Merge remote-tracking branch 'origin/develop' into xap

keyboards/3w6/rev1/matrix.c

@@ -165,8 +165,8 @@ static void init_cols(void) {
     pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_L;
     for (int pin_index = 0; pin_index < MATRIX_COLS_PER_SIDE; pin_index++) {
         pin_t pin = matrix_col_pins_mcu[pin_index];
-        setPinInput(pin);
-        writePinHigh(pin);
+        gpio_set_pin_input(pin);
+        gpio_write_pin_high(pin);
     }
 }
 
@@ -177,7 +177,7 @@ static matrix_row_t read_cols(uint8_t row) {
         // For each col...
         for (uint8_t col_index = 0; col_index < MATRIX_COLS_PER_SIDE; col_index++) {
             // Select the col pin to read (active low)
-            uint8_t pin_state = readPin(matrix_col_pins_mcu[col_index]);
+            uint8_t pin_state = gpio_read_pin(matrix_col_pins_mcu[col_index]);
 
             // Populate the matrix row with the state of the col pin
             current_row_value |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index);
@@ -223,8 +223,8 @@ static void unselect_rows(void) {
     pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_L;
     for (int pin_index = 0; pin_index < MATRIX_ROWS_PER_SIDE; pin_index++) {
         pin_t pin = matrix_row_pins_mcu[pin_index];
-        setPinInput(pin);
-        writePinLow(pin);
+        gpio_set_pin_input(pin);
+        gpio_write_pin_low(pin);
     }
 }
 
@@ -236,8 +236,8 @@ static void select_row(uint8_t row) {
         // select on atmega32u4
         pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_L;
         pin_t pin                                       = matrix_row_pins_mcu[row];
-        setPinOutput(pin);
-        writePinLow(pin);
+        gpio_set_pin_output(pin);
+        gpio_write_pin_low(pin);
     } else {
         // select on tca9555
         if (tca9555_status) {  // if there was an error

keyboards/3w6/rev2/matrix.c

@@ -165,8 +165,8 @@ static void init_cols(void) {
     pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_L;
     for (int pin_index = 0; pin_index < MATRIX_COLS_PER_SIDE; pin_index++) {
         pin_t pin = matrix_col_pins_mcu[pin_index];
-        setPinInput(pin);
-        writePinHigh(pin);
+        gpio_set_pin_input(pin);
+        gpio_write_pin_high(pin);
     }
 }
 
@@ -177,7 +177,7 @@ static matrix_row_t read_cols(uint8_t row) {
         // For each col...
         for (uint8_t col_index = 0; col_index < MATRIX_COLS_PER_SIDE; col_index++) {
             // Select the col pin to read (active low)
-            uint8_t pin_state = readPin(matrix_col_pins_mcu[col_index]);
+            uint8_t pin_state = gpio_read_pin(matrix_col_pins_mcu[col_index]);
 
             // Populate the matrix row with the state of the col pin
             current_row_value |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index);
@@ -221,8 +221,8 @@ static void unselect_rows(void) {
     pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_L;
     for (int pin_index = 0; pin_index < MATRIX_ROWS_PER_SIDE; pin_index++) {
         pin_t pin = matrix_row_pins_mcu[pin_index];
-        setPinInput(pin);
-        writePinLow(pin);
+        gpio_set_pin_input(pin);
+        gpio_write_pin_low(pin);
     }
 }
 
@@ -233,8 +233,8 @@ static void select_row(uint8_t row) {
         // select on atmega32u4
         pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_L;
         pin_t pin                                       = matrix_row_pins_mcu[row];
-        setPinOutput(pin);
-        writePinLow(pin);
+        gpio_set_pin_output(pin);
+        gpio_write_pin_low(pin);
     } else {
         // select on tca9555
         if (tca9555_status) {  // if there was an error

keyboards/40percentclub/4pack/4pack.c

@@ -23,8 +23,8 @@ void matrix_init_kb(void) {
   // put your keyboard start-up code here
   // runs once when the firmware starts up
 
-  setPinOutput(F4); // cathodes
-  setPinOutput(F5); // cathodes
+  gpio_set_pin_output(F4); // cathodes
+  gpio_set_pin_output(F5); // cathodes
 
   // Do the rest
   matrix_init_user();

keyboards/40percentclub/sixpack/sixpack.c

@@ -16,9 +16,9 @@
 #include "quantum.h"
 
 void matrix_init_kb(void) {
-    setPinOutput(B6);  // Backlight cathodes Col.3
-    setPinOutput(F6);  // Backlight cathodes Col.2
-    setPinOutput(F7);  // Backlight cathodes Col.1
+    gpio_set_pin_output(B6);  // Backlight cathodes Col.3
+    gpio_set_pin_output(F6);  // Backlight cathodes Col.2
+    gpio_set_pin_output(F7);  // Backlight cathodes Col.1
 
     matrix_init_user();
 }

keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c

@@ -17,9 +17,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "rev_a.h"
 
 void board_init(void) {
-    setPinInputHigh(CAPS_PIN);
-    setPinInputHigh(SCROLL_PIN);
-    setPinInputHigh(NUM_PIN);
+    gpio_set_pin_input_high(CAPS_PIN);
+    gpio_set_pin_input_high(SCROLL_PIN);
+    gpio_set_pin_input_high(NUM_PIN);
 }
 
 /* Set indicator leds to indicate lock states */
@@ -27,23 +27,23 @@ bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if(res && LOCK_LIGHTS) {
         if(led_state.caps_lock){
-            setPinOutput(CAPS_PIN);
-            writePin(CAPS_PIN, 0);
+            gpio_set_pin_output(CAPS_PIN);
+            gpio_write_pin(CAPS_PIN, 0);
         }
         else
-            setPinInputHigh(CAPS_PIN);
+            gpio_set_pin_input_high(CAPS_PIN);
         if(led_state.scroll_lock){
-            setPinOutput(SCROLL_PIN);
-            writePin(SCROLL_PIN, 0);
+            gpio_set_pin_output(SCROLL_PIN);
+            gpio_write_pin(SCROLL_PIN, 0);
         }
         else
-            setPinInputHigh(SCROLL_PIN);
+            gpio_set_pin_input_high(SCROLL_PIN);
         if(led_state.num_lock){
-            setPinOutput(NUM_PIN);
-            writePin(NUM_PIN, 0);
+            gpio_set_pin_output(NUM_PIN);
+            gpio_write_pin(NUM_PIN, 0);
         }
         else
-            setPinInputHigh(NUM_PIN);
+            gpio_set_pin_input_high(NUM_PIN);
     }
     return res;
 }
@@ -59,50 +59,50 @@ layer_state_t layer_state_set_kb(layer_state_t state) {
 void setLayerLed(layer_state_t state){
     switch(get_highest_layer(state)){
         case 0 :
-            setPinOutput(LAYER_1);
-            writePin(LAYER_1, 0);
-            setPinInputHigh(LAYER_2);
-            setPinInputHigh(LAYER_3);
-            setPinInputHigh(LAYER_4);
-            setPinInputHigh(LAYER_5);
+            gpio_set_pin_output(LAYER_1);
+            gpio_write_pin(LAYER_1, 0);
+            gpio_set_pin_input_high(LAYER_2);
+            gpio_set_pin_input_high(LAYER_3);
+            gpio_set_pin_input_high(LAYER_4);
+            gpio_set_pin_input_high(LAYER_5);
             break;
         case 1 :
-            setPinOutput(LAYER_2);
-            writePin(LAYER_2, 0);
-            setPinInputHigh(LAYER_1);
-            setPinInputHigh(LAYER_3);
-            setPinInputHigh(LAYER_4);
-            setPinInputHigh(LAYER_5);
+            gpio_set_pin_output(LAYER_2);
+            gpio_write_pin(LAYER_2, 0);
+            gpio_set_pin_input_high(LAYER_1);
+            gpio_set_pin_input_high(LAYER_3);
+            gpio_set_pin_input_high(LAYER_4);
+            gpio_set_pin_input_high(LAYER_5);
             break;
         case 2 :
-            setPinOutput(LAYER_3);
-            writePin(LAYER_3, 0);
-            setPinInputHigh(LAYER_1);
-            setPinInputHigh(LAYER_2);
-            setPinInputHigh(LAYER_4);
-            setPinInputHigh(LAYER_5);
+            gpio_set_pin_output(LAYER_3);
+            gpio_write_pin(LAYER_3, 0);
+            gpio_set_pin_input_high(LAYER_1);
+            gpio_set_pin_input_high(LAYER_2);
+            gpio_set_pin_input_high(LAYER_4);
+            gpio_set_pin_input_high(LAYER_5);
             break;
         case 3 :
-            writePin(LAYER_4, 0);
-            setPinInputHigh(LAYER_5);
-            setPinInputHigh(LAYER_1);
-            setPinInputHigh(LAYER_2);
-            setPinInputHigh(LAYER_3);
-            setPinOutput(LAYER_4);
+            gpio_write_pin(LAYER_4, 0);
+            gpio_set_pin_input_high(LAYER_5);
+            gpio_set_pin_input_high(LAYER_1);
+            gpio_set_pin_input_high(LAYER_2);
+            gpio_set_pin_input_high(LAYER_3);
+            gpio_set_pin_output(LAYER_4);
             break;
         case 4 :
-            setPinOutput(LAYER_5);
-            writePin(LAYER_5, 0);
-            setPinInputHigh(LAYER_1);
-            setPinInputHigh(LAYER_2);
-            setPinInputHigh(LAYER_3);
-            setPinInputHigh(LAYER_4);
+            gpio_set_pin_output(LAYER_5);
+            gpio_write_pin(LAYER_5, 0);
+            gpio_set_pin_input_high(LAYER_1);
+            gpio_set_pin_input_high(LAYER_2);
+            gpio_set_pin_input_high(LAYER_3);
+            gpio_set_pin_input_high(LAYER_4);
             break;
         default :
-            setPinInputHigh(LAYER_1);
-            setPinInputHigh(LAYER_2);
-            setPinInputHigh(LAYER_3);
-            setPinInputHigh(LAYER_4);
-            setPinInputHigh(LAYER_5);
+            gpio_set_pin_input_high(LAYER_1);
+            gpio_set_pin_input_high(LAYER_2);
+            gpio_set_pin_input_high(LAYER_3);
+            gpio_set_pin_input_high(LAYER_4);
+            gpio_set_pin_input_high(LAYER_5);
     }
 }

keyboards/4pplet/eagle_viper_rep/rev_b/rev_b.c

@@ -17,11 +17,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "rev_b.h"
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(LAYER_1);
-    setPinOutput(LAYER_2);
-    setPinOutput(LAYER_3);
-    setPinOutput(LAYER_4);
-    setPinOutput(LAYER_5);
+    gpio_set_pin_output(LAYER_1);
+    gpio_set_pin_output(LAYER_2);
+    gpio_set_pin_output(LAYER_3);
+    gpio_set_pin_output(LAYER_4);
+    gpio_set_pin_output(LAYER_5);
     keyboard_pre_init_user();
 }
 
@@ -32,26 +32,26 @@ layer_state_t layer_state_set_kb(layer_state_t state) {
 }
 /* Set indicator leds to indicate which layer is active */
 void setLayerLed(layer_state_t state){
-    writePinLow(LAYER_1);
-    writePinLow(LAYER_2);
-    writePinLow(LAYER_3);
-    writePinLow(LAYER_4);
-    writePinLow(LAYER_5);
+    gpio_write_pin_low(LAYER_1);
+    gpio_write_pin_low(LAYER_2);
+    gpio_write_pin_low(LAYER_3);
+    gpio_write_pin_low(LAYER_4);
+    gpio_write_pin_low(LAYER_5);
     switch (get_highest_layer(state)) {
         case 0:
-            writePinHigh(LAYER_1);
+            gpio_write_pin_high(LAYER_1);
             break;
         case 1:
-            writePinHigh(LAYER_2);
+            gpio_write_pin_high(LAYER_2);
             break;
         case 2:
-            writePinHigh(LAYER_3);
+            gpio_write_pin_high(LAYER_3);
             break;
         case 3:
-            writePinHigh(LAYER_4);
+            gpio_write_pin_high(LAYER_4);
             break;
         case 4:
-            writePinHigh(LAYER_5);
+            gpio_write_pin_high(LAYER_5);
             break;
     }
 }

keyboards/acheron/apollo/87h/delta/delta.c

@@ -18,8 +18,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 void board_init(void) {
-    setPinInput(B9);
-    setPinInput(B10);
+    gpio_set_pin_input(B9);
+    gpio_set_pin_input(B10);
 }
 
 led_config_t g_led_config = { {

keyboards/acheron/apollo/87htsc/87htsc.c

@@ -18,8 +18,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 void board_init(void) {
-    setPinInput(B9);
-    setPinInput(B10);
+    gpio_set_pin_input(B9);
+    gpio_set_pin_input(B10);
 }
 
 led_config_t g_led_config = { {

keyboards/acheron/athena/alpha/alpha.c

@@ -17,8 +17,8 @@
 #include "quantum.h"
 
 void board_init(void) {
-    setPinInput(B6);
-    setPinInput(B7);
+    gpio_set_pin_input(B6);
+    gpio_set_pin_input(B7);
 }
 
 void keyboard_post_init_kb(void){
@@ -34,10 +34,10 @@ bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     #ifdef CAPSLOCK_INDICATOR
     if(res) {
-        writePin(LED_CAPS_LOCK_PIN, !led_state.caps_lock);
+        gpio_write_pin(LED_CAPS_LOCK_PIN, !led_state.caps_lock);
     }
     #else
-    writePin(LED_CAPS_LOCK_PIN, 0);
+    gpio_write_pin(LED_CAPS_LOCK_PIN, 0);
     #endif
     return res;
 }

keyboards/acheron/athena/beta/beta.c

@@ -17,18 +17,18 @@
 #include "quantum.h"
 
 void board_init(void) {
-    setPinInput(B6);
-    setPinInput(B7);
+    gpio_set_pin_input(B6);
+    gpio_set_pin_input(B7);
 }
 
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     #ifdef CAPSLOCK_INDICATOR
     if(res) {
-        writePin(LED_CAPS_LOCK_PIN, led_state.caps_lock);
+        gpio_write_pin(LED_CAPS_LOCK_PIN, led_state.caps_lock);
     }
     #else
-    writePin(LED_CAPS_LOCK_PIN, 0);
+    gpio_write_pin(LED_CAPS_LOCK_PIN, 0);
     #endif
     return res;
 }

keyboards/acheron/austin/austin.c

@@ -1,18 +1,18 @@
 #include "quantum.h"
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(A0);
-    setPinOutput(A1);
-    setPinOutput(A2);
+    gpio_set_pin_output(A0);
+    gpio_set_pin_output(A1);
+    gpio_set_pin_output(A2);
 
     keyboard_pre_init_user();
 }
 
 bool led_update_kb(led_t led_state) {
     if (led_update_user(led_state)) {
-        writePin(A2, led_state.num_lock);
-        writePin(A0, led_state.caps_lock);
-        writePin(A1, led_state.scroll_lock);
+        gpio_write_pin(A2, led_state.num_lock);
+        gpio_write_pin(A0, led_state.caps_lock);
+        gpio_write_pin(A1, led_state.scroll_lock);
     }
     return true;
 }

keyboards/acheron/elongate/delta/delta.c

@@ -30,18 +30,18 @@ void led_init_ports(void) {
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if(res) {
-        writePin(LED1_PIN, !led_state.num_lock);
-        writePin(LED2_PIN, !led_state.caps_lock);
-        writePin(LED3_PIN, !led_state.scroll_lock);
+        gpio_write_pin(LED1_PIN, !led_state.num_lock);
+        gpio_write_pin(LED2_PIN, !led_state.caps_lock);
+        gpio_write_pin(LED3_PIN, !led_state.scroll_lock);
     }
     return res;
 }
 
 // Turns off all bottom LEDs
 void turn_off_bottom_leds(void){
-	writePin(LED4_PIN, 1);
-	writePin(LED5_PIN, 1);
-	writePin(LED6_PIN, 1);
+	gpio_write_pin(LED4_PIN, 1);
+	gpio_write_pin(LED5_PIN, 1);
+	gpio_write_pin(LED6_PIN, 1);
 }
 
 /*
@@ -53,19 +53,19 @@ layer_state_t layer_state_set_kb(layer_state_t state) {
     switch (get_highest_layer(state)) {
 // The base layer, or layer zero, will be handled by the default case.
     case 1:
-	writePin(LED4_PIN, 1);
-	writePin(LED5_PIN, 0);
-	writePin(LED6_PIN, 1);
+	gpio_write_pin(LED4_PIN, 1);
+	gpio_write_pin(LED5_PIN, 0);
+	gpio_write_pin(LED6_PIN, 1);
         break;
     case 2:
-	writePin(LED4_PIN, 1);
-	writePin(LED5_PIN, 1);
-	writePin(LED6_PIN, 0);
+	gpio_write_pin(LED4_PIN, 1);
+	gpio_write_pin(LED5_PIN, 1);
+	gpio_write_pin(LED6_PIN, 0);
         break;
     default:
-	writePin(LED4_PIN, 0);
-	writePin(LED5_PIN, 1);
-	writePin(LED6_PIN, 1);
+	gpio_write_pin(LED4_PIN, 0);
+	gpio_write_pin(LED5_PIN, 1);
+	gpio_write_pin(LED6_PIN, 1);
         break;
     }
   return state;
@@ -73,5 +73,5 @@ layer_state_t layer_state_set_kb(layer_state_t state) {
 
 // Since the keyboard starts at layer 0, the init function starts LED4 as lit up.
 void keyboard_post_init_kb(void){
-	writePin(LED4_PIN, 0);
+	gpio_write_pin(LED4_PIN, 0);
 }

keyboards/acheron/shark/beta/beta.c

@@ -17,6 +17,6 @@
 #include "quantum.h"
 
 void board_init(void) {
-	setPinInput(B6);
-	setPinInput(B7);
+	gpio_set_pin_input(B6);
+	gpio_set_pin_input(B7);
 }

keyboards/aeboards/ext65/rev1/rev1.c

@@ -19,18 +19,18 @@
 void keyboard_pre_init_user(void) {
   // Call the keyboard pre init code.
   // Set our LED pins as output
-  setPinOutput(D5);
-  setPinOutput(D3);
-  setPinOutput(D2);
-  setPinOutput(D1);
+  gpio_set_pin_output(D5);
+  gpio_set_pin_output(D3);
+  gpio_set_pin_output(D2);
+  gpio_set_pin_output(D1);
 }
 
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if(res) {
-        writePin(D5, led_state.num_lock);
-        writePin(D3, led_state.caps_lock);
-        writePin(D2, led_state.scroll_lock);
+        gpio_write_pin(D5, led_state.num_lock);
+        gpio_write_pin(D3, led_state.caps_lock);
+        gpio_write_pin(D2, led_state.scroll_lock);
     }
     return res;
 }
@@ -38,10 +38,10 @@ bool led_update_kb(led_t led_state) {
 layer_state_t layer_state_set_kb(layer_state_t state) {
     switch (get_highest_layer(state)) {
       case 1:
-        writePinHigh(D1);
+        gpio_write_pin_high(D1);
         break;
       default: //  for any other layers, or the default layer
-        writePinLow(D1);
+        gpio_write_pin_low(D1);
         break;
       }
     return layer_state_set_user(state);

keyboards/aeboards/ext65/rev2/rev2.c

@@ -71,10 +71,10 @@ bool oled_task_kb(void) {
 void keyboard_pre_init_kb(void) {
     // Call the keyboard pre init code.
     // Set our LED pins as output
-    setPinOutput(B4);
-    setPinOutput(B3);
-    setPinOutput(A15);
-    setPinOutput(A14);
+    gpio_set_pin_output(B4);
+    gpio_set_pin_output(B3);
+    gpio_set_pin_output(A15);
+    gpio_set_pin_output(A14);
 
     keyboard_pre_init_user();
 }
@@ -82,9 +82,9 @@ void keyboard_pre_init_kb(void) {
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if (res) {
-        writePin(B4, led_state.num_lock);
-        writePin(B3, led_state.caps_lock);
-        writePin(A15, led_state.scroll_lock);
+        gpio_write_pin(B4, led_state.num_lock);
+        gpio_write_pin(B3, led_state.caps_lock);
+        gpio_write_pin(A15, led_state.scroll_lock);
     }
     return res;
 }
@@ -92,10 +92,10 @@ bool led_update_kb(led_t led_state) {
 layer_state_t layer_state_set_kb(layer_state_t state) {
     switch (get_highest_layer(state)) {
         case 1:
-            writePinHigh(A14);
+            gpio_write_pin_high(A14);
             break;
         default: //  for any other layers, or the default layer
-            writePinLow(A14);
+            gpio_write_pin_low(A14);
             break;
     }
     return layer_state_set_user(state);

keyboards/aeboards/ext65/rev3/rev3.c

@@ -22,16 +22,16 @@ void matrix_io_delay(void) { __asm__ volatile("nop\nnop\nnop\n"); }
 void keyboard_pre_init_user(void) {
   // Call the keyboard pre init code.
   // Set our LED pins as output
-  setPinOutput(LED_LAYERS_PIN);
+  gpio_set_pin_output(LED_LAYERS_PIN);
 }
 
 layer_state_t layer_state_set_kb(layer_state_t state) {
     switch (get_highest_layer(state)) {
       case 1:
-        writePinHigh(LED_LAYERS_PIN);
+        gpio_write_pin_high(LED_LAYERS_PIN);
         break;
       default: //  for any other layers, or the default layer
-        writePinLow(LED_LAYERS_PIN);
+        gpio_write_pin_low(LED_LAYERS_PIN);
         break;
       }
     return layer_state_set_user(state);

keyboards/ai03/orbit/orbit.c

@@ -19,13 +19,13 @@
 void led_init_ports(void) {
     // Initialize indicator LEDs to output
     if (isLeftHand) {
-        setPinOutput(C6);
-        setPinOutput(B6);
-        setPinOutput(B5);
+        gpio_set_pin_output(C6);
+        gpio_set_pin_output(B6);
+        gpio_set_pin_output(B5);
     } else {
-        setPinOutput(F6);
-        setPinOutput(F7);
-        setPinOutput(C7);
+        gpio_set_pin_output(F6);
+        gpio_set_pin_output(F7);
+        gpio_set_pin_output(C7);
     }
 
     set_layer_indicators(0);
@@ -40,15 +40,15 @@ void led_toggle(uint8_t id, bool on) {
         switch (id) {
             case 0:
                 // Left hand C6
-                writePin(C6, on);
+                gpio_write_pin(C6, on);
                 break;
             case 1:
                 // Left hand B6
-                writePin(B6, on);
+                gpio_write_pin(B6, on);
                 break;
             case 2:
                 // Left hand B5
-                writePin(B5, on);
+                gpio_write_pin(B5, on);
                 break;
             default:
                 break;
@@ -57,15 +57,15 @@ void led_toggle(uint8_t id, bool on) {
         switch (id) {
             case 3:
                 // Right hand F6
-                writePin(F6, on);
+                gpio_write_pin(F6, on);
                 break;
             case 4:
                 // Right hand F7
-                writePin(F7, on);
+                gpio_write_pin(F7, on);
                 break;
             case 5:
                 // Right hand C7
-                writePin(C7, on);
+                gpio_write_pin(C7, on);
                 break;
             default:
                 break;

keyboards/ai03/vega/vega.c

@@ -19,8 +19,8 @@
 void matrix_init_kb(void) {
 	// Initialize indicator LEDs to output
     
-    setPinOutput(B7); // Caps
-	setPinOutput(A5); // Slck
+    gpio_set_pin_output(B7); // Caps
+	gpio_set_pin_output(A5); // Slck
 
 	matrix_init_user();
 }
@@ -30,8 +30,8 @@ bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
 
     if(res) {
-        writePin(B7, !led_state.caps_lock);
-        writePin(A5, !led_state.scroll_lock);
+        gpio_write_pin(B7, !led_state.caps_lock);
+        gpio_write_pin(A5, !led_state.scroll_lock);
     }
     return res;
 }

keyboards/akko/5087/5087.c

@@ -137,17 +137,17 @@ enum __layers {
 // clang-format on
 
 void matrix_init_kb(void) {
-    setPinOutput(LED_MAC_OS_PIN); // LDE2 MAC\WIN
-    writePinLow(LED_MAC_OS_PIN);
-    setPinOutput(LED_WIN_LOCK_PIN); // LED3 Win Lock
-    writePinLow(LED_WIN_LOCK_PIN);
+    gpio_set_pin_output(LED_MAC_OS_PIN); // LDE2 MAC\WIN
+    gpio_write_pin_low(LED_MAC_OS_PIN);
+    gpio_set_pin_output(LED_WIN_LOCK_PIN); // LED3 Win Lock
+    gpio_write_pin_low(LED_WIN_LOCK_PIN);
 
     matrix_init_user();
 }
 
 void housekeeping_task_kb(void){
-    writePin(LED_MAC_OS_PIN, (get_highest_layer(default_layer_state) == 3));
-    writePin(LED_WIN_LOCK_PIN, keymap_config.no_gui);
+    gpio_write_pin(LED_MAC_OS_PIN, (get_highest_layer(default_layer_state) == 3));
+    gpio_write_pin(LED_WIN_LOCK_PIN, keymap_config.no_gui);
 }
 
 bool process_record_kb(uint16_t keycode, keyrecord_t* record) {

keyboards/akko/5108/5108.c

@@ -148,15 +148,15 @@ const snled27351_led_t PROGMEM g_snled27351_leds[SNLED27351_LED_COUNT] = {
 #endif
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(LED_WIN_LOCK_PIN); // LED3 Win Lock
-    writePinLow(LED_WIN_LOCK_PIN);
+    gpio_set_pin_output(LED_WIN_LOCK_PIN); // LED3 Win Lock
+    gpio_write_pin_low(LED_WIN_LOCK_PIN);
     keyboard_pre_init_user();
 }
 
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if (res) {
-        writePin(LED_WIN_LOCK_PIN, keymap_config.no_gui);
+        gpio_write_pin(LED_WIN_LOCK_PIN, keymap_config.no_gui);
     }
     return res;
 }

keyboards/al1/matrix.c

@@ -48,7 +48,7 @@ static void select_col(uint8_t col) {
 
 static void init_pins(void) {
     for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
-        setPinInputHigh(row_pins[x]);
+        gpio_set_pin_input_high(row_pins[x]);
     }
 }
 
@@ -65,7 +65,7 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
         matrix_row_t last_row_value = current_matrix[row_index];
 
         // Check row pin state
-        if (readPin(row_pins[row_index]) == 0) {
+        if (gpio_read_pin(row_pins[row_index]) == 0) {
             // Pin LO, set col bit
             current_matrix[row_index] |= (MATRIX_ROW_SHIFTER << current_col);
         } else {

keyboards/anavi/knob1/knob1.c

@@ -6,8 +6,8 @@
 
 void keyboard_post_init_kb(void) {
     // Enable RGB LED
-    setPinOutput(GP11);
-    writePinHigh(GP11);
+    gpio_set_pin_output(GP11);
+    gpio_write_pin_high(GP11);
     rgblight_enable();
 
     // Offload to the user func

keyboards/anavi/knobs3/knobs3.c

@@ -6,8 +6,8 @@
 
 void keyboard_post_init_kb(void) {
     // Enable RGB LED
-    setPinOutput(GP11);
-    writePinHigh(GP11);
+    gpio_set_pin_output(GP11);
+    gpio_write_pin_high(GP11);
     rgblight_enable();
 
     // Offload to the user func

keyboards/argyle/matrix.c

@@ -26,27 +26,27 @@ static const pin_t col_pins[MATRIX_COLS]   = MATRIX_COL_PINS;
 
 static inline void setPinOutput_writeLow(pin_t pin) {
     ATOMIC_BLOCK_FORCEON {
-        setPinOutput(pin);
-        writePinLow(pin);
+        gpio_set_pin_output(pin);
+        gpio_write_pin_low(pin);
     }
 }
 
 static inline void setPinOutput_writeHigh(pin_t pin) {
     ATOMIC_BLOCK_FORCEON {
-        setPinOutput(pin);
-        writePinHigh(pin);
+        gpio_set_pin_output(pin);
+        gpio_write_pin_high(pin);
     }
 }
 
 static inline void setPinInputHigh_atomic(pin_t pin) {
     ATOMIC_BLOCK_FORCEON {
-        setPinInputHigh(pin);
+        gpio_set_pin_input_high(pin);
     }
 }
 
 static inline uint8_t readMatrixPin(pin_t pin) {
     if (pin != NO_PIN) {
-        return (readPin(pin) == 0) ? 0 : 1;
+        return (gpio_read_pin(pin) == 0) ? 0 : 1;
     } else {
         return 1;
     }

keyboards/artifact/lvl/rev_hs01/rev_hs01.c

@@ -17,5 +17,5 @@
 
 void led_init_ports(void) {
     // Set our LED pins as open drain outputs
-    setPinOutputOpenDrain(LED_CAPS_LOCK_PIN);
+    gpio_set_pin_output_open_drain(LED_CAPS_LOCK_PIN);
 }

keyboards/atlantis/ps17/ps17.c

@@ -5,26 +5,26 @@
 
 layer_state_t layer_state_set_kb(layer_state_t state) {
     /* Display current layer using indicator LEDs */
-    writePin(LED_INDICATOR_0_PIN, !IS_LAYER_ON_STATE(state, 1));
-    writePin(LED_INDICATOR_1_PIN, !IS_LAYER_ON_STATE(state, 2));
-    writePin(LED_INDICATOR_2_PIN, !IS_LAYER_ON_STATE(state, 3));
+    gpio_write_pin(LED_INDICATOR_0_PIN, !IS_LAYER_ON_STATE(state, 1));
+    gpio_write_pin(LED_INDICATOR_1_PIN, !IS_LAYER_ON_STATE(state, 2));
+    gpio_write_pin(LED_INDICATOR_2_PIN, !IS_LAYER_ON_STATE(state, 3));
     return layer_state_set_user(state);
 }
 
 void keyboard_pre_init_kb(void) {
     /* Set indicator LEDs as outputs */
-    setPinOutput(LED_INDICATOR_0_PIN);
-    setPinOutput(LED_INDICATOR_1_PIN);
-    setPinOutput(LED_INDICATOR_2_PIN);
+    gpio_set_pin_output(LED_INDICATOR_0_PIN);
+    gpio_set_pin_output(LED_INDICATOR_1_PIN);
+    gpio_set_pin_output(LED_INDICATOR_2_PIN);
     keyboard_pre_init_user();
 }
 
 #ifdef RGB_MATRIX_ENABLE
 void suspend_power_down_kb(void) {
     /* Disable indicator LEDs when going to sleep */
-    writePin(LED_INDICATOR_0_PIN, 1);
-    writePin(LED_INDICATOR_1_PIN, 1);
-    writePin(LED_INDICATOR_2_PIN, 1);
+    gpio_write_pin(LED_INDICATOR_0_PIN, 1);
+    gpio_write_pin(LED_INDICATOR_1_PIN, 1);
+    gpio_write_pin(LED_INDICATOR_2_PIN, 1);
     suspend_power_down_user();
 }
 

keyboards/atomic/atomic.c

@@ -21,8 +21,8 @@ void matrix_init_kb(void) {
     // runs once when the firmware starts up
 
     // Turn status LED on
-    setPinOutput(E6);
-    writePinHigh(E6);
+    gpio_set_pin_output(E6);
+    gpio_write_pin_high(E6);
 
     matrix_init_user();
 }

keyboards/bajjak/bajjak.h

@@ -53,17 +53,17 @@ uint8_t bajjak_left_leds_update(void);
 #endif
 
 
-inline void bajjak_board_led_on(void)      { setPinOutput(D6); writePinHigh(D6); }
-inline void bajjak_right_led_1_on(void)    { setPinOutput(B5); writePinHigh(B5); }
-inline void bajjak_right_led_2_on(void)    { setPinOutput(B6); writePinHigh(B6); }
-inline void bajjak_right_led_3_on(void)    { setPinOutput(B7); writePinHigh(B7); }
-inline void bajjak_right_led_on(uint8_t led) { setPinOutput(led+4); writePinHigh(led+4); }
-
-inline void bajjak_board_led_off(void)     { setPinInput(D6); writePinLow(D6); }
-inline void bajjak_right_led_1_off(void)   { setPinInput(B5); writePinLow(B5); }
-inline void bajjak_right_led_2_off(void)   { setPinInput(B6); writePinLow(B6); }
-inline void bajjak_right_led_3_off(void)   { setPinInput(B7); writePinLow(B7); }
-inline void bajjak_right_led_off(uint8_t led) { setPinInput(led+4); writePinLow(led+4); }
+inline void bajjak_board_led_on(void)      { gpio_set_pin_output(D6); gpio_write_pin_high(D6); }
+inline void bajjak_right_led_1_on(void)    { gpio_set_pin_output(B5); gpio_write_pin_high(B5); }
+inline void bajjak_right_led_2_on(void)    { gpio_set_pin_output(B6); gpio_write_pin_high(B6); }
+inline void bajjak_right_led_3_on(void)    { gpio_set_pin_output(B7); gpio_write_pin_high(B7); }
+inline void bajjak_right_led_on(uint8_t led) { gpio_set_pin_output(led+4); gpio_write_pin_high(led+4); }
+
+inline void bajjak_board_led_off(void)     { gpio_set_pin_input(D6); gpio_write_pin_low(D6); }
+inline void bajjak_right_led_1_off(void)   { gpio_set_pin_input(B5); gpio_write_pin_low(B5); }
+inline void bajjak_right_led_2_off(void)   { gpio_set_pin_input(B6); gpio_write_pin_low(B6); }
+inline void bajjak_right_led_3_off(void)   { gpio_set_pin_input(B7); gpio_write_pin_low(B7); }
+inline void bajjak_right_led_off(uint8_t led) { gpio_set_pin_input(led+4); gpio_write_pin_low(led+4); }
 
 #ifdef LEFT_LEDS
 bool bajjak_left_led_1;

keyboards/bajjak/matrix.c

@@ -128,13 +128,13 @@ static void init_cols(void) {
     // not needed, already done as part of init_mcp23018()
 
     // init on teensy
-    setPinInputHigh(F0);
-    setPinInputHigh(F1);
-    setPinInputHigh(F4);
-    setPinInputHigh(F5);
-    setPinInputHigh(F6);
-    setPinInputHigh(F7);
-    setPinInputHigh(D7);
+    gpio_set_pin_input_high(F0);
+    gpio_set_pin_input_high(F1);
+    gpio_set_pin_input_high(F4);
+    gpio_set_pin_input_high(F5);
+    gpio_set_pin_input_high(F6);
+    gpio_set_pin_input_high(F7);
+    gpio_set_pin_input_high(D7);
 }
 
 static matrix_row_t read_cols(uint8_t row) {
@@ -175,13 +175,13 @@ static void unselect_rows(void) {
     // direction
 
     // unselect on teensy
-    setPinInput(B0);
-    setPinInput(B1);
-    setPinInput(B2);
-    setPinInput(B3);
-    setPinInput(D2);
-    setPinInput(D3);
-    setPinInput(C6);
+    gpio_set_pin_input(B0);
+    gpio_set_pin_input(B1);
+    gpio_set_pin_input(B2);
+    gpio_set_pin_input(B3);
+    gpio_set_pin_input(D2);
+    gpio_set_pin_input(D3);
+    gpio_set_pin_input(C6);
 }
 
 static void select_row(uint8_t row) {
@@ -200,32 +200,32 @@ static void select_row(uint8_t row) {
         // Output low(DDR:1, PORT:0) to select
         switch (row) {
             case 7:
-                setPinOutput(B0);
-                writePinLow(B0);
+                gpio_set_pin_output(B0);
+                gpio_write_pin_low(B0);
                 break;
             case 8:
-                setPinOutput(B1);
-                writePinLow(B1);
+                gpio_set_pin_output(B1);
+                gpio_write_pin_low(B1);
                 break;
             case 9:
-                setPinOutput(B2);
-                writePinLow(B2);
+                gpio_set_pin_output(B2);
+                gpio_write_pin_low(B2);
                 break;
             case 10:
-                setPinOutput(B3);
-                writePinLow(B3);
+                gpio_set_pin_output(B3);
+                gpio_write_pin_low(B3);
                 break;
             case 11:
-                setPinOutput(D2);
-                writePinLow(D2);
+                gpio_set_pin_output(D2);
+                gpio_write_pin_low(D2);
                 break;
             case 12:
-                setPinOutput(D3);
-                writePinLow(D3);
+                gpio_set_pin_output(D3);
+                gpio_write_pin_low(D3);
                 break;
             case 13:
-                setPinOutput(C6);
-                writePinLow(C6);
+                gpio_set_pin_output(C6);
+                gpio_write_pin_low(C6);
                 break;
         }
     }

keyboards/bandominedoni/bandominedoni.c

@@ -70,14 +70,14 @@ led_config_t g_led_config = {
 
 #if defined(SPLIT_HAND_MATRIX_GRID)
 static uint8_t peek_matrix_intersection(pin_t out_pin, pin_t in_pin) {
-    setPinInputHigh(in_pin);
-    setPinOutput(out_pin);
-    writePinLow(out_pin);
+    gpio_set_pin_input_high(in_pin);
+    gpio_set_pin_output(out_pin);
+    gpio_write_pin_low(out_pin);
     // It's almost unnecessary, but wait until it's down to low, just in case.
     wait_us(1);
-    uint8_t pin_state = readPin(in_pin);
+    uint8_t pin_state = gpio_read_pin(in_pin);
     // Set out_pin to a setting that is less susceptible to noise.
-    setPinInputHigh(out_pin);
+    gpio_set_pin_input_high(out_pin);
     matrix_io_delay();  // Wait for the pull-up to go HIGH.
     return pin_state;
 }
@@ -93,8 +93,8 @@ static enum { UNKNOWN, LEFT, RIGHT } hand_side = UNKNOWN;
     if (hand_side == UNKNOWN) {
 #if defined(SPLIT_HAND_PIN)
         // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
-        setPinInput(SPLIT_HAND_PIN);
-        hand_side = readPin(SPLIT_HAND_PIN) ? LEFT : RIGHT;
+        gpio_set_pin_input(SPLIT_HAND_PIN);
+        hand_side = gpio_read_pin(SPLIT_HAND_PIN) ? LEFT : RIGHT;
         return (hand_side == LEFT);
 #elif defined(SPLIT_HAND_MATRIX_GRID)
 #    ifdef SPLIT_HAND_MATRIX_GRID_LOW_IS_LEFT

keyboards/barleycorn_smd/matrix.c

@@ -23,17 +23,17 @@ static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
 
 static void unselect_rows(void) {
     for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
-        setPinInputHigh(row_pins[x]);
+        gpio_set_pin_input_high(row_pins[x]);
     }
 }
 
 static void select_row(uint8_t row) {
-    setPinOutput(row_pins[row]);
-    writePinLow(row_pins[row]);
+    gpio_set_pin_output(row_pins[row]);
+    gpio_write_pin_low(row_pins[row]);
 }
 
 static void unselect_row(uint8_t row) {
-    setPinInputHigh(row_pins[row]);
+    gpio_set_pin_input_high(row_pins[row]);
 }
 
 static void init_pins(void) {
@@ -46,7 +46,7 @@ static void init_pins(void) {
 
     for (uint8_t x = 0; x < MATRIX_COLS; x++) {
         if ( x < 8 ) {
-            setPinInputHigh(col_pins[x]);
+            gpio_set_pin_input_high(col_pins[x]);
         }
     }
 }
@@ -111,7 +111,7 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
                 pin_state = port_expander_col_buffer[1] & (1 << 1);
                 break;
             default :
-                pin_state = readPin(col_pins[col_index]);
+                pin_state = gpio_read_pin(col_pins[col_index]);
         }
 
         // Populate the matrix row with the state of the col pin

keyboards/bastardkb/charybdis/charybdis.c

@@ -371,12 +371,12 @@ void housekeeping_task_kb(void) {
 
 #if defined(KEYBOARD_bastardkb_charybdis_3x5_blackpill) || defined(KEYBOARD_bastardkb_charybdis_4x6_blackpill)
 void keyboard_pre_init_kb(void) {
-    setPinInputHigh(A0);
+    gpio_set_pin_input_high(A0);
     keyboard_pre_init_user();
 }
 
 void matrix_scan_kb(void) {
-    if (!readPin(A0)) {
+    if (!gpio_read_pin(A0)) {
         reset_keyboard();
     }
     matrix_scan_user();

keyboards/bear_face/v1/v1.c

@@ -19,7 +19,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 void keyboard_pre_init_kb(void) {
     //Sets LED pin as output
-    setPinOutput(F7);
+    gpio_set_pin_output(F7);
 
     keyboard_pre_init_user();
 }
@@ -28,7 +28,7 @@ bool led_update_kb(led_t led_state) {
     // Caps Lock LED indicator toggling code here
     bool res = led_update_user(led_state);
     if(res) {
-        writePin(F7, led_state.caps_lock);
+        gpio_write_pin(F7, led_state.caps_lock);
     }
     return res;
 }

keyboards/bear_face/v2/v2.c

@@ -19,7 +19,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 void keyboard_pre_init_kb(void) {
     //Sets LED pin as output
-    setPinOutput(F7);
+    gpio_set_pin_output(F7);
 
     keyboard_pre_init_user();
 }
@@ -28,7 +28,7 @@ bool led_update_kb(led_t led_state) {
     // Caps Lock LED indicator toggling code here
     bool res = led_update_user(led_state);
     if(res) {
-        writePin(F7, led_state.caps_lock);
+        gpio_write_pin(F7, led_state.caps_lock);
     }
     return res;
 }

keyboards/bioi/g60/g60.c

@@ -15,14 +15,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(F0);
-    writePinHigh(F0);
+    gpio_set_pin_output(F0);
+    gpio_write_pin_high(F0);
     keyboard_pre_init_user();
 }
 
 bool led_update_kb(led_t led_state) {
     if (led_update_user(led_state)) {
-        writePin(F0, !led_state.caps_lock);
+        gpio_write_pin(F0, !led_state.caps_lock);
     }
     return true;
 }

keyboards/bioi/morgan65/morgan65.c

@@ -15,14 +15,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(F0);
-    writePinHigh(F0);
+    gpio_set_pin_output(F0);
+    gpio_write_pin_high(F0);
     keyboard_pre_init_user();
 }
 
 bool led_update_kb(led_t led_state) {
     if (led_update_user(led_state)) {
-        writePin(F0, !led_state.caps_lock);
+        gpio_write_pin(F0, !led_state.caps_lock);
     }
     return true;
 }

keyboards/bioi/s65/s65.c

@@ -14,14 +14,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #include "quantum.h"
 void keyboard_pre_init_kb(void) {
-    setPinOutput(F0);
-    writePinHigh(F0);
+    gpio_set_pin_output(F0);
+    gpio_write_pin_high(F0);
     keyboard_pre_init_user();
 }
 
 bool led_update_kb(led_t led_state) {
     if (led_update_user(led_state)) {
-        writePin(F0, !led_state.caps_lock);
+        gpio_write_pin(F0, !led_state.caps_lock);
     }
     return true;
 }

keyboards/blu/vimclutch/vimclutch.c

@@ -18,8 +18,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 void keyboard_pre_init_kb(void)
 {
-	setPinOutput(F4);
-	setPinOutput(F5);
+	gpio_set_pin_output(F4);
+	gpio_set_pin_output(F5);
 
 	keyboard_pre_init_user();
 };

keyboards/bobpad/bobpad.c

@@ -19,7 +19,7 @@
 bool led_update_kb(led_t led_state) {
     if (!led_update_user(led_state)) { return false; }
     
-    writePin(LED_CAPS_LOCK_PIN, led_state.caps_lock);
+    gpio_write_pin(LED_CAPS_LOCK_PIN, led_state.caps_lock);
     return true;
 };
 

keyboards/bpiphany/ghost_squid/ghost_squid.c

@@ -18,8 +18,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "ghost_squid.h"
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(D0);
-    writePinLow(D0);
+    gpio_set_pin_output(D0);
+    gpio_write_pin_low(D0);
     fn_led_off();
     
     keyboard_pre_init_user();

keyboards/bpiphany/ghost_squid/ghost_squid.h

@@ -19,5 +19,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "quantum.h"
 
-#define fn_led_on() writePinLow(D0)
-#define fn_led_off() writePinHigh(D0)
+#define fn_led_on() gpio_write_pin_low(D0)
+#define fn_led_off() gpio_write_pin_high(D0)

keyboards/bpiphany/ghost_squid/matrix.c

@@ -55,22 +55,22 @@ void select_col(uint8_t col) {
 
 void matrix_init_custom(void) {
     /* Column output pins */
-    setPinOutput(D1);
-    setPinOutput(D2);
-    setPinOutput(D3);
-    setPinOutput(D4);
-    setPinOutput(D5);
-    setPinOutput(D6);
+    gpio_set_pin_output(D1);
+    gpio_set_pin_output(D2);
+    gpio_set_pin_output(D3);
+    gpio_set_pin_output(D4);
+    gpio_set_pin_output(D5);
+    gpio_set_pin_output(D6);
 
     /* Row input pins */
-    writePinHigh(B0);
-    writePinHigh(B1);
-    writePinHigh(B2);
-    writePinHigh(B3);
-    writePinHigh(B4);
-    writePinHigh(B5);
-    writePinHigh(B6);
-    writePinHigh(C2);
+    gpio_write_pin_high(B0);
+    gpio_write_pin_high(B1);
+    gpio_write_pin_high(B2);
+    gpio_write_pin_high(B3);
+    gpio_write_pin_high(B4);
+    gpio_write_pin_high(B5);
+    gpio_write_pin_high(B6);
+    gpio_write_pin_high(C2);
 }
 
 bool matrix_scan_custom(matrix_row_t current_matrix[]) {

keyboards/capsunlocked/cu75/cu75.c

@@ -20,12 +20,12 @@ void matrix_init_kb(void)
     audio_init();
     PLAY_SONG(test_sound);
     // Fix port B5
-    setPinInput(B5);
-    writePinHigh(B5);
+    gpio_set_pin_input(B5);
+    gpio_write_pin_high(B5);
 #else
     // If we're not using the audio pin, drive it low
-    setPinOutput(C6);
-    writePinLow(C6);
+    gpio_set_pin_output(C6);
+    gpio_write_pin_low(C6);
 #endif
 }
 

keyboards/capsunlocked/cu80/v2/v2.c

@@ -3,7 +3,7 @@
 #include "quantum.h"
 
 void matrix_init_kb(void) {
-    setPinOutput(E6);
+    gpio_set_pin_output(E6);
     matrix_init_user();
 }
 

keyboards/centromere/centromere.c

@@ -2,23 +2,23 @@
 
 void led_init(void) {
 #if MCU == atmega32u2
-    setPinOutput(C4); // Set red LED pin as output
-    setPinOutput(C5); // Set blue LED pin as output
-    setPinOutput(D1); // Set green LED pin as output
+    gpio_set_pin_output(C4); // Set red LED pin as output
+    gpio_set_pin_output(C5); // Set blue LED pin as output
+    gpio_set_pin_output(D1); // Set green LED pin as output
 
-    writePinHigh(C4); // Turn off red LED pin
-    writePinHigh(C5); // Turn off blue LED pin
-    writePinHigh(D1); // Turn off green LED pin
+    gpio_write_pin_high(C4); // Turn off red LED pin
+    gpio_write_pin_high(C5); // Turn off blue LED pin
+    gpio_write_pin_high(D1); // Turn off green LED pin
 
 #else
 
-    setPinOutput(F4); // Set red LED pin as output
-    setPinOutput(F5); // Set blue LED pin as output
-    setPinOutput(D1); // Set green LED pin as output
+    gpio_set_pin_output(F4); // Set red LED pin as output
+    gpio_set_pin_output(F5); // Set blue LED pin as output
+    gpio_set_pin_output(D1); // Set green LED pin as output
 
-    writePinHigh(F4); // Turn off red LED pin
-    writePinHigh(F5); // Turn off blue LED pin
-    writePinHigh(D1); // Turn off green LED pin
+    gpio_write_pin_high(F4); // Turn off red LED pin
+    gpio_write_pin_high(F5); // Turn off blue LED pin
+    gpio_write_pin_high(D1); // Turn off green LED pin
 
 #endif
 

keyboards/centromere/centromere.h

@@ -3,21 +3,21 @@
 #include "quantum.h"
 
 #if MCU == atmega32u2
-#define red_led_off   writePinHigh(C5)
-#define red_led_on    writePinLow(C5)
-#define blu_led_off   writePinHigh(C4)
-#define blu_led_on    writePinLow(C4)
+#define red_led_off   gpio_write_pin_high(C5)
+#define red_led_on    gpio_write_pin_low(C5)
+#define blu_led_off   gpio_write_pin_high(C4)
+#define blu_led_on    gpio_write_pin_low(C4)
 
 #else
-#define red_led_off   writePinHigh(F5)
-#define red_led_on    writePinLow(F5)
-#define blu_led_off   writePinHigh(F4)
-#define blu_led_on    writePinLow(F4)
+#define red_led_off   gpio_write_pin_high(F5)
+#define red_led_on    gpio_write_pin_low(F5)
+#define blu_led_off   gpio_write_pin_high(F4)
+#define blu_led_on    gpio_write_pin_low(F4)
 
 #endif
 
-#define grn_led_off   writePinHigh(D1)
-#define grn_led_on    writePinLow(D1)
+#define grn_led_off   gpio_write_pin_high(D1)
+#define grn_led_on    gpio_write_pin_low(D1)
 
 #define set_led_off     red_led_off; blu_led_off
 #define set_led_red     red_led_on;  grn_led_off; blu_led_off

keyboards/cheshire/curiosity/curiosity.c

@@ -1,17 +1,17 @@
 #include "quantum.h"
 
 void matrix_init_board(void){
-    setPinOutput(A8);
-    setPinOutput(A9);
-    setPinOutput(A10);
+    gpio_set_pin_output(A8);
+    gpio_set_pin_output(A9);
+    gpio_set_pin_output(A10);
 }
 
 bool led_update_kb(led_t led_state) {
     bool runDefault = led_update_user(led_state);
     if (runDefault) {
-      writePin(A8, !led_state.num_lock);
-      writePin(A9, !led_state.caps_lock);
-      writePin(A10, !led_state.scroll_lock);
+      gpio_write_pin(A8, !led_state.num_lock);
+      gpio_write_pin(A9, !led_state.caps_lock);
+      gpio_write_pin(A10, !led_state.scroll_lock);
     }
     return runDefault;
 }

keyboards/cipulot/common/ec_switch_matrix.c

@@ -54,19 +54,19 @@ static adc_mux adcMux;
 void init_row(void) {
     // Set all row pins as output and low
     for (uint8_t idx = 0; idx < MATRIX_ROWS; idx++) {
-        setPinOutput(row_pins[idx]);
-        writePinLow(row_pins[idx]);
+        gpio_set_pin_output(row_pins[idx]);
+        gpio_write_pin_low(row_pins[idx]);
     }
 }
 
 // Initialize the multiplexers
 void init_amux(void) {
     for (uint8_t idx = 0; idx < AMUX_COUNT; idx++) {
-        setPinOutput(amux_en_pins[idx]);
-        writePinLow(amux_en_pins[idx]);
+        gpio_set_pin_output(amux_en_pins[idx]);
+        gpio_write_pin_low(amux_en_pins[idx]);
     }
     for (uint8_t idx = 0; idx < AMUX_SEL_PINS_COUNT; idx++) {
-        setPinOutput(amux_sel_pins[idx]);
+        gpio_set_pin_output(amux_sel_pins[idx]);
     }
 }
 
@@ -75,13 +75,13 @@ void select_amux_channel(uint8_t channel, uint8_t col) {
     // Get the channel for the specified multiplexer
     uint8_t ch = amux_n_col_channels[channel][col];
     // momentarily disable specified multiplexer
-    writePinHigh(amux_en_pins[channel]);
+    gpio_write_pin_high(amux_en_pins[channel]);
     // Select the multiplexer channel
     for (uint8_t i = 0; i < AMUX_SEL_PINS_COUNT; i++) {
-        writePin(amux_sel_pins[i], ch & (1 << i));
+        gpio_write_pin(amux_sel_pins[i], ch & (1 << i));
     }
     // re enable specified multiplexer
-    writePinLow(amux_en_pins[channel]);
+    gpio_write_pin_low(amux_en_pins[channel]);
 }
 
 // Disable all the unused multiplexers
@@ -89,28 +89,28 @@ void disable_unused_amux(uint8_t channel) {
     // disable all the other multiplexers apart from the current selected one
     for (uint8_t idx = 0; idx < AMUX_COUNT; idx++) {
         if (idx != channel) {
-            writePinHigh(amux_en_pins[idx]);
+            gpio_write_pin_high(amux_en_pins[idx]);
         }
     }
 }
 // Discharge the peak hold capacitor
 void discharge_capacitor(void) {
 #ifdef OPEN_DRAIN_SUPPORT
-    writePinLow(DISCHARGE_PIN);
+    gpio_write_pin_low(DISCHARGE_PIN);
 #else
-    writePinLow(DISCHARGE_PIN);
-    setPinOutput(DISCHARGE_PIN);
+    gpio_write_pin_low(DISCHARGE_PIN);
+    gpio_set_pin_output(DISCHARGE_PIN);
 #endif
 }
 
 // Charge the peak hold capacitor
 void charge_capacitor(uint8_t row) {
 #ifdef OPEN_DRAIN_SUPPORT
-    writePinHigh(DISCHARGE_PIN);
+    gpio_write_pin_high(DISCHARGE_PIN);
 #else
-    setPinInput(DISCHARGE_PIN);
+    gpio_set_pin_input(DISCHARGE_PIN);
 #endif
-    writePinHigh(row_pins[row]);
+    gpio_write_pin_high(row_pins[row]);
 }
 
 // Initialize the peripherals pins
@@ -123,11 +123,11 @@ int ec_init(void) {
     adc_read(adcMux);
 
     // Initialize discharge pin as discharge mode
-    writePinLow(DISCHARGE_PIN);
+    gpio_write_pin_low(DISCHARGE_PIN);
 #ifdef OPEN_DRAIN_SUPPORT
-    setPinOutputOpenDrain(DISCHARGE_PIN);
+    gpio_set_pin_output_open_drain(DISCHARGE_PIN);
 #else
-    setPinOutput(DISCHARGE_PIN);
+    gpio_set_pin_output(DISCHARGE_PIN);
 #endif
 
     // Initialize drive lines
@@ -212,7 +212,7 @@ uint16_t ec_readkey_raw(uint8_t channel, uint8_t row, uint8_t col) {
     select_amux_channel(channel, col);
 
     // Set the row pin to low state to avoid ghosting
-    writePinLow(row_pins[row]);
+    gpio_write_pin_low(row_pins[row]);
 
     ATOMIC_BLOCK_FORCEON {
         // Set the row pin to high state and have capacitor charge

keyboards/clueboard/2x1800/2019/2019.c

@@ -17,14 +17,14 @@
 
 void matrix_init_kb(void) {
     // Set our LED pins as output
-    setPinOutput(D6);
-    setPinOutput(B4);
-    setPinOutput(B5);
-    setPinOutput(B6);
+    gpio_set_pin_output(D6);
+    gpio_set_pin_output(B4);
+    gpio_set_pin_output(B5);
+    gpio_set_pin_output(B6);
 
     // Set our Tilt Sensor pins as input
-    setPinInputHigh(SHAKE_PIN_A);
-    setPinInputHigh(SHAKE_PIN_B);
+    gpio_set_pin_input_high(SHAKE_PIN_A);
+    gpio_set_pin_input_high(SHAKE_PIN_B);
 
     // Run the keymap level init
     matrix_init_user();
@@ -43,12 +43,12 @@ void check_encoder_buttons(void) {
 	if (drawing_mode) {
             dprintf("Turning drawing mode off.\n");
             drawing_mode = false;
-            writePinLow(D6);
+            gpio_write_pin_low(D6);
 	    unregister_code(KC_BTN1);
 	} else {
             dprintf("Turning drawing mode on.\n");
             drawing_mode = true;
-            writePinHigh(D6);
+            gpio_write_pin_high(D6);
 	    register_code(KC_BTN1);
 	}
     }
@@ -65,7 +65,7 @@ void matrix_scan_kb(void) {
 #ifdef SHAKE_ENABLE
     // Read the current state of the tilt sensor. It is physically
     // impossible for both pins to register a low state at the same time.
-    uint8_t tilt_read = (readPin(SHAKE_PIN_A) << 4) | readPin(SHAKE_PIN_B);
+    uint8_t tilt_read = (gpio_read_pin(SHAKE_PIN_A) << 4) | gpio_read_pin(SHAKE_PIN_B);
 
     // Check to see if the tilt sensor has changed state since our last read
     if (tilt_state != tilt_read) {
@@ -136,9 +136,9 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if(res) {
-        writePin(B4, !led_state.num_lock);
-        writePin(B5, !led_state.caps_lock);
-        writePin(B6, !led_state.scroll_lock);
+        gpio_write_pin(B4, !led_state.num_lock);
+        gpio_write_pin(B5, !led_state.caps_lock);
+        gpio_write_pin(B6, !led_state.scroll_lock);
     }
 
     return res;

keyboards/clueboard/2x1800/2021/max7219.c

@@ -206,8 +206,8 @@ void max7219_init(void) {
     wait_ms(1500);
     dprintf("max7219_init()\n");
 
-    setPinOutput(MAX7219_LOAD);
-    writePinHigh(MAX7219_LOAD);
+    gpio_set_pin_output(MAX7219_LOAD);
+    gpio_write_pin_high(MAX7219_LOAD);
     spi_init();
 
     for (int i=0; i<MAX7219_CONTROLLERS; i++) {

keyboards/clueboard/66/rev4/rev4.c

@@ -2,23 +2,23 @@
 
 void led_init_ports(void) {
     // Set our LED pins as output
-    setPinOutput(B13); // LED1
-    writePinLow(B13);
-    setPinOutput(B14); // LED2
-    writePinLow(B14);
-    setPinOutput(A8); // LED3
-    writePinLow(A8);
-    setPinOutput(A0); // Capslock LED
-    writePinLow(A0);
+    gpio_set_pin_output(B13); // LED1
+    gpio_write_pin_low(B13);
+    gpio_set_pin_output(B14); // LED2
+    gpio_write_pin_low(B14);
+    gpio_set_pin_output(A8); // LED3
+    gpio_write_pin_low(A8);
+    gpio_set_pin_output(A0); // Capslock LED
+    gpio_write_pin_low(A0);
 }
 
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if(res) {
-        writePin(B13, led_state.num_lock);
-        writePin(A0, led_state.caps_lock);
-        writePin(B14, led_state.caps_lock);
-        writePin(A8, led_state.scroll_lock);
+        gpio_write_pin(B13, led_state.num_lock);
+        gpio_write_pin(A0, led_state.caps_lock);
+        gpio_write_pin(B14, led_state.caps_lock);
+        gpio_write_pin(A8, led_state.scroll_lock);
     }
     return res;
 }

keyboards/converter/palm_usb/matrix.c

@@ -95,27 +95,27 @@ void pins_init(void) {
  // set pins for pullups, Rts , power &etc. 
 
     //print ("pins setup\n");
-    setPinOutput(VCC_PIN);
-    writePinLow(VCC_PIN);
+    gpio_set_pin_output(VCC_PIN);
+    gpio_write_pin_low(VCC_PIN);
 
 #if ( HANDSPRING == 0)
 
 #ifdef CY835
-    setPinOutput(GND_PIN);
-    writePinLow(GND_PIN);
+    gpio_set_pin_output(GND_PIN);
+    gpio_write_pin_low(GND_PIN);
 
-    setPinOutput(PULLDOWN_PIN);
-    writePinLow(PULLDOWN_PIN);
+    gpio_set_pin_output(PULLDOWN_PIN);
+    gpio_write_pin_low(PULLDOWN_PIN);
 #endif
 
-    setPinInput(DCD_PIN);
-    setPinInput(RTS_PIN);
+    gpio_set_pin_input(DCD_PIN);
+    gpio_set_pin_input(RTS_PIN);
 #endif
 
 /* check that the other side isn't powered up. 
-    test=readPin(DCD_PIN);
+    test=gpio_read_pin(DCD_PIN);
     xprintf("b%02X:", test);
-    test=readPin(RTS_PIN);
+    test=gpio_read_pin(RTS_PIN);
     xprintf("%02X\n", test);
 */
  
@@ -128,16 +128,16 @@ uint8_t rts_reset(void) {
 // On boot, we keep rts as input, then switch roles here
 // on leaving sleep, we toggle the same way
 
-    firstread=readPin(RTS_PIN);
+    firstread=gpio_read_pin(RTS_PIN);
    // printf("r%02X:", firstread);
 
-    setPinOutput(RTS_PIN);
+    gpio_set_pin_output(RTS_PIN);
 
     if (firstread) {
-        writePinLow(RTS_PIN);
+        gpio_write_pin_low(RTS_PIN);
     } 
      wait_ms(10);
-    writePinHigh(RTS_PIN);
+    gpio_write_pin_high(RTS_PIN);
     
 
 /* the future is Arm 
@@ -223,9 +223,9 @@ uint8_t handspring_handshake(void) {
 }
 
 uint8_t handspring_reset(void) {
-    writePinLow(VCC_PIN);
+    gpio_write_pin_low(VCC_PIN);
     wait_ms(5);
-    writePinHigh(VCC_PIN);
+    gpio_write_pin_high(VCC_PIN);
 
     if ( handspring_handshake() ) {
         last_activity = timer_read();
@@ -249,7 +249,7 @@ void matrix_init(void)
 #endif
 
     print("power up\n");
-    writePinHigh(VCC_PIN);
+    gpio_write_pin_high(VCC_PIN);
 
     // wait for DCD strobe from keyboard - it will do this 
     // up to 3 times, then the board needs the RTS toggled to try again
@@ -264,7 +264,7 @@ void matrix_init(void)
     }
 
 #else  /// Palm / HP  device with DCD
-    while( !readPin(DCD_PIN) ) {;} 
+    while( !gpio_read_pin(DCD_PIN) ) {;} 
     print("dcd\n");
 
     rts_reset(); // at this point the keyboard should think all is well. 

keyboards/converter/siemens_tastatur/matrix.c

@@ -79,29 +79,29 @@ static void pal_cb(void* unused) {
 
 void matrix_init(void) {
     //Set I/O as pull-up inputs to read states
-    setPinInputHigh(A0);
-    setPinInputHigh(A1);
-    setPinInputHigh(A2);
-    setPinInputHigh(A3);
-    setPinInputHigh(A4);
-    setPinInputHigh(A5);
-    setPinInputHigh(A6);
-    setPinInputHigh(A7);
-    setPinInputHigh(A8);
-    setPinInputHigh(A9);
-    setPinInputHigh(A10);
-    setPinInputHigh(B3);
-    setPinInputHigh(B4);
-    setPinInputHigh(B5);
-    setPinInputHigh(B6);
-    setPinInputHigh(B7);
-    setPinInputHigh(B8);
-    setPinInputHigh(B9);
-    setPinInputHigh(B11);
-    setPinInputHigh(B12);
-    setPinInputHigh(B13);
-    setPinInputHigh(B14);
-    setPinInputHigh(B15);
+    gpio_set_pin_input_high(A0);
+    gpio_set_pin_input_high(A1);
+    gpio_set_pin_input_high(A2);
+    gpio_set_pin_input_high(A3);
+    gpio_set_pin_input_high(A4);
+    gpio_set_pin_input_high(A5);
+    gpio_set_pin_input_high(A6);
+    gpio_set_pin_input_high(A7);
+    gpio_set_pin_input_high(A8);
+    gpio_set_pin_input_high(A9);
+    gpio_set_pin_input_high(A10);
+    gpio_set_pin_input_high(B3);
+    gpio_set_pin_input_high(B4);
+    gpio_set_pin_input_high(B5);
+    gpio_set_pin_input_high(B6);
+    gpio_set_pin_input_high(B7);
+    gpio_set_pin_input_high(B8);
+    gpio_set_pin_input_high(B9);
+    gpio_set_pin_input_high(B11);
+    gpio_set_pin_input_high(B12);
+    gpio_set_pin_input_high(B13);
+    gpio_set_pin_input_high(B14);
+    gpio_set_pin_input_high(B15);
 
     memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
     memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t));
@@ -207,7 +207,7 @@ uint8_t matrix_scan(void) {
                  matrix[3] = 0x00;
     }
     //Special case for Shift
-    if (readPin(B11) == 0) { matrix[3] |= 0x01; }
+    if (gpio_read_pin(B11) == 0) { matrix[3] |= 0x01; }
 
     porta_buffer = 65535;
     portb_buffer = 65535;

keyboards/converter/xt_usb/config.h

@@ -34,10 +34,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* hard reset: low pulse for 500ms and after that HiZ for safety */
 #define XT_RESET() do { \
-    writePinLow(XT_RST_PIN); \
-    setPinOutput(XT_RST_PIN); \
+    gpio_write_pin_low(XT_RST_PIN); \
+    gpio_set_pin_output(XT_RST_PIN); \
     wait_ms(500); \
-    setPinInput(XT_RST_PIN); \
+    gpio_set_pin_input(XT_RST_PIN); \
 } while (0)
 
 /* INT1 for falling edge of clock line */

keyboards/converter/xt_usb/xt.h

@@ -43,30 +43,30 @@ POSSIBILITY OF SUCH DAMAGE.
 
 #define XT_DATA_IN()               \
     do {                           \
-        setPinInput(XT_DATA_PIN);  \
-        writePinHigh(XT_DATA_PIN); \
+        gpio_set_pin_input(XT_DATA_PIN);  \
+        gpio_write_pin_high(XT_DATA_PIN); \
     } while (0)
 
-#define XT_DATA_READ() readPin(XT_DATA_PIN)
+#define XT_DATA_READ() gpio_read_pin(XT_DATA_PIN)
 
 #define XT_DATA_LO()               \
     do {                           \
-        writePinLow(XT_DATA_PIN);  \
-        setPinOutput(XT_DATA_PIN); \
+        gpio_write_pin_low(XT_DATA_PIN);  \
+        gpio_set_pin_output(XT_DATA_PIN); \
     } while (0)
 
 #define XT_CLOCK_IN()               \
     do {                            \
-        setPinInput(XT_CLOCK_PIN);  \
-        writePinHigh(XT_CLOCK_PIN); \
+        gpio_set_pin_input(XT_CLOCK_PIN);  \
+        gpio_write_pin_high(XT_CLOCK_PIN); \
     } while (0)
 
-#define XT_CLOCK_READ() readPin(XT_CLOCK_PIN)
+#define XT_CLOCK_READ() gpio_read_pin(XT_CLOCK_PIN)
 
 #define XT_CLOCK_LO()               \
     do {                            \
-        writePinLow(XT_CLOCK_PIN);  \
-        setPinOutput(XT_CLOCK_PIN); \
+        gpio_write_pin_low(XT_CLOCK_PIN);  \
+        gpio_set_pin_output(XT_CLOCK_PIN); \
     } while (0)
 
 void xt_host_init(void);

keyboards/custommk/evo70_r2/matrix.c

@@ -10,7 +10,7 @@ void matrix_wait_for_pin(pin_t pin, uint8_t target_state) {
     rtcnt_t start = chSysGetRealtimeCounterX();
     rtcnt_t end   = start + 5000;
     while (chSysIsCounterWithinX(chSysGetRealtimeCounterX(), start, end)) {
-        if (readPin(pin) == target_state) {
+        if (gpio_read_pin(pin) == target_state) {
             break;
         }
     }
@@ -27,22 +27,22 @@ void matrix_wait_for_port(stm32_gpio_t *port, uint32_t target_bitmask) {
 }
 
 void shift_pulse_clock(void) {
-        writePinHigh(COL_SHIFT_CLK_PIN);
+        gpio_write_pin_high(COL_SHIFT_CLK_PIN);
         matrix_wait_for_pin(COL_SHIFT_CLK_PIN, 1);
-        writePinLow(COL_SHIFT_CLK_PIN);
+        gpio_write_pin_low(COL_SHIFT_CLK_PIN);
 }
 
 void matrix_init_custom(void) {
     //set all row pins as input with pullups
     for (int i = 0; i < MATRIX_ROWS; ++i) {
-        writePinHigh(row_pins[i]);
-        setPinInputHigh(row_pins[i]);
+        gpio_write_pin_high(row_pins[i]);
+        gpio_set_pin_input_high(row_pins[i]);
     }
 
     //set all column pins high in ROW2COL matrix
-    setPinOutput(COL_SHIFT_IN_PIN);
-    setPinOutput(COL_SHIFT_CLK_PIN);
-    writePinHigh(COL_SHIFT_IN_PIN);
+    gpio_set_pin_output(COL_SHIFT_IN_PIN);
+    gpio_set_pin_output(COL_SHIFT_CLK_PIN);
+    gpio_write_pin_high(COL_SHIFT_IN_PIN);
     matrix_wait_for_pin(COL_SHIFT_IN_PIN, 1);
 
     for (int i = 0; i < MATRIX_COLS; ++i) {
@@ -54,13 +54,13 @@ void matrix_init_custom(void) {
 bool matrix_scan_custom(matrix_row_t current_matrix[]) {
     static matrix_row_t temp_matrix[MATRIX_ROWS] = {0};
 
-    writePinLow(COL_SHIFT_IN_PIN);
+    gpio_write_pin_low(COL_SHIFT_IN_PIN);
     matrix_wait_for_pin(COL_SHIFT_IN_PIN, 0);
 
     // Setup the output column pin
     shift_pulse_clock();
 
-    writePinHigh(COL_SHIFT_IN_PIN);
+    gpio_write_pin_high(COL_SHIFT_IN_PIN);
     for (int current_col = 0; current_col < MATRIX_COLS; ++current_col) {
 
         // Read the column ports

keyboards/cutie_club/wraith/wraith.c

@@ -16,7 +16,7 @@
 #include "quantum.h"
 
 void matrix_init_kb(void) {
-    setPinOutput(B0);
+    gpio_set_pin_output(B0);
 
     matrix_init_user();
 }

keyboards/dark/magnum_ergo_1/magnum_ergo_1.c

@@ -17,34 +17,34 @@
 #include "quantum.h"
 
 void keyoard_post_init_kb(void) {
-    setPinOutput(LED_CAPS_LOCK_PIN);
-    setPinOutput(LED_INDICATOR_1);
-    setPinOutput(LED_INDICATOR_2);
-    setPinOutput(LED_INDICATOR_3);
-    setPinOutput(LED_INDICATOR_4);
-    setPinOutput(LED_INDICATOR_5);
+    gpio_set_pin_output(LED_CAPS_LOCK_PIN);
+    gpio_set_pin_output(LED_INDICATOR_1);
+    gpio_set_pin_output(LED_INDICATOR_2);
+    gpio_set_pin_output(LED_INDICATOR_3);
+    gpio_set_pin_output(LED_INDICATOR_4);
+    gpio_set_pin_output(LED_INDICATOR_5);
 #ifndef LED_CAPS_LOCK_PIN
-    writePin(LED_CAPS_LOCK_PIN, 0);
+    gpio_write_pin(LED_CAPS_LOCK_PIN, 0);
 #endif
 
 #ifndef LED_INDICATOR_1
-    writePin(LED_INDICATOR_1, 0);
+    gpio_write_pin(LED_INDICATOR_1, 0);
 #endif
 
 #ifndef LED_INDICATOR_2
-    writePin(LED_INDICATOR_2, 0);
+    gpio_write_pin(LED_INDICATOR_2, 0);
 #endif
 
 #ifndef LED_INDICATOR_3
-    writePin(LED_INDICATOR_3, 0);
+    gpio_write_pin(LED_INDICATOR_3, 0);
 #endif
 
 #ifndef LED_INDICATOR_4
-    writePin(LED_INDICATOR_4, 0);
+    gpio_write_pin(LED_INDICATOR_4, 0);
 #endif
 
 #ifndef LED_INDICATOR_5
-    writePin(LED_INDICATOR_5, 0);
+    gpio_write_pin(LED_INDICATOR_5, 0);
 #endif
     keyboard_post_init_user();
 }
@@ -53,39 +53,39 @@ layer_state_t layer_state_set_kb(layer_state_t state) {
         switch (get_highest_layer(state)) {
         case 1:
 #ifdef LED_INDICATOR_4
-            writePin(LED_INDICATOR_4, 1);
+            gpio_write_pin(LED_INDICATOR_4, 1);
 #endif
 
 #ifdef LED_INDICATOR_5
-            writePin(LED_INDICATOR_5, 1);
+            gpio_write_pin(LED_INDICATOR_5, 1);
 #endif
             break;
         case 2:
 #ifdef LED_INDICATOR_1
-            writePin(LED_INDICATOR_1, 1);
+            gpio_write_pin(LED_INDICATOR_1, 1);
 #endif
 #ifdef LED_INDICATOR_2
-            writePin(LED_INDICATOR_2, 1);
+            gpio_write_pin(LED_INDICATOR_2, 1);
 #endif
 #ifdef LED_INDICATOR_3
-            writePin(LED_INDICATOR_3, 1);
+            gpio_write_pin(LED_INDICATOR_3, 1);
 #endif
             break;
         default:
 #ifdef LED_INDICATOR_1
-            writePin(LED_INDICATOR_1, 0);
+            gpio_write_pin(LED_INDICATOR_1, 0);
 #endif
 #ifdef LED_INDICATOR_2
-            writePin(LED_INDICATOR_2, 0);
+            gpio_write_pin(LED_INDICATOR_2, 0);
 #endif
 #ifdef LED_INDICATOR_3
-            writePin(LED_INDICATOR_3, 0);
+            gpio_write_pin(LED_INDICATOR_3, 0);
 #endif
 #ifdef LED_INDICATOR_4
-            writePin(LED_INDICATOR_4, 0);
+            gpio_write_pin(LED_INDICATOR_4, 0);
 #endif
 #ifdef LED_INDICATOR_5
-            writePin(LED_INDICATOR_5, 0);
+            gpio_write_pin(LED_INDICATOR_5, 0);
 #endif
             break;
     }

keyboards/darkproject/kd83a_bfg_edition/kd83a_bfg_edition.c

@@ -132,9 +132,9 @@ void spi_init(void) {
         is_initialised = true;
 
         // Try releasing special pins for a short time
-        setPinInput(SPI_SCK_PIN);
-        setPinInput(SPI_MOSI_PIN);
-        setPinInput(SPI_MISO_PIN);
+        gpio_set_pin_input(SPI_SCK_PIN);
+        gpio_set_pin_input(SPI_MOSI_PIN);
+        gpio_set_pin_input(SPI_MISO_PIN);
 
         chThdSleepMilliseconds(10);
 
@@ -147,12 +147,12 @@ void spi_init(void) {
 #endif
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(C0);
-    setPinOutput(C15);
+    gpio_set_pin_output(C0);
+    gpio_set_pin_output(C15);
     keyboard_pre_init_user();
 };
 void housekeeping_task_kb(void) {
-    writePin(C15, keymap_config.no_gui);
+    gpio_write_pin(C15, keymap_config.no_gui);
 };
 
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {

keyboards/darkproject/kd87a_bfg_edition/kd87a_bfg_edition.c

@@ -133,9 +133,9 @@ void spi_init(void) {
         is_initialised = true;
 
         // Try releasing special pins for a short time
-        setPinInput(SPI_SCK_PIN);
-        setPinInput(SPI_MOSI_PIN);
-        setPinInput(SPI_MISO_PIN);
+        gpio_set_pin_input(SPI_SCK_PIN);
+        gpio_set_pin_input(SPI_MOSI_PIN);
+        gpio_set_pin_input(SPI_MISO_PIN);
 
         chThdSleepMilliseconds(10);
 
@@ -148,12 +148,12 @@ void spi_init(void) {
 #endif
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(C0);
-    setPinOutput(C15);
+    gpio_set_pin_output(C0);
+    gpio_set_pin_output(C15);
     keyboard_pre_init_user();
 };
 void housekeeping_task_kb(void) {
-    writePin(C15, keymap_config.no_gui);
+    gpio_write_pin(C15, keymap_config.no_gui);
 };
 
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {

keyboards/dekunukem/duckypad/duckypad.c

@@ -21,11 +21,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(A0);
-    writePinHigh(A0);
-    writePinLow(A0);
+    gpio_set_pin_output(A0);
+    gpio_write_pin_high(A0);
+    gpio_write_pin_low(A0);
     wait_ms(10);
-    writePinHigh(A0);
+    gpio_write_pin_high(A0);
 
     keyboard_pre_init_user();
 }

keyboards/dichotomy/dichotomy.c

@@ -60,13 +60,13 @@ bool pointing_device_task(void){
 }
 
 void led_init(void) {
-    setPinOutput(D1);
-    setPinOutput(F5);
-    setPinOutput(F6);
+    gpio_set_pin_output(D1);
+    gpio_set_pin_output(F5);
+    gpio_set_pin_output(F6);
 
-	writePinHigh(D1);
-    writePinHigh(F5);
-    writePinHigh(F6);
+	gpio_write_pin_high(D1);
+    gpio_write_pin_high(F5);
+    gpio_write_pin_high(F6);
 }
 
 

keyboards/dichotomy/dichotomy.h

@@ -4,12 +4,12 @@
 #include "pointing_device.h"
 #include "quantum.h"
 
-#define red_led_off()   writePinHigh(F6)
-#define red_led_on()    writePinLow(F6)
-#define blu_led_off()   writePinHigh(F5)
-#define blu_led_on()    writePinLow(F5)
-#define grn_led_off()   writePinHigh(D1)
-#define grn_led_on()    writePinLow(D1)
+#define red_led_off()   gpio_write_pin_high(F6)
+#define red_led_on()    gpio_write_pin_low(F6)
+#define blu_led_off()   gpio_write_pin_high(F5)
+#define blu_led_on()    gpio_write_pin_low(F5)
+#define grn_led_off()   gpio_write_pin_high(D1)
+#define grn_led_on()    gpio_write_pin_low(D1)
 
 #define red_led(flag)   if (flag) red_led_on(); else red_led_off()
 #define blu_led(flag)   if (flag) blu_led_on(); else blu_led_off()

keyboards/dinofizz/fnrow/v1/v1.c

@@ -17,8 +17,8 @@
 
 void keyboard_pre_init_kb(void) {
     // Immediately set the LED pin as an output and set it ON
-    setPinOutput(A15);
-    writePinHigh(A15);
+    gpio_set_pin_output(A15);
+    gpio_write_pin_high(A15);
     
     keyboard_pre_init_user();
 }
@@ -26,11 +26,11 @@ void keyboard_pre_init_kb(void) {
 void keyboard_post_init_kb(void) {
     // Blink the LED so we know everything is running OK
     // Finish with LED OFF
-    writePinLow(A15);
+    gpio_write_pin_low(A15);
     wait_ms(100);
-    writePinHigh(A15);
+    gpio_write_pin_high(A15);
     wait_ms(100);
-    writePinLow(A15);
+    gpio_write_pin_low(A15);
     
     keyboard_post_init_user();
 }

keyboards/dk60/dk60.c

@@ -40,8 +40,8 @@ void matrix_init_kb(void) {
 }
 
 void led_init_ports(void) {
-    setPinOutput(E6);
-    setPinOutput(F0);
+    gpio_set_pin_output(E6);
+    gpio_set_pin_output(F0);
 }
 
 void led_update_ports(led_t led_state) {

keyboards/dk60/dk60.h

@@ -19,11 +19,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "quantum.h"
 
-inline void dk60_caps_led_on(void) { writePinHigh(E6); }
-inline void dk60_esc_led_on(void) { writePinHigh(F0); }
+inline void dk60_caps_led_on(void) { gpio_write_pin_high(E6); }
+inline void dk60_esc_led_on(void) { gpio_write_pin_high(F0); }
 
-inline void dk60_caps_led_off(void) { writePinLow(E6); }
-inline void dk60_esc_led_off(void) { writePinLow(F0); }
+inline void dk60_caps_led_off(void) { gpio_write_pin_low(E6); }
+inline void dk60_esc_led_off(void) { gpio_write_pin_low(F0); }
 
 inline void dk60_led_all_on(void) {
     dk60_caps_led_on();

keyboards/dm9records/lain/lain.c

@@ -12,7 +12,7 @@ void lain_eeconfig_update_kb(void) { eeconfig_update_kb(lain_config.raw); }
 
 void lain_set_led(uint8_t no, bool flag) {
     led_states[no] = flag;
-    writePin(leds[no], lain_config.led_enabled ? flag : false);
+    gpio_write_pin(leds[no], lain_config.led_enabled ? flag : false);
 }
 
 void lain_enable_leds(bool flag) {
@@ -20,7 +20,7 @@ void lain_enable_leds(bool flag) {
     lain_eeconfig_update_kb();
 
     for (int i = 0; i < LED_NUM; i++) {
-        writePin(leds[i], lain_config.led_enabled ? led_states[i] : false);
+        gpio_write_pin(leds[i], lain_config.led_enabled ? led_states[i] : false);
     }
 }
 
@@ -28,7 +28,7 @@ void lain_enable_leds_toggle(void) { lain_enable_leds(!lain_config.led_enabled);
 
 void led_init_ports(void) {
     for (uint8_t i = 0; i < LED_NUM; i++) {
-        setPinOutput(leds[i]);
+        gpio_set_pin_output(leds[i]);
         lain_set_led(leds[i], 0);
     }
 }

keyboards/doppelganger/doppelganger.c

@@ -16,30 +16,30 @@
 #include "quantum.h"
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(C6);
-    setPinOutput(B0);
+    gpio_set_pin_output(C6);
+    gpio_set_pin_output(B0);
 }
 
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if (res) {
-        // writePin sets the pin high for 1 and low for 0.
+        // gpio_write_pin sets the pin high for 1 and low for 0.
         // In this example the pins are inverted, setting
         // it low/0 turns it on, and high/1 turns the LED off.
         // This behavior depends on whether the LED is between the pin
         // and VCC or the pin and GND.
-        writePin(C6, !led_state.caps_lock);
+        gpio_write_pin(C6, !led_state.caps_lock);
     }
     return res;
 }
 
 __attribute__((weak)) layer_state_t layer_state_set_user(layer_state_t state) {
-    writePin(B0, !(state & (1UL << 1)));
+    gpio_write_pin(B0, !(state & (1UL << 1)));
     return state;
 }
 
 // Override core logic as we reuse SPLIT_HAND_PIN within matrix pins
 bool is_keyboard_left(void) {
-    setPinInput(SPLIT_HAND_PIN);
-    return readPin(SPLIT_HAND_PIN);
+    gpio_set_pin_input(SPLIT_HAND_PIN);
+    return gpio_read_pin(SPLIT_HAND_PIN);
 }

keyboards/dp60/matrix.c

@@ -54,10 +54,10 @@ void matrix_scan_user(void) {}
 
 void matrix_init(void)
 {
-  //setPinOutput(F0);
-  //writePinHigh(F0);
-  setPinOutput(B4);
-  writePinLow(B4);
+  //gpio_set_pin_output(F0);
+  //gpio_write_pin_high(F0);
+  gpio_set_pin_output(B4);
+  gpio_write_pin_low(B4);
 
   init_cols();
   init_rows();
@@ -123,20 +123,20 @@ void matrix_print(void)
  */
 static void init_rows(void)
 {
-  setPinInputHigh(E6);
-  setPinInputHigh(F6);
-  setPinInputHigh(F7);
-  setPinInputHigh(B7);
-  setPinInputHigh(D4);
+  gpio_set_pin_input_high(E6);
+  gpio_set_pin_input_high(F6);
+  gpio_set_pin_input_high(F7);
+  gpio_set_pin_input_high(B7);
+  gpio_set_pin_input_high(D4);
 }
 
 static uint8_t read_rows(void)
 {
-  return ((readPin(E6) ? 0 : (1 << 0)) |
-          (readPin(F6) ? 0 : (1 << 1)) |
-          (readPin(F7) ? 0 : (1 << 2)) |
-          (readPin(B7) ? 0 : (1 << 3)) |
-          (readPin(D4) ? 0 : (1 << 4)));
+  return ((gpio_read_pin(E6) ? 0 : (1 << 0)) |
+          (gpio_read_pin(F6) ? 0 : (1 << 1)) |
+          (gpio_read_pin(F7) ? 0 : (1 << 2)) |
+          (gpio_read_pin(B7) ? 0 : (1 << 3)) |
+          (gpio_read_pin(D4) ? 0 : (1 << 4)));
 }
 
 /*
@@ -164,104 +164,104 @@ static uint8_t read_rows(void)
  */
 static void init_cols(void)
 {
-  setPinOutput(F0);
-  setPinOutput(F1);
-  setPinOutput(F4);
-  setPinOutput(F5);
+  gpio_set_pin_output(F0);
+  gpio_set_pin_output(F1);
+  gpio_set_pin_output(F4);
+  gpio_set_pin_output(F5);
 
-  setPinOutput(D2);
-  setPinOutput(D3);
-  setPinOutput(D5);
-  setPinOutput(D6);
+  gpio_set_pin_output(D2);
+  gpio_set_pin_output(D3);
+  gpio_set_pin_output(D5);
+  gpio_set_pin_output(D6);
 
   unselect_cols();
 }
 
 static void unselect_cols(void)
 {
-  writePinHigh(F0);
-  writePinHigh(F1);
-  writePinHigh(F4);
-  writePinHigh(F5);
+  gpio_write_pin_high(F0);
+  gpio_write_pin_high(F1);
+  gpio_write_pin_high(F4);
+  gpio_write_pin_high(F5);
 
-  writePinHigh(D2);
-  writePinHigh(D3);
-  writePinHigh(D5);
-  writePinHigh(D6);
+  gpio_write_pin_high(D2);
+  gpio_write_pin_high(D3);
+  gpio_write_pin_high(D5);
+  gpio_write_pin_high(D6);
 }
 
 static void select_col(uint8_t col) {
 
    switch (col) {
         case 0:
-          writePinLow(F0);
-          writePinLow(F1);
-          writePinLow(F4);
+          gpio_write_pin_low(F0);
+          gpio_write_pin_low(F1);
+          gpio_write_pin_low(F4);
           break;
         case 1:
-          writePinHigh(F0);
-          writePinLow(F1);
-          writePinLow(F4);
+          gpio_write_pin_high(F0);
+          gpio_write_pin_low(F1);
+          gpio_write_pin_low(F4);
           break;
         case 2:
-          writePinLow(F0);
-          writePinHigh(F1);
-          writePinLow(F4);
+          gpio_write_pin_low(F0);
+          gpio_write_pin_high(F1);
+          gpio_write_pin_low(F4);
           break;
         case 3:
-          writePinHigh(F0);
-          writePinHigh(F1);
-          writePinLow(F4);
+          gpio_write_pin_high(F0);
+          gpio_write_pin_high(F1);
+          gpio_write_pin_low(F4);
           break;
         case 4:
-          writePinLow(F0);
-          writePinLow(F1);
-          writePinHigh(F4);
+          gpio_write_pin_low(F0);
+          gpio_write_pin_low(F1);
+          gpio_write_pin_high(F4);
           break;
         case 5:
-          writePinHigh(F0);
-          writePinLow(F1);
-          writePinHigh(F4);
+          gpio_write_pin_high(F0);
+          gpio_write_pin_low(F1);
+          gpio_write_pin_high(F4);
           break;
         case 6:
-          writePinLow(F0);
-          writePinHigh(F1);
-          writePinHigh(F4);
+          gpio_write_pin_low(F0);
+          gpio_write_pin_high(F1);
+          gpio_write_pin_high(F4);
           break;
         case 7:
-          writePinLow(D2);
-          writePinLow(D3);
-          writePinLow(D5);
+          gpio_write_pin_low(D2);
+          gpio_write_pin_low(D3);
+          gpio_write_pin_low(D5);
           break;
         case 8:
-          writePinHigh(D2);
-          writePinLow(D3);
-          writePinLow(D5);
+          gpio_write_pin_high(D2);
+          gpio_write_pin_low(D3);
+          gpio_write_pin_low(D5);
           break;
         case 9:
-          writePinLow(D2);
-          writePinHigh(D3);
-          writePinLow(D5);
+          gpio_write_pin_low(D2);
+          gpio_write_pin_high(D3);
+          gpio_write_pin_low(D5);
           break;
         case 10:
-          writePinHigh(D2);
-          writePinHigh(D3);
-          writePinLow(D5);
+          gpio_write_pin_high(D2);
+          gpio_write_pin_high(D3);
+          gpio_write_pin_low(D5);
           break;
         case 11:
-          writePinLow(D2);
-          writePinLow(D3);
-          writePinHigh(D5);
+          gpio_write_pin_low(D2);
+          gpio_write_pin_low(D3);
+          gpio_write_pin_high(D5);
           break;
         case 12:
-          writePinHigh(D2);
-          writePinLow(D3);
-          writePinHigh(D5);
+          gpio_write_pin_high(D2);
+          gpio_write_pin_low(D3);
+          gpio_write_pin_high(D5);
           break;
         case 13:
-          writePinLow(D2);
-          writePinHigh(D3);
-          writePinHigh(D5);
+          gpio_write_pin_low(D2);
+          gpio_write_pin_high(D3);
+          gpio_write_pin_high(D5);
           break;
     }
 }

keyboards/drop/lib/mux.c

@@ -22,8 +22,8 @@
 #define C2_B5_SENSE B0
 
 static inline void digital_write(pin_t pin, uint8_t level) {
-    setPinOutput(pin);
-    writePin(pin, level);
+    gpio_set_pin_output(pin);
+    gpio_write_pin(pin, level);
 }
 
 uint16_t v_con_1 = 0;
@@ -42,10 +42,10 @@ void keyboard_USB_enable(void) {
     digital_write(SRC_1, 1);
     digital_write(SRC_2, 1);
 
-    setPinInput(C1_A5_SENSE);
-    setPinInput(C1_B5_SENSE);
-    setPinInput(C2_A5_SENSE);
-    setPinInput(C2_B5_SENSE);
+    gpio_set_pin_input(C1_A5_SENSE);
+    gpio_set_pin_input(C1_B5_SENSE);
+    gpio_set_pin_input(C2_A5_SENSE);
+    gpio_set_pin_input(C2_B5_SENSE);
 
     // reset hub
     digital_write(HUB_RESET_N, 0);

keyboards/duck/orion/v3/matrix.c

@@ -56,13 +56,13 @@ void matrix_scan_user(void) {
 void indicator_init_ports(void) {
 
   // Num LED
-  setPinOutput(B4); 
+  gpio_set_pin_output(B4); 
 
   // Caps Lock
-  setPinOutput(B0); 
+  gpio_set_pin_output(B0); 
 
   // Scroll Lock
-  setPinOutput(D7); 
+  gpio_set_pin_output(D7); 
 }
 
 void matrix_init(void) {

keyboards/duck/orion/v3/v3.c

@@ -31,9 +31,9 @@
 // of the Escape key. 
 bool led_update_kb(led_t led_state) {
     if(led_update_user(led_state)) {
-        writePin(B0, !led_state.caps_lock);
-        writePin(B4, !led_state.num_lock);
-        writePin(D7, !led_state.scroll_lock);
+        gpio_write_pin(B0, !led_state.caps_lock);
+        gpio_write_pin(B4, !led_state.num_lock);
+        gpio_write_pin(D7, !led_state.scroll_lock);
     }
     return true;
 }

keyboards/dumbpad/v0x/v0x.c

@@ -17,8 +17,8 @@
 
 void keyboard_pre_init_kb(void) {
     // Set LED IO as outputs
-    setPinOutput(LED_00);
-    setPinOutput(LED_01);
+    gpio_set_pin_output(LED_00);
+    gpio_set_pin_output(LED_01);
     keyboard_pre_init_user();
 }
 
@@ -27,16 +27,16 @@ bool shutdown_kb(bool jump_to_bootloader) {
         return false;
     }
     // Shutdown LEDs
-    writePinLow(LED_00);
-    writePinLow(LED_01);
+    gpio_write_pin_low(LED_00);
+    gpio_write_pin_low(LED_01);
     return true;
 }
 
 layer_state_t layer_state_set_kb(layer_state_t state) {
     // Layer LEDs act as binary indication of current layer
     uint8_t layer = get_highest_layer(state);
-    writePin(LED_00, layer & 0b1);
-    writePin(LED_01, (layer >> 1) & 0b1);
+    gpio_write_pin(LED_00, layer & 0b1);
+    gpio_write_pin(LED_01, (layer >> 1) & 0b1);
     return layer_state_set_user(state);
 }
 
@@ -49,11 +49,11 @@ void matrix_init_kb(void) {
     // runs once when the firmware starts up
     uint8_t led_delay_ms = 80;
     for (int i = 0; i < 2; i++) {
-        writePinHigh(LED_00);
-        writePinHigh(LED_01);
+        gpio_write_pin_high(LED_00);
+        gpio_write_pin_high(LED_01);
         wait_ms(led_delay_ms);
-        writePinLow(LED_00);
-        writePinLow(LED_01);
+        gpio_write_pin_low(LED_00);
+        gpio_write_pin_low(LED_01);
         if (i < 1) {
             wait_ms(led_delay_ms);
         }

keyboards/dumbpad/v0x_dualencoder/v0x_dualencoder.c

@@ -17,8 +17,8 @@
 
 void keyboard_pre_init_kb(void) {
     // Set LED IO as outputs
-    setPinOutput(LED_00);
-    setPinOutput(LED_01);
+    gpio_set_pin_output(LED_00);
+    gpio_set_pin_output(LED_01);
     keyboard_pre_init_user();
 }
 
@@ -27,16 +27,16 @@ bool shutdown_kb(bool jump_to_bootloader) {
         return false;
     }
     // Shutdown LEDs
-    writePinLow(LED_00);
-    writePinLow(LED_01);
+    gpio_write_pin_low(LED_00);
+    gpio_write_pin_low(LED_01);
     return true;
 }
 
 layer_state_t layer_state_set_kb(layer_state_t state) {
     // Layer LEDs act as binary indication of current layer
     uint8_t layer = get_highest_layer(state);
-    writePin(LED_00, layer & 0b1);
-    writePin(LED_01, (layer >> 1) & 0b1);
+    gpio_write_pin(LED_00, layer & 0b1);
+    gpio_write_pin(LED_01, (layer >> 1) & 0b1);
     return layer_state_set_user(state);
 }
 
@@ -49,11 +49,11 @@ void matrix_init_kb(void) {
     // runs once when the firmware starts up
     uint8_t led_delay_ms = 80;
     for (int i = 0; i < 2; i++) {
-        writePinHigh(LED_00);
-        writePinHigh(LED_01);
+        gpio_write_pin_high(LED_00);
+        gpio_write_pin_high(LED_01);
         wait_ms(led_delay_ms);
-        writePinLow(LED_00);
-        writePinLow(LED_01);
+        gpio_write_pin_low(LED_00);
+        gpio_write_pin_low(LED_01);
         if (i < 1) {
             wait_ms(led_delay_ms);
         }

keyboards/dumbpad/v0x_right/v0x_right.c

@@ -17,8 +17,8 @@
 
 void keyboard_pre_init_kb(void) {
     // Set LED IO as outputs
-    setPinOutput(LED_00);
-    setPinOutput(LED_01);
+    gpio_set_pin_output(LED_00);
+    gpio_set_pin_output(LED_01);
     keyboard_pre_init_user();
 }
 
@@ -27,16 +27,16 @@ bool shutdown_kb(bool jump_to_bootloader) {
         return false;
     }
     // Shutdown LEDs
-    writePinLow(LED_00);
-    writePinLow(LED_01);
+    gpio_write_pin_low(LED_00);
+    gpio_write_pin_low(LED_01);
     return true;
 }
 
 layer_state_t layer_state_set_kb(layer_state_t state) {
     // Layer LEDs act as binary indication of current layer
     uint8_t layer = get_highest_layer(state);
-    writePin(LED_00, layer & 0b1);
-    writePin(LED_01, (layer >> 1) & 0b1);
+    gpio_write_pin(LED_00, layer & 0b1);
+    gpio_write_pin(LED_01, (layer >> 1) & 0b1);
     return layer_state_set_user(state);
 }
 
@@ -49,11 +49,11 @@ void matrix_init_kb(void) {
     // runs once when the firmware starts up
     uint8_t led_delay_ms = 80;
     for (int i = 0; i < 2; i++) {
-        writePinHigh(LED_00);
-        writePinHigh(LED_01);
+        gpio_write_pin_high(LED_00);
+        gpio_write_pin_high(LED_01);
         wait_ms(led_delay_ms);
-        writePinLow(LED_00);
-        writePinLow(LED_01);
+        gpio_write_pin_low(LED_00);
+        gpio_write_pin_low(LED_01);
         if (i < 1) {
             wait_ms(led_delay_ms);
         }

keyboards/dumbpad/v1x/v1x.c

@@ -17,9 +17,9 @@
 
 void keyboard_pre_init_kb(void) {
     // Set LED IO as outputs
-    setPinOutput(LED_00);
-    setPinOutput(LED_01);
-    setPinOutput(LED_02);
+    gpio_set_pin_output(LED_00);
+    gpio_set_pin_output(LED_01);
+    gpio_set_pin_output(LED_02);
     keyboard_pre_init_user();
 }
 
@@ -28,17 +28,17 @@ bool shutdown_kb(bool jump_to_bootloader) {
         return false;
     }
     // Shutdown LEDs
-    writePinLow(LED_00);
-    writePinLow(LED_01);
-    writePinLow(LED_02);
+    gpio_write_pin_low(LED_00);
+    gpio_write_pin_low(LED_01);
+    gpio_write_pin_low(LED_02);
     return true;
 }
 
 layer_state_t layer_state_set_kb(layer_state_t state) {
     // Layer LEDs act as binary indication of current layer
     uint8_t layer = get_highest_layer(state);
-    writePin(LED_00, layer & 0b1);
-    writePin(LED_01, (layer >> 1) & 0b1);
+    gpio_write_pin(LED_00, layer & 0b1);
+    gpio_write_pin(LED_01, (layer >> 1) & 0b1);
     return layer_state_set_user(state);
 }
 
@@ -51,13 +51,13 @@ void matrix_init_kb(void) {
     // runs once when the firmware starts up
     uint8_t led_delay_ms = 80;
     for (int i = 0; i < 2; i++) {
-        writePinHigh(LED_00);
-        writePinHigh(LED_01);
-        writePinHigh(LED_02);
+        gpio_write_pin_high(LED_00);
+        gpio_write_pin_high(LED_01);
+        gpio_write_pin_high(LED_02);
         wait_ms(led_delay_ms);
-        writePinLow(LED_00);
-        writePinLow(LED_01);
-        writePinLow(LED_02);
+        gpio_write_pin_low(LED_00);
+        gpio_write_pin_low(LED_01);
+        gpio_write_pin_low(LED_02);
         if (i < 1) {
             wait_ms(led_delay_ms);
         }
@@ -69,7 +69,7 @@ void matrix_init_kb(void) {
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if(res) {
-        writePin(LED_02, !led_state.num_lock);
+        gpio_write_pin(LED_02, !led_state.num_lock);
     }
     return res;
 }

keyboards/dumbpad/v1x_dualencoder/v1x_dualencoder.c

@@ -17,9 +17,9 @@
 
 void keyboard_pre_init_kb(void) {
     // Set LED IO as outputs
-    setPinOutput(LED_00);
-    setPinOutput(LED_01);
-    setPinOutput(LED_02);
+    gpio_set_pin_output(LED_00);
+    gpio_set_pin_output(LED_01);
+    gpio_set_pin_output(LED_02);
     keyboard_pre_init_user();
 }
 
@@ -28,17 +28,17 @@ bool shutdown_kb(bool jump_to_bootloader) {
         return false;
     }
     // Shutdown LEDs
-    writePinLow(LED_00);
-    writePinLow(LED_01);
-    writePinLow(LED_02);
+    gpio_write_pin_low(LED_00);
+    gpio_write_pin_low(LED_01);
+    gpio_write_pin_low(LED_02);
     return true;
 }
 
 layer_state_t layer_state_set_kb(layer_state_t state) {
     // Layer LEDs act as binary indication of current layer
     uint8_t layer = get_highest_layer(state);
-    writePin(LED_00, layer & 0b1);
-    writePin(LED_01, (layer >> 1) & 0b1);
+    gpio_write_pin(LED_00, layer & 0b1);
+    gpio_write_pin(LED_01, (layer >> 1) & 0b1);
     return layer_state_set_user(state);
 }
 
@@ -51,13 +51,13 @@ void matrix_init_kb(void) {
     // runs once when the firmware starts up
     uint8_t led_delay_ms = 80;
     for (int i = 0; i < 2; i++) {
-        writePinHigh(LED_00);
-        writePinHigh(LED_01);
-        writePinHigh(LED_02);
+        gpio_write_pin_high(LED_00);
+        gpio_write_pin_high(LED_01);
+        gpio_write_pin_high(LED_02);
         wait_ms(led_delay_ms);
-        writePinLow(LED_00);
-        writePinLow(LED_01);
-        writePinLow(LED_02);
+        gpio_write_pin_low(LED_00);
+        gpio_write_pin_low(LED_01);
+        gpio_write_pin_low(LED_02);
         if (i < 1) {
             wait_ms(led_delay_ms);
         }
@@ -69,7 +69,7 @@ void matrix_init_kb(void) {
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if(res) {
-        writePin(LED_02, !led_state.num_lock);
+        gpio_write_pin(LED_02, !led_state.num_lock);
     }
     return res;
 }

keyboards/dumbpad/v1x_right/v1x_right.c

@@ -17,9 +17,9 @@
 
 void keyboard_pre_init_kb(void) {
     // Set LED IO as outputs
-    setPinOutput(LED_00);
-    setPinOutput(LED_01);
-    setPinOutput(LED_02);
+    gpio_set_pin_output(LED_00);
+    gpio_set_pin_output(LED_01);
+    gpio_set_pin_output(LED_02);
     keyboard_pre_init_user();
 }
 
@@ -28,17 +28,17 @@ bool shutdown_kb(bool jump_to_bootloader) {
         return false;
     }
     // Shutdown LEDs
-    writePinLow(LED_00);
-    writePinLow(LED_01);
-    writePinLow(LED_02);
+    gpio_write_pin_low(LED_00);
+    gpio_write_pin_low(LED_01);
+    gpio_write_pin_low(LED_02);
     return true;
 }
 
 layer_state_t layer_state_set_kb(layer_state_t state) {
     // Layer LEDs act as binary indication of current layer
     uint8_t layer = get_highest_layer(state);
-    writePin(LED_00, layer & 0b1);
-    writePin(LED_01, (layer >> 1) & 0b1);
+    gpio_write_pin(LED_00, layer & 0b1);
+    gpio_write_pin(LED_01, (layer >> 1) & 0b1);
     return layer_state_set_user(state);
 }
 
@@ -51,13 +51,13 @@ void matrix_init_kb(void) {
     // runs once when the firmware starts up
     uint8_t led_delay_ms = 80;
     for (int i = 0; i < 2; i++) {
-        writePinHigh(LED_00);
-        writePinHigh(LED_01);
-        writePinHigh(LED_02);
+        gpio_write_pin_high(LED_00);
+        gpio_write_pin_high(LED_01);
+        gpio_write_pin_high(LED_02);
         wait_ms(led_delay_ms);
-        writePinLow(LED_00);
-        writePinLow(LED_01);
-        writePinLow(LED_02);
+        gpio_write_pin_low(LED_00);
+        gpio_write_pin_low(LED_01);
+        gpio_write_pin_low(LED_02);
         if (i < 1) {
             wait_ms(led_delay_ms);
         }
@@ -69,7 +69,7 @@ void matrix_init_kb(void) {
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if(res) {
-        writePin(LED_02, !led_state.num_lock);
+        gpio_write_pin(LED_02, !led_state.num_lock);
     }
     return res;
 }

keyboards/dumbpad/v3x/v3x.c

@@ -48,9 +48,9 @@ led_config_t g_led_config = {{// Key Matrix to LED Index
 
 void keyboard_pre_init_kb(void) {
     // Set LED IO as outputs
-    setPinOutput(LED_00);
-    setPinOutput(LED_01);
-    setPinOutput(LED_02);
+    gpio_set_pin_output(LED_00);
+    gpio_set_pin_output(LED_01);
+    gpio_set_pin_output(LED_02);
     keyboard_pre_init_user();
 }
 
@@ -59,17 +59,17 @@ bool shutdown_kb(bool jump_to_bootloader) {
         return false;
     }
     // Shutdown LEDs
-    writePinLow(LED_00);
-    writePinLow(LED_01);
-    writePinLow(LED_02);
+    gpio_write_pin_low(LED_00);
+    gpio_write_pin_low(LED_01);
+    gpio_write_pin_low(LED_02);
     return true;
 }
 
 layer_state_t layer_state_set_kb(layer_state_t state) {
     // Layer LEDs act as binary indication of current layer
     uint8_t layer = get_highest_layer(state);
-    writePin(LED_00, layer & 0b1);
-    writePin(LED_01, (layer >> 1) & 0b1);
+    gpio_write_pin(LED_00, layer & 0b1);
+    gpio_write_pin(LED_01, (layer >> 1) & 0b1);
     uprintf("%d string", layer);
     return layer_state_set_user(state);
 }
@@ -83,13 +83,13 @@ void matrix_init_kb(void) {
     // runs once when the firmware starts up
     uint8_t led_delay_ms = 80;
     for (int i = 0; i < 2; i++) {
-        writePinHigh(LED_00);
-        writePinHigh(LED_01);
-        writePinHigh(LED_02);
+        gpio_write_pin_high(LED_00);
+        gpio_write_pin_high(LED_01);
+        gpio_write_pin_high(LED_02);
         wait_ms(led_delay_ms);
-        writePinLow(LED_00);
-        writePinLow(LED_01);
-        writePinLow(LED_02);
+        gpio_write_pin_low(LED_00);
+        gpio_write_pin_low(LED_01);
+        gpio_write_pin_low(LED_02);
         if (i < 1) {
             wait_ms(led_delay_ms);
         }
@@ -101,6 +101,6 @@ void matrix_init_kb(void) {
 bool led_update_kb(led_t led_state) {
     if (!led_update_user(led_state)) return false;
     // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-    writePin(LED_02, !led_state.num_lock);
+    gpio_write_pin(LED_02, !led_state.num_lock);
     return true;
 }

keyboards/durgod/dgk6x/dgk6x.c

@@ -18,22 +18,22 @@
 
 /* Private Functions */
 void off_all_leds(void) {
-    writePinHigh(LED_CAPS_LOCK_PIN);
-    writePinHigh(LED_WIN_LOCK_PIN);
-    writePinHigh(LED_MR_LOCK_PIN);
+    gpio_write_pin_high(LED_CAPS_LOCK_PIN);
+    gpio_write_pin_high(LED_WIN_LOCK_PIN);
+    gpio_write_pin_high(LED_MR_LOCK_PIN);
 }
 
 void on_all_leds(void) {
-    writePinLow(LED_CAPS_LOCK_PIN);
-    writePinLow(LED_WIN_LOCK_PIN);
-    writePinLow(LED_MR_LOCK_PIN);
+    gpio_write_pin_low(LED_CAPS_LOCK_PIN);
+    gpio_write_pin_low(LED_WIN_LOCK_PIN);
+    gpio_write_pin_low(LED_MR_LOCK_PIN);
 }
 
 /* WinLock and MR LEDs are non-standard. Need to override led init */
 void led_init_ports(void) {
-    setPinOutput(LED_CAPS_LOCK_PIN);
-    setPinOutput(LED_WIN_LOCK_PIN);
-    setPinOutput(LED_MR_LOCK_PIN);
+    gpio_set_pin_output(LED_CAPS_LOCK_PIN);
+    gpio_set_pin_output(LED_WIN_LOCK_PIN);
+    gpio_set_pin_output(LED_MR_LOCK_PIN);
     off_all_leds();
 }
 
@@ -44,7 +44,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
         case GU_TOGG:
             if (record->event.pressed) {
                 // Toggle LED on key press
-                togglePin(LED_WIN_LOCK_PIN);
+                gpio_toggle_pin(LED_WIN_LOCK_PIN);
             }
             break;
     }

keyboards/durgod/k310/k310.c

@@ -22,33 +22,33 @@
 /* Private Functions */
 void off_all_leds(void) {
 #ifdef LED_NUM_LOCK_PIN
-    writePinHigh(LED_NUM_LOCK_PIN);
+    gpio_write_pin_high(LED_NUM_LOCK_PIN);
 #endif
-    writePinHigh(LED_CAPS_LOCK_PIN);
-    writePinHigh(LED_SCROLL_LOCK_PIN);
-    writePinHigh(LED_WIN_LOCK_PIN);
-    writePinHigh(LED_MR_LOCK_PIN);
+    gpio_write_pin_high(LED_CAPS_LOCK_PIN);
+    gpio_write_pin_high(LED_SCROLL_LOCK_PIN);
+    gpio_write_pin_high(LED_WIN_LOCK_PIN);
+    gpio_write_pin_high(LED_MR_LOCK_PIN);
 }
 
 void on_all_leds(void) {
 #ifdef LED_NUM_LOCK_PIN
-    writePinLow(LED_NUM_LOCK_PIN);
+    gpio_write_pin_low(LED_NUM_LOCK_PIN);
 #endif
-    writePinLow(LED_CAPS_LOCK_PIN);
-    writePinLow(LED_SCROLL_LOCK_PIN);
-    writePinLow(LED_WIN_LOCK_PIN);
-    writePinLow(LED_MR_LOCK_PIN);
+    gpio_write_pin_low(LED_CAPS_LOCK_PIN);
+    gpio_write_pin_low(LED_SCROLL_LOCK_PIN);
+    gpio_write_pin_low(LED_WIN_LOCK_PIN);
+    gpio_write_pin_low(LED_MR_LOCK_PIN);
 }
 
 /* WinLock and MR LEDs are non-standard. Need to override led init */
 void led_init_ports(void) {
 #ifdef LED_NUM_LOCK_PIN
-    setPinOutput(LED_NUM_LOCK_PIN);
+    gpio_set_pin_output(LED_NUM_LOCK_PIN);
 #endif
-    setPinOutput(LED_CAPS_LOCK_PIN);
-    setPinOutput(LED_SCROLL_LOCK_PIN);
-    setPinOutput(LED_WIN_LOCK_PIN);
-    setPinOutput(LED_MR_LOCK_PIN);
+    gpio_set_pin_output(LED_CAPS_LOCK_PIN);
+    gpio_set_pin_output(LED_SCROLL_LOCK_PIN);
+    gpio_set_pin_output(LED_WIN_LOCK_PIN);
+    gpio_set_pin_output(LED_MR_LOCK_PIN);
     off_all_leds();
 }
 
@@ -58,7 +58,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
         case GU_TOGG:
             if (record->event.pressed) {
                 // Toggle LED on key press
-                togglePin(LED_WIN_LOCK_PIN);
+                gpio_toggle_pin(LED_WIN_LOCK_PIN);
             }
             break;
     }
@@ -75,7 +75,7 @@ static void hardware_reset_cb(void *arg) {
 #endif
 
 void keyboard_pre_init_kb(void) {
-    setPinInputHigh(HARDWARE_RESET_PIN);
+    gpio_set_pin_input_high(HARDWARE_RESET_PIN);
 
 #ifndef HW_RESET_PIN_DISABLED
     /* Jump to bootloader when the hardware reset button is pressed */
@@ -83,7 +83,7 @@ void keyboard_pre_init_kb(void) {
     palSetPadCallback(PAL_PORT(HARDWARE_RESET_PIN), PAL_PAD(HARDWARE_RESET_PIN), hardware_reset_cb, NULL);
 
     /* The interrupt is edge-triggered so check that it's not already pressed */
-    if (!readPin(HARDWARE_RESET_PIN)) {
+    if (!gpio_read_pin(HARDWARE_RESET_PIN)) {
         bootloader_jump();
     }
 #endif

keyboards/durgod/k320/k320.c

@@ -22,33 +22,33 @@
 /* Private Functions */
 void off_all_leds(void) {
 #ifdef LED_NUM_LOCK_PIN
-    writePinHigh(LED_NUM_LOCK_PIN);
+    gpio_write_pin_high(LED_NUM_LOCK_PIN);
 #endif
-    writePinHigh(LED_CAPS_LOCK_PIN);
-    writePinHigh(LED_SCROLL_LOCK_PIN);
-    writePinHigh(LED_WIN_LOCK_PIN);
-    writePinHigh(LED_MR_LOCK_PIN);
+    gpio_write_pin_high(LED_CAPS_LOCK_PIN);
+    gpio_write_pin_high(LED_SCROLL_LOCK_PIN);
+    gpio_write_pin_high(LED_WIN_LOCK_PIN);
+    gpio_write_pin_high(LED_MR_LOCK_PIN);
 }
 
 void on_all_leds(void) {
 #ifdef LED_NUM_LOCK_PIN
-    writePinLow(LED_NUM_LOCK_PIN);
+    gpio_write_pin_low(LED_NUM_LOCK_PIN);
 #endif
-    writePinLow(LED_CAPS_LOCK_PIN);
-    writePinLow(LED_SCROLL_LOCK_PIN);
-    writePinLow(LED_WIN_LOCK_PIN);
-    writePinLow(LED_MR_LOCK_PIN);
+    gpio_write_pin_low(LED_CAPS_LOCK_PIN);
+    gpio_write_pin_low(LED_SCROLL_LOCK_PIN);
+    gpio_write_pin_low(LED_WIN_LOCK_PIN);
+    gpio_write_pin_low(LED_MR_LOCK_PIN);
 }
 
 /* WinLock and MR LEDs are non-standard. Need to override led init */
 void led_init_ports(void) {
 #ifdef LED_NUM_LOCK_PIN
-    setPinOutput(LED_NUM_LOCK_PIN);
+    gpio_set_pin_output(LED_NUM_LOCK_PIN);
 #endif
-    setPinOutput(LED_CAPS_LOCK_PIN);
-    setPinOutput(LED_SCROLL_LOCK_PIN);
-    setPinOutput(LED_WIN_LOCK_PIN);
-    setPinOutput(LED_MR_LOCK_PIN);
+    gpio_set_pin_output(LED_CAPS_LOCK_PIN);
+    gpio_set_pin_output(LED_SCROLL_LOCK_PIN);
+    gpio_set_pin_output(LED_WIN_LOCK_PIN);
+    gpio_set_pin_output(LED_MR_LOCK_PIN);
     off_all_leds();
 }
 
@@ -58,7 +58,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
         case GU_TOGG:
             if (record->event.pressed) {
                 // Toggle LED on key press
-                togglePin(LED_WIN_LOCK_PIN);
+                gpio_toggle_pin(LED_WIN_LOCK_PIN);
             }
             break;
     }
@@ -75,7 +75,7 @@ static void hardware_reset_cb(void *arg) {
 #endif
 
 void keyboard_pre_init_kb(void) {
-    setPinInputHigh(HARDWARE_RESET_PIN);
+    gpio_set_pin_input_high(HARDWARE_RESET_PIN);
 
 #ifndef HW_RESET_PIN_DISABLED
     /* Jump to bootloader when the hardware reset button is pressed */
@@ -83,7 +83,7 @@ void keyboard_pre_init_kb(void) {
     palSetPadCallback(PAL_PORT(HARDWARE_RESET_PIN), PAL_PAD(HARDWARE_RESET_PIN), hardware_reset_cb, NULL);
 
     /* The interrupt is edge-triggered so check that it's not already pressed */
-    if (!readPin(HARDWARE_RESET_PIN)) {
+    if (!gpio_read_pin(HARDWARE_RESET_PIN)) {
         bootloader_jump();
     }
 #endif

keyboards/dztech/bocc/bocc.c

@@ -16,14 +16,14 @@
 #include "quantum.h"
 
 void matrix_init_kb(void) {
-    setPinOutput(E6);
+    gpio_set_pin_output(E6);
     matrix_init_user();
 }
 
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if(res) {
-        writePin(E6, !led_state.caps_lock);
+        gpio_write_pin(E6, !led_state.caps_lock);
     }
     return res;
 }

keyboards/ealdin/quadrant/quadrant.c

@@ -54,14 +54,14 @@ bool encoder_update_kb(uint8_t index, bool clockwise) {
 }
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(F0);
+    gpio_set_pin_output(F0);
 
     keyboard_pre_init_user();
 }
 
 bool led_update_kb(led_t led_state) {
     if (led_update_user(led_state)) {
-        writePin(F0, led_state.caps_lock);
+        gpio_write_pin(F0, led_state.caps_lock);
     }
     return true;
 }

keyboards/edda/edda.c

@@ -18,32 +18,32 @@ void keyboard_pre_init_kb(void) {
   keyboard_pre_init_user();
 
   // Set our LED pins as output
-  setPinOutput(B2);
-  setPinOutput(B1);
-  setPinOutput(B0);
+  gpio_set_pin_output(B2);
+  gpio_set_pin_output(B1);
+  gpio_set_pin_output(B0);
 }
 
 __attribute__((weak)) layer_state_t layer_state_set_user(layer_state_t state) {
     switch (get_highest_layer(state)) {
     case 1:
-        writePin(B2, 1);
-        writePin(B1, 0);
-        writePin(B0, 0);
+        gpio_write_pin(B2, 1);
+        gpio_write_pin(B1, 0);
+        gpio_write_pin(B0, 0);
         break;
     case 2:
-        writePin(B2, 1);
-        writePin(B1, 1);
-        writePin(B0, 0);
+        gpio_write_pin(B2, 1);
+        gpio_write_pin(B1, 1);
+        gpio_write_pin(B0, 0);
         break;
     case 3:
-        writePin(B2, 1);
-        writePin(B1, 1);
-        writePin(B0, 1);
+        gpio_write_pin(B2, 1);
+        gpio_write_pin(B1, 1);
+        gpio_write_pin(B0, 1);
         break;
     default: //  for any other layers, or the default layer
-        writePin(B2, 0);
-        writePin(B1, 0);
-        writePin(B0, 0);
+        gpio_write_pin(B2, 0);
+        gpio_write_pin(B1, 0);
+        gpio_write_pin(B0, 0);
         break;
     }
   return state;

keyboards/enviousdesign/commissions/mini1800/mini1800.c

@@ -3,15 +3,15 @@
 #include "quantum.h"
 
 void matrix_init_user(void) {
-  setPinOutput(GP9); //init gpio
-  writePinLow(GP9);
-  setPinOutput(GP11); //init and turn off inverted power led
-  writePinHigh(GP11);
+  gpio_set_pin_output(GP9); //init gpio
+  gpio_write_pin_low(GP9);
+  gpio_set_pin_output(GP11); //init and turn off inverted power led
+  gpio_write_pin_high(GP11);
 }
 
 //layer, capslock and numlock
 layer_state_t layer_state_set_user(layer_state_t state) {
-	writePin(GP9, layer_state_cmp(state, 1));
+	gpio_write_pin(GP9, layer_state_cmp(state, 1));
     return state;
 }
 

keyboards/ergodox_ez/matrix.c

@@ -130,12 +130,12 @@ static void init_cols(void) {
     // not needed, already done as part of init_mcp23018()
 
     // init on teensy
-    setPinInputHigh(F0);
-    setPinInputHigh(F1);
-    setPinInputHigh(F4);
-    setPinInputHigh(F5);
-    setPinInputHigh(F6);
-    setPinInputHigh(F7);
+    gpio_set_pin_input_high(F0);
+    gpio_set_pin_input_high(F1);
+    gpio_set_pin_input_high(F4);
+    gpio_set_pin_input_high(F5);
+    gpio_set_pin_input_high(F6);
+    gpio_set_pin_input_high(F7);
 }
 
 static matrix_row_t read_cols(uint8_t row) {
@@ -176,13 +176,13 @@ static void unselect_rows(void) {
     // direction
 
     // unselect on teensy
-    setPinInput(B0);
-    setPinInput(B1);
-    setPinInput(B2);
-    setPinInput(B3);
-    setPinInput(D2);
-    setPinInput(D3);
-    setPinInput(C6);
+    gpio_set_pin_input(B0);
+    gpio_set_pin_input(B1);
+    gpio_set_pin_input(B2);
+    gpio_set_pin_input(B3);
+    gpio_set_pin_input(D2);
+    gpio_set_pin_input(D3);
+    gpio_set_pin_input(C6);
 }
 
 static void select_row(uint8_t row) {
@@ -200,32 +200,32 @@ static void select_row(uint8_t row) {
         // Output low(DDR:1, PORT:0) to select
         switch (row) {
             case 7:
-                setPinOutput(B0);
-                writePinLow(B0);
+                gpio_set_pin_output(B0);
+                gpio_write_pin_low(B0);
                 break;
             case 8:
-                setPinOutput(B1);
-                writePinLow(B1);
+                gpio_set_pin_output(B1);
+                gpio_write_pin_low(B1);
                 break;
             case 9:
-                setPinOutput(B2);
-                writePinLow(B2);
+                gpio_set_pin_output(B2);
+                gpio_write_pin_low(B2);
                 break;
             case 10:
-                setPinOutput(B3);
-                writePinLow(B3);
+                gpio_set_pin_output(B3);
+                gpio_write_pin_low(B3);
                 break;
             case 11:
-                setPinOutput(D2);
-                writePinLow(D2);
+                gpio_set_pin_output(D2);
+                gpio_write_pin_low(D2);
                 break;
             case 12:
-                setPinOutput(D3);
-                writePinLow(D3);
+                gpio_set_pin_output(D3);
+                gpio_write_pin_low(D3);
                 break;
             case 13:
-                setPinOutput(C6);
-                writePinLow(C6);
+                gpio_set_pin_output(C6);
+                gpio_write_pin_low(C6);
                 break;
         }
     }

keyboards/evyd13/gh80_3700/gh80_3700.c

@@ -16,22 +16,22 @@
 #include "quantum.h"
 
 void led_init_ports(void) {
-  setPinOutput(E6);
-  setPinOutput(B1);
-  setPinOutput(D0);
-  setPinOutput(D1);
-  setPinOutput(F0);
+  gpio_set_pin_output(E6);
+  gpio_set_pin_output(B1);
+  gpio_set_pin_output(D0);
+  gpio_set_pin_output(D1);
+  gpio_set_pin_output(F0);
   
-  writePinHigh(E6);
-  writePinHigh(B1);
-  writePinHigh(D0);
-  writePinHigh(D1);
-  writePinHigh(F0);
+  gpio_write_pin_high(E6);
+  gpio_write_pin_high(B1);
+  gpio_write_pin_high(D0);
+  gpio_write_pin_high(D1);
+  gpio_write_pin_high(F0);
 }
 
 bool led_update_kb(led_t led_state) {
   if(led_update_user(led_state)) {
-    writePin(E6, !led_state.num_lock);
+    gpio_write_pin(E6, !led_state.num_lock);
   }
 
   return true;

keyboards/evyd13/gud70/gud70.c

@@ -17,6 +17,6 @@
 
 void keyboard_pre_init_kb(void) {
   // Enable top LED
-  setPinOutput(B3);
-  writePinLow(B3);
+  gpio_set_pin_output(B3);
+  gpio_write_pin_low(B3);
 }

keyboards/evyd13/pockettype/pockettype.c

@@ -17,20 +17,20 @@
 
 void led_init_ports(void) {
     // * Enable LED anodes (Vbus pin is replaced by B0 on some boards)
-    setPinOutput(B0);
-    writePinHigh(B0);
+    gpio_set_pin_output(B0);
+    gpio_write_pin_high(B0);
 
     // * Set our LED pins as output and high
-    setPinOutput(F5);
-    writePinHigh(F5);
+    gpio_set_pin_output(F5);
+    gpio_write_pin_high(F5);
     
-    setPinOutput(F4);
-    writePinLow(F4);
+    gpio_set_pin_output(F4);
+    gpio_write_pin_low(F4);
 }
 
 bool led_update_kb(led_t led_state) {
     if(led_update_user(led_state)) {
-        writePin(F5, !led_state.caps_lock);
+        gpio_write_pin(F5, !led_state.caps_lock);
     }
 
     return true;

keyboards/evyd13/wasdat/matrix.c

@@ -46,7 +46,7 @@ static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
  */
 static void select_col(uint8_t col) {
     if (col_pins[col] != NO_PIN) {
-        writePinLow(col_pins[col]);
+        gpio_write_pin_low(col_pins[col]);
     } else {
         sn74x138_set_addr(13 - col);
     }
@@ -54,8 +54,8 @@ static void select_col(uint8_t col) {
 
 static void unselect_col(uint8_t col) {
     if (col_pins[col] != NO_PIN) {
-        setPinOutput(col_pins[col]);
-        writePinHigh(col_pins[col]);
+        gpio_set_pin_output(col_pins[col]);
+        gpio_write_pin_high(col_pins[col]);
     } else {
         sn74x138_set_addr(0);
     }
@@ -65,8 +65,8 @@ static void unselect_cols(void) {
     // Native
     for (uint8_t x = 0; x < MATRIX_COLS; x++) {
         if (col_pins[x] != NO_PIN) {
-            setPinOutput(col_pins[x]);
-            writePinHigh(col_pins[x]);
+            gpio_set_pin_output(col_pins[x]);
+            gpio_write_pin_high(col_pins[x]);
         }
     }
 
@@ -77,7 +77,7 @@ static void unselect_cols(void) {
 static void init_pins(void) {
     unselect_cols();
     for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
-        setPinInputHigh(row_pins[x]);
+        gpio_set_pin_input_high(row_pins[x]);
     }
 }
 
@@ -94,7 +94,7 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
         matrix_row_t last_row_value = current_matrix[row_index];
 
         // Check row pin state
-        if (readPin(row_pins[row_index]) == 0) {
+        if (gpio_read_pin(row_pins[row_index]) == 0) {
             // Pin LO, set col bit
             current_matrix[row_index] |= (MATRIX_ROW_SHIFTER << current_col);
         } else {

keyboards/evyd13/wasdat_code/matrix.c

@@ -48,7 +48,7 @@ static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
  */
 static void select_col(uint8_t col) {
     if (col_pins[col] != NO_PIN) {
-        writePinLow(col_pins[col]);
+        gpio_write_pin_low(col_pins[col]);
     } else {
         sn74x138_set_addr((col == 6) ? 7 : 15 - col);
         sn74x138_set_enabled(true);
@@ -57,8 +57,8 @@ static void select_col(uint8_t col) {
 
 static void unselect_col(uint8_t col) {
     if (col_pins[col] != NO_PIN) {
-        setPinOutput(col_pins[col]);
-        writePinHigh(col_pins[col]);
+        gpio_set_pin_output(col_pins[col]);
+        gpio_write_pin_high(col_pins[col]);
     } else {
         sn74x138_set_enabled(false);
     }
@@ -68,8 +68,8 @@ static void unselect_cols(void) {
     // Native
     for (uint8_t x = 0; x < MATRIX_COLS; x++) {
         if (col_pins[x] != NO_PIN) {
-            setPinOutput(col_pins[x]);
-            writePinHigh(col_pins[x]);
+            gpio_set_pin_output(col_pins[x]);
+            gpio_write_pin_high(col_pins[x]);
         }
     }
 
@@ -80,7 +80,7 @@ static void unselect_cols(void) {
 static void init_pins(void) {
     unselect_cols();
     for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
-        setPinInputHigh(row_pins[x]);
+        gpio_set_pin_input_high(row_pins[x]);
     }
 }
 
@@ -97,7 +97,7 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
         matrix_row_t last_row_value = current_matrix[row_index];
 
         // Check row pin state
-        if (readPin(row_pins[row_index]) == 0) {
+        if (gpio_read_pin(row_pins[row_index]) == 0) {
             // Pin LO, set col bit
             current_matrix[row_index] |= (MATRIX_ROW_SHIFTER << current_col);
         } else {

keyboards/exclusive/e6v2/oe/oe.c

@@ -1,15 +1,15 @@
 #include "quantum.h"
 
 void led_init_ports(void) {
-    setPinOutput(B2);
-    setPinOutput(B6);
+    gpio_set_pin_output(B2);
+    gpio_set_pin_output(B6);
 }
 
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if(res) {
-        writePin(B2, !led_state.caps_lock);
-        writePin(B6, led_state.raw == 0);
+        gpio_write_pin(B2, !led_state.caps_lock);
+        gpio_write_pin(B6, led_state.raw == 0);
     }
     return res;
 }

keyboards/exclusive/e85/hotswap/hotswap.c

@@ -17,16 +17,16 @@
 #include "quantum.h"
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(C7);
-    setPinOutput(B5);
+    gpio_set_pin_output(C7);
+    gpio_set_pin_output(B5);
 
     keyboard_pre_init_user();
 }
 
 bool led_update_kb(led_t led_state) {
     if (led_update_user(led_state)) {
-        writePin(C7, led_state.caps_lock);
-        writePin(B5, led_state.scroll_lock);
+        gpio_write_pin(C7, led_state.caps_lock);
+        gpio_write_pin(B5, led_state.scroll_lock);
     }
     return true;
 }

keyboards/exclusive/e85/soldered/soldered.c

@@ -17,16 +17,16 @@
 #include "quantum.h"
 
 void keyboard_pre_init_kb(void) {
-    setPinOutput(C7);
-    setPinOutput(B5);
+    gpio_set_pin_output(C7);
+    gpio_set_pin_output(B5);
 
     keyboard_pre_init_user();
 }
 
 bool led_update_kb(led_t led_state) {
     if (led_update_user(led_state)) {
-        writePin(C7, led_state.caps_lock);
-        writePin(B5, led_state.scroll_lock);
+        gpio_write_pin(C7, led_state.caps_lock);
+        gpio_write_pin(B5, led_state.scroll_lock);
     }
     return true;
 }

keyboards/ferris/0_1/matrix.c

@@ -182,8 +182,8 @@ static void init_cols(void) {
     pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_MCU;
     for (int pin_index = 0; pin_index < MATRIX_COLS_PER_SIDE; pin_index++) {
         pin_t pin = matrix_col_pins_mcu[pin_index];
-        setPinInput(pin);
-        writePinHigh(pin);
+        gpio_set_pin_input(pin);
+        gpio_write_pin_high(pin);
     }
 }
 
@@ -194,7 +194,7 @@ static matrix_row_t read_cols(uint8_t row) {
         // For each col...
         for (uint8_t col_index = 0; col_index < MATRIX_COLS_PER_SIDE; col_index++) {
             // Select the col pin to read (active low)
-            uint8_t pin_state = readPin(matrix_col_pins_mcu[col_index]);
+            uint8_t pin_state = gpio_read_pin(matrix_col_pins_mcu[col_index]);
 
             // Populate the matrix row with the state of the col pin
             current_row_value |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index);
@@ -229,8 +229,8 @@ static void unselect_rows(void) {
     pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_MCU;
     for (int pin_index = 0; pin_index < MATRIX_ROWS_PER_SIDE; pin_index++) {
         pin_t pin = matrix_row_pins_mcu[pin_index];
-        setPinInput(pin);
-        writePinLow(pin);
+        gpio_set_pin_input(pin);
+        gpio_write_pin_low(pin);
     }
 }
 
@@ -239,8 +239,8 @@ static void select_row(uint8_t row) {
         // select on atmega32u4
         pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_MCU;
         pin_t pin                                       = matrix_row_pins_mcu[row];
-        setPinOutput(pin);
-        writePinLow(pin);
+        gpio_set_pin_output(pin);
+        gpio_write_pin_low(pin);
     } else {
         // select on mcp23017
         if (mcp23017_status) {  // if there was an error

keyboards/ferris/0_2/matrix.c

@@ -173,7 +173,7 @@ static matrix_row_t read_cols(uint8_t row) {
         // For each col...
         for (uint8_t col_index = 0; col_index < MATRIX_COLS_PER_SIDE; col_index++) {
             // Select the col pin to read (active low)
-            uint8_t pin_state = readPin(matrix_col_pins_mcu[col_index]);
+            uint8_t pin_state = gpio_read_pin(matrix_col_pins_mcu[col_index]);
 
             // Populate the matrix row with the state of the col pin
             current_row_value |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index);
@@ -199,7 +199,7 @@ static matrix_row_t read_cols(uint8_t row) {
 
 static void unselect_row(uint8_t row) {
     pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_MCU;
-    setPinInputHigh(matrix_row_pins_mcu[row]);
+    gpio_set_pin_input_high(matrix_row_pins_mcu[row]);
 }
 
 static void unselect_rows(void) {
@@ -211,14 +211,14 @@ static void unselect_rows(void) {
     pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_MCU;
     for (int pin_index = 0; pin_index < MATRIX_ROWS_PER_SIDE; pin_index++) {
         pin_t pin = matrix_row_pins_mcu[pin_index];
-        setPinInputHigh(pin);
+        gpio_set_pin_input_high(pin);
     }
 }
 static void unselect_cols(void) {
     pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_MCU;
     for (int pin_index = 0; pin_index < MATRIX_COLS_PER_SIDE; pin_index++) {
         pin_t pin = matrix_col_pins_mcu[pin_index];
-        setPinInputHigh(pin);
+        gpio_set_pin_input_high(pin);
     }
 }
 
@@ -227,8 +227,8 @@ static void select_row(uint8_t row) {
         // select on MCU
         pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_MCU;
         pin_t pin                                       = matrix_row_pins_mcu[row];
-        setPinOutput(pin);
-        writePinLow(pin);
+        gpio_set_pin_output(pin);
+        gpio_write_pin_low(pin);
     } else {
         // select on mcp23017
         if (mcp23017_status) {  // if there was an error

keyboards/fjlabs/bolsa65/bolsa65.c

@@ -15,14 +15,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 void matrix_init_kb(void) {
     // Initialize indicator LEDs to output
-    setPinOutput(F7); // Caps
+    gpio_set_pin_output(F7); // Caps
     matrix_init_user();
 }
 
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if(res) {
-        writePin(F7, led_state.caps_lock);
+        gpio_write_pin(F7, led_state.caps_lock);
     }
     return res;
 }

keyboards/flx/virgo/virgo.c

@@ -20,15 +20,15 @@ void matrix_init_kb(void) {
     // put your keyboard start-up code here
     // runs once when the firmware starts up
 
-  setPinOutput(E6);
-  setPinOutput(B2);
+  gpio_set_pin_output(E6);
+  gpio_set_pin_output(B2);
   matrix_init_user();
 }
 
 bool led_update_kb(led_t led_state) {
     if(led_update_user(led_state)) {
-        writePin(E6, !led_state.caps_lock);
-        writePin(B2, !led_state.scroll_lock);
+        gpio_write_pin(E6, !led_state.caps_lock);
+        gpio_write_pin(B2, !led_state.scroll_lock);
     }
     return true;
 }

keyboards/gboards/gergoplex/matrix.c

@@ -168,7 +168,7 @@ void matrix_print(void) {
 // Remember this means ROWS
 static void init_cols(void) {
     for (uint8_t col = 0; col < MATRIX_COLS; col++) {
-      setPinInputHigh(col_pins[col]);
+      gpio_set_pin_input_high(col_pins[col]);
     }
 }
 
@@ -195,8 +195,8 @@ static void unselect_rows(void) {
     // the other row bits high, and it's not changing to a different direction
 
     for (uint8_t row = 0; row < MATRIX_ROWS_PER_SIDE; row++) {
-      setPinInput(row_pins[row]);
-      writePinLow(row_pins[row]);
+      gpio_set_pin_input(row_pins[row]);
+      gpio_write_pin_low(row_pins[row]);
     }
 }
 
@@ -211,7 +211,7 @@ static void select_row(uint8_t row) {
 
         }
     } else {
-        setPinOutput(row_pins[row - MATRIX_ROWS_PER_SIDE]);
-        writePinLow(row_pins[row - MATRIX_ROWS_PER_SIDE]);
+        gpio_set_pin_output(row_pins[row - MATRIX_ROWS_PER_SIDE]);
+        gpio_write_pin_low(row_pins[row - MATRIX_ROWS_PER_SIDE]);
     }
 }