Move backlight config to data driven, part 1 (#19887)

keyboards/40percentclub/4pack/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define BACKLIGHT_LED_COUNT 2
-#undef BACKLIGHT_PIN
-#define BACKLIGHT_PINS { F6, F7 }
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/40percentclub/4pack/info.json

@@ -8,6 +8,9 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "pins": ["F6", "F7"]
+    },
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "matrix_pins": {

keyboards/40percentclub/sixpack/config.h

@@ -20,4 +20,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Backlight */
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 6
-#define BACKLIGHT_PINS { F4, F5 } // Top Row, Bottom Row

keyboards/40percentclub/sixpack/info.json

@@ -8,6 +8,9 @@
       "pid": "0x5350",
       "device_version": "10.0.1"
     },
+    "backlight": {
+      "pins": ["F4", "F5"]
+    },
     "indicators": {
       "caps_lock": "B0",
       "num_lock": "D5",

keyboards/4pplet/eagle_viper_rep/rev_a/config.h

@@ -25,7 +25,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PWM_DRIVER    PWMD2
 #define BACKLIGHT_PWM_CHANNEL   4
 #define BACKLIGHT_PAL_MODE      2
-#define BACKLIGHT_ON_STATE      1
 #define BACKLIGHT_LEVELS        10
 #define BACKLIGHT_BREATHING     TRUE
 

keyboards/4pplet/eagle_viper_rep/rev_b/config.h

@@ -27,8 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS        6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD        6
-#define BACKLIGHT_ON_STATE      1
 
 /* Underglow */
 #define RGBLED_NUM 16

keyboards/8pack/config.h

@@ -6,9 +6,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-#define BACKLIGHT_LED_COUNT 8
-#undef BACKLIGHT_PIN
-#define BACKLIGHT_PINS { D1, D0, D4, C6, D7, E6, B4, B5 }
 #define BACKLIGHT_LEVELS 8
 
 // ws2812 options

keyboards/8pack/info.json

@@ -7,6 +7,9 @@
     "vid": "0xFEED",
     "pid": "0x2171"
   },
+  "backlight": {
+    "pins": ["D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"]
+  },
   "processor": "atmega32u4",
   "bootloader": "caterina",
   "matrix_pins": {

keyboards/acheron/athena/alpha/config.h

@@ -32,8 +32,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      2
 #define BACKLIGHT_LEVELS 20
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 5
-#define BACKLIGHT_ON_STATE 0
 
 #define RGB_DI_PIN B15
 #define RGBLED_NUM 34

keyboards/acheron/athena/alpha/info.json

@@ -4,6 +4,10 @@
         "pid": "0x6584",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "on_state": 0,
+        "breathing_period": 5
+    },
     "indicators": {
         "caps_lock": "A10"
     },

keyboards/acheron/athena/beta/config.h

@@ -32,7 +32,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      2
 #define BACKLIGHT_LEVELS 20
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 5
 
 #define RGB_DI_PIN B15
 #define RGBLED_NUM 34

keyboards/acheron/athena/beta/info.json

@@ -4,6 +4,9 @@
         "pid": "0x6585",
         "device_version": "0.0.2"
     },
+    "backlight": {
+        "breathing_period": 5
+    },
     "indicators": {
         "caps_lock": "C8"
     },

keyboards/acheron/austin/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/acheron/elongate/delta/config.h

@@ -30,7 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 20
 #define BACKLIGHT_DEFAULT_LEVEL	10
-#define BREATHING_PERIOD 3
 
 #define RGB_DI_PIN B15
 #define RGBLED_NUM 16

keyboards/acheron/elongate/delta/info.json

@@ -8,6 +8,9 @@
         "pid": "0x454D",
         "device_version": "0.0.2"
     },
+    "backlight": {
+        "breathing_period": 3
+    },
     "processor": "STM32F072",
     "bootloader": "stm32-dfu",
     "layouts": {

keyboards/acheron/shark/beta/config.h

@@ -31,8 +31,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      2
 #define BACKLIGHT_LEVELS 20
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 5
-#define BACKLIGHT_ON_STATE 1
 
 #define RGB_DI_PIN B15
 #define RGBLED_NUM 24

keyboards/acheron/shark/beta/info.json

@@ -4,6 +4,9 @@
         "pid": "0x5369",
         "device_version": "0.0.2"
     },
+    "backlight": {
+        "breathing_period": 5
+    },
     "processor": "STM32F411",
     "bootloader": "stm32-dfu",
     "community_layouts": ["ortho_4x12"],

keyboards/aeboards/ext65/rev2/config.h

@@ -57,6 +57,5 @@
 
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 #define SLEEP_LED_GPT_DRIVER GPTD1

keyboards/amjkeyboard/amj66/config.h

@@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/b_sides/rev41lp/config.h

@@ -24,6 +24,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN B6
-#define BACKLIGHT_ON_STATE 1
 #define BACKLIGHT_LEVELS 7
-#define BACKLIGHT_LIMIT_VAL 150

keyboards/b_sides/rev41lp/info.json

@@ -8,6 +8,9 @@
         "pid": "0x5F10",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "max_brightness": 150
+    },
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layout_aliases": {

keyboards/boston/config.h

@@ -28,7 +28,6 @@
 #define BACKLIGHT_PAL_MODE 1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/bt66tech/bt66tech60/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PWM_CHANNEL 1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/an_c/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/chimera65/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/cloudline/config.h

@@ -13,7 +13,6 @@
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/crin/config.h

@@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/db60/config.h

@@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/devastatingtkl/config.h

@@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/instant60/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/instant65/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/iron165/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/malicious_ergo/config.h

@@ -29,7 +29,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/obliterated75/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/onyx/config.h

@@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/ortho48/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PWM_CHANNEL 1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/ortho60/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PWM_CHANNEL 1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/ortho75/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PWM_CHANNEL 1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 #define ENCODERS_PAD_A { B9 }
 #define ENCODERS_PAD_B { B8 }

keyboards/cannonkeys/practice60/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PWM_CHANNEL 1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/practice65/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PWM_CHANNEL 1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/rekt1800/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/sagittarius/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/satisfaction75/config.h

@@ -35,7 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //LEDS A6, RGB B15
 #define BACKLIGHT_LEVELS 24
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 // I2C config
 #define I2C_DRIVER I2CD1

keyboards/cannonkeys/savage65/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/tmov2/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/tsukuyomi/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/cannonkeys/vicious40/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/checkerboards/nop60/config.h

@@ -30,7 +30,6 @@ Copyright 2021 Nathan Spears
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 // ws2812 options
 #define RGB_DI_PIN D2 // pin the DI on the ws2812 is hooked-up to

keyboards/checkerboards/quark_plus/config.h

@@ -34,7 +34,6 @@
 #define BACKLIGHT_PIN C4
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 // ws2812 options
 #define RGB_DI_PIN C5 // pin the DI on the ws2812 is hooked-up to

keyboards/checkerboards/snop60/config.h

@@ -29,7 +29,6 @@ Copyright 2022 Nathan Spears
 #define BACKLIGHT_PIN           D1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 // ws2812 options
 #define RGB_DI_PIN B1 // pin the DI on the ws2812 is hooked-up to

keyboards/ck60i/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/coarse/cordillera/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/custommk/evo70/config.h

@@ -20,11 +20,8 @@
 #define OLED_UPDATE_INTERVAL 33
 
 #define BACKLIGHT_PIN B5
-#define BACKLIGHT_LIMIT_VAL 255
-#define BACKLIGHT_ON_STATE 0
 #define BACKLIGHT_LEVELS 17
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 #define OLED_DISABLE_TIMEOUT
 

keyboards/custommk/evo70/info.json

@@ -9,6 +9,9 @@
         "pid": "0xFAB5",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "on_state": 0
+    },
     "processor": "atmega32u4",
     "bootloader": "qmk-dfu",
     "diode_direction": "COL2ROW",

keyboards/deng/thirty/config.h

@@ -25,7 +25,6 @@
 #ifdef BACKLIGHT_ENABLE
 #define BACKLIGHT_PIN B11
 #define BACKLIGHT_LEVELS 5
-#define BACKLIGHT_ON_STATE 0
 #endif
 
 /* RGB Matrix */

keyboards/deng/thirty/info.json

@@ -8,6 +8,9 @@
         "pid": "0x7342",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "on_state": 0
+    },
     "processor": "STM32F103",
     "bootloader": "stm32duino",
     "layouts": {

keyboards/duck/orion/v3/config.h

@@ -24,9 +24,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define DIODE_DIRECTION COL2ROW
 
-#undef BACKLIGHT_PIN
-#define BACKLIGHT_PINS { B1, B2, B3, E6 }
-#define BACKLIGHT_LED_COUNT 4
 #define BACKLIGHT_LEVELS 10
 
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/duck/orion/v3/info.json

@@ -8,6 +8,9 @@
         "pid": "0x4F52",
         "device_version": "0.0.2"
     },
+    "backlight": {
+        "pins": ["B1", "B2", "B3", "E6"]
+    },
     "bootmagic": {
         "matrix": [4, 10]
     },

keyboards/ebastler/isometria_75/rev1/config.h

@@ -31,7 +31,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PWM_CHANNEL 2
 #define BACKLIGHT_PAL_MODE 2
 #define BACKLIGHT_LEVELS 5
-#define BACKLIGHT_ON_STATE 1
 #define BACKLIGHT_PWM_OUTPUT_FREQUENCY 1000 // Increases backlight PWM freq if compiled with an unmerged PR. Does no harm without it.
 
 /* Underglow */

keyboards/exclusive/e6v2/le/config.h

@@ -44,7 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef BACKLIGHT_PIN
 #define BACKLIGHT_LEVELS 2
 #define BACKLIGHT_BREAHTING
-#define BREATHING_PERIOD 3
 #endif
 
 #define DIODE_DIRECTION COL2ROW

keyboards/exclusive/e6v2/le/info.json

@@ -8,6 +8,9 @@
         "pid": "0x6060",
         "device_version": "0.0.2"
     },
+    "backlight": {
+        "breathing_period": 3
+    },
     "indicators": {
         "caps_lock": "B7",
         "on_state": 0

keyboards/exclusive/e6v2/oe/config.h

@@ -44,7 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef BACKLIGHT_PIN
 #define BACKLIGHT_LEVELS 5
 #define BACKLIGHT_BREAHTING
-#define BREATHING_PERIOD 3
 #endif
 
 #define DIODE_DIRECTION COL2ROW

keyboards/exclusive/e6v2/oe/info.json

@@ -8,6 +8,9 @@
         "pid": "0x6060",
         "device_version": "0.0.2"
     },
+    "backlight": {
+        "breathing_period": 3
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["60_ansi"],

keyboards/gray_studio/cod67/config.h

@@ -38,7 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  * https://docs.qmk.fm/#/feature_backlight?id=timer-assisted-pwm-implementation
  */
 #define BACKLIGHT_PIN D4
-#define BACKLIGHT_ON_STATE 0
 
 #define RGB_DI_PIN B2
 #ifdef RGB_DI_PIN

keyboards/gray_studio/cod67/info.json

@@ -8,6 +8,9 @@
     "pid": "0x1000",
     "device_version": "0.0.1"
   },
+  "backlight": {
+    "on_state": 0
+  },
   "processor": "atmega32u4",
   "bootloader": "lufa-ms",
   "layouts": {

keyboards/handwired/jot50/config.h

@@ -9,7 +9,6 @@
 #define BACKLIGHT_LEVELS 3
 #define BACKLIGHT_PIN B5
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 5
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW

keyboards/handwired/jot50/info.json

@@ -8,6 +8,9 @@
         "pid": "0x6060",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "breathing_period": 5
+    },
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "community_layouts": ["ortho_5x12"],

keyboards/handwired/lovelive9/config.h

@@ -26,7 +26,6 @@
 #define RGBLIGHT_EFFECT_TWINKLE
 #define BACKLIGHT_LEVELS 5
 #define RGBLIGHT_EFFECT_SNAKE_LENGTH 4
-#define BREATHING_PERIOD 2
 #define RGBLIGHT_LIMIT_VAL 255
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17

keyboards/handwired/lovelive9/info.json

@@ -8,6 +8,9 @@
         "pid": "0x0007",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "breathing_period": 2
+    },
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

keyboards/handwired/oem_iso_fullsize/config.h

@@ -30,15 +30,6 @@
 #define MATRIX_ROW_PINS { C0, B4, F3, F4, F5, F6 }
 #define MATRIX_COL_PINS { C2, C1, E0, D4, D5, A4, A0, B2, B0, E7, E6, D6, B1, B3, D3, D2, B6, F7, F0, F1, F2 }
 
-/*Row 0, resistor R132, Pin A1
-*Row 1, R131, Pin B5
-*Row 2, R130, Pin E4
-*Row 3, R129, Pin A2
-*Row 4, R128, Pin E5
-*Row 5, R127, Pin A7
-#define BACKLIGHT_PINS { B5, E5, E4, A7, A1, A2 }
-#define BACKLIGHT_LEVELS 1*/
-
 #define DIODE_DIRECTION ROW2COL
 
 

keyboards/handwired/pill60/config.h

@@ -23,7 +23,6 @@
 #define BACKLIGHT_PWM_DRIVER    PWMD5
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_LEVELS        5
-#define BREATHING_PERIOD        6
 
 /* Encoder */
 #define ENCODERS_PAD_A \

keyboards/iron180/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 20
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 5
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/iron180/info.json

@@ -8,6 +8,9 @@
         "pid": "0x1180",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "breathing_period": 5
+    },
     "processor": "STM32F072",
     "bootloader": "stm32-dfu",
     "layouts": {

keyboards/jian/nsrev2/config.h

@@ -34,7 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PIN C6
 #define BACKLIGHT_LEVELS 5
 #define BACKLIGHT_BREATHING //not working with splits right now
-#define BREATHING_PERIOD 6
 #endif
 
 /* ws2812 RGB LED */

keyboards/jian/rev1/config.h

@@ -81,7 +81,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef BACKLIGHT_ENABLE
 #define BACKLIGHT_PIN B6
 #define BACKLIGHT_LEVELS 5
-#define BREATHING_PERIOD 6
 #endif
 
 /* ws2812 RGB LED */

keyboards/jian/rev2/config.h

@@ -36,7 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef BACKLIGHT_ENABLE
 #define BACKLIGHT_PIN C6
 #define BACKLIGHT_LEVELS 5
-#define BREATHING_PERIOD 6
 #endif
 
 /* ws2812 RGB LED */

keyboards/kb_elmo/twelvekey/config.h

@@ -28,4 +28,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Backlight */
 #define BACKLIGHT_PIN B1
 #define BACKLIGHT_LEVELS 8
-#define BACKLIGHT_ON_STATE 0

keyboards/kb_elmo/twelvekey/info.json

@@ -8,6 +8,9 @@
         "pid": "0x9879",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "on_state": 0
+    },
     "processor": "atmega328p",
     "bootloader": "usbasploader",
     "layouts": {

keyboards/kbdfans/kbd66/config.h

@@ -37,7 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef BACKLIGHT_PIN
 #define BACKLIGHT_LEVELS 3
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 #endif
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

keyboards/keebsforall/coarse60/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/kprepublic/cospad/config.h

@@ -36,7 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define BACKLIGHT_PIN F7
 #define BACKLIGHT_LEVELS 3
-#define BACKLIGHT_ON_STATE 0
 
 #define RGB_DI_PIN F6
 #ifdef RGB_DI_PIN

keyboards/kprepublic/cospad/info.json

@@ -8,6 +8,9 @@
         "pid": "0xB1E5",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "on_state": 0
+    },
     "indicators": {
         "num_lock": "B2",
         "on_state": 0

keyboards/ktec/staryu/backlight_staryu.h

@@ -18,7 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // Add backwards compatibility for existing keymaps
 static inline void backlight_set_value(uint8_t index, uint8_t level) {
-  static const uint8_t backlight_pins[BACKLIGHT_LED_COUNT] = BACKLIGHT_PINS;
+  static const uint8_t backlight_pins[] = BACKLIGHT_PINS;
   if (level) {
       setPinOutput(backlight_pins[index]);
   } else {

keyboards/ktec/staryu/config.h

@@ -30,8 +30,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLIGHT_LIMIT_VAL 200
 
-
-#undef BACKLIGHT_PIN
-#define BACKLIGHT_PINS { C2, C7, D5, D6, B0 }
-#define BACKLIGHT_LED_COUNT 5
 #define BACKLIGHT_LEVELS 10

keyboards/ktec/staryu/info.json

@@ -8,6 +8,9 @@
         "pid": "0x2328",
         "device_version": "2.0.5"
     },
+    "backlight": {
+        "pins": ["C2", "C7", "D5", "D6", "B0"]
+    },
     "bootmagic": {
         "matrix": [0, 1]
     },

keyboards/linworks/dolice/config.h

@@ -27,4 +27,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Backlight */
 #define BACKLIGHT_PIN B5 // Timer 1 on mega32u4
 #define BACKLIGHT_BREATHING
-#define BACKLIGHT_ON_STATE 1

keyboards/linworks/fave104/config.h

@@ -31,5 +31,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PWM_CHANNEL 2
 #define BACKLIGHT_PAL_MODE 2
 #define BACKLIGHT_LEVELS 5
-#define BACKLIGHT_ON_STATE 1
 #define BACKLIGHT_PWM_OUTPUT_FREQUENCY 1000 // Increases backlight PWM freq if compiled with an unmerged PR. Does no harm without it.

keyboards/linworks/fave87/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Backlight */
 #define BACKLIGHT_PIN B7 // Timer 1 on mega32u4
 #define BACKLIGHT_BREATHING
-#define BACKLIGHT_ON_STATE 1
 
 /* Underglow */
 #define RGB_DI_PIN E2

keyboards/linworks/whale75/config.h

@@ -31,7 +31,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PWM_CHANNEL 3
 #define BACKLIGHT_PAL_MODE 6
 #define BACKLIGHT_LEVELS 5
-#define BACKLIGHT_ON_STATE 1
 #define BACKLIGHT_PWM_OUTPUT_FREQUENCY 1000 // Increases backlight PWM freq if compiled with an unmerged PR. Does no harm without it.
 
 /* Underglow */

keyboards/melgeek/mj6xy/rev3/config.h

@@ -28,8 +28,6 @@
 
 #ifdef  BACKLIGHT_PIN
 #	define BACKLIGHT_LEVELS    10
-#	define BACKLIGHT_ON_STATE  1
-#	define BACKLIGHT_LIMIT_VAL 255
 #endif
 
 #ifdef RGB_DI_PIN

keyboards/mntre/config.h

@@ -22,7 +22,6 @@
 
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_CUSTOM_RESOLUTION 0x400
-#define BACKLIGHT_LIMIT_VAL 84
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/mntre/info.json

@@ -8,6 +8,9 @@
         "pid": "0x1302",
         "device_version": "0.0.2"
     },
+    "backlight": {
+        "max_brightness": 84
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/mokey/ginkgo65hot/config.h

@@ -22,4 +22,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_CAPS_LOCK
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 5

keyboards/mokey/ginkgo65hot/info.json

@@ -8,6 +8,9 @@
         "pid": "0x3366",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "breathing_period": 5
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layout_aliases": {

keyboards/monarch/config.h

@@ -33,7 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE 1
 #define BACKLIGHT_LEVELS 24
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 #define SLEEP_LED_GPT_DRIVER GPTD1
 

keyboards/ncc1701kb/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_LEVELS 3
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
 
 /*Encoders */
 #define ENCODERS_PAD_A { D0 }

keyboards/neito/config.h

@@ -23,8 +23,6 @@
 #define ENCODERS_PAD_B { B0 }
 #define ENCODER_RESOLUTION 4
 
-#define BACKLIGHT_ON_STATE  0
-
 #define BACKLIGHT_PIN B5
 #define BACKLIGHT_LEVELS 5
 

keyboards/neito/info.json

@@ -8,6 +8,9 @@
         "pid": "0xB44C",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "on_state": 0
+    },
     "indicators": {
         "caps_lock": "B6"
     },

keyboards/nopunin10did/jabberwocky/v2/config.h

@@ -21,9 +21,6 @@
 #define MATRIX_ROW_PINS     { B2, B3, B1, D4, B4, D1, E6, B0, F0, F1, F4, F5 }
 #define MATRIX_COL_PINS     { D0, D2, D3, D5, B5, D7, F6, F7, C7, B6 }
 
-/* LED Configuration */
-#define BACKLIGHT_PINS          {D6}
-
 #define BACKLIGHT_LEVELS        6
 
 /* COL2ROW or ROW2COL */

keyboards/nopunin10did/jabberwocky/v2/info.json

@@ -8,6 +8,9 @@
         "pid": "0x4A58",
         "device_version": "0.2.0"
     },
+    "backlight": {
+        "pins": ["D6"]
+    },
     "indicators": {
         "caps_lock": "B7",
         "num_lock": "C6"