Move `RGBLIGHT_SPLIT` to data driven (#21190)

* Move `RGBLIGHT_SPLIT` to data driven

* Remove where `split_count` is already set

keyboards/aleblazer/zodiark/config.h

@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef RGBLIGHT_ENABLE
 #define RGBLED_NUM 68
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

keyboards/avalanche/v2/config.h

@@ -4,4 +4,3 @@
 #pragma once
 
 #define RGBLED_NUM 12
-#define RGBLIGHT_SPLIT

keyboards/avalanche/v3/config.h

@@ -4,4 +4,3 @@
 #pragma once
 
 #define RGBLED_NUM 12
-#define RGBLIGHT_SPLIT

keyboards/avalanche/v4/config.h

@@ -5,7 +5,6 @@
 
 #ifdef RGBLIGHT_ENABLE
 #    define RGBLED_NUM 64
-#    define RGBLIGHT_SPLIT
 #    define RGBLIGHT_HUE_STEP  10    
 #    define RGBLIGHT_SAT_STEP  17    
 #    define RGBLIGHT_VAL_STEP  17    

keyboards/bastardkb/tbk/config.h

@@ -18,7 +18,6 @@
 #pragma once
 
 #define RGBLED_NUM 38
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

keyboards/bluebell/swoop/config.h

@@ -29,7 +29,6 @@
   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
   #define RGBLIGHT_EFFECT_BREATHING
   #define RGBLED_NUM 36
-  #define RGBLIGHT_SPLIT
   #define RGBLIGHT_HUE_STEP 10
   #define RGBLIGHT_SAT_STEP 17
   #define RGBLIGHT_VAL_STEP 17

keyboards/crkbd/rev1/config.h

@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef RGBLIGHT_ENABLE
 #    define RGBLED_NUM 54 // Number of LEDs
-#    define RGBLIGHT_SPLIT
 #endif
 
 #ifdef RGB_MATRIX_ENABLE

keyboards/doppelganger/config.h

@@ -22,7 +22,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define USE_I2C
 
 #define RGBLED_NUM 2
-#define RGBLIGHT_SPLIT
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/draculad/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_STATIC_GRADIENT
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLED_NUM 10
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8

keyboards/draculad/info.json

@@ -8,6 +8,9 @@
         "pid": "0x1B1E",
         "device_version": "0.0.1"
     },
+    "rgblight": {
+        "split": true
+    },
     "ws2812": {
         "pin": "D3"
     },

keyboards/flxlb/zplit/config.h

@@ -30,7 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGBLED_NUM 16
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

keyboards/halfcliff/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { B4, E6, C6, B6, B2 }
 
    #define RGBLED_NUM 10
-   #define RGBLIGHT_SPLIT
    #define RGBLIGHT_HUE_STEP 8
    #define RGBLIGHT_SAT_STEP 8
    #define RGBLIGHT_VAL_STEP 8

keyboards/handwired/brain/config.h

@@ -44,8 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBLED_NUM 28  // Number of LEDs
 
-#define RGBLIGHT_SPLIT
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/handwired/brain/info.json

@@ -20,6 +20,7 @@
         "pin": "D3"
     },
     "rgblight": {
+        "split": true,
         "max_brightness": 120
     },
     "split": {

keyboards/handwired/freoduo/config.h

@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #if !defined(RGBLED_NUM)
 #    define RGBLED_NUM 30
-#    define RGBLIGHT_SPLIT
 #    define RGBLIGHT_LAYERS
 #endif
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h

@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // WS2812 RGB LED strip input and number of LEDs
 #define RGBLED_NUM      20
-#define RGBLIGHT_SPLIT
 
 #define AUDIO_PIN       C6
 

keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h

@@ -30,7 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define WS2812_DMA_CHANNEL  3  // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
 
 #define RGBLED_NUM          20
-#define RGBLIGHT_SPLIT
 
 #define DEBUG_LED_PIN C13
 

keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h

@@ -33,7 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 #define RGBLED_NUM          57
-#define RGBLIGHT_SPLIT
 
 #define DEBUG_LED_PIN      C13
 

keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h

@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // WS2812 RGB LED strip input and number of LEDs
 #define RGBLED_NUM      20
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_LIMIT_VAL 80
 
 #define DEBUG_LED_PIN   D6

keyboards/handwired/tsubasa/config.h

@@ -19,7 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MASTER_RIGHT
 
 #    define RGBLED_NUM 12
-#    define RGBLIGHT_SPLIT
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 1
 #    define RGBLIGHT_VAL_STEP 1

keyboards/helix/rev3_4rows/config.h

@@ -64,7 +64,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 #ifdef RGBLIGHT_ENABLE
-  #define RGBLIGHT_SPLIT
 //   #define RGBLIGHT_HUE_STEP 8
 //   #define RGBLIGHT_SAT_STEP 8
 //   #define RGBLIGHT_VAL_STEP 8

keyboards/helix/rev3_5rows/config.h

@@ -64,7 +64,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 #ifdef RGBLIGHT_ENABLE
-  #define RGBLIGHT_SPLIT
 //   #define RGBLIGHT_HUE_STEP 8
 //   #define RGBLIGHT_SAT_STEP 8
 //   #define RGBLIGHT_VAL_STEP 8

keyboards/hidtech/bastyl/config.h

@@ -19,7 +19,6 @@
 #pragma once
 
 #define RGBLED_NUM 38
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

keyboards/hidtech/bastyl/info.json

@@ -19,6 +19,9 @@
     "ws2812": {
         "pin": "D2"
     },
+    "rgblight": {
+        "split": true
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/jian/nsrev2/config.h

@@ -34,7 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 
 #define RGBLIGHT_SLEEP
-#define RGBLIGHT_SPLIT
 
 #ifndef IOS_DEVICE_ENABLE
 #if RGBLED_NUM <= 6

keyboards/jian/nsrev2/info.json

@@ -13,6 +13,9 @@
         "levels": 5,
         "breathing": true
     },
+    "rgblight": {
+        "split": true
+    },
     "ws2812": {
         "pin": "D4"
     },

keyboards/jian/rev1/config.h

@@ -87,7 +87,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 #define RGBLIGHT_SLEEP
-#define RGBLIGHT_SPLIT
 
 #ifndef IOS_DEVICE_ENABLE
 #if RGBLED_NUM <= 6

keyboards/jian/rev1/info.json

@@ -12,6 +12,9 @@
         "pin": "B6",
         "levels": 5
     },
+    "rgblight": {
+        "split": true
+    },
     "ws2812": {
         "pin": "D4"
     },

keyboards/jian/rev2/config.h

@@ -38,7 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 
 #define RGBLIGHT_SLEEP
-#define RGBLIGHT_SPLIT
 
 #ifndef IOS_DEVICE_ENABLE
 #if RGBLED_NUM <= 6

keyboards/jian/rev2/info.json

@@ -12,6 +12,9 @@
         "pin": "C6",
         "levels": 5
     },
+    "rgblight": {
+        "split": true
+    },
     "ws2812": {
         "pin": "D4"
     },

keyboards/jiran/rev2/config.h

@@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 56
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
 #define RGBLIGHT_VAL_STEP 17

keyboards/kagizaraya/scythe/config.h

@@ -16,7 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define RGBLIGHT_SPLIT 1
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

keyboards/kagizaraya/scythe/info.json

@@ -19,6 +19,9 @@
     "split": {
         "soft_serial_pin": "D0"
     },
+    "rgblight": {
+        "split": true
+    },
     "ws2812": {
         "pin": "F0"
     },

keyboards/kapl/rev1/config.h

@@ -6,7 +6,6 @@
 #define MASTER_LEFT
 
 #define RGBLED_NUM 88
-#define RGBLIGHT_SPLIT
 
 #define RGB_MATRIX_LED_COUNT 88
 #define RGB_MATRIX_SPLIT { 44, 44 }

keyboards/keycapsss/kimiko/rev1/config.h

@@ -18,7 +18,6 @@
 
 #ifdef RGBLIGHT_ENABLE
 #   define RGBLED_NUM 60  // Total number of LEDs
-#   define RGBLIGHT_SPLIT
 #endif
 
 // Limit the power draw

keyboards/lily58/glow_enc/config.h

@@ -21,5 +21,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGBLED_NUM 72    // Number of LEDs
-
-#define RGBLIGHT_SPLIT

keyboards/lily58/light/config.h

@@ -21,4 +21,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define RGBLED_NUM 70
-#define RGBLIGHT_SPLIT

keyboards/manta60/config.h

@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SELECT_SOFT_SERIAL_SPEED 1
 
 #    define RGBLED_NUM 68
-#    define RGBLIGHT_SPLIT
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    ifndef IOS_DEVICE_ENABLE

keyboards/mechwild/mokulua/mirrored/config.h

@@ -9,7 +9,6 @@
 
 #define MASTER_LEFT
 //#define MASTER_RIGHT
-#define RGBLIGHT_SPLIT
 #define SPLIT_LAYER_STATE_ENABLE
 #define SPLIT_LED_STATE_ENABLE
 #define SPLIT_MODS_ENABLE

keyboards/mechwild/mokulua/standard/config.h

@@ -9,7 +9,6 @@
 
 #define MASTER_LEFT
 //#define MASTER_RIGHT
-#define RGBLIGHT_SPLIT
 #define SPLIT_LAYER_STATE_ENABLE
 #define SPLIT_LED_STATE_ENABLE
 #define SPLIT_MODS_ENABLE

keyboards/merge/um70/config.h

@@ -20,7 +20,6 @@
 #define MASTER_LEFT
 #define SPLIT_MODS_ENABLE
 
-#define RGBLIGHT_SPLIT
 #define RGBLED_NUM 83
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM

keyboards/merge/um80/config.h

@@ -20,7 +20,6 @@
 #define MASTER_LEFT
 #define SPLIT_MODS_ENABLE
 
-#define RGBLIGHT_SPLIT
 #define RGBLED_NUM 100
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM

keyboards/meson/config.h

@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define USE_I2C
 
    #define RGBLED_NUM 10
-   #define RGBLIGHT_SPLIT
    #define RGBLIGHT_HUE_STEP 8
    #define RGBLIGHT_SAT_STEP 8
    #define RGBLIGHT_VAL_STEP 8

keyboards/mint60/config.h

@@ -23,7 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_RESYNC_ENABLE
 
 #define RGBLED_NUM 8
-#define RGBLIGHT_SPLIT
 
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17

keyboards/mint60/info.json

@@ -16,6 +16,9 @@
   "split": {
     "soft_serial_pin": "D2"
   },
+  "rgblight": {
+    "split": true
+  },
   "ws2812": {
     "pin": "D3"
   },

keyboards/mlego/m60_split/rev1/config.h

@@ -24,7 +24,6 @@
 #define SERIAL_USART_SPEED 921600
 
 #ifdef RGBLIGHT_ENABLE
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_LAYERS
 
 #define RGBLIGHT_DEFAULT_HUE 213

keyboards/mlego/m60_split/rev2/config.h

@@ -26,7 +26,6 @@
 
 
 #ifdef RGBLIGHT_ENABLE
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_LAYERS
 #define RGBLED_NUM 16
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/omkbd/ergodash/mini/config.h

@@ -40,7 +40,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 20
-#define RGBLIGHT_SPLIT
 
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/

keyboards/omkbd/ergodash/rev1/config.h

@@ -40,7 +40,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 24
-#define RGBLIGHT_SPLIT
 
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/

keyboards/omkbd/runner3680/3x6/config.h

@@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 36
-#define RGBLIGHT_SPLIT
 
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/

keyboards/omkbd/runner3680/3x7/config.h

@@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 42
-#define RGBLIGHT_SPLIT
 
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/

keyboards/omkbd/runner3680/3x8/config.h

@@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 48
-#define RGBLIGHT_SPLIT
 
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/

keyboards/omkbd/runner3680/4x6/config.h

@@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 48
-#define RGBLIGHT_SPLIT
 
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/

keyboards/omkbd/runner3680/4x7/config.h

@@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 56
-#define RGBLIGHT_SPLIT
 
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/

keyboards/omkbd/runner3680/4x8/config.h

@@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 64
-#define RGBLIGHT_SPLIT
 
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/

keyboards/omkbd/runner3680/5x6/config.h

@@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 60
-#define RGBLIGHT_SPLIT
 
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/

keyboards/omkbd/runner3680/5x6_5x8/config.h

@@ -37,7 +37,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 70
-#define RGBLIGHT_SPLIT
 #endif
 #ifdef RGB_MATRIX_ENABLE
 #define RGB_MATRIX_LED_COUNT 70

keyboards/omkbd/runner3680/5x7/config.h

@@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 70
-#define RGBLIGHT_SPLIT
 
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/

keyboards/omkbd/runner3680/5x8/config.h

@@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 80
-#define RGBLIGHT_SPLIT
 
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/

keyboards/rate/pistachio/rev1/config.h

@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define USE_I2C
 
 /* ws2812 RGB LED */
-#define RGBLIGHT_SPLIT
 #define RGBLED_NUM 2
 #define RGBLIGHT_LAYERS
 #define RGBLIGHT_HUE_STEP 10

keyboards/rate/pistachio/rev2/config.h

@@ -23,7 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SPLIT_HAND_MATRIX_GRID D4,D3
 
 /* ws2812 RGB LED */
-#define RGBLIGHT_SPLIT
 #define RGBLED_NUM 84
 #define RGBLIGHT_LAYERS
 #define RGBLIGHT_HUE_STEP 10

keyboards/redox/rev1/config.h

@@ -24,8 +24,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBLED_NUM 14    // Number of LEDs
 
-#define RGBLIGHT_SPLIT   // sync LEDs between RIGHT and LEFT hand
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/redox/rev1/info.json

@@ -8,6 +8,9 @@
     "pid": "0x5244",
     "device_version": "1.0.0"
   },
+  "rgblight": {
+    "split": true
+  },
   "layouts": {
     "LAYOUT": {
       "layout": [

keyboards/rura66/rev1/config.h

@@ -22,7 +22,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef RGBLIGHT_ENABLE
   #define RGBLED_NUM 66 // Number of LEDs
-  #define RGBLIGHT_SPLIT
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
   #define RGBLIGHT_VAL_STEP 8

keyboards/salicylic_acid3/7skb/rev1/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifndef RGBLED_NUM
   #define RGBLED_NUM 12
-  #define RGBLIGHT_SPLIT
 #endif
 
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/salicylic_acid3/7splus/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifndef RGBLED_NUM
   #define RGBLED_NUM 31
-  #define RGBLIGHT_SPLIT
 #endif
 
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/salicylic_acid3/ergoarrows/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifndef RGBLED_NUM
   #define RGBLED_NUM 86
-  #define RGBLIGHT_SPLIT
 #endif
 
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/salicylic_acid3/jisplit89/rev1/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifndef RGBLED_NUM
   #define RGBLED_NUM 32
-  #define RGBLIGHT_SPLIT
 #endif
 
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/salicylic_acid3/nknl7en/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifndef RGBLED_NUM
   #define RGBLED_NUM 21
-  #define RGBLIGHT_SPLIT
 #endif
 
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/salicylic_acid3/nknl7jp/config.h

@@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifndef RGBLED_NUM
   #define RGBLED_NUM 20
-  #define RGBLIGHT_SPLIT
 #endif
 
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/silverbullet44/config.h

@@ -19,7 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define MASTER_RIGHT
 
-  //#define RGBLIGHT_SPLIT
   #define RGBLED_NUM 52
   #ifdef RGB_MATRIX_ENABLE
     #define RGB_MATRIX_LED_COUNT 52

keyboards/viktus/sp_mini/config.h

@@ -35,7 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 
-//#define RGBLIGHT_SPLIT
 #define RGBLED_NUM 24    // Number of LEDs
 
 /*

keyboards/yoichiro/lunakey_mini/config.h

@@ -18,7 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
   #define RGBLED_NUM 12
-  #define RGBLIGHT_SPLIT
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
   #define RGBLIGHT_VAL_STEP 8