Move matrix config to info.json, part 7 (#20020)

keyboards/m10a/config.h

@@ -18,14 +18,6 @@
 
 #pragma once
 
-
-/* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { B6, F7, F6, D6 }
-#define MATRIX_COL_PINS { F5, F1, F0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/m10a/info.json

@@ -8,6 +8,11 @@
         "pid": "0x00AA",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "F1", "F0"],
+        "rows": ["B6", "F7", "F6", "D6"]
+    },
+    "diode_direction": "ROW2COL",
     "backlight": {
         "pin": "B7",
         "levels": 6

keyboards/machine_industries/m4_a/config.h

@@ -3,23 +3,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C7, C6 }
-#define MATRIX_COL_PINS { F6, F7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/machine_industries/m4_a/info.json

@@ -8,6 +8,11 @@
         "pid": "0x004A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F6", "F7"],
+        "rows": ["C7", "C6"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/machkeyboards/mach3/config.h

@@ -1,25 +0,0 @@
-/* Copyright 2021 Mach Keyboards
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/* key pins */
-#define MATRIX_ROW_PINS { D1, D0, D4 }
-#define MATRIX_COL_PINS { E6, B4, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW

keyboards/machkeyboards/mach3/info.json

@@ -8,6 +8,11 @@
         "pid": "0x4D33",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["E6", "B4", "B5"],
+        "rows": ["D1", "D0", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B6",
         "levels": 5,

keyboards/macro1/config.h

@@ -16,14 +16,6 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { E6, B7, D0, D1, D2, B3 }
-#define MATRIX_COL_PINS { D3, D4, D6, D7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/macro1/info.json

@@ -8,6 +8,11 @@
       "pid": "0x9999",
       "device_version": "0.0.1"
     },
+    "matrix_pins": {
+      "cols": ["D3", "D4", "D6", "D7"],
+      "rows": ["E6", "B7", "D0", "D1", "D2", "B3"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
       "rotary": [
         {"pin_a": "F0", "pin_b": "F1"}

keyboards/majistic/config.h

@@ -18,15 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5, F4, F5 }  // F4, F5 is dummy
-#define MATRIX_ROW_PINS_RIGHT { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS_RIGHT { B6, B2, B3, B1, F7, F6, F5, F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/majistic/info.json

@@ -8,8 +8,19 @@
     	"pid": "0x6E55",
     	"device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D4", "C6", "D7", "E6", "B4", "B5", "F4", "F5"],
+        "rows": ["F6", "F7", "B1", "B3", "B2"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
-    	"soft_serial_pin": "D2"
+    	"soft_serial_pin": "D2",
+        "matrix_pins": {
+            "right": {
+                "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+                "rows": ["D4", "C6", "D7", "E6", "B4"]
+            }
+        },
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",

keyboards/makrosu/config.h

@@ -16,14 +16,7 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B6 }
-#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5}
-
 #define TAP_CODE_DELAY 10
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/makrosu/info.json

@@ -8,6 +8,11 @@
         "pid": "0x8585",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B2", "B3", "B1", "F7", "F6", "F5"],
+        "rows": ["B6"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "E6", "pin_b": "D1"}

keyboards/malevolti/lyra/rev1/config.h

@@ -15,10 +15,4 @@
   */
 #pragma once
 
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define TAPPING_TERM 100

keyboards/malevolti/lyra/rev1/info.json

@@ -8,6 +8,11 @@
         "pid": "0x4C43",
         "device_version": "30.3.1"
     },
+    "matrix_pins": {
+        "cols": ["B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+        "rows": ["D4", "C6", "D7", "E6", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D2"
     },

keyboards/malevolti/superlyra/rev1/config.h

@@ -15,10 +15,4 @@
   */ 
 #pragma once
 
-// wiring of each half
-#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define TAPPING_TERM 100

keyboards/malevolti/superlyra/rev1/info.json

@@ -8,6 +8,11 @@
         "pid": "0x4C53",
         "device_version": "30.3.1"
     },
+    "matrix_pins": {
+        "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1"],
+        "rows": ["B7", "B3", "B2", "B1", "B0"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

keyboards/manta60/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 ,B4}
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 
 #define RGB_DI_PIN D3

keyboards/manta60/info.json

@@ -8,6 +8,11 @@
         "pid": "0x991D",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"],
+        "rows": ["D4", "C6", "D7", "E6", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D2"
     },

keyboards/manyboard/macro/config.h

@@ -17,13 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3 }
-#define MATRIX_COL_PINS { D4, D5, D6, D7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
 /* RGB Pins */
 #define RGB_DI_PIN B6
 #define RGBLED_NUM 2

keyboards/manyboard/macro/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0015",
         "device_version": "1.0.3"
     },
+    "matrix_pins": {
+        "cols": ["D4", "D5", "D6", "D7"],
+        "rows": ["D0", "D1", "D2", "D3"]
+    },
+    "diode_direction": "ROW2COL",
     "encoder": {
         "rotary": [
             {"pin_a": "C6", "pin_b": "C7"}

keyboards/maple_computing/6ball/config.h

@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/* pin-out */
-#define MATRIX_ROW_PINS { F5 }
-#define MATRIX_COL_PINS { F4, D4, B5, B6, B2, F6 }
-
 /* ws2812 RGB LED */
 #define RGB_DI_PIN F7
 
@@ -37,7 +32,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 6    // Number of LEDs
 
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define TAPPING_TERM 200

keyboards/maple_computing/6ball/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0007",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "D4", "B5", "B6", "B2", "F6"],
+        "rows": ["F5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

keyboards/maple_computing/c39/config.h

@@ -1,41 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-#define MATRIX_ROW_PINS { D1, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D7, E6, C6, D2, D3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/maple_computing/c39/info.json

@@ -8,6 +8,11 @@
         "pid": "0xCA39",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "D7", "E6", "C6", "D2", "D3"],
+        "rows": ["D1", "B4", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

keyboards/maple_computing/christmas_tree/config.h

@@ -17,14 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { D3, F4, D0, F6, F5, D4 }
-#define MATRIX_COL_PINS { D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/maple_computing/christmas_tree/info.json

@@ -7,6 +7,11 @@
     "vid": "0xFEED",
     "pid": "0x3070"
   },
+  "matrix_pins": {
+    "cols": ["D1"],
+    "rows": ["D3", "F4", "D0", "F6", "F5", "D4"]
+  },
+  "diode_direction": "COL2ROW",
   "backlight": {
     "pin": "D2"
   },

keyboards/maple_computing/ivy/rev1/config.h

@@ -1,24 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Let's Macro V2 pin-out */
-#define MATRIX_ROW_PINS { F1, B2, D3 }
-#define MATRIX_COL_PINS { F5, B3, D5 }
-
-#define DIODE_DIRECTION COL2ROW

keyboards/maple_computing/ivy/rev1/info.json

@@ -8,6 +8,11 @@
         "pid": "0x6012",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "B3", "D5"],
+        "rows": ["F1", "B2", "D3"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "D2"
     },

keyboards/maple_computing/jnao/config.h

@@ -17,13 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS { E6, F0, F5, F6, F7 }
-#define MATRIX_COL_PINS { F1, F4, B1, B2, B3, B7, D1, D2, D4, D6, D7, B4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/maple_computing/jnao/info.json

@@ -8,6 +8,11 @@
     "pid": "0x6017",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["F1", "F4", "B1", "B2", "B3", "B7", "D1", "D2", "D4", "D6", "D7", "B4"],
+    "rows": ["E6", "F0", "F5", "F6", "F7"]
+  },
+  "diode_direction": "COL2ROW",
   "backlight": {
     "pin": "D0"
   },

keyboards/maple_computing/launchpad/rev1/config.h

@@ -17,14 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "../config.h"
-
-/* Let's Macro V2 pin-out */
-#define MATRIX_ROW_PINS { C6, B1, B3, D7 }
-#define MATRIX_COL_PINS { D2, F7 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define RGBLED_NUM 10
 #define RGB_DI_PIN F6
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/maple_computing/launchpad/rev1/info.json

@@ -8,6 +8,11 @@
         "pid": "0x6007",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D2", "F7"],
+        "rows": ["C6", "B1", "B3", "D7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

keyboards/maple_computing/lets_split_eh/eh/config.h

@@ -18,13 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/* Let's Split EH? pin-out */
-#define MATRIX_ROW_PINS { B1, B3, D7, B4 }
-#define MATRIX_COL_PINS { F4, F5, C6, B6, B5, D5 }
-
-#define DIODE_DIRECTION COL2ROW
-
 /* ws2812 RGB LED */
 #define RGB_DI_PIN B2
 #define RGBLED_NUM 12    // Number of LEDs (each hand)

keyboards/maple_computing/lets_split_eh/eh/info.json

@@ -8,6 +8,11 @@
         "pid": "0xE401",
         "device_version": "1.0.0"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "C6", "B6", "B5", "D5"],
+        "rows": ["B1", "B3", "D7", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7"
     },

keyboards/maple_computing/minidox/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/maple_computing/minidox/rev1/config.h

@@ -1,24 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { B2, B6, B4, B5 }
-#define MATRIX_COL_PINS { F4, D3, D2, D1, D4 }
-
-//#define EE_HANDS

keyboards/maple_computing/minidox/rev1/info.json

@@ -8,6 +8,11 @@
     "pid": "0x3060",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["F4", "D3", "D2", "D1", "D4"],
+    "rows": ["B2", "B6", "B4", "B5"]
+  },
+  "diode_direction": "COL2ROW",
   "split": {
     "soft_serial_pin": "D0"
   },

keyboards/maple_computing/the_ruler/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { C7 }
-#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, C6}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/maple_computing/the_ruler/info.json

@@ -8,6 +8,11 @@
     "pid": "0x6007",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["D6", "D7", "B4", "B5", "B6", "C6"],
+    "rows": ["C7"]
+  },
+  "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "atmel-dfu",
   "layouts": {

keyboards/marksard/leftover30/config.h

@@ -17,22 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B6, B2, F7, F6, B3, B1, D4, D0 }
-#define MATRIX_COL_PINS { B5, B4, E6, D7, C6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 6

keyboards/marksard/leftover30/info.json

@@ -8,6 +8,11 @@
         "pid": "0xDFA8",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B5", "B4", "E6", "D7", "C6"],
+        "rows": ["B6", "B2", "F7", "F6", "B3", "B1", "D4", "D0"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "F4", "pin_b": "F5"}

keyboards/marksard/rhymestone/rev1/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D3
 
 #ifdef RGBLIGHT_ENABLE

keyboards/marksard/rhymestone/rev1/info.json

@@ -8,6 +8,11 @@
         "pid": "0xDFA1",
         "device_version": "0.2.0"
     },
+    "matrix_pins": {
+        "cols": ["D4", "C6", "D7", "E6", "B4"],
+        "rows": ["F4", "F5", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D2"
     },

keyboards/marksard/treadstone32/lite/config.h

@@ -17,22 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B6, B2, F7, F6, B3, B1, F4, F5 }
-#define MATRIX_COL_PINS { B5, B4, E6, D7, C6 }
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 6

keyboards/marksard/treadstone32/lite/info.json

@@ -3,6 +3,11 @@
     "usb": {
         "device_version": "0.1.5"
     },
+    "matrix_pins": {
+        "cols": ["B5", "B4", "E6", "D7", "C6"],
+        "rows": ["B6", "B2", "F7", "F6", "B3", "B1", "F4", "F5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina"
 }

keyboards/marksard/treadstone32/rev1/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, B2, B4, D7, D6, D4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, C7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 6

keyboards/marksard/treadstone32/rev1/info.json

@@ -3,6 +3,11 @@
     "usb": {
         "device_version": "0.1.0"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "C7"],
+        "rows": ["F1", "F0", "E6", "B2", "B4", "D7", "D6", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu"
 }

keyboards/marksard/treadstone48/rev1/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
   #ifndef RS_EXTRA_LED

keyboards/marksard/treadstone48/rev1/info.json

@@ -8,6 +8,11 @@
     "pid": "0xDFA3",
     "device_version": "0.1.0"
   },
+  "matrix_pins": {
+    "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+    "rows": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"]
+  },
+  "diode_direction": "COL2ROW",
   "split": {
     "soft_serial_pin": "D2"
   },

keyboards/marksard/treadstone48/rev2/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 12

keyboards/marksard/treadstone48/rev2/info.json

@@ -8,6 +8,11 @@
         "pid": "0xDFA3",
         "device_version": "0.2.0"
     },
+    "matrix_pins": {
+        "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+        "rows": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

keyboards/massdrop/alt/config.h

@@ -21,12 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* USB Device descriptor parameter */
 #define SERIAL_NUM          "Unavailable"
 
-#define MATRIX_ROW_PINS { A00, A01, A02, A03, A04 }
-#define MATRIX_COL_PINS { B04, B05, B06, B07, B08, B09, B10, B11, B12, B13, A05, A06, A07, A10, A11 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Temporary solution for matrix delay */
 #define IGNORE_ATOMIC_BLOCK
 

keyboards/massdrop/alt/info.json

@@ -8,6 +8,11 @@
         "pid": "0xEED3",
         "device_version": "1.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B04", "B05", "B06", "B07", "B08", "B09", "B10", "B11", "B12", "B13", "A05", "A06", "A07", "A10", "A11"],
+        "rows": ["A00", "A01", "A02", "A03", "A04"]
+    },
+    "diode_direction": "COL2ROW",
     "community_layouts": ["65_ansi_blocker"],
     "layouts": {
         "LAYOUT_65_ansi_blocker": {

keyboards/massdrop/ctrl/config.h

@@ -21,12 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* USB Device descriptor parameter */
 #define SERIAL_NUM          "Unavailable"
 
-#define MATRIX_ROW_PINS { B04, B05, B06, B07, B08, B09, A10, A11, B10, B11, B12 }
-#define MATRIX_COL_PINS { A00, A01, A02, A03, A04, A05, A06, A07 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Temporary solution for matrix delay */
 #define IGNORE_ATOMIC_BLOCK
 

keyboards/massdrop/ctrl/info.json

@@ -8,6 +8,11 @@
         "pid": "0xEED2",
         "device_version": "1.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A00", "A01", "A02", "A03", "A04", "A05", "A06", "A07"],
+        "rows": ["B04", "B05", "B06", "B07", "B08", "B09", "A10", "A11", "B10", "B11", "B12"]
+    },
+    "diode_direction": "COL2ROW",
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/massdrop/thekey/config.h

@@ -16,15 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- */
-#define MATRIX_ROW_PINS { D4 }
-#define MATRIX_COL_PINS { D2, D1, D0 }
-
-#define DIODE_DIRECTION ROW2COL
-
 #define RGB_DI_PIN B1
 #define RGBLED_NUM 2
 #define RGBLIGHT_HUE_STEP 8

keyboards/massdrop/thekey/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D2", "D1", "D0"],
+        "rows": ["D4"]
+    },
+    "diode_direction": "ROW2COL",
     "backlight": {
         "pin": "B6"
     },

keyboards/massdrop/thekey_v2/config.h

@@ -16,15 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- */
-#define MATRIX_ROW_PINS { D4 }
-#define MATRIX_COL_PINS { D2, D1, D0 }
-
-#define DIODE_DIRECTION ROW2COL
-
 #define RGB_DI_PIN B1
 #define RGBLED_NUM 5
 #define RGBLIGHT_LED_MAP {4, 0, 1, 2, 3}

keyboards/massdrop/thekey_v2/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0000",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["D2", "D1", "D0"],
+        "rows": ["D4"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/masterworks/classy_tkl/rev_a/config.h

@@ -17,25 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
-    { C7, F0, F1, F4, F5, F6 }
-#define MATRIX_COL_PINS \
-    { B4, D7, D6, D4, C6, D5, D3, D2, D1, D0, B7, B3, B2, B1, B0, E6, F7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/masterworks/classy_tkl/rev_a/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B4", "D7", "D6", "D4", "C6", "D5", "D3", "D2", "D1", "D0", "B7", "B3", "B2", "B1", "B0", "E6", "F7"],
+        "rows": ["C7", "F0", "F1", "F4", "F5", "F6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/matchstickworks/southpad/config.h

@@ -1,51 +0,0 @@
-/*
-Copyright 2021 Logan Butler
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B3, B5, B6, B7, C7, C6 }
-#define MATRIX_COL_PINS { B0, B1, B2, B4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/matchstickworks/southpad/info.json

@@ -8,6 +8,11 @@
         "pid": "0x6060",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B0", "B1", "B2", "B4"],
+        "rows": ["B3", "B5", "B6", "B7", "C7", "C6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u2",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/matrix/cain_re/config.h

@@ -19,14 +19,6 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F0, C7, C6, D5, D2, D4, D7, B7, D1 }
-#define MATRIX_COL_PINS { F1, F4, F5, F6, B5, B6, B3, B2, B1, D0, B4, D6}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN E6
 
 #ifdef RGB_DI_PIN

keyboards/matrix/cain_re/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0106",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F1", "F4", "F5", "F6", "B5", "B6", "B3", "B2", "B1", "D0", "B4", "D6"],
+        "rows": ["F0", "C7", "C6", "D5", "D2", "D4", "D7", "B7", "D1"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/matrix/falcon/config.h

@@ -15,12 +15,6 @@
  */
 #pragma once
 
-
-#define MATRIX_ROW_PINS { F1, B7, F7, F5, F4}
-#define MATRIX_COL_PINS { F6, B3, B2, B1, B0, C7, C6, B6, B5, B4, D7, D6, D4}
-
-#define DIODE_DIRECTION ROW2COL
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/matrix/falcon/info.json

@@ -8,6 +8,11 @@
         "pid": "0x474E",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F6", "B3", "B2", "B1", "B0", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F1", "B7", "F7", "F5", "F4"]
+    },
+    "diode_direction": "ROW2COL",
     "indicators": {
         "caps_lock": "E2"
     },

keyboards/matrix/m12og/rev2/config.h

@@ -4,14 +4,6 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { E6, F0, B7, C7, D3, B0, D1 }
-#define MATRIX_COL_PINS { F1, F4, F5, F6, F7, B6, B5, B4, D7, D0, D2, D6, D4, D5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN B3
 
 #ifdef RGB_DI_PIN

keyboards/matrix/m12og/rev2/info.json

@@ -8,6 +8,11 @@
     "pid": "0x8712",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["F1", "F4", "F5", "F6", "F7", "B6", "B5", "B4", "D7", "D0", "D2", "D6", "D4", "D5"],
+    "rows": ["E6", "F0", "B7", "C7", "D3", "B0", "D1"]
+  },
+  "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "atmel-dfu",
   "layouts": {

keyboards/matrix/me/config.h

@@ -15,11 +15,6 @@
  */
 #pragma once
 
-
-#define MATRIX_ROW_PINS {D3, D5, D4, D6, B5, B4}
-#define MATRIX_COL_PINS {B7, B3, B2, B1, B0, F0, F1, F4, F5, F6, F7, C7, C6, B6, D7}
-#define DIODE_DIRECTION COL2ROW
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/matrix/me/info.json

@@ -8,6 +8,11 @@
     "pid": "0x454D",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["B7", "B3", "B2", "B1", "B0", "F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "D7"],
+    "rows": ["D3", "D5", "D4", "D6", "B5", "B4"]
+  },
+  "diode_direction": "COL2ROW",
   "indicators": {
     "caps_lock": "E6",
     "scroll_lock": "D2"

keyboards/matrix/noah/config.h

@@ -11,11 +11,6 @@
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 15
 
-#define MATRIX_ROW_PINS {  B0,  A1, C14, C13,  A0}
-#define MATRIX_COL_PINS { C15, B10,  B7,  B6,  B5,  B4, A15, A10,  A9,  A8, B15, B14, B13, B12,  B2}
-
-#define DIODE_DIRECTION COL2ROW
-
 // i2c setting
 #define I2C1_SCL_PIN B8
 #define I2C1_SDA_PIN B9

keyboards/matthewdias/m3n3van/config.h

@@ -1,42 +0,0 @@
-/*
-Copyright 2021 Matthew Dias <matthewdias@me.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/* m3n3van PCB default pin-out */
-#define MATRIX_ROW_PINS { B5, B6, C6, C7 }
-#define MATRIX_COL_PINS { F4, F5, F6, F1, F7, F0, E6, D3, D0, D1, D2, D4, D6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/matthewdias/m3n3van/info.json

@@ -8,6 +8,11 @@
         "pid": "0x2323",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F1", "F7", "F0", "E6", "D3", "D0", "D1", "D2", "D4", "D6"],
+        "rows": ["B5", "B6", "C6", "C7"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "B4", "pin_b": "D7"}

keyboards/matthewdias/minim/config.h

@@ -1,42 +0,0 @@
-/*
-Copyright 2020 Matthew Dias <matthewdias@me.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/* minim PCB default pin-out */
-#define MATRIX_ROW_PINS { D6, D7, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F1, F7, F0, B0, D1, B1, D2, B2, D3, D5, B3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/matthewdias/minim/info.json

@@ -8,6 +8,11 @@
         "pid": "0xAAAA",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F1", "F7", "F0", "B0", "D1", "B1", "D2", "B2", "D3", "D5", "B3"],
+        "rows": ["D6", "D7", "B4", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/matthewdias/model_v/config.h

@@ -1,42 +0,0 @@
-/*
-Copyright 2021 Matthew Dias <matthewdias@me.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/* model-v PCB default pin-out */
-#define MATRIX_ROW_PINS { D3, D5, D6, D4 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/matthewdias/model_v/info.json

@@ -7,6 +7,11 @@
         "pid": "0x6D76",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7"],
+        "rows": ["D3", "D5", "D6", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/matthewdias/txuu/config.h

@@ -1,42 +0,0 @@
-/*
-Copyright 2021 Matthew Dias <matthewdias@me.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/* m3n3van PCB default pin-out */
-#define MATRIX_ROW_PINS { B1, B0, F7, F4, F1 }
-#define MATRIX_COL_PINS { F0, F5, F6, D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/matthewdias/txuu/info.json

@@ -7,6 +7,11 @@
         "pid": "0x2809",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F5", "F6", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7"],
+        "rows": ["B1", "B0", "F7", "F4", "F1"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layout_aliases": {

keyboards/maxipad/promicro/config.h

@@ -1,33 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
-#define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW

keyboards/maxipad/promicro/info.json

@@ -1,4 +1,9 @@
 {
+    "matrix_pins": {
+        "cols": ["F4", "C6", "D7", "F5", "B4", "B5"],
+        "rows": ["B6", "B2", "B3", "B1", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina"
 }

keyboards/maxipad/teensy2/config.h

@@ -1,33 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 }
-#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW

keyboards/maxipad/teensy2/info.json

@@ -1,4 +1,9 @@
 {
+    "matrix_pins": {
+        "cols": ["F6", "C6", "D7", "F5", "B4", "B5"],
+        "rows": ["B6", "F7", "B2", "B3", "B1"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "halfkay"
 }

keyboards/maxr1998/pulse4k/config.h

@@ -17,14 +17,6 @@
 
 #pragma once
 
-
-/* Matrix pins */
-#define MATRIX_ROW_PINS { B4, E6 }
-#define MATRIX_COL_PINS { B7, B3, F0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Combo setup */
 #define COMBO_COUNT 1
 #define COMBO_TERM 150

keyboards/maxr1998/pulse4k/info.json

@@ -8,6 +8,11 @@
     "pid": "0x6060",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["B7", "B3", "F0"],
+    "rows": ["B4", "E6"]
+  },
+  "diode_direction": "COL2ROW",
   "encoder": {
     "rotary": [
       {"pin_a": "D2", "pin_b": "D3"},

keyboards/mb44/config.h

@@ -1,35 +0,0 @@
-/*
-Copyright 2021 melonbred
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D1, D6, D5, D4 }
-#define MATRIX_COL_PINS { C4, C5, C6, C7, B7, B6, B5, B4, B3, B2, B1, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW

keyboards/mb44/info.json

@@ -8,6 +8,11 @@
         "pid": "0x6D62",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C4", "C5", "C6", "C7", "B7", "B6", "B5", "B4", "B3", "B2", "B1", "B0"],
+        "rows": ["D1", "D6", "D5", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "D3", "pin_b": "D2"}

keyboards/mc_76k/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C7, C6, B6, B0, D1, D0 }
-#define MATRIX_COL_PINS { D5, D3, D4, B1, D6, D7, B4, B5, F7, F6, F5, F4, F1, F0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/mc_76k/info.json

@@ -8,6 +8,11 @@
         "pid": "0x4D43",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D5", "D3", "D4", "B1", "D6", "D7", "B4", "B5", "F7", "F6", "F5", "F4", "F1", "F0"],
+        "rows": ["C7", "C6", "B6", "B0", "D1", "D0"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/mechanickeys/miniashen40/config.h

@@ -1,34 +0,0 @@
-/* Copyright 2021 jfescobar18
-  * 
-  * This program is free software: you can redistribute it and/or modify 
-  * it under the terms of the GNU General Public License as published by 
-  * the Free Software Foundation, either version 2 of the License, or 
-  * (at your option) any later version. 
-  * 
-  * This program is distributed in the hope that it will be useful, 
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
-  * GNU General Public License for more details. 
-  * 
-  * You should have received a copy of the GNU General Public License 
-  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B1, B2, B3, B4 }
-#define MATRIX_COL_PINS { C5, C4, C3, D0, C2, D1, C1, C0, D4, B0, D7, D6, B5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW

keyboards/mechanickeys/miniashen40/info.json

@@ -8,6 +8,11 @@
         "pid": "0x6D6E",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C5", "C4", "C3", "D0", "C2", "D1", "C1", "C0", "D4", "B0", "D7", "D6", "B5"],
+        "rows": ["B1", "B2", "B3", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega328p",
     "bootloader": "usbasploader",
     "layouts": {

keyboards/mechanickeys/undead60m/config.h

@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B7, B5, B4, D7, D6, B3, B2 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* RGB Underglow */
 #define RGB_DI_PIN F7
 #ifdef RGB_DI_PIN

keyboards/mechanickeys/undead60m/info.json

@@ -8,6 +8,11 @@
         "pid": "0x3C4D",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "E6", "C7", "C6", "B6", "D4", "B1", "B0", "B7", "B5", "B4", "D7", "D6", "B3", "B2"],
+        "rows": ["D0", "D1", "D2", "D3", "D5"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "F6", "pin_b": "F5"}

keyboards/mechbrewery/mb65h/config.h

@@ -1,25 +0,0 @@
-/* Copyright 2022 MechBrewery
- * Author: tuananhnguyen204 (https://github.com/AnthonyNguyen168) (tuananhnguyen204@gmail.com)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-#define MATRIX_ROW_PINS { B7, D0, F0, F1, F4 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, D1, D2, D3, D6, D7, B4, B6, C6, C7, F7, F6, F5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW

keyboards/mechbrewery/mb65h/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0002",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B0", "B1", "B2", "B3", "D1", "D2", "D3", "D6", "D7", "B4", "B6", "C6", "C7", "F7", "F6", "F5"],
+        "rows": ["B7", "D0", "F0", "F1", "F4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["65_ansi_blocker"],

keyboards/mechbrewery/mb65s/config.h

@@ -17,13 +17,6 @@
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS { B7, D0, F0, F1, F4 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, D1, D2, D3, D6, D7, B4, B6, C6, C7, F7, F6, F5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/mechbrewery/mb65s/info.json

@@ -8,6 +8,11 @@
         "pid": "0x3635",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B0", "B1", "B2", "B3", "D1", "D2", "D3", "D6", "D7", "B4", "B6", "C6", "C7", "F7", "F6", "F5"],
+        "rows": ["B7", "D0", "F0", "F1", "F4"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "D4",
         "on_state": 0

keyboards/mechkeys/acr60/config.h

@@ -16,14 +16,6 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/mechkeys/acr60/info.json

@@ -8,6 +8,11 @@
         "pid": "0xCA60",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "E6", "C7", "C6", "B7", "D4", "B1", "B0", "B5", "B4", "D7", "D6", "B3", "F4"],
+        "rows": ["D0", "D1", "D2", "D3", "D5"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B6",
         "levels": 5