|
|
5 yıl önce | |
|---|---|---|
| .. | ||
| keymaps | 6cf574396a [Keyboard] Update default keymaps to use `layer_state_t` (#7444) | 6 yıl önce |
| config.h | f325bd6eb2 Remove `DESCRIPTION`, B-D (#11513) | 5 yıl önce |
| divergetm2.c | dd29b64256 Keyboard: Add support for Diverge TM2 (#3829) | 8 yıl önce |
| divergetm2.h | 9bb4e63a11 Remove old promicro_bootloader_jmp() declarations (#6444) | 7 yıl önce |
| info.json | 419f2c3f40 [Keyboard] QMK Configurator support for Diverge TM 2(#5943) | 7 yıl önce |
| readme.md | dd29b64256 Keyboard: Add support for Diverge TM2 (#3829) | 8 yıl önce |
| rules.mk | 66fe3001e4 Trim firmware sizes from default rules.mk, part 1 (#8027) | 6 yıl önce |
A 4x6x2 split ortholinear keyboard with 2u spacebars like the Levinson (similar to Let's Split). Made by Unikeyboard.
Keyboard Maintainer: IslandMan93 and xton
Hardware Supported: Pro Micro
Hardware Availability: Diverge TM2
Make example for this keyboard (after setting up your build environment):
make divergetm2:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Disassemble the case so you have access to each Pro Micro. Flash each half with QMK Toolbox by connecting the USB cable and shorting RST and GND. After that, just use the soft reset key on your respective layout to reflash both halves.
Reflashing the stock firmware is pretty easy. Just follow the same steps in the original guide. You will have to manually reset the Pro Micro (by shorting the GND and RST) during the upload step. Then reapply your keymap through Arbites.