Move matrix config to info.json, part 5 (#20003)

Co-authored-by: Nick Brassel <nick@tzarc.org>

keyboards/abacus/config.h

@@ -17,24 +17,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D3, D2, D4, C6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, D7, B3, E6, B2, B4, B6, B5}
-
 #define DIP_SWITCH_PINS { D0 }
 
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
 #define RGB_DI_PIN D1
 
 #ifdef RGB_DI_PIN

keyboards/abacus/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "B1", "D7", "B3", "E6", "B2", "B4", "B6", "B5"],
+        "rows": ["D3", "D2", "D4", "C6"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "F1", "pin_b": "F0"}

keyboards/abstract/ellipse/rev1/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D3, C7 }
-#define MATRIX_COL_PINS { F0, B6, B5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN E6
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 3

keyboards/abstract/ellipse/rev1/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "B6", "B5"],
+        "rows": ["D3", "C7"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "B2", "pin_b": "B1", "resolution": 2},

keyboards/acekeyboard/titan60/config.h

@@ -17,26 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-
-//                         0   1   2   3   4   5   6   7   8   9   A   B   C   D
-#define MATRIX_ROW_PINS { B1, B2, B3, F0, F1 }
-#define MATRIX_COL_PINS { F4, F7, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3}
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D0
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 6

keyboards/acekeyboard/titan60/info.json

@@ -8,6 +8,11 @@
         "pid": "0x5449",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+      "cols": ["F4", "F7", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
+      "rows": ["B1", "B2", "B3", "F0", "F1"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
       "pin": "B7",
       "breathing": true

keyboards/acheron/apollo/87h/delta/config.h

@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-//                        C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15, C16 } 
-#define MATRIX_COL_PINS { C8 , C9 , A8 , A10, C7 , C6 , B14, B12, B10, B1 , C5 , C4 , A7 , B0 , C11, A3 , B4  }
-//                        R0 , R1 , R2 , R3 , R4 , R5 
-#define MATRIX_ROW_PINS { B3 , D2 , C12, A6 , A5 , A4 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/acheron/apollo/87h/delta/info.json

@@ -4,6 +4,11 @@
         "pid": "0x8775",
         "device_version": "0.0.4"
     },
+    "matrix_pins": {
+        "cols": ["C8", "C9", "A8", "A10", "C7", "C6", "B14", "B12", "B10", "B1", "C5", "C4", "A7", "B0", "C11", "A3", "B4"],
+        "rows": ["B3", "D2", "C12", "A6", "A5", "A4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F401",
     "bootloader": "stm32-dfu"
 }

keyboards/acheron/apollo/87h/gamma/config.h

@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-//                        C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15 }
-#define MATRIX_COL_PINS { B3 , A15, A10, A8 , B14, B12, B10, B1 , B0 , A7 , A4 , A5 , A6 , C15, A0 , A1  }
-//                        R0 , R1 , R2 , R3 , R4 , R5
-#define MATRIX_ROW_PINS { C14, C13, B9 , B4 , A3 , A2 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/acheron/apollo/87h/gamma/info.json

@@ -4,6 +4,11 @@
         "pid": "0x8774",
         "device_version": "0.0.3"
     },
+    "matrix_pins": {
+        "cols": ["B3", "A15", "A10", "A8", "B14", "B12", "B10", "B1", "B0", "A7", "A4", "A5", "A6", "C15", "A0", "A1"],
+        "rows": ["C14", "C13", "B9", "B4", "A3", "A2"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F411",
     "bootloader": "stm32-dfu"
 }

keyboards/acheron/apollo/87htsc/config.h

@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-//                        C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15, C16 } 
-#define MATRIX_COL_PINS { C8 , C9 , A8 , A10, C7 , C6 , B14, B12, B10, B1 , C5 , C4 , A7 , B0 , C11, A3 , B4  }
-//                        R0 , R1 , R2 , R3 , R4 , R5 
-#define MATRIX_ROW_PINS { B3 , D2 , C12, A6 , A5 , A4 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/acheron/apollo/87htsc/info.json

@@ -8,6 +8,11 @@
         "pid": "0x8776",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C8", "C9", "A8", "A10", "C7", "C6", "B14", "B12", "B10", "B1", "C5", "C4", "A7", "B0", "C11", "A3", "B4"],
+        "rows": ["B3", "D2", "C12", "A6", "A5", "A4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F401",
     "bootloader": "stm32-dfu",
     "layouts": {

keyboards/acheron/apollo/88htsc/config.h

@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-//                        C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15, C16 } 
-#define MATRIX_COL_PINS { C8 , C9 , A8 , A10, C7 , C6 , B14, B12, B10, B1 , C5 , C4 , A7 , B0 , C11, A3 , B4  }
-//                        R0 , R1 , R2 , R3 , R4 , R5 
-#define MATRIX_ROW_PINS { B3 , D2 , C12, A6 , A5 , A4 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/acheron/apollo/88htsc/info.json

@@ -8,6 +8,11 @@
         "pid": "0x8873",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C8", "C9", "A8", "A10", "C7", "C6", "B14", "B12", "B10", "B1", "C5", "C4", "A7", "B0", "C11", "A3", "B4"],
+        "rows": ["B3", "D2", "C12", "A6", "A5", "A4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F401",
     "bootloader": "stm32-dfu",
     "layouts": {

keyboards/acheron/arctic/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B0, A5, A4, A3, A2, A1, A0, F1, F0, C15, C14, C13, B9, B8}
-#define MATRIX_ROW_PINS { B7, B6, A6, A7, B1}
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/acheron/arctic/info.json

@@ -8,6 +8,11 @@
         "pid": "0x4152",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B0", "A5", "A4", "A3", "A2", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "B9", "B8"],
+        "rows": ["B7", "B6", "A6", "A7", "B1"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F072",
     "bootloader": "stm32-dfu",
     "layouts": {

keyboards/acheron/athena/alpha/config.h

@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_COL_PINS { A8 , B14, B12, B10, B1 , B0 , A5 , A4 , A3 , A2 , A1 , A0 , C15, A7 , B4 , B3 , A15 }
-#define MATRIX_ROW_PINS { B9 , C13, B8 , B5 , A14 , C14 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define LOCKING_SUPPORT_ENABLE
 #define LOCKING_RESYNC_ENABLE
 

keyboards/acheron/athena/alpha/info.json

@@ -4,6 +4,11 @@
         "pid": "0x6584",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A8", "B14", "B12", "B10", "B1", "B0", "A5", "A4", "A3", "A2", "A1", "A0", "C15", "A7", "B4", "B3", "A15"],
+        "rows": ["B9", "C13", "B8", "B5", "A14", "C14"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 20,

keyboards/acheron/athena/beta/config.h

@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_COL_PINS { C7 , C6 , B14, B12, B10, B1 , C4 , A7 , A6 , A5 , A4 , A3 , A2 , C5 , A10, A8 , C9 }
-#define MATRIX_ROW_PINS { C11, C12, C10, A15, C0 , A1 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define LOCKING_SUPPORT_ENABLE
 #define LOCKING_RESYNC_ENABLE
 

keyboards/acheron/athena/beta/info.json

@@ -4,6 +4,11 @@
         "pid": "0x6585",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["C7", "C6", "B14", "B12", "B10", "B1", "C4", "A7", "A6", "A5", "A4", "A3", "A2", "C5", "A10", "A8", "C9"],
+        "rows": ["C11", "C12", "C10", "A15", "C0", "A1"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B0",
         "levels": 20,

keyboards/acheron/austin/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B10, B11, B12, B13, B14, B15, A8, A9, A10, A5, A15, B3, B4, B5, B8, A3, C15, C14, F1 }
-#define MATRIX_ROW_PINS { C13, A4, A7, B0, B1, B2 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/acheron/austin/info.json

@@ -8,6 +8,11 @@
         "pid": "0x4175",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B10", "B11", "B12", "B13", "B14", "B15", "A8", "A9", "A10", "A5", "A15", "B3", "B4", "B5", "B8", "A3", "C15", "C14", "F1"],
+        "rows": ["C13", "A4", "A7", "B0", "B1", "B2"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/acheron/elongate/beta/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D3, B7, D5, B5, D6 }
-#define MATRIX_COL_PINS { F5, F6, F4, F1, F0, B2, B1, C6, B0, B3, E6, D4, B4}
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D7
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 16

keyboards/acheron/elongate/beta/info.json

@@ -8,6 +8,11 @@
         "pid": "0x454C",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "F6", "F4", "F1", "F0", "B2", "B1", "C6", "B0", "B3", "E6", "D4", "B4"],
+        "rows": ["D3", "B7", "D5", "B5", "D6"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "D1",
         "num_lock": "D2",

keyboards/acheron/elongate/delta/config.h

@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_COL_PINS { A10, A9, A8, B14, B12, B11, B10, B2, B1, A7, A5, B9, B8, B7, B6 }
-#define MATRIX_ROW_PINS { B3, A15, B0, B4, B5 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER PWMD3
 #define BACKLIGHT_PWM_CHANNEL 1
 #define BACKLIGHT_PAL_MODE 1

keyboards/acheron/elongate/delta/info.json

@@ -8,6 +8,11 @@
         "pid": "0x454D",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["A10", "A9", "A8", "B14", "B12", "B11", "B10", "B2", "B1", "A7", "A5", "B9", "B8", "B7", "B6"],
+        "rows": ["B3", "A15", "B0", "B4", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 20,

keyboards/acheron/keebspcb/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B12, A1, A0, F1, F0, C15, C14, C13, B9, B8, B7, B6, B5}
-#define MATRIX_ROW_PINS { B4, B3, A2, A3, A4}
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/acheron/keebspcb/info.json

@@ -8,6 +8,11 @@
         "pid": "0x4B45",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B12", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "B9", "B8", "B7", "B6", "B5"],
+        "rows": ["B4", "B3", "A2", "A3", "A4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F072",
     "bootloader": "stm32-dfu",
     "community_layouts": ["60_ansi_tsangan"],

keyboards/acheron/lasgweloth/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B12, A2 , A1 , A0 , F1 , F0 , C15, C14, C13, A7 , A6 , A5 , A4 , B7}
-#define MATRIX_ROW_PINS { B9 , B8 , A3 , B0 , B1 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/acheron/lasgweloth/info.json

@@ -8,6 +8,11 @@
         "pid": "0x7641",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B12", "A2", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "A7", "A6", "A5", "A4", "B7"],
+        "rows": ["B9", "B8", "A3", "B0", "B1"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F072",
     "bootloader": "stm32-dfu",
     "community_layouts": ["60_ansi", "60_ansi_split_bs_rshift"],

keyboards/acheron/shark/alpha/config.h

@@ -17,28 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS {B4, A15, B10, B2}
-#define MATRIX_COL_PINS {B1, B12, A1, A7, A5, A4, A3, A2, A0, C15, C14, C13}
-//{C13, C14, C15, A0,A2,A3,A4,A5,A6, A1,B12,B1}
-/* Unused pins, in the default layout, are:
-EncA (B6) because it is not used in the default PCB
-All Extra pins (A8, B15, B14, B13, B3, B5, B8, B9) , for the same reason;
-B0, which is unconnected on the PCB
-*/
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER PWMD3
 #define BACKLIGHT_PWM_CHANNEL 3
 

keyboards/acheron/shark/alpha/info.json

@@ -6,6 +6,11 @@
     "pid": "0x5368",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["B1", "B12", "A1", "A7", "A5", "A4", "A3", "A2", "A0", "C15", "C14", "C13"],
+    "rows": ["B4", "A15", "B10", "B2"]
+  },
+  "diode_direction": "COL2ROW",
   "encoder": {
     "rotary": [
       {"pin_a": "B6", "pin_b": "B7"}

keyboards/acheron/shark/beta/config.h

@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_COL_PINS { A5 , A10, C13, B9 , B8 , B5 , B4 , B3 , A15, A0 , A1 , A2 }
-#define MATRIX_ROW_PINS { A8 , B14, A4 , A3 }
-#define DIODE_DIRECTION COL2ROW
-
 #define LOCKING_SUPPORT_ENABLE
 #define LOCKING_RESYNC_ENABLE
 

keyboards/acheron/shark/beta/info.json

@@ -4,6 +4,11 @@
         "pid": "0x5369",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["A5", "A10", "C13", "B9", "B8", "B5", "B4", "B3", "A15", "A0", "A1", "A2"],
+        "rows": ["A8", "B14", "A4", "A3"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "C15", "pin_b": "C14"}

keyboards/ada/ada1800mini/config.h

@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, B3, B2, B1 }
-
-#define DIODE_DIRECTION COL2ROW
-
-
 //TODO: implement RGB matrix when I get the hardware
 #define RGB_DI_PIN F0
 #ifdef RGB_DI_PIN

keyboards/ada/ada1800mini/info.json

@@ -8,6 +8,11 @@
         "pid": "0x1800",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B3", "B2", "B1"],
+        "rows": ["D0", "D1", "D2", "D3", "D5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/ada/infinity81/config.h

@@ -3,23 +3,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B3, B2, B1, B0, F6, B7 }
-#define MATRIX_COL_PINS { D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F5, F1, F4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D0
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 107

keyboards/ada/infinity81/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0081",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F5", "F1", "F4"],
+        "rows": ["B3", "B2", "B1", "B0", "F6", "B7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/adelheid/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, F4, D1, D2, D3, D5, F7 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, F6, B6, D4, B1, B0, B7, B5, B4, D7, D6, B3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/adelheid/info.json

@@ -8,6 +8,11 @@
         "pid": "0xAD78",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "E6", "C7", "F6", "B6", "D4", "B1", "B0", "B7", "B5", "B4", "D7", "D6", "B3"],
+        "rows": ["D0", "F4", "D1", "D2", "D3", "D5", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "C6"
     },

keyboards/adkb96/info.json

@@ -8,6 +8,11 @@
 		"pid": "0xAD96",
 		"device_version": "0.0.1"
 	},
+	"matrix_pins": {
+		"cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+		"rows": ["D4", "C6", "D7", "E6", "B4", "B5"]
+	},
+	"diode_direction": "COL2ROW",
 	"split": {
 		"soft_serial_pin": "D0"
 	},

keyboards/adkb96/rev1/config.h

@@ -18,12 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 }
-
-#define DIODE_DIRECTION COL2ROW
-
 /* define tapping term */
 #define TAPPING_TERM 100
 

keyboards/adm42/config.h

@@ -16,9 +16,6 @@
 
 #pragma once
 
-
-#define DIODE_DIRECTION ROW2COL
-
 #define TAP_CODE_DELAY 1
 
 #if defined(CONSOLE_ENABLE)

keyboards/adm42/info.json

@@ -9,6 +9,11 @@
         "pid": "0xE873",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C6", "B6", "B5", "B4", "D7", "D6", "F0", "F1", "F4", "F5", "F6", "F7"],
+        "rows": ["C7", "D5", "D3", "D2"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layout_aliases": {

keyboards/adm42/rev4/config.h

@@ -16,9 +16,6 @@
 
 #pragma once
 
-#define MATRIX_COL_PINS { C6, B6, B5, B4, D7, D6, F0, F1, F4, F5, F6, F7 }
-#define MATRIX_ROW_PINS { C7, D5, D3, D2 }
-
 #define ADM42_LED E6
 
 #define RGB_DI_PIN B7

keyboards/adpenrose/akemipad/config.h

@@ -3,23 +3,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D4, D7, E6, B6, B4, B5 }
-#define MATRIX_COL_PINS { D3, D2, F5, F6, B2 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define TAP_CODE_DELAY 10
 
 /* Audio functionality */

keyboards/adpenrose/akemipad/info.json

@@ -7,6 +7,11 @@
         "pid": "0x0004",
         "vid": "0x4450"
     },
+    "matrix_pins": {
+        "cols": ["D3", "D2", "F5", "F6", "B2"],
+        "rows": ["D4", "D7", "E6", "B6", "B4", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "B1", "pin_b": "B3"}

keyboards/adpenrose/kintsugi/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B0, E6, D7, C6, D4, D2, F4, F5, B5, B4 }
-#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6, F0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define TAP_CODE_DELAY 10
 
 /* Underglow options: */

keyboards/adpenrose/kintsugi/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0001",
         "device_version": "1.0.0"
     },
+    "matrix_pins": {
+        "cols": ["F6", "F7", "B1", "B3", "B2", "B6", "F0"],
+        "rows": ["B0", "E6", "D7", "C6", "D4", "D2", "F4", "F5", "B5", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "B7", "pin_b": "D5"}

keyboards/adpenrose/obi/config.h

@@ -3,23 +3,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F5, C7, C6 }
-#define MATRIX_COL_PINS { F6, B7, B6, B4, B5, D6, D5, D3, D7, D4, D2, D1, D0, B0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define TAP_CODE_DELAY 10
 
 /* Underglow options: */

keyboards/adpenrose/obi/info.json

@@ -7,6 +7,11 @@
         "pid": "0x0002",
         "vid": "0x4450"
     },
+    "matrix_pins": {
+        "cols": ["F6", "B7", "B6", "B4", "B5", "D6", "D5", "D3", "D7", "D4", "D2", "D1", "D0", "B0"],
+        "rows": ["F4", "F5", "C7", "C6"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "F1", "pin_b": "F0"}

keyboards/adpenrose/shisaku/config.h

@@ -3,22 +3,5 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B2, B0, B1, D0, B4, D6, B3, D7 }
-#define MATRIX_COL_PINS { D1, C3, C4, D4, C0, C1, C2 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Solenoid pin */
 #define SOLENOID_PIN C5

keyboards/adpenrose/shisaku/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0003",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D1", "C3", "C4", "D4", "C0", "C1", "C2"],
+        "rows": ["B2", "B0", "B1", "D0", "B4", "D6", "B3", "D7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega328p",
     "bootloader": "usbasploader",
     "layouts": {

keyboards/aeboards/aegis/config.h

@@ -16,14 +16,6 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F5, F6, E6, F7, D1, D0, D6, D4, B4, D7, B6, B5 }
-#define MATRIX_COL_PINS { C7, C6, B7, D2, D3, B3, B2, B1, B0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/aeboards/aegis/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0807",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C7", "C6", "B7", "D2", "D3", "B3", "B2", "B1", "B0"],
+        "rows": ["F5", "F6", "E6", "F7", "D1", "D0", "D6", "D4", "B4", "D7", "B6", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/aeboards/constellation/rev1/config.h

@@ -17,14 +17,6 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, B1, F0, F1, F4 }
-#define MATRIX_COL_PINS { E6, D5, B2, B3, D3, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/aeboards/constellation/rev1/info.json

@@ -8,6 +8,11 @@
         "pid": "0x065C",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["E6", "D5", "B2", "B3", "D3", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["B0", "B1", "F0", "F1", "F4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/aeboards/constellation/rev2/config.h

@@ -16,14 +16,6 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B15, A14, A2, B13, B14 }
-#define MATRIX_COL_PINS { B12, A1, H0, C15, C14, B11, B10, B2, B1, B0, A7, A6, A5, A4, A3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/aeboards/constellation/rev2/info.json

@@ -8,6 +8,11 @@
         "pid": "0x065C",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B12", "A1", "H0", "C15", "C14", "B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3"],
+        "rows": ["B15", "A14", "A2", "B13", "B14"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32L422",
     "bootloader": "stm32-dfu",
     "layouts": {

keyboards/aeboards/constellation/rev3/config.h

@@ -17,14 +17,6 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, B1, F0, F1, F4 }
-#define MATRIX_COL_PINS { E6, D5, B2, B3, D3, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/aeboards/constellation/rev3/info.json

@@ -8,6 +8,11 @@
         "pid": "0x065D",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["E6", "D5", "B2", "B3", "D3", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["B0", "B1", "F0", "F1", "F4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/afternoonlabs/breeze/rev0/config.h

@@ -16,12 +16,4 @@
 
 #pragma once
 
-// wiring of each half
-#define MATRIX_ROW_PINS \
-    { F4, F5, F6, F7, B1 }
-#define MATRIX_COL_PINS \
-    { B2, D1, D0, D4, C6, D7, E6, B4, B5 }
-
 #define SPLIT_HAND_PIN B3
-
-#define DIODE_DIRECTION COL2ROW

keyboards/afternoonlabs/breeze/rev0/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0001",
         "device_version": "0.0.0"
     },
+    "matrix_pins": {
+        "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
+        "rows": ["F4", "F5", "F6", "F7", "B1"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D2"
     },

keyboards/afternoonlabs/breeze/rev1/config.h

@@ -16,12 +16,4 @@
 
 #pragma once
 
-// wiring of each half
-#define MATRIX_ROW_PINS \
-    { F4, F5, F6, F7, B1 }
-#define MATRIX_COL_PINS \
-    { B2, D1, D0, D4, C6, D7, E6, B4, B5 }
-
 #define SPLIT_HAND_PIN B3
-
-#define DIODE_DIRECTION COL2ROW

keyboards/afternoonlabs/breeze/rev1/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
+        "rows": ["F4", "F5", "F6", "F7", "B1"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D2"
     },

keyboards/afternoonlabs/gust/rev1/config.h

@@ -1,23 +0,0 @@
-/* Copyright 2021 eithanshavit
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { F5, F4, D0 }
-#define MATRIX_COL_PINS { D1, D2, D3 }
-
-#define DIODE_DIRECTION COL2ROW

keyboards/afternoonlabs/gust/rev1/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0002",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D1", "D2", "D3"],
+        "rows": ["F5", "F4", "D0"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

keyboards/afternoonlabs/oceanbreeze/rev1/config.h

@@ -16,12 +16,4 @@
 
 #pragma once
 
-// wiring of each half
-#define MATRIX_ROW_PINS \
-    { F4, F5, F6, F7, B1, B6 }
-#define MATRIX_COL_PINS \
-    { B2, D1, D0, D4, C6, D7, E6, B4, B5 }
-
 #define SPLIT_HAND_PIN B3
-
-#define DIODE_DIRECTION COL2ROW

keyboards/afternoonlabs/oceanbreeze/rev1/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0003",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
+        "rows": ["F4", "F5", "F6", "F7", "B1", "B6"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D2"
     },

keyboards/afternoonlabs/southern_breeze/rev1/config.h

@@ -16,12 +16,4 @@
 
 #pragma once
 
-// wiring of each half
-#define MATRIX_ROW_PINS \
-    { F4, F5, F6, F7, B1 }
-#define MATRIX_COL_PINS \
-    { B2, D1, D0, D4, C6, D7, E6, B4, B5 }
-
 #define SPLIT_HAND_PIN B3
-
-#define DIODE_DIRECTION COL2ROW

keyboards/afternoonlabs/southern_breeze/rev1/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0005",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
+        "rows": ["F4", "F5", "F6", "F7", "B1"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D2"
     },

keyboards/afternoonlabs/summer_breeze/rev1/config.h

@@ -16,12 +16,4 @@
 
 #pragma once
 
-// wiring of each half
-#define MATRIX_ROW_PINS \
-    { F4, F5, F6, F7, B1 }
-#define MATRIX_COL_PINS \
-    { B2, D1, D0, D4, C6, D7, E6, B4, B5 }
-
 #define SPLIT_HAND_PIN B3
-
-#define DIODE_DIRECTION COL2ROW

keyboards/afternoonlabs/summer_breeze/rev1/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0004",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
+        "rows": ["F4", "F5", "F6", "F7", "B1"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D2"
     },

keyboards/ai03/andromeda/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { A10, A9, A8, B15, B14, B13, B12, B11, B10, B2, B1, B0, A7, A6, B5, B8, B9 }
-#define MATRIX_ROW_PINS { B4, B3, A15, A3, A4, A5 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/ai03/andromeda/info.json

@@ -8,6 +8,11 @@
         "pid": "0x000A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A10", "A9", "A8", "B15", "B14", "B13", "B12", "B11", "B10", "B2", "B1", "B0", "A7", "A6", "B5", "B8", "B9"],
+        "rows": ["B4", "B3", "A15", "A3", "A4", "A5"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "A2",
         "scroll_lock": "A1",

keyboards/ai03/equinox/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D3, C5, D4, D5 }
-#define MATRIX_COL_PINS { D1, D2, C6, C7, B6, B5, B4, B3, B2, B1, B0, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/ai03/equinox/rev0/config.h

@@ -1,22 +0,0 @@
-/*
-Copyright 2019 Ryota Goto
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-// Fix for prototype missing COL0, COL1, using backlight and RGB underglow I/O pins
-#undef MATRIX_COL_PINS
-#define MATRIX_COL_PINS { C4, B7, C6, C7, B6, B5, B4, B3, B2, B1, B0, D6 }

keyboards/ai03/equinox/rev0/info.json

@@ -1,4 +1,9 @@
 {
+    "matrix_pins": {
+        "cols": ["C4", "B7", "C6", "C7", "B6", "B5", "B4", "B3", "B2", "B1", "B0", "D6"],
+        "rows": ["D3", "C5", "D4", "D5"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "D1",
         "levels": 5,

keyboards/ai03/equinox/rev1/info.json

@@ -1,4 +1,9 @@
 {
+    "matrix_pins": {
+        "cols": ["D1", "D2", "C6", "C7", "B6", "B5", "B4", "B3", "B2", "B1", "B0", "D6"],
+        "rows": ["D3", "C5", "D4", "D5"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7",
         "levels": 5,

keyboards/ai03/jp60/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B6, B5, B4, D7, E6 }
-#define MATRIX_COL_PINS { D2, D1, D3, D5, D4, D6, C6, F0, F1, F4, F5, F6, F7, C7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/ai03/jp60/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0024",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D2", "D1", "D3", "D5", "D4", "D6", "C6", "F0", "F1", "F4", "F5", "F6", "F7", "C7"],
+        "rows": ["B6", "B5", "B4", "D7", "E6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/ai03/lunar/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B3, D0, D1, D2, D3 }
-#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/ai03/lunar/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0"],
+        "rows": ["B3", "D0", "D1", "D2", "D3"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/ai03/orbit/config.h

@@ -17,25 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F7, F6, F5, F4, D3 }
-#define MATRIX_COL_PINS { C7, B4, D7, D6, D4, F1, F0 }
-#define MATRIX_ROW_PINS_RIGHT { B6, B5, B4, D7, E6 }
-#define MATRIX_COL_PINS_RIGHT { D4, D6, F1, F0, F4, F5, C6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 
 #define SPLIT_LED_STATE_ENABLE

keyboards/ai03/orbit/info.json

@@ -8,11 +8,22 @@
         "pid": "0x0003",
         "device_version": "0.0.3"
     },
+    "matrix_pins": {
+        "cols": ["C7", "B4", "D7", "D6", "D4", "F1", "F0"],
+        "rows": ["F7", "F6", "F5", "F4", "D3"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7"
     },
     "split": {
-        "soft_serial_pin": "D0"
+        "soft_serial_pin": "D0",
+        "matrix_pins": {
+            "right": {
+                "cols": ["D4", "D6", "F1", "F0", "F4", "F5", "C6"],
+                "rows": ["B6", "B5", "B4", "D7", "E6"]
+            }
+        }
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",

keyboards/ai03/orbit_x/config.h

@@ -17,25 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D7, D6, D4, F0 }
-#define MATRIX_COL_PINS { E6, F6, B1, B0, C7, C6 }
-#define MATRIX_ROW_PINS_RIGHT { B5, D7, B4, D4 }
-#define MATRIX_COL_PINS_RIGHT { D6, B6, B1, B0, B3, B2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define SPLIT_HAND_PIN D5
 #define SPLIT_USB_DETECT
 #define SPLIT_USB_TIMEOUT 2500

keyboards/ai03/orbit_x/info.json

@@ -8,8 +8,19 @@
         "pid": "0x0014",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["E6", "F6", "B1", "B0", "C7", "C6"],
+        "rows": ["D7", "D6", "D4", "F0"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
-        "soft_serial_pin": "D0"
+        "soft_serial_pin": "D0",
+        "matrix_pins": {
+            "right": {
+                "cols": ["D6", "B6", "B1", "B0", "B3", "B2"],
+                "rows": ["B5", "D7", "B4", "D4"]
+            }
+        }
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",

keyboards/ai03/polaris/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B1, B2, B3, F0, F1 }
-#define MATRIX_COL_PINS { F4, F7, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D2
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 14

keyboards/ai03/polaris/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0002",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F7", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
+        "rows": ["B1", "B2", "B3", "F0", "F1"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7",
         "levels": 5,

keyboards/ai03/quasar/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, D4, D6, D7 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/ai03/quasar/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0010",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B0", "B1", "B2", "B3", "B7", "F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4"],
+        "rows": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/ai03/soyuz/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D4, C6, B6, E6, B4 }
-#define MATRIX_COL_PINS { F4, B3, D7, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/ai03/soyuz/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0018",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "B3", "D7", "B5"],
+        "rows": ["D4", "C6", "B6", "E6", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["ortho_5x4", "numpad_5x4"],

keyboards/ai03/vega/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B5, A3, A9, A8, B15, B14, B13, B12, B11, B10, B2, B1, B0, A7, A6 }
-#define MATRIX_ROW_PINS { A1, A2, B3, A15, A10 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/ai03/vega/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0015",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B5", "A3", "A9", "A8", "B15", "B14", "B13", "B12", "B11", "B10", "B2", "B1", "B0", "A7", "A6"],
+        "rows": ["A1", "A2", "B3", "A15", "A10"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F072",
     "bootloader": "stm32-dfu",
     "layouts": {

keyboards/ai03/voyager60_alps/config.h

@@ -14,12 +14,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS { B1, B2, B3, F0, F1 }
-#define MATRIX_COL_PINS { F4, F7, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3}
-
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D2
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 14

keyboards/ai03/voyager60_alps/info.json

@@ -8,6 +8,11 @@
         "pid": "0x060A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F7", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
+        "rows": ["B1", "B2", "B3", "F0", "F1"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/akb/eb46/config.h

@@ -1,37 +0,0 @@
-/*
-Copyright 2019 Elliot Powell
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
-  { B5, B4, D7, B6 }
-#define MATRIX_COL_PINS \
-  { B0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D4, D6, C6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW

keyboards/akb/eb46/info.json

@@ -7,6 +7,11 @@
         "pid": "0xFEED",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "C6"],
+        "rows": ["B5", "B4", "D7", "B6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/akb/raine/config.h

@@ -16,16 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS \
-  { E6, C6, F7, B2, B0 }
-#define MATRIX_COL_PINS \
-  { F6, F5, F4, B1, F1, F0, B3, B7, D0, D1, D2, D3, D5, D4, D6, D7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */