Ryan fe6d6cf76d Remove empty override functions (#14312) 4 years ago
..
keymaps a030950fd6 [Keyboard] Fix compile size for the Vitamins Included via keymap (#13696) 5 years ago
rev1 fe6d6cf76d Remove empty override functions (#14312) 4 years ago
rev2 fe6d6cf76d Remove empty override functions (#14312) 4 years ago
.noci c0dcee96a8 Initial list of keyboards to exclude from CI (#11213) 5 years ago
config.h a030950fd6 [Keyboard] Fix compile size for the Vitamins Included via keymap (#13696) 5 years ago
info.json 19a85015c2 [Keyboard] Added Vitamins Included Rev2 (#6593) 7 years ago
readme.md 19a85015c2 [Keyboard] Added Vitamins Included Rev2 (#6593) 7 years ago
rules.mk 4b453dca92 Remove MIDI Configuration boilerplate (#11151) 5 years ago
vitamins_included.c 7c691d82bf Remove ONEHAND_ENABLE (#13920) 5 years ago
vitamins_included.h 1646c0f26c 2021 May 29 Breaking Changes Update (#13034) 5 years ago

readme.md

Let's Split Vitamins Included

Let's Split Vitamins included, assmebled in 3D printed case

This readme and most of the code are from the lets split readme

Quick links

REV1
REV2

Hardware

Hardware files for the Let's Split vitamins included are stored here

Features

Some features supported by the firmware:

  • Either half can connect to the computer via USB, or both halves can be used independently.
  • Optional support for I2C connection between the two halves if for some reason you require a faster connection between the two halves. Note that this requires 4 conductors between halves, and as such requires a TRRS cable.

Required Hardware

|Amount| Description | |--|--| | 1 | PCB kit from novelkeys | | 48 | MX compatible switches | | 48 | 1U keycaps | 1 | Mini-usb-B cable or USB-C cable for rev2. Keep in mind rev2.0 doesn't work with USB-C <> USB-C cables| | 1 | TRS / TRRS cable

Optional Hardware

A speaker can be hooked-up to the footprint on the PCBs. It is already enabled in the default firmware.

WS2812 LEDs can be added to the board. Check the different revision readme for specifics.

Using I2C

On the left half PCB, there's two pads labled I2C Pullup if you want to use I2C, you need to bridge those two solder jumpers with a soldering iron.

You can change your configuration between serial and i2c by modifying your config.h file.