remove some outdated changes

keyboards/handwired/onekey/keymaps/joystick/halconf.h

@@ -1,524 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#    define HALCONF_H
-
-#    define _CHIBIOS_HAL_CONF_
-#    define _CHIBIOS_HAL_CONF_VER_7_0_
-
-#    include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#    if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#        define HAL_USE_PAL TRUE
-#    endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#    if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#        define HAL_USE_ADC TRUE
-#    endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#    if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#        define HAL_USE_CAN FALSE
-#    endif
-
-/**
- * @brief   Enables the cryptographic subsystem.
- */
-#    if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
-#        define HAL_USE_CRY FALSE
-#    endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#    if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#        define HAL_USE_DAC TRUE
-#    endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#    if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#        define HAL_USE_GPT TRUE
-#    endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#    if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#        define HAL_USE_I2C TRUE
-#    endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#    if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#        define HAL_USE_I2S FALSE
-#    endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#    if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#        define HAL_USE_ICU FALSE
-#    endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#    if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#        define HAL_USE_MAC FALSE
-#    endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#    if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#        define HAL_USE_MMC_SPI FALSE
-#    endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#    if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#        define HAL_USE_PWM TRUE
-#    endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#    if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#        define HAL_USE_RTC FALSE
-#    endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#    if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#        define HAL_USE_SDC FALSE
-#    endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#    if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#        define HAL_USE_SERIAL FALSE
-#    endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#    if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#        define HAL_USE_SERIAL_USB TRUE
-#    endif
-
-/**
- * @brief   Enables the SIO subsystem.
- */
-#    if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
-#        define HAL_USE_SIO FALSE
-#    endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#    if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#        define HAL_USE_SPI FALSE
-#    endif
-
-/**
- * @brief   Enables the TRNG subsystem.
- */
-#    if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
-#        define HAL_USE_TRNG FALSE
-#    endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#    if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#        define HAL_USE_UART FALSE
-#    endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#    if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#        define HAL_USE_USB TRUE
-#    endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#    if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#        define HAL_USE_WDG FALSE
-#    endif
-
-/**
- * @brief   Enables the WSPI subsystem.
- */
-#    if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
-#        define HAL_USE_WSPI FALSE
-#    endif
-
-/*===========================================================================*/
-/* PAL driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
-#        define PAL_USE_CALLBACKS FALSE
-#    endif
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
-#        define PAL_USE_WAIT FALSE
-#    endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#        define ADC_USE_WAIT TRUE
-#    endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#        define ADC_USE_MUTUAL_EXCLUSION TRUE
-#    endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#    if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#        define CAN_USE_SLEEP_MODE TRUE
-#    endif
-
-/**
- * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
- */
-#    if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
-#        define CAN_ENFORCE_USE_CALLBACKS FALSE
-#    endif
-
-/*===========================================================================*/
-/* CRY driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the SW fall-back of the cryptographic driver.
- * @details When enabled, this option, activates a fall-back software
- *          implementation for algorithms not supported by the underlying
- *          hardware.
- * @note    Fall-back implementations may not be present for all algorithms.
- */
-#    if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
-#        define HAL_CRY_USE_FALLBACK FALSE
-#    endif
-
-/**
- * @brief   Makes the driver forcibly use the fall-back implementations.
- */
-#    if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
-#        define HAL_CRY_ENFORCE_FALLBACK FALSE
-#    endif
-
-/*===========================================================================*/
-/* DAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
-#        define DAC_USE_WAIT TRUE
-#    endif
-
-/**
- * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#        define DAC_USE_MUTUAL_EXCLUSION TRUE
-#    endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#    if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#        define I2C_USE_MUTUAL_EXCLUSION TRUE
-#    endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the zero-copy API.
- */
-#    if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#        define MAC_USE_ZERO_COPY FALSE
-#    endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#    if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#        define MAC_USE_EVENTS TRUE
-#    endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#    if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#        define MMC_NICE_WAITING TRUE
-#    endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#    if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#        define SDC_INIT_RETRY 100
-#    endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#    if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#        define SDC_MMC_SUPPORT FALSE
-#    endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#    if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#        define SDC_NICE_WAITING TRUE
-#    endif
-
-/**
- * @brief   OCR initialization constant for V20 cards.
- */
-#    if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
-#        define SDC_INIT_OCR_V20 0x50FF8000U
-#    endif
-
-/**
- * @brief   OCR initialization constant for non-V20 cards.
- */
-#    if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
-#        define SDC_INIT_OCR 0x80100000U
-#    endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#    if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#        define SERIAL_DEFAULT_BITRATE 38400
-#    endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 16 bytes for both the transmission and receive
- *          buffers.
- */
-#    if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#        define SERIAL_BUFFERS_SIZE 16
-#    endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 256 bytes for both the transmission and receive
- *          buffers.
- */
-#    if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#        define SERIAL_USB_BUFFERS_SIZE 1
-#    endif
-
-/**
- * @brief   Serial over USB number of buffers.
- * @note    The default is 2 buffers.
- */
-#    if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#        define SERIAL_USB_BUFFERS_NUMBER 2
-#    endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#        define SPI_USE_WAIT TRUE
-#    endif
-
-/**
- * @brief   Enables circular transfers APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
-#        define SPI_USE_CIRCULAR FALSE
-#    endif
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#        define SPI_USE_MUTUAL_EXCLUSION TRUE
-#    endif
-
-/**
- * @brief   Handling method for SPI CS line.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
-#        define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
-#    endif
-
-/*===========================================================================*/
-/* UART driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#        define UART_USE_WAIT FALSE
-#    endif
-
-/**
- * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#        define UART_USE_MUTUAL_EXCLUSION FALSE
-#    endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#        define USB_USE_WAIT TRUE
-#    endif
-
-/*===========================================================================*/
-/* WSPI driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
-#        define WSPI_USE_WAIT TRUE
-#    endif
-
-/**
- * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#    if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#        define WSPI_USE_MUTUAL_EXCLUSION TRUE
-#    endif
-
-#endif /* HALCONF_H */
-
-/** @} */

keyboards/handwired/onekey/keymaps/joystick/mcuconf.h

@@ -1,273 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F3xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-#define STM32F3xx_MCUCONF
-#define STM32F303_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_HSI_ENABLED TRUE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED TRUE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSE
-#define STM32_PREDIV_VALUE 1
-#define STM32_PLLMUL_VALUE 9
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE1 STM32_PPRE1_DIV2
-#define STM32_PPRE2 STM32_PPRE2_DIV2
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
-#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
-#define STM32_USART1SW STM32_USART1SW_PCLK
-#define STM32_USART2SW STM32_USART2SW_PCLK
-#define STM32_USART3SW STM32_USART3SW_PCLK
-#define STM32_UART4SW STM32_UART4SW_PCLK
-#define STM32_UART5SW STM32_UART5SW_PCLK
-#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
-#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
-#define STM32_TIM1SW STM32_TIM1SW_PCLK2
-#define STM32_TIM8SW STM32_TIM8SW_PCLK2
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-#define STM32_USB_CLOCK_REQUIRED TRUE
-#define STM32_USBPRE STM32_USBPRE_DIV1P5
-
-/*
- * IRQ system settings.
- */
-#define STM32_IRQ_EXTI0_PRIORITY 6
-#define STM32_IRQ_EXTI1_PRIORITY 6
-#define STM32_IRQ_EXTI2_PRIORITY 6
-#define STM32_IRQ_EXTI3_PRIORITY 6
-#define STM32_IRQ_EXTI4_PRIORITY 6
-#define STM32_IRQ_EXTI5_9_PRIORITY 6
-#define STM32_IRQ_EXTI10_15_PRIORITY 6
-#define STM32_IRQ_EXTI16_PRIORITY 6
-#define STM32_IRQ_EXTI17_PRIORITY 15
-#define STM32_IRQ_EXTI18_PRIORITY 6
-#define STM32_IRQ_EXTI19_PRIORITY 15
-#define STM32_IRQ_EXTI20_PRIORITY 15
-#define STM32_IRQ_EXTI21_22_29_PRIORITY 6
-#define STM32_IRQ_EXTI30_32_PRIORITY 6
-#define STM32_IRQ_EXTI33_PRIORITY 6
-#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7
-#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7
-#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
-#define STM32_IRQ_TIM1_CC_PRIORITY 7
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_DUAL_MODE FALSE
-#define STM32_ADC_COMPACT_SAMPLES FALSE
-#define STM32_ADC_USE_ADC1 TRUE
-#define STM32_ADC_USE_ADC2 FALSE
-#define STM32_ADC_USE_ADC3 FALSE
-#define STM32_ADC_USE_ADC4 FALSE
-#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
-#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
-#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_ADC2_DMA_PRIORITY 2
-#define STM32_ADC_ADC3_DMA_PRIORITY 2
-#define STM32_ADC_ADC4_DMA_PRIORITY 2
-#define STM32_ADC_ADC12_IRQ_PRIORITY 5
-#define STM32_ADC_ADC3_IRQ_PRIORITY 5
-#define STM32_ADC_ADC4_IRQ_PRIORITY 5
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
-#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE FALSE
-#define STM32_DAC_USE_DAC1_CH1 TRUE
-#define STM32_DAC_USE_DAC1_CH2 TRUE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM4 FALSE
-#define STM32_GPT_USE_TIM6 TRUE
-#define STM32_GPT_USE_TIM7 TRUE
-#define STM32_GPT_USE_TIM8 TRUE
-#define STM32_GPT_USE_TIM15 FALSE
-#define STM32_GPT_USE_TIM16 FALSE
-#define STM32_GPT_USE_TIM17 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM6_IRQ_PRIORITY 7
-#define STM32_GPT_TIM7_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 TRUE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 10
-#define STM32_I2C_I2C2_IRQ_PRIORITY 10
-#define STM32_I2C_USE_DMA TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY 1
-#define STM32_I2C_I2C2_DMA_PRIORITY 1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_USE_TIM4 FALSE
-#define STM32_ICU_USE_TIM8 FALSE
-#define STM32_ICU_USE_TIM15 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 TRUE
-#define STM32_PWM_USE_TIM4 TRUE
-#define STM32_PWM_USE_TIM8 FALSE
-#define STM32_PWM_USE_TIM15 FALSE
-#define STM32_PWM_USE_TIM16 FALSE
-#define STM32_PWM_USE_TIM17 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
-
-/*
- * RTC driver system settings.
- */
-#define STM32_RTC_PRESA_VALUE 32
-#define STM32_RTC_PRESS_VALUE 1024
-#define STM32_RTC_CR_INIT 0
-#define STM32_RTC_TAMPCR_INIT 0
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_USE_SPI3 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 8
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USE_USART3 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_USART3_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1 TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG FALSE
-
-#endif /* MCUCONF_H */

quantum/process_keycode/process_joystick.c

@@ -17,7 +17,6 @@ bool process_joystick(uint16_t keycode, keyrecord_t *record) {
     return true;
 }
 
-
 __attribute__((weak)) void joystick_task(void) {
     if (process_joystick_analogread() && (joystick_status.status & JS_UPDATED)) {
         send_joystick_packet(&joystick_status);