-/*
-Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org>
-Copyright 2017 jpetermans <tibcmhhm@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _LED_CONTROLLER_H_
-#define _LED_CONTROLLER_H_
-
-/* =========================
- *  communication functions
- * ========================= */
-
-msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size);
-msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data);
-msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result);
-
-/* ============================
- *  init functions/definitions
- * ============================*/
-
-void led_controller_init(void);
-
-#define CAPS_LOCK_LED_ADDRESS 46 //pin matrix location
-#define NUM_LOCK_LED_ADDRESS 85
-
-/* =============================
- * IS31 chip related definitions
- * ============================= */
-
-#define IS31_ADDR_DEFAULT 0x74
-
-#define IS31_REG_CONFIG  0x00
-// bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE 0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
-// D2:D0 bits are starting frame for autoplay mode
-
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
-
-#define IS31_REG_AUTOPLAYCTRL1 0x02
-// D6:D4 number of loops (000=infty)
-// D2:D0 number of frames to be used
-
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
-
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x08
-// D2:D0 bits blink period time (*0.27s)
-
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
-
-#define IS31_REG_FRAMESTATE 0x07
-
-#define IS31_REG_BREATHCTRL1 0x08
-// D6:D4 fade out time (26ms*2^i)
-// D2:D0 fade in time (26ms*2^i)
-
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
-// D2:D0 extinguish time (3.5ms*2^i)
-
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x1
-#define IS31_REG_SHUTDOWN_ON 0x0
-
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
-
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-
-#define IS31_TIMEOUT 10000 // needs to be long enough to write a whole page
-
-/* ========================================
- * LED Thread related items
- * ========================================*/
-
-extern mailbox_t led_mailbox;
-
-void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action);
-void set_lock_leds (uint8_t led_addr, uint8_t led_action, uint8_t page);
-void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte);
-void write_led_page (uint8_t page, uint8_t *led_array, uint8_t led_count);
-
-// constants for signaling the LED controller thread
-enum led_msg_t {
-    KEY_LIGHT,
-    SET_FULL_ROW,
-    OFF_LED,
-    ON_LED,
-    TOGGLE_LED,
-    BLINK_OFF_LED,
-    BLINK_ON_LED,
-    BLINK_TOGGLE_LED,
-    TOGGLE_ALL,
-    TOGGLE_BACKLIGHT,
-    DISPLAY_PAGE,
-    RESET_PAGE,
-    TOGGLE_NUM_LOCK,
-    TOGGLE_CAPS_LOCK,
-    TOGGLE_BREATH,
-    STEP_BRIGHTNESS
-};
-
-#endif /* _LED_CONTROLLER_H_ */