[CI] Format code according to conventions (#25827)

Format code according to conventions

drivers/bluetooth/bluefruit_le.cpp

@@ -364,7 +364,7 @@ static bool read_response(char *resp, uint16_t resplen, bool verbose) {
 }
 
 static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout) {
-    const char *    end = cmd + strlen(cmd);
+    const char     *end = cmd + strlen(cmd);
     struct sdep_msg msg;
 
     if (verbose) {

drivers/eeprom/eeprom_i2c.c

@@ -104,7 +104,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
 
 void eeprom_write_block(const void *buf, void *addr, size_t len) {
     uint8_t   complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + EXTERNAL_EEPROM_PAGE_SIZE];
-    uint8_t * read_buf    = (uint8_t *)buf;
+    uint8_t  *read_buf    = (uint8_t *)buf;
     uintptr_t target_addr = (uintptr_t)addr;
 
 #if defined(EXTERNAL_EEPROM_WP_PIN)

drivers/eeprom/eeprom_spi.c

@@ -154,7 +154,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
 
 void eeprom_write_block(const void *buf, void *addr, size_t len) {
     bool      res;
-    uint8_t * read_buf    = (uint8_t *)buf;
+    uint8_t  *read_buf    = (uint8_t *)buf;
     uintptr_t target_addr = (uintptr_t)addr;
 
     while (len > 0) {

drivers/encoder/encoder_quadrature.c

@@ -113,7 +113,7 @@ void encoder_driver_init(void) {
     thisCount = isLeftHand ? NUM_ENCODERS_LEFT : NUM_ENCODERS_RIGHT;
     thatCount = isLeftHand ? NUM_ENCODERS_RIGHT : NUM_ENCODERS_LEFT;
 #else // SPLIT_KEYBOARD
-    thisCount                = NUM_ENCODERS;
+    thisCount = NUM_ENCODERS;
 #endif
 
 #ifdef ENCODER_TESTS

drivers/flash/flash_spi.c

@@ -291,7 +291,7 @@ flash_status_t flash_erase_block(uint32_t addr) {
 
 flash_status_t flash_read_range(uint32_t addr, void *buf, size_t len) {
     flash_status_t response = FLASH_STATUS_SUCCESS;
-    uint8_t *      read_buf = (uint8_t *)buf;
+    uint8_t       *read_buf = (uint8_t *)buf;
 
     /* Wait for the write-in-progress bit to be cleared. */
     response = spi_flash_wait_while_busy();
@@ -322,7 +322,7 @@ flash_status_t flash_read_range(uint32_t addr, void *buf, size_t len) {
 
 flash_status_t flash_write_range(uint32_t addr, const void *buf, size_t len) {
     flash_status_t response  = FLASH_STATUS_SUCCESS;
-    uint8_t *      write_buf = (uint8_t *)buf;
+    uint8_t       *write_buf = (uint8_t *)buf;
 
     while (len > 0) {
         uint32_t page_offset  = addr % EXTERNAL_FLASH_PAGE_SIZE;

drivers/haptic/solenoid.h

@@ -47,8 +47,7 @@
 
 #ifndef SOLENOID_PINS
 #    ifdef SOLENOID_PIN
-#        define SOLENOID_PINS \
-            { SOLENOID_PIN }
+#        define SOLENOID_PINS {SOLENOID_PIN}
 #    else
 #        error SOLENOID_PINS array not defined
 #    endif

drivers/lcd/st7565.c

@@ -70,7 +70,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // parts of the display unusable or don't get cleared correctly
 // and also allows for drawing & inverting
 uint8_t            st7565_buffer[ST7565_MATRIX_SIZE];
-uint8_t *          st7565_cursor;
+uint8_t           *st7565_cursor;
 ST7565_BLOCK_TYPE  st7565_dirty       = 0;
 bool               st7565_initialized = false;
 bool               st7565_active      = false;

drivers/led/snled27351-mono.c

@@ -34,8 +34,7 @@
 #endif
 
 #ifndef SNLED27351_CURRENT_TUNE
-#    define SNLED27351_CURRENT_TUNE \
-        { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }
+#    define SNLED27351_CURRENT_TUNE {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}
 #endif
 
 const uint8_t i2c_addresses[SNLED27351_DRIVER_COUNT] = {

drivers/led/snled27351.c

@@ -34,8 +34,7 @@
 #endif
 
 #ifndef SNLED27351_CURRENT_TUNE
-#    define SNLED27351_CURRENT_TUNE \
-        { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }
+#    define SNLED27351_CURRENT_TUNE {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}
 #endif
 
 const uint8_t i2c_addresses[SNLED27351_DRIVER_COUNT] = {

drivers/oled/oled_driver.c

@@ -146,7 +146,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // parts of the display unusable or don't get cleared correctly
 // and also allows for drawing & inverting
 uint8_t         oled_buffer[OLED_MATRIX_SIZE];
-uint8_t *       oled_cursor;
+uint8_t        *oled_cursor;
 OLED_BLOCK_TYPE oled_dirty          = 0;
 bool            oled_initialized    = false;
 bool            oled_active         = false;
@@ -301,24 +301,18 @@ bool oled_init(oled_rotation_t rotation) {
     oled_driver_init();
 
     static const uint8_t PROGMEM display_setup1[] = {
-        I2C_CMD,
-        DISPLAY_OFF,
-        DISPLAY_CLOCK,
-        OLED_DISPLAY_CLOCK,
-        MULTIPLEX_RATIO,
+        I2C_CMD, DISPLAY_OFF, DISPLAY_CLOCK, OLED_DISPLAY_CLOCK, MULTIPLEX_RATIO,
 #if OLED_IC_COM_PINS_ARE_COLUMNS
         OLED_DISPLAY_WIDTH - 1,
 #else
         OLED_DISPLAY_HEIGHT - 1,
 #endif
 #if OLED_IC == OLED_IC_SH1107
-        SH1107_DISPLAY_START_LINE,
-        0x00,
+        SH1107_DISPLAY_START_LINE, 0x00,
 #else
         DISPLAY_START_LINE | 0x00,
 #endif
-        CHARGE_PUMP,
-        0x14,
+        CHARGE_PUMP, 0x14,
 #if OLED_IC_HAS_HORIZONTAL_MODE
         // MEMORY_MODE is unsupported on SH1106 (Page Addressing only)
         MEMORY_MODE,

drivers/oled/oled_driver.h

@@ -53,12 +53,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
 // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
 #    ifndef OLED_SOURCE_MAP
-#        define OLED_SOURCE_MAP \
-            { 0, 8, 16, 24, 32, 40, 48, 56 }
+#        define OLED_SOURCE_MAP {0, 8, 16, 24, 32, 40, 48, 56}
 #    endif
 #    ifndef OLED_TARGET_MAP
-#        define OLED_TARGET_MAP \
-            { 56, 48, 40, 32, 24, 16, 8, 0 }
+#        define OLED_TARGET_MAP {56, 48, 40, 32, 24, 16, 8, 0}
 #    endif
 // If OLED_BLOCK_TYPE is uint32_t, these tables would look like:
 // #define OLED_SOURCE_MAP { 32, 40, 48, 56 }
@@ -97,12 +95,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    endif
 
 #    ifndef OLED_SOURCE_MAP
-#        define OLED_SOURCE_MAP \
-            { 0, 8, 16, 24 }
+#        define OLED_SOURCE_MAP {0, 8, 16, 24}
 #    endif
 #    ifndef OLED_TARGET_MAP
-#        define OLED_TARGET_MAP \
-            { 24, 16, 8, 0 }
+#        define OLED_TARGET_MAP {24, 16, 8, 0}
 #    endif
 
 #elif defined(OLED_DISPLAY_64X48)
@@ -132,12 +128,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    endif
 
 #    ifndef OLED_SOURCE_MAP
-#        define OLED_SOURCE_MAP \
-            { 0, 8 }
+#        define OLED_SOURCE_MAP {0, 8}
 #    endif
 #    ifndef OLED_TARGET_MAP
-#        define OLED_TARGET_MAP \
-            { 8, 0 }
+#        define OLED_TARGET_MAP {8, 0}
 #    endif
 
 #elif defined(OLED_DISPLAY_64X128)
@@ -170,12 +164,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    endif
 
 #    ifndef OLED_SOURCE_MAP
-#        define OLED_SOURCE_MAP \
-            { 0, 8, 16, 24, 32, 40, 48, 56 }
+#        define OLED_SOURCE_MAP {0, 8, 16, 24, 32, 40, 48, 56}
 #    endif
 #    ifndef OLED_TARGET_MAP
-#        define OLED_TARGET_MAP \
-            { 56, 48, 40, 32, 24, 16, 8, 0 }
+#        define OLED_TARGET_MAP {56, 48, 40, 32, 24, 16, 8, 0}
 #    endif
 
 #elif defined(OLED_DISPLAY_128X128)
@@ -208,12 +200,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
 // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
 #    ifndef OLED_SOURCE_MAP
-#        define OLED_SOURCE_MAP \
-            { 0, 8, 16, 24, 32, 40, 48, 56 }
+#        define OLED_SOURCE_MAP {0, 8, 16, 24, 32, 40, 48, 56}
 #    endif
 #    ifndef OLED_TARGET_MAP
-#        define OLED_TARGET_MAP \
-            { 56, 48, 40, 32, 24, 16, 8, 0 }
+#        define OLED_TARGET_MAP {56, 48, 40, 32, 24, 16, 8, 0}
 #    endif
 #else // defined(OLED_DISPLAY_128X64)
 // Default 128x32
@@ -242,12 +232,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
 // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
 #    ifndef OLED_SOURCE_MAP
-#        define OLED_SOURCE_MAP \
-            { 0, 8, 16, 24 }
+#        define OLED_SOURCE_MAP {0, 8, 16, 24}
 #    endif
 #    ifndef OLED_TARGET_MAP
-#        define OLED_TARGET_MAP \
-            { 24, 16, 8, 0 }
+#        define OLED_TARGET_MAP {24, 16, 8, 0}
 #    endif
 // If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
 // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }

drivers/painter/comms/qp_comms_i2c.c

@@ -10,7 +10,7 @@
 // Helpers
 
 static uint32_t qp_comms_i2c_send_raw(painter_device_t device, const void *data, uint32_t byte_count) {
-    painter_driver_t *     driver       = (painter_driver_t *)device;
+    painter_driver_t      *driver       = (painter_driver_t *)device;
     qp_comms_i2c_config_t *comms_config = (qp_comms_i2c_config_t *)driver->comms_config;
     i2c_status_t           res          = i2c_transmit(comms_config->chip_address << 1, data, byte_count, I2C_TIMEOUT);
     if (res < 0) {

drivers/painter/comms/qp_comms_spi.c

@@ -10,7 +10,7 @@
 // Base SPI support
 
 bool qp_comms_spi_init(painter_device_t device) {
-    painter_driver_t *     driver       = (painter_driver_t *)device;
+    painter_driver_t      *driver       = (painter_driver_t *)device;
     qp_comms_spi_config_t *comms_config = (qp_comms_spi_config_t *)driver->comms_config;
 
     // Initialize the SPI peripheral
@@ -24,7 +24,7 @@ bool qp_comms_spi_init(painter_device_t device) {
 }
 
 bool qp_comms_spi_start(painter_device_t device) {
-    painter_driver_t *     driver       = (painter_driver_t *)device;
+    painter_driver_t      *driver       = (painter_driver_t *)device;
     qp_comms_spi_config_t *comms_config = (qp_comms_spi_config_t *)driver->comms_config;
 
     return spi_start(comms_config->chip_select_pin, comms_config->lsb_first, comms_config->mode, comms_config->divisor);
@@ -46,7 +46,7 @@ uint32_t qp_comms_spi_send_data(painter_device_t device, const void *data, uint3
 }
 
 bool qp_comms_spi_stop(painter_device_t device) {
-    painter_driver_t *     driver       = (painter_driver_t *)device;
+    painter_driver_t      *driver       = (painter_driver_t *)device;
     qp_comms_spi_config_t *comms_config = (qp_comms_spi_config_t *)driver->comms_config;
     spi_stop();
     gpio_write_pin_high(comms_config->chip_select_pin);
@@ -70,7 +70,7 @@ bool qp_comms_spi_dc_reset_init(painter_device_t device) {
         return false;
     }
 
-    painter_driver_t *              driver       = (painter_driver_t *)device;
+    painter_driver_t               *driver       = (painter_driver_t *)device;
     qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
 
     // Set up D/C as output low, if specified
@@ -92,14 +92,14 @@ bool qp_comms_spi_dc_reset_init(painter_device_t device) {
 }
 
 uint32_t qp_comms_spi_dc_reset_send_data(painter_device_t device, const void *data, uint32_t byte_count) {
-    painter_driver_t *              driver       = (painter_driver_t *)device;
+    painter_driver_t               *driver       = (painter_driver_t *)device;
     qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
     gpio_write_pin_high(comms_config->dc_pin);
     return qp_comms_spi_send_data(device, data, byte_count);
 }
 
 bool qp_comms_spi_dc_reset_send_command(painter_device_t device, uint8_t cmd) {
-    painter_driver_t *              driver       = (painter_driver_t *)device;
+    painter_driver_t               *driver       = (painter_driver_t *)device;
     qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
     gpio_write_pin_low(comms_config->dc_pin);
     spi_write(cmd);
@@ -107,7 +107,7 @@ bool qp_comms_spi_dc_reset_send_command(painter_device_t device, uint8_t cmd) {
 }
 
 bool qp_comms_spi_dc_reset_bulk_command_sequence(painter_device_t device, const uint8_t *sequence, size_t sequence_len) {
-    painter_driver_t *              driver       = (painter_driver_t *)device;
+    painter_driver_t               *driver       = (painter_driver_t *)device;
     qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
     for (size_t i = 0; i < sequence_len;) {
         uint8_t command   = sequence[i];

drivers/painter/generic/qp_surface_common.c

@@ -53,7 +53,7 @@ void qp_surface_update_dirty(surface_dirty_data_t *dirty, uint16_t x, uint16_t y
 // Driver vtable
 
 bool qp_surface_init(painter_device_t device, painter_rotation_t rotation) {
-    painter_driver_t *        driver  = (painter_driver_t *)device;
+    painter_driver_t         *driver  = (painter_driver_t *)device;
     surface_painter_device_t *surface = (surface_painter_device_t *)driver;
     memset(surface->buffer, 0, SURFACE_REQUIRED_BUFFER_BYTE_SIZE(driver->panel_width, driver->panel_height, driver->native_bits_per_pixel));
 
@@ -78,7 +78,7 @@ bool qp_surface_clear(painter_device_t device) {
 }
 
 bool qp_surface_flush(painter_device_t device) {
-    painter_driver_t *        driver  = (painter_driver_t *)device;
+    painter_driver_t         *driver  = (painter_driver_t *)device;
     surface_painter_device_t *surface = (surface_painter_device_t *)driver;
     surface->dirty.l = surface->dirty.t = UINT16_MAX;
     surface->dirty.r = surface->dirty.b = 0;
@@ -87,7 +87,7 @@ bool qp_surface_flush(painter_device_t device) {
 }
 
 bool qp_surface_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom) {
-    painter_driver_t *        driver  = (painter_driver_t *)device;
+    painter_driver_t         *driver  = (painter_driver_t *)device;
     surface_painter_device_t *surface = (surface_painter_device_t *)driver;
 
     // Set the viewport locations
@@ -106,9 +106,9 @@ bool qp_surface_viewport(painter_device_t device, uint16_t left, uint16_t top, u
 // Drawing routine to copy out the dirty region and send it to another device
 
 bool qp_surface_draw(painter_device_t surface, painter_device_t target, uint16_t x, uint16_t y, bool entire_surface) {
-    painter_driver_t *        surface_driver = (painter_driver_t *)surface;
+    painter_driver_t         *surface_driver = (painter_driver_t *)surface;
     surface_painter_device_t *surface_handle = (surface_painter_device_t *)surface_driver;
-    painter_driver_t *        target_driver  = (painter_driver_t *)target;
+    painter_driver_t         *target_driver  = (painter_driver_t *)target;
 
     // If we're not dirty... we're done.
     if (!surface_handle->dirty.is_dirty) {

drivers/painter/generic/qp_surface_internal.h

@@ -42,8 +42,8 @@ typedef struct surface_painter_device_t {
 
     // The target buffer
     union {
-        void *    buffer;
-        uint8_t * u8buffer;
+        void     *buffer;
+        uint8_t  *u8buffer;
         uint16_t *u16buffer;
     };
 

drivers/painter/generic/qp_surface_mono1bpp.c

@@ -55,7 +55,7 @@ static inline void stream_pixdata_mono1bpp(surface_painter_device_t *surface, co
 
 // Stream pixel data to the current write position in GRAM
 static bool qp_surface_pixdata_mono1bpp(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count) {
-    painter_driver_t *        driver  = (painter_driver_t *)device;
+    painter_driver_t         *driver  = (painter_driver_t *)device;
     surface_painter_device_t *surface = (surface_painter_device_t *)driver;
     stream_pixdata_mono1bpp(surface, (const uint8_t *)pixel_data, native_pixel_count);
     return true;

drivers/painter/generic/qp_surface_rgb565.c

@@ -43,7 +43,7 @@ static inline void stream_pixdata_rgb565(surface_painter_device_t *surface, cons
 
 // Stream pixel data to the current write position in GRAM
 static bool qp_surface_pixdata_rgb565(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count) {
-    painter_driver_t *        driver  = (painter_driver_t *)device;
+    painter_driver_t         *driver  = (painter_driver_t *)device;
     surface_painter_device_t *surface = (surface_painter_device_t *)driver;
     stream_pixdata_rgb565(surface, (const uint16_t *)pixel_data, native_pixel_count);
     return true;

drivers/painter/ili9xxx/qp_ili9486.c

@@ -72,7 +72,7 @@ bool qp_ili9486_init(painter_device_t device, painter_rotation_t rotation) {
 
 // waveshare variant needs some tweaks due to shift registers
 static bool qp_comms_spi_dc_reset_send_command_odd_cs_pulse(painter_device_t device, uint8_t cmd) {
-    painter_driver_t *              driver       = (painter_driver_t *)device;
+    painter_driver_t               *driver       = (painter_driver_t *)device;
     qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
 
     gpio_write_pin_low(comms_config->spi_config.chip_select_pin);
@@ -83,7 +83,7 @@ static bool qp_comms_spi_dc_reset_send_command_odd_cs_pulse(painter_device_t dev
 }
 
 static uint32_t qp_comms_spi_send_data_odd_cs_pulse(painter_device_t device, const void *data, uint32_t byte_count) {
-    painter_driver_t *              driver       = (painter_driver_t *)device;
+    painter_driver_t               *driver       = (painter_driver_t *)device;
     qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
 
     uint32_t       bytes_remaining = byte_count;
@@ -113,7 +113,7 @@ static uint32_t qp_comms_spi_send_data_odd_cs_pulse(painter_device_t device, con
 }
 
 static uint32_t qp_ili9486_send_data_toggling(painter_device_t device, const uint8_t *data, uint32_t byte_count) {
-    painter_driver_t *              driver       = (painter_driver_t *)device;
+    painter_driver_t               *driver       = (painter_driver_t *)device;
     qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
 
     uint32_t ret;
@@ -147,7 +147,7 @@ static bool qp_comms_spi_send_command_sequence_odd_cs_pulse(painter_device_t dev
 }
 
 static bool qp_ili9486_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom) {
-    painter_driver_t *                          driver = (painter_driver_t *)device;
+    painter_driver_t                           *driver = (painter_driver_t *)device;
     tft_panel_dc_reset_painter_driver_vtable_t *vtable = (tft_panel_dc_reset_painter_driver_vtable_t *)driver->driver_vtable;
 
     // Fix up the drawing location if required

drivers/painter/ld7032/qp_ld7032.c

@@ -62,7 +62,7 @@ uint32_t ld7032_comms_i2c_send_command_and_databuf(painter_device_t device, uint
 
 // Power control
 bool qp_ld7032_power(painter_device_t device, bool power_on) {
-    painter_driver_t *                  driver       = (painter_driver_t *)device;
+    painter_driver_t                   *driver       = (painter_driver_t *)device;
     ld7032_comms_with_command_vtable_t *comms_vtable = (ld7032_comms_with_command_vtable_t *)driver->comms_vtable;
 
     comms_vtable->send_command_data(device, LD7032_DISP_ON_OFF, power_on ? 0x01 : 0x00);
@@ -83,7 +83,7 @@ bool qp_ld7032_clear(painter_device_t device) {
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 
 void ld7032_flush_0(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer, bool inverted) {
-    painter_driver_t *                  driver       = (painter_driver_t *)device;
+    painter_driver_t                   *driver       = (painter_driver_t *)device;
     ld7032_comms_with_command_vtable_t *comms_vtable = (ld7032_comms_with_command_vtable_t *)driver->comms_vtable;
 
     int     x_start       = dirty->l >> 3;
@@ -115,7 +115,7 @@ void ld7032_flush_0(painter_device_t device, surface_dirty_data_t *dirty, const
 }
 
 void ld7032_flush_90(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer, bool inverted) {
-    painter_driver_t *                  driver       = (painter_driver_t *)device;
+    painter_driver_t                   *driver       = (painter_driver_t *)device;
     ld7032_comms_with_command_vtable_t *comms_vtable = (ld7032_comms_with_command_vtable_t *)driver->comms_vtable;
 
     int     x_start       = dirty->t >> 3;
@@ -252,7 +252,7 @@ __attribute__((weak)) bool qp_ld7032_init(painter_device_t device, painter_rotat
             break;
     }
 
-    painter_driver_t *                  pdriver      = (painter_driver_t *)device;
+    painter_driver_t                   *pdriver      = (painter_driver_t *)device;
     ld7032_comms_with_command_vtable_t *comms_vtable = (ld7032_comms_with_command_vtable_t *)pdriver->comms_vtable;
 
     if (!comms_vtable->send_command_data(device, LD7032_WRITE_DIRECTION, write_direction)) {

drivers/painter/oled_panel/qp_oled_panel.c

@@ -12,7 +12,7 @@
 
 // Power control
 bool qp_oled_panel_power(painter_device_t device, bool power_on) {
-    painter_driver_t *                  driver = (painter_driver_t *)device;
+    painter_driver_t                   *driver = (painter_driver_t *)device;
     oled_panel_painter_driver_vtable_t *vtable = (oled_panel_painter_driver_vtable_t *)driver->driver_vtable;
     qp_comms_command(device, power_on ? vtable->opcodes.display_on : vtable->opcodes.display_off);
     return true;
@@ -59,7 +59,7 @@ bool qp_oled_panel_passthru_append_pixdata(painter_device_t device, uint8_t *tar
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 
 void qp_oled_panel_page_column_flush_rot0(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer) {
-    painter_driver_t *                  driver = (painter_driver_t *)device;
+    painter_driver_t                   *driver = (painter_driver_t *)device;
     oled_panel_painter_driver_vtable_t *vtable = (oled_panel_painter_driver_vtable_t *)driver->driver_vtable;
 
     // TODO: account for offset_x/y in base driver
@@ -92,7 +92,7 @@ void qp_oled_panel_page_column_flush_rot0(painter_device_t device, surface_dirty
 }
 
 void qp_oled_panel_page_column_flush_rot90(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer) {
-    painter_driver_t *                  driver = (painter_driver_t *)device;
+    painter_driver_t                   *driver = (painter_driver_t *)device;
     oled_panel_painter_driver_vtable_t *vtable = (oled_panel_painter_driver_vtable_t *)driver->driver_vtable;
 
     // TODO: account for offset_x/y in base driver
@@ -126,7 +126,7 @@ void qp_oled_panel_page_column_flush_rot90(painter_device_t device, surface_dirt
 }
 
 void qp_oled_panel_page_column_flush_rot180(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer) {
-    painter_driver_t *                  driver = (painter_driver_t *)device;
+    painter_driver_t                   *driver = (painter_driver_t *)device;
     oled_panel_painter_driver_vtable_t *vtable = (oled_panel_painter_driver_vtable_t *)driver->driver_vtable;
 
     // TODO: account for offset_x/y in base driver
@@ -161,7 +161,7 @@ void qp_oled_panel_page_column_flush_rot180(painter_device_t device, surface_dir
 }
 
 void qp_oled_panel_page_column_flush_rot270(painter_device_t device, surface_dirty_data_t *dirty, const uint8_t *framebuffer) {
-    painter_driver_t *                  driver = (painter_driver_t *)device;
+    painter_driver_t                   *driver = (painter_driver_t *)device;
     oled_panel_painter_driver_vtable_t *vtable = (oled_panel_painter_driver_vtable_t *)driver->driver_vtable;
 
     // TODO: account for offset_x/y in base driver

drivers/painter/tft_panel/qp_tft_panel.c

@@ -12,7 +12,7 @@
 
 // Power control
 bool qp_tft_panel_power(painter_device_t device, bool power_on) {
-    painter_driver_t *                          driver = (painter_driver_t *)device;
+    painter_driver_t                           *driver = (painter_driver_t *)device;
     tft_panel_dc_reset_painter_driver_vtable_t *vtable = (tft_panel_dc_reset_painter_driver_vtable_t *)driver->driver_vtable;
     qp_comms_command(device, power_on ? vtable->opcodes.display_on : vtable->opcodes.display_off);
     return true;
@@ -33,7 +33,7 @@ bool qp_tft_panel_flush(painter_device_t device) {
 
 // Viewport to draw to
 bool qp_tft_panel_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom) {
-    painter_driver_t *                          driver = (painter_driver_t *)device;
+    painter_driver_t                           *driver = (painter_driver_t *)device;
     tft_panel_dc_reset_painter_driver_vtable_t *vtable = (tft_panel_dc_reset_painter_driver_vtable_t *)driver->driver_vtable;
 
     // Fix up the drawing location if required

drivers/ps2/ps2_mouse.c

@@ -97,7 +97,7 @@ void ps2_mouse_task(void) {
         mouse_report.x       = ps2_host_recv_response();
         mouse_report.y       = ps2_host_recv_response();
 #    ifdef PS2_MOUSE_ENABLE_SCROLLING
-        mouse_report.v       = -(ps2_host_recv_response() & PS2_MOUSE_SCROLL_MASK);
+        mouse_report.v = -(ps2_host_recv_response() & PS2_MOUSE_SCROLL_MASK);
 #    endif
     } else {
         if (debug_mouse) print("ps2_mouse: fail to get mouse packet\n");

drivers/sensors/cirque_pinnacle.c

@@ -477,9 +477,9 @@ report_mouse_t cirque_pinnacle_get_report(report_mouse_t mouse_report) {
 
     if (touchData.valid) {
         mouse_report.buttons = touchData.buttons;
-        mouse_report.x = CONSTRAIN_HID_XY(touchData.xDelta);
-        mouse_report.y = CONSTRAIN_HID_XY(touchData.yDelta);
-        mouse_report.v = touchData.wheelCount;
+        mouse_report.x       = CONSTRAIN_HID_XY(touchData.xDelta);
+        mouse_report.y       = CONSTRAIN_HID_XY(touchData.yDelta);
+        mouse_report.v       = touchData.wheelCount;
     }
     return mouse_report;
 }

drivers/sensors/pmw33xx_common.h

@@ -72,14 +72,12 @@ STATIC_ASSERT(sizeof((pmw33xx_report_t){0}.motion) == 1, "pmw33xx_report_t.motio
 #    ifndef PMW33XX_CS_PIN
 #        ifdef POINTING_DEVICE_CS_PIN
 #            define PMW33XX_CS_PIN POINTING_DEVICE_CS_PIN
-#            define PMW33XX_CS_PINS \
-                { PMW33XX_CS_PIN }
+#            define PMW33XX_CS_PINS {PMW33XX_CS_PIN}
 #        else
 #            error "No chip select pin defined -- missing PMW33XX_CS_PIN or PMW33XX_CS_PINS"
 #        endif
 #    else
-#        define PMW33XX_CS_PINS \
-            { PMW33XX_CS_PIN }
+#        define PMW33XX_CS_PINS {PMW33XX_CS_PIN}
 #    endif
 #endif
 
@@ -88,8 +86,7 @@ STATIC_ASSERT(sizeof((pmw33xx_report_t){0}.motion) == 1, "pmw33xx_report_t.motio
 #    if !defined(PMW33XX_CS_PIN_RIGHT)
 #        define PMW33XX_CS_PIN_RIGHT PMW33XX_CS_PIN
 #    endif
-#    define PMW33XX_CS_PINS_RIGHT \
-        { PMW33XX_CS_PIN_RIGHT }
+#    define PMW33XX_CS_PINS_RIGHT {PMW33XX_CS_PIN_RIGHT}
 #endif
 
 // Defines so the old variable names are swapped by the appropiate value on each half

platforms/avr/drivers/analog.c

@@ -96,7 +96,7 @@ int16_t adc_read(uint8_t mux) {
 #if defined(MUX4)
     ADMUX = aref | (mux & (_BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0)));
 #else
-    ADMUX  = aref | (mux & (_BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0)));
+    ADMUX = aref | (mux & (_BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0)));
 #endif
 
     // Start the conversion

platforms/avr/drivers/ws2812_bitbang.c

@@ -26,7 +26,7 @@
 #include "ws2812.h"
 #include "pin_defs.h"
 
-#define pinmask(pin) (_BV((pin)&0xF))
+#define pinmask(pin) (_BV((pin) & 0xF))
 
 /*
   This routine writes an array of bytes with RGB values to the Dataout pin
@@ -105,7 +105,7 @@ static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t
                                  w_nop8
 #endif
 #if (w1_nops & 16)
-                                     w_nop16
+                     w_nop16
 #endif
                      "       sbrs  %1,7  \n\t" //  '1' [03] '0' [02]
                      "       out   %2,%4 \n\t" //  '1' [--] '0' [03] - fe-low
@@ -123,7 +123,7 @@ static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t
                                  w_nop8
 #endif
 #if (w2_nops & 16)
-                                     w_nop16
+                     w_nop16
 #endif
                      "       out   %2,%4 \n\t" //  '1' [+1] '0' [+1] - fe-high
 #if (w3_nops & 1)
@@ -139,7 +139,7 @@ static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t
                                  w_nop8
 #endif
 #if (w3_nops & 16)
-                                     w_nop16
+                     w_nop16
 #endif
 
                      "       dec   %0    \n\t" //  '1' [+2] '0' [+2]
@@ -173,7 +173,7 @@ void ws2812_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
 }
 
 void ws2812_flush(void) {
-    uint8_t masklo = ~(pinmask(WS2812_DI_PIN)) & PORTx_ADDRESS(WS2812_DI_PIN);
+    uint8_t masklo = ~(pinmask(WS2812_DI_PIN))&PORTx_ADDRESS(WS2812_DI_PIN);
     uint8_t maskhi = pinmask(WS2812_DI_PIN) | PORTx_ADDRESS(WS2812_DI_PIN);
 
     ws2812_sendarray_mask((uint8_t *)ws2812_leds, WS2812_LED_COUNT * sizeof(ws2812_led_t), masklo, maskhi);

platforms/avr/gpio.h

@@ -24,17 +24,17 @@ typedef uint8_t pin_t;
 
 /* Operation of GPIO by pin. */
 
-#define gpio_set_pin_input(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
-#define gpio_set_pin_input_high(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
+#define gpio_set_pin_input(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin) & 0xF), PORTx_ADDRESS(pin) &= ~_BV((pin) & 0xF))
+#define gpio_set_pin_input_high(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin) & 0xF), PORTx_ADDRESS(pin) |= _BV((pin) & 0xF))
 #define gpio_set_pin_input_low(pin) STATIC_ASSERT(0, "GPIO pulldowns in input mode are not available on AVR")
-#define gpio_set_pin_output_push_pull(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
+#define gpio_set_pin_output_push_pull(pin) (DDRx_ADDRESS(pin) |= _BV((pin) & 0xF))
 #define gpio_set_pin_output_open_drain(pin) STATIC_ASSERT(0, "Open-drain outputs are not available on AVR")
 #define gpio_set_pin_output(pin) gpio_set_pin_output_push_pull(pin)
 
-#define gpio_write_pin_high(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
-#define gpio_write_pin_low(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
+#define gpio_write_pin_high(pin) (PORTx_ADDRESS(pin) |= _BV((pin) & 0xF))
+#define gpio_write_pin_low(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin) & 0xF))
 #define gpio_write_pin(pin, level) ((level) ? gpio_write_pin_high(pin) : gpio_write_pin_low(pin))
 
-#define gpio_read_pin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
+#define gpio_read_pin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin) & 0xF)))
 
-#define gpio_toggle_pin(pin) (PORTx_ADDRESS(pin) ^= _BV((pin)&0xF))
+#define gpio_toggle_pin(pin) (PORTx_ADDRESS(pin) ^= _BV((pin) & 0xF))

platforms/avr/hardware_id.c

@@ -13,7 +13,7 @@
 __attribute__((weak)) hardware_id_t get_hardware_id(void) {
     hardware_id_t id = {0};
     for (uint8_t i = 0; i < 10; i += 1) {
-        ((uint8_t*)&id)[i] = boot_signature_byte_get(i + 0x0E);
+        ((uint8_t *)&id)[i] = boot_signature_byte_get(i + 0x0E);
     }
     return id;
 }

platforms/chibios/bootloaders/rp2040.c

@@ -30,7 +30,7 @@ void enter_bootloader_mode_if_requested(void) {}
 // Needs to be located in a RAM section that is never initialized on boot to
 // preserve its value on reset
 static volatile uint32_t __attribute__((section(".ram0.bootloader_magic"))) magic_location;
-const uint32_t magic_token = 0xCAFEB0BA;
+const uint32_t                                                              magic_token = 0xCAFEB0BA;
 
 // We can not use the __early_init / enter_bootloader_mode_if_requested hook as
 // we depend on an already initialized system with usable memory regions and

platforms/chibios/drivers/analog.c

@@ -145,7 +145,7 @@ static ADCConversionGroup adcConversionGroup = {
     .smpr  = ADC_SAMPLING_RATE,
 #elif defined(USE_ADCV2)
 #    if !defined(STM32F1XX) && !defined(GD32VF103) && !defined(WB32F3G71xx) && !defined(WB32FQ95xx) && !defined(AT32F415)
-    .cr2  = ADC_CR2_SWSTART, // F103 seem very unhappy with, F401 seems very unhappy without...
+    .cr2 = ADC_CR2_SWSTART, // F103 seem very unhappy with, F401 seems very unhappy without...
 #    endif
 #    if defined(AT32F415)
     .spt2 = ADC_SPT2_CSPT_AN0(ADC_SAMPLING_RATE) | ADC_SPT2_CSPT_AN1(ADC_SAMPLING_RATE) | ADC_SPT2_CSPT_AN2(ADC_SAMPLING_RATE) | ADC_SPT2_CSPT_AN3(ADC_SAMPLING_RATE) | ADC_SPT2_CSPT_AN4(ADC_SAMPLING_RATE) | ADC_SPT2_CSPT_AN5(ADC_SAMPLING_RATE) | ADC_SPT2_CSPT_AN6(ADC_SAMPLING_RATE) | ADC_SPT2_CSPT_AN7(ADC_SAMPLING_RATE) | ADC_SPT2_CSPT_AN8(ADC_SAMPLING_RATE) | ADC_SPT2_CSPT_AN9(ADC_SAMPLING_RATE),

platforms/chibios/drivers/audio_dac_basic.c

@@ -77,9 +77,9 @@ GPTConfig gpt7cfg1 = {.frequency = AUDIO_DAC_SAMPLE_RATE,
 
 static void gpt_audio_state_cb(GPTDriver *gptp);
 GPTConfig   gptStateUpdateCfg = {.frequency = 10,
-                               .callback  = gpt_audio_state_cb,
-                               .cr2       = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event.    */
-                               .dier      = 0U};
+                                 .callback  = gpt_audio_state_cb,
+                                 .cr2       = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event.    */
+                                 .dier      = 0U};
 
 static const DACConfig dac_conf_ch1 = {.init = AUDIO_DAC_OFF_VALUE, .datamode = DAC_DHRM_12BIT_RIGHT};
 static const DACConfig dac_conf_ch2 = {.init = AUDIO_DAC_OFF_VALUE, .datamode = DAC_DHRM_12BIT_RIGHT};

platforms/chibios/drivers/audio_pwm_software.c

@@ -63,8 +63,8 @@ void         channel_1_set_frequency(float freq) {
     pwmChangePeriod(&AUDIO_PWM_DRIVER, period);
 
     pwmEnableChannel(&AUDIO_PWM_DRIVER, AUDIO_PWM_CHANNEL - 1,
-                     // adjust the duty-cycle so that the output is for 'note_timbre' duration HIGH
-                     PWM_PERCENTAGE_TO_WIDTH(&AUDIO_PWM_DRIVER, (100 - note_timbre) * 100));
+                             // adjust the duty-cycle so that the output is for 'note_timbre' duration HIGH
+                             PWM_PERCENTAGE_TO_WIDTH(&AUDIO_PWM_DRIVER, (100 - note_timbre) * 100));
 }
 
 float channel_1_get_frequency(void) {
@@ -117,8 +117,8 @@ GPTConfig   gptCFG = {
        and the .interval counts from 64 downwards - audio_update_state is
        called just often enough to not miss anything
     */
-    .frequency = 60 * 64,
-    .callback  = gpt_callback,
+      .frequency = 60 * 64,
+      .callback  = gpt_callback,
 };
 
 void audio_driver_initialize_impl(void) {

platforms/chibios/drivers/eeprom/eeprom_kinetis_flexram.c

@@ -482,7 +482,7 @@ uint32_t eeprom_read_dword(const uint32_t *addr) {
 
 void eeprom_read_block(void *buf, const void *addr, size_t len) {
     const uint8_t *p    = (const uint8_t *)addr;
-    uint8_t *      dest = (uint8_t *)buf;
+    uint8_t       *dest = (uint8_t *)buf;
     while (len--) {
         *dest++ = eeprom_read_byte(p++);
     }
@@ -507,7 +507,7 @@ void eeprom_write_dword(uint32_t *addr, uint32_t value) {
 }
 
 void eeprom_write_block(const void *buf, void *addr, size_t len) {
-    uint8_t *      p   = (uint8_t *)addr;
+    uint8_t       *p   = (uint8_t *)addr;
     const uint8_t *src = (const uint8_t *)buf;
     while (len--) {
         eeprom_write_byte(p++, *src++);
@@ -538,7 +538,7 @@ void eeprom_update_dword(uint32_t *addr, uint32_t value) {
 }
 
 void eeprom_update_block(const void *buf, void *addr, size_t len) {
-    uint8_t *      p   = (uint8_t *)addr;
+    uint8_t       *p   = (uint8_t *)addr;
     const uint8_t *src = (const uint8_t *)buf;
     while (len--) {
         eeprom_write_byte(p++, *src++);

platforms/chibios/drivers/eeprom/eeprom_legacy_emulated_flash.c

@@ -577,7 +577,7 @@ void eeprom_driver_erase(void) {
 
 void eeprom_read_block(void *buf, const void *addr, size_t len) {
     const uint8_t *src  = (const uint8_t *)addr;
-    uint8_t *      dest = (uint8_t *)buf;
+    uint8_t       *dest = (uint8_t *)buf;
 
     /* Check word alignment */
     if (len && (uintptr_t)src % 2) {
@@ -606,7 +606,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
 }
 
 void eeprom_write_block(const void *buf, void *addr, size_t len) {
-    uint8_t *      dest = (uint8_t *)addr;
+    uint8_t       *dest = (uint8_t *)addr;
     const uint8_t *src  = (const uint8_t *)buf;
 
     /* Check word alignment */

platforms/chibios/drivers/flash/legacy_flash_ops.c

@@ -171,7 +171,7 @@ FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) {
             FLASH->CR |= FLASH_CR_PSIZE_0;
 #endif
             FLASH->CR |= FLASH_CR_PG;
-            *(__IO uint16_t*)Address = Data;
+            *(__IO uint16_t *)Address = Data;
             /* Wait for last operation to be completed */
             status = FLASH_WaitForLastOperation(ProgramTimeout);
             if (status != FLASH_TIMEOUT) {

platforms/chibios/drivers/serial_usart.c

@@ -27,12 +27,12 @@ static QMKSerialConfig serial_config = {
 #    else
     .baud = (SERIAL_USART_SPEED),
 #    endif
-    .cr1   = (SERIAL_USART_CR1),
-    .cr2   = (SERIAL_USART_CR2),
+    .cr1 = (SERIAL_USART_CR1),
+    .cr2 = (SERIAL_USART_CR2),
 #    if !defined(SERIAL_USART_FULL_DUPLEX)
-    .cr3   = ((SERIAL_USART_CR3) | USART_CR3_HDSEL) /* activate half-duplex mode */
+    .cr3 = ((SERIAL_USART_CR3) | USART_CR3_HDSEL) /* activate half-duplex mode */
 #    else
-    .cr3  = (SERIAL_USART_CR3)
+    .cr3 = (SERIAL_USART_CR3)
 #    endif
 };
 #elif defined(MCU_RP) /* Raspberry Pi MCUs */

platforms/chibios/drivers/uart_sio.c

@@ -82,13 +82,13 @@ static SIOConfig sioConfig = {
 };
 #else
 static SIOConfig sioConfig = {
-    .baud  = SIO_DEFAULT_BITRATE,
+    .baud = SIO_DEFAULT_BITRATE,
 #    if defined(MCU_STM32) && defined(USE_USARTV3)
     .presc = USART_PRESC1,
 #    endif
-    .cr1   = UART_CR1,
-    .cr2   = UART_CR2,
-    .cr3   = UART_CR3,
+    .cr1 = UART_CR1,
+    .cr2 = UART_CR2,
+    .cr3 = UART_CR3,
 };
 #endif
 

platforms/chibios/drivers/wear_leveling/wear_leveling_efl.c

@@ -20,7 +20,7 @@ static flash_sector_t first_sector = UINT16_MAX;
 #endif // WEAR_LEVELING_EFL_OMIT_LAST_SECTOR_COUNT
 
 static flash_sector_t sector_count = UINT16_MAX;
-static BaseFlash *    flash;
+static BaseFlash     *flash;
 static bool           flash_erased_is_one;
 static volatile bool  is_issuing_read    = false;
 static volatile bool  ecc_error_occurred = false;

platforms/chibios/drivers/ws2812_pwm.c

@@ -310,7 +310,7 @@ void ws2812_init(void) {
     palSetLineMode(WS2812_DI_PIN, WS2812_OUTPUT_MODE);
 
     // PWM Configuration
-    //#pragma GCC diagnostic ignored "-Woverride-init"  // Turn off override-init warning for this struct. We use the overriding ability to set a "default" channel config
+    // #pragma GCC diagnostic ignored "-Woverride-init"  // Turn off override-init warning for this struct. We use the overriding ability to set a "default" channel config
     static const PWMConfig ws2812_pwm_config = {
         .frequency = WS2812_PWM_TICK_FREQUENCY,
         .period    = WS2812_PWM_PERIOD, // Mit dieser Periode wird UDE-Event erzeugt und ein neuer Wert (Länge WS2812_BIT_N) vom DMA ins CCR geschrieben
@@ -328,7 +328,7 @@ void ws2812_init(void) {
         .dier = TIM_DIER_UDE, // DMA on update event for next period
 #endif
     };
-    //#pragma GCC diagnostic pop  // Restore command-line warning options
+    // #pragma GCC diagnostic pop  // Restore command-line warning options
 
     // Configure DMA
     // dmaInit(); // Joe added this

platforms/chibios/drivers/ws2812_spi.c

@@ -188,8 +188,7 @@ void ws2812_init(void) {
         0,
         WS2812_SPI_DIVISOR
 #    else
-        WS2812_SPI_DIVISOR_CR1_BR_X,
-        0
+        WS2812_SPI_DIVISOR_CR1_BR_X, 0
 #    endif
 #else
     // HAL_SPI_V2

platforms/progmem.h

@@ -6,13 +6,13 @@
 #    include <string.h>
 #    define PROGMEM
 #    define PSTR(x) x
-#    define PGM_P const char*
+#    define PGM_P const char *
 #    define memcmp_P(s1, s2, n) memcmp(s1, s2, n)
 #    define memcpy_P(dest, src, n) memcpy(dest, src, n)
-#    define pgm_read_byte(address_short) *((uint8_t*)(address_short))
-#    define pgm_read_word(address_short) *((uint16_t*)(address_short))
-#    define pgm_read_dword(address_short) *((uint32_t*)(address_short))
-#    define pgm_read_ptr(address_short) *((void**)(address_short))
+#    define pgm_read_byte(address_short) *((uint8_t *)(address_short))
+#    define pgm_read_word(address_short) *((uint16_t *)(address_short))
+#    define pgm_read_dword(address_short) *((uint32_t *)(address_short))
+#    define pgm_read_ptr(address_short) *((void **)(address_short))
 #    define strcmp_P(s1, s2) strcmp(s1, s2)
 #    define strcpy_P(dest, src) strcpy(dest, src)
 #    define strlen_P(src) strlen(src)

platforms/synchronization_util.h

@@ -10,8 +10,8 @@ void split_shared_memory_unlock(void);
 #    endif
 #else
 #    if defined(SPLIT_KEYBOARD)
-inline void split_shared_memory_lock(void){};
-inline void split_shared_memory_unlock(void){};
+inline void split_shared_memory_lock(void) {};
+inline void split_shared_memory_unlock(void) {};
 #    endif
 #endif
 

platforms/test/eeprom.c

@@ -40,7 +40,7 @@ uint32_t eeprom_read_dword(const uint32_t *addr) {
 
 void eeprom_read_block(void *buf, const void *addr, size_t len) {
     const uint8_t *p    = (const uint8_t *)addr;
-    uint8_t *      dest = (uint8_t *)buf;
+    uint8_t       *dest = (uint8_t *)buf;
     while (len--) {
         *dest++ = eeprom_read_byte(p++);
     }
@@ -61,7 +61,7 @@ void eeprom_write_dword(uint32_t *addr, uint32_t value) {
 }
 
 void eeprom_write_block(const void *buf, void *addr, size_t len) {
-    uint8_t *      p   = (uint8_t *)addr;
+    uint8_t       *p   = (uint8_t *)addr;
     const uint8_t *src = (const uint8_t *)buf;
     while (len--) {
         eeprom_write_byte(p++, *src++);
@@ -87,7 +87,7 @@ void eeprom_update_dword(uint32_t *addr, uint32_t value) {
 }
 
 void eeprom_update_block(const void *buf, void *addr, size_t len) {
-    uint8_t *      p   = (uint8_t *)addr;
+    uint8_t       *p   = (uint8_t *)addr;
     const uint8_t *src = (const uint8_t *)buf;
     while (len--) {
         eeprom_write_byte(p++, *src++);

platforms/test/eeprom_legacy_emulated_flash_tests.cpp

@@ -52,7 +52,7 @@ extern "C" {
 #define BYTE_VALUE(addr, value) (((addr) << 8) | (value))
 #define WORD_ZERO(addr) (0x8000 | ((addr) >> 1))
 #define WORD_ONE(addr) (0xA000 | ((addr) >> 1))
-#define WORD_NEXT(addr) (0xE000 | (((addr)-0x80) >> 1))
+#define WORD_NEXT(addr) (0xE000 | (((addr) - 0x80) >> 1))
 
 class EepromStm32Test : public testing::Test {
    public:

platforms/test/legacy_flash_ops_mock.c

@@ -35,9 +35,9 @@ FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) {
     if (flash_locked) return FLASH_ERROR_WRP;
     Address -= (uintptr_t)FlashBuf;
     if (Address >= MOCK_FLASH_SIZE) return FLASH_BAD_ADDRESS;
-    uint16_t oldData = *(uint16_t*)&FlashBuf[Address];
+    uint16_t oldData = *(uint16_t *)&FlashBuf[Address];
     if (oldData == 0xFFFF || Data == 0) {
-        *(uint16_t*)&FlashBuf[Address] = Data;
+        *(uint16_t *)&FlashBuf[Address] = Data;
         return FLASH_COMPLETE;
     } else {
         return FLASH_ERROR_PG;

quantum/action_code.h

@@ -167,11 +167,11 @@ enum mods_codes {
     MODS_TAP_TOGGLE = 0x01,
 };
 #define ACTION_KEY(key) ACTION(ACT_MODS, (key))
-#define ACTION_MODS(mods) ACTION(ACT_MODS, ((mods)&0x1f) << 8 | 0)
-#define ACTION_MODS_KEY(mods, key) ACTION(ACT_MODS, ((mods)&0x1f) << 8 | (key))
-#define ACTION_MODS_TAP_KEY(mods, key) ACTION(ACT_MODS_TAP, ((mods)&0x1f) << 8 | (key))
-#define ACTION_MODS_ONESHOT(mods) ACTION(ACT_MODS_TAP, ((mods)&0x1f) << 8 | MODS_ONESHOT)
-#define ACTION_MODS_TAP_TOGGLE(mods) ACTION(ACT_MODS_TAP, ((mods)&0x1f) << 8 | MODS_TAP_TOGGLE)
+#define ACTION_MODS(mods) ACTION(ACT_MODS, ((mods) & 0x1f) << 8 | 0)
+#define ACTION_MODS_KEY(mods, key) ACTION(ACT_MODS, ((mods) & 0x1f) << 8 | (key))
+#define ACTION_MODS_TAP_KEY(mods, key) ACTION(ACT_MODS_TAP, ((mods) & 0x1f) << 8 | (key))
+#define ACTION_MODS_ONESHOT(mods) ACTION(ACT_MODS_TAP, ((mods) & 0x1f) << 8 | MODS_ONESHOT)
+#define ACTION_MODS_TAP_TOGGLE(mods) ACTION(ACT_MODS_TAP, ((mods) & 0x1f) << 8 | MODS_TAP_TOGGLE)
 
 /** \brief Other Keys
  */
@@ -210,7 +210,7 @@ enum layer_param_tap_op {
     OP_SET_CLEAR,
     OP_ONESHOT,
 };
-#define ACTION_LAYER_BITOP(op, part, bits, on) ACTION(ACT_LAYER, (op) << 10 | (on) << 8 | (part) << 5 | ((bits)&0x1f))
+#define ACTION_LAYER_BITOP(op, part, bits, on) ACTION(ACT_LAYER, (op) << 10 | (on) << 8 | (part) << 5 | ((bits) & 0x1f))
 #define ACTION_LAYER_TAP(layer, key) ACTION(ACT_LAYER_TAP, (layer) << 8 | (key))
 /* Default Layer */
 #define ACTION_DEFAULT_LAYER_SET(layer) ACTION_DEFAULT_LAYER_BIT_SET((layer) / 4, 1 << ((layer) % 4))

quantum/action_tapping.c

@@ -444,28 +444,28 @@ bool process_tapping(keyrecord_t *keyp) {
                                 && !(MAYBE_RETRO_SHIFTING(event, keyp) && get_auto_shifted_key(get_record_keycode(keyp, false), keyp))
 #    endif
                             ) {
-                            // Settle the tapping key as *held*, since
-                            // HOLD_ON_OTHER_KEY_PRESS is enabled for this key.
-                            ac_dprintf("Tapping: End. No tap. Interfered by pressed key\n");
-                            process_record(&tapping_key);
+                                // Settle the tapping key as *held*, since
+                                // HOLD_ON_OTHER_KEY_PRESS is enabled for this key.
+                                ac_dprintf("Tapping: End. No tap. Interfered by pressed key\n");
+                                process_record(&tapping_key);
 
 #    if defined(CHORDAL_HOLD)
-                            if (waiting_buffer_tail != waiting_buffer_head && is_tap_record(&waiting_buffer[waiting_buffer_tail])) {
-                                tapping_key = waiting_buffer[waiting_buffer_tail];
-                                // Pop tail from the queue.
-                                waiting_buffer_tail = (waiting_buffer_tail + 1) % WAITING_BUFFER_SIZE;
-                                debug_waiting_buffer();
-                            } else
+                                if (waiting_buffer_tail != waiting_buffer_head && is_tap_record(&waiting_buffer[waiting_buffer_tail])) {
+                                    tapping_key = waiting_buffer[waiting_buffer_tail];
+                                    // Pop tail from the queue.
+                                    waiting_buffer_tail = (waiting_buffer_tail + 1) % WAITING_BUFFER_SIZE;
+                                    debug_waiting_buffer();
+                                } else
 #    endif // CHORDAL_HOLD
-                            {
-                                tapping_key = (keyrecord_t){0};
-                            }
-                            debug_tapping_key();
+                                {
+                                    tapping_key = (keyrecord_t){0};
+                                }
+                                debug_tapping_key();
 
 #    if defined(CHORDAL_HOLD)
-                            waiting_buffer_process_regular();
+                                waiting_buffer_process_regular();
 #    endif // CHORDAL_HOLD
-                        }
+                            }
                     }
                     // enqueue
                     return false;
@@ -775,7 +775,7 @@ static uint8_t waiting_buffer_find_chordal_hold_tap(void) {
     uint16_t     prev_keycode = get_record_keycode(&tapping_key, false);
     uint8_t      first_tap    = WAITING_BUFFER_SIZE;
     for (uint8_t i = waiting_buffer_tail; i != waiting_buffer_head; i = (i + 1) % WAITING_BUFFER_SIZE) {
-        keyrecord_t *  cur         = &waiting_buffer[i];
+        keyrecord_t   *cur         = &waiting_buffer[i];
         const uint16_t cur_keycode = get_record_keycode(cur, false);
         if (!cur->event.pressed || !is_mt_or_lt(prev_keycode)) {
             break;

quantum/action_util.h

@@ -114,8 +114,7 @@ void clear_oneshot_swaphands(void);
 void neutralize_flashing_modifiers(uint8_t active_mods);
 #endif
 #ifndef MODS_TO_NEUTRALIZE
-#    define MODS_TO_NEUTRALIZE \
-        { MOD_BIT(KC_LEFT_ALT), MOD_BIT(KC_LEFT_GUI) }
+#    define MODS_TO_NEUTRALIZE {MOD_BIT(KC_LEFT_ALT), MOD_BIT(KC_LEFT_GUI)}
 #endif
 
 #ifdef __cplusplus

quantum/audio/musical_notes.h

@@ -21,12 +21,10 @@
 // in beats-per-minute
 #endif
 
-#define SONG(notes...) \
-    { notes }
+#define SONG(notes...) {notes}
 
 // Note Types
-#define MUSICAL_NOTE(note, duration) \
-    { (NOTE##note), duration }
+#define MUSICAL_NOTE(note, duration) {(NOTE##note), duration}
 
 #define BREVE_NOTE(note) MUSICAL_NOTE(note, 128)
 #define WHOLE_NOTE(note) MUSICAL_NOTE(note, 64)

quantum/backlight/backlight_driver_common.c

@@ -16,7 +16,9 @@ static const pin_t backlight_pins[] = BACKLIGHT_PINS;
 #    define FOR_EACH_LED(x)                                 \
         for (uint8_t i = 0; i < BACKLIGHT_LED_COUNT; i++) { \
             pin_t backlight_pin = backlight_pins[i];        \
-            { x }                                           \
+            {                                               \
+                x                                           \
+            }                                               \
         }
 #else
 // we support only one backlight pin

quantum/command.c

@@ -629,7 +629,7 @@ static void mousekey_console_help(void) {
 bool mousekey_console(uint8_t code) {
     static uint8_t  param = 0;
     static uint8_t *pp    = NULL;
-    static char *   desc  = NULL;
+    static char    *desc  = NULL;
 
 #    if defined(NO_PRINT) || defined(USER_PRINT) /* -Wunused-parameter */
     (void)desc;

quantum/deferred_exec.h

@@ -78,7 +78,7 @@ typedef struct deferred_executor_t {
     deferred_token         token;
     uint32_t               trigger_time;
     deferred_exec_callback callback;
-    void *                 cb_arg;
+    void                  *cb_arg;
 } deferred_executor_t;
 
 /**

quantum/dip_switch.h

@@ -49,7 +49,6 @@ void dip_switch_task(void);
 
 #ifdef DIP_SWITCH_MAP_ENABLE
 #    define NUM_DIP_STATES 2
-#    define DIP_SWITCH_OFF_ON(off, on) \
-        { (off), (on) }
+#    define DIP_SWITCH_OFF_ON(off, on) {(off), (on)}
 extern const uint16_t dip_switch_map[NUM_DIP_SWITCHES][NUM_DIP_STATES];
 #endif // DIP_SWITCH_MAP_ENABLE

quantum/encoder.h

@@ -111,8 +111,7 @@ void encoder_signal_queue_drain(void);
 
 #    ifdef ENCODER_MAP_ENABLE
 #        define NUM_DIRECTIONS 2
-#        define ENCODER_CCW_CW(ccw, cw) \
-            { (cw), (ccw) }
+#        define ENCODER_CCW_CW(ccw, cw) {(cw), (ccw)}
 extern const uint16_t encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS];
 #    endif // ENCODER_MAP_ENABLE
 

quantum/encoder/tests/config_mock.h

@@ -7,10 +7,8 @@
 #define MATRIX_COLS 1
 
 /* Here, "pins" from 0 to 31 are allowed. */
-#define ENCODER_A_PINS \
-    { 0 }
-#define ENCODER_B_PINS \
-    { 1 }
+#define ENCODER_A_PINS {0}
+#define ENCODER_B_PINS {1}
 
 #ifdef __cplusplus
 extern "C" {

quantum/encoder/tests/config_mock_split_left_eq_right.h

@@ -7,14 +7,10 @@
 #define MATRIX_COLS 1
 
 /* Here, "pins" from 0 to 31 are allowed. */
-#define ENCODER_A_PINS \
-    { 0, 2 }
-#define ENCODER_B_PINS \
-    { 1, 3 }
-#define ENCODER_A_PINS_RIGHT \
-    { 4, 6 }
-#define ENCODER_B_PINS_RIGHT \
-    { 5, 7 }
+#define ENCODER_A_PINS {0, 2}
+#define ENCODER_B_PINS {1, 3}
+#define ENCODER_A_PINS_RIGHT {4, 6}
+#define ENCODER_B_PINS_RIGHT {5, 7}
 
 #ifdef __cplusplus
 extern "C" {

quantum/encoder/tests/config_mock_split_left_gt_right.h

@@ -7,14 +7,10 @@
 #define MATRIX_COLS 1
 
 /* Here, "pins" from 0 to 31 are allowed. */
-#define ENCODER_A_PINS \
-    { 0, 2, 4 }
-#define ENCODER_B_PINS \
-    { 1, 3, 5 }
-#define ENCODER_A_PINS_RIGHT \
-    { 6, 8 }
-#define ENCODER_B_PINS_RIGHT \
-    { 7, 9 }
+#define ENCODER_A_PINS {0, 2, 4}
+#define ENCODER_B_PINS {1, 3, 5}
+#define ENCODER_A_PINS_RIGHT {6, 8}
+#define ENCODER_B_PINS_RIGHT {7, 9}
 
 #ifdef __cplusplus
 extern "C" {

quantum/encoder/tests/config_mock_split_left_lt_right.h

@@ -7,14 +7,10 @@
 #define MATRIX_COLS 1
 
 /* Here, "pins" from 0 to 31 are allowed. */
-#define ENCODER_A_PINS \
-    { 0, 2 }
-#define ENCODER_B_PINS \
-    { 1, 3 }
-#define ENCODER_A_PINS_RIGHT \
-    { 4, 6, 8 }
-#define ENCODER_B_PINS_RIGHT \
-    { 5, 7, 9 }
+#define ENCODER_A_PINS {0, 2}
+#define ENCODER_B_PINS {1, 3}
+#define ENCODER_A_PINS_RIGHT {4, 6, 8}
+#define ENCODER_B_PINS_RIGHT {5, 7, 9}
 
 #ifdef __cplusplus
 extern "C" {

quantum/encoder/tests/config_mock_split_no_left.h

@@ -8,13 +8,13 @@
 
 /* Here, "pins" from 0 to 31 are allowed. */
 #define ENCODER_A_PINS \
-    {}
+    {                  \
+    }
 #define ENCODER_B_PINS \
-    {}
-#define ENCODER_A_PINS_RIGHT \
-    { 0, 2 }
-#define ENCODER_B_PINS_RIGHT \
-    { 1, 3 }
+    {                  \
+    }
+#define ENCODER_A_PINS_RIGHT {0, 2}
+#define ENCODER_B_PINS_RIGHT {1, 3}
 
 #ifdef __cplusplus
 extern "C" {

quantum/encoder/tests/config_mock_split_no_right.h

@@ -7,14 +7,14 @@
 #define MATRIX_COLS 1
 
 /* Here, "pins" from 0 to 31 are allowed. */
-#define ENCODER_A_PINS \
-    { 0, 2 }
-#define ENCODER_B_PINS \
-    { 1, 3 }
+#define ENCODER_A_PINS {0, 2}
+#define ENCODER_B_PINS {1, 3}
 #define ENCODER_A_PINS_RIGHT \
-    {}
+    {                        \
+    }
 #define ENCODER_B_PINS_RIGHT \
-    {}
+    {                        \
+    }
 
 #ifdef __cplusplus
 extern "C" {

quantum/encoder/tests/config_mock_split_role.h

@@ -7,14 +7,10 @@
 #define MATRIX_COLS 1
 
 /* Here, "pins" from 0 to 31 are allowed. */
-#define ENCODER_A_PINS \
-    { 0, 2 }
-#define ENCODER_B_PINS \
-    { 1, 3 }
-#define ENCODER_A_PINS_RIGHT \
-    { 4, 6 }
-#define ENCODER_B_PINS_RIGHT \
-    { 5, 7 }
+#define ENCODER_A_PINS {0, 2}
+#define ENCODER_B_PINS {1, 3}
+#define ENCODER_A_PINS_RIGHT {4, 6}
+#define ENCODER_B_PINS_RIGHT {5, 7}
 
 #ifdef __cplusplus
 extern "C" {

quantum/joystick.h

@@ -64,10 +64,8 @@
 
 // configure on input_pin of the joystick_axes array entry to NO_PIN
 // to prevent it from being read from the ADC. This allows outputting forged axis value.
-#define JOYSTICK_AXIS_VIRTUAL \
-    { NO_PIN, 0, JOYSTICK_MAX_VALUE / 2, JOYSTICK_MAX_VALUE }
-#define JOYSTICK_AXIS_IN(INPUT_PIN, LOW, REST, HIGH) \
-    { INPUT_PIN, LOW, REST, HIGH }
+#define JOYSTICK_AXIS_VIRTUAL {NO_PIN, 0, JOYSTICK_MAX_VALUE / 2, JOYSTICK_MAX_VALUE}
+#define JOYSTICK_AXIS_IN(INPUT_PIN, LOW, REST, HIGH) {INPUT_PIN, LOW, REST, HIGH}
 
 typedef struct {
     pin_t input_pin;

quantum/keycode.h

@@ -34,7 +34,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define IS_MOUSEKEY_WHEEL(code) (QK_MOUSE_WHEEL_UP <= (code) && (code) <= QK_MOUSE_WHEEL_RIGHT)
 #define IS_MOUSEKEY_ACCEL(code) (QK_MOUSE_ACCELERATION_0 <= (code) && (code) <= QK_MOUSE_ACCELERATION_2)
 
-#define MOD_BIT(code) (1 << ((code)&0x07))
+#define MOD_BIT(code) (1 << ((code) & 0x07))
 
 // clang-format off
 

quantum/matrix.c

@@ -54,7 +54,7 @@ static SPLIT_MUTABLE pin_t direct_pins[MATRIX_ROWS_PER_HAND][MATRIX_COLS] = DIRE
 static SPLIT_MUTABLE_ROW pin_t row_pins[MATRIX_ROWS_PER_HAND] = MATRIX_ROW_PINS;
 #    endif // MATRIX_ROW_PINS
 #    ifdef MATRIX_COL_PINS
-static SPLIT_MUTABLE_COL pin_t col_pins[MATRIX_COLS]          = MATRIX_COL_PINS;
+static SPLIT_MUTABLE_COL pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
 #    endif // MATRIX_COL_PINS
 #endif
 

quantum/mousekey.c

@@ -501,7 +501,7 @@ void mousekey_off(uint8_t code) {
 
 enum { mkspd_unmod, mkspd_0, mkspd_1, mkspd_2, mkspd_COUNT };
 #    ifndef MK_MOMENTARY_ACCEL
-static uint8_t  mk_speed                 = mkspd_1;
+static uint8_t mk_speed = mkspd_1;
 #    else
 static uint8_t mk_speed      = mkspd_unmod;
 static uint8_t mkspd_DEFAULT = mkspd_unmod;

quantum/nvm/eeprom/nvm_dynamic_keymap.c

@@ -124,7 +124,7 @@ void nvm_dynamic_keymap_update_encoder(uint8_t layer, uint8_t encoder_id, bool c
 
 void nvm_dynamic_keymap_read_buffer(uint32_t offset, uint32_t size, uint8_t *data) {
     uint32_t dynamic_keymap_eeprom_size = DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2;
-    void *   source                     = (void *)(uintptr_t)(DYNAMIC_KEYMAP_EEPROM_ADDR + offset);
+    void    *source                     = (void *)(uintptr_t)(DYNAMIC_KEYMAP_EEPROM_ADDR + offset);
     uint8_t *target                     = data;
     for (uint32_t i = 0; i < size; i++) {
         if (offset + i < dynamic_keymap_eeprom_size) {
@@ -139,7 +139,7 @@ void nvm_dynamic_keymap_read_buffer(uint32_t offset, uint32_t size, uint8_t *dat
 
 void nvm_dynamic_keymap_update_buffer(uint32_t offset, uint32_t size, uint8_t *data) {
     uint32_t dynamic_keymap_eeprom_size = DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2;
-    void *   target                     = (void *)(uintptr_t)(DYNAMIC_KEYMAP_EEPROM_ADDR + offset);
+    void    *target                     = (void *)(uintptr_t)(DYNAMIC_KEYMAP_EEPROM_ADDR + offset);
     uint8_t *source                     = data;
     for (uint32_t i = 0; i < size; i++) {
         if (offset + i < dynamic_keymap_eeprom_size) {
@@ -155,7 +155,7 @@ uint32_t nvm_dynamic_keymap_macro_size(void) {
 }
 
 void nvm_dynamic_keymap_macro_read_buffer(uint32_t offset, uint32_t size, uint8_t *data) {
-    void *   source = (void *)(uintptr_t)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + offset);
+    void    *source = (void *)(uintptr_t)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + offset);
     uint8_t *target = data;
     for (uint16_t i = 0; i < size; i++) {
         if (offset + i < DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE) {
@@ -169,7 +169,7 @@ void nvm_dynamic_keymap_macro_read_buffer(uint32_t offset, uint32_t size, uint8_
 }
 
 void nvm_dynamic_keymap_macro_update_buffer(uint32_t offset, uint32_t size, uint8_t *data) {
-    void *   target = (void *)(uintptr_t)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + offset);
+    void    *target = (void *)(uintptr_t)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + offset);
     uint8_t *source = data;
     for (uint16_t i = 0; i < size; i++) {
         if (offset + i < DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE) {
@@ -181,8 +181,8 @@ void nvm_dynamic_keymap_macro_update_buffer(uint32_t offset, uint32_t size, uint
 }
 
 void nvm_dynamic_keymap_macro_reset(void) {
-    void *  start     = (void *)(uintptr_t)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR);
-    void *  end       = (void *)(uintptr_t)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE);
+    void   *start     = (void *)(uintptr_t)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR);
+    void   *end       = (void *)(uintptr_t)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE);
     long    remaining = end - start;
     uint8_t dummy[16] = {0};
     for (int i = 0; i < DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE; i += sizeof(dummy)) {

quantum/nvm/eeprom/nvm_eeconfig.c

@@ -246,8 +246,8 @@ uint32_t nvm_eeconfig_update_kb_datablock(const void *data, uint32_t offset, uin
 void nvm_eeconfig_init_kb_datablock(void) {
     eeprom_update_dword(EECONFIG_KEYBOARD, (EECONFIG_KB_DATA_VERSION));
 
-    void *  start     = (void *)(uintptr_t)(EECONFIG_KB_DATABLOCK);
-    void *  end       = (void *)(uintptr_t)(EECONFIG_KB_DATABLOCK + EECONFIG_KB_DATA_SIZE);
+    void   *start     = (void *)(uintptr_t)(EECONFIG_KB_DATABLOCK);
+    void   *end       = (void *)(uintptr_t)(EECONFIG_KB_DATABLOCK + EECONFIG_KB_DATA_SIZE);
     long    remaining = end - start;
     uint8_t dummy[16] = {0};
     for (int i = 0; i < EECONFIG_KB_DATA_SIZE; i += sizeof(dummy)) {
@@ -290,8 +290,8 @@ uint32_t nvm_eeconfig_update_user_datablock(const void *data, uint32_t offset, u
 void nvm_eeconfig_init_user_datablock(void) {
     eeprom_update_dword(EECONFIG_USER, (EECONFIG_USER_DATA_VERSION));
 
-    void *  start     = (void *)(uintptr_t)(EECONFIG_USER_DATABLOCK);
-    void *  end       = (void *)(uintptr_t)(EECONFIG_USER_DATABLOCK + EECONFIG_USER_DATA_SIZE);
+    void   *start     = (void *)(uintptr_t)(EECONFIG_USER_DATABLOCK);
+    void   *end       = (void *)(uintptr_t)(EECONFIG_USER_DATABLOCK + EECONFIG_USER_DATA_SIZE);
     long    remaining = end - start;
     uint8_t dummy[16] = {0};
     for (int i = 0; i < EECONFIG_USER_DATA_SIZE; i += sizeof(dummy)) {

quantum/painter/lvgl/qp_lvgl.c

@@ -17,7 +17,7 @@ static deferred_executor_t lvgl_executors[2] = {0}; // For lv_tick_inc and lv_ta
 static lvgl_state_t        lvgl_states[2]    = {0}; // For lv_tick_inc and lv_task_handler
 
 painter_device_t selected_display = NULL;
-void *           color_buffer     = NULL;
+void            *color_buffer     = NULL;
 
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 // Quantum Painter LVGL Integration Internal: qp_lvgl_flush
@@ -33,7 +33,7 @@ void qp_lvgl_flush(lv_disp_drv_t *disp, const lv_area_t *area, lv_color_t *color
 }
 
 static uint32_t tick_task_callback(uint32_t trigger_time, void *cb_arg) {
-    lvgl_state_t *  state     = (lvgl_state_t *)cb_arg;
+    lvgl_state_t   *state     = (lvgl_state_t *)cb_arg;
     static uint32_t last_tick = 0;
     switch (state->fnc_id) {
         case 0: {
@@ -97,7 +97,7 @@ bool qp_lvgl_attach(painter_device_t device) {
     static lv_disp_draw_buf_t draw_buf;
     // Allocate a buffer for 1/10 screen size
     const size_t count_required   = driver->panel_width * driver->panel_height / 10;
-    void *       new_color_buffer = realloc(color_buffer, sizeof(lv_color_t) * count_required);
+    void        *new_color_buffer = realloc(color_buffer, sizeof(lv_color_t) * count_required);
     if (!new_color_buffer) {
         qp_dprintf("qp_lvgl_attach: fail (could not set up memory buffer)\n");
         qp_lvgl_detach();

quantum/painter/qp_comms.c

@@ -50,7 +50,7 @@ uint32_t qp_comms_send(painter_device_t device, const void *data, uint32_t byte_
 // Comms APIs that use a D/C pin
 
 bool qp_comms_command(painter_device_t device, uint8_t cmd) {
-    painter_driver_t *                   driver       = (painter_driver_t *)device;
+    painter_driver_t                    *driver       = (painter_driver_t *)device;
     painter_comms_with_command_vtable_t *comms_vtable = (painter_comms_with_command_vtable_t *)driver->comms_vtable;
     return comms_vtable->send_command(device, cmd);
 }
@@ -66,7 +66,7 @@ uint32_t qp_comms_command_databuf(painter_device_t device, uint8_t cmd, const vo
 }
 
 bool qp_comms_bulk_command_sequence(painter_device_t device, const uint8_t *sequence, size_t sequence_len) {
-    painter_driver_t *                   driver       = (painter_driver_t *)device;
+    painter_driver_t                    *driver       = (painter_driver_t *)device;
     painter_comms_with_command_vtable_t *comms_vtable = (painter_comms_with_command_vtable_t *)driver->comms_vtable;
     return comms_vtable->bulk_command_sequence(device, sequence, sequence_len);
 }

quantum/painter/qp_draw_text.c

@@ -343,14 +343,14 @@ typedef struct code_point_iter_drawglyph_state_t {
     int16_t                           xpos;
     int16_t                           ypos;
     qp_internal_byte_input_callback   input_callback;
-    qp_internal_byte_input_state_t *  input_state;
+    qp_internal_byte_input_state_t   *input_state;
     qp_internal_pixel_output_state_t *output_state;
 } code_point_iter_drawglyph_state_t;
 
 // Codepoint handler callback: drawing
 static inline bool qp_font_code_point_handler_drawglyph(qff_font_handle_t *qff_font, uint32_t code_point, uint8_t width, uint8_t height, void *cb_arg) {
     code_point_iter_drawglyph_state_t *state  = (code_point_iter_drawglyph_state_t *)cb_arg;
-    painter_driver_t *                 driver = (painter_driver_t *)state->device;
+    painter_driver_t                  *driver = (painter_driver_t *)state->device;
 
     // Reset the input state's RLE mode -- the stream should already be correctly positioned by qp_iterate_code_points()
     state->input_state->rle.mode = MARKER_BYTE; // ignored if not using RLE

quantum/painter/qp_internal_driver.h

@@ -60,7 +60,7 @@ typedef struct painter_comms_with_command_vtable_t {
 
 typedef struct painter_driver_t {
     const painter_driver_vtable_t *driver_vtable;
-    const painter_comms_vtable_t * comms_vtable;
+    const painter_comms_vtable_t  *comms_vtable;
 
     // Flag signifying if validation was successful
     bool validate_ok;

quantum/painter/qp_stream.h

@@ -62,7 +62,7 @@ typedef struct qp_stream_t {
 
 typedef struct qp_memory_stream_t {
     qp_stream_t base;
-    uint8_t *   buffer;
+    uint8_t    *buffer;
     int32_t     length;
     int32_t     position;
     bool        is_eof;
@@ -77,7 +77,7 @@ qp_memory_stream_t qp_make_memory_stream(void *buffer, int32_t length);
 
 typedef struct qp_file_stream_t {
     qp_stream_t base;
-    FILE *      file;
+    FILE       *file;
 } qp_file_stream_t;
 
 qp_file_stream_t qp_make_file_stream(FILE *f);

quantum/process_keycode/process_autocorrect.c

@@ -309,7 +309,7 @@ bool process_autocorrect(uint16_t keycode, keyrecord_t *record) {
 
         if (code & 128) { // A typo was found! Apply autocorrect.
             const uint8_t backspaces = (code & 63) + !record->event.pressed;
-            const char *  changes    = (const char *)(autocorrect_data + state + 1);
+            const char   *changes    = (const char *)(autocorrect_data + state + 1);
 
             /* Gather info about the typo'd word
              *

quantum/process_keycode/process_combo.c

@@ -225,7 +225,7 @@ static inline void dump_key_buffer(void) {
         key_buffer_next = key_buffer_i + 1;
 
         queued_record_t *qrecord = &key_buffer[key_buffer_i];
-        keyrecord_t *    record  = &qrecord->record;
+        keyrecord_t     *record  = &qrecord->record;
 
         if (IS_NOEVENT(record->event)) {
             continue;
@@ -318,14 +318,14 @@ void apply_combo(uint16_t combo_index, combo_t *combo) {
 #if defined(EXTRA_EXTRA_LONG_COMBOS)
     uint32_t state = 0;
 #elif defined(EXTRA_LONG_COMBOS)
-    uint16_t state         = 0;
+    uint16_t state = 0;
 #else
     uint8_t state = 0;
 #endif
 
     for (uint8_t key_buffer_i = 0; key_buffer_i < key_buffer_size; key_buffer_i++) {
         queued_record_t *qrecord = &key_buffer[key_buffer_i];
-        keyrecord_t *    record  = &qrecord->record;
+        keyrecord_t     *record  = &qrecord->record;
         uint16_t         keycode = qrecord->keycode;
 
         uint8_t  key_count = 0;
@@ -361,7 +361,7 @@ static inline void apply_combos(void) {
     // Apply all buffered normal combos.
     for (uint8_t i = combo_buffer_read; i != combo_buffer_write; INCREMENT_MOD(i)) {
         queued_combo_t *buffered_combo = &combo_buffer[i];
-        combo_t *       combo          = combo_get(buffered_combo->combo_index);
+        combo_t        *combo          = combo_get(buffered_combo->combo_index);
 
 #ifdef COMBO_MUST_TAP_PER_COMBO
         if (get_combo_must_tap(buffered_combo->combo_index, combo)) {
@@ -466,7 +466,7 @@ static combo_key_action_t process_single_combo(combo_t *combo, uint16_t keycode,
                 combo_t *drop = NULL;
                 for (uint8_t combo_buffer_i = combo_buffer_read; combo_buffer_i != combo_buffer_write; INCREMENT_MOD(combo_buffer_i)) {
                     queued_combo_t *qcombo         = &combo_buffer[combo_buffer_i];
-                    combo_t *       buffered_combo = combo_get(qcombo->combo_index);
+                    combo_t        *buffered_combo = combo_get(qcombo->combo_index);
 
                     if ((drop = overlaps(buffered_combo, combo))) {
                         DISABLE_COMBO(drop);
@@ -574,8 +574,8 @@ bool process_combo(uint16_t keycode, keyrecord_t *record) {
     /* Only check keycodes from one layer. */
     keycode = keymap_key_to_keycode(COMBO_ONLY_FROM_LAYER, record->event.key);
 #else
-    uint8_t  highest_layer = get_highest_layer(layer_state | default_layer_state);
-    uint8_t  ref_layer     = combo_ref_from_layer(highest_layer);
+    uint8_t highest_layer = get_highest_layer(layer_state | default_layer_state);
+    uint8_t ref_layer     = combo_ref_from_layer(highest_layer);
     if (ref_layer != highest_layer) {
         keycode = keymap_key_to_keycode(ref_layer, record->event.key);
     }

quantum/process_keycode/process_combo.h

@@ -45,8 +45,8 @@ typedef struct combo_t {
 #ifdef EXTRA_SHORT_COMBOS
     uint8_t state;
 #else
-    bool     disabled;
-    bool     active;
+    bool disabled;
+    bool active;
 #    if defined(EXTRA_EXTRA_LONG_COMBOS)
     uint32_t state;
 #    elif defined(EXTRA_LONG_COMBOS)
@@ -57,10 +57,8 @@ typedef struct combo_t {
 #endif
 } combo_t;
 
-#define COMBO(ck, ca) \
-    { .keys = &(ck)[0], .keycode = (ca) }
-#define COMBO_ACTION(ck) \
-    { .keys = &(ck)[0] }
+#define COMBO(ck, ca) {.keys = &(ck)[0], .keycode = (ca)}
+#define COMBO_ACTION(ck) {.keys = &(ck)[0]}
 
 #define COMBO_END 0
 #ifndef COMBO_TERM

quantum/process_keycode/process_key_lock.c

@@ -20,7 +20,7 @@
 
 #define BV_64(shift) (((uint64_t)1) << (shift))
 #define GET_KEY_ARRAY(code) (((code) < 0x40) ? key_state[0] : ((code) < 0x80) ? key_state[1] : ((code) < 0xC0) ? key_state[2] : key_state[3])
-#define GET_CODE_INDEX(code) (((code) < 0x40) ? (code) : ((code) < 0x80) ? (code)-0x40 : ((code) < 0xC0) ? (code)-0x80 : (code)-0xC0)
+#define GET_CODE_INDEX(code) (((code) < 0x40) ? (code) : ((code) < 0x80) ? (code) - 0x40 : ((code) < 0xC0) ? (code) - 0x80 : (code) - 0xC0)
 #define KEY_STATE(code) (GET_KEY_ARRAY(code) & BV_64(GET_CODE_INDEX(code))) == BV_64(GET_CODE_INDEX(code))
 #define SET_KEY_ARRAY_STATE(code, val) \
     do {                               \

quantum/process_keycode/process_key_override.c

@@ -39,7 +39,8 @@
 #    define key_override_printf dprintf
 #else
 #    define key_override_printf(str, ...) \
-        {}
+        {                                 \
+        }
 #endif
 
 // Helpers

quantum/process_keycode/process_tap_dance.h

@@ -57,23 +57,41 @@ typedef struct {
     void (*layer_function)(uint8_t);
 } tap_dance_dual_role_t;
 
-#define ACTION_TAP_DANCE_DOUBLE(kc1, kc2) \
-    { .fn = {tap_dance_pair_on_each_tap, tap_dance_pair_finished, tap_dance_pair_reset, NULL}, .user_data = (void *)&((tap_dance_pair_t){kc1, kc2}), }
-
-#define ACTION_TAP_DANCE_LAYER_MOVE(kc, layer) \
-    { .fn = {tap_dance_dual_role_on_each_tap, tap_dance_dual_role_finished, tap_dance_dual_role_reset, NULL}, .user_data = (void *)&((tap_dance_dual_role_t){kc, layer, layer_move}), }
-
-#define ACTION_TAP_DANCE_LAYER_TOGGLE(kc, layer) \
-    { .fn = {NULL, tap_dance_dual_role_finished, tap_dance_dual_role_reset, NULL}, .user_data = (void *)&((tap_dance_dual_role_t){kc, layer, layer_invert}), }
-
-#define ACTION_TAP_DANCE_FN(user_fn) \
-    { .fn = {NULL, user_fn, NULL, NULL}, .user_data = NULL, }
+#define ACTION_TAP_DANCE_DOUBLE(kc1, kc2)                                                               \
+    {                                                                                                   \
+        .fn        = {tap_dance_pair_on_each_tap, tap_dance_pair_finished, tap_dance_pair_reset, NULL}, \
+        .user_data = (void *)&((tap_dance_pair_t){kc1, kc2}),                                           \
+    }
+
+#define ACTION_TAP_DANCE_LAYER_MOVE(kc, layer)                                                                         \
+    {                                                                                                                  \
+        .fn        = {tap_dance_dual_role_on_each_tap, tap_dance_dual_role_finished, tap_dance_dual_role_reset, NULL}, \
+        .user_data = (void *)&((tap_dance_dual_role_t){kc, layer, layer_move}),                                        \
+    }
+
+#define ACTION_TAP_DANCE_LAYER_TOGGLE(kc, layer)                                            \
+    {                                                                                       \
+        .fn        = {NULL, tap_dance_dual_role_finished, tap_dance_dual_role_reset, NULL}, \
+        .user_data = (void *)&((tap_dance_dual_role_t){kc, layer, layer_invert}),           \
+    }
+
+#define ACTION_TAP_DANCE_FN(user_fn)              \
+    {                                             \
+        .fn        = {NULL, user_fn, NULL, NULL}, \
+        .user_data = NULL,                        \
+    }
 
 #define ACTION_TAP_DANCE_FN_ADVANCED(user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_dance_reset) \
-    { .fn = {user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_dance_reset, NULL}, .user_data = NULL, }
+    {                                                                                                        \
+        .fn        = {user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_dance_reset, NULL},         \
+        .user_data = NULL,                                                                                   \
+    }
 
 #define ACTION_TAP_DANCE_FN_ADVANCED_WITH_RELEASE(user_fn_on_each_tap, user_fn_on_each_release, user_fn_on_dance_finished, user_fn_on_dance_reset) \
-    { .fn = {user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_dance_reset, user_fn_on_each_release}, .user_data = NULL, }
+    {                                                                                                                                              \
+        .fn        = {user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_dance_reset, user_fn_on_each_release},                            \
+        .user_data = NULL,                                                                                                                         \
+    }
 
 #define TD_INDEX(code) QK_TAP_DANCE_GET_INDEX(code)
 #define TAP_DANCE_KEYCODE(state) TD(((tap_dance_action_t *)state) - tap_dance_actions)

quantum/quantum_keycodes.h

@@ -39,7 +39,7 @@
 
 // Generic decoding for the whole QK_MODS range
 #define QK_MODS_GET_MODS(kc) (((kc) >> 8) & 0x1F)
-#define QK_MODS_GET_BASIC_KEYCODE(kc) ((kc)&0xFF)
+#define QK_MODS_GET_BASIC_KEYCODE(kc) ((kc) & 0xFF)
 
 // Modified keycodes
 #define LCTL(kc) (QK_LCTL | (kc))
@@ -90,37 +90,37 @@
 #define MEH(kc) (QK_LCTL | QK_LSFT | QK_LALT | (kc))
 
 // GOTO layer - 32 layer max
-#define TO(layer) (QK_TO | ((layer)&0x1F))
-#define QK_TO_GET_LAYER(kc) ((kc)&0x1F)
+#define TO(layer) (QK_TO | ((layer) & 0x1F))
+#define QK_TO_GET_LAYER(kc) ((kc) & 0x1F)
 
 // Momentary switch layer - 32 layer max
-#define MO(layer) (QK_MOMENTARY | ((layer)&0x1F))
-#define QK_MOMENTARY_GET_LAYER(kc) ((kc)&0x1F)
+#define MO(layer) (QK_MOMENTARY | ((layer) & 0x1F))
+#define QK_MOMENTARY_GET_LAYER(kc) ((kc) & 0x1F)
 
 // Set default layer - 32 layer max
-#define DF(layer) (QK_DEF_LAYER | ((layer)&0x1F))
-#define QK_DEF_LAYER_GET_LAYER(kc) ((kc)&0x1F)
+#define DF(layer) (QK_DEF_LAYER | ((layer) & 0x1F))
+#define QK_DEF_LAYER_GET_LAYER(kc) ((kc) & 0x1F)
 
 // Set persistent default layer - 32 layer max
-#define PDF(layer) (QK_PERSISTENT_DEF_LAYER | ((layer)&0x1F))
-#define QK_PERSISTENT_DEF_LAYER_GET_LAYER(kc) ((kc)&0x1F)
+#define PDF(layer) (QK_PERSISTENT_DEF_LAYER | ((layer) & 0x1F))
+#define QK_PERSISTENT_DEF_LAYER_GET_LAYER(kc) ((kc) & 0x1F)
 
 // Toggle to layer - 32 layer max
-#define TG(layer) (QK_TOGGLE_LAYER | ((layer)&0x1F))
-#define QK_TOGGLE_LAYER_GET_LAYER(kc) ((kc)&0x1F)
+#define TG(layer) (QK_TOGGLE_LAYER | ((layer) & 0x1F))
+#define QK_TOGGLE_LAYER_GET_LAYER(kc) ((kc) & 0x1F)
 
 // One-shot layer - 32 layer max
-#define OSL(layer) (QK_ONE_SHOT_LAYER | ((layer)&0x1F))
-#define QK_ONE_SHOT_LAYER_GET_LAYER(kc) ((kc)&0x1F)
+#define OSL(layer) (QK_ONE_SHOT_LAYER | ((layer) & 0x1F))
+#define QK_ONE_SHOT_LAYER_GET_LAYER(kc) ((kc) & 0x1F)
 
 // L-ayer M-od: Momentary switch layer with modifiers active - 16 layer max
-#define LM(layer, mod) (QK_LAYER_MOD | (((layer)&0xF) << 5) | ((mod)&0x1F))
+#define LM(layer, mod) (QK_LAYER_MOD | (((layer) & 0xF) << 5) | ((mod) & 0x1F))
 #define QK_LAYER_MOD_GET_LAYER(kc) (((kc) >> 5) & 0xF)
-#define QK_LAYER_MOD_GET_MODS(kc) ((kc)&0x1F)
+#define QK_LAYER_MOD_GET_MODS(kc) ((kc) & 0x1F)
 
 // One-shot mod
-#define OSM(mod) (QK_ONE_SHOT_MOD | ((mod)&0x1F))
-#define QK_ONE_SHOT_MOD_GET_MODS(kc) ((kc)&0x1F)
+#define OSM(mod) (QK_ONE_SHOT_MOD | ((mod) & 0x1F))
+#define QK_ONE_SHOT_MOD_GET_MODS(kc) ((kc) & 0x1F)
 
 #define OS_LCTL OSM(MOD_LCTL)
 #define OS_LSFT OSM(MOD_LSFT)
@@ -158,18 +158,18 @@
 #define OS_HYPR OSM(MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI)
 
 // Layer tap-toggle - 32 layer max
-#define TT(layer) (QK_LAYER_TAP_TOGGLE | ((layer)&0x1F))
-#define QK_LAYER_TAP_TOGGLE_GET_LAYER(kc) ((kc)&0x1F)
+#define TT(layer) (QK_LAYER_TAP_TOGGLE | ((layer) & 0x1F))
+#define QK_LAYER_TAP_TOGGLE_GET_LAYER(kc) ((kc) & 0x1F)
 
 // L-ayer, T-ap - 256 keycode max, 16 layer max
-#define LT(layer, kc) (QK_LAYER_TAP | (((layer)&0xF) << 8) | ((kc)&0xFF))
+#define LT(layer, kc) (QK_LAYER_TAP | (((layer) & 0xF) << 8) | ((kc) & 0xFF))
 #define QK_LAYER_TAP_GET_LAYER(kc) (((kc) >> 8) & 0xF)
-#define QK_LAYER_TAP_GET_TAP_KEYCODE(kc) ((kc)&0xFF)
+#define QK_LAYER_TAP_GET_TAP_KEYCODE(kc) ((kc) & 0xFF)
 
 // M-od, T-ap - 256 keycode max
-#define MT(mod, kc) (QK_MOD_TAP | (((mod)&0x1F) << 8) | ((kc)&0xFF))
+#define MT(mod, kc) (QK_MOD_TAP | (((mod) & 0x1F) << 8) | ((kc) & 0xFF))
 #define QK_MOD_TAP_GET_MODS(kc) (((kc) >> 8) & 0x1F)
-#define QK_MOD_TAP_GET_TAP_KEYCODE(kc) ((kc)&0xFF)
+#define QK_MOD_TAP_GET_TAP_KEYCODE(kc) ((kc) & 0xFF)
 
 // Mod-Tap shortcuts
 #define LCTL_T(kc) MT(MOD_LCTL, kc)
@@ -230,23 +230,23 @@
 // Unicode aliases
 // UNICODE_ENABLE - Allows Unicode input up to 0x7FFF
 #define UC(c) (QK_UNICODE | (c))
-#define QK_UNICODE_GET_CODE_POINT(kc) ((kc)&0x7FFF)
+#define QK_UNICODE_GET_CODE_POINT(kc) ((kc) & 0x7FFF)
 
 // UNICODEMAP_ENABLE - Allows Unicode input up to 0x10FFFF, requires unicode_map
-#define UM(i) (QK_UNICODEMAP | ((i)&0x3FFF))
-#define QK_UNICODEMAP_GET_INDEX(kc) ((kc)&0x3FFF)
+#define UM(i) (QK_UNICODEMAP | ((i) & 0x3FFF))
+#define QK_UNICODEMAP_GET_INDEX(kc) ((kc) & 0x3FFF)
 
-#define UP(i, j) (QK_UNICODEMAP_PAIR | ((i)&0x7F) | (((j)&0x7F) << 7)) // 127 max i and j
-#define QK_UNICODEMAP_PAIR_GET_UNSHIFTED_INDEX(kc) ((kc)&0x7F)
+#define UP(i, j) (QK_UNICODEMAP_PAIR | ((i) & 0x7F) | (((j) & 0x7F) << 7)) // 127 max i and j
+#define QK_UNICODEMAP_PAIR_GET_UNSHIFTED_INDEX(kc) ((kc) & 0x7F)
 #define QK_UNICODEMAP_PAIR_GET_SHIFTED_INDEX(kc) (((kc) >> 7) & 0x7F)
 
 // Swap Hands
-#define SH_T(kc) (QK_SWAP_HANDS | ((kc)&0xFF))
-#define QK_SWAP_HANDS_GET_TAP_KEYCODE(kc) ((kc)&0xFF)
+#define SH_T(kc) (QK_SWAP_HANDS | ((kc) & 0xFF))
+#define QK_SWAP_HANDS_GET_TAP_KEYCODE(kc) ((kc) & 0xFF)
 
 // Tap dance
-#define TD(i) (QK_TAP_DANCE | ((i)&0xFF))
-#define QK_TAP_DANCE_GET_INDEX(kc) ((kc)&0xFF)
+#define TD(i) (QK_TAP_DANCE | ((i) & 0xFF))
+#define QK_TAP_DANCE_GET_INDEX(kc) ((kc) & 0xFF)
 
 // MIDI aliases
 #define MIDI_TONE_MIN QK_MIDI_NOTE_C_0

quantum/rgblight/rgblight.c

@@ -1381,7 +1381,7 @@ void rgblight_effect_twinkle(animation_status_t *anim) {
 
     for (uint8_t i = 0; i < rgblight_ranges.effect_num_leds; i++) {
         TwinkleState *t = &(led_twinkle_state[i]);
-        hsv_t *       c = &(t->hsv);
+        hsv_t        *c = &(t->hsv);
 
         if (!random_color) {
             c->h = rgblight_config.hue;

quantum/rgblight/rgblight.h

@@ -186,8 +186,7 @@ typedef struct {
 #    define RGBLIGHT_USE_TIMER
 
 #    define RGBLIGHT_END_SEGMENT_INDEX (255)
-#    define RGBLIGHT_END_SEGMENTS \
-        { RGBLIGHT_END_SEGMENT_INDEX, 0, 0, 0 }
+#    define RGBLIGHT_END_SEGMENTS {RGBLIGHT_END_SEGMENT_INDEX, 0, 0, 0}
 #    ifndef RGBLIGHT_MAX_LAYERS
 #        define RGBLIGHT_MAX_LAYERS 8
 #    endif
@@ -202,10 +201,8 @@ typedef uint32_t rgblight_layer_mask_t;
 #    else
 #        error invalid RGBLIGHT_MAX_LAYERS value (must be <= 32)
 #    endif
-#    define RGBLIGHT_LAYER_SEGMENTS(...) \
-        { __VA_ARGS__, RGBLIGHT_END_SEGMENTS }
-#    define RGBLIGHT_LAYERS_LIST(...) \
-        { __VA_ARGS__, NULL }
+#    define RGBLIGHT_LAYER_SEGMENTS(...) {__VA_ARGS__, RGBLIGHT_END_SEGMENTS}
+#    define RGBLIGHT_LAYERS_LIST(...) {__VA_ARGS__, NULL}
 
 // Get/set enabled rgblight layers
 void rgblight_set_layer_state(uint8_t layer, bool enabled);

quantum/secure.c

@@ -14,10 +14,7 @@
 #endif
 
 #ifndef SECURE_UNLOCK_SEQUENCE
-#    define SECURE_UNLOCK_SEQUENCE \
-        {                          \
-            { 0, 0 }               \
-        }
+#    define SECURE_UNLOCK_SEQUENCE {{0, 0}}
 #endif
 
 static secure_status_t secure_status = SECURE_LOCKED;

quantum/split_common/split_util.c

@@ -167,7 +167,7 @@ __attribute__((weak)) bool is_keyboard_left_impl(void) {
 #            pragma message "Faking EE_HANDS for right hand"
     const bool should_be_left = false;
 #        endif
-    bool       is_left        = eeconfig_read_handedness();
+    bool is_left = eeconfig_read_handedness();
     if (is_left != should_be_left) {
         eeconfig_update_handedness(should_be_left);
     }

quantum/split_common/transactions.c

@@ -73,16 +73,13 @@
 
 #define sizeof_member(type, member) sizeof(((type *)NULL)->member)
 
-#define trans_initiator2target_initializer_cb(member, cb) \
-    { sizeof_member(split_shared_memory_t, member), offsetof(split_shared_memory_t, member), 0, 0, cb }
+#define trans_initiator2target_initializer_cb(member, cb) {sizeof_member(split_shared_memory_t, member), offsetof(split_shared_memory_t, member), 0, 0, cb}
 #define trans_initiator2target_initializer(member) trans_initiator2target_initializer_cb(member, NULL)
 
-#define trans_target2initiator_initializer_cb(member, cb) \
-    { 0, 0, sizeof_member(split_shared_memory_t, member), offsetof(split_shared_memory_t, member), cb }
+#define trans_target2initiator_initializer_cb(member, cb) {0, 0, sizeof_member(split_shared_memory_t, member), offsetof(split_shared_memory_t, member), cb}
 #define trans_target2initiator_initializer(member) trans_target2initiator_initializer_cb(member, NULL)
 
-#define trans_initiator2target_cb(cb) \
-    { 0, 0, 0, 0, cb }
+#define trans_initiator2target_cb(cb) {0, 0, 0, 0, cb}
 
 #define transport_write(id, data, length) transport_execute_transaction(id, data, length, NULL, 0)
 #define transport_read(id, data, length) transport_execute_transaction(id, NULL, 0, data, length)

quantum/util.h

@@ -24,7 +24,7 @@
  * @brief Computes the rounded up result of a division of two integers at
  * compile time.
  */
-#    define CEILING(dividend, divisor) (((dividend) + (divisor)-1) / (divisor))
+#    define CEILING(dividend, divisor) (((dividend) + (divisor) - 1) / (divisor))
 #endif
 
 #if !defined(IS_ARRAY)

quantum/via.c

@@ -68,7 +68,7 @@
 // Can be called in an overriding via_init_kb() to test if keyboard level code usage of
 // EEPROM is invalid and use/save defaults.
 bool via_eeprom_is_valid(void) {
-    char *  p      = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
+    char   *p      = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
     uint8_t magic0 = ((p[2] & 0x0F) << 4) | (p[3] & 0x0F);
     uint8_t magic1 = ((p[5] & 0x0F) << 4) | (p[6] & 0x0F);
     uint8_t magic2 = ((p[8] & 0x0F) << 4) | (p[9] & 0x0F);
@@ -85,7 +85,7 @@ bool via_eeprom_is_valid(void) {
 // Keyboard level code (eg. via_init_kb()) should not call this
 void via_eeprom_set_valid(bool valid) {
     if (valid) {
-        char *  p      = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
+        char   *p      = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
         uint8_t magic0 = ((p[2] & 0x0F) << 4) | (p[3] & 0x0F);
         uint8_t magic1 = ((p[5] & 0x0F) << 4) | (p[6] & 0x0F);
         uint8_t magic2 = ((p[8] & 0x0F) << 4) | (p[9] & 0x0F);

quantum/wear_leveling/wear_leveling.c

@@ -358,7 +358,7 @@ static wear_leveling_status_t wear_leveling_append_raw(backing_store_int_t value
  * @return true if consolidation occurred
  */
 static wear_leveling_status_t wear_leveling_write_raw_multibyte(uint32_t address, const void *value, size_t length) {
-    const uint8_t *   p   = value;
+    const uint8_t    *p   = value;
     write_log_entry_t log = LOG_ENTRY_MAKE_MULTIBYTE(address, length);
     for (size_t i = 0; i < length; ++i) {
         log.raw8[3 + i] = p[i];
@@ -415,7 +415,7 @@ static wear_leveling_status_t wear_leveling_write_raw_multibyte(uint32_t address
  * Handles the actual writing of logical data into the write log section of the backing store.
  */
 static wear_leveling_status_t wear_leveling_write_raw(uint32_t address, const void *value, size_t length) {
-    const uint8_t *        p         = value;
+    const uint8_t         *p         = value;
     size_t                 remaining = length;
     wear_leveling_status_t status    = WEAR_LEVELING_SUCCESS;
     while (remaining > 0) {
@@ -555,7 +555,7 @@ static wear_leveling_status_t wear_leveling_playback_log(void) {
                     if (!ok) {
                         wl_dprintf("Failed to load from backing store, skipping playback of write log\n");
                         cancel_playback = true;
-                        status = WEAR_LEVELING_FAILED;
+                        status          = WEAR_LEVELING_FAILED;
                         break;
                     }
                     address += (BACKING_STORE_WRITE_SIZE);

tests/tap_hold_configurations/retro_tapping/config.h

@@ -20,5 +20,4 @@
 
 #define RETRO_TAPPING
 #define DUMMY_MOD_NEUTRALIZER_KEYCODE KC_RIGHT_CTRL
-#define MODS_TO_NEUTRALIZE \
-    { MOD_BIT(KC_LEFT_GUI) }
+#define MODS_TO_NEUTRALIZE {MOD_BIT(KC_LEFT_GUI)}

tmk_core/protocol/chibios/usb_driver.c

@@ -186,7 +186,7 @@ void usb_endpoint_out_configure_cb(usb_endpoint_out_t *endpoint) {
 void usb_endpoint_in_tx_complete_cb(USBDriver *usbp, usbep_t ep) {
     usb_endpoint_in_t *endpoint = usbp->in_params[ep - 1U];
     size_t             n;
-    uint8_t *          buffer;
+    uint8_t           *buffer;
 
     if (endpoint == NULL) {
         return;

tmk_core/protocol/chibios/usb_endpoints.c

@@ -68,7 +68,7 @@ usb_endpoint_in_t usb_endpoints_in[USB_ENDPOINT_IN_COUNT] = {
 #    if defined(USB_ENDPOINTS_ARE_REORDERABLE)
     [USB_ENDPOINT_IN_CONSOLE] = QMK_USB_ENDPOINT_IN_SHARED(USB_EP_MODE_TYPE_INTR, CONSOLE_EPSIZE, CONSOLE_IN_EPNUM, CONSOLE_IN_CAPACITY, NULL, QMK_USB_REPORT_STORAGE_DEFAULT(CONSOLE_EPSIZE)),
 #    else
-    [USB_ENDPOINT_IN_CONSOLE]  = QMK_USB_ENDPOINT_IN(USB_EP_MODE_TYPE_INTR, CONSOLE_EPSIZE, CONSOLE_IN_EPNUM, CONSOLE_IN_CAPACITY, NULL, QMK_USB_REPORT_STORAGE_DEFAULT(CONSOLE_EPSIZE)),
+    [USB_ENDPOINT_IN_CONSOLE] = QMK_USB_ENDPOINT_IN(USB_EP_MODE_TYPE_INTR, CONSOLE_EPSIZE, CONSOLE_IN_EPNUM, CONSOLE_IN_CAPACITY, NULL, QMK_USB_REPORT_STORAGE_DEFAULT(CONSOLE_EPSIZE)),
 #    endif
 #endif
 
@@ -76,7 +76,7 @@ usb_endpoint_in_t usb_endpoints_in[USB_ENDPOINT_IN_COUNT] = {
 #    if defined(USB_ENDPOINTS_ARE_REORDERABLE)
     [USB_ENDPOINT_IN_RAW] = QMK_USB_ENDPOINT_IN_SHARED(USB_EP_MODE_TYPE_INTR, RAW_EPSIZE, RAW_IN_EPNUM, RAW_IN_CAPACITY, NULL, QMK_USB_REPORT_STORAGE_DEFAULT(RAW_EPSIZE)),
 #    else
-    [USB_ENDPOINT_IN_RAW]      = QMK_USB_ENDPOINT_IN(USB_EP_MODE_TYPE_INTR, RAW_EPSIZE, RAW_IN_EPNUM, RAW_IN_CAPACITY, NULL, QMK_USB_REPORT_STORAGE_DEFAULT(RAW_EPSIZE)),
+    [USB_ENDPOINT_IN_RAW] = QMK_USB_ENDPOINT_IN(USB_EP_MODE_TYPE_INTR, RAW_EPSIZE, RAW_IN_EPNUM, RAW_IN_CAPACITY, NULL, QMK_USB_REPORT_STORAGE_DEFAULT(RAW_EPSIZE)),
 #    endif
 #endif
 
@@ -84,7 +84,7 @@ usb_endpoint_in_t usb_endpoints_in[USB_ENDPOINT_IN_COUNT] = {
 #    if defined(USB_ENDPOINTS_ARE_REORDERABLE)
     [USB_ENDPOINT_IN_MIDI] = QMK_USB_ENDPOINT_IN_SHARED(USB_EP_MODE_TYPE_BULK, MIDI_STREAM_EPSIZE, MIDI_STREAM_IN_EPNUM, MIDI_STREAM_IN_CAPACITY, NULL, NULL),
 #    else
-    [USB_ENDPOINT_IN_MIDI]     = QMK_USB_ENDPOINT_IN(USB_EP_MODE_TYPE_BULK, MIDI_STREAM_EPSIZE, MIDI_STREAM_IN_EPNUM, MIDI_STREAM_IN_CAPACITY, NULL, NULL),
+    [USB_ENDPOINT_IN_MIDI] = QMK_USB_ENDPOINT_IN(USB_EP_MODE_TYPE_BULK, MIDI_STREAM_EPSIZE, MIDI_STREAM_IN_EPNUM, MIDI_STREAM_IN_CAPACITY, NULL, NULL),
 #    endif
 #endif
 

tmk_core/protocol/chibios/usb_main.c

@@ -80,7 +80,7 @@ static const USBDescriptor *usb_get_descriptor_cb(USBDriver *usbp, uint8_t dtype
 
     static USBDescriptor descriptor;
     descriptor.ud_string = NULL;
-    descriptor.ud_size   = get_usb_descriptor(setup->wValue.word, setup->wIndex, setup->wLength, (const void **const) & descriptor.ud_string);
+    descriptor.ud_size   = get_usb_descriptor(setup->wValue.word, setup->wIndex, setup->wLength, (const void **const)&descriptor.ud_string);
 
     if (descriptor.ud_string == NULL) {
         return NULL;

tmk_core/protocol/usb_descriptor.h

@@ -223,7 +223,7 @@ enum usb_endpoints {
 #    ifdef USB_ENDPOINTS_ARE_REORDERABLE
 #        define RAW_OUT_EPNUM RAW_IN_EPNUM
 #    else
-    RAW_OUT_EPNUM         = NEXT_EPNUM,
+    RAW_OUT_EPNUM = NEXT_EPNUM,
 #    endif
 #endif
 
@@ -250,7 +250,7 @@ enum usb_endpoints {
 #    ifdef USB_ENDPOINTS_ARE_REORDERABLE
 #        define CDC_OUT_EPNUM CDC_IN_EPNUM
 #    else
-    CDC_OUT_EPNUM         = NEXT_EPNUM,
+    CDC_OUT_EPNUM = NEXT_EPNUM,
 #    endif
 #endif