Add _DEFAULT_ON lighting configuration options (#21865)

docs/feature_backlight.md

@@ -37,8 +37,9 @@ Add the following to your `config.h`:
 |`BREATHING_PERIOD`           |`6`               |The length of one backlight "breath" in seconds                                                                  |
 |`BACKLIGHT_ON_STATE`         |`1`               |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low                            |
 |`BACKLIGHT_LIMIT_VAL`        |`255`             |The maximum duty cycle of the backlight -- `255` allows for full brightness, any lower will decrease the maximum.|
+|`BACKLIGHT_DEFAULT_ON`       |`true`            |Enable backlight upon clearing the EEPROM                                                                        |
+|`BACKLIGHT_DEFAULT_BREATHING`|`false`           |Whether to enable backlight breathing upon clearing the EEPROM                                                   |
 |`BACKLIGHT_DEFAULT_LEVEL`    |`BACKLIGHT_LEVELS`|The default backlight level to use upon clearing the EEPROM                                                      |
-|`BACKLIGHT_DEFAULT_BREATHING`|*Not defined*     |Whether to enable backlight breathing upon clearing the EEPROM                                                   |
 |`BACKLIGHT_PWM_PERIOD`       |2048Hz            |Defaults to `BACKLIGHT_PWM_COUNTER_FREQUENCY / 2048`, which results in a PWM frequency of 2048Hz.                |
 
 Unless you are designing your own keyboard, you generally should not need to change the `BACKLIGHT_PIN` or `BACKLIGHT_ON_STATE`.

docs/feature_led_matrix.md

@@ -365,6 +365,7 @@ For inspiration and examples, check out the built-in effects under `quantum/led_
 #define LED_MATRIX_LED_PROCESS_LIMIT (LED_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 #define LED_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define LED_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs
+#define LED_MATRIX_DEFAULT_ON true // Sets the default enabled state, if none has been set
 #define LED_MATRIX_DEFAULT_MODE LED_MATRIX_SOLID // Sets the default mode, if none has been set
 #define LED_MATRIX_DEFAULT_VAL LED_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
 #define LED_MATRIX_DEFAULT_SPD 127 // Sets the default animation speed, if none has been set

docs/feature_rgb_matrix.md

@@ -880,6 +880,7 @@ These are defined in [`color.h`](https://github.com/qmk/qmk_firmware/blob/master
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set
 #define RGB_MATRIX_DEFAULT_HUE 0 // Sets the default hue value, if none has been set
 #define RGB_MATRIX_DEFAULT_SAT 255 // Sets the default saturation value, if none has been set
+#define RGB_MATRIX_DEFAULT_ON true // Sets the default enabled state, if none has been set
 #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
 #define RGB_MATRIX_DEFAULT_SPD 127 // Sets the default animation speed, if none has been set
 #define RGB_MATRIX_DISABLE_KEYCODES // disables control of rgb matrix by keycodes (must use code functions to control the feature)

quantum/backlight/backlight.c

@@ -22,10 +22,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 backlight_config_t backlight_config;
 
+#ifndef BACKLIGHT_DEFAULT_ON
+#    define BACKLIGHT_DEFAULT_ON true
+#endif
+
 #ifndef BACKLIGHT_DEFAULT_LEVEL
 #    define BACKLIGHT_DEFAULT_LEVEL BACKLIGHT_LEVELS
 #endif
 
+#ifndef BACKLIGHT_DEFAULT_BREATHING
+#    define BACKLIGHT_DEFAULT_BREATHING false
+#else
+#    undef BACKLIGHT_DEFAULT_BREATHING
+#    define BACKLIGHT_DEFAULT_BREATHING true
+#endif
+
 #ifdef BACKLIGHT_BREATHING
 // TODO: migrate to backlight_config_t
 static uint8_t breathing_period = BREATHING_PERIOD;
@@ -172,13 +183,9 @@ void eeconfig_update_backlight_current(void) {
 }
 
 void eeconfig_update_backlight_default(void) {
-    backlight_config.enable = 1;
-#ifdef BACKLIGHT_DEFAULT_BREATHING
-    backlight_config.breathing = 1;
-#else
-    backlight_config.breathing = 0;
-#endif
-    backlight_config.level = BACKLIGHT_DEFAULT_LEVEL;
+    backlight_config.enable    = BACKLIGHT_DEFAULT_ON;
+    backlight_config.breathing = BACKLIGHT_DEFAULT_BREATHING;
+    backlight_config.level     = BACKLIGHT_DEFAULT_LEVEL;
     eeconfig_update_backlight(backlight_config.raw);
 }
 

quantum/led_matrix/led_matrix.c

@@ -97,7 +97,7 @@ void eeconfig_update_led_matrix(void) {
 
 void eeconfig_update_led_matrix_default(void) {
     dprintf("eeconfig_update_led_matrix_default\n");
-    led_matrix_eeconfig.enable = 1;
+    led_matrix_eeconfig.enable = LED_MATRIX_DEFAULT_ON;
     led_matrix_eeconfig.mode   = LED_MATRIX_DEFAULT_MODE;
     led_matrix_eeconfig.val    = LED_MATRIX_DEFAULT_VAL;
     led_matrix_eeconfig.speed  = LED_MATRIX_DEFAULT_SPD;

quantum/led_matrix/led_matrix.h

@@ -59,6 +59,10 @@
 #    define LED_MATRIX_SPD_STEP 16
 #endif
 
+#ifndef LED_MATRIX_DEFAULT_ON
+#    define LED_MATRIX_DEFAULT_ON true
+#endif
+
 #ifndef LED_MATRIX_DEFAULT_MODE
 #    define LED_MATRIX_DEFAULT_MODE LED_MATRIX_SOLID
 #endif

quantum/rgb_matrix/rgb_matrix.c

@@ -99,7 +99,7 @@ void eeconfig_update_rgb_matrix(void) {
 
 void eeconfig_update_rgb_matrix_default(void) {
     dprintf("eeconfig_update_rgb_matrix_default\n");
-    rgb_matrix_config.enable = 1;
+    rgb_matrix_config.enable = RGB_MATRIX_DEFAULT_ON;
     rgb_matrix_config.mode   = RGB_MATRIX_DEFAULT_MODE;
     rgb_matrix_config.hsv    = (HSV){RGB_MATRIX_DEFAULT_HUE, RGB_MATRIX_DEFAULT_SAT, RGB_MATRIX_DEFAULT_VAL};
     rgb_matrix_config.speed  = RGB_MATRIX_DEFAULT_SPD;

quantum/rgb_matrix/rgb_matrix.h

@@ -70,6 +70,10 @@
 #    define RGB_MATRIX_SPD_STEP 16
 #endif
 
+#ifndef RGB_MATRIX_DEFAULT_ON
+#    define RGB_MATRIX_DEFAULT_ON true
+#endif
+
 #ifndef RGB_MATRIX_DEFAULT_MODE
 #    ifdef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
 #        define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT