Zach White 38d8d5445e Remove KEYMAP and LAYOUT_kc (#12160) 5 лет назад
..
keymaps 195be50745 [Keyboard] Vitamins included VIA support (#8876) 6 лет назад
rev1 c80e5f9f88 Audio system overhaul (#11820) 5 лет назад
rev2 c80e5f9f88 Audio system overhaul (#11820) 5 лет назад
.noci c0dcee96a8 Initial list of keyboards to exclude from CI (#11213) 5 лет назад
config.h f8bf1d1b16 Changed to 1209 PID (#6677) 7 лет назад
info.json 19a85015c2 [Keyboard] Added Vitamins Included Rev2 (#6593) 7 лет назад
readme.md 19a85015c2 [Keyboard] Added Vitamins Included Rev2 (#6593) 7 лет назад
rules.mk 92385b3fb6 Better handle LTO_ENABLE (#9832) 6 лет назад
vitamins_included.c f0b30e0027 Make Swap Hands use PROGMEM (#12284) 5 лет назад
vitamins_included.h 38d8d5445e Remove KEYMAP and LAYOUT_kc (#12160) 5 лет назад

readme.md

Let's Split Vitamins Included

Let's Split Vitamins included, assmebled in 3D printed case

This readme and most of the code are from the lets split readme

Quick links

REV1
REV2

Hardware

Hardware files for the Let's Split vitamins included are stored here

Features

Some features supported by the firmware:

  • Either half can connect to the computer via USB, or both halves can be used independently.
  • Optional support for I2C connection between the two halves if for some reason you require a faster connection between the two halves. Note that this requires 4 conductors between halves, and as such requires a TRRS cable.

Required Hardware

|Amount| Description | |--|--| | 1 | PCB kit from novelkeys | | 48 | MX compatible switches | | 48 | 1U keycaps | 1 | Mini-usb-B cable or USB-C cable for rev2. Keep in mind rev2.0 doesn't work with USB-C <> USB-C cables| | 1 | TRS / TRRS cable

Optional Hardware

A speaker can be hooked-up to the footprint on the PCBs. It is already enabled in the default firmware.

WS2812 LEDs can be added to the board. Check the different revision readme for specifics.

Using I2C

On the left half PCB, there's two pads labled I2C Pullup if you want to use I2C, you need to bridge those two solder jumpers with a soldering iron.

You can change your configuration between serial and i2c by modifying your config.h file.