Fix use of `via.h` (#26316)

keyboards/cipulot/common/via_ec.c

@@ -16,13 +16,13 @@
 #include "ec_switch_matrix.h"
 #include "action.h"
 #include "print.h"
-#include "via.h"
 
 #ifdef SPLIT_KEYBOARD
 #    include "transactions.h"
 #endif
 
 #ifdef VIA_ENABLE
+#    include "via.h"
 
 void ec_rescale_values(uint8_t item);
 void ec_save_threshold_data(uint8_t option);

keyboards/hs60/v2/ansi/ansi.h

@@ -17,4 +17,3 @@
 
 #include "quantum.h"
 #include "../../wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/hs60/v2/hhkb/hhkb.h

@@ -17,4 +17,3 @@
 
 #include "quantum.h"
 #include "../../wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/hs60/v2/iso/iso.h

@@ -17,4 +17,3 @@
 
 #include "quantum.h"
 #include "../../wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/keebwerk/mega/ansi/ansi.h

@@ -17,4 +17,3 @@
 
 #include "quantum.h"
 #include "../wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/keychron/common/keychron_common.h

@@ -20,10 +20,6 @@
 #include <stdbool.h>
 #include "action.h"
 
-#ifdef VIA_ENABLE
-#    include "via.h"
-#endif
-
 #include "quantum_keycodes.h"
 
 enum custom_keycodes {

keyboards/novelkeys/nk87/nk87.h

@@ -17,4 +17,3 @@
 
 #include "quantum.h"
 #include "../wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/rocketboard_16/keycode_lookup.c

@@ -19,7 +19,6 @@
 #include "quantum_keycodes.h"
 #include "keymap_us.h"
 #include "print.h"
-#include "via.h"
 #include "util.h"
 
 #define num_keycodes ARRAY_SIZE(lookup_table)

keyboards/tkc/portico/portico.h

@@ -20,5 +20,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 #ifdef RGB_BACKLIGHT_PORTICO
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"
 #endif

keyboards/tkc/portico75/portico75.h

@@ -22,5 +22,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef RGB_BACKLIGHT_PORTICO75
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"
 #endif

keyboards/wilba_tech/rama_works_kara/rama_works_kara.h

@@ -17,4 +17,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/wilba_tech/rama_works_koyu/rama_works_koyu.h

@@ -18,4 +18,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/wilba_tech/rama_works_m10_c/rama_works_m10_c.h

@@ -17,4 +17,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/wilba_tech/rama_works_m50_a/rama_works_m50_a.h

@@ -17,4 +17,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/wilba_tech/rama_works_m60_a/rama_works_m60_a.h

@@ -17,4 +17,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/wilba_tech/rama_works_m65_b/rama_works_m65_b.h

@@ -18,4 +18,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/wilba_tech/rama_works_m65_bx/rama_works_m65_bx.h

@@ -18,4 +18,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/wilba_tech/rama_works_u80_a/rama_works_u80_a.h

@@ -18,4 +18,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/wilba_tech/via_test.c

@@ -1,132 +0,0 @@
-// Copyright 2022 Jason Williams (@wilba)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-// This is a test harness for VIA custom UI.
-//
-// It handles channel IDs 0-7, value IDs 0-7.
-//
-// It's useful for testing custom UI on a PCB without compiling in
-// features, especially features that will cause firmware to freeze
-// if the PCB doesn't have support.
-// 
-// To use:
-// - add `SRC = keyboards/wilba_tech/via_test.c` to rules.mk
-// - add `#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 128` to config.h
-//   (or change to match CHANNELS*VALUES*2)
-
-#include "via.h"
-
-#ifdef VIA_ENABLE
-
-#define CHANNELS 8
-#define VALUES 8
-uint8_t g_value[CHANNELS][VALUES][2];
-
-void values_init(void)
-{
-    for ( uint8_t channel_id = 0; channel_id < CHANNELS; channel_id++ ) {
-        for ( uint8_t value_id = 0; value_id < VALUES; value_id++ ) {
-            g_value[channel_id][value_id][0] = 0x00;
-            g_value[channel_id][value_id][1] = 0x00;
-        }
-    }
-}
-
-void values_load(void)
-{
-    eeprom_read_block( g_value, ((void*)VIA_EEPROM_CUSTOM_CONFIG_ADDR), VIA_EEPROM_CUSTOM_CONFIG_SIZE );
-}
-
-void values_save(void)
-{
-    eeprom_update_block( g_value, ((void*)VIA_EEPROM_CUSTOM_CONFIG_ADDR), VIA_EEPROM_CUSTOM_CONFIG_SIZE );
-}
-
-// We do this to test if VIA is sending save commands per channel
-// Not relevant for real situations
-void values_save_on_channel(uint8_t channel_id)
-{
-    uint16_t offset = channel_id * VALUES * 2;
-    eeprom_update_block( ((void*)g_value) + offset,
-        ((void*)VIA_EEPROM_CUSTOM_CONFIG_ADDR) + offset,
-        VALUES * 2 );
-}
-
-void via_init_kb(void)
-{
-    values_init();
-
-    // If the EEPROM has the magic, the data is good.
-    // OK to load from EEPROM
-    if (via_eeprom_is_valid()) {
-        values_load();
-    } else	{
-        values_save();
-        // DO NOT set EEPROM valid here, let caller do this
-    }
-}
-
-void set_value( uint8_t channel_id, uint8_t *data )
-{
-    // data = [ value_id, value_data ]
-    uint8_t *value_id = &(data[0]);
-    uint8_t *value_data = &(data[1]);
-    if ( *value_id >= 0 && *value_id < VALUES ) {
-        g_value[channel_id][*value_id][0] = value_data[0];
-        g_value[channel_id][*value_id][1] = value_data[1];
-    }
-}
-
-void get_value( uint8_t channel_id, uint8_t *data )
-{
-    // data = [ value_id, value_data ]
-    uint8_t *value_id = &(data[0]);
-    uint8_t *value_data = &(data[1]);
-    if ( *value_id >= 0 && *value_id < VALUES ) {
-        value_data[0] = g_value[channel_id][*value_id][0];
-        value_data[1] = g_value[channel_id][*value_id][1];
-    }
-}
-
-void via_custom_value_command(uint8_t *data, uint8_t length) {
-    // data = [ command_id, channel_id, value_id, value_data ]
-    uint8_t *command_id        = &(data[0]);
-    uint8_t *channel_id        = &(data[1]);
-    uint8_t *value_id_and_data = &(data[2]);
-
-    if ( *channel_id >= 0 && *channel_id < CHANNELS ) {
-        switch ( *command_id )
-        {
-            case id_custom_set_value:
-            {
-                set_value(*channel_id,value_id_and_data);
-                break;
-            }
-            case id_custom_get_value:
-            {
-                get_value(*channel_id,value_id_and_data);
-                break;
-            }
-            case id_custom_save:
-            {
-                //for ( uint8_t i=0; i<CHANNELS; i++) {
-                    values_save_on_channel(*channel_id);
-                //}
-                break;
-            }
-            default:
-            {
-                // Unhandled message.
-                *command_id = id_unhandled;
-                break;
-            }
-        }
-        return;
-    }
-    else {
-        *command_id = id_unhandled;
-    }
-
-    // DO NOT call raw_hid_send(data,length) here, let caller do this
-}
-#endif // VIA_ENABLE

keyboards/wilba_tech/wt60_b/wt60_b.h

@@ -18,4 +18,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/wilba_tech/wt60_bx/wt60_bx.h

@@ -18,4 +18,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/wilba_tech/wt60_c/wt60_c.h

@@ -18,4 +18,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/wilba_tech/wt_main.c

@@ -24,9 +24,8 @@
 #include "keyboards/wilba_tech/wt_mono_backlight.h"
 #endif // MONO_BACKLIGHT_ENABLED
 
-#include "via.h"
-
 #ifndef VIA_ENABLE
+#include "via.h"
 #include "eeprom.h"
 #include "version.h" // for QMK_BUILDDATE used in EEPROM magic
 #endif

keyboards/wilba_tech/zeal60/zeal60.h

@@ -17,4 +17,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/wilba_tech/zeal65/zeal65.h

@@ -17,4 +17,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"

keyboards/xelus/dawn60/rev1/rev1.h

@@ -17,4 +17,3 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"