update twi2c to do standard master stuff

drivers/arm/is31fl3731.c

@@ -0,0 +1,242 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "is31fl3731.h"
+#include <util/delay.h>
+#include <string.h>
+#include "twi2c.h"
+#include "progmem.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define ISSI_ADDR_DEFAULT 0x74
+
+#define ISSI_REG_CONFIG  0x00
+#define ISSI_REG_CONFIG_PICTUREMODE 0x00
+#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
+#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
+
+#define ISSI_CONF_PICTUREMODE 0x00
+#define ISSI_CONF_AUTOFRAMEMODE 0x04
+#define ISSI_CONF_AUDIOMODE 0x08
+
+#define ISSI_REG_PICTUREFRAME  0x01
+
+#define ISSI_REG_SHUTDOWN 0x0A
+#define ISSI_REG_AUDIOSYNC 0x06
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][144];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[DRIVER_COUNT][18] = { { 0 }, { 0 } };
+bool g_led_control_registers_update_required = false;
+
+// This is the bit pattern in the LED control registers
+// (for matrix A, add one to register for matrix B)
+//
+//  reg -  b7  b6  b5  b4  b3  b2  b1  b0
+// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01
+// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00
+// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00
+// 0x06 -  - , - , - , - , - ,B02,B01,B00
+// 0x08 -  - , - , - , - , - , - , - , -
+// 0x0A - B17,B16,B15, - , - , - , - , -
+// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09
+// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
+// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
+
+
+void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+{
+  g_twi_transfer_buffer[0] = reg;
+  g_twi_transfer_buffer[1] = data;
+
+  //Transmit data until succesful
+  while(twi2c_transmit(addr << 1, g_twi_transfer_buffer,2) != 0);
+}
+
+void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+{
+  // assumes bank is already selected
+
+  // transmit PWM registers in 9 transfers of 16 bytes
+  // g_twi_transfer_buffer[] is 20 bytes
+
+  // iterate over the pwm_buffer contents at 16 byte intervals
+  for ( int i = 0; i < 144; i += 16 )
+  {
+    // set the first register, e.g. 0x24, 0x34, 0x44, etc.
+    g_twi_transfer_buffer[0] = 0x24 + i;
+    // copy the data from i to i+15
+    // device will auto-increment register for data after the first byte
+    // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
+    for ( int j = 0; j < 16; j++ )
+    {
+      g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+    }
+
+    //Transmit buffer until succesful
+    while(twi2c_transmit(addr << 1, g_twi_transfer_buffer,17) != 0);
+  }
+}
+
+void IS31FL3731_init( uint8_t addr )
+{
+  // In order to avoid the LEDs being driven with garbage data
+  // in the LED driver's PWM registers, first enable software shutdown,
+  // then set up the mode and other settings, clear the PWM registers,
+  // then disable software shutdown.
+
+  // select "function register" bank
+  IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+
+  // enable software shutdown
+  IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
+  // this delay was copied from other drivers, might not be needed
+  _delay_ms( 10 );
+
+  // picture mode
+  IS31FL3731_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
+  // display frame 0
+  IS31FL3731_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
+  // audio sync off
+  IS31FL3731_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
+
+  // select bank 0
+  IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+
+  // turn off all LEDs in the LED control register
+  for ( int i = 0x00; i <= 0x11; i++ )
+  {
+    IS31FL3731_write_register( addr, i, 0x00 );
+  }
+
+  // turn off all LEDs in the blink control register (not really needed)
+  for ( int i = 0x12; i <= 0x23; i++ )
+  {
+    IS31FL3731_write_register( addr, i, 0x00 );
+  }
+
+  // set PWM on all LEDs to 0
+  for ( int i = 0x24; i <= 0xB3; i++ )
+  {
+    IS31FL3731_write_register( addr, i, 0x00 );
+  }
+
+  // select "function register" bank
+  IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+
+  // disable software shutdown
+  IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
+
+  // select bank 0 and leave it selected.
+  // most usage after initialization is just writing PWM buffers in bank 0
+  // as there's not much point in double-buffering
+  IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+}
+
+void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+  if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+    is31_led led = g_is31_leds[index];
+
+    // Subtract 0x24 to get the second index of g_pwm_buffer
+    g_pwm_buffer[led.driver][led.r - 0x24] = red;
+    g_pwm_buffer[led.driver][led.g - 0x24] = green;
+    g_pwm_buffer[led.driver][led.b - 0x24] = blue;
+    g_pwm_buffer_update_required = true;
+  }
+}
+
+void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+  for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
+  {
+    IS31FL3731_set_color( i, red, green, blue );
+  }
+}
+
+void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+{
+  is31_led led = g_is31_leds[index];
+
+  uint8_t control_register_r = (led.r - 0x24) / 8;
+  uint8_t control_register_g = (led.g - 0x24) / 8;
+  uint8_t control_register_b = (led.b - 0x24) / 8;
+  uint8_t bit_r = (led.r - 0x24) % 8;
+  uint8_t bit_g = (led.g - 0x24) % 8;
+  uint8_t bit_b = (led.b - 0x24) % 8;
+
+  if ( red ) {
+    g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+  } else {
+    g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+  }
+  if ( green ) {
+    g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+  } else {
+    g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+  }
+  if ( blue ) {
+    g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+  } else {
+    g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+  }
+
+  g_led_control_registers_update_required = true;
+
+
+}
+
+void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+{
+  if ( g_pwm_buffer_update_required )
+  {
+    IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+    IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+  }
+  g_pwm_buffer_update_required = false;
+}
+
+void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+{
+  if ( g_led_control_registers_update_required )
+  {
+    for ( int i=0; i<18; i++ )
+    {
+      IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] );
+      IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] );
+    }
+  }
+}
+

drivers/arm/is31fl3731.h

@@ -0,0 +1,214 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef IS31FL3731_DRIVER_H
+#define IS31FL3731_DRIVER_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t r;
+  uint8_t g;
+  uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3731_init( uint8_t addr );
+void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+
+void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+
+void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+
+#define C1_1  0x24
+#define C1_2  0x25
+#define C1_3  0x26
+#define C1_4  0x27
+#define C1_5  0x28
+#define C1_6  0x29
+#define C1_7  0x2A
+#define C1_8  0x2B
+
+#define C1_9  0x2C
+#define C1_10 0x2D
+#define C1_11 0x2E
+#define C1_12 0x2F
+#define C1_13 0x30
+#define C1_14 0x31
+#define C1_15 0x32
+#define C1_16 0x33
+
+#define C2_1  0x34
+#define C2_2  0x35
+#define C2_3  0x36
+#define C2_4  0x37
+#define C2_5  0x38
+#define C2_6  0x39
+#define C2_7  0x3A
+#define C2_8  0x3B
+
+#define C2_9  0x3C
+#define C2_10 0x3D
+#define C2_11 0x3E
+#define C2_12 0x3F
+#define C2_13 0x40
+#define C2_14 0x41
+#define C2_15 0x42
+#define C2_16 0x43
+
+#define C3_1  0x44
+#define C3_2  0x45
+#define C3_3  0x46
+#define C3_4  0x47
+#define C3_5  0x48
+#define C3_6  0x49
+#define C3_7  0x4A
+#define C3_8  0x4B
+
+#define C3_9  0x4C
+#define C3_10 0x4D
+#define C3_11 0x4E
+#define C3_12 0x4F
+#define C3_13 0x50
+#define C3_14 0x51
+#define C3_15 0x52
+#define C3_16 0x53
+
+#define C4_1  0x54
+#define C4_2  0x55
+#define C4_3  0x56
+#define C4_4  0x57
+#define C4_5  0x58
+#define C4_6  0x59
+#define C4_7  0x5A
+#define C4_8  0x5B
+
+#define C4_9  0x5C
+#define C4_10 0x5D
+#define C4_11 0x5E
+#define C4_12 0x5F
+#define C4_13 0x60
+#define C4_14 0x61
+#define C4_15 0x62
+#define C4_16 0x63
+
+#define C5_1  0x64
+#define C5_2  0x65
+#define C5_3  0x66
+#define C5_4  0x67
+#define C5_5  0x68
+#define C5_6  0x69
+#define C5_7  0x6A
+#define C5_8  0x6B
+
+#define C5_9  0x6C
+#define C5_10 0x6D
+#define C5_11 0x6E
+#define C5_12 0x6F
+#define C5_13 0x70
+#define C5_14 0x71
+#define C5_15 0x72
+#define C5_16 0x73
+
+#define C6_1  0x74
+#define C6_2  0x75
+#define C6_3  0x76
+#define C6_4  0x77
+#define C6_5  0x78
+#define C6_6  0x79
+#define C6_7  0x7A
+#define C6_8  0x7B
+
+#define C6_9  0x7C
+#define C6_10 0x7D
+#define C6_11 0x7E
+#define C6_12 0x7F
+#define C6_13 0x80
+#define C6_14 0x81
+#define C6_15 0x82
+#define C6_16 0x83
+
+#define C7_1  0x84
+#define C7_2  0x85
+#define C7_3  0x86
+#define C7_4  0x87
+#define C7_5  0x88
+#define C7_6  0x89
+#define C7_7  0x8A
+#define C7_8  0x8B
+
+#define C7_9  0x8C
+#define C7_10 0x8D
+#define C7_11 0x8E
+#define C7_12 0x8F
+#define C7_13 0x90
+#define C7_14 0x91
+#define C7_15 0x92
+#define C7_16 0x93
+
+#define C8_1  0x94
+#define C8_2  0x95
+#define C8_3  0x96
+#define C8_4  0x97
+#define C8_5  0x98
+#define C8_6  0x99
+#define C8_7  0x9A
+#define C8_8  0x9B
+
+#define C8_9  0x9C
+#define C8_10 0x9D
+#define C8_11 0x9E
+#define C8_12 0x9F
+#define C8_13 0xA0
+#define C8_14 0xA1
+#define C8_15 0xA2
+#define C8_16 0xA3
+
+#define C9_1  0xA4
+#define C9_2  0xA5
+#define C9_3  0xA6
+#define C9_4  0xA7
+#define C9_5  0xA8
+#define C9_6  0xA9
+#define C9_7  0xAA
+#define C9_8  0xAB
+
+#define C9_9  0xAC
+#define C9_10 0xAD
+#define C9_11 0xAE
+#define C9_12 0xAF
+#define C9_13 0xB0
+#define C9_14 0xB1
+#define C9_15 0xB2
+#define C9_16 0xB3
+
+
+
+#endif // IS31FL3731_DRIVER_H

drivers/arm/twi2c.c

@@ -39,7 +39,9 @@
 
 I2CSlaveMsgCB twi2c_slave_message_process, catchError, clearAfterSend;
 
-static const I2CConfig slaveI2CConfig = {
+static uint8_t twi2c_address;
+
+static const I2CConfig I2CConfig = {
   STM32_TIMINGR_PRESC(15U) |
   STM32_TIMINGR_SCLDEL(4U) | STM32_TIMINGR_SDADEL(2U) |
   STM32_TIMINGR_SCLH(15U)  | STM32_TIMINGR_SCLL(21U),
@@ -166,15 +168,10 @@ void clearAfterSend(I2CDriver *i2cp)
 
 void twi2c_slave_init(void) {
 
-  palSetGroupMode(GPIOB,8,9, PAL_MODE_INPUT);       // Try releasing special pins for a short time
-  chThdSleepMilliseconds(10);
-
-  /* I2C1 SCL on PF1, SDA on PF0 */
-  palSetPadMode(GPIOB, 9, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
-  palSetPadMode(GPIOB, 8, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+  twi2c_init();
 
 
-  i2cStart(&I2C_DRIVER, &slaveI2CConfig);
+  i2cStart(&I2C_DRIVER, &I2CConfig);
 #if HAL_USE_I2C_SLAVE
   I2C_DRIVER.slaveTimeout = MS2ST(100);       // Time for complete message
 #endif
@@ -201,19 +198,31 @@ void twi2c_slave_task(void) {
     }
 }
 
-void twi2c_master_init(void) {
+uint8_t twi2c_start(uint8_t address) {
+  twi2c_address = address;
+  i2cStart(&I2C_DRIVER, &I2CConfig);
+}
 
+void twi2c_init(void) {
   palSetGroupMode(GPIOB,8,9, PAL_MODE_INPUT);       // Try releasing special pins for a short time
   chThdSleepMilliseconds(10);
 
   palSetPadMode(GPIOB, 9, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
   palSetPadMode(GPIOB, 8, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
 
-  i2cStart(&I2C_DRIVER, &slaveI2CConfig);
-
   // try high drive (from kiibohd)
   // I2C_DRIVER.i2c->C2 |= I2Cx_C2_HDRS;
   // try glitch fixing (from kiibohd)
   // I2C_DRIVER.i2c->FLT = 4;
+}
+
+uint8_t twi2c_write(uint8_t data) {
+  uint8_t buffer[1] = {0};
+  return i2cMasterTransmitTimeout(&I2C_DRIVER, twi2c_address/2, &data, 1, buffer, 1, MS2ST(100));
+}
 
+uint8_t twi2c_transmit(uint8_t address, uint8_t* data, uint16_t length) {
+  twi2c_address = address;
+  i2cStart(&I2C_DRIVER, &I2CConfig);
+  return i2cMasterTransmitTimeout(&I2C_DRIVER, twi2c_address/2, data, length, buffer, 1, MS2ST(100));
 }

drivers/arm/twi2c.h

@@ -28,4 +28,13 @@ I2CSlaveMsgCB twi2c_slave_message_process, catchError, clearAfterSend;
 
 void twi2c_slave_init(void);
 
-void twi2c_master_init(void);
+void twi2c_init(void);
+uint8_t twi2c_start(uint8_t address);
+uint8_t twi2c_write(uint8_t data);
+uint8_t twi2c_read_ack(void);
+uint8_t twi2c_read_nack(void);
+uint8_t twi2c_transmit(uint8_t address, uint8_t* data, uint16_t length);
+uint8_t twi2c_receive(uint8_t address, uint8_t* data, uint16_t length);
+uint8_t twi2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length);
+uint8_t twi2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length);
+void twi2c_stop(void);

keyboards/_qmk_handwire/matrix.c

@@ -59,7 +59,7 @@ void matrix_init(void) {
     master = right_hand;
 
     if (master) {
-      twi2c_master_init();
+      twi2c_init();
     } else {
       twi2c_slave_init();
     }

lib/chibios

@@ -1 +1 @@
-Subproject commit f9643c88ad5cd0704d57bed83fe64f45b3e6be4e
+Subproject commit 587968d6cbc2b0e1c7147540872f2a67e59ca18b