|
|
5 سال پیش | |
|---|---|---|
| .. | ||
| keymaps | 35b329052c [Keyboard] Add Viktus Styrka (#10982) | 5 سال پیش |
| chconf.h | bdb757e189 ChibiOS conf migrations... take 11 (#11646) | 5 سال پیش |
| config.h | 35b329052c [Keyboard] Add Viktus Styrka (#10982) | 5 سال پیش |
| info.json | 58e733b5a0 remove keyboard_folder from info.json | 5 سال پیش |
| readme.md | 35b329052c [Keyboard] Add Viktus Styrka (#10982) | 5 سال پیش |
| rules.mk | 9dcd03b6ca Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) | 5 سال پیش |
| styrka.c | 35b329052c [Keyboard] Add Viktus Styrka (#10982) | 5 سال پیش |
| styrka.h | 35b329052c [Keyboard] Add Viktus Styrka (#10982) | 5 سال پیش |
The Viktus Styrka is a 65% + left macro block created in a collaboration of OneCreativeMind and BlindAssassin111 (Viktus owner). All design done by BlindAssassin111. The board supports ANSI and ISO modifiers as well as split backspace and stepped/non-stepped caps lock.
The PCB is an arm powered board utilizing the STM32F072CBT6 mcu. The PCB is designed to work with the universal daughterboard and a 4in (~100mm) 4 pin JST SR cable with reversed pinout (pin 1 of both connectors is the same wire etc.).
On the PCB is a single button for a reset for flashing. As well, there is a Segger J-Link 6-pin Needle Adapter footprint for reflashing the mcu as a backup in case of a bootloader issue.
Make example for this keyboard (after setting up your build environment):
make viktus/styrka:default
Flashing example for this keyboard:
make viktus/styrka:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.