Zach White c0dcee96a8 Initial list of keyboards to exclude from CI (#11213) 5 yıl önce
..
keymaps 195be50745 [Keyboard] Vitamins included VIA support (#8876) 6 yıl önce
rev1 c0dcee96a8 Initial list of keyboards to exclude from CI (#11213) 5 yıl önce
rev2 f78896589e Update vitamins included default keymap, enable NKRO, rev2 rgbsplit (#8871) 6 yıl önce
.noci c0dcee96a8 Initial list of keyboards to exclude from CI (#11213) 5 yıl önce
config.h f8bf1d1b16 Changed to 1209 PID (#6677) 7 yıl önce
info.json 19a85015c2 [Keyboard] Added Vitamins Included Rev2 (#6593) 7 yıl önce
readme.md 19a85015c2 [Keyboard] Added Vitamins Included Rev2 (#6593) 7 yıl önce
rules.mk 92385b3fb6 Better handle LTO_ENABLE (#9832) 6 yıl önce
vitamins_included.c 00596d55e3 Added propper support for Lets split vitamins (#2559) 8 yıl önce
vitamins_included.h 19a85015c2 [Keyboard] Added Vitamins Included Rev2 (#6593) 7 yıl önce

readme.md

Let's Split Vitamins Included

Let's Split Vitamins included, assmebled in 3D printed case

This readme and most of the code are from the lets split readme

Quick links

REV1
REV2

Hardware

Hardware files for the Let's Split vitamins included are stored here

Features

Some features supported by the firmware:

  • Either half can connect to the computer via USB, or both halves can be used independently.
  • Optional support for I2C connection between the two halves if for some reason you require a faster connection between the two halves. Note that this requires 4 conductors between halves, and as such requires a TRRS cable.

Required Hardware

|Amount| Description | |--|--| | 1 | PCB kit from novelkeys | | 48 | MX compatible switches | | 48 | 1U keycaps | 1 | Mini-usb-B cable or USB-C cable for rev2. Keep in mind rev2.0 doesn't work with USB-C <> USB-C cables| | 1 | TRS / TRRS cable

Optional Hardware

A speaker can be hooked-up to the footprint on the PCBs. It is already enabled in the default firmware.

WS2812 LEDs can be added to the board. Check the different revision readme for specifics.

Using I2C

On the left half PCB, there's two pads labled I2C Pullup if you want to use I2C, you need to bridge those two solder jumpers with a soldering iron.

You can change your configuration between serial and i2c by modifying your config.h file.