is31fl3731: driver naming cleanups (#21918)

docs/feature_led_matrix.md

@@ -19,9 +19,9 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `LED_DRIVER_ADDR_<N>
 
 | Variable | Description | Default |
 |----------|-------------|---------|
-| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
-| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `LED_DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
+| `IS31FL3731_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `IS31FL3731_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `IS31FL3731_DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
 | `LED_MATRIX_LED_COUNT` | (Required) How many LED lights are present across all drivers | |
 | `LED_DRIVER_ADDR_1` | (Required) Address for the first LED driver | |
 | `LED_DRIVER_ADDR_2` | (Optional) Address for the second LED driver | |
@@ -41,7 +41,7 @@ Here is an example using 2 drivers.
 #define LED_DRIVER_ADDR_1 0b1110100
 #define LED_DRIVER_ADDR_2 0b1110110
 
-#define LED_DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define LED_DRIVER_1_LED_TOTAL 25
 #define LED_DRIVER_2_LED_TOTAL 24
 #define LED_MATRIX_LED_COUNT (LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL)

docs/feature_rgb_matrix.md

@@ -19,10 +19,10 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `DRIVER_ADDR_<N>` de
 
 | Variable | Description | Default |
 |----------|-------------|---------|
-| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
-| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
-| `ISSI_3731_DEGHOST` | (Optional) Set this define to enable de-ghosting by halving Vcc during blanking time | |
-| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `IS31FL3731_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `IS31FL3731_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `IS31FL3731_DEGHOST` | (Optional) Set this define to enable de-ghosting by halving Vcc during blanking time | |
+| `IS31FL3731_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
 | `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
 | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
 | `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
@@ -42,7 +42,7 @@ Here is an example using 2 drivers.
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110110
 
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 25
 #define DRIVER_2_LED_TOTAL 24
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

drivers/led/issi/is31fl3731-simple.c

@@ -18,6 +18,7 @@
  */
 
 #include "is31fl3731-simple.h"
+#include <string.h>
 #include "i2c_master.h"
 #include "wait.h"
 
@@ -28,34 +29,34 @@
 // 0b1110111 AD <-> VCC
 // 0b1110101 AD <-> SCL
 // 0b1110110 AD <-> SDA
-#define ISSI_ADDR_DEFAULT 0x74
+#define IS31FL3731_I2C_ADDRESS_DEFAULT 0x74
 
-#define ISSI_REG_CONFIG 0x00
-#define ISSI_REG_CONFIG_PICTUREMODE 0x00
-#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
-#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
+#define IS31FL3731_REG_CONFIG 0x00
+#define IS31FL3731_REG_CONFIG_PICTUREMODE 0x00
+#define IS31FL3731_REG_CONFIG_AUTOPLAYMODE 0x08
+#define IS31FL3731_REG_CONFIG_AUDIOPLAYMODE 0x18
 
-#define ISSI_CONF_PICTUREMODE 0x00
-#define ISSI_CONF_AUTOFRAMEMODE 0x04
-#define ISSI_CONF_AUDIOMODE 0x08
+#define IS31FL3731_CONF_PICTUREMODE 0x00
+#define IS31FL3731_CONF_AUTOFRAMEMODE 0x04
+#define IS31FL3731_CONF_AUDIOMODE 0x08
 
-#define ISSI_REG_PICTUREFRAME 0x01
+#define IS31FL3731_REG_PICTUREFRAME 0x01
 
 // Not defined in the datasheet -- See AN for IC
-#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
+#define IS31FL3731_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
 
-#define ISSI_REG_SHUTDOWN 0x0A
-#define ISSI_REG_AUDIOSYNC 0x06
+#define IS31FL3731_REG_SHUTDOWN 0x0A
+#define IS31FL3731_REG_AUDIOSYNC 0x06
 
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
+#define IS31FL3731_COMMANDREGISTER 0xFD
+#define IS31FL3731_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
 
-#ifndef ISSI_TIMEOUT
-#    define ISSI_TIMEOUT 100
+#ifndef IS31FL3731_I2C_TIMEOUT
+#    define IS31FL3731_I2C_TIMEOUT 100
 #endif
 
-#ifndef ISSI_PERSISTENCE
-#    define ISSI_PERSISTENCE 0
+#ifndef IS31FL3731_I2C_PERSISTENCE
+#    define IS31FL3731_I2C_PERSISTENCE 0
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -66,20 +67,20 @@ uint8_t g_twi_transfer_buffer[20];
 // We could optimize this and take out the unused registers from these
 // buffers and the transfers in is31fl3731_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
-uint8_t g_pwm_buffer[LED_DRIVER_COUNT][144];
-bool    g_pwm_buffer_update_required[LED_DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[IS31FL3731_DRIVER_COUNT][144];
+bool    g_pwm_buffer_update_required[IS31FL3731_DRIVER_COUNT] = {false};
 
 /* There's probably a better way to init this... */
-#if LED_DRIVER_COUNT == 1
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}};
-#elif LED_DRIVER_COUNT == 2
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}};
-#elif LED_DRIVER_COUNT == 3
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}};
-#elif LED_DRIVER_COUNT == 4
-uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}, {0}};
+#if IS31FL3731_DRIVER_COUNT == 1
+uint8_t g_led_control_registers[IS31FL3731_DRIVER_COUNT][18] = {{0}};
+#elif IS31FL3731_DRIVER_COUNT == 2
+uint8_t g_led_control_registers[IS31FL3731_DRIVER_COUNT][18] = {{0}, {0}};
+#elif IS31FL3731_DRIVER_COUNT == 3
+uint8_t g_led_control_registers[IS31FL3731_DRIVER_COUNT][18] = {{0}, {0}, {0}};
+#elif IS31FL3731_DRIVER_COUNT == 4
+uint8_t g_led_control_registers[IS31FL3731_DRIVER_COUNT][18] = {{0}, {0}, {0}, {0}};
 #endif
-bool g_led_control_registers_update_required[LED_DRIVER_COUNT] = {false};
+bool g_led_control_registers_update_required[IS31FL3731_DRIVER_COUNT] = {false};
 
 // This is the bit pattern in the LED control registers
 // (for matrix A, add one to register for matrix B)
@@ -99,14 +100,14 @@ void is31fl3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-#if ISSI_PERSISTENCE > 0
-    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
+#if IS31FL3731_I2C_PERSISTENCE > 0
+    for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT) == 0) {
             break;
         }
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT);
 #endif
 }
 
@@ -125,12 +126,12 @@ void is31fl3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
         // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
         memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
 
-#if ISSI_PERSISTENCE > 0
-        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3731_I2C_PERSISTENCE > 0
+        for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT) == 0) break;
         }
 #else
-        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT);
 #endif
     }
 }
@@ -142,26 +143,26 @@ void is31fl3731_init(uint8_t addr) {
     // then disable software shutdown.
 
     // select "function register" bank
-    is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+    is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, IS31FL3731_BANK_FUNCTIONREG);
 
     // enable software shutdown
-    is31fl3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
-#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array
-    is31fl3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10);
+    is31fl3731_write_register(addr, IS31FL3731_REG_SHUTDOWN, 0x00);
+#ifdef IS31FL3731_DEGHOST // set to enable de-ghosting of the array
+    is31fl3731_write_register(addr, IS31FL3731_REG_GHOST_IMAGE_PREVENTION, 0x10);
 #endif
 
     // this delay was copied from other drivers, might not be needed
     wait_ms(10);
 
     // picture mode
-    is31fl3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
+    is31fl3731_write_register(addr, IS31FL3731_REG_CONFIG, IS31FL3731_REG_CONFIG_PICTUREMODE);
     // display frame 0
-    is31fl3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
+    is31fl3731_write_register(addr, IS31FL3731_REG_PICTUREFRAME, 0x00);
     // audio sync off
-    is31fl3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
+    is31fl3731_write_register(addr, IS31FL3731_REG_AUDIOSYNC, 0x00);
 
     // select bank 0
-    is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+    is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, 0);
 
     // turn off all LEDs in the LED control register
     for (int i = 0x00; i <= 0x11; i++) {
@@ -179,15 +180,15 @@ void is31fl3731_init(uint8_t addr) {
     }
 
     // select "function register" bank
-    is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+    is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, IS31FL3731_BANK_FUNCTIONREG);
 
     // disable software shutdown
-    is31fl3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
+    is31fl3731_write_register(addr, IS31FL3731_REG_SHUTDOWN, 0x01);
 
     // select bank 0 and leave it selected.
     // most usage after initialization is just writing PWM buffers in bank 0
     // as there's not much point in double-buffering
-    is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+    is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, 0);
 }
 
 void is31fl3731_set_value(int index, uint8_t value) {

drivers/led/issi/is31fl3731-simple.h

@@ -20,9 +20,23 @@
 
 #include <stdint.h>
 #include <stdbool.h>
-#include <string.h>
 #include "progmem.h"
 
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef LED_DRIVER_COUNT
+#    define IS31FL3731_DRIVER_COUNT LED_DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+#    define IS31FL3731_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+#    define IS31FL3731_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_3731_DEGHOST
+#    define IS31FL3731_DEGHOST ISSI_3731_DEGHOST
+#endif
+// ========
+
 typedef struct is31_led {
     uint8_t driver : 2;
     uint8_t v;

drivers/led/issi/is31fl3731.c

@@ -17,6 +17,7 @@
  */
 
 #include "is31fl3731.h"
+#include <string.h>
 #include "i2c_master.h"
 #include "wait.h"
 
@@ -27,34 +28,34 @@
 // 0b1110111 AD <-> VCC
 // 0b1110101 AD <-> SCL
 // 0b1110110 AD <-> SDA
-#define ISSI_ADDR_DEFAULT 0x74
+#define IS31FL3731_I2C_ADDRESS_DEFAULT 0x74
 
-#define ISSI_REG_CONFIG 0x00
-#define ISSI_REG_CONFIG_PICTUREMODE 0x00
-#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
-#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
+#define IS31FL3731_REG_CONFIG 0x00
+#define IS31FL3731_REG_CONFIG_PICTUREMODE 0x00
+#define IS31FL3731_REG_CONFIG_AUTOPLAYMODE 0x08
+#define IS31FL3731_REG_CONFIG_AUDIOPLAYMODE 0x18
 
-#define ISSI_CONF_PICTUREMODE 0x00
-#define ISSI_CONF_AUTOFRAMEMODE 0x04
-#define ISSI_CONF_AUDIOMODE 0x08
+#define IS31FL3731_CONF_PICTUREMODE 0x00
+#define IS31FL3731_CONF_AUTOFRAMEMODE 0x04
+#define IS31FL3731_CONF_AUDIOMODE 0x08
 
-#define ISSI_REG_PICTUREFRAME 0x01
+#define IS31FL3731_REG_PICTUREFRAME 0x01
 
 // Not defined in the datasheet -- See AN for IC
-#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
+#define IS31FL3731_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
 
-#define ISSI_REG_SHUTDOWN 0x0A
-#define ISSI_REG_AUDIOSYNC 0x06
+#define IS31FL3731_REG_SHUTDOWN 0x0A
+#define IS31FL3731_REG_AUDIOSYNC 0x06
 
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
+#define IS31FL3731_COMMANDREGISTER 0xFD
+#define IS31FL3731_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
 
-#ifndef ISSI_TIMEOUT
-#    define ISSI_TIMEOUT 100
+#ifndef IS31FL3731_I2C_TIMEOUT
+#    define IS31FL3731_I2C_TIMEOUT 100
 #endif
 
-#ifndef ISSI_PERSISTENCE
-#    define ISSI_PERSISTENCE 0
+#ifndef IS31FL3731_I2C_PERSISTENCE
+#    define IS31FL3731_I2C_PERSISTENCE 0
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -65,11 +66,11 @@ uint8_t g_twi_transfer_buffer[20];
 // We could optimize this and take out the unused registers from these
 // buffers and the transfers in is31fl3731_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][144];
-bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[IS31FL3731_DRIVER_COUNT][144];
+bool    g_pwm_buffer_update_required[IS31FL3731_DRIVER_COUNT] = {false};
 
-uint8_t g_led_control_registers[DRIVER_COUNT][18]             = {{0}};
-bool    g_led_control_registers_update_required[DRIVER_COUNT] = {false};
+uint8_t g_led_control_registers[IS31FL3731_DRIVER_COUNT][18]             = {{0}};
+bool    g_led_control_registers_update_required[IS31FL3731_DRIVER_COUNT] = {false};
 
 // This is the bit pattern in the LED control registers
 // (for matrix A, add one to register for matrix B)
@@ -89,12 +90,12 @@ void is31fl3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-#if ISSI_PERSISTENCE > 0
-    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3731_I2C_PERSISTENCE > 0
+    for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT);
 #endif
 }
 
@@ -113,12 +114,12 @@ void is31fl3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
         // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
         memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
 
-#if ISSI_PERSISTENCE > 0
-        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3731_I2C_PERSISTENCE > 0
+        for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT) == 0) break;
         }
 #else
-        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT);
 #endif
     }
 }
@@ -130,26 +131,26 @@ void is31fl3731_init(uint8_t addr) {
     // then disable software shutdown.
 
     // select "function register" bank
-    is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+    is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, IS31FL3731_BANK_FUNCTIONREG);
 
     // enable software shutdown
-    is31fl3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
-#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array
-    is31fl3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10);
+    is31fl3731_write_register(addr, IS31FL3731_REG_SHUTDOWN, 0x00);
+#ifdef IS31FL3731_DEGHOST // set to enable de-ghosting of the array
+    is31fl3731_write_register(addr, IS31FL3731_REG_GHOST_IMAGE_PREVENTION, 0x10);
 #endif
 
     // this delay was copied from other drivers, might not be needed
     wait_ms(10);
 
     // picture mode
-    is31fl3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
+    is31fl3731_write_register(addr, IS31FL3731_REG_CONFIG, IS31FL3731_REG_CONFIG_PICTUREMODE);
     // display frame 0
-    is31fl3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
+    is31fl3731_write_register(addr, IS31FL3731_REG_PICTUREFRAME, 0x00);
     // audio sync off
-    is31fl3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
+    is31fl3731_write_register(addr, IS31FL3731_REG_AUDIOSYNC, 0x00);
 
     // select bank 0
-    is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+    is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, 0);
 
     // turn off all LEDs in the LED control register
     for (int i = 0x00; i <= 0x11; i++) {
@@ -167,15 +168,15 @@ void is31fl3731_init(uint8_t addr) {
     }
 
     // select "function register" bank
-    is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+    is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, IS31FL3731_BANK_FUNCTIONREG);
 
     // disable software shutdown
-    is31fl3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
+    is31fl3731_write_register(addr, IS31FL3731_REG_SHUTDOWN, 0x01);
 
     // select bank 0 and leave it selected.
     // most usage after initialization is just writing PWM buffers in bank 0
     // as there's not much point in double-buffering
-    is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+    is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, 0);
 }
 
 void is31fl3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {

drivers/led/issi/is31fl3731.h

@@ -19,9 +19,23 @@
 
 #include <stdint.h>
 #include <stdbool.h>
-#include <string.h>
 #include "progmem.h"
 
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+#    define IS31FL3731_DRIVER_COUNT DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+#    define IS31FL3731_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+#    define IS31FL3731_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_3731_DEGHOST
+#    define IS31FL3731_DEGHOST ISSI_3731_DEGHOST
+#endif
+// ========
+
 typedef struct is31_led {
     uint8_t driver : 2;
     uint8_t r;

keyboards/aeboards/satellite/rev1/config.h

@@ -20,7 +20,7 @@
 #define DRIVER_ADDR_1 0x74
 #define DRIVER_ADDR_2 0x76
 
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 36
 #define DRIVER_2_LED_TOTAL 36
 #define ISSI_DRIVER_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/clueboard/66_hotswap/gen1/config.h

@@ -44,7 +44,7 @@
 #define I2C1_SCL_PIN B8
 #define I2C1_SDA_PIN B9
 
-#define LED_DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define LED_MATRIX_LED_COUNT 71
 
 // LED Matrix Animation modes. Explicitly enabled

keyboards/dp60/config.h

@@ -35,7 +35,7 @@
 //rgb matrix setting
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 36
 #define DRIVER_2_LED_TOTAL 36
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/dztech/dz65rgb/v1/config.h

@@ -72,7 +72,7 @@
 #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b1110100
 #    define DRIVER_ADDR_2 0b1110111
-#    define DRIVER_COUNT 2
+#    define IS31FL3731_DRIVER_COUNT 2
 #    define DRIVER_1_LED_TOTAL 35
 #    define DRIVER_2_LED_TOTAL 33
 #    define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/dztech/dz65rgb/v2/config.h

@@ -72,7 +72,7 @@
 #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b1110100
 #    define DRIVER_ADDR_2 0b1110111
-#    define DRIVER_COUNT 2
+#    define IS31FL3731_DRIVER_COUNT 2
 #    define DRIVER_1_LED_TOTAL 35
 #    define DRIVER_2_LED_TOTAL 33
 #    define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/ergodox_ez/config.h

@@ -93,7 +93,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // RGB backlight
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 24
 #define DRIVER_2_LED_TOTAL 24
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/fallacy/config.h

@@ -19,7 +19,7 @@
  * Using the default defines here, but using a custom implementation
  */
 #define LED_DRIVER_ADDR_1 0b1110100
-#define LED_DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define LED_MATRIX_LED_COUNT 3
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap

keyboards/ferris/0_2/bling/config.h

@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* LED Drivers */
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110101
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 7
 #define DRIVER_2_LED_TOTAL 7
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/geekboards/tester/config.h

@@ -57,7 +57,7 @@
 
 #    define DRIVER_ADDR_1 0b1110100
 #    define DRIVER_ADDR_2 0b1110101
-#    define DRIVER_COUNT 2
+#    define IS31FL3731_DRIVER_COUNT 2
 #    define DRIVER_1_LED_TOTAL 8
 #    define DRIVER_2_LED_TOTAL 0
 #    define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/gizmo_engineering/gk6/config.h

@@ -21,7 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
 
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 32
 #define DRIVER_2_LED_TOTAL 32
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/handwired/orbweaver/config.h

@@ -17,7 +17,7 @@
 
 #pragma once
 
-#define DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define DRIVER_ADDR_1 0b1110100
 #define RGB_MATRIX_LED_COUNT 20
 #define I2C1_CLOCK_SPEED 100000

keyboards/hs60/v1/config.h

@@ -44,7 +44,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110101
 
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 30
 
 #ifdef  HS60_ANSI

keyboards/inett_studio/sqx/hotswap/config.h

@@ -34,7 +34,7 @@
 #define DRIVER_2_LED_TOTAL 31
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 
 #if defined(RGB_MATRIX_ENABLE) && defined(RGBLIGHT_ENABLE)

keyboards/inett_studio/sqx/universal/config.h

@@ -34,7 +34,7 @@
 #define DRIVER_2_LED_TOTAL 36
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 
 #if defined(RGB_MATRIX_ENABLE) && defined(RGBLIGHT_ENABLE)

keyboards/input_club/ergodox_infinity/config.h

@@ -44,7 +44,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* LED matrix driver */
 #define LED_DRIVER_ADDR_1 0x74
-#define LED_DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define LED_MATRIX_LED_COUNT 76
 #define LED_MATRIX_SPLIT { 38, 38 }
 #define LED_DISABLE_WHEN_USB_SUSPENDED

keyboards/input_club/whitefox/config.h

@@ -22,7 +22,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* LED matrix driver */
 #define LED_DRIVER_ADDR_1 0x74
-#define LED_DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define LED_MATRIX_LED_COUNT 71
 #define LED_DISABLE_WHEN_USB_SUSPENDED
 

keyboards/kbdfans/kbd67/mkiirgb/v1/config.h

@@ -57,7 +57,7 @@
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 35
 #define DRIVER_2_LED_TOTAL 32
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/kbdfans/kbd67/mkiirgb/v2/config.h

@@ -57,7 +57,7 @@
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255
 #    define DRIVER_ADDR_1 0b1110100
 #    define DRIVER_ADDR_2 0b1110111
-#    define DRIVER_COUNT 2
+#    define IS31FL3731_DRIVER_COUNT 2
 #    define DRIVER_1_LED_TOTAL 35
 #    define DRIVER_2_LED_TOTAL 32
 #    define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/kbdfans/maja/config.h

@@ -56,7 +56,7 @@
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110110
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 36
 #define DRIVER_2_LED_TOTAL 31
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/latincompass/latin17rgb/config.h

@@ -79,7 +79,7 @@
 #    define DRIVER_ADDR_1 0b1110100
 #    define DRIVER_ADDR_2 0b1110110
 
-#    define DRIVER_COUNT 2
+#    define IS31FL3731_DRIVER_COUNT 2
 #    define DRIVER_1_LED_TOTAL 25
 #    define DRIVER_2_LED_TOTAL 24
 #    define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/latincompass/latin6rgb/config.h

@@ -79,7 +79,7 @@
 // 0b1110110 AD <-> SDA
 #define DRIVER_ADDR_1 0b1110100
 
-#define DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 6
 #endif
 

keyboards/matrix/m20add/config.h

@@ -79,5 +79,5 @@
 #define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
 
 #define DRIVER_ADDR_1 0b1110100
-#define DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 20

keyboards/matrix/noah/config.h

@@ -21,7 +21,7 @@
 // rgb matrix setting
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110110
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 36
 #define DRIVER_2_LED_TOTAL 36
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/mechlovin/adelais/rgb_led/rev2/config.h

@@ -10,7 +10,7 @@
 // 0b1110110 AD <-> SDA
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110110
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 32
 #define DRIVER_2_LED_TOTAL 36
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/mechlovin/delphine/rgb_led/config.h

@@ -8,7 +8,7 @@
 // 0b1110101 AD <-> SCL
 // 0b1110110 AD <-> SDA
 #define DRIVER_ADDR_1 0b1110110
-#define DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 25
 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)

keyboards/mechlovin/hannah60rgb/rev2/config.h

@@ -9,7 +9,7 @@
 // 0b1110110 AD <-> SDA
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110110
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 44
 #define DRIVER_2_LED_TOTAL 34
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/mechlovin/olly/octagon/config.h

@@ -29,7 +29,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define I2C_DRIVER I2CD2
 #define I2C1_SCL_PIN B10
 #define I2C1_SDA_PIN B11
-#define LED_DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define LED_MATRIX_LED_COUNT 94
 #define LED_MATRIX_KEYPRESSES // reacts to keypresses
 #define LED_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)

keyboards/mechlovin/zed65/mono_led/config.h

@@ -29,7 +29,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define I2C_DRIVER I2CD2
 #define I2C1_SCL_PIN B10
 #define I2C1_SDA_PIN B11
-#define LED_DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define LED_MATRIX_LED_COUNT 70
 #define LED_MATRIX_KEYPRESSES // reacts to keypresses
 #define LED_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)

keyboards/moonlander/config.h

@@ -68,7 +68,7 @@
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
 
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 36
 #define DRIVER_2_LED_TOTAL 36
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/neson_design/700e/config.h

@@ -34,7 +34,7 @@
 #define DRIVER_2_LED_TOTAL 32
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL+DRIVER_2_LED_TOTAL)
 
 #define USB_SUSPEND_WAKEUP_DELAY 1000

keyboards/neson_design/n6/config.h

@@ -34,5 +34,5 @@
 #define DRIVER_2_LED_TOTAL 32
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL+DRIVER_2_LED_TOTAL)

keyboards/opendeck/32/rev1/config.h

@@ -17,7 +17,7 @@
 
 // RGB matrix
 #define DRIVER_ADDR_1 0b1110100
-#define DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT (4 * 8 * 3)
 #define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_SPIRAL

keyboards/planck/light/config.h

@@ -17,7 +17,7 @@
 #define DRIVER_ADDR_1      0b1110100
 #define DRIVER_ADDR_2      0b1110110
 
-#define DRIVER_COUNT       2
+#define IS31FL3731_DRIVER_COUNT       2
 #define DRIVER_1_LED_TOTAL 25
 #define DRIVER_2_LED_TOTAL 24
 #define RGB_MATRIX_LED_COUNT   (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/smallkeyboard/config.h

@@ -75,6 +75,6 @@
 // 0b1110110 AD <-> SDA
 #define DRIVER_ADDR_1 0b1110100
 
-#define DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 6
 #endif

keyboards/spaceholdings/nebula12/config.h

@@ -73,7 +73,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
 #define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
 
-#define DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 16
 
 // These define which keys in the matrix are alphas/mods

keyboards/terrazzo/config.h

@@ -18,7 +18,7 @@
 #ifdef LED_MATRIX_ENABLE
 
 #define LED_DRIVER_ADDR_1 0x74
-#define LED_DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define LED_MATRIX_LED_COUNT 105
 #define LED_MATRIX_ROWS 15
 #define LED_MATRIX_COLS 7

keyboards/tkc/portico/config.h

@@ -41,14 +41,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
 #    define DRIVER_ADDR_1 0x74
 #    define DRIVER_ADDR_2 0x77
-#    define DRIVER_COUNT 2
+#    define IS31FL3731_DRIVER_COUNT 2
 #    define DRIVER_1_LED_TOTAL 36
 #    define DRIVER_2_LED_TOTAL 31
 #    define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 
 #else
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 67
 
 #define RGB_BACKLIGHT_ENABLED 1

keyboards/wilba_tech/rama_works_kara/config.h

@@ -16,7 +16,7 @@
 #pragma once
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap

keyboards/wilba_tech/rama_works_koyu/config.h

@@ -16,7 +16,7 @@
 #pragma once
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap

keyboards/wilba_tech/rama_works_m10_c/config.h

@@ -21,7 +21,7 @@
 #define LOCKING_RESYNC_ENABLE
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 12
 
 // Enable WT RGB backlight

keyboards/wilba_tech/rama_works_m50_a/config.h

@@ -21,7 +21,7 @@
 #define LOCKING_RESYNC_ENABLE
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
 // Enable WT RGB backlight

keyboards/wilba_tech/rama_works_m60_a/config.h

@@ -16,7 +16,7 @@
 #pragma once
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap

keyboards/wilba_tech/rama_works_m65_b/config.h

@@ -21,7 +21,7 @@
 #define LOCKING_RESYNC_ENABLE
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
 // Enable WT RGB backlight

keyboards/wilba_tech/rama_works_m65_bx/config.h

@@ -21,7 +21,7 @@
 #define LOCKING_RESYNC_ENABLE
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
 // Enable WT RGB backlight

keyboards/wilba_tech/rama_works_u80_a/config.h

@@ -38,7 +38,7 @@
 //#define NO_ACTION_ONESHOT
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 3
+#define IS31FL3731_DRIVER_COUNT 3
 #define RGB_MATRIX_LED_COUNT 108
 
 #define RGB_BACKLIGHT_ENABLED 1

keyboards/wilba_tech/wt60_b/config.h

@@ -23,7 +23,7 @@
 
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
 #define RGB_BACKLIGHT_ENABLED 1

keyboards/wilba_tech/wt60_bx/config.h

@@ -23,7 +23,7 @@
 
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
 #define RGB_BACKLIGHT_ENABLED 1

keyboards/wilba_tech/wt60_c/config.h

@@ -23,7 +23,7 @@
 
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
 #define RGB_BACKLIGHT_ENABLED 1

keyboards/wilba_tech/zeal60/config.h

@@ -16,7 +16,7 @@
 #pragma once
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap

keyboards/wilba_tech/zeal65/config.h

@@ -16,7 +16,7 @@
 #pragma once
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap

keyboards/xbows/knight/config.h

@@ -50,7 +50,7 @@
 #    define DRIVER_ADDR_1 0b1110100
 #    define DRIVER_ADDR_2 0b1110110
 #    define DRIVER_ADDR_3 0b1110101
-#    define DRIVER_COUNT 3
+#    define IS31FL3731_DRIVER_COUNT 3
 #    define DRIVER_1_LED_TOTAL 36
 #    define DRIVER_2_LED_TOTAL 35
 #    define DRIVER_3_LED_TOTAL 15

keyboards/xbows/knight_plus/config.h

@@ -50,7 +50,7 @@
 #    define DRIVER_ADDR_1 0b1110100
 #    define DRIVER_ADDR_2 0b1110110
 #    define DRIVER_ADDR_3 0b1110101
-#    define DRIVER_COUNT 3
+#    define IS31FL3731_DRIVER_COUNT 3
 #    define DRIVER_1_LED_TOTAL 36
 #    define DRIVER_2_LED_TOTAL 35
 #    define DRIVER_3_LED_TOTAL 15

keyboards/xbows/nature/config.h

@@ -52,7 +52,7 @@
 #    define DRIVER_ADDR_1 0b1110100
 #    define DRIVER_ADDR_2 0b1110110
 #    define DRIVER_ADDR_3 0b1110101
-#    define DRIVER_COUNT 3
+#    define IS31FL3731_DRIVER_COUNT 3
 #    define DRIVER_1_LED_TOTAL 36
 #    define DRIVER_2_LED_TOTAL 36
 #    define DRIVER_3_LED_TOTAL 15

keyboards/xbows/numpad/config.h

@@ -48,6 +48,6 @@
 #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH       // Hue & value pulse away from multiple key hits then fades value out
 
 #    define DRIVER_ADDR_1 0b1110111
-#    define DRIVER_COUNT 1
+#    define IS31FL3731_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 22
 #endif

keyboards/xbows/ranger/config.h

@@ -49,7 +49,7 @@
 #    define DRIVER_ADDR_1 0b1110100
 #    define DRIVER_ADDR_2 0b1110101
 #    define DRIVER_ADDR_3 0b1110110
-#    define DRIVER_COUNT 3
+#    define IS31FL3731_DRIVER_COUNT 3
 #    define DRIVER_1_LED_TOTAL 36
 #    define DRIVER_2_LED_TOTAL 36
 #    define DRIVER_3_LED_TOTAL 15

keyboards/xbows/woody/config.h

@@ -58,7 +58,7 @@
 
 #    define DRIVER_ADDR_1 0b1110100
 #    define DRIVER_ADDR_2 0b1110110
-#    define DRIVER_COUNT 2
+#    define IS31FL3731_DRIVER_COUNT 2
 #    define DRIVER_1_LED_TOTAL 35
 #    define DRIVER_2_LED_TOTAL 32
 #    define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/xelus/dawn60/rev1/config.h

@@ -16,7 +16,7 @@
 #pragma once
 
 // IS31FL3731 driver
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 64
 
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap

keyboards/xelus/dawn60/rev1_qmk/config.h

@@ -27,7 +27,7 @@
 #define DRIVER_ADDR_1 0x74
 #define DRIVER_ADDR_2 0x76
 
-#define DRIVER_COUNT 2
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 32
 #define DRIVER_2_LED_TOTAL 32
 #define ISSI_DRIVER_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)