LED drivers: change "TWI" to "I2C" (#22617)

drivers/led/issi/is31fl3218-simple.c

@@ -28,8 +28,7 @@
 #    define IS31FL3218_I2C_PERSISTENCE 0
 #endif
 
-// Reusable buffer for transfers
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // IS31FL3218 has 18 PWM outputs and a fixed I2C address, so no chaining.
 uint8_t g_pwm_buffer[IS31FL3218_PWM_REGISTER_COUNT];
@@ -39,27 +38,27 @@ uint8_t g_led_control_registers[IS31FL3218_LED_CONTROL_REGISTER_COUNT] = {0};
 bool    g_led_control_registers_update_required                        = false;
 
 void is31fl3218_write_register(uint8_t reg, uint8_t data) {
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 #if IS31FL3218_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3218_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 2, IS31FL3218_I2C_TIMEOUT) == 0) break;
+        if (i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, i2c_transfer_buffer, 2, IS31FL3218_I2C_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 2, IS31FL3218_I2C_TIMEOUT);
+    i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, i2c_transfer_buffer, 2, IS31FL3218_I2C_TIMEOUT);
 #endif
 }
 
 void is31fl3218_write_pwm_buffer(uint8_t *pwm_buffer) {
-    g_twi_transfer_buffer[0] = IS31FL3218_REG_PWM;
-    memcpy(g_twi_transfer_buffer + 1, pwm_buffer, 18);
+    i2c_transfer_buffer[0] = IS31FL3218_REG_PWM;
+    memcpy(i2c_transfer_buffer + 1, pwm_buffer, 18);
 
 #if IS31FL3218_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3218_I2C_PERSISTENCE; i++) {
-        i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 19, IS31FL3218_I2C_TIMEOUT);
+        i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, i2c_transfer_buffer, 19, IS31FL3218_I2C_TIMEOUT);
     }
 #else
-    i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 19, IS31FL3218_I2C_TIMEOUT);
+    i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, i2c_transfer_buffer, 19, IS31FL3218_I2C_TIMEOUT);
 #endif
 }
 

drivers/led/issi/is31fl3218.c

@@ -28,8 +28,7 @@
 #    define IS31FL3218_I2C_PERSISTENCE 0
 #endif
 
-// Reusable buffer for transfers
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // IS31FL3218 has 18 PWM outputs and a fixed I2C address, so no chaining.
 uint8_t g_pwm_buffer[IS31FL3218_PWM_REGISTER_COUNT];
@@ -39,27 +38,27 @@ uint8_t g_led_control_registers[IS31FL3218_LED_CONTROL_REGISTER_COUNT] = {0};
 bool    g_led_control_registers_update_required                        = false;
 
 void is31fl3218_write_register(uint8_t reg, uint8_t data) {
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 #if IS31FL3218_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3218_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 2, IS31FL3218_I2C_TIMEOUT) == 0) break;
+        if (i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, i2c_transfer_buffer, 2, IS31FL3218_I2C_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 2, IS31FL3218_I2C_TIMEOUT);
+    i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, i2c_transfer_buffer, 2, IS31FL3218_I2C_TIMEOUT);
 #endif
 }
 
 void is31fl3218_write_pwm_buffer(uint8_t *pwm_buffer) {
-    g_twi_transfer_buffer[0] = IS31FL3218_REG_PWM;
-    memcpy(g_twi_transfer_buffer + 1, pwm_buffer, 18);
+    i2c_transfer_buffer[0] = IS31FL3218_REG_PWM;
+    memcpy(i2c_transfer_buffer + 1, pwm_buffer, 18);
 
 #if IS31FL3218_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3218_I2C_PERSISTENCE; i++) {
-        i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 19, IS31FL3218_I2C_TIMEOUT);
+        i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, i2c_transfer_buffer, 19, IS31FL3218_I2C_TIMEOUT);
     }
 #else
-    i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, g_twi_transfer_buffer, 19, IS31FL3218_I2C_TIMEOUT);
+    i2c_transmit(IS31FL3218_I2C_ADDRESS << 1, i2c_transfer_buffer, 19, IS31FL3218_I2C_TIMEOUT);
 #endif
 }
 

drivers/led/issi/is31fl3731-simple.c

@@ -33,8 +33,7 @@
 #    define IS31FL3731_I2C_PERSISTENCE 0
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
 // Storing them like this is optimal for I2C transfers to the registers.
@@ -48,17 +47,17 @@ uint8_t g_led_control_registers[IS31FL3731_DRIVER_COUNT][IS31FL3731_LED_CONTROL_
 bool    g_led_control_registers_update_required[IS31FL3731_DRIVER_COUNT]                        = {false};
 
 void is31fl3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if IS31FL3731_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT) == 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT) == 0) {
             break;
         }
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT);
+    i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT);
 #endif
 }
 
@@ -70,23 +69,23 @@ void is31fl3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes page 0 is already selected
 
     // transmit PWM registers in 9 transfers of 16 bytes
-    // g_twi_transfer_buffer[] is 20 bytes
+    // i2c_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
     for (int i = 0; i < IS31FL3731_PWM_REGISTER_COUNT; i += 16) {
         // set the first register, e.g. 0x24, 0x34, 0x44, etc.
-        g_twi_transfer_buffer[0] = 0x24 + i;
+        i2c_transfer_buffer[0] = 0x24 + i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
-        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
+        memcpy(i2c_transfer_buffer + 1, pwm_buffer + i, 16);
 
 #if IS31FL3731_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT) == 0) break;
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT) == 0) break;
         }
 #else
-        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT);
+        i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT);
 #endif
     }
 }

drivers/led/issi/is31fl3731.c

@@ -32,8 +32,7 @@
 #    define IS31FL3731_I2C_PERSISTENCE 0
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
 // Storing them like this is optimal for I2C transfers to the registers.
@@ -47,15 +46,15 @@ uint8_t g_led_control_registers[IS31FL3731_DRIVER_COUNT][IS31FL3731_LED_CONTROL_
 bool    g_led_control_registers_update_required[IS31FL3731_DRIVER_COUNT]                        = {false};
 
 void is31fl3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if IS31FL3731_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT) == 0) break;
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT);
+    i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3731_I2C_TIMEOUT);
 #endif
 }
 
@@ -67,23 +66,23 @@ void is31fl3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes page 0 is already selected
 
     // transmit PWM registers in 9 transfers of 16 bytes
-    // g_twi_transfer_buffer[] is 20 bytes
+    // i2c_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
     for (int i = 0; i < IS31FL3731_PWM_REGISTER_COUNT; i += 16) {
         // set the first register, e.g. 0x24, 0x34, 0x44, etc.
-        g_twi_transfer_buffer[0] = 0x24 + i;
+        i2c_transfer_buffer[0] = 0x24 + i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
-        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
+        memcpy(i2c_transfer_buffer + 1, pwm_buffer + i, 16);
 
 #if IS31FL3731_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < IS31FL3731_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT) == 0) break;
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT) == 0) break;
         }
 #else
-        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT);
+        i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3731_I2C_TIMEOUT);
 #endif
     }
 }

drivers/led/issi/is31fl3733-simple.c

@@ -63,8 +63,7 @@
 #    define IS31FL3733_SYNC_4 IS31FL3733_SYNC_NONE
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // These buffers match the IS31FL3733 PWM registers.
 // The control buffers match the page 0 LED On/Off registers.
@@ -80,17 +79,17 @@ bool    g_led_control_registers_update_required[IS31FL3733_DRIVER_COUNT]
 
 bool is31fl3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     // If the transaction fails function returns false.
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if IS31FL3733_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
             return false;
         }
     }
 #else
-    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
+    if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
         return false;
     }
 #endif
@@ -106,24 +105,24 @@ bool is31fl3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // Assumes page 1 is already selected.
     // If any of the transactions fails function returns false.
     // Transmit PWM registers in 12 transfers of 16 bytes.
-    // g_twi_transfer_buffer[] is 20 bytes
+    // i2c_transfer_buffer[] is 20 bytes
 
     // Iterate over the pwm_buffer contents at 16 byte intervals.
     for (int i = 0; i < IS31FL3733_PWM_REGISTER_COUNT; i += 16) {
-        g_twi_transfer_buffer[0] = i;
+        i2c_transfer_buffer[0] = i;
         // Copy the data from i to i+15.
         // Device will auto-increment register for data after the first byte
         // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
-        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
+        memcpy(i2c_transfer_buffer + 1, pwm_buffer + i, 16);
 
 #if IS31FL3733_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
                 return false;
             }
         }
 #else
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
             return false;
         }
 #endif

drivers/led/issi/is31fl3733.c

@@ -62,8 +62,7 @@
 #    define IS31FL3733_SYNC_4 IS31FL3733_SYNC_NONE
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // These buffers match the IS31FL3733 PWM registers.
 // The control buffers match the page 0 LED On/Off registers.
@@ -79,17 +78,17 @@ bool    g_led_control_registers_update_required[IS31FL3733_DRIVER_COUNT]
 
 bool is31fl3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     // If the transaction fails function returns false.
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if IS31FL3733_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
             return false;
         }
     }
 #else
-    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
+    if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
         return false;
     }
 #endif
@@ -105,24 +104,24 @@ bool is31fl3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // Assumes page 1 is already selected.
     // If any of the transactions fails function returns false.
     // Transmit PWM registers in 12 transfers of 16 bytes.
-    // g_twi_transfer_buffer[] is 20 bytes
+    // i2c_transfer_buffer[] is 20 bytes
 
     // Iterate over the pwm_buffer contents at 16 byte intervals.
     for (int i = 0; i < IS31FL3733_PWM_REGISTER_COUNT; i += 16) {
-        g_twi_transfer_buffer[0] = i;
+        i2c_transfer_buffer[0] = i;
         // Copy the data from i to i+15.
         // Device will auto-increment register for data after the first byte
         // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
-        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
+        memcpy(i2c_transfer_buffer + 1, pwm_buffer + i, 16);
 
 #if IS31FL3733_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
                 return false;
             }
         }
 #else
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
             return false;
         }
 #endif

drivers/led/issi/is31fl3736-simple.c

@@ -47,8 +47,7 @@
 #    define IS31FL3736_GLOBAL_CURRENT 0xFF
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // These buffers match the IS31FL3736 PWM registers.
 // The control buffers match the page 0 LED On/Off registers.
@@ -63,15 +62,15 @@ uint8_t g_led_control_registers[IS31FL3736_DRIVER_COUNT][IS31FL3736_LED_CONTROL_
 bool    g_led_control_registers_update_required[IS31FL3736_DRIVER_COUNT]                        = {false};
 
 void is31fl3736_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if IS31FL3736_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3736_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT) == 0) break;
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT);
+    i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT);
 #endif
 }
 
@@ -84,22 +83,22 @@ void is31fl3736_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes page 1 is already selected
 
     // transmit PWM registers in 12 transfers of 16 bytes
-    // g_twi_transfer_buffer[] is 20 bytes
+    // i2c_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
     for (int i = 0; i < IS31FL3736_PWM_REGISTER_COUNT; i += 16) {
-        g_twi_transfer_buffer[0] = i;
+        i2c_transfer_buffer[0] = i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
-        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
+        memcpy(i2c_transfer_buffer + 1, pwm_buffer + i, 16);
 
 #if IS31FL3736_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < IS31FL3736_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT) == 0) break;
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT) == 0) break;
         }
 #else
-        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT);
+        i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT);
 #endif
     }
 }

drivers/led/issi/is31fl3736.c

@@ -47,8 +47,7 @@
 #    define IS31FL3736_GLOBAL_CURRENT 0xFF
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // These buffers match the IS31FL3736 PWM registers.
 // The control buffers match the page 0 LED On/Off registers.
@@ -63,15 +62,15 @@ uint8_t g_led_control_registers[IS31FL3736_DRIVER_COUNT][IS31FL3736_LED_CONTROL_
 bool    g_led_control_registers_update_required[IS31FL3736_DRIVER_COUNT]                        = {false};
 
 void is31fl3736_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if IS31FL3736_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3736_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT) == 0) break;
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT);
+    i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3736_I2C_TIMEOUT);
 #endif
 }
 
@@ -84,22 +83,22 @@ void is31fl3736_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes page 1 is already selected
 
     // transmit PWM registers in 12 transfers of 16 bytes
-    // g_twi_transfer_buffer[] is 20 bytes
+    // i2c_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
     for (int i = 0; i < IS31FL3736_PWM_REGISTER_COUNT; i += 16) {
-        g_twi_transfer_buffer[0] = i;
+        i2c_transfer_buffer[0] = i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
-        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
+        memcpy(i2c_transfer_buffer + 1, pwm_buffer + i, 16);
 
 #if IS31FL3736_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < IS31FL3736_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT) == 0) break;
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT) == 0) break;
         }
 #else
-        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT);
+        i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3736_I2C_TIMEOUT);
 #endif
     }
 }

drivers/led/issi/is31fl3737-simple.c

@@ -49,8 +49,7 @@
 #    define IS31FL3737_GLOBAL_CURRENT 0xFF
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // These buffers match the IS31FL3737 PWM registers.
 // The control buffers match the page 0 LED On/Off registers.
@@ -66,15 +65,15 @@ uint8_t g_led_control_registers[IS31FL3737_DRIVER_COUNT][IS31FL3737_LED_CONTROL_
 bool    g_led_control_registers_update_required[IS31FL3737_DRIVER_COUNT]                        = {false};
 
 void is31fl3737_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if IS31FL3737_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3737_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3737_I2C_TIMEOUT) == 0) break;
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3737_I2C_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3737_I2C_TIMEOUT);
+    i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3737_I2C_TIMEOUT);
 #endif
 }
 
@@ -87,22 +86,22 @@ void is31fl3737_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes page 1 is already selected
 
     // transmit PWM registers in 12 transfers of 16 bytes
-    // g_twi_transfer_buffer[] is 20 bytes
+    // i2c_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
     for (int i = 0; i < IS31FL3737_PWM_REGISTER_COUNT; i += 16) {
-        g_twi_transfer_buffer[0] = i;
+        i2c_transfer_buffer[0] = i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
-        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
+        memcpy(i2c_transfer_buffer + 1, pwm_buffer + i, 16);
 
 #if IS31FL3737_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < IS31FL3737_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3737_I2C_TIMEOUT) == 0) break;
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3737_I2C_TIMEOUT) == 0) break;
         }
 #else
-        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3737_I2C_TIMEOUT);
+        i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3737_I2C_TIMEOUT);
 #endif
     }
 }

drivers/led/issi/is31fl3737.c

@@ -49,8 +49,7 @@
 #    define IS31FL3737_GLOBAL_CURRENT 0xFF
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // These buffers match the IS31FL3737 PWM registers.
 // The control buffers match the page 0 LED On/Off registers.
@@ -66,15 +65,15 @@ uint8_t g_led_control_registers[IS31FL3737_DRIVER_COUNT][IS31FL3737_LED_CONTROL_
 bool    g_led_control_registers_update_required[IS31FL3737_DRIVER_COUNT]                        = {false};
 
 void is31fl3737_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if IS31FL3737_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3737_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3737_I2C_TIMEOUT) == 0) break;
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3737_I2C_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3737_I2C_TIMEOUT);
+    i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3737_I2C_TIMEOUT);
 #endif
 }
 
@@ -87,22 +86,22 @@ void is31fl3737_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes page 1 is already selected
 
     // transmit PWM registers in 12 transfers of 16 bytes
-    // g_twi_transfer_buffer[] is 20 bytes
+    // i2c_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
     for (int i = 0; i < IS31FL3737_PWM_REGISTER_COUNT; i += 16) {
-        g_twi_transfer_buffer[0] = i;
+        i2c_transfer_buffer[0] = i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
-        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
+        memcpy(i2c_transfer_buffer + 1, pwm_buffer + i, 16);
 
 #if IS31FL3737_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < IS31FL3737_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3737_I2C_TIMEOUT) == 0) break;
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3737_I2C_TIMEOUT) == 0) break;
         }
 #else
-        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3737_I2C_TIMEOUT);
+        i2c_transmit(addr << 1, i2c_transfer_buffer, 17, IS31FL3737_I2C_TIMEOUT);
 #endif
     }
 }

drivers/led/issi/is31fl3741-simple.c

@@ -52,8 +52,7 @@
 #    define IS31FL3741_GLOBAL_CURRENT 0xFF
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20] = {0xFF};
+uint8_t i2c_transfer_buffer[20] = {0xFF};
 
 // These buffers match the IS31FL3741 and IS31FL3741A PWM registers.
 // The scaling buffers match the page 2 and 3 LED On/Off registers.
@@ -68,15 +67,15 @@ bool    g_scaling_registers_update_required[IS31FL3741_DRIVER_COUNT] = {false};
 uint8_t g_scaling_registers[IS31FL3741_DRIVER_COUNT][IS31FL3741_PWM_REGISTER_COUNT];
 
 void is31fl3741_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if IS31FL3741_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT) == 0) break;
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT);
+    i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT);
 #endif
 }
 
@@ -93,34 +92,34 @@ bool is31fl3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
             is31fl3741_select_page(addr, IS31FL3741_COMMAND_PWM_1);
         }
 
-        g_twi_transfer_buffer[0] = i % 180;
-        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 18);
+        i2c_transfer_buffer[0] = i % 180;
+        memcpy(i2c_transfer_buffer + 1, pwm_buffer + i, 18);
 
 #if IS31FL3741_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
                 return false;
             }
         }
 #else
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
             return false;
         }
 #endif
     }
 
     // transfer the left cause the total number is 351
-    g_twi_transfer_buffer[0] = 162;
-    memcpy(g_twi_transfer_buffer + 1, pwm_buffer + 342, 9);
+    i2c_transfer_buffer[0] = 162;
+    memcpy(i2c_transfer_buffer + 1, pwm_buffer + 342, 9);
 
 #if IS31FL3741_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
             return false;
         }
     }
 #else
-    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
+    if (i2c_transmit(addr << 1, i2c_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
         return false;
     }
 #endif

drivers/led/issi/is31fl3741.c

@@ -52,8 +52,7 @@
 #    define IS31FL3741_GLOBAL_CURRENT 0xFF
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20] = {0xFF};
+uint8_t i2c_transfer_buffer[20] = {0xFF};
 
 // These buffers match the IS31FL3741 and IS31FL3741A PWM registers.
 // The scaling buffers match the page 2 and 3 LED On/Off registers.
@@ -68,15 +67,15 @@ bool    g_scaling_registers_update_required[IS31FL3741_DRIVER_COUNT] = {false};
 uint8_t g_scaling_registers[IS31FL3741_DRIVER_COUNT][IS31FL3741_PWM_REGISTER_COUNT];
 
 void is31fl3741_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if IS31FL3741_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT) == 0) break;
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT);
+    i2c_transmit(addr << 1, i2c_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT);
 #endif
 }
 
@@ -93,34 +92,34 @@ bool is31fl3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
             is31fl3741_select_page(addr, IS31FL3741_COMMAND_PWM_1);
         }
 
-        g_twi_transfer_buffer[0] = i % 180;
-        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 18);
+        i2c_transfer_buffer[0] = i % 180;
+        memcpy(i2c_transfer_buffer + 1, pwm_buffer + i, 18);
 
 #if IS31FL3741_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
                 return false;
             }
         }
 #else
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
             return false;
         }
 #endif
     }
 
     // transfer the left cause the total number is 351
-    g_twi_transfer_buffer[0] = 162;
-    memcpy(g_twi_transfer_buffer + 1, pwm_buffer + 342, 9);
+    i2c_transfer_buffer[0] = 162;
+    memcpy(i2c_transfer_buffer + 1, pwm_buffer + 342, 9);
 
 #if IS31FL3741_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
             return false;
         }
     }
 #else
-    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
+    if (i2c_transmit(addr << 1, i2c_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
         return false;
     }
 #endif

drivers/led/issi/is31flcommon.c

@@ -31,8 +31,7 @@
 #    define ISSI_PERSISTENCE 0
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // These buffers match the PWM & scaling registers.
 // Storing them like this is optimal for I2C transfers to the registers.
@@ -45,15 +44,15 @@ bool    g_scaling_buffer_update_required[DRIVER_COUNT] = {false};
 // For writing of single register entry
 void IS31FL_write_single_register(uint8_t addr, uint8_t reg, uint8_t data) {
     // Set register address and register data ready to write
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if ISSI_PERSISTENCE > 0
     for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+    i2c_transmit(addr << 1, i2c_transfer_buffer, 2, ISSI_TIMEOUT);
 #endif
 }
 
@@ -64,18 +63,18 @@ bool IS31FL_write_multi_registers(uint8_t addr, uint8_t *source_buffer, uint8_t
     // Split the buffer into chunks to transfer
     for (int i = 0; i < buffer_size; i += transfer_size) {
         // Set the first entry of transfer buffer to the first register we want to write
-        g_twi_transfer_buffer[0] = i + start_reg_addr;
+        i2c_transfer_buffer[0] = i + start_reg_addr;
         // Copy the section of our source buffer into the transfer buffer after first register address
-        memcpy(g_twi_transfer_buffer + 1, source_buffer + i, transfer_size);
+        memcpy(i2c_transfer_buffer + 1, source_buffer + i, transfer_size);
 
 #if ISSI_PERSISTENCE > 0
         for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, transfer_size + 1, ISSI_TIMEOUT) != 0) {
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, transfer_size + 1, ISSI_TIMEOUT) != 0) {
                 return false;
             }
         }
 #else
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, transfer_size + 1, ISSI_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, transfer_size + 1, ISSI_TIMEOUT) != 0) {
             return false;
         }
 #endif

drivers/led/snled27351-simple.c

@@ -37,8 +37,7 @@
         { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // These buffers match the SNLED27351 PWM registers.
 // The control buffers match the PG0 LED On/Off registers.
@@ -54,17 +53,17 @@ bool    g_led_control_registers_update_required[SNLED27351_DRIVER_COUNT]
 
 bool snled27351_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     // If the transaction fails function returns false.
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if SNLED27351_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < SNLED27351_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, SNLED27351_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, SNLED27351_I2C_TIMEOUT) != 0) {
             return false;
         }
     }
 #else
-    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, SNLED27351_I2C_TIMEOUT) != 0) {
+    if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, SNLED27351_I2C_TIMEOUT) != 0) {
         return false;
     }
 #endif
@@ -79,26 +78,26 @@ bool snled27351_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // Assumes PG1 is already selected.
     // If any of the transactions fails function returns false.
     // Transmit PWM registers in 12 transfers of 16 bytes.
-    // g_twi_transfer_buffer[] is 20 bytes
+    // i2c_transfer_buffer[] is 20 bytes
 
     // Iterate over the pwm_buffer contents at 16 byte intervals.
     for (int i = 0; i < SNLED27351_PWM_REGISTER_COUNT; i += 16) {
-        g_twi_transfer_buffer[0] = i;
+        i2c_transfer_buffer[0] = i;
         // Copy the data from i to i+15.
         // Device will auto-increment register for data after the first byte
         // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
         for (int j = 0; j < 16; j++) {
-            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+            i2c_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
 #if SNLED27351_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < SNLED27351_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, SNLED27351_I2C_TIMEOUT) != 0) {
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, SNLED27351_I2C_TIMEOUT) != 0) {
                 return false;
             }
         }
 #else
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, SNLED27351_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 17, SNLED27351_I2C_TIMEOUT) != 0) {
             return false;
         }
 #endif

drivers/led/snled27351.c

@@ -37,8 +37,7 @@
         { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[65];
+uint8_t i2c_transfer_buffer[65];
 
 // These buffers match the SNLED27351 PWM registers.
 // The control buffers match the PG0 LED On/Off registers.
@@ -54,17 +53,17 @@ bool    g_led_control_registers_update_required[SNLED27351_DRIVER_COUNT]
 
 bool snled27351_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     // If the transaction fails function returns false.
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if SNLED27351_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < SNLED27351_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, SNLED27351_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, SNLED27351_I2C_TIMEOUT) != 0) {
             return false;
         }
     }
 #else
-    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, SNLED27351_I2C_TIMEOUT) != 0) {
+    if (i2c_transmit(addr << 1, i2c_transfer_buffer, 2, SNLED27351_I2C_TIMEOUT) != 0) {
         return false;
     }
 #endif
@@ -82,22 +81,22 @@ bool snled27351_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
 
     // Iterate over the pwm_buffer contents at 64 byte intervals.
     for (uint8_t i = 0; i < SNLED27351_PWM_REGISTER_COUNT; i += 64) {
-        g_twi_transfer_buffer[0] = i;
+        i2c_transfer_buffer[0] = i;
         // Copy the data from i to i+63.
         // Device will auto-increment register for data after the first byte
         // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
         for (uint8_t j = 0; j < 64; j++) {
-            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+            i2c_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
 #if SNLED27351_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < SNLED27351_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 65, SNLED27351_I2C_TIMEOUT) != 0) {
+            if (i2c_transmit(addr << 1, i2c_transfer_buffer, 65, SNLED27351_I2C_TIMEOUT) != 0) {
                 return false;
             }
         }
 #else
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 65, SNLED27351_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, i2c_transfer_buffer, 65, SNLED27351_I2C_TIMEOUT) != 0) {
             return false;
         }
 #endif

keyboards/input_club/k_type/is31fl3733-dual.c

@@ -60,8 +60,7 @@
 #    define IS31FL3733_SYNC_4 IS31FL3733_SYNC_NONE
 #endif
 
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
+uint8_t i2c_transfer_buffer[20];
 
 // These buffers match the IS31FL3733 PWM registers.
 // The control buffers match the page 0 LED On/Off registers.
@@ -77,17 +76,17 @@ bool    g_led_control_registers_update_required[IS31FL3733_DRIVER_COUNT]
 
 bool is31fl3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data) {
     // If the transaction fails function returns false.
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
+    i2c_transfer_buffer[0] = reg;
+    i2c_transfer_buffer[1] = data;
 
 #if IS31FL3733_I2C_PERSISTENCE > 0
     for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
-        if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(index, addr << 1, i2c_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
             return false;
         }
     }
 #else
-    if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
+    if (i2c_transmit(index, addr << 1, i2c_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
         return false;
     }
 #endif
@@ -103,26 +102,26 @@ bool is31fl3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffe
     // Assumes page 1 is already selected.
     // If any of the transactions fails function returns false.
     // Transmit PWM registers in 12 transfers of 16 bytes.
-    // g_twi_transfer_buffer[] is 20 bytes
+    // i2c_transfer_buffer[] is 20 bytes
 
     // Iterate over the pwm_buffer contents at 16 byte intervals.
     for (int i = 0; i < IS31FL3733_PWM_REGISTER_COUNT; i += 16) {
-        g_twi_transfer_buffer[0] = i;
+        i2c_transfer_buffer[0] = i;
         // Copy the data from i to i+15.
         // Device will auto-increment register for data after the first byte
         // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
         for (int j = 0; j < 16; j++) {
-            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+            i2c_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
 #if IS31FL3733_I2C_PERSISTENCE > 0
         for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
-            if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
+            if (i2c_transmit(index, addr << 1, i2c_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
                 return false;
             }
         }
 #else
-        if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
+        if (i2c_transmit(index, addr << 1, i2c_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
             return false;
         }
 #endif