Merge remote-tracking branch 'origin/develop' into xap

keyboards/ploopyco/mouse/config.h

@@ -18,11 +18,6 @@
 
 #pragma once
 
-// These pins are not broken out, and cannot be used normally.
-// They are set as output and pulled high, by default
-#define UNUSABLE_PINS \
-    { B4, D6, F1, F5, F6, F7 }
-
 /* disable action features */
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
@@ -30,13 +25,7 @@
 
 // #define DEBUG_LED_PIN F7
 
-/* PMW33XX Settings */
-#define PMW33XX_CS_PIN B0
-
 #define ENCODER_BUTTON_COL 1
 #define ENCODER_BUTTON_ROW 0
 /* Custom encoder needs to specify just how many encoders we have */
 #define NUM_ENCODERS 1
-
-#define ENCODER_A_PINS { F0 }
-#define ENCODER_B_PINS { F4 }

keyboards/ploopyco/mouse/keyboard.json → keyboards/ploopyco/mouse/info.json

@@ -1,6 +1,6 @@
 {
     "keyboard_name": "Mouse",
-    "manufacturer": "PloopyCo",
+    "manufacturer": "Ploopy",
     "url": "www.ploopy.co",
     "maintainer": "drashna",
     "usb": {
@@ -9,6 +9,9 @@
         "device_version": "0.0.1",
         "max_power": 100
     },
+    "bootmagic": {
+        "matrix": [0, 3]
+    },
     "features": {
         "bootmagic": true,
         "extrakey": true,
@@ -17,28 +20,6 @@
         "pointing_device": true,
         "encoder": true
     },
-    "bootmagic": {
-        "matrix": [0, 3]
-    },
-    "ws2812": {
-        "pin": "B5"
-    },
-    "rgblight": {
-        "led_count": 4,
-        "max_brightness": 40,
-        "animations": {
-            "breathing": true,
-            "rainbow_mood": true,
-            "rainbow_swirl": true
-        }
-    },
-    "processor": "atmega32u4",
-    "bootloader": "atmel-dfu",
-    "matrix_pins": {
-        "direct": [
-            ["D4", "D2", "E6", "B6", "D7", "C6", "C7", "B7"]
-        ]
-    },
     "encoder": {
         "driver": "custom"
     },

keyboards/ploopyco/mouse/post_rules.mk

@@ -0,0 +1 @@
+POINTING_DEVICE_DRIVER = pmw3360

keyboards/ploopyco/mouse/readme.md

@@ -6,14 +6,14 @@ It's a DIY, QMK Powered Mouse!!!!
 
 
 * Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
-* Hardware Supported: ATMega32u4 8MHz(3.3v)  
+* Hardware Supported: ATMega32u4 8MHz(3.3v), Raspberry RP2040
 * Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco)
 
 Make example for this keyboard (after setting up your build environment):
 
     make ploopyco/mouse:default:flash
-    
-To jump to the bootloader, hold down "Button 4" (the "forward" button on the left side) 
+
+To jump to the bootloader, hold down "Button 4" (the "forward" button on the left side)
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 

keyboards/ploopyco/mouse/rev1_002/config.h

@@ -0,0 +1,33 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2020 Ploopy Corporation
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// These pins are not broken out, and cannot be used normally.
+// They are set as output and pulled high, by default
+#define UNUSABLE_PINS \
+    { B4, D6, F1, F5, F6, F7 }
+
+// If board has a debug LED, you can enable it by defining this
+// #define DEBUG_LED_PIN F7
+
+/* PMW33XX Settings */
+#define PMW33XX_CS_PIN B0
+
+#define ENCODER_A_PINS { F0 }
+#define ENCODER_B_PINS { F4 }

keyboards/ploopyco/mouse/rev1_002/keyboard.json

@@ -0,0 +1,21 @@
+{
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
+    "matrix_pins": {
+        "direct": [
+            ["D4", "D2", "E6", "B6", "D7", "C6", "C7", "B7"]
+        ]
+    },
+    "ws2812": {
+        "pin": "B5"
+    },
+    "rgblight": {
+        "led_count": 3,
+        "max_brightness": 40,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true
+        }
+    }
+}

keyboards/ploopyco/mouse/rev1_002/readme.md

@@ -0,0 +1,3 @@
+See the [main readme](../readme.md) for more details.
+
+This is for the R1.002 version of the Mouse. It's easily distinguishable from the R1.003+ versions of the Mouse because it has an ATmega32u4 on the board.

keyboards/ploopyco/mouse/rules.mk → keyboards/ploopyco/mouse/rev1_002/rules.mk

@@ -1,4 +1,2 @@
 # Processor frequency
 F_CPU = 8000000
-
-POINTING_DEVICE_DRIVER = pmw3360

keyboards/ploopyco/mouse/rev1_003/config.h

@@ -0,0 +1,32 @@
+/* Copyright 2024 Colin Lam (Ploopy Corporation)
+ * Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define UNUSABLE_PINS \
+    { GP1, GP3, GP4, GP6, GP8, GP10, GP11, GP16, GP18, GP20, GP25, GP27, GP29 }
+
+/* PMW3360 Settings */
+#define PMW33XX_LIFTOFF_DISTANCE 0x00
+#define PMW33XX_CS_PIN GP5
+#define SPI_SCK_PIN GP2
+#define SPI_MISO_PIN GP0
+#define SPI_MOSI_PIN GP7
+
+#define ENCODER_A_PINS { GP26 }
+#define ENCODER_B_PINS { GP28 }

keyboards/ploopyco/mouse/rev1_003/keyboard.json

@@ -0,0 +1,25 @@
+{
+    "processor": "RP2040",
+    "bootloader": "rp2040",
+    "usb": {
+        "device_version": "1.0.0"
+    },
+    "diode_direction": "COL2ROW",
+    "matrix_pins": {
+        "direct": [
+            ["GP15", "GP21", "GP23", "GP17", "GP19", "GP22", "GP14", "GP24"]
+        ]
+    },
+    "rgblight": {
+        "led_count": 1,
+        "max_brightness": 40,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true
+        }
+    },
+    "ws2812": {
+        "pin": "GP12"
+    }
+}

keyboards/ploopyco/mouse/rev1_003/readme.md

@@ -0,0 +1,3 @@
+See the [main readme](../readme.md) for more details.
+
+This is for the R1.003+ version of the Mouse. It's easily distinguishable from the previous versions of the Mouse because it has an RP2040 on the board.

keyboards/ploopyco/trackball/config.h

@@ -23,20 +23,11 @@
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
+/* PMW3360 settings */
 #define ROTATIONAL_TRANSFORM_ANGLE 20
-
-// If board has a debug LED, you can enable it by defining this
-// #define DEBUG_LED_PIN F7
-
-/* PMW33XX Settings */
-#define PMW33XX_CS_PIN             B0
 #define POINTING_DEVICE_INVERT_Y
 
-
 #define ENCODER_BUTTON_COL 1
 #define ENCODER_BUTTON_ROW 0
 /* Custom encoder needs to specify just how many encoders we have */
 #define NUM_ENCODERS 1
-
-#define ENCODER_A_PINS { F0 }
-#define ENCODER_B_PINS { F4 }

keyboards/ploopyco/trackball/info.json

@@ -1,6 +1,6 @@
 {
-    "keyboard_name": "Trackball",
-    "manufacturer": "PloopyCo",
+    "keyboard_name": "Classic Trackball",
+    "manufacturer": "Ploopy",
     "url": "www.ploopy.co",
     "maintainer": "drashna",
     "usb": {
@@ -12,7 +12,6 @@
     "bootmagic": {
         "matrix": [0, 3]
     },
-
     "features": {
         "bootmagic": true,
         "extrakey": true,

keyboards/ploopyco/trackball/post_rules.mk

@@ -0,0 +1 @@
+POINTING_DEVICE_DRIVER = pmw3360

keyboards/ploopyco/trackball/readme.md

@@ -1,27 +1,34 @@
-# Ploopyco Trackball
+# Ploopy Classic Trackball
 
-![Ploopyco Trackball](https://i.redd.it/j7z0y83txps31.jpg)
+![Ploopy Trackball](https://i.redd.it/j7z0y83txps31.jpg)
 
 It's a DIY, QMK Powered Trackball!!!!
 
-* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
-* Hardware Supported: ATMega32u4 8MHz(3.3v)  
+* Keyboard Maintainer: [Ploopy](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
+* Hardware Supported: ATMega32u4 8MHz(3.3v), Raspberry RP2040
 * Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make ploopyco/trackball/rev1:default:flash
+    make ploopyco/trackball/rev1_004:default:flash
     make ploopyco/trackball/rev1_005:default:flash
-    
-To jump to the bootloader, hold down "Button 4" (immediate right of the trackball) 
+    make ploopyco/trackball/rev1_007:default:flash
+
+To jump to the bootloader, hold down "Button 4" (immediate right of the trackball)
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
 ## Revisions
 
-There are two main revisions for the PloopyCo Trackball, everything up to 1.004, and 1.005-1.006.
+There are three main revisions for the Ploopy Classic Trackball:
+
+- Everything up to 1.004 (very rare)
+- Revision 1.005 and 1.006 (commonly sold between 2020 and 2024)
+- Revision 1.007 (first available in 2025)
+
+In the 1.005 revision, button four was changed from pin B5 to B6, and the debug LED pin was changed from F7 to B5.
 
-In the 1.005 revision, button for was changed from pin B5 to B6, and the debug LED pin was changed from F7 to B5. 
+In the 1.007 revision, the board was switched from an ATMega32u4 architecture to the Raspberry RP2040 architecture.
 
 The PCB should indicate which revision this is.
 

keyboards/ploopyco/trackball/rev1/config.h → keyboards/ploopyco/trackball/rev1_004/config.h

@@ -25,3 +25,9 @@
 
 // If board has a debug LED, you can enable it by defining this
 #define DEBUG_LED_PIN F7
+
+/* PMW33XX Settings */
+#define PMW33XX_CS_PIN             B0
+
+#define ENCODER_A_PINS { F0 }
+#define ENCODER_B_PINS { F4 }

keyboards/ploopyco/trackball/rev1_004/rules.mk

@@ -0,0 +1,2 @@
+# Processor frequency
+F_CPU = 8000000

keyboards/ploopyco/trackball/rev1_005/config.h

@@ -22,3 +22,12 @@
 // They are set as output and pulled high, by default
 #define UNUSABLE_PINS \
     { D1, D3, B4, B7, D6, C7, F6, F5, F3, F7 }
+
+// If board has a debug LED, you can enable it by defining this
+// #define DEBUG_LED_PIN F7
+
+/* PMW33XX Settings */
+#define PMW33XX_CS_PIN B0
+
+#define ENCODER_A_PINS { F0 }
+#define ENCODER_B_PINS { F4 }

keyboards/ploopyco/trackball/rev1_005/readme.md

@@ -1,3 +1,3 @@
-See the [main readme](../readme.md) for more details. 
+See the [main readme](../readme.md) for more details.
 
-This is just the rev 1.005+ trackball
+This is for the R1.005-R1.006 version of the Classic. It's easily distinguishable from the R1.007+ versions of the Classic because it has an ATmega32u4 on the board.

keyboards/ploopyco/trackball/rev1_005/rules.mk

@@ -0,0 +1,2 @@
+# Processor frequency
+F_CPU = 8000000

keyboards/ploopyco/trackball/rev1_007/config.h

@@ -0,0 +1,32 @@
+/* Copyright 2024 Colin Lam (Ploopy Corporation)
+ * Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define UNUSABLE_PINS \
+    { GP1, GP3, GP4, GP6, GP8, GP10, GP11, GP14, GP16, GP18, GP20, GP22, GP24, GP25, GP27, GP29 }
+
+/* PMW3360 Settings */
+#define PMW33XX_LIFTOFF_DISTANCE 0x00
+#define PMW33XX_CS_PIN GP5
+#define SPI_SCK_PIN GP2
+#define SPI_MISO_PIN GP0
+#define SPI_MOSI_PIN GP7
+
+#define ENCODER_A_PINS { GP26 }
+#define ENCODER_B_PINS { GP28 }

keyboards/ploopyco/trackball/rev1_007/keyboard.json

@@ -0,0 +1,25 @@
+{
+    "processor": "RP2040",
+    "bootloader": "rp2040",
+    "usb": {
+        "device_version": "1.0.0"
+    },
+    "diode_direction": "COL2ROW",
+    "matrix_pins": {
+        "direct": [
+            ["GP15", "GP21", "GP23", "GP17", "GP19"]
+        ]
+    },
+    "rgblight": {
+        "led_count": 1,
+        "max_brightness": 40,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true
+        }
+    },
+    "ws2812": {
+        "pin": "GP12"
+    }
+}

keyboards/ploopyco/trackball/rev1_007/readme.md

@@ -0,0 +1,3 @@
+See the [main readme](../readme.md) for more details.
+
+This is for the R1.007+ version of the Classic. It's easily distinguishable from the previous versions of the Classic because it has an RP2040 on the board.

keyboards/ploopyco/trackball/rules.mk

@@ -1,6 +0,0 @@
-# Processor frequency
-F_CPU = 8000000
-
-POINTING_DEVICE_DRIVER = pmw3360
-
-DEFAULT_FOLDER = ploopyco/trackball/rev1_005

keyboards/ploopyco/trackball_thumb/config.h

@@ -29,9 +29,6 @@
 // If board has a debug LED, you can enable it by defining this
 // #define DEBUG_LED_PIN F7
 
-/* PMW3360 Settings */
-#define POINTING_DEVICE_CS_PIN B0
-
 #define ENCODER_BUTTON_COL 1
 #define ENCODER_BUTTON_ROW 0
 
@@ -41,6 +38,3 @@
 #define ENCODER_HIGH_THRES_B 90
 /* Custom encoder needs to specify just how many encoders we have */
 #define NUM_ENCODERS 1
-
-#define ENCODER_A_PINS { F4 }
-#define ENCODER_B_PINS { F0 }

keyboards/ploopyco/trackball_thumb/info.json

@@ -1,22 +1,22 @@
 {
-    "keyboard_name": "PloopyCo Thumb Trackball",
+    "keyboard_name": "Thumb Trackball",
+    "manufacturer": "Ploopy",
     "url": "www.ploopy.co",
     "maintainer": "ploopyco",
-    "manufacturer": "Ploopy Corporation",
-    "processor": "atmega32u4",
-    "bootloader": "atmel-dfu",
     "usb": {
         "vid": "0x5043",
         "pid": "0x5C46",
+        "device_version": "0.0.1",
         "max_power": 100
     },
+    "bootmagic": {
+        "matrix": [0, 3]
+    },
     "features": {
         "bootmagic": true,
-        "command": false,
-        "console": false,
         "extrakey": true,
         "mousekey": true,
-        "nkro": true,
+        "nkro": false,
         "pointing_device": true,
         "encoder": true
     },

keyboards/ploopyco/trackball_thumb/post_rules.mk

@@ -0,0 +1 @@
+POINTING_DEVICE_DRIVER = pmw3360

keyboards/ploopyco/trackball_thumb/readme.md

@@ -3,13 +3,13 @@
 It's a DIY, QMK Powered Trackball...for thumb ballers!
 
 * Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
-* Hardware Supported: ATMega32u4 8MHz(3.3v)
+* Hardware Supported: ATMega32u4 8MHz(3.3v), Raspberry RP2040
 * Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco)
 
 Make example for this keyboard (after setting up your build environment):
 
     make ploopyco/trackball_thumb/rev1_001:default:flash
-    
+
 To jump to the bootloader, hold down "Button 4" (button closest to the USB port).
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ploopyco/trackball_thumb/rev1_001/config.h

@@ -22,3 +22,9 @@
 // They are set as output and pulled high, by default
 #define UNUSABLE_PINS \
     { D1, D3, B4, B7, D6, C7, F6, F5, F3, F7 }
+
+/* PMW33XX Settings */
+#define PMW33XX_CS_PIN B0
+
+#define ENCODER_A_PINS { F0 }
+#define ENCODER_B_PINS { F4 }

keyboards/ploopyco/trackball_thumb/rev1_001/keyboard.json

@@ -1,13 +1,14 @@
 {
-    "usb": {
-        "device_version": "1.0.0"
-    },
-    "diode_direction": "COL2ROW",
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "matrix_pins": {
         "direct": [
             ["D5", "B6", "D4", "D2", "E6", "D7"]
         ]
     },
+    "ws2812": {
+        "pin": "B5"
+    },
     "rgblight": {
         "led_count": 3,
         "max_brightness": 40,
@@ -16,8 +17,5 @@
             "rainbow_mood": true,
             "rainbow_swirl": true
         }
-    },
-    "ws2812": {
-        "pin": "B5"
     }
 }

keyboards/ploopyco/trackball_thumb/rev1_001/readme.md

@@ -1,3 +1,3 @@
-This is the R1.001+ version of the Thumb. Future versions may have other features.
+See the [main readme](../readme.md) for more details.
 
-See the [main readme](../readme.md) for more details. 
+This is for the R1.001 version of the Thumb. It's easily distinguishable from the R1.002+ versions of the Thumb because it has an ATmega32u4 on the board.

keyboards/ploopyco/trackball_thumb/rev1_001/rules.mk

@@ -0,0 +1,2 @@
+# Processor frequency
+F_CPU = 8000000

keyboards/ploopyco/trackball_thumb/rev1_002/config.h

@@ -0,0 +1,32 @@
+/* Copyright 2024 Colin Lam (Ploopy Corporation)
+ * Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define UNUSABLE_PINS \
+    { GP1, GP3, GP4, GP6, GP8, GP10, GP11, GP14, GP18, GP20, GP22, GP24, GP25, GP27, GP29 }
+
+/* PMW3360 Settings */
+#define PMW33XX_LIFTOFF_DISTANCE 0x00
+#define PMW33XX_CS_PIN GP5
+#define SPI_SCK_PIN GP2
+#define SPI_MISO_PIN GP0
+#define SPI_MOSI_PIN GP7
+
+#define ENCODER_A_PINS { GP28 }
+#define ENCODER_B_PINS { GP26 }

keyboards/ploopyco/trackball_thumb/rev1_002/keyboard.json

@@ -0,0 +1,25 @@
+{
+    "processor": "RP2040",
+    "bootloader": "rp2040",
+    "usb": {
+        "device_version": "1.0.0"
+    },
+    "diode_direction": "COL2ROW",
+    "matrix_pins": {
+        "direct": [
+            ["GP17", "GP16", "GP15", "GP21", "GP23", "GP19"]
+        ]
+    },
+    "rgblight": {
+        "led_count": 1,
+        "max_brightness": 40,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true
+        }
+    },
+    "ws2812": {
+        "pin": "GP12"
+    }
+}

keyboards/ploopyco/trackball_thumb/rev1_002/readme.md

@@ -0,0 +1,3 @@
+See the [main readme](../readme.md) for more details.
+
+This is for the R1.002+ version of the Thumb. It's easily distinguishable from the previous versions of the Thumb because it has an RP2040 on the board.

keyboards/ploopyco/trackball_thumb/rules.mk

@@ -1,6 +0,0 @@
-# Processor frequency
-F_CPU = 8000000
-
-POINTING_DEVICE_DRIVER = pmw3360
-
-DEFAULT_FOLDER = ploopyco/trackball_thumb/rev1_001