clang-format run

drivers/arm/i2c_master.c

@@ -32,89 +32,72 @@
 
 static uint8_t i2c_address;
 
-static const I2CConfig i2cconfig = {
-  STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) |
-  STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) |
-  STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH)  | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL),
-  0,
-  0
-};
+static const I2CConfig i2cconfig = {STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0};
 
 static i2c_status_t chibios_to_qmk(const msg_t* status) {
-  switch (*status) {
-    case I2C_NO_ERROR:
-      return I2C_STATUS_SUCCESS;
-    case I2C_TIMEOUT:
-      return I2C_STATUS_TIMEOUT;
-    // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
-    default:
-      return I2C_STATUS_ERROR;
-  }
+    switch (*status) {
+        case I2C_NO_ERROR:
+            return I2C_STATUS_SUCCESS;
+        case I2C_TIMEOUT:
+            return I2C_STATUS_TIMEOUT;
+        // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
+        default:
+            return I2C_STATUS_ERROR;
+    }
 }
 
-__attribute__ ((weak))
-void i2c_init(void)
-{
-  // Try releasing special pins for a short time
-  palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT);
-  palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT);
+__attribute__((weak)) void i2c_init(void) {
+    // Try releasing special pins for a short time
+    palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT);
+    palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT);
 
-  chThdSleepMilliseconds(10);
+    chThdSleepMilliseconds(10);
 
-  palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
-  palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+    palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+    palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
 
-  //i2cInit(); //This is invoked by halInit() so no need to redo it.
+    // i2cInit(); //This is invoked by halInit() so no need to redo it.
 }
 
-i2c_status_t i2c_start(uint8_t address)
-{
-  i2c_address = address;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-  return I2C_STATUS_SUCCESS;
+i2c_status_t i2c_start(uint8_t address) {
+    i2c_address = address;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+    return I2C_STATUS_SUCCESS;
 }
 
-i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout)
-{
-  i2c_address = address;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
-  return chibios_to_qmk(&status);
+i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
+    i2c_address = address;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
+    return chibios_to_qmk(&status);
 }
 
-i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
-{
-  i2c_address = address;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-  msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout));
-  return chibios_to_qmk(&status);
+i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
+    i2c_address = address;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+    msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout));
+    return chibios_to_qmk(&status);
 }
 
-i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout)
-{
-  i2c_address = devaddr;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
+i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
+    i2c_address = devaddr;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
 
-  uint8_t complete_packet[length + 1];
-  for(uint8_t i = 0; i < length; i++)
-  {
-    complete_packet[i+1] = data[i];
-  }
-  complete_packet[0] = regaddr;
+    uint8_t complete_packet[length + 1];
+    for (uint8_t i = 0; i < length; i++) {
+        complete_packet[i + 1] = data[i];
+    }
+    complete_packet[0] = regaddr;
 
-  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
-  return chibios_to_qmk(&status);
+    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
+    return chibios_to_qmk(&status);
 }
 
-i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
-{
-  i2c_address = devaddr;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout));
-  return chibios_to_qmk(&status);
+i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
+    i2c_address = devaddr;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout));
+    return chibios_to_qmk(&status);
 }
 
-void i2c_stop(void)
-{
-  i2cStop(&I2C_DRIVER);
-}
+void i2c_stop(void) { i2cStop(&I2C_DRIVER); }

drivers/arm/i2c_master.h

@@ -27,66 +27,66 @@
 #include <hal.h>
 
 #ifdef I2C1_BANK
-    #define I2C1_SCL_BANK I2C1_BANK
-    #define I2C1_SDA_BANK I2C1_BANK
+#    define I2C1_SCL_BANK I2C1_BANK
+#    define I2C1_SDA_BANK I2C1_BANK
 #endif
 
 #ifndef I2C1_SCL_BANK
-    #define I2C1_SCL_BANK GPIOB
+#    define I2C1_SCL_BANK GPIOB
 #endif
 
 #ifndef I2C1_SDA_BANK
-    #define I2C1_SDA_BANK GPIOB
+#    define I2C1_SDA_BANK GPIOB
 #endif
 
 #ifndef I2C1_SCL
-    #define I2C1_SCL 6
+#    define I2C1_SCL 6
 #endif
 #ifndef I2C1_SDA
-    #define I2C1_SDA 7
+#    define I2C1_SDA 7
 #endif
 
 // The default PAL alternate modes are used to signal that the pins are used for I2C
 #ifndef I2C1_SCL_PAL_MODE
-    #define I2C1_SCL_PAL_MODE 4
+#    define I2C1_SCL_PAL_MODE 4
 #endif
 #ifndef I2C1_SDA_PAL_MODE
-    #define I2C1_SDA_PAL_MODE 4
+#    define I2C1_SDA_PAL_MODE 4
 #endif
 
 // The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
 // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
 #ifndef I2C1_TIMINGR_PRESC
-    #define I2C1_TIMINGR_PRESC 15U
+#    define I2C1_TIMINGR_PRESC 15U
 #endif
 #ifndef I2C1_TIMINGR_SCLDEL
-    #define I2C1_TIMINGR_SCLDEL 4U
+#    define I2C1_TIMINGR_SCLDEL 4U
 #endif
 #ifndef I2C1_TIMINGR_SDADEL
-    #define I2C1_TIMINGR_SDADEL 2U
+#    define I2C1_TIMINGR_SDADEL 2U
 #endif
 #ifndef I2C1_TIMINGR_SCLH
-    #define I2C1_TIMINGR_SCLH 15U
+#    define I2C1_TIMINGR_SCLH 15U
 #endif
 #ifndef I2C1_TIMINGR_SCLL
-    #define I2C1_TIMINGR_SCLL 21U
+#    define I2C1_TIMINGR_SCLL 21U
 #endif
 
 #ifndef I2C_DRIVER
-  #define I2C_DRIVER I2CD1
+#    define I2C_DRIVER I2CD1
 #endif
 
 typedef int16_t i2c_status_t;
 
 #define I2C_STATUS_SUCCESS (0)
-#define I2C_STATUS_ERROR   (-1)
+#define I2C_STATUS_ERROR (-1)
 #define I2C_STATUS_TIMEOUT (-2)
 
-void i2c_init(void);
+void         i2c_init(void);
 i2c_status_t i2c_start(uint8_t address);
 i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length);
+i2c_status_t i2c_transmit_receive(uint8_t address, uint8_t* tx_body, uint16_t tx_length, uint8_t* rx_body, uint16_t rx_length);
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-void i2c_stop(void);
+void         i2c_stop(void);

drivers/avr/analog.c

@@ -21,49 +21,38 @@
 #include <stdint.h>
 #include "analog.h"
 
+static uint8_t aref = (1 << REFS0);  // default to AREF = Vcc
 
-static uint8_t aref = (1<<REFS0); // default to AREF = Vcc
-
-
-void analogReference(uint8_t mode)
-{
-	aref = mode & 0xC0;
-}
-
+void analogReference(uint8_t mode) { aref = mode & 0xC0; }
 
 // Arduino compatible pin input
-int16_t analogRead(uint8_t pin)
-{
+int16_t analogRead(uint8_t pin) {
 #if defined(__AVR_ATmega32U4__)
-	static const uint8_t PROGMEM pin_to_mux[] = {
-		0x00, 0x01, 0x04, 0x05, 0x06, 0x07,
-		0x25, 0x24, 0x23, 0x22, 0x21, 0x20};
-	if (pin >= 12) return 0;
-	return adc_read(pgm_read_byte(pin_to_mux + pin));
+    static const uint8_t PROGMEM pin_to_mux[] = {0x00, 0x01, 0x04, 0x05, 0x06, 0x07, 0x25, 0x24, 0x23, 0x22, 0x21, 0x20};
+    if (pin >= 12) return 0;
+    return adc_read(pgm_read_byte(pin_to_mux + pin));
 #elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
-	if (pin >= 8) return 0;
-	return adc_read(pin);
+    if (pin >= 8) return 0;
+    return adc_read(pin);
 #else
-	return 0;
+    return 0;
 #endif
 }
 
 // Mux input
-int16_t adc_read(uint8_t mux)
-{
+int16_t adc_read(uint8_t mux) {
 #if defined(__AVR_AT90USB162__)
-	return 0;
+    return 0;
 #else
-	uint8_t low;
-
-	ADCSRA = (1<<ADEN) | ADC_PRESCALER;		// enable ADC
-	ADCSRB = (1<<ADHSM) | (mux & 0x20);		// high speed mode
-	ADMUX = aref | (mux & 0x1F);			// configure mux input
-	ADCSRA = (1<<ADEN) | ADC_PRESCALER | (1<<ADSC);	// start the conversion
-	while (ADCSRA & (1<<ADSC)) ;			// wait for result
-	low = ADCL;					// must read LSB first
-	return (ADCH << 8) | low;			// must read MSB only once!
+    uint8_t low;
+
+    ADCSRA = (1 << ADEN) | ADC_PRESCALER;                // enable ADC
+    ADCSRB = (1 << ADHSM) | (mux & 0x20);                // high speed mode
+    ADMUX  = aref | (mux & 0x1F);                        // configure mux input
+    ADCSRA = (1 << ADEN) | ADC_PRESCALER | (1 << ADSC);  // start the conversion
+    while (ADCSRA & (1 << ADSC))
+        ;                      // wait for result
+    low = ADCL;                // must read LSB first
+    return (ADCH << 8) | low;  // must read MSB only once!
 #endif
 }
-
-

drivers/avr/analog.h

@@ -19,34 +19,34 @@
 
 #include <stdint.h>
 
-void analogReference(uint8_t mode);
+void    analogReference(uint8_t mode);
 int16_t analogRead(uint8_t pin);
 int16_t adc_read(uint8_t mux);
 
-#define ADC_REF_POWER     (1<<REFS0)
-#define ADC_REF_INTERNAL  ((1<<REFS1) | (1<<REFS0))
-#define ADC_REF_EXTERNAL  (0)
+#define ADC_REF_POWER (1 << REFS0)
+#define ADC_REF_INTERNAL ((1 << REFS1) | (1 << REFS0))
+#define ADC_REF_EXTERNAL (0)
 
 // These prescaler values are for high speed mode, ADHSM = 1
 #if F_CPU == 16000000L
-#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS1))
+#    define ADC_PRESCALER ((1 << ADPS2) | (1 << ADPS1))
 #elif F_CPU == 8000000L
-#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS0))
+#    define ADC_PRESCALER ((1 << ADPS2) | (1 << ADPS0))
 #elif F_CPU == 4000000L
-#define ADC_PRESCALER ((1<<ADPS2))
+#    define ADC_PRESCALER ((1 << ADPS2))
 #elif F_CPU == 2000000L
-#define ADC_PRESCALER ((1<<ADPS1) | (1<<ADPS0))
+#    define ADC_PRESCALER ((1 << ADPS1) | (1 << ADPS0))
 #elif F_CPU == 1000000L
-#define ADC_PRESCALER ((1<<ADPS1))
+#    define ADC_PRESCALER ((1 << ADPS1))
 #else
-#define ADC_PRESCALER ((1<<ADPS0))
+#    define ADC_PRESCALER ((1 << ADPS0))
 #endif
 
 // some avr-libc versions do not properly define ADHSM
 #if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
-#if !defined(ADHSM)
-#define ADHSM (7)
-#endif
+#    if !defined(ADHSM)
+#        define ADHSM (7)
+#    endif
 #endif
 
 #endif

drivers/avr/apa102.c

@@ -1,24 +1,24 @@
 /*
-* APA102 lib V1.0a
-*
-* Controls APA102 RGB-LEDs
-* Author: Mikkel (Duckle29 on github)
-*
-* Dec 22th, 2017  v1.0a Initial Version
-*
-* This program is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+ * APA102 lib V1.0a
+ *
+ * Controls APA102 RGB-LEDs
+ * Author: Mikkel (Duckle29 on github)
+ *
+ * Dec 22th, 2017  v1.0a Initial Version
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 
 #include "apa102.h"
 #include <avr/interrupt.h>
@@ -27,75 +27,70 @@
 #include "debug.h"
 
 // Setleds for standard RGB
-void inline apa102_setleds(LED_TYPE *ledarray, uint16_t leds){
-  apa102_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF), _BV(RGB_CLK_PIN & 0xF));
-}
+void inline apa102_setleds(LED_TYPE *ledarray, uint16_t leds) { apa102_setleds_pin(ledarray, leds, _BV(RGB_DI_PIN & 0xF), _BV(RGB_CLK_PIN & 0xF)); }
 
-void static inline apa102_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask_DI, uint8_t pinmask_CLK){
-  pinMode(RGB_DI_PIN, PinDirectionOutput);
-  pinMode(RGB_CLK_PIN, PinDirectionOutput);
+void static inline apa102_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask_DI, uint8_t pinmask_CLK) {
+    pinMode(RGB_DI_PIN, PinDirectionOutput);
+    pinMode(RGB_CLK_PIN, PinDirectionOutput);
 
-  apa102_send_array((uint8_t*)ledarray,leds)
+    apa102_send_array((uint8_t *)ledarray, leds)
 }
 
-void apa102_send_array(uint8_t *data, uint16_t leds){ // Data is struct of 3 bytes. RGB - leds is number of leds in data
-  apa102_start_frame();
-  while(leds--){
-    apa102_send_frame(0xFF000000 | (data->b << 16) | (data->g << 8) | data->r);
-    data++;
-  }
-  apa102_end_frame(leds);
+void apa102_send_array(uint8_t *data, uint16_t leds) {  // Data is struct of 3 bytes. RGB - leds is number of leds in data
+    apa102_start_frame();
+    while (leds--) {
+        apa102_send_frame(0xFF000000 | (data->b << 16) | (data->g << 8) | data->r);
+        data++;
+    }
+    apa102_end_frame(leds);
 }
 
-void apa102_send_frame(uint32_t frame){
-  for(uint32_t i=0xFF; i>0;){
-    apa102_send_byte(frame & i);
-    i = i << 8;
-  }
+void apa102_send_frame(uint32_t frame) {
+    for (uint32_t i = 0xFF; i > 0;) {
+        apa102_send_byte(frame & i);
+        i = i << 8;
+    }
 }
 
-void apa102_start_frame(){
-  apa102_send_frame(0);
-}
+void apa102_start_frame() { apa102_send_frame(0); }
 
-void apa102_end_frame(uint16_t leds)
-{
-  // This function has been taken from: https://github.com/pololu/apa102-arduino/blob/master/APA102.h
-  // and adapted. The code is MIT licensed. I think thats compatible?
+void apa102_end_frame(uint16_t leds) {
+    // This function has been taken from: https://github.com/pololu/apa102-arduino/blob/master/APA102.h
+    // and adapted. The code is MIT licensed. I think thats compatible?
 
-  // We need to send some more bytes to ensure that all the LEDs in the
-  // chain see their new color and start displaying it.
-  //
-  // The data stream seen by the last LED in the chain will be delayed by
-  // (count - 1) clock edges, because each LED before it inverts the clock
-  // line and delays the data by one clock edge.  Therefore, to make sure
-  // the last LED actually receives the data we wrote, the number of extra
-  // edges we send at the end of the frame must be at least (count - 1).
-  // For the APA102C, that is sufficient.
-  //
-  // The SK9822 only updates after it sees 32 zero bits followed by one more
-  // rising edge.  To avoid having the update time depend on the color of
-  // the last LED, we send a dummy 0xFF byte.  (Unfortunately, this means
-  // that partial updates of the beginning of an LED strip are not possible;
-  // the LED after the last one you are trying to update will be black.)
-  // After that, to ensure that the last LED in the chain sees 32 zero bits
-  // and a rising edge, we need to send at least 65 + (count - 1) edges.  It
-  // is sufficent and simpler to just send (5 + count/16) bytes of zeros.
-  //
-  // We are ignoring the specification for the end frame in the APA102/SK9822
-  // datasheets because it does not actually ensure that all the LEDs will
-  // start displaying their new colors right away.
+    // We need to send some more bytes to ensure that all the LEDs in the
+    // chain see their new color and start displaying it.
+    //
+    // The data stream seen by the last LED in the chain will be delayed by
+    // (count - 1) clock edges, because each LED before it inverts the clock
+    // line and delays the data by one clock edge.  Therefore, to make sure
+    // the last LED actually receives the data we wrote, the number of extra
+    // edges we send at the end of the frame must be at least (count - 1).
+    // For the APA102C, that is sufficient.
+    //
+    // The SK9822 only updates after it sees 32 zero bits followed by one more
+    // rising edge.  To avoid having the update time depend on the color of
+    // the last LED, we send a dummy 0xFF byte.  (Unfortunately, this means
+    // that partial updates of the beginning of an LED strip are not possible;
+    // the LED after the last one you are trying to update will be black.)
+    // After that, to ensure that the last LED in the chain sees 32 zero bits
+    // and a rising edge, we need to send at least 65 + (count - 1) edges.  It
+    // is sufficent and simpler to just send (5 + count/16) bytes of zeros.
+    //
+    // We are ignoring the specification for the end frame in the APA102/SK9822
+    // datasheets because it does not actually ensure that all the LEDs will
+    // start displaying their new colors right away.
 
-  apa102_send_byte(0xFF);
-  for (uint16_t i = 0; i < 5 + leds / 16; i++){
-    apa102_send_byte(0);
-  }
+    apa102_send_byte(0xFF);
+    for (uint16_t i = 0; i < 5 + leds / 16; i++) {
+        apa102_send_byte(0);
+    }
 }
 
-void apa102_send_byte(uint8_t byte){
-  uint8_t i;
-  for (i = 0; i < 8; i++){
+void apa102_send_byte(uint8_t byte) {
+    uint8_t i;
+    for (i = 0; i < 8; i++) {
     digitalWrite(RGB_DI_PIN, !!(byte & (1 << (7-i)));
     digitalWrite(RGB_CLK_PIN, PinLevelHigh);
-  }
+    }
 }

drivers/avr/apa102.h

@@ -27,7 +27,6 @@
 
 #include "color.h"
 
-
 /* User Interface
  *
  * Input:
@@ -41,6 +40,6 @@
  *         - Wait 50�s to reset the LEDs
  */
 
-void apa102_setleds     (LED_TYPE *ledarray, uint16_t number_of_leds);
-void apa102_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);
+void apa102_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
+void apa102_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pinmask);
 void apa102_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);

drivers/avr/hd44780.c

@@ -3,7 +3,7 @@
  Author:    Peter Fleury <pfleury@gmx.ch>  http://tinyurl.com/peterfleury
  License:   GNU General Public License Version 3
  File:	    $Id: lcd.c,v 1.15.2.2 2015/01/17 12:16:05 peter Exp $
- Software:  AVR-GCC 3.3 
+ Software:  AVR-GCC 3.3
  Target:    any AVR device, memory mapped mode only for AT90S4414/8515/Mega
 
  DESCRIPTION
@@ -13,15 +13,15 @@
        changed lcd_init(), added additional constants for lcd_command(),
        added 4-bit I/O mode, improved and optimized code.
 
-       Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in 
+       Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in
        4-bit IO port mode (LCD_IO_MODE=1). 8-bit IO port mode not supported.
-       
+
        Memory mapped mode compatible with Kanda STK200, but supports also
        generation of R/W signal through A8 address line.
 
  USAGE
        See the C include lcd.h file for a description of each function
-       
+
 *****************************************************************************/
 #include <inttypes.h>
 #include <avr/io.h>
@@ -29,55 +29,54 @@
 #include <util/delay.h>
 #include "hd44780.h"
 
-/* 
-** constants/macros 
+/*
+** constants/macros
 */
-#define DDR(x) (*(&x - 1))      /* address of data direction register of port x */
+#define DDR(x) (*(&x - 1)) /* address of data direction register of port x */
 #if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
-    /* on ATmega64/128 PINF is on port 0x00 and not 0x60 */
-    #define PIN(x) ( &PORTF==&(x) ? _SFR_IO8(0x00) : (*(&x - 2)) )
+/* on ATmega64/128 PINF is on port 0x00 and not 0x60 */
+#    define PIN(x) (&PORTF == &(x) ? _SFR_IO8(0x00) : (*(&x - 2)))
 #else
-	#define PIN(x) (*(&x - 2))    /* address of input register of port x          */
+#    define PIN(x) (*(&x - 2)) /* address of input register of port x          */
 #endif
 
-
 #if LCD_IO_MODE
-#define lcd_e_delay()   _delay_us(LCD_DELAY_ENABLE_PULSE)
-#define lcd_e_high()    LCD_E_PORT  |=  _BV(LCD_E_PIN);
-#define lcd_e_low()     LCD_E_PORT  &= ~_BV(LCD_E_PIN);
-#define lcd_e_toggle()  toggle_e()
-#define lcd_rw_high()   LCD_RW_PORT |=  _BV(LCD_RW_PIN)
-#define lcd_rw_low()    LCD_RW_PORT &= ~_BV(LCD_RW_PIN)
-#define lcd_rs_high()   LCD_RS_PORT |=  _BV(LCD_RS_PIN)
-#define lcd_rs_low()    LCD_RS_PORT &= ~_BV(LCD_RS_PIN)
+#    define lcd_e_delay() _delay_us(LCD_DELAY_ENABLE_PULSE)
+#    define lcd_e_high() LCD_E_PORT |= _BV(LCD_E_PIN);
+#    define lcd_e_low() LCD_E_PORT &= ~_BV(LCD_E_PIN);
+#    define lcd_e_toggle() toggle_e()
+#    define lcd_rw_high() LCD_RW_PORT |= _BV(LCD_RW_PIN)
+#    define lcd_rw_low() LCD_RW_PORT &= ~_BV(LCD_RW_PIN)
+#    define lcd_rs_high() LCD_RS_PORT |= _BV(LCD_RS_PIN)
+#    define lcd_rs_low() LCD_RS_PORT &= ~_BV(LCD_RS_PIN)
 #endif
 
 #if LCD_IO_MODE
-#if LCD_LINES==1
-#define LCD_FUNCTION_DEFAULT    LCD_FUNCTION_4BIT_1LINE 
+#    if LCD_LINES == 1
+#        define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_1LINE
+#    else
+#        define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_2LINES
+#    endif
 #else
-#define LCD_FUNCTION_DEFAULT    LCD_FUNCTION_4BIT_2LINES 
-#endif
-#else
-#if LCD_LINES==1
-#define LCD_FUNCTION_DEFAULT    LCD_FUNCTION_8BIT_1LINE
-#else
-#define LCD_FUNCTION_DEFAULT    LCD_FUNCTION_8BIT_2LINES
-#endif
+#    if LCD_LINES == 1
+#        define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_1LINE
+#    else
+#        define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_2LINES
+#    endif
 #endif
 
 #if LCD_CONTROLLER_KS0073
-#if LCD_LINES==4
+#    if LCD_LINES == 4
 
-#define KS0073_EXTENDED_FUNCTION_REGISTER_ON  0x2C   /* |0|010|1100 4-bit mode, extension-bit RE = 1 */
-#define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28   /* |0|010|1000 4-bit mode, extension-bit RE = 0 */
-#define KS0073_4LINES_MODE                    0x09   /* |0|000|1001 4 lines mode */
+#        define KS0073_EXTENDED_FUNCTION_REGISTER_ON 0x2C  /* |0|010|1100 4-bit mode, extension-bit RE = 1 */
+#        define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28 /* |0|010|1000 4-bit mode, extension-bit RE = 0 */
+#        define KS0073_4LINES_MODE 0x09                    /* |0|000|1001 4 lines mode */
 
-#endif
+#    endif
 #endif
 
-/* 
-** function prototypes 
+/*
+** function prototypes
 */
 #if LCD_IO_MODE
 static void toggle_e(void);
@@ -87,93 +86,83 @@ static void toggle_e(void);
 ** local functions
 */
 
-
-/************************************************************************* 
+/*************************************************************************
 delay for a minimum of <us> microseconds
 the number of loops is calculated at compile-time from MCU clock frequency
 *************************************************************************/
-#define delay(us)  _delay_us(us) 
-
+#define delay(us) _delay_us(us)
 
 #if LCD_IO_MODE
 /* toggle Enable Pin to initiate write */
-static void toggle_e(void)
-{
+static void toggle_e(void) {
     lcd_e_high();
     lcd_e_delay();
     lcd_e_low();
 }
 #endif
 
-
 /*************************************************************************
 Low-level function to write byte to LCD controller
 Input:    data   byte to write to LCD
-          rs     1: write data    
+          rs     1: write data
                  0: write instruction
 Returns:  none
 *************************************************************************/
 #if LCD_IO_MODE
-static void lcd_write(uint8_t data,uint8_t rs) 
-{
-    unsigned char dataBits ;
-
+static void lcd_write(uint8_t data, uint8_t rs) {
+    unsigned char dataBits;
 
-    if (rs) {        /* write data        (RS=1, RW=0) */
-       lcd_rs_high();
-    } else {         /* write instruction (RS=0, RW=0) */
-       lcd_rs_low();
+    if (rs) { /* write data        (RS=1, RW=0) */
+        lcd_rs_high();
+    } else { /* write instruction (RS=0, RW=0) */
+        lcd_rs_low();
     }
-    lcd_rw_low();    /* RW=0  write mode      */
+    lcd_rw_low(); /* RW=0  write mode      */
 
-    if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT )
-      && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) )
-    {
+    if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
         /* configure data pins as output */
         DDR(LCD_DATA0_PORT) |= 0x0F;
 
         /* output high nibble first */
-        dataBits = LCD_DATA0_PORT & 0xF0;
-        LCD_DATA0_PORT = dataBits |((data>>4)&0x0F);
+        dataBits       = LCD_DATA0_PORT & 0xF0;
+        LCD_DATA0_PORT = dataBits | ((data >> 4) & 0x0F);
         lcd_e_toggle();
 
         /* output low nibble */
-        LCD_DATA0_PORT = dataBits | (data&0x0F);
+        LCD_DATA0_PORT = dataBits | (data & 0x0F);
         lcd_e_toggle();
 
         /* all data pins high (inactive) */
         LCD_DATA0_PORT = dataBits | 0x0F;
-    }
-    else
-    {
+    } else {
         /* configure data pins as output */
         DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN);
         DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN);
         DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN);
         DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN);
-        
+
         /* output high nibble first */
         LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN);
         LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN);
         LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN);
         LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);
-    	if(data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
-    	if(data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
-    	if(data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
-    	if(data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);   
+        if (data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
+        if (data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
+        if (data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
+        if (data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
         lcd_e_toggle();
-        
+
         /* output low nibble */
         LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN);
         LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN);
         LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN);
         LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);
-    	if(data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
-    	if(data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
-    	if(data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
-    	if(data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
-        lcd_e_toggle();        
-        
+        if (data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
+        if (data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
+        if (data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
+        if (data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
+        lcd_e_toggle();
+
         /* all data pins high (inactive) */
         LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
         LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
@@ -182,85 +171,81 @@ static void lcd_write(uint8_t data,uint8_t rs)
     }
 }
 #else
-#define lcd_write(d,rs) if (rs) *(volatile uint8_t*)(LCD_IO_DATA) = d; else *(volatile uint8_t*)(LCD_IO_FUNCTION) = d;
+#    define lcd_write(d, rs)                        \
+        if (rs)                                     \
+            *(volatile uint8_t *)(LCD_IO_DATA) = d; \
+        else                                        \
+            *(volatile uint8_t *)(LCD_IO_FUNCTION) = d;
 /* rs==0 -> write instruction to LCD_IO_FUNCTION */
 /* rs==1 -> write data to LCD_IO_DATA */
 #endif
 
-
 /*************************************************************************
 Low-level function to read byte from LCD controller
-Input:    rs     1: read data    
+Input:    rs     1: read data
                  0: read busy flag / address counter
 Returns:  byte read from LCD controller
 *************************************************************************/
 #if LCD_IO_MODE
-static uint8_t lcd_read(uint8_t rs) 
-{
+static uint8_t lcd_read(uint8_t rs) {
     uint8_t data;
-    
-    
+
     if (rs)
-        lcd_rs_high();                       /* RS=1: read data      */
+        lcd_rs_high(); /* RS=1: read data      */
     else
-        lcd_rs_low();                        /* RS=0: read busy flag */
-    lcd_rw_high();                           /* RW=1  read mode      */
-    
-    if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT )
-      && ( LCD_DATA0_PIN == 0 )&& (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) )
-    {
-        DDR(LCD_DATA0_PORT) &= 0xF0;         /* configure data pins as input */
-        
+        lcd_rs_low(); /* RS=0: read busy flag */
+    lcd_rw_high();    /* RW=1  read mode      */
+
+    if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
+        DDR(LCD_DATA0_PORT) &= 0xF0; /* configure data pins as input */
+
         lcd_e_high();
-        lcd_e_delay();        
-        data = PIN(LCD_DATA0_PORT) << 4;     /* read high nibble first */
+        lcd_e_delay();
+        data = PIN(LCD_DATA0_PORT) << 4; /* read high nibble first */
         lcd_e_low();
-        
-        lcd_e_delay();                       /* Enable 500ns low       */
-        
+
+        lcd_e_delay(); /* Enable 500ns low       */
+
         lcd_e_high();
         lcd_e_delay();
-        data |= PIN(LCD_DATA0_PORT)&0x0F;    /* read low nibble        */
+        data |= PIN(LCD_DATA0_PORT) & 0x0F; /* read low nibble        */
         lcd_e_low();
-    }
-    else
-    {
+    } else {
         /* configure data pins as input */
         DDR(LCD_DATA0_PORT) &= ~_BV(LCD_DATA0_PIN);
         DDR(LCD_DATA1_PORT) &= ~_BV(LCD_DATA1_PIN);
         DDR(LCD_DATA2_PORT) &= ~_BV(LCD_DATA2_PIN);
         DDR(LCD_DATA3_PORT) &= ~_BV(LCD_DATA3_PIN);
-                
+
         /* read high nibble first */
         lcd_e_high();
-        lcd_e_delay();        
+        lcd_e_delay();
         data = 0;
-        if ( PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN) ) data |= 0x10;
-        if ( PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN) ) data |= 0x20;
-        if ( PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN) ) data |= 0x40;
-        if ( PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN) ) data |= 0x80;
+        if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x10;
+        if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x20;
+        if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x40;
+        if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x80;
         lcd_e_low();
 
-        lcd_e_delay();                       /* Enable 500ns low       */
-    
-        /* read low nibble */    
+        lcd_e_delay(); /* Enable 500ns low       */
+
+        /* read low nibble */
         lcd_e_high();
         lcd_e_delay();
-        if ( PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN) ) data |= 0x01;
-        if ( PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN) ) data |= 0x02;
-        if ( PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN) ) data |= 0x04;
-        if ( PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN) ) data |= 0x08;        
+        if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x01;
+        if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x02;
+        if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x04;
+        if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x08;
         lcd_e_low();
     }
     return data;
 }
 #else
-#define lcd_read(rs) (rs) ? *(volatile uint8_t*)(LCD_IO_DATA+LCD_IO_READ) : *(volatile uint8_t*)(LCD_IO_FUNCTION+LCD_IO_READ)
+#    define lcd_read(rs) (rs) ? *(volatile uint8_t *)(LCD_IO_DATA + LCD_IO_READ) : *(volatile uint8_t *)(LCD_IO_FUNCTION + LCD_IO_READ)
 /* rs==0 -> read instruction from LCD_IO_FUNCTION */
 /* rs==1 -> read data from LCD_IO_DATA */
 #endif
 
-
 /*************************************************************************
 loops while lcd is busy, returns address counter
 *************************************************************************/
@@ -268,65 +253,62 @@ static uint8_t lcd_waitbusy(void)
 
 {
     register uint8_t c;
-    
+
     /* wait until busy flag is cleared */
-    while ( (c=lcd_read(0)) & (1<<LCD_BUSY)) {}
-    
+    while ((c = lcd_read(0)) & (1 << LCD_BUSY)) {
+    }
+
     /* the address counter is updated 4us after the busy flag is cleared */
     delay(LCD_DELAY_BUSY_FLAG);
 
     /* now read the address counter */
     return (lcd_read(0));  // return address counter
-    
-}/* lcd_waitbusy */
 
+} /* lcd_waitbusy */
 
 /*************************************************************************
-Move cursor to the start of next line or to the first line if the cursor 
+Move cursor to the start of next line or to the first line if the cursor
 is already on the last line.
 *************************************************************************/
-static inline void lcd_newline(uint8_t pos)
-{
+static inline void lcd_newline(uint8_t pos) {
     register uint8_t addressCounter;
 
-
-#if LCD_LINES==1
+#if LCD_LINES == 1
     addressCounter = 0;
 #endif
-#if LCD_LINES==2
-    if ( pos < (LCD_START_LINE2) )
+#if LCD_LINES == 2
+    if (pos < (LCD_START_LINE2))
         addressCounter = LCD_START_LINE2;
     else
         addressCounter = LCD_START_LINE1;
 #endif
-#if LCD_LINES==4
-#if KS0073_4LINES_MODE
-    if ( pos < LCD_START_LINE2 )
+#if LCD_LINES == 4
+#    if KS0073_4LINES_MODE
+    if (pos < LCD_START_LINE2)
         addressCounter = LCD_START_LINE2;
-    else if ( (pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3) )
+    else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3))
         addressCounter = LCD_START_LINE3;
-    else if ( (pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4) )
+    else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4))
         addressCounter = LCD_START_LINE4;
-    else 
+    else
         addressCounter = LCD_START_LINE1;
-#else
-    if ( pos < LCD_START_LINE3 )
+#    else
+    if (pos < LCD_START_LINE3)
         addressCounter = LCD_START_LINE2;
-    else if ( (pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4) )
+    else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4))
         addressCounter = LCD_START_LINE3;
-    else if ( (pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2) )
+    else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2))
         addressCounter = LCD_START_LINE4;
-    else 
+    else
         addressCounter = LCD_START_LINE1;
+#    endif
 #endif
-#endif
-    lcd_command((1<<LCD_DDRAM)+addressCounter);
-
-}/* lcd_newline */
+    lcd_command((1 << LCD_DDRAM) + addressCounter);
 
+} /* lcd_newline */
 
 /*
-** PUBLIC FUNCTIONS 
+** PUBLIC FUNCTIONS
 */
 
 /*************************************************************************
@@ -334,132 +316,107 @@ Send LCD controller instruction command
 Input:   instruction to send to LCD controller, see HD44780 data sheet
 Returns: none
 *************************************************************************/
-void lcd_command(uint8_t cmd)
-{
+void lcd_command(uint8_t cmd) {
     lcd_waitbusy();
-    lcd_write(cmd,0);
+    lcd_write(cmd, 0);
 }
 
-
 /*************************************************************************
-Send data byte to LCD controller 
+Send data byte to LCD controller
 Input:   data to send to LCD controller, see HD44780 data sheet
 Returns: none
 *************************************************************************/
-void lcd_data(uint8_t data)
-{
+void lcd_data(uint8_t data) {
     lcd_waitbusy();
-    lcd_write(data,1);
+    lcd_write(data, 1);
 }
 
-
-
 /*************************************************************************
 Set cursor to specified position
 Input:    x  horizontal position  (0: left most position)
           y  vertical position    (0: first line)
 Returns:  none
 *************************************************************************/
-void lcd_gotoxy(uint8_t x, uint8_t y)
-{
-#if LCD_LINES==1
-    lcd_command((1<<LCD_DDRAM)+LCD_START_LINE1+x);
+void lcd_gotoxy(uint8_t x, uint8_t y) {
+#if LCD_LINES == 1
+    lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
 #endif
-#if LCD_LINES==2
-    if ( y==0 ) 
-        lcd_command((1<<LCD_DDRAM)+LCD_START_LINE1+x);
+#if LCD_LINES == 2
+    if (y == 0)
+        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
     else
-        lcd_command((1<<LCD_DDRAM)+LCD_START_LINE2+x);
+        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x);
 #endif
-#if LCD_LINES==4
-    if ( y==0 )
-        lcd_command((1<<LCD_DDRAM)+LCD_START_LINE1+x);
-    else if ( y==1)
-        lcd_command((1<<LCD_DDRAM)+LCD_START_LINE2+x);
-    else if ( y==2)
-        lcd_command((1<<LCD_DDRAM)+LCD_START_LINE3+x);
+#if LCD_LINES == 4
+    if (y == 0)
+        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
+    else if (y == 1)
+        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x);
+    else if (y == 2)
+        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE3 + x);
     else /* y==3 */
-        lcd_command((1<<LCD_DDRAM)+LCD_START_LINE4+x);
+        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE4 + x);
 #endif
 
-}/* lcd_gotoxy */
-
+} /* lcd_gotoxy */
 
 /*************************************************************************
 *************************************************************************/
-int lcd_getxy(void)
-{
-    return lcd_waitbusy();
-}
-
+int lcd_getxy(void) { return lcd_waitbusy(); }
 
 /*************************************************************************
 Clear display and set cursor to home position
 *************************************************************************/
-void lcd_clrscr(void)
-{
-    lcd_command(1<<LCD_CLR);
-}
-
+void lcd_clrscr(void) { lcd_command(1 << LCD_CLR); }
 
 /*************************************************************************
 Set cursor to home position
 *************************************************************************/
-void lcd_home(void)
-{
-    lcd_command(1<<LCD_HOME);
-}
-
+void lcd_home(void) { lcd_command(1 << LCD_HOME); }
 
 /*************************************************************************
-Display character at current cursor position 
-Input:    character to be displayed                                       
+Display character at current cursor position
+Input:    character to be displayed
 Returns:  none
 *************************************************************************/
-void lcd_putc(char c)
-{
+void lcd_putc(char c) {
     uint8_t pos;
 
-
-    pos = lcd_waitbusy();   // read busy-flag and address counter
-    if (c=='\n')
-    {
+    pos = lcd_waitbusy();  // read busy-flag and address counter
+    if (c == '\n') {
         lcd_newline(pos);
-    }
-    else
-    {
-#if LCD_WRAP_LINES==1
-#if LCD_LINES==1
-        if ( pos == LCD_START_LINE1+LCD_DISP_LENGTH ) {
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE1,0);
+    } else {
+#if LCD_WRAP_LINES == 1
+#    if LCD_LINES == 1
+        if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
         }
-#elif LCD_LINES==2
-        if ( pos == LCD_START_LINE1+LCD_DISP_LENGTH ) {
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE2,0);    
-        }else if ( pos == LCD_START_LINE2+LCD_DISP_LENGTH ){
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE1,0);
+#    elif LCD_LINES == 2
+        if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0);
+        } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
         }
-#elif LCD_LINES==4
-        if ( pos == LCD_START_LINE1+LCD_DISP_LENGTH ) {
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE2,0);    
-        }else if ( pos == LCD_START_LINE2+LCD_DISP_LENGTH ) {
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE3,0);
-        }else if ( pos == LCD_START_LINE3+LCD_DISP_LENGTH ) {
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE4,0);
-        }else if ( pos == LCD_START_LINE4+LCD_DISP_LENGTH ) {
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE1,0);
+#    elif LCD_LINES == 4
+        if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0);
+        } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE3, 0);
+        } else if (pos == LCD_START_LINE3 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE4, 0);
+        } else if (pos == LCD_START_LINE4 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
         }
-#endif
+#    endif
         lcd_waitbusy();
 #endif
         lcd_write(c, 1);
     }
 
-}/* lcd_putc */
-
+} /* lcd_putc */
 
 /*************************************************************************
-Display string without auto linefeed 
+Display string without auto linefeed
 Input:    string to be displayed
 Returns:  none
 *************************************************************************/
@@ -468,16 +425,15 @@ void lcd_puts(const char *s)
 {
     register char c;
 
-    while ( (c = *s++) ) {
+    while ((c = *s++)) {
         lcd_putc(c);
     }
 
-}/* lcd_puts */
-
+} /* lcd_puts */
 
 /*************************************************************************
-Display string from program memory without auto linefeed 
-Input:     string from program memory be be displayed                                        
+Display string from program memory without auto linefeed
+Input:     string from program memory be be displayed
 Returns:   none
 *************************************************************************/
 void lcd_puts_p(const char *progmem_s)
@@ -485,108 +441,96 @@ void lcd_puts_p(const char *progmem_s)
 {
     register char c;
 
-    while ( (c = pgm_read_byte(progmem_s++)) ) {
+    while ((c = pgm_read_byte(progmem_s++))) {
         lcd_putc(c);
     }
 
-}/* lcd_puts_p */
-
+} /* lcd_puts_p */
 
 /*************************************************************************
-Initialize display and select type of cursor 
+Initialize display and select type of cursor
 Input:    dispAttr LCD_DISP_OFF            display off
                    LCD_DISP_ON             display on, cursor off
                    LCD_DISP_ON_CURSOR      display on, cursor on
                    LCD_DISP_CURSOR_BLINK   display on, cursor on flashing
 Returns:  none
 *************************************************************************/
-void lcd_init(uint8_t dispAttr)
-{
+void lcd_init(uint8_t dispAttr) {
 #if LCD_IO_MODE
     /*
      *  Initialize LCD to 4 bit I/O mode
      */
-     
-    if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT )
-      && ( &LCD_RS_PORT == &LCD_DATA0_PORT) && ( &LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT)
-      && (LCD_DATA0_PIN == 0 ) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) 
-      && (LCD_RS_PIN == 4 ) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6 ) )
-    {
+
+    if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (&LCD_RS_PORT == &LCD_DATA0_PORT) && (&LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) && (LCD_RS_PIN == 4) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6)) {
         /* configure all port bits as output (all LCD lines on same port) */
         DDR(LCD_DATA0_PORT) |= 0x7F;
-    }
-    else if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT )
-           && (LCD_DATA0_PIN == 0 ) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) )
-    {
+    } else if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
         /* configure all port bits as output (all LCD data lines on same port, but control lines on different ports) */
         DDR(LCD_DATA0_PORT) |= 0x0F;
-        DDR(LCD_RS_PORT)    |= _BV(LCD_RS_PIN);
-        DDR(LCD_RW_PORT)    |= _BV(LCD_RW_PIN);
-        DDR(LCD_E_PORT)     |= _BV(LCD_E_PIN);
-    }
-    else
-    {
+        DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN);
+        DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN);
+        DDR(LCD_E_PORT) |= _BV(LCD_E_PIN);
+    } else {
         /* configure all port bits as output (LCD data and control lines on different ports */
-        DDR(LCD_RS_PORT)    |= _BV(LCD_RS_PIN);
-        DDR(LCD_RW_PORT)    |= _BV(LCD_RW_PIN);
-        DDR(LCD_E_PORT)     |= _BV(LCD_E_PIN);
+        DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN);
+        DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN);
+        DDR(LCD_E_PORT) |= _BV(LCD_E_PIN);
         DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN);
         DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN);
         DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN);
         DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN);
     }
-    delay(LCD_DELAY_BOOTUP);             /* wait 16ms or more after power-on       */
-    
+    delay(LCD_DELAY_BOOTUP); /* wait 16ms or more after power-on       */
+
     /* initial write to lcd is 8bit */
-    LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);    // LCD_FUNCTION>>4;
-    LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);    // LCD_FUNCTION_8BIT>>4;
+    LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);  // LCD_FUNCTION>>4;
+    LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);  // LCD_FUNCTION_8BIT>>4;
+    lcd_e_toggle();
+    delay(LCD_DELAY_INIT); /* delay, busy flag can't be checked here */
+
+    /* repeat last command */
     lcd_e_toggle();
-    delay(LCD_DELAY_INIT);               /* delay, busy flag can't be checked here */
-   
-    /* repeat last command */ 
-    lcd_e_toggle();      
-    delay(LCD_DELAY_INIT_REP);           /* delay, busy flag can't be checked here */
-    
+    delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */
+
     /* repeat last command a third time */
-    lcd_e_toggle();      
-    delay(LCD_DELAY_INIT_REP);           /* delay, busy flag can't be checked here */
+    lcd_e_toggle();
+    delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */
 
     /* now configure for 4bit mode */
-    LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);   // LCD_FUNCTION_4BIT_1LINE>>4
+    LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);  // LCD_FUNCTION_4BIT_1LINE>>4
     lcd_e_toggle();
-    delay(LCD_DELAY_INIT_4BIT);          /* some displays need this additional delay */
-    
-    /* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */    
+    delay(LCD_DELAY_INIT_4BIT); /* some displays need this additional delay */
+
+    /* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */
 #else
     /*
      * Initialize LCD to 8 bit memory mapped mode
      */
-    
-    /* enable external SRAM (memory mapped lcd) and one wait state */        
+
+    /* enable external SRAM (memory mapped lcd) and one wait state */
     MCUCR = _BV(SRE) | _BV(SRW);
 
     /* reset LCD */
-    delay(LCD_DELAY_BOOTUP);                    /* wait 16ms after power-on     */
-    lcd_write(LCD_FUNCTION_8BIT_1LINE,0);   /* function set: 8bit interface */                   
-    delay(LCD_DELAY_INIT);                      /* wait 5ms                     */
-    lcd_write(LCD_FUNCTION_8BIT_1LINE,0);   /* function set: 8bit interface */                 
-    delay(LCD_DELAY_INIT_REP);                  /* wait 64us                    */
-    lcd_write(LCD_FUNCTION_8BIT_1LINE,0);   /* function set: 8bit interface */                
-    delay(LCD_DELAY_INIT_REP);                  /* wait 64us                    */
+    delay(LCD_DELAY_BOOTUP);               /* wait 16ms after power-on     */
+    lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */
+    delay(LCD_DELAY_INIT);                 /* wait 5ms                     */
+    lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */
+    delay(LCD_DELAY_INIT_REP);             /* wait 64us                    */
+    lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */
+    delay(LCD_DELAY_INIT_REP);             /* wait 64us                    */
 #endif
 
 #if KS0073_4LINES_MODE
     /* Display with KS0073 controller requires special commands for enabling 4 line mode */
-	lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON);
-	lcd_command(KS0073_4LINES_MODE);
-	lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF);
+    lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON);
+    lcd_command(KS0073_4LINES_MODE);
+    lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF);
 #else
-    lcd_command(LCD_FUNCTION_DEFAULT);      /* function set: display lines  */
+    lcd_command(LCD_FUNCTION_DEFAULT);     /* function set: display lines  */
 #endif
-    lcd_command(LCD_DISP_OFF);              /* display off                  */
-    lcd_clrscr();                           /* display clear                */ 
-    lcd_command(LCD_MODE_DEFAULT);          /* set entry mode               */
-    lcd_command(dispAttr);                  /* display/cursor control       */
-
-}/* lcd_init */
+    lcd_command(LCD_DISP_OFF);     /* display off                  */
+    lcd_clrscr();                  /* display clear                */
+    lcd_command(LCD_MODE_DEFAULT); /* set entry mode               */
+    lcd_command(dispAttr);         /* display/cursor control       */
 
+} /* lcd_init */

drivers/avr/hd44780.h

@@ -6,7 +6,7 @@
  License:   GNU General Public License Version 3
  File:	    $Id: lcd.h,v 1.14.2.4 2015/01/20 17:16:07 peter Exp $
  Software:  AVR-GCC 4.x
- Hardware:  any AVR device, memory mapped mode only for AVR with 
+ Hardware:  any AVR device, memory mapped mode only for AVR with
             memory mapped interface (AT90S8515/ATmega8515/ATmega128)
 ***************************************************************************/
 
@@ -15,333 +15,315 @@
  Collection of libraries for AVR-GCC
  @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury
  @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3
- 
+
  @file
  @defgroup pfleury_lcd LCD library <lcd.h>
  @code #include <lcd.h> @endcode
- 
+
  @brief Basic routines for interfacing a HD44780U-based character LCD display
 
- LCD character displays can be found in many devices, like espresso machines, laser printers. 
- The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays. 
- 
+ LCD character displays can be found in many devices, like espresso machines, laser printers.
+ The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays.
+
  This library allows easy interfacing with a HD44780 compatible display and can be
- operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in 
+ operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in
  4-bit IO port mode (LCD_IO_MODE defined as 1). 8-bit IO port mode is not supported.
 
  Memory mapped mode is compatible with old Kanda STK200 starter kit, but also supports
  generation of R/W signal through A8 address line.
 
  @see The chapter <a href=" http://homepage.hispeed.ch/peterfleury/avr-lcd44780.html" target="_blank">Interfacing a HD44780 Based LCD to an AVR</a>
-      on my home page, which shows example circuits how to connect an LCD to an AVR controller. 
+      on my home page, which shows example circuits how to connect an LCD to an AVR controller.
 
  @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury
- 
+
  @version   2.0
- 
+
  @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3
-  
+
 */
 
 #include <inttypes.h>
 #include <avr/pgmspace.h>
 
 #if (__GNUC__ * 100 + __GNUC_MINOR__) < 405
-#error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !"
+#    error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !"
 #endif
 
-
 /**@{*/
 
 /*
- * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file 
+ * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file
  * by adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile
  * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
  */
 #ifdef _LCD_DEFINITIONS_FILE
-#include "lcd_definitions.h"
+#    include "lcd_definitions.h"
 #endif
 
-
 /**
  * @name  Definition for LCD controller type
  * Use 0 for HD44780 controller, change to 1 for displays with KS0073 controller.
  */
-#ifndef LCD_CONTROLLER_KS0073 
-#define LCD_CONTROLLER_KS0073 0  /**< Use 0 for HD44780 controller, 1 for KS0073 controller */
+#ifndef LCD_CONTROLLER_KS0073
+#    define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */
 #endif
 
-/** 
- * @name  Definitions for Display Size 
+/**
+ * @name  Definitions for Display Size
  * Change these definitions to adapt setting to your display
  *
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by 
+ * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
  * adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile.
  * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
  *
  */
 #ifndef LCD_LINES
-#define LCD_LINES           2     /**< number of visible lines of the display */
+#    define LCD_LINES 2 /**< number of visible lines of the display */
 #endif
 #ifndef LCD_DISP_LENGTH
-#define LCD_DISP_LENGTH    16     /**< visibles characters per line of the display */
+#    define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */
 #endif
 #ifndef LCD_LINE_LENGTH
-#define LCD_LINE_LENGTH  0x40     /**< internal line length of the display    */
+#    define LCD_LINE_LENGTH 0x40 /**< internal line length of the display    */
 #endif
 #ifndef LCD_START_LINE1
-#define LCD_START_LINE1  0x00     /**< DDRAM address of first char of line 1 */
+#    define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */
 #endif
 #ifndef LCD_START_LINE2
-#define LCD_START_LINE2  0x40     /**< DDRAM address of first char of line 2 */
+#    define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */
 #endif
 #ifndef LCD_START_LINE3
-#define LCD_START_LINE3  0x14     /**< DDRAM address of first char of line 3 */
+#    define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */
 #endif
 #ifndef LCD_START_LINE4
-#define LCD_START_LINE4  0x54     /**< DDRAM address of first char of line 4 */
+#    define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */
 #endif
 #ifndef LCD_WRAP_LINES
-#define LCD_WRAP_LINES      0     /**< 0: no wrap, 1: wrap at end of visibile line */
+#    define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */
 #endif
 
-
 /**
  * @name Definitions for 4-bit IO mode
  *
- * The four LCD data lines and the three control lines RS, RW, E can be on the 
- * same port or on different ports. 
+ * The four LCD data lines and the three control lines RS, RW, E can be on the
+ * same port or on different ports.
  * Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on
- * different ports. 
+ * different ports.
  *
  * Normally the four data lines should be mapped to bit 0..3 on one port, but it
  * is possible to connect these data lines in different order or even on different
  * ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions.
  *
- * Adjust these definitions to your target.\n 
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by 
+ * Adjust these definitions to your target.\n
+ * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
  * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile.
  * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
- *  
+ *
  */
-#define LCD_IO_MODE      1            /**< 0: memory mapped mode, 1: IO port mode */
+#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */
 
 #if LCD_IO_MODE
 
-#ifndef LCD_PORT
-#define LCD_PORT         PORTA        /**< port for the LCD lines   */
-#endif
-#ifndef LCD_DATA0_PORT
-#define LCD_DATA0_PORT   LCD_PORT     /**< port for 4bit data bit 0 */
-#endif
-#ifndef LCD_DATA1_PORT
-#define LCD_DATA1_PORT   LCD_PORT     /**< port for 4bit data bit 1 */
-#endif
-#ifndef LCD_DATA2_PORT
-#define LCD_DATA2_PORT   LCD_PORT     /**< port for 4bit data bit 2 */
-#endif
-#ifndef LCD_DATA3_PORT
-#define LCD_DATA3_PORT   LCD_PORT     /**< port for 4bit data bit 3 */
-#endif
-#ifndef LCD_DATA0_PIN
-#define LCD_DATA0_PIN    4            /**< pin for 4bit data bit 0  */
-#endif
-#ifndef LCD_DATA1_PIN
-#define LCD_DATA1_PIN    5            /**< pin for 4bit data bit 1  */
-#endif
-#ifndef LCD_DATA2_PIN
-#define LCD_DATA2_PIN    6            /**< pin for 4bit data bit 2  */
-#endif
-#ifndef LCD_DATA3_PIN
-#define LCD_DATA3_PIN    7            /**< pin for 4bit data bit 3  */
-#endif
-#ifndef LCD_RS_PORT
-#define LCD_RS_PORT      LCD_PORT     /**< port for RS line         */
-#endif
-#ifndef LCD_RS_PIN
-#define LCD_RS_PIN       3            /**< pin  for RS line         */
-#endif
-#ifndef LCD_RW_PORT
-#define LCD_RW_PORT      LCD_PORT     /**< port for RW line         */
-#endif
-#ifndef LCD_RW_PIN
-#define LCD_RW_PIN       2            /**< pin  for RW line         */
-#endif
-#ifndef LCD_E_PORT
-#define LCD_E_PORT       LCD_PORT     /**< port for Enable line     */
-#endif
-#ifndef LCD_E_PIN
-#define LCD_E_PIN        1            /**< pin  for Enable line     */
-#endif
-
-#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || \
-      defined(__AVR_ATmega8515__)|| defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || \
-      defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__)
+#    ifndef LCD_PORT
+#        define LCD_PORT PORTA /**< port for the LCD lines   */
+#    endif
+#    ifndef LCD_DATA0_PORT
+#        define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */
+#    endif
+#    ifndef LCD_DATA1_PORT
+#        define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */
+#    endif
+#    ifndef LCD_DATA2_PORT
+#        define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */
+#    endif
+#    ifndef LCD_DATA3_PORT
+#        define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */
+#    endif
+#    ifndef LCD_DATA0_PIN
+#        define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0  */
+#    endif
+#    ifndef LCD_DATA1_PIN
+#        define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1  */
+#    endif
+#    ifndef LCD_DATA2_PIN
+#        define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2  */
+#    endif
+#    ifndef LCD_DATA3_PIN
+#        define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3  */
+#    endif
+#    ifndef LCD_RS_PORT
+#        define LCD_RS_PORT LCD_PORT /**< port for RS line         */
+#    endif
+#    ifndef LCD_RS_PIN
+#        define LCD_RS_PIN 3 /**< pin  for RS line         */
+#    endif
+#    ifndef LCD_RW_PORT
+#        define LCD_RW_PORT LCD_PORT /**< port for RW line         */
+#    endif
+#    ifndef LCD_RW_PIN
+#        define LCD_RW_PIN 2 /**< pin  for RW line         */
+#    endif
+#    ifndef LCD_E_PORT
+#        define LCD_E_PORT LCD_PORT /**< port for Enable line     */
+#    endif
+#    ifndef LCD_E_PIN
+#        define LCD_E_PIN 1 /**< pin  for Enable line     */
+#    endif
+
+#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__)
 /*
  * memory mapped mode is only supported when the device has an external data memory interface
  */
-#define LCD_IO_DATA      0xC000    /* A15=E=1, A14=RS=1                 */
-#define LCD_IO_FUNCTION  0x8000    /* A15=E=1, A14=RS=0                 */
-#define LCD_IO_READ      0x0100    /* A8 =R/W=1 (R/W: 1=Read, 0=Write   */
+#    define LCD_IO_DATA 0xC000     /* A15=E=1, A14=RS=1                 */
+#    define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0                 */
+#    define LCD_IO_READ 0x0100     /* A8 =R/W=1 (R/W: 1=Read, 0=Write   */
 
 #else
-#error "external data memory interface not available for this device, use 4-bit IO port mode"
+#    error "external data memory interface not available for this device, use 4-bit IO port mode"
 
 #endif
 
-
 /**
  * @name Definitions of delays
  * Used to calculate delay timers.
  * Adapt the F_CPU define in the Makefile to the clock frequency in Hz of your target
  *
- * These delay times can be adjusted, if some displays require different delays.\n 
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by 
+ * These delay times can be adjusted, if some displays require different delays.\n
+ * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
  * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile.
  * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
  */
 #ifndef LCD_DELAY_BOOTUP
-#define LCD_DELAY_BOOTUP   16000      /**< delay in micro seconds after power-on  */
+#    define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on  */
 #endif
 #ifndef LCD_DELAY_INIT
-#define LCD_DELAY_INIT      5000      /**< delay in micro seconds after initialization command sent  */
+#    define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent  */
 #endif
 #ifndef LCD_DELAY_INIT_REP
-#define LCD_DELAY_INIT_REP    64      /**< delay in micro seconds after initialization command repeated */
+#    define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */
 #endif
 #ifndef LCD_DELAY_INIT_4BIT
-#define LCD_DELAY_INIT_4BIT   64      /**< delay in micro seconds after setting 4-bit mode */ 
+#    define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */
 #endif
 #ifndef LCD_DELAY_BUSY_FLAG
-#define LCD_DELAY_BUSY_FLAG    4      /**< time in micro seconds the address counter is updated after busy flag is cleared */
+#    define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */
 #endif
 #ifndef LCD_DELAY_ENABLE_PULSE
-#define LCD_DELAY_ENABLE_PULSE 1      /**< enable signal pulse width in micro seconds */
+#    define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */
 #endif
 
-
 /**
  * @name Definitions for LCD command instructions
- * The constants define the various LCD controller instructions which can be passed to the 
+ * The constants define the various LCD controller instructions which can be passed to the
  * function lcd_command(), see HD44780 data sheet for a complete description.
  */
 
 /* instruction register bit positions, see HD44780U data sheet */
-#define LCD_CLR               0      /* DB0: clear display                  */
-#define LCD_HOME              1      /* DB1: return to home position        */
-#define LCD_ENTRY_MODE        2      /* DB2: set entry mode                 */
-#define LCD_ENTRY_INC         1      /*   DB1: 1=increment, 0=decrement     */
-#define LCD_ENTRY_SHIFT       0      /*   DB2: 1=display shift on           */
-#define LCD_ON                3      /* DB3: turn lcd/cursor on             */
-#define LCD_ON_DISPLAY        2      /*   DB2: turn display on              */
-#define LCD_ON_CURSOR         1      /*   DB1: turn cursor on               */
-#define LCD_ON_BLINK          0      /*     DB0: blinking cursor ?          */
-#define LCD_MOVE              4      /* DB4: move cursor/display            */
-#define LCD_MOVE_DISP         3      /*   DB3: move display (0-> cursor) ?  */
-#define LCD_MOVE_RIGHT        2      /*   DB2: move right (0-> left) ?      */
-#define LCD_FUNCTION          5      /* DB5: function set                   */
-#define LCD_FUNCTION_8BIT     4      /*   DB4: set 8BIT mode (0->4BIT mode) */
-#define LCD_FUNCTION_2LINES   3      /*   DB3: two lines (0->one line)      */
-#define LCD_FUNCTION_10DOTS   2      /*   DB2: 5x10 font (0->5x7 font)      */
-#define LCD_CGRAM             6      /* DB6: set CG RAM address             */
-#define LCD_DDRAM             7      /* DB7: set DD RAM address             */
-#define LCD_BUSY              7      /* DB7: LCD is busy                    */
+#define LCD_CLR 0             /* DB0: clear display                  */
+#define LCD_HOME 1            /* DB1: return to home position        */
+#define LCD_ENTRY_MODE 2      /* DB2: set entry mode                 */
+#define LCD_ENTRY_INC 1       /*   DB1: 1=increment, 0=decrement     */
+#define LCD_ENTRY_SHIFT 0     /*   DB2: 1=display shift on           */
+#define LCD_ON 3              /* DB3: turn lcd/cursor on             */
+#define LCD_ON_DISPLAY 2      /*   DB2: turn display on              */
+#define LCD_ON_CURSOR 1       /*   DB1: turn cursor on               */
+#define LCD_ON_BLINK 0        /*     DB0: blinking cursor ?          */
+#define LCD_MOVE 4            /* DB4: move cursor/display            */
+#define LCD_MOVE_DISP 3       /*   DB3: move display (0-> cursor) ?  */
+#define LCD_MOVE_RIGHT 2      /*   DB2: move right (0-> left) ?      */
+#define LCD_FUNCTION 5        /* DB5: function set                   */
+#define LCD_FUNCTION_8BIT 4   /*   DB4: set 8BIT mode (0->4BIT mode) */
+#define LCD_FUNCTION_2LINES 3 /*   DB3: two lines (0->one line)      */
+#define LCD_FUNCTION_10DOTS 2 /*   DB2: 5x10 font (0->5x7 font)      */
+#define LCD_CGRAM 6           /* DB6: set CG RAM address             */
+#define LCD_DDRAM 7           /* DB7: set DD RAM address             */
+#define LCD_BUSY 7            /* DB7: LCD is busy                    */
 
 /* set entry mode: display shift on/off, dec/inc cursor move direction */
-#define LCD_ENTRY_DEC            0x04   /* display shift off, dec cursor move dir */
-#define LCD_ENTRY_DEC_SHIFT      0x05   /* display shift on,  dec cursor move dir */
-#define LCD_ENTRY_INC_           0x06   /* display shift off, inc cursor move dir */
-#define LCD_ENTRY_INC_SHIFT      0x07   /* display shift on,  inc cursor move dir */
+#define LCD_ENTRY_DEC 0x04       /* display shift off, dec cursor move dir */
+#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on,  dec cursor move dir */
+#define LCD_ENTRY_INC_ 0x06      /* display shift off, inc cursor move dir */
+#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on,  inc cursor move dir */
 
 /* display on/off, cursor on/off, blinking char at cursor position */
-#define LCD_DISP_OFF             0x08   /* display off                            */
-#define LCD_DISP_ON              0x0C   /* display on, cursor off                 */
-#define LCD_DISP_ON_BLINK        0x0D   /* display on, cursor off, blink char     */
-#define LCD_DISP_ON_CURSOR       0x0E   /* display on, cursor on                  */
-#define LCD_DISP_ON_CURSOR_BLINK 0x0F   /* display on, cursor on, blink char      */
+#define LCD_DISP_OFF 0x08             /* display off                            */
+#define LCD_DISP_ON 0x0C              /* display on, cursor off                 */
+#define LCD_DISP_ON_BLINK 0x0D        /* display on, cursor off, blink char     */
+#define LCD_DISP_ON_CURSOR 0x0E       /* display on, cursor on                  */
+#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char      */
 
 /* move cursor/shift display */
-#define LCD_MOVE_CURSOR_LEFT     0x10   /* move cursor left  (decrement)          */
-#define LCD_MOVE_CURSOR_RIGHT    0x14   /* move cursor right (increment)          */
-#define LCD_MOVE_DISP_LEFT       0x18   /* shift display left                     */
-#define LCD_MOVE_DISP_RIGHT      0x1C   /* shift display right                    */
+#define LCD_MOVE_CURSOR_LEFT 0x10  /* move cursor left  (decrement)          */
+#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment)          */
+#define LCD_MOVE_DISP_LEFT 0x18    /* shift display left                     */
+#define LCD_MOVE_DISP_RIGHT 0x1C   /* shift display right                    */
 
 /* function set: set interface data length and number of display lines */
-#define LCD_FUNCTION_4BIT_1LINE  0x20   /* 4-bit interface, single line, 5x7 dots */
-#define LCD_FUNCTION_4BIT_2LINES 0x28   /* 4-bit interface, dual line,   5x7 dots */
-#define LCD_FUNCTION_8BIT_1LINE  0x30   /* 8-bit interface, single line, 5x7 dots */
-#define LCD_FUNCTION_8BIT_2LINES 0x38   /* 8-bit interface, dual line,   5x7 dots */
+#define LCD_FUNCTION_4BIT_1LINE 0x20  /* 4-bit interface, single line, 5x7 dots */
+#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line,   5x7 dots */
+#define LCD_FUNCTION_8BIT_1LINE 0x30  /* 8-bit interface, single line, 5x7 dots */
+#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line,   5x7 dots */
 
+#define LCD_MODE_DEFAULT ((1 << LCD_ENTRY_MODE) | (1 << LCD_ENTRY_INC))
 
-#define LCD_MODE_DEFAULT     ((1<<LCD_ENTRY_MODE) | (1<<LCD_ENTRY_INC) )
-
-
-
-/** 
+/**
  *  @name Functions
  */
 
-
 /**
  @brief    Initialize display and select type of cursor
  @param    dispAttr \b LCD_DISP_OFF display off\n
                     \b LCD_DISP_ON display on, cursor off\n
                     \b LCD_DISP_ON_CURSOR display on, cursor on\n
-                    \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing             
+                    \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing
  @return  none
 */
 extern void lcd_init(uint8_t dispAttr);
 
-
 /**
  @brief    Clear display and set cursor to home position
  @return   none
 */
 extern void lcd_clrscr(void);
 
-
 /**
  @brief    Set cursor to home position
  @return   none
 */
 extern void lcd_home(void);
 
-
 /**
  @brief    Set cursor to specified position
- 
+
  @param    x horizontal position\n (0: left most position)
  @param    y vertical position\n   (0: first line)
  @return   none
 */
 extern void lcd_gotoxy(uint8_t x, uint8_t y);
 
-
 /**
  @brief    Display character at current cursor position
- @param    c character to be displayed                                       
+ @param    c character to be displayed
  @return   none
 */
 extern void lcd_putc(char c);
 
-
 /**
  @brief    Display string without auto linefeed
- @param    s string to be displayed                                        
+ @param    s string to be displayed
  @return   none
 */
 extern void lcd_puts(const char *s);
 
-
 /**
  @brief    Display string from program memory without auto linefeed
- @param    progmem_s string from program memory be be displayed                                        
+ @param    progmem_s string from program memory be be displayed
  @return   none
  @see      lcd_puts_P
 */
 extern void lcd_puts_p(const char *progmem_s);
 
-
 /**
  @brief    Send LCD controller instruction command
  @param    cmd instruction to send to LCD controller, see HD44780 data sheet
@@ -349,23 +331,20 @@ extern void lcd_puts_p(const char *progmem_s);
 */
 extern void lcd_command(uint8_t cmd);
 
-
 /**
- @brief    Send data byte to LCD controller 
- 
+ @brief    Send data byte to LCD controller
+
  Similar to lcd_putc(), but without interpreting LF
  @param    data byte to send to LCD controller, see HD44780 data sheet
  @return   none
 */
 extern void lcd_data(uint8_t data);
 
-
 /**
  @brief macros for automatically storing string constant in program memory
 */
-#define lcd_puts_P(__s)         lcd_puts_p(PSTR(__s))
+#define lcd_puts_P(__s) lcd_puts_p(PSTR(__s))
 
 /**@}*/
 
-#endif //LCD_H
-
+#endif  // LCD_H

drivers/avr/i2c_master.c

@@ -10,200 +10,200 @@
 #include "wait.h"
 
 #ifndef F_SCL
-#  define F_SCL 400000UL  // SCL frequency
+#    define F_SCL 400000UL  // SCL frequency
 #endif
 #define Prescaler 1
 #define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16) / 2)
 
 void i2c_init(void) {
-  TWSR = 0; /* no prescaler */
-  TWBR = (uint8_t)TWBR_val;
+    TWSR = 0; /* no prescaler */
+    TWBR = (uint8_t)TWBR_val;
 
-  #ifdef __AVR_ATmega32A__
-  // set pull-up resistors on I2C bus pins
-  PORTC |= 0b11;
+#ifdef __AVR_ATmega32A__
+    // set pull-up resistors on I2C bus pins
+    PORTC |= 0b11;
 
-  // enable TWI (two-wire interface)
-  TWCR |= (1 << TWEN);
+    // enable TWI (two-wire interface)
+    TWCR |= (1 << TWEN);
 
-  // enable TWI interrupt and slave address ACK
-  TWCR |= (1 << TWIE);
-  TWCR |= (1 << TWEA);
-  #endif
+    // enable TWI interrupt and slave address ACK
+    TWCR |= (1 << TWIE);
+    TWCR |= (1 << TWEA);
+#endif
 }
 
 i2c_status_t i2c_start(uint8_t address, uint16_t timeout) {
-  // reset TWI control register
-  TWCR = 0;
-  // transmit START condition
-  TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
-
-  uint16_t timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
-    if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
-      return I2C_STATUS_TIMEOUT;
-    }
-  }
-
-  // check if the start condition was successfully transmitted
-  if (((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)) {
-    return I2C_STATUS_ERROR;
-  }
-
-  // load slave address into data register
-  TWDR = address;
-  // start transmission of address
-  TWCR = (1 << TWINT) | (1 << TWEN);
-
-  timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
-    if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
-      return I2C_STATUS_TIMEOUT;
-    }
-  }
-
-  // check if the device has acknowledged the READ / WRITE mode
-  uint8_t twst = TW_STATUS & 0xF8;
-  if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-    return I2C_STATUS_ERROR;
-  }
-
-  return I2C_STATUS_SUCCESS;
+    // reset TWI control register
+    TWCR = 0;
+    // transmit START condition
+    TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
+
+    uint16_t timeout_timer = timer_read();
+    while (!(TWCR & (1 << TWINT))) {
+        if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
+            return I2C_STATUS_TIMEOUT;
+        }
+    }
+
+    // check if the start condition was successfully transmitted
+    if (((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)) {
+        return I2C_STATUS_ERROR;
+    }
+
+    // load slave address into data register
+    TWDR = address;
+    // start transmission of address
+    TWCR = (1 << TWINT) | (1 << TWEN);
+
+    timeout_timer = timer_read();
+    while (!(TWCR & (1 << TWINT))) {
+        if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
+            return I2C_STATUS_TIMEOUT;
+        }
+    }
+
+    // check if the device has acknowledged the READ / WRITE mode
+    uint8_t twst = TW_STATUS & 0xF8;
+    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+        return I2C_STATUS_ERROR;
+    }
+
+    return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_write(uint8_t data, uint16_t timeout) {
-  // load data into data register
-  TWDR = data;
-  // start transmission of data
-  TWCR = (1 << TWINT) | (1 << TWEN);
-
-  uint16_t timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
-    if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
-      return I2C_STATUS_TIMEOUT;
+    // load data into data register
+    TWDR = data;
+    // start transmission of data
+    TWCR = (1 << TWINT) | (1 << TWEN);
+
+    uint16_t timeout_timer = timer_read();
+    while (!(TWCR & (1 << TWINT))) {
+        if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
+            return I2C_STATUS_TIMEOUT;
+        }
     }
-  }
 
-  if ((TW_STATUS & 0xF8) != TW_MT_DATA_ACK) {
-    return I2C_STATUS_ERROR;
-  }
+    if ((TW_STATUS & 0xF8) != TW_MT_DATA_ACK) {
+        return I2C_STATUS_ERROR;
+    }
 
-  return I2C_STATUS_SUCCESS;
+    return I2C_STATUS_SUCCESS;
 }
 
 int16_t i2c_read_ack(uint16_t timeout) {
-  // start TWI module and acknowledge data after reception
-  TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
-
-  uint16_t timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
-    if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
-      return I2C_STATUS_TIMEOUT;
+    // start TWI module and acknowledge data after reception
+    TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
+
+    uint16_t timeout_timer = timer_read();
+    while (!(TWCR & (1 << TWINT))) {
+        if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
+            return I2C_STATUS_TIMEOUT;
+        }
     }
-  }
 
-  // return received data from TWDR
-  return TWDR;
+    // return received data from TWDR
+    return TWDR;
 }
 
 int16_t i2c_read_nack(uint16_t timeout) {
-  // start receiving without acknowledging reception
-  TWCR = (1 << TWINT) | (1 << TWEN);
-
-  uint16_t timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
-    if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
-      return I2C_STATUS_TIMEOUT;
+    // start receiving without acknowledging reception
+    TWCR = (1 << TWINT) | (1 << TWEN);
+
+    uint16_t timeout_timer = timer_read();
+    while (!(TWCR & (1 << TWINT))) {
+        if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
+            return I2C_STATUS_TIMEOUT;
+        }
     }
-  }
 
-  // return received data from TWDR
-  return TWDR;
+    // return received data from TWDR
+    return TWDR;
 }
 
 i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
-  i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
+    i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
 
-  for (uint16_t i = 0; i < length && status >= 0; i++) {
-    status = i2c_write(data[i], timeout);
-  }
+    for (uint16_t i = 0; i < length && status >= 0; i++) {
+        status = i2c_write(data[i], timeout);
+    }
 
-  i2c_stop();
+    i2c_stop();
 
-  return status;
+    return status;
 }
 
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
-  i2c_status_t status = i2c_start(address | I2C_READ, timeout);
+    i2c_status_t status = i2c_start(address | I2C_READ, timeout);
 
-  for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
-    status = i2c_read_ack(timeout);
-    if (status >= 0) {
-      data[i] = status;
+    for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
+        status = i2c_read_ack(timeout);
+        if (status >= 0) {
+            data[i] = status;
+        }
     }
-  }
 
-  if (status >= 0) {
-    status = i2c_read_nack(timeout);
     if (status >= 0) {
-      data[(length - 1)] = status;
+        status = i2c_read_nack(timeout);
+        if (status >= 0) {
+            data[(length - 1)] = status;
+        }
     }
-  }
 
-  i2c_stop();
+    i2c_stop();
 
-  return (status < 0) ? status : I2C_STATUS_SUCCESS;
+    return (status < 0) ? status : I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
-  i2c_status_t status = i2c_start(devaddr | 0x00, timeout);
-  if (status >= 0) {
-    status = i2c_write(regaddr, timeout);
+    i2c_status_t status = i2c_start(devaddr | 0x00, timeout);
+    if (status >= 0) {
+        status = i2c_write(regaddr, timeout);
 
-    for (uint16_t i = 0; i < length && status >= 0; i++) {
-      status = i2c_write(data[i], timeout);
+        for (uint16_t i = 0; i < length && status >= 0; i++) {
+            status = i2c_write(data[i], timeout);
+        }
     }
-  }
 
-  i2c_stop();
+    i2c_stop();
 
-  return status;
+    return status;
 }
 
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
-  i2c_status_t status = i2c_start(devaddr, timeout);
-  if (status < 0) {
-    goto error;
-  }
+    i2c_status_t status = i2c_start(devaddr, timeout);
+    if (status < 0) {
+        goto error;
+    }
 
-  status = i2c_write(regaddr, timeout);
-  if (status < 0) {
-    goto error;
-  }
+    status = i2c_write(regaddr, timeout);
+    if (status < 0) {
+        goto error;
+    }
 
-  status = i2c_start(devaddr | 0x01, timeout);
+    status = i2c_start(devaddr | 0x01, timeout);
 
-  for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
-    status = i2c_read_ack(timeout);
-    if (status >= 0) {
-      data[i] = status;
+    for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
+        status = i2c_read_ack(timeout);
+        if (status >= 0) {
+            data[i] = status;
+        }
     }
-  }
 
-  if (status >= 0) {
-    status = i2c_read_nack(timeout);
     if (status >= 0) {
-      data[(length - 1)] = status;
+        status = i2c_read_nack(timeout);
+        if (status >= 0) {
+            data[(length - 1)] = status;
+        }
     }
-  }
 
 error:
-  i2c_stop();
+    i2c_stop();
 
-  return (status < 0) ? status : I2C_STATUS_SUCCESS;
+    return (status < 0) ? status : I2C_STATUS_SUCCESS;
 }
 
 void i2c_stop(void) {
-  // transmit STOP condition
-  TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO);
+    // transmit STOP condition
+    TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO);
 }

drivers/avr/i2c_master.h

@@ -11,21 +11,21 @@
 typedef int16_t i2c_status_t;
 
 #define I2C_STATUS_SUCCESS (0)
-#define I2C_STATUS_ERROR   (-1)
+#define I2C_STATUS_ERROR (-1)
 #define I2C_STATUS_TIMEOUT (-2)
 
 #define I2C_TIMEOUT_IMMEDIATE (0)
 #define I2C_TIMEOUT_INFINITE (0xFFFF)
 
-void i2c_init(void);
+void         i2c_init(void);
 i2c_status_t i2c_start(uint8_t address, uint16_t timeout);
 i2c_status_t i2c_write(uint8_t data, uint16_t timeout);
-int16_t i2c_read_ack(uint16_t timeout);
-int16_t i2c_read_nack(uint16_t timeout);
+int16_t      i2c_read_ack(uint16_t timeout);
+int16_t      i2c_read_nack(uint16_t timeout);
 i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-void i2c_stop(void);
+void         i2c_stop(void);
 
-#endif // I2C_MASTER_H
+#endif  // I2C_MASTER_H

drivers/avr/i2c_slave.c

@@ -12,24 +12,24 @@
 volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT];
 
 static volatile uint8_t buffer_address;
-static volatile bool slave_has_register_set = false;
+static volatile bool    slave_has_register_set = false;
 
-void i2c_slave_init(uint8_t address){
+void i2c_slave_init(uint8_t address) {
     // load address into TWI address register
     TWAR = address;
     // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
     TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN);
 }
 
-void i2c_slave_stop(void){
+void i2c_slave_stop(void) {
     // clear acknowledge and enable bits
     TWCR &= ~((1 << TWEA) | (1 << TWEN));
 }
 
-ISR(TWI_vect){
+ISR(TWI_vect) {
     uint8_t ack = 1;
 
-    switch(TW_STATUS){
+    switch (TW_STATUS) {
         case TW_SR_SLA_ACK:
             // The device is now a slave receiver
             slave_has_register_set = false;
@@ -38,14 +38,14 @@ ISR(TWI_vect){
         case TW_SR_DATA_ACK:
             // This device is a slave receiver and has received data
             // First byte is the location then the bytes will be writen in buffer with auto-incriment
-            if(!slave_has_register_set){
+            if (!slave_has_register_set) {
                 buffer_address = TWDR;
 
                 if (buffer_address >= I2C_SLAVE_REG_COUNT) {  // address out of bounds dont ack
-                  ack            = 0;
-                  buffer_address = 0;
+                    ack            = 0;
+                    buffer_address = 0;
                 }
-                slave_has_register_set = true; // address has been receaved now fill in buffer
+                slave_has_register_set = true;  // address has been receaved now fill in buffer
             } else {
                 i2c_slave_reg[buffer_address] = TWDR;
                 buffer_address++;

drivers/avr/i2c_slave.h

@@ -15,4 +15,4 @@ extern volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT];
 void i2c_slave_init(uint8_t address);
 void i2c_slave_stop(void);
 
-#endif // I2C_SLAVE_H
+#endif  // I2C_SLAVE_H

drivers/avr/pro_micro.h

@@ -90,14 +90,14 @@
 #undef OCR2_6
 #undef OCR2_7
 
-#define NUM_DIGITAL_PINS  30
+#define NUM_DIGITAL_PINS 30
 #define NUM_ANALOG_INPUTS 12
 
-#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0          PORTD |= (1<<5)
-#define TXLED1          PORTD &= ~(1<<5)
-#define RXLED0          PORTB |= (1<<0)
-#define RXLED1          PORTB &= ~(1<<0)
+#define TX_RX_LED_INIT DDRD |= (1 << 5), DDRB |= (1 << 0)
+#define TXLED0 PORTD |= (1 << 5)
+#define TXLED1 PORTD &= ~(1 << 5)
+#define RXLED0 PORTB |= (1 << 0)
+#define RXLED1 PORTB &= ~(1 << 0)
 
 static const uint8_t SDA = 2;
 static const uint8_t SCL = 3;
@@ -111,27 +111,27 @@ static const uint8_t SCK  = 15;
 
 // Mapping of analog pins as digital I/O
 // A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24;   // D4
-static const uint8_t ADC7 = 25;   // D6
-static const uint8_t ADC8 = 26;   // D8
-static const uint8_t ADC9 = 27;   // D9
+static const uint8_t ADC0  = 18;
+static const uint8_t ADC1  = 19;
+static const uint8_t ADC2  = 20;
+static const uint8_t ADC3  = 21;
+static const uint8_t ADC4  = 22;
+static const uint8_t ADC5  = 23;
+static const uint8_t ADC6  = 24;  // D4
+static const uint8_t ADC7  = 25;  // D6
+static const uint8_t ADC8  = 26;  // D8
+static const uint8_t ADC9  = 27;  // D9
 static const uint8_t ADC10 = 28;  // D10
 static const uint8_t ADC11 = 29;  // D12
 
-#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
+#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
 #define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
+#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
+#define digitalPinToPCMSKbit(p) (((p) >= 8 && (p) <= 11) ? (p)-4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
 
 //  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
 extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
+#define analogPinToChannel(P) (pgm_read_byte(analog_pin_to_channel_PGM + (P)))
 
 #define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
 
@@ -182,159 +182,121 @@ extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
 // appropriate addresses for various functions (e.g. reading
 // and writing)
 const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &DDRB,
-    (uint16_t) &DDRC,
-    (uint16_t) &DDRD,
-    (uint16_t) &DDRE,
-    (uint16_t) &DDRF,
+    NOT_A_PORT, NOT_A_PORT, (uint16_t)&DDRB, (uint16_t)&DDRC, (uint16_t)&DDRD, (uint16_t)&DDRE, (uint16_t)&DDRF,
 };
 
 const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PORTB,
-    (uint16_t) &PORTC,
-    (uint16_t) &PORTD,
-    (uint16_t) &PORTE,
-    (uint16_t) &PORTF,
+    NOT_A_PORT, NOT_A_PORT, (uint16_t)&PORTB, (uint16_t)&PORTC, (uint16_t)&PORTD, (uint16_t)&PORTE, (uint16_t)&PORTF,
 };
 
 const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PINB,
-    (uint16_t) &PINC,
-    (uint16_t) &PIND,
-    (uint16_t) &PINE,
-    (uint16_t) &PINF,
+    NOT_A_PORT, NOT_A_PORT, (uint16_t)&PINB, (uint16_t)&PINC, (uint16_t)&PIND, (uint16_t)&PINE, (uint16_t)&PINF,
 };
 
 const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD, // D0 - PD2
-    PD, // D1 - PD3
-    PD, // D2 - PD1
-    PD, // D3 - PD0
-    PD, // D4 - PD4
-    PC, // D5 - PC6
-    PD, // D6 - PD7
-    PE, // D7 - PE6
-
-    PB, // D8 - PB4
-    PB, // D9 - PB5
-    PB, // D10 - PB6
-    PB, // D11 - PB7
-    PD, // D12 - PD6
-    PC, // D13 - PC7
-
-    PB, // D14 - MISO - PB3
-    PB, // D15 - SCK - PB1
-    PB, // D16 - MOSI - PB2
-    PB, // D17 - SS - PB0
-
-    PF, // D18 - A0 - PF7
-    PF, // D19 - A1 - PF6
-    PF, // D20 - A2 - PF5
-    PF, // D21 - A3 - PF4
-    PF, // D22 - A4 - PF1
-    PF, // D23 - A5 - PF0
-
-    PD, // D24 - PD5
-    PD, // D25 / D6 - A7 - PD7
-    PB, // D26 / D8 - A8 - PB4
-    PB, // D27 / D9 - A9 - PB5
-    PB, // D28 / D10 - A10 - PB6
-    PD, // D29 / D12 - A11 - PD6
+    PD,  // D0 - PD2
+    PD,  // D1 - PD3
+    PD,  // D2 - PD1
+    PD,  // D3 - PD0
+    PD,  // D4 - PD4
+    PC,  // D5 - PC6
+    PD,  // D6 - PD7
+    PE,  // D7 - PE6
+
+    PB,  // D8 - PB4
+    PB,  // D9 - PB5
+    PB,  // D10 - PB6
+    PB,  // D11 - PB7
+    PD,  // D12 - PD6
+    PC,  // D13 - PC7
+
+    PB,  // D14 - MISO - PB3
+    PB,  // D15 - SCK - PB1
+    PB,  // D16 - MOSI - PB2
+    PB,  // D17 - SS - PB0
+
+    PF,  // D18 - A0 - PF7
+    PF,  // D19 - A1 - PF6
+    PF,  // D20 - A2 - PF5
+    PF,  // D21 - A3 - PF4
+    PF,  // D22 - A4 - PF1
+    PF,  // D23 - A5 - PF0
+
+    PD,  // D24 - PD5
+    PD,  // D25 / D6 - A7 - PD7
+    PB,  // D26 / D8 - A8 - PB4
+    PB,  // D27 / D9 - A9 - PB5
+    PB,  // D28 / D10 - A10 - PB6
+    PD,  // D29 / D12 - A11 - PD6
 };
 
 const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2), // D0 - PD2
-    _BV(3), // D1 - PD3
-    _BV(1), // D2 - PD1
-    _BV(0), // D3 - PD0
-    _BV(4), // D4 - PD4
-    _BV(6), // D5 - PC6
-    _BV(7), // D6 - PD7
-    _BV(6), // D7 - PE6
-
-    _BV(4), // D8 - PB4
-    _BV(5), // D9 - PB5
-    _BV(6), // D10 - PB6
-    _BV(7), // D11 - PB7
-    _BV(6), // D12 - PD6
-    _BV(7), // D13 - PC7
-
-    _BV(3), // D14 - MISO - PB3
-    _BV(1), // D15 - SCK - PB1
-    _BV(2), // D16 - MOSI - PB2
-    _BV(0), // D17 - SS - PB0
-
-    _BV(7), // D18 - A0 - PF7
-    _BV(6), // D19 - A1 - PF6
-    _BV(5), // D20 - A2 - PF5
-    _BV(4), // D21 - A3 - PF4
-    _BV(1), // D22 - A4 - PF1
-    _BV(0), // D23 - A5 - PF0
-
-    _BV(5), // D24 - PD5
-    _BV(7), // D25 / D6 - A7 - PD7
-    _BV(4), // D26 / D8 - A8 - PB4
-    _BV(5), // D27 / D9 - A9 - PB5
-    _BV(6), // D28 / D10 - A10 - PB6
-    _BV(6), // D29 / D12 - A11 - PD6
+    _BV(2),  // D0 - PD2
+    _BV(3),  // D1 - PD3
+    _BV(1),  // D2 - PD1
+    _BV(0),  // D3 - PD0
+    _BV(4),  // D4 - PD4
+    _BV(6),  // D5 - PC6
+    _BV(7),  // D6 - PD7
+    _BV(6),  // D7 - PE6
+
+    _BV(4),  // D8 - PB4
+    _BV(5),  // D9 - PB5
+    _BV(6),  // D10 - PB6
+    _BV(7),  // D11 - PB7
+    _BV(6),  // D12 - PD6
+    _BV(7),  // D13 - PC7
+
+    _BV(3),  // D14 - MISO - PB3
+    _BV(1),  // D15 - SCK - PB1
+    _BV(2),  // D16 - MOSI - PB2
+    _BV(0),  // D17 - SS - PB0
+
+    _BV(7),  // D18 - A0 - PF7
+    _BV(6),  // D19 - A1 - PF6
+    _BV(5),  // D20 - A2 - PF5
+    _BV(4),  // D21 - A3 - PF4
+    _BV(1),  // D22 - A4 - PF1
+    _BV(0),  // D23 - A5 - PF0
+
+    _BV(5),  // D24 - PD5
+    _BV(7),  // D25 / D6 - A7 - PD7
+    _BV(4),  // D26 / D8 - A8 - PB4
+    _BV(5),  // D27 / D9 - A9 - PB5
+    _BV(6),  // D28 / D10 - A10 - PB6
+    _BV(6),  // D29 / D12 - A11 - PD6
 };
 
 const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    TIMER0B,        /* 3 */
-    NOT_ON_TIMER,
-    TIMER3A,        /* 5 */
-    TIMER4D,        /* 6 */
+    NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, TIMER0B, /* 3 */
+    NOT_ON_TIMER, TIMER3A,                             /* 5 */
+    TIMER4D,                                           /* 6 */
     NOT_ON_TIMER,
 
-    NOT_ON_TIMER,
-    TIMER1A,        /* 9 */
-    TIMER1B,        /* 10 */
-    TIMER0A,        /* 11 */
+    NOT_ON_TIMER, TIMER1A, /* 9 */
+    TIMER1B,               /* 10 */
+    TIMER0A,               /* 11 */
 
-    NOT_ON_TIMER,
-    TIMER4A,        /* 13 */
+    NOT_ON_TIMER, TIMER4A, /* 13 */
 
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
+    NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER,
 
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
+    NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER,
 };
 
 const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6
-    5,  // A2               PF5                 ADC5
-    4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1
-    0,  // A5               PF0                 ADC0
-    8,  // A6       D4      PD4                 ADC8
-    10, // A7       D6      PD7                 ADC10
-    11, // A8       D8      PB4                 ADC11
-    12, // A9       D9      PB5                 ADC12
-    13, // A10      D10     PB6                 ADC13
-    9   // A11      D12     PD6                 ADC9
+    7,   // A0               PF7                 ADC7
+    6,   // A1               PF6                 ADC6
+    5,   // A2               PF5                 ADC5
+    4,   // A3               PF4                 ADC4
+    1,   // A4               PF1                 ADC1
+    0,   // A5               PF0                 ADC0
+    8,   // A6       D4      PD4                 ADC8
+    10,  // A7       D6      PD7                 ADC10
+    11,  // A8       D8      PB4                 ADC11
+    12,  // A9       D9      PB5                 ADC12
+    13,  // A10      D10     PB6                 ADC13
+    9    // A11      D12     PD6                 ADC9
 };
 
 #endif /* ARDUINO_MAIN */
@@ -354,9 +316,9 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
 //
 // SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
 //                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR        Serial
-#define SERIAL_PORT_USBVIRTUAL     Serial
-#define SERIAL_PORT_HARDWARE       Serial1
-#define SERIAL_PORT_HARDWARE_OPEN  Serial1
+#define SERIAL_PORT_MONITOR Serial
+#define SERIAL_PORT_USBVIRTUAL Serial
+#define SERIAL_PORT_HARDWARE Serial1
+#define SERIAL_PORT_HARDWARE_OPEN Serial1
 
 #endif /* Pins_Arduino_h */

drivers/avr/ssd1306.c

@@ -1,325 +1,320 @@
 #ifdef SSD1306OLED
 
-#include "ssd1306.h"
-#include "i2c.h"
-#include <string.h>
-#include "print.h"
-#include "glcdfont.c"
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "timer.h"
+#    include "ssd1306.h"
+#    include "i2c.h"
+#    include <string.h>
+#    include "print.h"
+#    include "glcdfont.c"
+#    ifdef ADAFRUIT_BLE_ENABLE
+#        include "adafruit_ble.h"
+#    endif
+#    ifdef PROTOCOL_LUFA
+#        include "lufa.h"
+#    endif
+#    include "sendchar.h"
+#    include "timer.h"
 
 // Set this to 1 to help diagnose early startup problems
 // when testing power-on with ble.  Turn it off otherwise,
 // as the latency of printing most of the debug info messes
 // with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
+#    define DEBUG_TO_SCREEN 0
 
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
+// static uint16_t last_battery_update;
+// static uint32_t vbat;
 //#define BatteryUpdateInterval 10000 /* milliseconds */
-#define ScreenOffInterval 300000 /* milliseconds */
-#if DEBUG_TO_SCREEN
+#    define ScreenOffInterval 300000 /* milliseconds */
+#    if DEBUG_TO_SCREEN
 static uint8_t displaying;
-#endif
+#    endif
 static uint16_t last_flush;
 
 // Write command sequence.
 // Returns true on success.
 static inline bool _send_cmd1(uint8_t cmd) {
-  bool res = false;
+    bool res = false;
 
-  if (i2c_start_write(SSD1306_ADDRESS)) {
-    xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
-    goto done;
-  }
+    if (i2c_start_write(SSD1306_ADDRESS)) {
+        xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
+        goto done;
+    }
 
-  if (i2c_master_write(0x0 /* command byte follows */)) {
-    print("failed to write control byte\n");
+    if (i2c_master_write(0x0 /* command byte follows */)) {
+        print("failed to write control byte\n");
 
-    goto done;
-  }
+        goto done;
+    }
 
-  if (i2c_master_write(cmd)) {
-    xprintf("failed to write command %d\n", cmd);
-    goto done;
-  }
-  res = true;
+    if (i2c_master_write(cmd)) {
+        xprintf("failed to write command %d\n", cmd);
+        goto done;
+    }
+    res = true;
 done:
-  i2c_master_stop();
-  return res;
+    i2c_master_stop();
+    return res;
 }
 
 // Write 2-byte command sequence.
 // Returns true on success
 static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  return _send_cmd1(opr);
+    if (!_send_cmd1(cmd)) {
+        return false;
+    }
+    return _send_cmd1(opr);
 }
 
 // Write 3-byte command sequence.
 // Returns true on success
 static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  if (!_send_cmd1(opr1)) {
-    return false;
-  }
-  return _send_cmd1(opr2);
+    if (!_send_cmd1(cmd)) {
+        return false;
+    }
+    if (!_send_cmd1(opr1)) {
+        return false;
+    }
+    return _send_cmd1(opr2);
 }
 
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
+#    define send_cmd1(c)      \
+        if (!_send_cmd1(c)) { \
+            goto done;        \
+        }
+#    define send_cmd2(c, o)      \
+        if (!_send_cmd2(c, o)) { \
+            goto done;           \
+        }
+#    define send_cmd3(c, o1, o2)      \
+        if (!_send_cmd3(c, o1, o2)) { \
+            goto done;                \
+        }
 
 static void clear_display(void) {
-  matrix_clear(&display);
-
-  // Clear all of the display bits (there can be random noise
-  // in the RAM on startup)
-  send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
-  send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
-  if (i2c_start_write(SSD1306_ADDRESS)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < DisplayWidth; ++col) {
-      i2c_master_write(0);
+    matrix_clear(&display);
+
+    // Clear all of the display bits (there can be random noise
+    // in the RAM on startup)
+    send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
+    send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
+
+    if (i2c_start_write(SSD1306_ADDRESS)) {
+        goto done;
+    }
+    if (i2c_master_write(0x40)) {
+        // Data mode
+        goto done;
+    }
+    for (uint8_t row = 0; row < MatrixRows; ++row) {
+        for (uint8_t col = 0; col < DisplayWidth; ++col) {
+            i2c_master_write(0);
+        }
     }
-  }
 
-  display.dirty = false;
+    display.dirty = false;
 
 done:
-  i2c_master_stop();
+    i2c_master_stop();
 }
 
-#if DEBUG_TO_SCREEN
-#undef sendchar
+#    if DEBUG_TO_SCREEN
+#        undef sendchar
 static int8_t capture_sendchar(uint8_t c) {
-  sendchar(c);
-  iota_gfx_write_char(c);
+    sendchar(c);
+    iota_gfx_write_char(c);
 
-  if (!displaying) {
-    iota_gfx_flush();
-  }
-  return 0;
+    if (!displaying) {
+        iota_gfx_flush();
+    }
+    return 0;
 }
-#endif
+#    endif
 
 bool iota_gfx_init(void) {
-  bool success = false;
+    bool success = false;
 
-  send_cmd1(DisplayOff);
-  send_cmd2(SetDisplayClockDiv, 0x80);
-  send_cmd2(SetMultiPlex, DisplayHeight - 1);
+    send_cmd1(DisplayOff);
+    send_cmd2(SetDisplayClockDiv, 0x80);
+    send_cmd2(SetMultiPlex, DisplayHeight - 1);
 
-  send_cmd2(SetDisplayOffset, 0);
+    send_cmd2(SetDisplayOffset, 0);
 
+    send_cmd1(SetStartLine | 0x0);
+    send_cmd2(SetChargePump, 0x14 /* Enable */);
+    send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
 
-  send_cmd1(SetStartLine | 0x0);
-  send_cmd2(SetChargePump, 0x14 /* Enable */);
-  send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
+#    ifdef OLED_ROTATE180
+    // the following Flip the display orientation 180 degrees
+    send_cmd1(SegRemap);
+    send_cmd1(ComScanInc);
+#    endif
+#    ifndef OLED_ROTATE180
+    // Flips the display orientation 0 degrees
+    send_cmd1(SegRemap | 0x1);
+    send_cmd1(ComScanDec);
+#    endif
 
-#ifdef OLED_ROTATE180
-// the following Flip the display orientation 180 degrees
-  send_cmd1(SegRemap);
-  send_cmd1(ComScanInc);
-#endif
-#ifndef OLED_ROTATE180
-// Flips the display orientation 0 degrees
-  send_cmd1(SegRemap | 0x1);
-  send_cmd1(ComScanDec);
-#endif
-  
-  send_cmd2(SetComPins, 0x2);
-  send_cmd2(SetContrast, 0x8f);
-  send_cmd2(SetPreCharge, 0xf1);
-  send_cmd2(SetVComDetect, 0x40);
-  send_cmd1(DisplayAllOnResume);
-  send_cmd1(NormalDisplay);
-  send_cmd1(DeActivateScroll);
-  send_cmd1(DisplayOn);
+    send_cmd2(SetComPins, 0x2);
+    send_cmd2(SetContrast, 0x8f);
+    send_cmd2(SetPreCharge, 0xf1);
+    send_cmd2(SetVComDetect, 0x40);
+    send_cmd1(DisplayAllOnResume);
+    send_cmd1(NormalDisplay);
+    send_cmd1(DeActivateScroll);
+    send_cmd1(DisplayOn);
 
-  send_cmd2(SetContrast, 0); // Dim
+    send_cmd2(SetContrast, 0);  // Dim
 
-  clear_display();
+    clear_display();
 
-  success = true;
+    success = true;
 
-  iota_gfx_flush();
+    iota_gfx_flush();
 
-#if DEBUG_TO_SCREEN
-  print_set_sendchar(capture_sendchar);
-#endif
+#    if DEBUG_TO_SCREEN
+    print_set_sendchar(capture_sendchar);
+#    endif
 
 done:
-  return success;
+    return success;
 }
 
 bool iota_gfx_off(void) {
-  bool success = false;
+    bool success = false;
 
-  send_cmd1(DisplayOff);
-  success = true;
+    send_cmd1(DisplayOff);
+    success = true;
 
 done:
-  return success;
-} 
+    return success;
+}
 
 bool iota_gfx_on(void) {
-  bool success = false;
+    bool success = false;
 
-  send_cmd1(DisplayOn);
-  success = true;
+    send_cmd1(DisplayOn);
+    success = true;
 
 done:
-  return success;
+    return success;
 }
 
 void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
-  *matrix->cursor = c;
-  ++matrix->cursor;
-
-  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
-    // We went off the end; scroll the display upwards by one line
-    memmove(&matrix->display[0], &matrix->display[1],
-            MatrixCols * (MatrixRows - 1));
-    matrix->cursor = &matrix->display[MatrixRows - 1][0];
-    memset(matrix->cursor, ' ', MatrixCols);
-  }
+    *matrix->cursor = c;
+    ++matrix->cursor;
+
+    if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
+        // We went off the end; scroll the display upwards by one line
+        memmove(&matrix->display[0], &matrix->display[1], MatrixCols * (MatrixRows - 1));
+        matrix->cursor = &matrix->display[MatrixRows - 1][0];
+        memset(matrix->cursor, ' ', MatrixCols);
+    }
 }
 
 void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
-  matrix->dirty = true;
+    matrix->dirty = true;
 
-  if (c == '\n') {
-    // Clear to end of line from the cursor and then move to the
-    // start of the next line
-    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
+    if (c == '\n') {
+        // Clear to end of line from the cursor and then move to the
+        // start of the next line
+        uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
 
-    while (cursor_col++ < MatrixCols) {
-      matrix_write_char_inner(matrix, ' ');
+        while (cursor_col++ < MatrixCols) {
+            matrix_write_char_inner(matrix, ' ');
+        }
+        return;
     }
-    return;
-  }
 
-  matrix_write_char_inner(matrix, c);
+    matrix_write_char_inner(matrix, c);
 }
 
-void iota_gfx_write_char(uint8_t c) {
-  matrix_write_char(&display, c);
-}
+void iota_gfx_write_char(uint8_t c) { matrix_write_char(&display, c); }
 
 void matrix_write(struct CharacterMatrix *matrix, const char *data) {
-  const char *end = data + strlen(data);
-  while (data < end) {
-    matrix_write_char(matrix, *data);
-    ++data;
-  }
+    const char *end = data + strlen(data);
+    while (data < end) {
+        matrix_write_char(matrix, *data);
+        ++data;
+    }
 }
 
-void iota_gfx_write(const char *data) {
-  matrix_write(&display, data);
-}
+void iota_gfx_write(const char *data) { matrix_write(&display, data); }
 
 void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
-  while (true) {
-    uint8_t c = pgm_read_byte(data);
-    if (c == 0) {
-      return;
+    while (true) {
+        uint8_t c = pgm_read_byte(data);
+        if (c == 0) {
+            return;
+        }
+        matrix_write_char(matrix, c);
+        ++data;
     }
-    matrix_write_char(matrix, c);
-    ++data;
-  }
 }
 
-void iota_gfx_write_P(const char *data) {
-  matrix_write_P(&display, data);
-}
+void iota_gfx_write_P(const char *data) { matrix_write_P(&display, data); }
 
 void matrix_clear(struct CharacterMatrix *matrix) {
-  memset(matrix->display, ' ', sizeof(matrix->display));
-  matrix->cursor = &matrix->display[0][0];
-  matrix->dirty = true;
+    memset(matrix->display, ' ', sizeof(matrix->display));
+    matrix->cursor = &matrix->display[0][0];
+    matrix->dirty  = true;
 }
 
-void iota_gfx_clear_screen(void) {
-  matrix_clear(&display);
-}
+void iota_gfx_clear_screen(void) { matrix_clear(&display); }
 
 void matrix_render(struct CharacterMatrix *matrix) {
-  last_flush = timer_read();
-  iota_gfx_on();
-#if DEBUG_TO_SCREEN
-  ++displaying;
-#endif
+    last_flush = timer_read();
+    iota_gfx_on();
+#    if DEBUG_TO_SCREEN
+    ++displaying;
+#    endif
+
+    // Move to the home position
+    send_cmd3(PageAddr, 0, MatrixRows - 1);
+    send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
+
+    if (i2c_start_write(SSD1306_ADDRESS)) {
+        goto done;
+    }
+    if (i2c_master_write(0x40)) {
+        // Data mode
+        goto done;
+    }
+
+    for (uint8_t row = 0; row < MatrixRows; ++row) {
+        for (uint8_t col = 0; col < MatrixCols; ++col) {
+            const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
+
+            for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
+                uint8_t colBits = pgm_read_byte(glyph + glyphCol);
+                i2c_master_write(colBits);
+            }
 
-  // Move to the home position
-  send_cmd3(PageAddr, 0, MatrixRows - 1);
-  send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
-  if (i2c_start_write(SSD1306_ADDRESS)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < MatrixCols; ++col) {
-      const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
-
-      for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
-        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
-        i2c_master_write(colBits);
-      }
-
-      // 1 column of space between chars (it's not included in the glyph)
-      i2c_master_write(0);
+            // 1 column of space between chars (it's not included in the glyph)
+            i2c_master_write(0);
+        }
     }
-  }
 
-  matrix->dirty = false;
+    matrix->dirty = false;
 
 done:
-  i2c_master_stop();
-#if DEBUG_TO_SCREEN
-  --displaying;
-#endif
+    i2c_master_stop();
+#    if DEBUG_TO_SCREEN
+    --displaying;
+#    endif
 }
 
-void iota_gfx_flush(void) {
-  matrix_render(&display);
-}
+void iota_gfx_flush(void) { matrix_render(&display); }
 
-__attribute__ ((weak))
-void iota_gfx_task_user(void) {
-}
+__attribute__((weak)) void iota_gfx_task_user(void) {}
 
 void iota_gfx_task(void) {
-  iota_gfx_task_user();
+    iota_gfx_task_user();
 
-  if (display.dirty) {
-    iota_gfx_flush();
-  }
+    if (display.dirty) {
+        iota_gfx_flush();
+    }
 
-  if (timer_elapsed(last_flush) > ScreenOffInterval) {
-    iota_gfx_off();
-  }
+    if (timer_elapsed(last_flush) > ScreenOffInterval) {
+        iota_gfx_off();
+    }
 }
 #endif

drivers/avr/ssd1306.h

@@ -7,49 +7,49 @@
 #include "config.h"
 
 enum ssd1306_cmds {
-  DisplayOff = 0xAE,
-  DisplayOn = 0xAF,
-
-  SetContrast = 0x81,
-  DisplayAllOnResume = 0xA4,
-
-  DisplayAllOn = 0xA5,
-  NormalDisplay = 0xA6,
-  InvertDisplay = 0xA7,
-  SetDisplayOffset = 0xD3,
-  SetComPins = 0xda,
-  SetVComDetect = 0xdb,
-  SetDisplayClockDiv = 0xD5,
-  SetPreCharge = 0xd9,
-  SetMultiPlex = 0xa8,
-  SetLowColumn = 0x00,
-  SetHighColumn = 0x10,
-  SetStartLine = 0x40,
-
-  SetMemoryMode = 0x20,
-  ColumnAddr = 0x21,
-  PageAddr = 0x22,
-
-  ComScanInc = 0xc0,
-  ComScanDec = 0xc8,
-  SegRemap = 0xa0,
-  SetChargePump = 0x8d,
-  ExternalVcc = 0x01,
-  SwitchCapVcc = 0x02,
-
-  ActivateScroll = 0x2f,
-  DeActivateScroll = 0x2e,
-  SetVerticalScrollArea = 0xa3,
-  RightHorizontalScroll = 0x26,
-  LeftHorizontalScroll = 0x27,
-  VerticalAndRightHorizontalScroll = 0x29,
-  VerticalAndLeftHorizontalScroll = 0x2a,
+    DisplayOff = 0xAE,
+    DisplayOn  = 0xAF,
+
+    SetContrast        = 0x81,
+    DisplayAllOnResume = 0xA4,
+
+    DisplayAllOn       = 0xA5,
+    NormalDisplay      = 0xA6,
+    InvertDisplay      = 0xA7,
+    SetDisplayOffset   = 0xD3,
+    SetComPins         = 0xda,
+    SetVComDetect      = 0xdb,
+    SetDisplayClockDiv = 0xD5,
+    SetPreCharge       = 0xd9,
+    SetMultiPlex       = 0xa8,
+    SetLowColumn       = 0x00,
+    SetHighColumn      = 0x10,
+    SetStartLine       = 0x40,
+
+    SetMemoryMode = 0x20,
+    ColumnAddr    = 0x21,
+    PageAddr      = 0x22,
+
+    ComScanInc    = 0xc0,
+    ComScanDec    = 0xc8,
+    SegRemap      = 0xa0,
+    SetChargePump = 0x8d,
+    ExternalVcc   = 0x01,
+    SwitchCapVcc  = 0x02,
+
+    ActivateScroll                   = 0x2f,
+    DeActivateScroll                 = 0x2e,
+    SetVerticalScrollArea            = 0xa3,
+    RightHorizontalScroll            = 0x26,
+    LeftHorizontalScroll             = 0x27,
+    VerticalAndRightHorizontalScroll = 0x29,
+    VerticalAndLeftHorizontalScroll  = 0x2a,
 };
 
 // Controls the SSD1306 128x32 OLED display via i2c
 
 #ifndef SSD1306_ADDRESS
-#define SSD1306_ADDRESS 0x3C
+#    define SSD1306_ADDRESS 0x3C
 #endif
 
 #define DisplayHeight 32
@@ -62,9 +62,9 @@ enum ssd1306_cmds {
 #define MatrixCols (DisplayWidth / FontWidth)
 
 struct CharacterMatrix {
-  uint8_t display[MatrixRows][MatrixCols];
-  uint8_t *cursor;
-  bool dirty;
+    uint8_t  display[MatrixRows][MatrixCols];
+    uint8_t *cursor;
+    bool     dirty;
 };
 
 struct CharacterMatrix display;
@@ -88,6 +88,4 @@ void matrix_write(struct CharacterMatrix *matrix, const char *data);
 void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
 void matrix_render(struct CharacterMatrix *matrix);
 
-
-
 #endif

drivers/avr/ws2812.c

@@ -1,25 +1,25 @@
 /*
-* light weight WS2812 lib V2.0b
-*
-* Controls WS2811/WS2812/WS2812B RGB-LEDs
-* Author: Tim (cpldcpu@gmail.com)
-*
-* Jan 18th, 2014  v2.0b Initial Version
-* Nov 29th, 2015  v2.3  Added SK6812RGBW support
-*
-* This program is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+ * light weight WS2812 lib V2.0b
+ *
+ * Controls WS2811/WS2812/WS2812B RGB-LEDs
+ * Author: Tim (cpldcpu@gmail.com)
+ *
+ * Jan 18th, 2014  v2.0b Initial Version
+ * Nov 29th, 2015  v2.3  Added SK6812RGBW support
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 
 #include "ws2812.h"
 #include <avr/interrupt.h>
@@ -30,44 +30,40 @@
 #if !defined(LED_ARRAY) && defined(RGB_MATRIX_ENABLE)
 // LED color buffer
 LED_TYPE led[DRIVER_LED_TOTAL];
-  #define LED_ARRAY led
+#    define LED_ARRAY led
 #endif
 
 #ifdef RGBW_BB_TWI
 
 // Port for the I2C
-#define I2C_DDR DDRD
-#define I2C_PIN PIND
-#define I2C_PORT PORTD
+#    define I2C_DDR DDRD
+#    define I2C_PIN PIND
+#    define I2C_PORT PORTD
 
 // Pins to be used in the bit banging
-#define I2C_CLK 0
-#define I2C_DAT 1
-
-#define I2C_DATA_HI()\
-I2C_DDR &= ~ (1 << I2C_DAT);\
-I2C_PORT |= (1 << I2C_DAT);
-#define I2C_DATA_LO()\
-I2C_DDR |= (1 << I2C_DAT);\
-I2C_PORT &= ~ (1 << I2C_DAT);
-
-#define I2C_CLOCK_HI()\
-I2C_DDR &= ~ (1 << I2C_CLK);\
-I2C_PORT |= (1 << I2C_CLK);
-#define I2C_CLOCK_LO()\
-I2C_DDR |= (1 << I2C_CLK);\
-I2C_PORT &= ~ (1 << I2C_CLK);
-
-#define I2C_DELAY 1
-
-void I2C_WriteBit(unsigned char c)
-{
-    if (c > 0)
-    {
+#    define I2C_CLK 0
+#    define I2C_DAT 1
+
+#    define I2C_DATA_HI()           \
+        I2C_DDR &= ~(1 << I2C_DAT); \
+        I2C_PORT |= (1 << I2C_DAT);
+#    define I2C_DATA_LO()          \
+        I2C_DDR |= (1 << I2C_DAT); \
+        I2C_PORT &= ~(1 << I2C_DAT);
+
+#    define I2C_CLOCK_HI()          \
+        I2C_DDR &= ~(1 << I2C_CLK); \
+        I2C_PORT |= (1 << I2C_CLK);
+#    define I2C_CLOCK_LO()         \
+        I2C_DDR |= (1 << I2C_CLK); \
+        I2C_PORT &= ~(1 << I2C_CLK);
+
+#    define I2C_DELAY 1
+
+void I2C_WriteBit(unsigned char c) {
+    if (c > 0) {
         I2C_DATA_HI();
-    }
-    else
-    {
+    } else {
         I2C_DATA_LO();
     }
 
@@ -77,8 +73,7 @@ void I2C_WriteBit(unsigned char c)
     I2C_CLOCK_LO();
     _delay_us(I2C_DELAY);
 
-    if (c > 0)
-    {
+    if (c > 0) {
         I2C_DATA_LO();
     }
 
@@ -87,9 +82,8 @@ void I2C_WriteBit(unsigned char c)
 
 // Inits bitbanging port, must be called before using the functions below
 //
-void I2C_Init(void)
-{
-    I2C_PORT &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK));
+void I2C_Init(void) {
+    I2C_PORT &= ~((1 << I2C_DAT) | (1 << I2C_CLK));
 
     I2C_CLOCK_HI();
     I2C_DATA_HI();
@@ -99,10 +93,9 @@ void I2C_Init(void)
 
 // Send a START Condition
 //
-void I2C_Start(void)
-{
+void I2C_Start(void) {
     // set both to high at the same time
-    I2C_DDR &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK));
+    I2C_DDR &= ~((1 << I2C_DAT) | (1 << I2C_CLK));
     _delay_us(I2C_DELAY);
 
     I2C_DATA_LO();
@@ -114,8 +107,7 @@ void I2C_Start(void)
 
 // Send a STOP Condition
 //
-void I2C_Stop(void)
-{
+void I2C_Stop(void) {
     I2C_CLOCK_HI();
     _delay_us(I2C_DELAY);
 
@@ -125,106 +117,91 @@ void I2C_Stop(void)
 
 // write a byte to the I2C slave device
 //
-unsigned char I2C_Write(unsigned char c)
-{
-    for (char i = 0; i < 8; i++)
-    {
+unsigned char I2C_Write(unsigned char c) {
+    for (char i = 0; i < 8; i++) {
         I2C_WriteBit(c & 128);
 
         c <<= 1;
     }
 
-
     I2C_WriteBit(0);
     _delay_us(I2C_DELAY);
     _delay_us(I2C_DELAY);
 
     // _delay_us(I2C_DELAY);
-    //return I2C_ReadBit();
+    // return I2C_ReadBit();
     return 0;
 }
 
-
 #endif
 
 #ifdef RGB_MATRIX_ENABLE
 // Set an led in the buffer to a color
-void inline ws2812_setled(int i, uint8_t r, uint8_t g, uint8_t b)
-{
+void inline ws2812_setled(int i, uint8_t r, uint8_t g, uint8_t b) {
     led[i].r = r;
     led[i].g = g;
     led[i].b = b;
 }
 
-void ws2812_setled_all  (uint8_t r, uint8_t g, uint8_t b)
-{
-  for (int i = 0; i < sizeof(led)/sizeof(led[0]); i++) {
-    led[i].r = r;
-    led[i].g = g;
-    led[i].b = b;
-  }
+void ws2812_setled_all(uint8_t r, uint8_t g, uint8_t b) {
+    for (int i = 0; i < sizeof(led) / sizeof(led[0]); i++) {
+        led[i].r = r;
+        led[i].g = g;
+        led[i].b = b;
+    }
 }
 #endif
 
 // Setleds for standard RGB
-void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds)
-{
-   // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
-   ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF));
+void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {
+    // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
+    ws2812_setleds_pin(ledarray, leds, _BV(RGB_DI_PIN & 0xF));
 }
 
-void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask)
-{
-  // ws2812_DDRREG |= pinmask; // Enable DDR
-  // new universal format (DDR)
-  _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask;
+void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask) {
+    // ws2812_DDRREG |= pinmask; // Enable DDR
+    // new universal format (DDR)
+    _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask;
 
-  ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask);
-  _delay_us(50);
+    ws2812_sendarray_mask((uint8_t *)ledarray, leds + leds + leds, pinmask);
+    _delay_us(50);
 }
 
 // Setleds for SK6812RGBW
-void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds)
-{
-
-  #ifdef RGBW_BB_TWI
+void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds) {
+#ifdef RGBW_BB_TWI
     uint8_t sreg_prev, twcr_prev;
-    sreg_prev=SREG;
-    twcr_prev=TWCR;
+    sreg_prev = SREG;
+    twcr_prev = TWCR;
     cli();
-    TWCR &= ~(1<<TWEN);
+    TWCR &= ~(1 << TWEN);
     I2C_Init();
     I2C_Start();
     I2C_Write(0x84);
-    uint16_t datlen = leds<<2;
-    uint8_t curbyte;
-    uint8_t * data = (uint8_t*)ledarray;
+    uint16_t datlen = leds << 2;
+    uint8_t  curbyte;
+    uint8_t *data = (uint8_t *)ledarray;
     while (datlen--) {
-      curbyte=*data++;
-      I2C_Write(curbyte);
+        curbyte = *data++;
+        I2C_Write(curbyte);
     }
     I2C_Stop();
-    SREG=sreg_prev;
-    TWCR=twcr_prev;
-  #endif
-
-
-  // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR
-  // new universal format (DDR)
-  _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF);
+    SREG = sreg_prev;
+    TWCR = twcr_prev;
+#endif
 
-  ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF));
+    // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR
+    // new universal format (DDR)
+    _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF);
 
+    ws2812_sendarray_mask((uint8_t *)ledarray, leds << 2, _BV(RGB_DI_PIN & 0xF));
 
-  #ifndef RGBW_BB_TWI
+#ifndef RGBW_BB_TWI
     _delay_us(80);
-  #endif
+#endif
 }
 
-void ws2812_sendarray(uint8_t *data,uint16_t datlen)
-{
-  ws2812_sendarray_mask(data,datlen,_BV(RGB_DI_PIN & 0xF));
-}
+void ws2812_sendarray(uint8_t *data, uint16_t datlen) { ws2812_sendarray_mask(data, datlen, _BV(RGB_DI_PIN & 0xF)); }
 
 /*
   This routine writes an array of bytes with RGB values to the Dataout pin
@@ -232,136 +209,133 @@ void ws2812_sendarray(uint8_t *data,uint16_t datlen)
 */
 
 // Timing in ns
-#define w_zeropulse   350
-#define w_onepulse    900
+#define w_zeropulse 350
+#define w_onepulse 900
 #define w_totalperiod 1250
 
 // Fixed cycles used by the inner loop
-#define w_fixedlow    2
-#define w_fixedhigh   4
-#define w_fixedtotal  8
+#define w_fixedlow 2
+#define w_fixedhigh 4
+#define w_fixedtotal 8
 
 // Insert NOPs to match the timing, if possible
-#define w_zerocycles    (((F_CPU/1000)*w_zeropulse          )/1000000)
-#define w_onecycles     (((F_CPU/1000)*w_onepulse    +500000)/1000000)
-#define w_totalcycles   (((F_CPU/1000)*w_totalperiod +500000)/1000000)
+#define w_zerocycles (((F_CPU / 1000) * w_zeropulse) / 1000000)
+#define w_onecycles (((F_CPU / 1000) * w_onepulse + 500000) / 1000000)
+#define w_totalcycles (((F_CPU / 1000) * w_totalperiod + 500000) / 1000000)
 
 // w1 - nops between rising edge and falling edge - low
-#define w1 (w_zerocycles-w_fixedlow)
+#define w1 (w_zerocycles - w_fixedlow)
 // w2   nops between fe low and fe high
-#define w2 (w_onecycles-w_fixedhigh-w1)
+#define w2 (w_onecycles - w_fixedhigh - w1)
 // w3   nops to complete loop
-#define w3 (w_totalcycles-w_fixedtotal-w1-w2)
+#define w3 (w_totalcycles - w_fixedtotal - w1 - w2)
 
-#if w1>0
-  #define w1_nops w1
+#if w1 > 0
+#    define w1_nops w1
 #else
-  #define w1_nops  0
+#    define w1_nops 0
 #endif
 
 // The only critical timing parameter is the minimum pulse length of the "0"
 // Warn or throw error if this timing can not be met with current F_CPU settings.
-#define w_lowtime ((w1_nops+w_fixedlow)*1000000)/(F_CPU/1000)
-#if w_lowtime>550
-   #error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?"
-#elif w_lowtime>450
-   #warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)."
-   #warning "Please consider a higher clockspeed, if possible"
+#define w_lowtime ((w1_nops + w_fixedlow) * 1000000) / (F_CPU / 1000)
+#if w_lowtime > 550
+#    error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?"
+#elif w_lowtime > 450
+#    warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)."
+#    warning "Please consider a higher clockspeed, if possible"
 #endif
 
-#if w2>0
-#define w2_nops w2
+#if w2 > 0
+#    define w2_nops w2
 #else
-#define w2_nops  0
+#    define w2_nops 0
 #endif
 
-#if w3>0
-#define w3_nops w3
+#if w3 > 0
+#    define w3_nops w3
 #else
-#define w3_nops  0
+#    define w3_nops 0
 #endif
 
-#define w_nop1  "nop      \n\t"
-#define w_nop2  "rjmp .+0 \n\t"
-#define w_nop4  w_nop2 w_nop2
-#define w_nop8  w_nop4 w_nop4
+#define w_nop1 "nop      \n\t"
+#define w_nop2 "rjmp .+0 \n\t"
+#define w_nop4 w_nop2 w_nop2
+#define w_nop8 w_nop4 w_nop4
 #define w_nop16 w_nop8 w_nop8
 
-void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi)
-{
-  uint8_t curbyte,ctr,masklo;
-  uint8_t sreg_prev;
-
-  // masklo  =~maskhi&ws2812_PORTREG;
-  // maskhi |=        ws2812_PORTREG;
-  masklo  =~maskhi&_SFR_IO8((RGB_DI_PIN >> 4) + 2);
-  maskhi |=        _SFR_IO8((RGB_DI_PIN >> 4) + 2);
-  sreg_prev=SREG;
-  cli();
-
-  while (datlen--) {
-    curbyte=(*data++);
-
-    asm volatile(
-    "       ldi   %0,8  \n\t"
-    "loop%=:            \n\t"
-    "       out   %2,%3 \n\t"    //  '1' [01] '0' [01] - re
-#if (w1_nops&1)
-w_nop1
+void inline ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t maskhi) {
+    uint8_t curbyte, ctr, masklo;
+    uint8_t sreg_prev;
+
+    // masklo  =~maskhi&ws2812_PORTREG;
+    // maskhi |=        ws2812_PORTREG;
+    masklo = ~maskhi & _SFR_IO8((RGB_DI_PIN >> 4) + 2);
+    maskhi |= _SFR_IO8((RGB_DI_PIN >> 4) + 2);
+    sreg_prev = SREG;
+    cli();
+
+    while (datlen--) {
+        curbyte = (*data++);
+
+        asm volatile("       ldi   %0,8  \n\t"
+                     "loop%=:            \n\t"
+                     "       out   %2,%3 \n\t"  //  '1' [01] '0' [01] - re
+#if (w1_nops & 1)
+                     w_nop1
 #endif
-#if (w1_nops&2)
-w_nop2
+#if (w1_nops & 2)
+                         w_nop2
 #endif
-#if (w1_nops&4)
-w_nop4
+#if (w1_nops & 4)
+                             w_nop4
 #endif
-#if (w1_nops&8)
-w_nop8
+#if (w1_nops & 8)
+                                 w_nop8
 #endif
-#if (w1_nops&16)
-w_nop16
+#if (w1_nops & 16)
+                                     w_nop16
 #endif
-    "       sbrs  %1,7  \n\t"    //  '1' [03] '0' [02]
-    "       out   %2,%4 \n\t"    //  '1' [--] '0' [03] - fe-low
-    "       lsl   %1    \n\t"    //  '1' [04] '0' [04]
-#if (w2_nops&1)
-  w_nop1
+                     "       sbrs  %1,7  \n\t"  //  '1' [03] '0' [02]
+                     "       out   %2,%4 \n\t"  //  '1' [--] '0' [03] - fe-low
+                     "       lsl   %1    \n\t"  //  '1' [04] '0' [04]
+#if (w2_nops & 1)
+                     w_nop1
 #endif
-#if (w2_nops&2)
-  w_nop2
+#if (w2_nops & 2)
+                         w_nop2
 #endif
-#if (w2_nops&4)
-  w_nop4
+#if (w2_nops & 4)
+                             w_nop4
 #endif
-#if (w2_nops&8)
-  w_nop8
+#if (w2_nops & 8)
+                                 w_nop8
 #endif
-#if (w2_nops&16)
-  w_nop16
+#if (w2_nops & 16)
+                                     w_nop16
 #endif
-    "       out   %2,%4 \n\t"    //  '1' [+1] '0' [+1] - fe-high
-#if (w3_nops&1)
-w_nop1
+                     "       out   %2,%4 \n\t"  //  '1' [+1] '0' [+1] - fe-high
+#if (w3_nops & 1)
+                     w_nop1
 #endif
-#if (w3_nops&2)
-w_nop2
+#if (w3_nops & 2)
+                         w_nop2
 #endif
-#if (w3_nops&4)
-w_nop4
+#if (w3_nops & 4)
+                             w_nop4
 #endif
-#if (w3_nops&8)
-w_nop8
+#if (w3_nops & 8)
+                                 w_nop8
 #endif
-#if (w3_nops&16)
-w_nop16
+#if (w3_nops & 16)
+                                     w_nop16
 #endif
 
-    "       dec   %0    \n\t"    //  '1' [+2] '0' [+2]
-    "       brne  loop%=\n\t"    //  '1' [+3] '0' [+4]
-    :	"=&d" (ctr)
-    :	"r" (curbyte), "I" (_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r" (maskhi), "r" (masklo)
-    );
-  }
+                     "       dec   %0    \n\t"  //  '1' [+2] '0' [+2]
+                     "       brne  loop%=\n\t"  //  '1' [+3] '0' [+4]
+                     : "=&d"(ctr)
+                     : "r"(curbyte), "I"(_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r"(maskhi), "r"(masklo));
+    }
 
-  SREG=sreg_prev;
+    SREG = sreg_prev;
 }

drivers/avr/ws2812.h

@@ -43,12 +43,12 @@
  *         - Wait 50�s to reset the LEDs
  */
 #ifdef RGB_MATRIX_ENABLE
-void ws2812_setled      (int index, uint8_t r, uint8_t g, uint8_t b);
-void ws2812_setled_all  (uint8_t r, uint8_t g, uint8_t b);
+void ws2812_setled(int index, uint8_t r, uint8_t g, uint8_t b);
+void ws2812_setled_all(uint8_t r, uint8_t g, uint8_t b);
 #endif
 
-void ws2812_setleds     (LED_TYPE *ledarray, uint16_t number_of_leds);
-void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);
+void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
+void ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pinmask);
 void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
 
 /*
@@ -58,18 +58,17 @@ void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
  * The length is the number of bytes to send - three per LED.
  */
 
-void ws2812_sendarray     (uint8_t *array,uint16_t length);
-void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask);
-
+void ws2812_sendarray(uint8_t *array, uint16_t length);
+void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask);
 
 /*
  * Internal defines
  */
 #ifndef CONCAT
-#define CONCAT(a, b)            a ## b
+#    define CONCAT(a, b) a##b
 #endif
 #ifndef CONCAT_EXP
-#define CONCAT_EXP(a, b)   CONCAT(a, b)
+#    define CONCAT_EXP(a, b) CONCAT(a, b)
 #endif
 
 #endif /* LIGHT_WS2812_H_ */

drivers/boards/GENERIC_STM32_F303XC/board.c

@@ -23,42 +23,33 @@
  *          This variable is used by the HAL when initializing the PAL driver.
  */
 const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
+#    if STM32_HAS_GPIOA
+    {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
+#    endif
+#    if STM32_HAS_GPIOB
+    {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
+#    endif
+#    if STM32_HAS_GPIOC
+    {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
+#    endif
+#    if STM32_HAS_GPIOD
+    {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
+#    endif
+#    if STM32_HAS_GPIOE
+    {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
+#    endif
+#    if STM32_HAS_GPIOF
+    {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
+#    endif
+#    if STM32_HAS_GPIOG
+    {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
+#    endif
+#    if STM32_HAS_GPIOH
+    {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
+#    endif
+#    if STM32_HAS_GPIOI
+    {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+#    endif
 };
 #endif
 
@@ -70,8 +61,8 @@ void enter_bootloader_mode_if_requested(void);
  *          and before any other initialization.
  */
 void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
+    enter_bootloader_mode_if_requested();
+    stm32_clock_init();
 }
 
 #if HAL_USE_SDC || defined(__DOXYGEN__)
@@ -79,20 +70,18 @@ void __early_init(void) {
  * @brief   SDC card detection.
  */
 bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
+    (void)sdcp;
+    /* TODO: Fill the implementation.*/
+    return true;
 }
 
 /**
  * @brief   SDC card write protection detection.
  */
 bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
+    (void)sdcp;
+    /* TODO: Fill the implementation.*/
+    return false;
 }
 #endif /* HAL_USE_SDC */
 
@@ -101,20 +90,18 @@ bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
  * @brief   MMC_SPI card detection.
  */
 bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
+    (void)mmcp;
+    /* TODO: Fill the implementation.*/
+    return true;
 }
 
 /**
  * @brief   MMC_SPI card write protection detection.
  */
 bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
+    (void)mmcp;
+    /* TODO: Fill the implementation.*/
+    return false;
 }
 #endif
 
@@ -122,5 +109,4 @@ bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
  * @brief   Board-specific initialization code.
  * @todo    Add your board-specific code, if any.
  */
-void boardInit(void) {
-}
+void boardInit(void) {}

drivers/boards/IC_TEENSY_3_1/board.h

@@ -25,13 +25,13 @@
  * Board identifier.
  */
 #define BOARD_PJRC_TEENSY_3_1
-#define BOARD_NAME                  "PJRC Teensy 3.1"
+#define BOARD_NAME "PJRC Teensy 3.1"
 
 /* External 16 MHz crystal */
-#define KINETIS_XTAL_FREQUENCY      16000000UL
+#define KINETIS_XTAL_FREQUENCY 16000000UL
 
 /* Use internal capacitors for the crystal */
-#define KINETIS_BOARD_OSCILLATOR_SETTING OSC_CR_SC8P|OSC_CR_SC2P
+#define KINETIS_BOARD_OSCILLATOR_SETTING OSC_CR_SC8P | OSC_CR_SC2P
 
 /*
  * MCU type
@@ -41,79 +41,79 @@
 /*
  * IO pins assignments.
  */
-#define PORTA_PIN0                  0
-#define PORTA_PIN1                  1
-#define PORTA_PIN2                  2
-#define PORTA_PIN3                  3
-#define TEENSY_PIN33                4
-#define TEENSY_PIN24                5
-#define PORTA_PIN6                  6
-#define PORTA_PIN7                  7
-#define PORTA_PIN8                  8
-#define PORTA_PIN9                  9
-#define PORTA_PIN10                 10
-#define PORTA_PIN11                 11
-#define TEENSY_PIN3                 12
-#define TEENSY_PIN4                 13
-#define PORTA_PIN14                 14
-#define PORTA_PIN15                 15
-#define PORTA_PIN16                 16
-#define PORTA_PIN17                 17
-#define PORTA_PIN18                 18
-#define PORTA_PIN19                 19
-#define PORTA_PIN20                 20
-#define PORTA_PIN21                 21
-#define PORTA_PIN22                 22
-#define PORTA_PIN23                 23
-#define PORTA_PIN24                 24
-#define PORTA_PIN25                 25
-#define PORTA_PIN26                 26
-#define PORTA_PIN27                 27
-#define PORTA_PIN28                 28
-#define PORTA_PIN29                 29
-#define PORTA_PIN30                 30
-#define PORTA_PIN31                 31
+#define PORTA_PIN0 0
+#define PORTA_PIN1 1
+#define PORTA_PIN2 2
+#define PORTA_PIN3 3
+#define TEENSY_PIN33 4
+#define TEENSY_PIN24 5
+#define PORTA_PIN6 6
+#define PORTA_PIN7 7
+#define PORTA_PIN8 8
+#define PORTA_PIN9 9
+#define PORTA_PIN10 10
+#define PORTA_PIN11 11
+#define TEENSY_PIN3 12
+#define TEENSY_PIN4 13
+#define PORTA_PIN14 14
+#define PORTA_PIN15 15
+#define PORTA_PIN16 16
+#define PORTA_PIN17 17
+#define PORTA_PIN18 18
+#define PORTA_PIN19 19
+#define PORTA_PIN20 20
+#define PORTA_PIN21 21
+#define PORTA_PIN22 22
+#define PORTA_PIN23 23
+#define PORTA_PIN24 24
+#define PORTA_PIN25 25
+#define PORTA_PIN26 26
+#define PORTA_PIN27 27
+#define PORTA_PIN28 28
+#define PORTA_PIN29 29
+#define PORTA_PIN30 30
+#define PORTA_PIN31 31
 
-#define TEENSY_PIN3_IOPORT  IOPORT1
-#define TEENSY_PIN4_IOPORT  IOPORT1
+#define TEENSY_PIN3_IOPORT IOPORT1
+#define TEENSY_PIN4_IOPORT IOPORT1
 #define TEENSY_PIN24_IOPORT IOPORT1
 #define TEENSY_PIN33_IOPORT IOPORT1
 
-#define TEENSY_PIN16                0
-#define TEENSY_PIN17                1
-#define TEENSY_PIN19                2
-#define TEENSY_PIN18                3
-#define PORTB_PIN4                  4
-#define PORTB_PIN5                  5
-#define PORTB_PIN6                  6
-#define PORTB_PIN7                  7
-#define PORTB_PIN8                  8
-#define PORTB_PIN9                  9
-#define PORTB_PIN10                 10
-#define PORTB_PIN11                 11
-#define PORTB_PIN12                 12
-#define PORTB_PIN13                 13
-#define PORTB_PIN14                 14
-#define PORTB_PIN15                 15
-#define TEENSY_PIN0                 16
-#define TEENSY_PIN1                 17
-#define TEENSY_PIN32                18
-#define TEENSY_PIN25                19
-#define PORTB_PIN20                 20
-#define PORTB_PIN21                 21
-#define PORTB_PIN22                 22
-#define PORTB_PIN23                 23
-#define PORTB_PIN24                 24
-#define PORTB_PIN25                 25
-#define PORTB_PIN26                 26
-#define PORTB_PIN27                 27
-#define PORTB_PIN28                 28
-#define PORTB_PIN29                 29
-#define PORTB_PIN30                 30
-#define PORTB_PIN31                 31
+#define TEENSY_PIN16 0
+#define TEENSY_PIN17 1
+#define TEENSY_PIN19 2
+#define TEENSY_PIN18 3
+#define PORTB_PIN4 4
+#define PORTB_PIN5 5
+#define PORTB_PIN6 6
+#define PORTB_PIN7 7
+#define PORTB_PIN8 8
+#define PORTB_PIN9 9
+#define PORTB_PIN10 10
+#define PORTB_PIN11 11
+#define PORTB_PIN12 12
+#define PORTB_PIN13 13
+#define PORTB_PIN14 14
+#define PORTB_PIN15 15
+#define TEENSY_PIN0 16
+#define TEENSY_PIN1 17
+#define TEENSY_PIN32 18
+#define TEENSY_PIN25 19
+#define PORTB_PIN20 20
+#define PORTB_PIN21 21
+#define PORTB_PIN22 22
+#define PORTB_PIN23 23
+#define PORTB_PIN24 24
+#define PORTB_PIN25 25
+#define PORTB_PIN26 26
+#define PORTB_PIN27 27
+#define PORTB_PIN28 28
+#define PORTB_PIN29 29
+#define PORTB_PIN30 30
+#define PORTB_PIN31 31
 
-#define TEENSY_PIN0_IOPORT  IOPORT2
-#define TEENSY_PIN1_IOPORT  IOPORT2
+#define TEENSY_PIN0_IOPORT IOPORT2
+#define TEENSY_PIN1_IOPORT IOPORT2
 #define TEENSY_PIN16_IOPORT IOPORT2
 #define TEENSY_PIN17_IOPORT IOPORT2
 #define TEENSY_PIN18_IOPORT IOPORT2
@@ -121,40 +121,40 @@
 #define TEENSY_PIN25_IOPORT IOPORT2
 #define TEENSY_PIN32_IOPORT IOPORT2
 
-#define TEENSY_PIN15                0
-#define TEENSY_PIN22                1
-#define TEENSY_PIN23                2
-#define TEENSY_PIN9                 3
-#define TEENSY_PIN10                4
-#define TEENSY_PIN13                5
-#define TEENSY_PIN11                6
-#define TEENSY_PIN12                7
-#define TEENSY_PIN28                8
-#define TEENSY_PIN27                9
-#define TEENSY_PIN29                10
-#define TEENSY_PIN30                11
-#define PORTC_PIN12                 12
-#define PORTC_PIN13                 13
-#define PORTC_PIN14                 14
-#define PORTC_PIN15                 15
-#define PORTC_PIN16                 16
-#define PORTC_PIN17                 17
-#define PORTC_PIN18                 18
-#define PORTC_PIN19                 19
-#define PORTC_PIN20                 20
-#define PORTC_PIN21                 21
-#define PORTC_PIN22                 22
-#define PORTC_PIN23                 23
-#define PORTC_PIN24                 24
-#define PORTC_PIN25                 25
-#define PORTC_PIN26                 26
-#define PORTC_PIN27                 27
-#define PORTC_PIN28                 28
-#define PORTC_PIN29                 29
-#define PORTC_PIN30                 30
-#define PORTC_PIN31                 31
+#define TEENSY_PIN15 0
+#define TEENSY_PIN22 1
+#define TEENSY_PIN23 2
+#define TEENSY_PIN9 3
+#define TEENSY_PIN10 4
+#define TEENSY_PIN13 5
+#define TEENSY_PIN11 6
+#define TEENSY_PIN12 7
+#define TEENSY_PIN28 8
+#define TEENSY_PIN27 9
+#define TEENSY_PIN29 10
+#define TEENSY_PIN30 11
+#define PORTC_PIN12 12
+#define PORTC_PIN13 13
+#define PORTC_PIN14 14
+#define PORTC_PIN15 15
+#define PORTC_PIN16 16
+#define PORTC_PIN17 17
+#define PORTC_PIN18 18
+#define PORTC_PIN19 19
+#define PORTC_PIN20 20
+#define PORTC_PIN21 21
+#define PORTC_PIN22 22
+#define PORTC_PIN23 23
+#define PORTC_PIN24 24
+#define PORTC_PIN25 25
+#define PORTC_PIN26 26
+#define PORTC_PIN27 27
+#define PORTC_PIN28 28
+#define PORTC_PIN29 29
+#define PORTC_PIN30 30
+#define PORTC_PIN31 31
 
-#define TEENSY_PIN9_IOPORT  IOPORT3
+#define TEENSY_PIN9_IOPORT IOPORT3
 #define TEENSY_PIN10_IOPORT IOPORT3
 #define TEENSY_PIN11_IOPORT IOPORT3
 #define TEENSY_PIN12_IOPORT IOPORT3
@@ -167,129 +167,129 @@
 #define TEENSY_PIN29_IOPORT IOPORT3
 #define TEENSY_PIN30_IOPORT IOPORT3
 
-#define TEENSY_PIN2                 0
-#define TEENSY_PIN14                1
-#define TEENSY_PIN7                 2
-#define TEENSY_PIN8                 3
-#define TEENSY_PIN6                 4
-#define TEENSY_PIN20                5
-#define TEENSY_PIN21                6
-#define TEENSY_PIN5                 7
-#define PORTD_PIN8                  8
-#define PORTD_PIN9                  9
-#define PORTD_PIN10                 10
-#define PORTD_PIN11                 11
-#define PORTD_PIN12                 12
-#define PORTD_PIN13                 13
-#define PORTD_PIN14                 14
-#define PORTD_PIN15                 15
-#define PORTD_PIN16                 16
-#define PORTD_PIN17                 17
-#define PORTD_PIN18                 18
-#define PORTD_PIN19                 19
-#define PORTD_PIN20                 20
-#define PORTD_PIN21                 21
-#define PORTD_PIN22                 22
-#define PORTD_PIN23                 23
-#define PORTD_PIN24                 24
-#define PORTD_PIN25                 25
-#define PORTD_PIN26                 26
-#define PORTD_PIN27                 27
-#define PORTD_PIN28                 28
-#define PORTD_PIN29                 29
-#define PORTD_PIN30                 30
-#define PORTD_PIN31                 31
+#define TEENSY_PIN2 0
+#define TEENSY_PIN14 1
+#define TEENSY_PIN7 2
+#define TEENSY_PIN8 3
+#define TEENSY_PIN6 4
+#define TEENSY_PIN20 5
+#define TEENSY_PIN21 6
+#define TEENSY_PIN5 7
+#define PORTD_PIN8 8
+#define PORTD_PIN9 9
+#define PORTD_PIN10 10
+#define PORTD_PIN11 11
+#define PORTD_PIN12 12
+#define PORTD_PIN13 13
+#define PORTD_PIN14 14
+#define PORTD_PIN15 15
+#define PORTD_PIN16 16
+#define PORTD_PIN17 17
+#define PORTD_PIN18 18
+#define PORTD_PIN19 19
+#define PORTD_PIN20 20
+#define PORTD_PIN21 21
+#define PORTD_PIN22 22
+#define PORTD_PIN23 23
+#define PORTD_PIN24 24
+#define PORTD_PIN25 25
+#define PORTD_PIN26 26
+#define PORTD_PIN27 27
+#define PORTD_PIN28 28
+#define PORTD_PIN29 29
+#define PORTD_PIN30 30
+#define PORTD_PIN31 31
 
-#define TEENSY_PIN2_IOPORT  IOPORT4
-#define TEENSY_PIN5_IOPORT  IOPORT4
-#define TEENSY_PIN6_IOPORT  IOPORT4
-#define TEENSY_PIN7_IOPORT  IOPORT4
-#define TEENSY_PIN8_IOPORT  IOPORT4
+#define TEENSY_PIN2_IOPORT IOPORT4
+#define TEENSY_PIN5_IOPORT IOPORT4
+#define TEENSY_PIN6_IOPORT IOPORT4
+#define TEENSY_PIN7_IOPORT IOPORT4
+#define TEENSY_PIN8_IOPORT IOPORT4
 #define TEENSY_PIN14_IOPORT IOPORT4
 #define TEENSY_PIN20_IOPORT IOPORT4
 #define TEENSY_PIN21_IOPORT IOPORT4
 
-#define TEENSY_PIN31                0
-#define TEENSY_PIN26                1
-#define PORTE_PIN2                  2
-#define PORTE_PIN3                  3
-#define PORTE_PIN4                  4
-#define PORTE_PIN5                  5
-#define PORTE_PIN6                  6
-#define PORTE_PIN7                  7
-#define PORTE_PIN8                  8
-#define PORTE_PIN9                  9
-#define PORTE_PIN10                 10
-#define PORTE_PIN11                 11
-#define PORTE_PIN12                 12
-#define PORTE_PIN13                 13
-#define PORTE_PIN14                 14
-#define PORTE_PIN15                 15
-#define PORTE_PIN16                 16
-#define PORTE_PIN17                 17
-#define PORTE_PIN18                 18
-#define PORTE_PIN19                 19
-#define PORTE_PIN20                 20
-#define PORTE_PIN21                 21
-#define PORTE_PIN22                 22
-#define PORTE_PIN23                 23
-#define PORTE_PIN24                 24
-#define PORTE_PIN25                 25
-#define PORTE_PIN26                 26
-#define PORTE_PIN27                 27
-#define PORTE_PIN28                 28
-#define PORTE_PIN29                 29
-#define PORTE_PIN30                 30
-#define PORTE_PIN31                 31
+#define TEENSY_PIN31 0
+#define TEENSY_PIN26 1
+#define PORTE_PIN2 2
+#define PORTE_PIN3 3
+#define PORTE_PIN4 4
+#define PORTE_PIN5 5
+#define PORTE_PIN6 6
+#define PORTE_PIN7 7
+#define PORTE_PIN8 8
+#define PORTE_PIN9 9
+#define PORTE_PIN10 10
+#define PORTE_PIN11 11
+#define PORTE_PIN12 12
+#define PORTE_PIN13 13
+#define PORTE_PIN14 14
+#define PORTE_PIN15 15
+#define PORTE_PIN16 16
+#define PORTE_PIN17 17
+#define PORTE_PIN18 18
+#define PORTE_PIN19 19
+#define PORTE_PIN20 20
+#define PORTE_PIN21 21
+#define PORTE_PIN22 22
+#define PORTE_PIN23 23
+#define PORTE_PIN24 24
+#define PORTE_PIN25 25
+#define PORTE_PIN26 26
+#define PORTE_PIN27 27
+#define PORTE_PIN28 28
+#define PORTE_PIN29 29
+#define PORTE_PIN30 30
+#define PORTE_PIN31 31
 
 #define TEENSY_PIN26_IOPORT IOPORT5
 #define TEENSY_PIN31_IOPORT IOPORT5
 
-#define LINE_PIN1           PAL_LINE(TEENSY_PIN1_IOPORT, TEENSY_PIN1)
-#define LINE_PIN2           PAL_LINE(TEENSY_PIN2_IOPORT, TEENSY_PIN2)
-#define LINE_PIN3           PAL_LINE(TEENSY_PIN3_IOPORT, TEENSY_PIN3)
-#define LINE_PIN4           PAL_LINE(TEENSY_PIN4_IOPORT, TEENSY_PIN4)
-#define LINE_PIN5           PAL_LINE(TEENSY_PIN5_IOPORT, TEENSY_PIN5)
-#define LINE_PIN6           PAL_LINE(TEENSY_PIN6_IOPORT, TEENSY_PIN6)
-#define LINE_PIN7           PAL_LINE(TEENSY_PIN7_IOPORT, TEENSY_PIN7)
-#define LINE_PIN8           PAL_LINE(TEENSY_PIN8_IOPORT, TEENSY_PIN8)
-#define LINE_PIN9           PAL_LINE(TEENSY_PIN9_IOPORT, TEENSY_PIN9)
-#define LINE_PIN10          PAL_LINE(TEENSY_PIN10_IOPORT, TEENSY_PIN10)
-#define LINE_PIN11          PAL_LINE(TEENSY_PIN11_IOPORT, TEENSY_PIN11)
-#define LINE_PIN12          PAL_LINE(TEENSY_PIN12_IOPORT, TEENSY_PIN12)
-#define LINE_PIN13          PAL_LINE(TEENSY_PIN13_IOPORT, TEENSY_PIN13)
-#define LINE_PIN14          PAL_LINE(TEENSY_PIN14_IOPORT, TEENSY_PIN14)
-#define LINE_PIN15          PAL_LINE(TEENSY_PIN15_IOPORT, TEENSY_PIN15)
-#define LINE_PIN16          PAL_LINE(TEENSY_PIN16_IOPORT, TEENSY_PIN16)
-#define LINE_PIN17          PAL_LINE(TEENSY_PIN17_IOPORT, TEENSY_PIN17)
-#define LINE_PIN18          PAL_LINE(TEENSY_PIN18_IOPORT, TEENSY_PIN18)
-#define LINE_PIN19          PAL_LINE(TEENSY_PIN19_IOPORT, TEENSY_PIN19)
-#define LINE_PIN20          PAL_LINE(TEENSY_PIN20_IOPORT, TEENSY_PIN20)
-#define LINE_PIN21          PAL_LINE(TEENSY_PIN21_IOPORT, TEENSY_PIN21)
-#define LINE_PIN22          PAL_LINE(TEENSY_PIN22_IOPORT, TEENSY_PIN22)
-#define LINE_PIN23          PAL_LINE(TEENSY_PIN23_IOPORT, TEENSY_PIN23)
-#define LINE_PIN24          PAL_LINE(TEENSY_PIN24_IOPORT, TEENSY_PIN24)
-#define LINE_PIN25          PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25)
-#define LINE_PIN25          PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25)
-#define LINE_PIN26          PAL_LINE(TEENSY_PIN26_IOPORT, TEENSY_PIN26)
-#define LINE_PIN27          PAL_LINE(TEENSY_PIN27_IOPORT, TEENSY_PIN27)
-#define LINE_PIN28          PAL_LINE(TEENSY_PIN28_IOPORT, TEENSY_PIN28)
-#define LINE_PIN29          PAL_LINE(TEENSY_PIN29_IOPORT, TEENSY_PIN29)
-#define LINE_PIN30          PAL_LINE(TEENSY_PIN30_IOPORT, TEENSY_PIN30)
-#define LINE_PIN31          PAL_LINE(TEENSY_PIN31_IOPORT, TEENSY_PIN31)
-#define LINE_PIN32          PAL_LINE(TEENSY_PIN32_IOPORT, TEENSY_PIN32)
-#define LINE_PIN33          PAL_LINE(TEENSY_PIN33_IOPORT, TEENSY_PIN33)
+#define LINE_PIN1 PAL_LINE(TEENSY_PIN1_IOPORT, TEENSY_PIN1)
+#define LINE_PIN2 PAL_LINE(TEENSY_PIN2_IOPORT, TEENSY_PIN2)
+#define LINE_PIN3 PAL_LINE(TEENSY_PIN3_IOPORT, TEENSY_PIN3)
+#define LINE_PIN4 PAL_LINE(TEENSY_PIN4_IOPORT, TEENSY_PIN4)
+#define LINE_PIN5 PAL_LINE(TEENSY_PIN5_IOPORT, TEENSY_PIN5)
+#define LINE_PIN6 PAL_LINE(TEENSY_PIN6_IOPORT, TEENSY_PIN6)
+#define LINE_PIN7 PAL_LINE(TEENSY_PIN7_IOPORT, TEENSY_PIN7)
+#define LINE_PIN8 PAL_LINE(TEENSY_PIN8_IOPORT, TEENSY_PIN8)
+#define LINE_PIN9 PAL_LINE(TEENSY_PIN9_IOPORT, TEENSY_PIN9)
+#define LINE_PIN10 PAL_LINE(TEENSY_PIN10_IOPORT, TEENSY_PIN10)
+#define LINE_PIN11 PAL_LINE(TEENSY_PIN11_IOPORT, TEENSY_PIN11)
+#define LINE_PIN12 PAL_LINE(TEENSY_PIN12_IOPORT, TEENSY_PIN12)
+#define LINE_PIN13 PAL_LINE(TEENSY_PIN13_IOPORT, TEENSY_PIN13)
+#define LINE_PIN14 PAL_LINE(TEENSY_PIN14_IOPORT, TEENSY_PIN14)
+#define LINE_PIN15 PAL_LINE(TEENSY_PIN15_IOPORT, TEENSY_PIN15)
+#define LINE_PIN16 PAL_LINE(TEENSY_PIN16_IOPORT, TEENSY_PIN16)
+#define LINE_PIN17 PAL_LINE(TEENSY_PIN17_IOPORT, TEENSY_PIN17)
+#define LINE_PIN18 PAL_LINE(TEENSY_PIN18_IOPORT, TEENSY_PIN18)
+#define LINE_PIN19 PAL_LINE(TEENSY_PIN19_IOPORT, TEENSY_PIN19)
+#define LINE_PIN20 PAL_LINE(TEENSY_PIN20_IOPORT, TEENSY_PIN20)
+#define LINE_PIN21 PAL_LINE(TEENSY_PIN21_IOPORT, TEENSY_PIN21)
+#define LINE_PIN22 PAL_LINE(TEENSY_PIN22_IOPORT, TEENSY_PIN22)
+#define LINE_PIN23 PAL_LINE(TEENSY_PIN23_IOPORT, TEENSY_PIN23)
+#define LINE_PIN24 PAL_LINE(TEENSY_PIN24_IOPORT, TEENSY_PIN24)
+#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25)
+#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25)
+#define LINE_PIN26 PAL_LINE(TEENSY_PIN26_IOPORT, TEENSY_PIN26)
+#define LINE_PIN27 PAL_LINE(TEENSY_PIN27_IOPORT, TEENSY_PIN27)
+#define LINE_PIN28 PAL_LINE(TEENSY_PIN28_IOPORT, TEENSY_PIN28)
+#define LINE_PIN29 PAL_LINE(TEENSY_PIN29_IOPORT, TEENSY_PIN29)
+#define LINE_PIN30 PAL_LINE(TEENSY_PIN30_IOPORT, TEENSY_PIN30)
+#define LINE_PIN31 PAL_LINE(TEENSY_PIN31_IOPORT, TEENSY_PIN31)
+#define LINE_PIN32 PAL_LINE(TEENSY_PIN32_IOPORT, TEENSY_PIN32)
+#define LINE_PIN33 PAL_LINE(TEENSY_PIN33_IOPORT, TEENSY_PIN33)
 
-#define LINE_LED            LINE_PIN13
+#define LINE_LED LINE_PIN13
 
 #if !defined(_FROM_ASM_)
-#ifdef __cplusplus
+#    ifdef __cplusplus
 extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
+#    endif
+void boardInit(void);
+#    ifdef __cplusplus
 }
-#endif
+#    endif
 #endif /* _FROM_ASM_ */
 
 #endif /* _BOARD_H_ */

drivers/haptic/DRV2605L.c

@@ -20,110 +20,102 @@
 #include <stdio.h>
 #include <math.h>
 
-
 uint8_t DRV2605L_transfer_buffer[2];
 uint8_t DRV2605L_tx_register[0];
 uint8_t DRV2605L_read_buffer[0];
 uint8_t DRV2605L_read_register;
 
-
 void DRV_write(uint8_t drv_register, uint8_t settings) {
-  DRV2605L_transfer_buffer[0] = drv_register;
-  DRV2605L_transfer_buffer[1] = settings;
-  i2c_transmit(DRV2605L_BASE_ADDRESS << 1, DRV2605L_transfer_buffer, 2, 100);
+    DRV2605L_transfer_buffer[0] = drv_register;
+    DRV2605L_transfer_buffer[1] = settings;
+    i2c_transmit(DRV2605L_BASE_ADDRESS << 1, DRV2605L_transfer_buffer, 2, 100);
 }
 
 uint8_t DRV_read(uint8_t regaddress) {
 #ifdef __AVR__
-  i2c_readReg(DRV2605L_BASE_ADDRESS << 1,
-    regaddress, DRV2605L_read_buffer, 1, 100);
-  DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
+    i2c_readReg(DRV2605L_BASE_ADDRESS << 1, regaddress, DRV2605L_read_buffer, 1, 100);
+    DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
 #else
-  DRV2605L_tx_register[0] = regaddress;
-  if (MSG_OK != i2c_transmit_receive(DRV2605L_BASE_ADDRESS << 1,
-    DRV2605L_tx_register, 1,
-    DRV2605L_read_buffer, 1
-)){
-    printf("err reading reg \n");
-  }
-  DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
+    DRV2605L_tx_register[0] = regaddress;
+    if (MSG_OK != i2c_transmit_receive(DRV2605L_BASE_ADDRESS << 1, DRV2605L_tx_register, 1, DRV2605L_read_buffer, 1)) {
+        printf("err reading reg \n");
+    }
+    DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
 #endif
-return DRV2605L_read_register;
+    return DRV2605L_read_register;
 }
 
-void DRV_init(void)
-{
-  i2c_init();
-  /* 0x07 sets DRV2605 into calibration mode */
-  DRV_write(DRV_MODE,0x07); 
+void DRV_init(void) {
+    i2c_init();
+    /* 0x07 sets DRV2605 into calibration mode */
+    DRV_write(DRV_MODE, 0x07);
+
+    //  DRV_write(DRV_FEEDBACK_CTRL,0xB6);
 
-//  DRV_write(DRV_FEEDBACK_CTRL,0xB6);
-    
-  #if FB_ERM_LRA == 0
+#if FB_ERM_LRA == 0
     /* ERM settings */
-  DRV_write(DRV_RATED_VOLT, (RATED_VOLTAGE/21.33)*1000);
-  #if ERM_OPEN_LOOP == 0
-  DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (((V_PEAK*(DRIVE_TIME+BLANKING_TIME+IDISS_TIME))/0.02133)/(DRIVE_TIME-0.0003))); 
-  #elif ERM_OPEN_LOOP == 1
-  DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196));
-  #endif
-  #elif FB_ERM_LRA == 1
-  DRV_write(DRV_RATED_VOLT, ((V_RMS * sqrt(1 - ((4 * ((150+(SAMPLE_TIME*50))*0.000001)) + 0.0003)* F_LRA)/0.02071)));
-  #if LRA_OPEN_LOOP == 0
-    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, ((V_PEAK/sqrt(1-(F_LRA*0.0008))/0.02133)));
-  #elif LRA_OPEN_LOOP == 1
-    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196));
-  #endif
-  #endif
-      
-  DRVREG_FBR FB_SET;
-    FB_SET.Bits.ERM_LRA = FB_ERM_LRA;
+    DRV_write(DRV_RATED_VOLT, (RATED_VOLTAGE / 21.33) * 1000);
+#    if ERM_OPEN_LOOP == 0
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (((V_PEAK * (DRIVE_TIME + BLANKING_TIME + IDISS_TIME)) / 0.02133) / (DRIVE_TIME - 0.0003)));
+#    elif ERM_OPEN_LOOP == 1
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK / 0.02196));
+#    endif
+#elif FB_ERM_LRA == 1
+    DRV_write(DRV_RATED_VOLT, ((V_RMS * sqrt(1 - ((4 * ((150 + (SAMPLE_TIME * 50)) * 0.000001)) + 0.0003) * F_LRA) / 0.02071)));
+#    if LRA_OPEN_LOOP == 0
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, ((V_PEAK / sqrt(1 - (F_LRA * 0.0008)) / 0.02133)));
+#    elif LRA_OPEN_LOOP == 1
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK / 0.02196));
+#    endif
+#endif
+
+    DRVREG_FBR FB_SET;
+    FB_SET.Bits.ERM_LRA      = FB_ERM_LRA;
     FB_SET.Bits.BRAKE_FACTOR = FB_BRAKEFACTOR;
-    FB_SET.Bits.LOOP_GAIN =FB_LOOPGAIN;
-    FB_SET.Bits.BEMF_GAIN = 0; /* auto-calibration populates this field*/
-    DRV_write(DRV_FEEDBACK_CTRL, (uint8_t) FB_SET.Byte);
-  DRVREG_CTRL1 C1_SET;
-    C1_SET.Bits.C1_DRIVE_TIME = DRIVE_TIME;
-    C1_SET.Bits.C1_AC_COUPLE = AC_COUPLE;
+    FB_SET.Bits.LOOP_GAIN    = FB_LOOPGAIN;
+    FB_SET.Bits.BEMF_GAIN    = 0; /* auto-calibration populates this field*/
+    DRV_write(DRV_FEEDBACK_CTRL, (uint8_t)FB_SET.Byte);
+    DRVREG_CTRL1 C1_SET;
+    C1_SET.Bits.C1_DRIVE_TIME    = DRIVE_TIME;
+    C1_SET.Bits.C1_AC_COUPLE     = AC_COUPLE;
     C1_SET.Bits.C1_STARTUP_BOOST = STARTUP_BOOST;
-    DRV_write(DRV_CTRL_1, (uint8_t) C1_SET.Byte);
-  DRVREG_CTRL2 C2_SET;
-    C2_SET.Bits.C2_BIDIR_INPUT = BIDIR_INPUT;
-    C2_SET.Bits.C2_BRAKE_STAB = BRAKE_STAB;
-    C2_SET.Bits.C2_SAMPLE_TIME = SAMPLE_TIME;
+    DRV_write(DRV_CTRL_1, (uint8_t)C1_SET.Byte);
+    DRVREG_CTRL2 C2_SET;
+    C2_SET.Bits.C2_BIDIR_INPUT   = BIDIR_INPUT;
+    C2_SET.Bits.C2_BRAKE_STAB    = BRAKE_STAB;
+    C2_SET.Bits.C2_SAMPLE_TIME   = SAMPLE_TIME;
     C2_SET.Bits.C2_BLANKING_TIME = BLANKING_TIME;
-    C2_SET.Bits.C2_IDISS_TIME = IDISS_TIME;
-    DRV_write(DRV_CTRL_2, (uint8_t) C2_SET.Byte);
-  DRVREG_CTRL3 C3_SET;
-    C3_SET.Bits.C3_LRA_OPEN_LOOP = LRA_OPEN_LOOP;
-    C3_SET.Bits.C3_N_PWM_ANALOG = N_PWM_ANALOG;
-    C3_SET.Bits.C3_LRA_DRIVE_MODE = LRA_DRIVE_MODE;
+    C2_SET.Bits.C2_IDISS_TIME    = IDISS_TIME;
+    DRV_write(DRV_CTRL_2, (uint8_t)C2_SET.Byte);
+    DRVREG_CTRL3 C3_SET;
+    C3_SET.Bits.C3_LRA_OPEN_LOOP   = LRA_OPEN_LOOP;
+    C3_SET.Bits.C3_N_PWM_ANALOG    = N_PWM_ANALOG;
+    C3_SET.Bits.C3_LRA_DRIVE_MODE  = LRA_DRIVE_MODE;
     C3_SET.Bits.C3_DATA_FORMAT_RTO = DATA_FORMAT_RTO;
     C3_SET.Bits.C3_SUPPLY_COMP_DIS = SUPPLY_COMP_DIS;
-    C3_SET.Bits.C3_ERM_OPEN_LOOP = ERM_OPEN_LOOP;
-    C3_SET.Bits.C3_NG_THRESH = NG_THRESH;
-    DRV_write(DRV_CTRL_3, (uint8_t) C3_SET.Byte);
-  DRVREG_CTRL4 C4_SET;
-    C4_SET.Bits.C4_ZC_DET_TIME = ZC_DET_TIME;
+    C3_SET.Bits.C3_ERM_OPEN_LOOP   = ERM_OPEN_LOOP;
+    C3_SET.Bits.C3_NG_THRESH       = NG_THRESH;
+    DRV_write(DRV_CTRL_3, (uint8_t)C3_SET.Byte);
+    DRVREG_CTRL4 C4_SET;
+    C4_SET.Bits.C4_ZC_DET_TIME   = ZC_DET_TIME;
     C4_SET.Bits.C4_AUTO_CAL_TIME = AUTO_CAL_TIME;
-    DRV_write(DRV_CTRL_4, (uint8_t) C4_SET.Byte);
-  DRV_write(DRV_LIB_SELECTION,LIB_SELECTION);
+    DRV_write(DRV_CTRL_4, (uint8_t)C4_SET.Byte);
+    DRV_write(DRV_LIB_SELECTION, LIB_SELECTION);
 
-  DRV_write(DRV_GO, 0x01);
+    DRV_write(DRV_GO, 0x01);
 
-  /* 0x00 sets DRV2605 out of standby and to use internal trigger
-   * 0x01 sets DRV2605 out of standby and to use external trigger */
-  DRV_write(DRV_MODE,0x00); 
+    /* 0x00 sets DRV2605 out of standby and to use internal trigger
+     * 0x01 sets DRV2605 out of standby and to use external trigger */
+    DRV_write(DRV_MODE, 0x00);
 
-//Play greeting sequence
-  DRV_write(DRV_GO, 0x00);
-  DRV_write(DRV_WAVEFORM_SEQ_1, DRV_GREETING);
-  DRV_write(DRV_GO, 0x01);
+    // Play greeting sequence
+    DRV_write(DRV_GO, 0x00);
+    DRV_write(DRV_WAVEFORM_SEQ_1, DRV_GREETING);
+    DRV_write(DRV_GO, 0x01);
 }
 
-void DRV_pulse(uint8_t sequence)
-{
-  DRV_write(DRV_GO, 0x00);
-  DRV_write(DRV_WAVEFORM_SEQ_1, sequence);
-  DRV_write(DRV_GO, 0x01);
+void DRV_pulse(uint8_t sequence) {
+    DRV_write(DRV_GO, 0x00);
+    DRV_write(DRV_WAVEFORM_SEQ_1, sequence);
+    DRV_write(DRV_GO, 0x01);
 }

drivers/haptic/DRV2605L.h

@@ -22,383 +22,383 @@
 
  * Feedback Control Settings */
 #ifndef FB_ERM_LRA
-#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
+#    define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
 #endif
 #ifndef FB_BRAKEFACTOR
-#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#    define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
 #endif
 #ifndef FB_LOOPGAIN
-#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+#    define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
 #endif
 
 /* LRA specific settings */
 #if FB_ERM_LRA == 1
-#ifndef V_RMS
-#define V_RMS 2.0
-#endif
-#ifndef V_PEAK
-#define V_PEAK 2.1
-#endif
-#ifndef F_LRA
-#define F_LRA 205
-#endif
-#ifndef RATED_VOLTAGE
-#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
-#endif
+#    ifndef V_RMS
+#        define V_RMS 2.0
+#    endif
+#    ifndef V_PEAK
+#        define V_PEAK 2.1
+#    endif
+#    ifndef F_LRA
+#        define F_LRA 205
+#    endif
+#    ifndef RATED_VOLTAGE
+#        define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
+#    endif
 #endif
 
 #ifndef RATED_VOLTAGE
-#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
+#    define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
 #endif
 #ifndef V_PEAK
-#define V_PEAK 2.8
+#    define V_PEAK 2.8
 #endif
 
 /* Library Selection */
 #ifndef LIB_SELECTION
-#if FB_ERM_LRA == 1
-#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
-#else
-#define LIB_SELECTION 1
-#endif
+#    if FB_ERM_LRA == 1
+#        define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+#    else
+#        define LIB_SELECTION 1
+#    endif
 #endif
 
 #ifndef DRV_GREETING
-#define DRV_GREETING alert_750ms
+#    define DRV_GREETING alert_750ms
 #endif
 #ifndef DRV_MODE_DEFAULT
-#define DRV_MODE_DEFAULT strong_click1
+#    define DRV_MODE_DEFAULT strong_click1
 #endif
 
 /* Control 1 register settings */
 #ifndef DRIVE_TIME
-#define DRIVE_TIME 25
+#    define DRIVE_TIME 25
 #endif
 #ifndef AC_COUPLE
-#define AC_COUPLE 0
+#    define AC_COUPLE 0
 #endif
 #ifndef STARTUP_BOOST
-#define STARTUP_BOOST 1
+#    define STARTUP_BOOST 1
 #endif
 
 /* Control 2 Settings */
 #ifndef BIDIR_INPUT
-#define BIDIR_INPUT 1
+#    define BIDIR_INPUT 1
 #endif
 #ifndef BRAKE_STAB
-#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
+#    define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
 #endif
-#ifndef SAMPLE_TIME 
-#define SAMPLE_TIME 3
+#ifndef SAMPLE_TIME
+#    define SAMPLE_TIME 3
 #endif
 #ifndef BLANKING_TIME
-#define BLANKING_TIME 1
+#    define BLANKING_TIME 1
 #endif
 #ifndef IDISS_TIME
-#define IDISS_TIME 1
+#    define IDISS_TIME 1
 #endif
 
 /* Control 3 settings */
 #ifndef NG_THRESH
-#define NG_THRESH 2
+#    define NG_THRESH 2
 #endif
 #ifndef ERM_OPEN_LOOP
-#define ERM_OPEN_LOOP 1
+#    define ERM_OPEN_LOOP 1
 #endif
 #ifndef SUPPLY_COMP_DIS
-#define SUPPLY_COMP_DIS 0
+#    define SUPPLY_COMP_DIS 0
 #endif
 #ifndef DATA_FORMAT_RTO
-#define DATA_FORMAT_RTO 0
+#    define DATA_FORMAT_RTO 0
 #endif
 #ifndef LRA_DRIVE_MODE
-#define LRA_DRIVE_MODE 0
+#    define LRA_DRIVE_MODE 0
 #endif
 #ifndef N_PWM_ANALOG
-#define N_PWM_ANALOG 0
+#    define N_PWM_ANALOG 0
 #endif
 #ifndef LRA_OPEN_LOOP
-#define LRA_OPEN_LOOP 0
+#    define LRA_OPEN_LOOP 0
 #endif
 
 /* Control 4 settings */
 #ifndef ZC_DET_TIME
-#define ZC_DET_TIME 0
+#    define ZC_DET_TIME 0
 #endif
 #ifndef AUTO_CAL_TIME
-#define AUTO_CAL_TIME 3
+#    define AUTO_CAL_TIME 3
 #endif
 
 /* register defines -------------------------------------------------------- */
-#define DRV2605L_BASE_ADDRESS       0x5A		/* DRV2605L Base address */
-#define DRV_STATUS                  0x00
-#define DRV_MODE                    0x01
-#define DRV_RTP_INPUT               0x02
-#define DRV_LIB_SELECTION           0x03
-#define DRV_WAVEFORM_SEQ_1          0x04
-#define DRV_WAVEFORM_SEQ_2          0x05
-#define DRV_WAVEFORM_SEQ_3          0x06
-#define DRV_WAVEFORM_SEQ_4          0x07
-#define DRV_WAVEFORM_SEQ_5          0x08
-#define DRV_WAVEFORM_SEQ_6          0x09
-#define DRV_WAVEFORM_SEQ_7          0x0A
-#define DRV_WAVEFORM_SEQ_8          0x0B
-#define DRV_GO                      0x0C
-#define DRV_OVERDRIVE_TIME_OFFSET   0x0D
-#define DRV_SUSTAIN_TIME_OFFSET_P   0x0E
-#define DRV_SUSTAIN_TIME_OFFSET_N   0x0F
-#define DRV_BRAKE_TIME_OFFSET       0x10
-#define DRV_AUDIO_2_VIBE_CTRL       0x11
-#define DRV_AUDIO_2_VIBE_MIN_IN     0x12
-#define DRV_AUDIO_2_VIBE_MAX_IN     0x13
-#define DRV_AUDIO_2_VIBE_MIN_OUTDRV	0x14
-#define DRV_AUDIO_2_VIBE_MAX_OUTDRV	0x15
-#define DRV_RATED_VOLT              0x16
-#define DRV_OVERDRIVE_CLAMP_VOLT    0x17
-#define DRV_AUTO_CALIB_COMP_RESULT  0x18 
-#define DRV_AUTO_CALIB_BEMF_RESULT  0x19
-#define DRV_FEEDBACK_CTRL           0x1A
-#define DRV_CTRL_1                  0x1B
-#define DRV_CTRL_2                  0x1C
-#define DRV_CTRL_3                  0x1D
-#define DRV_CTRL_4                  0x1E
-#define DRV_CTRL_5                  0x1F
-#define DRV_OPEN_LOOP_PERIOD        0x20
-#define DRV_VBAT_VOLT_MONITOR       0x21
-#define DRV_LRA_RESONANCE_PERIOD    0x22
+#define DRV2605L_BASE_ADDRESS 0x5A /* DRV2605L Base address */
+#define DRV_STATUS 0x00
+#define DRV_MODE 0x01
+#define DRV_RTP_INPUT 0x02
+#define DRV_LIB_SELECTION 0x03
+#define DRV_WAVEFORM_SEQ_1 0x04
+#define DRV_WAVEFORM_SEQ_2 0x05
+#define DRV_WAVEFORM_SEQ_3 0x06
+#define DRV_WAVEFORM_SEQ_4 0x07
+#define DRV_WAVEFORM_SEQ_5 0x08
+#define DRV_WAVEFORM_SEQ_6 0x09
+#define DRV_WAVEFORM_SEQ_7 0x0A
+#define DRV_WAVEFORM_SEQ_8 0x0B
+#define DRV_GO 0x0C
+#define DRV_OVERDRIVE_TIME_OFFSET 0x0D
+#define DRV_SUSTAIN_TIME_OFFSET_P 0x0E
+#define DRV_SUSTAIN_TIME_OFFSET_N 0x0F
+#define DRV_BRAKE_TIME_OFFSET 0x10
+#define DRV_AUDIO_2_VIBE_CTRL 0x11
+#define DRV_AUDIO_2_VIBE_MIN_IN 0x12
+#define DRV_AUDIO_2_VIBE_MAX_IN 0x13
+#define DRV_AUDIO_2_VIBE_MIN_OUTDRV 0x14
+#define DRV_AUDIO_2_VIBE_MAX_OUTDRV 0x15
+#define DRV_RATED_VOLT 0x16
+#define DRV_OVERDRIVE_CLAMP_VOLT 0x17
+#define DRV_AUTO_CALIB_COMP_RESULT 0x18
+#define DRV_AUTO_CALIB_BEMF_RESULT 0x19
+#define DRV_FEEDBACK_CTRL 0x1A
+#define DRV_CTRL_1 0x1B
+#define DRV_CTRL_2 0x1C
+#define DRV_CTRL_3 0x1D
+#define DRV_CTRL_4 0x1E
+#define DRV_CTRL_5 0x1F
+#define DRV_OPEN_LOOP_PERIOD 0x20
+#define DRV_VBAT_VOLT_MONITOR 0x21
+#define DRV_LRA_RESONANCE_PERIOD 0x22
 
-void DRV_init(void);
-void DRV_write(const uint8_t drv_register, const uint8_t settings);
+void    DRV_init(void);
+void    DRV_write(const uint8_t drv_register, const uint8_t settings);
 uint8_t DRV_read(const uint8_t regaddress);
-void DRV_pulse(const uint8_t sequence);
+void    DRV_pulse(const uint8_t sequence);
 
-typedef enum DRV_EFFECT{
-  clear_sequence      = 0,
-  strong_click 		    = 1,
-  strong_click_60 		= 2,
-  strong_click_30 		= 3,
-  sharp_click 		    = 4,
-  sharp_click_60      = 5,
-  sharp_click_30      = 6,
-  soft_bump           = 7,
-  soft_bump_60        = 8,
-  soft_bump_30        = 9,
-  dbl_click           = 10,
-  dbl_click_60        = 11,
-  trp_click           = 12,
-  soft_fuzz           = 13,
-  strong_buzz         = 14,
-  alert_750ms         = 15,
-  alert_1000ms        = 16,
-  strong_click1       = 17,
-  strong_click2_80    = 18,
-  strong_click3_60    = 19,
-  strong_click4_30    = 20,
-  medium_click1       = 21,
-  medium_click2_80    = 22,
-  medium_click3_60    = 23,
-  sharp_tick1         = 24,
-  sharp_tick2_80      = 25,
-  sharp_tick3_60      = 26,
-  sh_dblclick_str     = 27,
-  sh_dblclick_str_80  = 28,
-  sh_dblclick_str_60  = 29,
-  sh_dblclick_str_30  = 30,
-  sh_dblclick_med     = 31,
-  sh_dblclick_med_80  = 32,
-  sh_dblclick_med_60  = 33,
-  sh_dblsharp_tick    = 34,
-  sh_dblsharp_tick_80 = 35,
-  sh_dblsharp_tick_60 = 36,
-  lg_dblclick_str     = 37,
-  lg_dblclick_str_80  = 38,
-  lg_dblclick_str_60  = 39,
-  lg_dblclick_str_30  = 40,
-  lg_dblclick_med     = 41,
-  lg_dblclick_med_80  = 42,
-  lg_dblclick_med_60  = 43,
-  lg_dblsharp_tick    = 44,
-  lg_dblsharp_tick_80 = 45,
-  lg_dblsharp_tick_60 = 46,
-  buzz 					= 47,
-  buzz_80				= 48,
-  buzz_60				= 49,
-  buzz_40				= 50,
-  buzz_20				= 51,
-  pulsing_strong      = 52,
-  pulsing_strong_80   = 53,
-  pulsing_medium      = 54,
-  pulsing_medium_80   = 55,
-  pulsing_sharp       = 56,
-  pulsing_sharp_80    = 57,
-  transition_click		= 58,
-  transition_click_80 = 59,
-  transition_click_60	= 60,
-  transition_click_40	= 61,
-  transition_click_20	= 62,
-  transition_click_10	= 63,
-  transition_hum      = 64,
-  transition_hum_80   = 65,
-  transition_hum_60   = 66,
-  transition_hum_40   = 67,
-  transition_hum_20   = 68,
-  transition_hum_10   = 69,
-  transition_rampdown_long_smooth1  = 70,
-  transition_rampdown_long_smooth2  = 71,
-  transition_rampdown_med_smooth1   = 72,
-  transition_rampdown_med_smooth2   = 73,
-  transition_rampdown_short_smooth1 = 74,
-  transition_rampdown_short_smooth2 = 75,
-  transition_rampdown_long_sharp1   = 76,
-  transition_rampdown_long_sharp2   = 77,
-  transition_rampdown_med_sharp1    = 78,
-  transition_rampdown_med_sharp2    = 79,
-  transition_rampdown_short_sharp1  = 80,
-  transition_rampdown_short_sharp2  = 81,
-  transition_rampup_long_smooth1    = 82,
-  transition_rampup_long_smooth2    = 83,
-  transition_rampup_med_smooth1     = 84,
-  transition_rampup_med_smooth2     = 85,
-  transition_rampup_short_smooth1   = 86,
-  transition_rampup_short_smooth2   = 87,
-  transition_rampup_long_sharp1     = 88,
-  transition_rampup_long_sharp2     = 89,
-  transition_rampup_med_sharp1      = 90,
-  transition_rampup_med_sharp2      = 91,
-  transition_rampup_short_sharp1    = 92,
-  transition_rampup_short_sharp2    = 93,
-  transition_rampdown_long_smooth1_50  = 94,
-  transition_rampdown_long_smooth2_50  = 95,
-  transition_rampdown_med_smooth1_50   = 96,
-  transition_rampdown_med_smooth2_50   = 97,
-  transition_rampdown_short_smooth1_50 = 98,
-  transition_rampdown_short_smooth2_50 = 99,
-  transition_rampdown_long_sharp1_50   = 100,
-  transition_rampdown_long_sharp2_50   = 101,
-  transition_rampdown_med_sharp1_50    = 102,
-  transition_rampdown_med_sharp2_50    = 103,
-  transition_rampdown_short_sharp1_50  = 104,
-  transition_rampdown_short_sharp2_50  = 105,
-  transition_rampup_long_smooth1_50    = 106,
-  transition_rampup_long_smooth2_50    = 107,
-  transition_rampup_med_smooth1_50     = 108,
-  transition_rampup_med_smooth2_50     = 109,
-  transition_rampup_short_smooth1_50   = 110,
-  transition_rampup_short_smooth2_50   = 111,
-  transition_rampup_long_sharp1_50     = 112,
-  transition_rampup_long_sharp2_50     = 113,
-  transition_rampup_med_sharp1_50      = 114,
-  transition_rampup_med_sharp2_50      = 115,
-  transition_rampup_short_sharp1_50    = 116,
-  transition_rampup_short_sharp2_50    = 117,
-  long_buzz_for_programmatic_stopping  = 118,
-  smooth_hum1_50 = 119,
-  smooth_hum2_40 = 120,
-  smooth_hum3_30 = 121,
-  smooth_hum4_20 = 122,
-  smooth_hum5_10 = 123,
-  drv_effect_max = 124,
+typedef enum DRV_EFFECT {
+    clear_sequence                       = 0,
+    strong_click                         = 1,
+    strong_click_60                      = 2,
+    strong_click_30                      = 3,
+    sharp_click                          = 4,
+    sharp_click_60                       = 5,
+    sharp_click_30                       = 6,
+    soft_bump                            = 7,
+    soft_bump_60                         = 8,
+    soft_bump_30                         = 9,
+    dbl_click                            = 10,
+    dbl_click_60                         = 11,
+    trp_click                            = 12,
+    soft_fuzz                            = 13,
+    strong_buzz                          = 14,
+    alert_750ms                          = 15,
+    alert_1000ms                         = 16,
+    strong_click1                        = 17,
+    strong_click2_80                     = 18,
+    strong_click3_60                     = 19,
+    strong_click4_30                     = 20,
+    medium_click1                        = 21,
+    medium_click2_80                     = 22,
+    medium_click3_60                     = 23,
+    sharp_tick1                          = 24,
+    sharp_tick2_80                       = 25,
+    sharp_tick3_60                       = 26,
+    sh_dblclick_str                      = 27,
+    sh_dblclick_str_80                   = 28,
+    sh_dblclick_str_60                   = 29,
+    sh_dblclick_str_30                   = 30,
+    sh_dblclick_med                      = 31,
+    sh_dblclick_med_80                   = 32,
+    sh_dblclick_med_60                   = 33,
+    sh_dblsharp_tick                     = 34,
+    sh_dblsharp_tick_80                  = 35,
+    sh_dblsharp_tick_60                  = 36,
+    lg_dblclick_str                      = 37,
+    lg_dblclick_str_80                   = 38,
+    lg_dblclick_str_60                   = 39,
+    lg_dblclick_str_30                   = 40,
+    lg_dblclick_med                      = 41,
+    lg_dblclick_med_80                   = 42,
+    lg_dblclick_med_60                   = 43,
+    lg_dblsharp_tick                     = 44,
+    lg_dblsharp_tick_80                  = 45,
+    lg_dblsharp_tick_60                  = 46,
+    buzz                                 = 47,
+    buzz_80                              = 48,
+    buzz_60                              = 49,
+    buzz_40                              = 50,
+    buzz_20                              = 51,
+    pulsing_strong                       = 52,
+    pulsing_strong_80                    = 53,
+    pulsing_medium                       = 54,
+    pulsing_medium_80                    = 55,
+    pulsing_sharp                        = 56,
+    pulsing_sharp_80                     = 57,
+    transition_click                     = 58,
+    transition_click_80                  = 59,
+    transition_click_60                  = 60,
+    transition_click_40                  = 61,
+    transition_click_20                  = 62,
+    transition_click_10                  = 63,
+    transition_hum                       = 64,
+    transition_hum_80                    = 65,
+    transition_hum_60                    = 66,
+    transition_hum_40                    = 67,
+    transition_hum_20                    = 68,
+    transition_hum_10                    = 69,
+    transition_rampdown_long_smooth1     = 70,
+    transition_rampdown_long_smooth2     = 71,
+    transition_rampdown_med_smooth1      = 72,
+    transition_rampdown_med_smooth2      = 73,
+    transition_rampdown_short_smooth1    = 74,
+    transition_rampdown_short_smooth2    = 75,
+    transition_rampdown_long_sharp1      = 76,
+    transition_rampdown_long_sharp2      = 77,
+    transition_rampdown_med_sharp1       = 78,
+    transition_rampdown_med_sharp2       = 79,
+    transition_rampdown_short_sharp1     = 80,
+    transition_rampdown_short_sharp2     = 81,
+    transition_rampup_long_smooth1       = 82,
+    transition_rampup_long_smooth2       = 83,
+    transition_rampup_med_smooth1        = 84,
+    transition_rampup_med_smooth2        = 85,
+    transition_rampup_short_smooth1      = 86,
+    transition_rampup_short_smooth2      = 87,
+    transition_rampup_long_sharp1        = 88,
+    transition_rampup_long_sharp2        = 89,
+    transition_rampup_med_sharp1         = 90,
+    transition_rampup_med_sharp2         = 91,
+    transition_rampup_short_sharp1       = 92,
+    transition_rampup_short_sharp2       = 93,
+    transition_rampdown_long_smooth1_50  = 94,
+    transition_rampdown_long_smooth2_50  = 95,
+    transition_rampdown_med_smooth1_50   = 96,
+    transition_rampdown_med_smooth2_50   = 97,
+    transition_rampdown_short_smooth1_50 = 98,
+    transition_rampdown_short_smooth2_50 = 99,
+    transition_rampdown_long_sharp1_50   = 100,
+    transition_rampdown_long_sharp2_50   = 101,
+    transition_rampdown_med_sharp1_50    = 102,
+    transition_rampdown_med_sharp2_50    = 103,
+    transition_rampdown_short_sharp1_50  = 104,
+    transition_rampdown_short_sharp2_50  = 105,
+    transition_rampup_long_smooth1_50    = 106,
+    transition_rampup_long_smooth2_50    = 107,
+    transition_rampup_med_smooth1_50     = 108,
+    transition_rampup_med_smooth2_50     = 109,
+    transition_rampup_short_smooth1_50   = 110,
+    transition_rampup_short_smooth2_50   = 111,
+    transition_rampup_long_sharp1_50     = 112,
+    transition_rampup_long_sharp2_50     = 113,
+    transition_rampup_med_sharp1_50      = 114,
+    transition_rampup_med_sharp2_50      = 115,
+    transition_rampup_short_sharp1_50    = 116,
+    transition_rampup_short_sharp2_50    = 117,
+    long_buzz_for_programmatic_stopping  = 118,
+    smooth_hum1_50                       = 119,
+    smooth_hum2_40                       = 120,
+    smooth_hum3_30                       = 121,
+    smooth_hum4_20                       = 122,
+    smooth_hum5_10                       = 123,
+    drv_effect_max                       = 124,
 } DRV_EFFECT;
 
 /* Register bit array unions */
 
 typedef union DRVREG_STATUS { /* register 0x00 */
-  uint8_t Byte;
-  struct {
-    uint8_t OC_DETECT   :1; /* set to 1 when overcurrent event is detected */
-    uint8_t OVER_TEMP   :1; /* set to 1 when device exceeds temp threshold */
-    uint8_t FB_STS      :1; /* set to 1 when feedback controller has timed out */
-    /* auto-calibration routine and diagnostic result
-     * result  |  auto-calibation  |      diagnostic       |
-     *   0     |      passed       | actuator func normal  |
-     *   1     |      failed       | actuator func fault*  |
-     * * actuator is not present or is shorted, timing out, or giving out–of-range back-EMF */
-    uint8_t DIAG_RESULT :1;
-    uint8_t             :1;
-    uint8_t DEVICE_ID   :3; /* Device IDs 3: DRV2605  4: DRV2604  5: DRV2604L  6: DRV2605L */
-  } Bits;
+    uint8_t Byte;
+    struct {
+        uint8_t OC_DETECT : 1; /* set to 1 when overcurrent event is detected */
+        uint8_t OVER_TEMP : 1; /* set to 1 when device exceeds temp threshold */
+        uint8_t FB_STS : 1;    /* set to 1 when feedback controller has timed out */
+        /* auto-calibration routine and diagnostic result
+         * result  |  auto-calibation  |      diagnostic       |
+         *   0     |      passed       | actuator func normal  |
+         *   1     |      failed       | actuator func fault*  |
+         * * actuator is not present or is shorted, timing out, or giving out–of-range back-EMF */
+        uint8_t DIAG_RESULT : 1;
+        uint8_t : 1;
+        uint8_t DEVICE_ID : 3; /* Device IDs 3: DRV2605  4: DRV2604  5: DRV2604L  6: DRV2605L */
+    } Bits;
 } DRVREG_STATUS;
 
 typedef union DRVREG_MODE { /* register 0x01 */
-  uint8_t Byte;
-  struct {
-    uint8_t MODE        :3; /* Mode setting */
-    uint8_t             :3;
-    uint8_t STANDBY     :1; /* 0:standby 1:ready */
-  } Bits;
+    uint8_t Byte;
+    struct {
+        uint8_t MODE : 3; /* Mode setting */
+        uint8_t : 3;
+        uint8_t STANDBY : 1; /* 0:standby 1:ready */
+    } Bits;
 } DRVREG_MODE;
 
 typedef union DRVREG_WAIT {
-  uint8_t Byte;
-  struct {
-    uint8_t WAIT_MODE   :1; /* Set to 1 to interpret as wait for next 7 bits x10ms */
-    uint8_t WAIT_TIME   :7;
-  } Bits;
+    uint8_t Byte;
+    struct {
+        uint8_t WAIT_MODE : 1; /* Set to 1 to interpret as wait for next 7 bits x10ms */
+        uint8_t WAIT_TIME : 7;
+    } Bits;
 } DRVREG_WAIT;
 
-typedef union DRVREG_FBR{ /* register 0x1A */
-  uint8_t Byte;
-  struct {
-    uint8_t BEMF_GAIN    :2;
-    uint8_t LOOP_GAIN    :2;
-    uint8_t BRAKE_FACTOR :3;
-    uint8_t ERM_LRA      :1;
-  } Bits;
+typedef union DRVREG_FBR { /* register 0x1A */
+    uint8_t Byte;
+    struct {
+        uint8_t BEMF_GAIN : 2;
+        uint8_t LOOP_GAIN : 2;
+        uint8_t BRAKE_FACTOR : 3;
+        uint8_t ERM_LRA : 1;
+    } Bits;
 } DRVREG_FBR;
 
-typedef union DRVREG_CTRL1{ /* register 0x1B */
-  uint8_t Byte;
-  struct {
-    uint8_t C1_DRIVE_TIME    :5;
-    uint8_t C1_AC_COUPLE     :1;
-    uint8_t                  :1;
-    uint8_t C1_STARTUP_BOOST :1;
-  } Bits;
+typedef union DRVREG_CTRL1 { /* register 0x1B */
+    uint8_t Byte;
+    struct {
+        uint8_t C1_DRIVE_TIME : 5;
+        uint8_t C1_AC_COUPLE : 1;
+        uint8_t : 1;
+        uint8_t C1_STARTUP_BOOST : 1;
+    } Bits;
 } DRVREG_CTRL1;
 
-typedef union DRVREG_CTRL2{ /* register 0x1C */
-  uint8_t Byte;
-  struct {
-    uint8_t C2_IDISS_TIME    :2;
-    uint8_t C2_BLANKING_TIME :2;
-    uint8_t C2_SAMPLE_TIME   :2;
-    uint8_t C2_BRAKE_STAB    :1;
-    uint8_t C2_BIDIR_INPUT   :1;
-  } Bits;
+typedef union DRVREG_CTRL2 { /* register 0x1C */
+    uint8_t Byte;
+    struct {
+        uint8_t C2_IDISS_TIME : 2;
+        uint8_t C2_BLANKING_TIME : 2;
+        uint8_t C2_SAMPLE_TIME : 2;
+        uint8_t C2_BRAKE_STAB : 1;
+        uint8_t C2_BIDIR_INPUT : 1;
+    } Bits;
 } DRVREG_CTRL2;
 
-typedef union DRVREG_CTRL3{ /* register 0x1D */
-  uint8_t Byte;
-  struct {
-    uint8_t C3_LRA_OPEN_LOOP   :1;
-    uint8_t C3_N_PWM_ANALOG    :1;
-    uint8_t C3_LRA_DRIVE_MODE  :1;
-    uint8_t C3_DATA_FORMAT_RTO :1;
-    uint8_t C3_SUPPLY_COMP_DIS :1;
-    uint8_t C3_ERM_OPEN_LOOP   :1;
-    uint8_t C3_NG_THRESH       :2;
-  } Bits;
+typedef union DRVREG_CTRL3 { /* register 0x1D */
+    uint8_t Byte;
+    struct {
+        uint8_t C3_LRA_OPEN_LOOP : 1;
+        uint8_t C3_N_PWM_ANALOG : 1;
+        uint8_t C3_LRA_DRIVE_MODE : 1;
+        uint8_t C3_DATA_FORMAT_RTO : 1;
+        uint8_t C3_SUPPLY_COMP_DIS : 1;
+        uint8_t C3_ERM_OPEN_LOOP : 1;
+        uint8_t C3_NG_THRESH : 2;
+    } Bits;
 } DRVREG_CTRL3;
 
-typedef union DRVREG_CTRL4{ /* register 0x1E */
-  uint8_t Byte;
-  struct {
-    uint8_t C4_OTP_PROGRAM     :1;
-    uint8_t                    :1;
-    uint8_t C4_OTP_STATUS      :1;
-    uint8_t                    :1;
-    uint8_t C4_AUTO_CAL_TIME   :2;
-    uint8_t C4_ZC_DET_TIME     :2;
-  } Bits;
+typedef union DRVREG_CTRL4 { /* register 0x1E */
+    uint8_t Byte;
+    struct {
+        uint8_t C4_OTP_PROGRAM : 1;
+        uint8_t : 1;
+        uint8_t C4_OTP_STATUS : 1;
+        uint8_t : 1;
+        uint8_t C4_AUTO_CAL_TIME : 2;
+        uint8_t C4_ZC_DET_TIME : 2;
+    } Bits;
 } DRVREG_CTRL4;
 
-typedef union DRVREG_CTRL5{ /* register 0x1F */
-  uint8_t Byte;
-  struct {
-    uint8_t C5_IDISS_TIME         :2;
-    uint8_t C5_BLANKING_TIME      :2;
-    uint8_t C5_PLAYBACK_INTERVAL  :1;
-    uint8_t C5_LRA_AUTO_OPEN_LOOP :1;
-    uint8_t C5_AUTO_OL_CNT        :2;
-  } Bits;
+typedef union DRVREG_CTRL5 { /* register 0x1F */
+    uint8_t Byte;
+    struct {
+        uint8_t C5_IDISS_TIME : 2;
+        uint8_t C5_BLANKING_TIME : 2;
+        uint8_t C5_PLAYBACK_INTERVAL : 1;
+        uint8_t C5_LRA_AUTO_OPEN_LOOP : 1;
+        uint8_t C5_AUTO_OL_CNT : 2;
+    } Bits;
 } DRVREG_CTRL5;

drivers/haptic/haptic.c

@@ -19,230 +19,248 @@
 #include "progmem.h"
 #include "debug.h"
 #ifdef DRV2605L
-#include "DRV2605L.h"
+#    include "DRV2605L.h"
 #endif
 #ifdef SOLENOID_ENABLE
-#include "solenoid.h"
+#    include "solenoid.h"
 #endif
 
 haptic_config_t haptic_config;
 
 void haptic_init(void) {
-  debug_enable = 1; //Debug is ON!
-  if (!eeconfig_is_enabled()) {
-  	eeconfig_init();
-  }
-  haptic_config.raw = eeconfig_read_haptic();
-  if (haptic_config.mode < 1){
-  haptic_config.mode = 1;
-  }
-  if (!haptic_config.mode){
-  dprintf("No haptic config found in eeprom, setting default configs\n");
-  haptic_reset();
-  }
-  #ifdef SOLENOID_ENABLE
+    debug_enable = 1;  // Debug is ON!
+    if (!eeconfig_is_enabled()) {
+        eeconfig_init();
+    }
+    haptic_config.raw = eeconfig_read_haptic();
+    if (haptic_config.mode < 1) {
+        haptic_config.mode = 1;
+    }
+    if (!haptic_config.mode) {
+        dprintf("No haptic config found in eeprom, setting default configs\n");
+        haptic_reset();
+    }
+#ifdef SOLENOID_ENABLE
     solenoid_setup();
     dprintf("Solenoid driver initialized\n");
-  #endif
-  #ifdef DRV2605L
+#endif
+#ifdef DRV2605L
     DRV_init();
     dprintf("DRV2605 driver initialized\n");
-  #endif
-  eeconfig_debug_haptic();
+#endif
+    eeconfig_debug_haptic();
 }
 
 void haptic_task(void) {
-  #ifdef SOLENOID_ENABLE
-  solenoid_check();
-  #endif
+#ifdef SOLENOID_ENABLE
+    solenoid_check();
+#endif
 }
 
 void eeconfig_debug_haptic(void) {
-  dprintf("haptic_config eprom\n");
-  dprintf("haptic_config.enable = %d\n", haptic_config.enable);
-  dprintf("haptic_config.mode = %d\n", haptic_config.mode);
+    dprintf("haptic_config eprom\n");
+    dprintf("haptic_config.enable = %d\n", haptic_config.enable);
+    dprintf("haptic_config.mode = %d\n", haptic_config.mode);
 }
 
 void haptic_enable(void) {
-  haptic_config.enable = 1;
-  xprintf("haptic_config.enable = %u\n", haptic_config.enable);
-  eeconfig_update_haptic(haptic_config.raw);
+    haptic_config.enable = 1;
+    xprintf("haptic_config.enable = %u\n", haptic_config.enable);
+    eeconfig_update_haptic(haptic_config.raw);
 }
 
 void haptic_disable(void) {
-  haptic_config.enable = 0;
-  xprintf("haptic_config.enable = %u\n", haptic_config.enable);
-  eeconfig_update_haptic(haptic_config.raw);
+    haptic_config.enable = 0;
+    xprintf("haptic_config.enable = %u\n", haptic_config.enable);
+    eeconfig_update_haptic(haptic_config.raw);
 }
 
 void haptic_toggle(void) {
-if (haptic_config.enable) {
-  haptic_disable();
-  } else {
-  haptic_enable();
-  }
-  eeconfig_update_haptic(haptic_config.raw);
+    if (haptic_config.enable) {
+        haptic_disable();
+    } else {
+        haptic_enable();
+    }
+    eeconfig_update_haptic(haptic_config.raw);
 }
 
-void haptic_feedback_toggle(void){
- haptic_config.feedback++;
-  if (haptic_config.feedback >= HAPTIC_FEEDBACK_MAX)
-  haptic_config.feedback = KEY_PRESS;
-  xprintf("haptic_config.feedback = %u\n", !haptic_config.feedback);
-  eeconfig_update_haptic(haptic_config.raw);
+void haptic_feedback_toggle(void) {
+    haptic_config.feedback++;
+    if (haptic_config.feedback >= HAPTIC_FEEDBACK_MAX) haptic_config.feedback = KEY_PRESS;
+    xprintf("haptic_config.feedback = %u\n", !haptic_config.feedback);
+    eeconfig_update_haptic(haptic_config.raw);
 }
 
 void haptic_buzz_toggle(void) {
-  bool buzz_stat = !haptic_config.buzz;
-  haptic_config.buzz = buzz_stat;
-  haptic_set_buzz(buzz_stat);
+    bool buzz_stat     = !haptic_config.buzz;
+    haptic_config.buzz = buzz_stat;
+    haptic_set_buzz(buzz_stat);
 }
 
 void haptic_mode_increase(void) {
-  uint8_t mode = haptic_config.mode + 1;
-  #ifdef DRV2605L
-  if (haptic_config.mode >= drv_effect_max) {
-    mode = 1;
-  }
-  #endif
+    uint8_t mode = haptic_config.mode + 1;
+#ifdef DRV2605L
+    if (haptic_config.mode >= drv_effect_max) {
+        mode = 1;
+    }
+#endif
     haptic_set_mode(mode);
 }
 
 void haptic_mode_decrease(void) {
-  uint8_t mode = haptic_config.mode -1;
-  #ifdef DRV2605L
-  if (haptic_config.mode < 1) {
-    mode = (drv_effect_max - 1);
-  }
-  #endif
-  haptic_set_mode(mode);
+    uint8_t mode = haptic_config.mode - 1;
+#ifdef DRV2605L
+    if (haptic_config.mode < 1) {
+        mode = (drv_effect_max - 1);
+    }
+#endif
+    haptic_set_mode(mode);
 }
 
 void haptic_dwell_increase(void) {
-  uint8_t dwell = haptic_config.dwell + 1;
-  #ifdef SOLENOID_ENABLE
-  if (haptic_config.dwell >= SOLENOID_MAX_DWELL) {
-    dwell = 1;
-  }
-  solenoid_set_dwell(dwell);
-  #endif
-  haptic_set_dwell(dwell);
+    uint8_t dwell = haptic_config.dwell + 1;
+#ifdef SOLENOID_ENABLE
+    if (haptic_config.dwell >= SOLENOID_MAX_DWELL) {
+        dwell = 1;
+    }
+    solenoid_set_dwell(dwell);
+#endif
+    haptic_set_dwell(dwell);
 }
 
 void haptic_dwell_decrease(void) {
-  uint8_t dwell = haptic_config.dwell -1;
-  #ifdef SOLENOID_ENABLE
-  if (haptic_config.dwell < SOLENOID_MIN_DWELL) {
-    dwell = SOLENOID_MAX_DWELL;
-  }
-  solenoid_set_dwell(dwell);
-  #endif
-  haptic_set_dwell(dwell);
-}
-
-void haptic_reset(void){
-  haptic_config.enable = true;
-  uint8_t feedback = HAPTIC_FEEDBACK_DEFAULT;
-  haptic_config.feedback = feedback;
-  #ifdef DRV2605L
-    uint8_t mode = HAPTIC_MODE_DEFAULT;
+    uint8_t dwell = haptic_config.dwell - 1;
+#ifdef SOLENOID_ENABLE
+    if (haptic_config.dwell < SOLENOID_MIN_DWELL) {
+        dwell = SOLENOID_MAX_DWELL;
+    }
+    solenoid_set_dwell(dwell);
+#endif
+    haptic_set_dwell(dwell);
+}
+
+void haptic_reset(void) {
+    haptic_config.enable   = true;
+    uint8_t feedback       = HAPTIC_FEEDBACK_DEFAULT;
+    haptic_config.feedback = feedback;
+#ifdef DRV2605L
+    uint8_t mode       = HAPTIC_MODE_DEFAULT;
     haptic_config.mode = mode;
-  #endif
-  #ifdef SOLENOID_ENABLE
-    uint8_t dwell = SOLENOID_DEFAULT_DWELL;
+#endif
+#ifdef SOLENOID_ENABLE
+    uint8_t dwell       = SOLENOID_DEFAULT_DWELL;
     haptic_config.dwell = dwell;
-  #endif
-  eeconfig_update_haptic(haptic_config.raw);
-  xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
-  xprintf("haptic_config.mode = %u\n", haptic_config.mode);
+#endif
+    eeconfig_update_haptic(haptic_config.raw);
+    xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
+    xprintf("haptic_config.mode = %u\n", haptic_config.mode);
 }
 
 void haptic_set_feedback(uint8_t feedback) {
-  haptic_config.feedback = feedback;
-  eeconfig_update_haptic(haptic_config.raw);
-  xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
+    haptic_config.feedback = feedback;
+    eeconfig_update_haptic(haptic_config.raw);
+    xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
 }
 
 void haptic_set_mode(uint8_t mode) {
-  haptic_config.mode = mode;
-  eeconfig_update_haptic(haptic_config.raw);
-  xprintf("haptic_config.mode = %u\n", haptic_config.mode);
+    haptic_config.mode = mode;
+    eeconfig_update_haptic(haptic_config.raw);
+    xprintf("haptic_config.mode = %u\n", haptic_config.mode);
 }
 
 void haptic_set_buzz(uint8_t buzz) {
-  haptic_config.buzz = buzz;
-  eeconfig_update_haptic(haptic_config.raw);
-  xprintf("haptic_config.buzz = %u\n", haptic_config.buzz);
+    haptic_config.buzz = buzz;
+    eeconfig_update_haptic(haptic_config.raw);
+    xprintf("haptic_config.buzz = %u\n", haptic_config.buzz);
 }
 
 void haptic_set_dwell(uint8_t dwell) {
-  haptic_config.dwell = dwell;
-  eeconfig_update_haptic(haptic_config.raw);
-  xprintf("haptic_config.dwell = %u\n", haptic_config.dwell);
+    haptic_config.dwell = dwell;
+    eeconfig_update_haptic(haptic_config.raw);
+    xprintf("haptic_config.dwell = %u\n", haptic_config.dwell);
 }
 
 uint8_t haptic_get_mode(void) {
-  if (!haptic_config.enable){
-    return false;
-  }
-  return haptic_config.mode;
+    if (!haptic_config.enable) {
+        return false;
+    }
+    return haptic_config.mode;
 }
 
 uint8_t haptic_get_feedback(void) {
-  if (!haptic_config.enable){
-    return false;
-  }
-  return haptic_config.feedback;
+    if (!haptic_config.enable) {
+        return false;
+    }
+    return haptic_config.feedback;
 }
 
 uint8_t haptic_get_dwell(void) {
-  if (!haptic_config.enable){
-    return false;
-  }
-  return haptic_config.dwell;
+    if (!haptic_config.enable) {
+        return false;
+    }
+    return haptic_config.dwell;
 }
 
 void haptic_play(void) {
-  #ifdef DRV2605L
-  uint8_t play_eff = 0;
-  play_eff = haptic_config.mode;
-  DRV_pulse(play_eff);
-  #endif
-  #ifdef SOLENOID_ENABLE
-  solenoid_fire();
-  #endif
+#ifdef DRV2605L
+    uint8_t play_eff = 0;
+    play_eff         = haptic_config.mode;
+    DRV_pulse(play_eff);
+#endif
+#ifdef SOLENOID_ENABLE
+    solenoid_fire();
+#endif
 }
 
 bool process_haptic(uint16_t keycode, keyrecord_t *record) {
-    if (keycode == HPT_ON && record->event.pressed) { haptic_enable(); }
-    if (keycode == HPT_OFF && record->event.pressed) { haptic_disable(); }
-    if (keycode == HPT_TOG && record->event.pressed) { haptic_toggle(); }
-    if (keycode == HPT_RST && record->event.pressed) { haptic_reset(); }
-    if (keycode == HPT_FBK && record->event.pressed) { haptic_feedback_toggle(); }
-    if (keycode == HPT_BUZ && record->event.pressed) { haptic_buzz_toggle(); }
-    if (keycode == HPT_MODI && record->event.pressed) { haptic_mode_increase(); }
-    if (keycode == HPT_MODD && record->event.pressed) { haptic_mode_decrease(); }
-    if (keycode == HPT_DWLI && record->event.pressed) { haptic_dwell_increase(); }
-    if (keycode == HPT_DWLD && record->event.pressed) { haptic_dwell_decrease(); }
-  if (haptic_config.enable) {
-    if ( record->event.pressed ) {
-	// keypress
-      if (haptic_config.feedback < 2) {
-      haptic_play();
-      }
-    } else {
-    //keyrelease
-      if (haptic_config.feedback > 0) {
-      haptic_play();
-      } 
+    if (keycode == HPT_ON && record->event.pressed) {
+        haptic_enable();
     }
-  }
-  return true;
+    if (keycode == HPT_OFF && record->event.pressed) {
+        haptic_disable();
+    }
+    if (keycode == HPT_TOG && record->event.pressed) {
+        haptic_toggle();
+    }
+    if (keycode == HPT_RST && record->event.pressed) {
+        haptic_reset();
+    }
+    if (keycode == HPT_FBK && record->event.pressed) {
+        haptic_feedback_toggle();
+    }
+    if (keycode == HPT_BUZ && record->event.pressed) {
+        haptic_buzz_toggle();
+    }
+    if (keycode == HPT_MODI && record->event.pressed) {
+        haptic_mode_increase();
+    }
+    if (keycode == HPT_MODD && record->event.pressed) {
+        haptic_mode_decrease();
+    }
+    if (keycode == HPT_DWLI && record->event.pressed) {
+        haptic_dwell_increase();
+    }
+    if (keycode == HPT_DWLD && record->event.pressed) {
+        haptic_dwell_decrease();
+    }
+    if (haptic_config.enable) {
+        if (record->event.pressed) {
+            // keypress
+            if (haptic_config.feedback < 2) {
+                haptic_play();
+            }
+        } else {
+            // keyrelease
+            if (haptic_config.feedback > 0) {
+                haptic_play();
+            }
+        }
+    }
+    return true;
 }
 
 void haptic_shutdown(void) {
-  #ifdef SOLENOID_ENABLE
-  solenoid_shutdown();
-  #endif
-
+#ifdef SOLENOID_ENABLE
+    solenoid_shutdown();
+#endif
 }

drivers/haptic/haptic.h

@@ -20,63 +20,57 @@
 #include <stdbool.h>
 #include "quantum.h"
 #ifdef DRV2605L
-#include "DRV2605L.h"
+#    include "DRV2605L.h"
 #endif
 
-
 #ifndef HAPTIC_FEEDBACK_DEFAULT
-#define HAPTIC_FEEDBACK_DEFAULT 0
+#    define HAPTIC_FEEDBACK_DEFAULT 0
 #endif
 #ifndef HAPTIC_MODE_DEFAULT
-#define HAPTIC_MODE_DEFAULT DRV_MODE_DEFAULT
+#    define HAPTIC_MODE_DEFAULT DRV_MODE_DEFAULT
 #endif
 
 /* EEPROM config settings */
 typedef union {
-  uint32_t raw;
-  struct {
-    bool     enable    :1;
-    uint8_t  feedback  :2;
-    uint8_t  mode      :7;
-    bool     buzz      :1;
-    uint8_t  dwell     :7;
-    uint16_t reserved  :16; 
-  };
+    uint32_t raw;
+    struct {
+        bool     enable : 1;
+        uint8_t  feedback : 2;
+        uint8_t  mode : 7;
+        bool     buzz : 1;
+        uint8_t  dwell : 7;
+        uint16_t reserved : 16;
+    };
 } haptic_config_t;
 
-typedef enum HAPTIC_FEEDBACK{
-  KEY_PRESS,
-  KEY_PRESS_RELEASE,
-  KEY_RELEASE,
-  HAPTIC_FEEDBACK_MAX,
+typedef enum HAPTIC_FEEDBACK {
+    KEY_PRESS,
+    KEY_PRESS_RELEASE,
+    KEY_RELEASE,
+    HAPTIC_FEEDBACK_MAX,
 } HAPTIC_FEEDBACK;
 
-bool process_haptic(uint16_t keycode, keyrecord_t *record);
-void haptic_init(void);
-void haptic_task(void);
-void eeconfig_debug_haptic(void);
-void haptic_enable(void);
-void haptic_disable(void);
-void haptic_toggle(void);
-void haptic_feedback_toggle(void);
-void haptic_mode_increase(void);
-void haptic_mode_decrease(void);
-void haptic_mode(uint8_t mode);
-void haptic_reset(void);
-void haptic_set_feedback(uint8_t feedback);
-void haptic_set_mode(uint8_t mode);
-void haptic_set_dwell(uint8_t dwell);
-void haptic_set_buzz(uint8_t buzz);
-void haptic_buzz_toggle(void);
+bool    process_haptic(uint16_t keycode, keyrecord_t *record);
+void    haptic_init(void);
+void    haptic_task(void);
+void    eeconfig_debug_haptic(void);
+void    haptic_enable(void);
+void    haptic_disable(void);
+void    haptic_toggle(void);
+void    haptic_feedback_toggle(void);
+void    haptic_mode_increase(void);
+void    haptic_mode_decrease(void);
+void    haptic_mode(uint8_t mode);
+void    haptic_reset(void);
+void    haptic_set_feedback(uint8_t feedback);
+void    haptic_set_mode(uint8_t mode);
+void    haptic_set_dwell(uint8_t dwell);
+void    haptic_set_buzz(uint8_t buzz);
+void    haptic_buzz_toggle(void);
 uint8_t haptic_get_mode(void);
 uint8_t haptic_get_feedback(void);
-void haptic_dwell_increase(void);
-void haptic_dwell_decrease(void);
+void    haptic_dwell_increase(void);
+void    haptic_dwell_decrease(void);
 
 void haptic_play(void);
 void haptic_shutdown(void);
-
-
-
-
-

drivers/haptic/solenoid.c

@@ -19,91 +19,77 @@
 #include "solenoid.h"
 #include "haptic.h"
 
-bool solenoid_on = false;
-bool solenoid_buzzing = false;
-uint16_t solenoid_start = 0;
-uint8_t solenoid_dwell = SOLENOID_DEFAULT_DWELL;
+bool     solenoid_on      = false;
+bool     solenoid_buzzing = false;
+uint16_t solenoid_start   = 0;
+uint8_t  solenoid_dwell   = SOLENOID_DEFAULT_DWELL;
 
 extern haptic_config_t haptic_config;
 
+void solenoid_buzz_on(void) { haptic_set_buzz(1); }
 
-void solenoid_buzz_on(void) {
-  haptic_set_buzz(1);
-}
-
-void solenoid_buzz_off(void) {
-  haptic_set_buzz(0);
-}
-
-void solenoid_set_buzz(int buzz) {
-  haptic_set_buzz(buzz);
-}
+void solenoid_buzz_off(void) { haptic_set_buzz(0); }
 
+void solenoid_set_buzz(int buzz) { haptic_set_buzz(buzz); }
 
 void solenoid_dwell_minus(uint8_t solenoid_dwell) {
-  if (solenoid_dwell > 0) solenoid_dwell--;
+    if (solenoid_dwell > 0) solenoid_dwell--;
 }
 
 void solenoid_dwell_plus(uint8_t solenoid_dwell) {
-  if (solenoid_dwell < SOLENOID_MAX_DWELL) solenoid_dwell++;
+    if (solenoid_dwell < SOLENOID_MAX_DWELL) solenoid_dwell++;
 }
 
-void solenoid_set_dwell(uint8_t dwell) {
-  solenoid_dwell = dwell;
-}
+void solenoid_set_dwell(uint8_t dwell) { solenoid_dwell = dwell; }
 
 void solenoid_stop(void) {
-  writePinLow(SOLENOID_PIN);
-  solenoid_on = false;
-  solenoid_buzzing = false;
+    writePinLow(SOLENOID_PIN);
+    solenoid_on      = false;
+    solenoid_buzzing = false;
 }
 
 void solenoid_fire(void) {
-  if (!haptic_config.buzz && solenoid_on) return;
-  if (haptic_config.buzz && solenoid_buzzing) return;
+    if (!haptic_config.buzz && solenoid_on) return;
+    if (haptic_config.buzz && solenoid_buzzing) return;
 
-  solenoid_on = true;
-  solenoid_buzzing = true;
-  solenoid_start = timer_read();
-  writePinHigh(SOLENOID_PIN);
+    solenoid_on      = true;
+    solenoid_buzzing = true;
+    solenoid_start   = timer_read();
+    writePinHigh(SOLENOID_PIN);
 }
 
 void solenoid_check(void) {
-  uint16_t elapsed = 0;
-
-  if (!solenoid_on) return;
+    uint16_t elapsed = 0;
 
-  elapsed = timer_elapsed(solenoid_start);
+    if (!solenoid_on) return;
 
-  //Check if it's time to finish this solenoid click cycle
-  if (elapsed > solenoid_dwell) {
-    solenoid_stop();
-    return;
-  }
+    elapsed = timer_elapsed(solenoid_start);
 
-  //Check whether to buzz the solenoid on and off
-  if (haptic_config.buzz) {
-    if (elapsed / SOLENOID_MIN_DWELL % 2 == 0){
-      if (!solenoid_buzzing) {
-        solenoid_buzzing = true;
-        writePinHigh(SOLENOID_PIN);
-      }
+    // Check if it's time to finish this solenoid click cycle
+    if (elapsed > solenoid_dwell) {
+        solenoid_stop();
+        return;
     }
-    else {
-      if (solenoid_buzzing) {
-        solenoid_buzzing = false;
-        writePinLow(SOLENOID_PIN);
-      }
+
+    // Check whether to buzz the solenoid on and off
+    if (haptic_config.buzz) {
+        if (elapsed / SOLENOID_MIN_DWELL % 2 == 0) {
+            if (!solenoid_buzzing) {
+                solenoid_buzzing = true;
+                writePinHigh(SOLENOID_PIN);
+            }
+        } else {
+            if (solenoid_buzzing) {
+                solenoid_buzzing = false;
+                writePinLow(SOLENOID_PIN);
+            }
+        }
     }
-  }
 }
 
 void solenoid_setup(void) {
-  setPinOutput(SOLENOID_PIN);
-  solenoid_fire();
+    setPinOutput(SOLENOID_PIN);
+    solenoid_fire();
 }
 
-void solenoid_shutdown(void) {
-  writePinLow(SOLENOID_PIN);
-
-}
+void solenoid_shutdown(void) { writePinLow(SOLENOID_PIN); }

drivers/haptic/solenoid.h

@@ -18,23 +18,23 @@
 #pragma once
 
 #ifndef SOLENOID_DEFAULT_DWELL
-#define SOLENOID_DEFAULT_DWELL 12
+#    define SOLENOID_DEFAULT_DWELL 12
 #endif
 
 #ifndef SOLENOID_MAX_DWELL
-#define SOLENOID_MAX_DWELL 100
+#    define SOLENOID_MAX_DWELL 100
 #endif
 
 #ifndef SOLENOID_MIN_DWELL
-#define SOLENOID_MIN_DWELL 4
+#    define SOLENOID_MIN_DWELL 4
 #endif
 
 #ifndef SOLENOID_ACTIVE
-#define SOLENOID_ACTIVE false
+#    define SOLENOID_ACTIVE false
 #endif
 
 #ifndef SOLENOID_PIN
-#define SOLENOID_PIN F6
+#    define SOLENOID_PIN F6
 #endif
 
 void solenoid_buzz_on(void);

drivers/issi/is31fl3218.c

@@ -35,68 +35,62 @@ uint8_t g_twi_transfer_buffer[20];
 // IS31FL3218 has 18 PWM outputs and a fixed I2C address, so no chaining.
 // If used as RGB LED driver, LEDs are assigned RGB,RGB,RGB,RGB,RGB,RGB
 uint8_t g_pwm_buffer[18];
-bool g_pwm_buffer_update_required = false;
+bool    g_pwm_buffer_update_required = false;
 
-void IS31FL3218_write_register( uint8_t reg, uint8_t data )
-{
-	g_twi_transfer_buffer[0] = reg;
-	g_twi_transfer_buffer[1] = data;
-	i2c_transmit( ISSI_ADDRESS, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+void IS31FL3218_write_register(uint8_t reg, uint8_t data) {
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+    i2c_transmit(ISSI_ADDRESS, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
 }
 
-void IS31FL3218_write_pwm_buffer( uint8_t *pwm_buffer )
-{
-	g_twi_transfer_buffer[0] = ISSI_REG_PWM;
-	for ( int i=0; i<18; i++ ) {
-		g_twi_transfer_buffer[1+i] = pwm_buffer[i];
-	}
-	
-	i2c_transmit( ISSI_ADDRESS, g_twi_transfer_buffer, 19, ISSI_TIMEOUT);
+void IS31FL3218_write_pwm_buffer(uint8_t *pwm_buffer) {
+    g_twi_transfer_buffer[0] = ISSI_REG_PWM;
+    for (int i = 0; i < 18; i++) {
+        g_twi_transfer_buffer[1 + i] = pwm_buffer[i];
+    }
+
+    i2c_transmit(ISSI_ADDRESS, g_twi_transfer_buffer, 19, ISSI_TIMEOUT);
 }
 
-void IS31FL3218_init(void)
-{
-	// In case we ever want to reinitialize (?)
-	IS31FL3218_write_register( ISSI_REG_RESET, 0x00 );
-	
-	// Turn off software shutdown
-	IS31FL3218_write_register( ISSI_REG_SHUTDOWN, 0x01 );
-
-	// Set all PWM values to zero
-	for ( uint8_t i = 0; i < 18; i++ ) {
-		IS31FL3218_write_register( ISSI_REG_PWM+i, 0x00 );
-	}
-	
-	// Enable all channels
-	for ( uint8_t i = 0; i < 3; i++ ) {
-		IS31FL3218_write_register( ISSI_REG_CONTROL+i, 0b00111111 );
-	}
-	
-	// Load PWM registers and LED Control register data
-	IS31FL3218_write_register( ISSI_REG_UPDATE, 0x01 );
+void IS31FL3218_init(void) {
+    // In case we ever want to reinitialize (?)
+    IS31FL3218_write_register(ISSI_REG_RESET, 0x00);
+
+    // Turn off software shutdown
+    IS31FL3218_write_register(ISSI_REG_SHUTDOWN, 0x01);
+
+    // Set all PWM values to zero
+    for (uint8_t i = 0; i < 18; i++) {
+        IS31FL3218_write_register(ISSI_REG_PWM + i, 0x00);
+    }
+
+    // Enable all channels
+    for (uint8_t i = 0; i < 3; i++) {
+        IS31FL3218_write_register(ISSI_REG_CONTROL + i, 0b00111111);
+    }
+
+    // Load PWM registers and LED Control register data
+    IS31FL3218_write_register(ISSI_REG_UPDATE, 0x01);
 }
 
-void IS31FL3218_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-	g_pwm_buffer[index * 3 + 0] = red;
-	g_pwm_buffer[index * 3 + 1] = green;
-	g_pwm_buffer[index * 3 + 2] = blue;
-	g_pwm_buffer_update_required = true;
+void IS31FL3218_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    g_pwm_buffer[index * 3 + 0]  = red;
+    g_pwm_buffer[index * 3 + 1]  = green;
+    g_pwm_buffer[index * 3 + 2]  = blue;
+    g_pwm_buffer_update_required = true;
 }
 
-void IS31FL3218_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-	for ( int i = 0; i < 6; i++ ) {
-		IS31FL3218_set_color( i, red, green, blue );
-	}
+void IS31FL3218_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (int i = 0; i < 6; i++) {
+        IS31FL3218_set_color(i, red, green, blue);
+    }
 }
 
-void IS31FL3218_update_pwm_buffers(void)
-{
-	if ( g_pwm_buffer_update_required ) {
-		IS31FL3218_write_pwm_buffer( g_pwm_buffer );
-		// Load PWM registers and LED Control register data
-		IS31FL3218_write_register( ISSI_REG_UPDATE, 0x01 );
-	}
-	g_pwm_buffer_update_required = false;
+void IS31FL3218_update_pwm_buffers(void) {
+    if (g_pwm_buffer_update_required) {
+        IS31FL3218_write_pwm_buffer(g_pwm_buffer);
+        // Load PWM registers and LED Control register data
+        IS31FL3218_write_register(ISSI_REG_UPDATE, 0x01);
+    }
+    g_pwm_buffer_update_required = false;
 }

drivers/issi/is31fl3218.h

@@ -19,6 +19,6 @@
 #include <stdbool.h>
 
 void IS31FL3218_init(void);
-void IS31FL3218_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31FL3218_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3218_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3218_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
 void IS31FL3218_update_pwm_buffers(void);

drivers/issi/is31fl3731-simple.c

@@ -17,11 +17,11 @@
  */
 
 #ifdef __AVR__
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+#    include <avr/interrupt.h>
+#    include <avr/io.h>
+#    include <util/delay.h>
 #else
-#include "wait.h"
+#    include "wait.h"
 #endif
 
 #include <stdint.h>
@@ -41,7 +41,7 @@
 // 0b1110110 AD <-> SDA
 #define ISSI_ADDR_DEFAULT 0x74
 
-#define ISSI_REG_CONFIG  0x00
+#define ISSI_REG_CONFIG 0x00
 #define ISSI_REG_CONFIG_PICTUREMODE 0x00
 #define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
 #define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
@@ -50,20 +50,20 @@
 #define ISSI_CONF_AUTOFRAMEMODE 0x04
 #define ISSI_CONF_AUDIOMODE 0x08
 
-#define ISSI_REG_PICTUREFRAME  0x01
+#define ISSI_REG_PICTUREFRAME 0x01
 
 #define ISSI_REG_SHUTDOWN 0x0A
 #define ISSI_REG_AUDIOSYNC 0x06
 
 #define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+#define ISSI_BANK_FUNCTIONREG 0x0B  // helpfully called 'page nine'
 
 #ifndef ISSI_TIMEOUT
-  #define ISSI_TIMEOUT 100
+#    define ISSI_TIMEOUT 100
 #endif
 
 #ifndef ISSI_PERSISTENCE
-  #define ISSI_PERSISTENCE 0
+#    define ISSI_PERSISTENCE 0
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -75,17 +75,17 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[LED_DRIVER_COUNT][144];
-bool g_pwm_buffer_update_required = false;
+bool    g_pwm_buffer_update_required = false;
 
 /* There's probably a better way to init this... */
 #if LED_DRIVER_COUNT == 1
-    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}};
+uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}};
 #elif LED_DRIVER_COUNT == 2
-    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}};
+uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}};
 #elif LED_DRIVER_COUNT == 3
-    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}};
+uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}};
 #elif LED_DRIVER_COUNT == 4
-    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}, {0}};
+uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}, {0}};
 #endif
 bool g_led_control_registers_update_required = false;
 
@@ -103,20 +103,19 @@ bool g_led_control_registers_update_required = false;
 // 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
 // 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
 
-
 void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-    #if ISSI_PERSISTENCE > 0
-        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
-              break;
-            }
+#if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
+            break;
         }
-    #else
-        i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
-    #endif
+    }
+#else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+#endif
 }
 
 void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
@@ -136,14 +135,13 @@ void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
             g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
-    #if ISSI_PERSISTENCE > 0
-      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
-          break;
-      }
-    #else
-      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
-    #endif
+#if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+        }
+#else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+#endif
     }
 }
 
@@ -196,7 +194,6 @@ void IS31FL3731_init(uint8_t addr) {
     // most usage after initialization is just writing PWM buffers in bank 0
     // as there's not much point in double-buffering
     IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
-
 }
 
 void IS31FL3731_set_value(int index, uint8_t value) {
@@ -205,7 +202,7 @@ void IS31FL3731_set_value(int index, uint8_t value) {
 
         // Subtract 0x24 to get the second index of g_pwm_buffer
         g_pwm_buffer[led.driver][led.v - 0x24] = value;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required           = true;
     }
 }
 
@@ -216,10 +213,10 @@ void IS31FL3731_set_value_all(uint8_t value) {
 }
 
 void IS31FL3731_set_led_control_register(uint8_t index, bool value) {
-  is31_led led = g_is31_leds[index];
+    is31_led led = g_is31_leds[index];
 
-  uint8_t control_register = (led.v - 0x24) / 8;
-  uint8_t bit_value = (led.v - 0x24) % 8;
+    uint8_t control_register = (led.v - 0x24) / 8;
+    uint8_t bit_value        = (led.v - 0x24) % 8;
 
     if (value) {
         g_led_control_registers[led.driver][control_register] |= (1 << bit_value);
@@ -239,7 +236,7 @@ void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index) {
 
 void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index) {
     if (g_led_control_registers_update_required) {
-        for (int i=0; i<18; i++) {
+        for (int i = 0; i < 18; i++) {
             IS31FL3731_write_register(addr, i, g_led_control_registers[index][i]);
         }
     }

drivers/issi/is31fl3731-simple.h

@@ -16,14 +16,12 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #ifndef IS31FL3731_DRIVER_H
 #define IS31FL3731_DRIVER_H
 
-
 typedef struct is31_led {
-  uint8_t driver:2;
-  uint8_t v;
+    uint8_t driver : 2;
+    uint8_t v;
 } __attribute__((packed)) is31_led;
 
 extern const is31_led g_is31_leds[LED_DRIVER_LED_COUNT];
@@ -44,16 +42,16 @@ void IS31FL3731_set_led_control_register(uint8_t index, bool value);
 void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index);
 void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 
-#define C1_1  0x24
-#define C1_2  0x25
-#define C1_3  0x26
-#define C1_4  0x27
-#define C1_5  0x28
-#define C1_6  0x29
-#define C1_7  0x2A
-#define C1_8  0x2B
+#define C1_1 0x24
+#define C1_2 0x25
+#define C1_3 0x26
+#define C1_4 0x27
+#define C1_5 0x28
+#define C1_6 0x29
+#define C1_7 0x2A
+#define C1_8 0x2B
 
-#define C1_9  0x2C
+#define C1_9 0x2C
 #define C1_10 0x2D
 #define C1_11 0x2E
 #define C1_12 0x2F
@@ -62,16 +60,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C1_15 0x32
 #define C1_16 0x33
 
-#define C2_1  0x34
-#define C2_2  0x35
-#define C2_3  0x36
-#define C2_4  0x37
-#define C2_5  0x38
-#define C2_6  0x39
-#define C2_7  0x3A
-#define C2_8  0x3B
+#define C2_1 0x34
+#define C2_2 0x35
+#define C2_3 0x36
+#define C2_4 0x37
+#define C2_5 0x38
+#define C2_6 0x39
+#define C2_7 0x3A
+#define C2_8 0x3B
 
-#define C2_9  0x3C
+#define C2_9 0x3C
 #define C2_10 0x3D
 #define C2_11 0x3E
 #define C2_12 0x3F
@@ -80,16 +78,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C2_15 0x42
 #define C2_16 0x43
 
-#define C3_1  0x44
-#define C3_2  0x45
-#define C3_3  0x46
-#define C3_4  0x47
-#define C3_5  0x48
-#define C3_6  0x49
-#define C3_7  0x4A
-#define C3_8  0x4B
+#define C3_1 0x44
+#define C3_2 0x45
+#define C3_3 0x46
+#define C3_4 0x47
+#define C3_5 0x48
+#define C3_6 0x49
+#define C3_7 0x4A
+#define C3_8 0x4B
 
-#define C3_9  0x4C
+#define C3_9 0x4C
 #define C3_10 0x4D
 #define C3_11 0x4E
 #define C3_12 0x4F
@@ -98,16 +96,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C3_15 0x52
 #define C3_16 0x53
 
-#define C4_1  0x54
-#define C4_2  0x55
-#define C4_3  0x56
-#define C4_4  0x57
-#define C4_5  0x58
-#define C4_6  0x59
-#define C4_7  0x5A
-#define C4_8  0x5B
+#define C4_1 0x54
+#define C4_2 0x55
+#define C4_3 0x56
+#define C4_4 0x57
+#define C4_5 0x58
+#define C4_6 0x59
+#define C4_7 0x5A
+#define C4_8 0x5B
 
-#define C4_9  0x5C
+#define C4_9 0x5C
 #define C4_10 0x5D
 #define C4_11 0x5E
 #define C4_12 0x5F
@@ -116,16 +114,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C4_15 0x62
 #define C4_16 0x63
 
-#define C5_1  0x64
-#define C5_2  0x65
-#define C5_3  0x66
-#define C5_4  0x67
-#define C5_5  0x68
-#define C5_6  0x69
-#define C5_7  0x6A
-#define C5_8  0x6B
+#define C5_1 0x64
+#define C5_2 0x65
+#define C5_3 0x66
+#define C5_4 0x67
+#define C5_5 0x68
+#define C5_6 0x69
+#define C5_7 0x6A
+#define C5_8 0x6B
 
-#define C5_9  0x6C
+#define C5_9 0x6C
 #define C5_10 0x6D
 #define C5_11 0x6E
 #define C5_12 0x6F
@@ -134,16 +132,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C5_15 0x72
 #define C5_16 0x73
 
-#define C6_1  0x74
-#define C6_2  0x75
-#define C6_3  0x76
-#define C6_4  0x77
-#define C6_5  0x78
-#define C6_6  0x79
-#define C6_7  0x7A
-#define C6_8  0x7B
+#define C6_1 0x74
+#define C6_2 0x75
+#define C6_3 0x76
+#define C6_4 0x77
+#define C6_5 0x78
+#define C6_6 0x79
+#define C6_7 0x7A
+#define C6_8 0x7B
 
-#define C6_9  0x7C
+#define C6_9 0x7C
 #define C6_10 0x7D
 #define C6_11 0x7E
 #define C6_12 0x7F
@@ -152,16 +150,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C6_15 0x82
 #define C6_16 0x83
 
-#define C7_1  0x84
-#define C7_2  0x85
-#define C7_3  0x86
-#define C7_4  0x87
-#define C7_5  0x88
-#define C7_6  0x89
-#define C7_7  0x8A
-#define C7_8  0x8B
+#define C7_1 0x84
+#define C7_2 0x85
+#define C7_3 0x86
+#define C7_4 0x87
+#define C7_5 0x88
+#define C7_6 0x89
+#define C7_7 0x8A
+#define C7_8 0x8B
 
-#define C7_9  0x8C
+#define C7_9 0x8C
 #define C7_10 0x8D
 #define C7_11 0x8E
 #define C7_12 0x8F
@@ -170,16 +168,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C7_15 0x92
 #define C7_16 0x93
 
-#define C8_1  0x94
-#define C8_2  0x95
-#define C8_3  0x96
-#define C8_4  0x97
-#define C8_5  0x98
-#define C8_6  0x99
-#define C8_7  0x9A
-#define C8_8  0x9B
+#define C8_1 0x94
+#define C8_2 0x95
+#define C8_3 0x96
+#define C8_4 0x97
+#define C8_5 0x98
+#define C8_6 0x99
+#define C8_7 0x9A
+#define C8_8 0x9B
 
-#define C8_9  0x9C
+#define C8_9 0x9C
 #define C8_10 0x9D
 #define C8_11 0x9E
 #define C8_12 0x9F
@@ -188,16 +186,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C8_15 0xA2
 #define C8_16 0xA3
 
-#define C9_1  0xA4
-#define C9_2  0xA5
-#define C9_3  0xA6
-#define C9_4  0xA7
-#define C9_5  0xA8
-#define C9_6  0xA9
-#define C9_7  0xAA
-#define C9_8  0xAB
+#define C9_1 0xA4
+#define C9_2 0xA5
+#define C9_3 0xA6
+#define C9_4 0xA7
+#define C9_5 0xA8
+#define C9_6 0xA9
+#define C9_7 0xAA
+#define C9_8 0xAB
 
-#define C9_9  0xAC
+#define C9_9 0xAC
 #define C9_10 0xAD
 #define C9_11 0xAE
 #define C9_12 0xAF
@@ -206,5 +204,4 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C9_15 0xB2
 #define C9_16 0xB3
 
-
-#endif // IS31FL3731_DRIVER_H
+#endif  // IS31FL3731_DRIVER_H

drivers/issi/is31fl3731.c

@@ -16,11 +16,11 @@
  */
 
 #ifdef __AVR__
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+#    include <avr/interrupt.h>
+#    include <avr/io.h>
+#    include <util/delay.h>
 #else
-#include "wait.h"
+#    include "wait.h"
 #endif
 
 #include "is31fl3731.h"
@@ -37,7 +37,7 @@
 // 0b1110110 AD <-> SDA
 #define ISSI_ADDR_DEFAULT 0x74
 
-#define ISSI_REG_CONFIG  0x00
+#define ISSI_REG_CONFIG 0x00
 #define ISSI_REG_CONFIG_PICTUREMODE 0x00
 #define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
 #define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
@@ -46,20 +46,20 @@
 #define ISSI_CONF_AUTOFRAMEMODE 0x04
 #define ISSI_CONF_AUDIOMODE 0x08
 
-#define ISSI_REG_PICTUREFRAME  0x01
+#define ISSI_REG_PICTUREFRAME 0x01
 
 #define ISSI_REG_SHUTDOWN 0x0A
 #define ISSI_REG_AUDIOSYNC 0x06
 
 #define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+#define ISSI_BANK_FUNCTIONREG 0x0B  // helpfully called 'page nine'
 
 #ifndef ISSI_TIMEOUT
-  #define ISSI_TIMEOUT 100
+#    define ISSI_TIMEOUT 100
 #endif
 
 #ifndef ISSI_PERSISTENCE
-  #define ISSI_PERSISTENCE 0
+#    define ISSI_PERSISTENCE 0
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -71,10 +71,10 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][144];
-bool g_pwm_buffer_update_required = false;
+bool    g_pwm_buffer_update_required = false;
 
-uint8_t g_led_control_registers[DRIVER_COUNT][18] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required = false;
+uint8_t g_led_control_registers[DRIVER_COUNT][18] = {{0}, {0}};
+bool    g_led_control_registers_update_required   = false;
 
 // This is the bit pattern in the LED control registers
 // (for matrix A, add one to register for matrix B)
@@ -90,181 +90,161 @@ bool g_led_control_registers_update_required = false;
 // 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
 // 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
 
-
-void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
-{
+void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-  #if ISSI_PERSISTENCE > 0
+#if ISSI_PERSISTENCE > 0
     for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
-        break;
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
     }
-  #else
+#else
     i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
-  #endif
+#endif
 }
 
-void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
-{
+void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes bank is already selected
 
     // transmit PWM registers in 9 transfers of 16 bytes
     // g_twi_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
-    for ( int i = 0; i < 144; i += 16 ) {
+    for (int i = 0; i < 144; i += 16) {
         // set the first register, e.g. 0x24, 0x34, 0x44, etc.
         g_twi_transfer_buffer[0] = 0x24 + i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
-        for ( int j = 0; j < 16; j++ ) {
+        for (int j = 0; j < 16; j++) {
             g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
-    #if ISSI_PERSISTENCE > 0
-      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
-          break;
-      }
-    #else
-      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
-    #endif
+#if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+        }
+#else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+#endif
     }
 }
 
-void IS31FL3731_init( uint8_t addr )
-{
+void IS31FL3731_init(uint8_t addr) {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, first enable software shutdown,
     // then set up the mode and other settings, clear the PWM registers,
     // then disable software shutdown.
 
     // select "function register" bank
-    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
 
     // enable software shutdown
-    IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
-    // this delay was copied from other drivers, might not be needed
-    #ifdef __AVR__
-    _delay_ms( 10 );
-    #else
+    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
+// this delay was copied from other drivers, might not be needed
+#ifdef __AVR__
+    _delay_ms(10);
+#else
     wait_ms(10);
-    #endif
+#endif
 
     // picture mode
-    IS31FL3731_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
+    IS31FL3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
     // display frame 0
-    IS31FL3731_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
+    IS31FL3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
     // audio sync off
-    IS31FL3731_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
+    IS31FL3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
 
     // select bank 0
-    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
 
     // turn off all LEDs in the LED control register
-    for ( int i = 0x00; i <= 0x11; i++ )
-    {
-        IS31FL3731_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0x11; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
     }
 
     // turn off all LEDs in the blink control register (not really needed)
-    for ( int i = 0x12; i <= 0x23; i++ )
-    {
-        IS31FL3731_write_register( addr, i, 0x00 );
+    for (int i = 0x12; i <= 0x23; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
     }
 
     // set PWM on all LEDs to 0
-    for ( int i = 0x24; i <= 0xB3; i++ )
-    {
-        IS31FL3731_write_register( addr, i, 0x00 );
+    for (int i = 0x24; i <= 0xB3; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
     }
 
     // select "function register" bank
-    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
 
     // disable software shutdown
-    IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
+    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
 
     // select bank 0 and leave it selected.
     // most usage after initialization is just writing PWM buffers in bank 0
     // as there's not much point in double-buffering
-    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
-
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
 }
 
-void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+void IS31FL3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    if (index >= 0 && index < DRIVER_LED_TOTAL) {
         is31_led led = g_is31_leds[index];
 
         // Subtract 0x24 to get the second index of g_pwm_buffer
         g_pwm_buffer[led.driver][led.r - 0x24] = red;
         g_pwm_buffer[led.driver][led.g - 0x24] = green;
         g_pwm_buffer[led.driver][led.b - 0x24] = blue;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required           = true;
     }
 }
 
-void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
-    {
-        IS31FL3731_set_color( i, red, green, blue );
+void IS31FL3731_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        IS31FL3731_set_color(i, red, green, blue);
     }
 }
 
-void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
-{
+void IS31FL3731_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
     is31_led led = g_is31_leds[index];
 
-  uint8_t control_register_r = (led.r - 0x24) / 8;
-  uint8_t control_register_g = (led.g - 0x24) / 8;
-  uint8_t control_register_b = (led.b - 0x24) / 8;
-  uint8_t bit_r = (led.r - 0x24) % 8;
-  uint8_t bit_g = (led.g - 0x24) % 8;
-  uint8_t bit_b = (led.b - 0x24) % 8;
+    uint8_t control_register_r = (led.r - 0x24) / 8;
+    uint8_t control_register_g = (led.g - 0x24) / 8;
+    uint8_t control_register_b = (led.b - 0x24) / 8;
+    uint8_t bit_r              = (led.r - 0x24) % 8;
+    uint8_t bit_g              = (led.g - 0x24) % 8;
+    uint8_t bit_b              = (led.b - 0x24) % 8;
 
-    if ( red ) {
+    if (red) {
         g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
     } else {
         g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
     }
-    if ( green ) {
+    if (green) {
         g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
     } else {
         g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
     }
-    if ( blue ) {
+    if (blue) {
         g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
     } else {
         g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
     }
 
     g_led_control_registers_update_required = true;
-
 }
 
-void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
-{
-    if ( g_pwm_buffer_update_required )
-    {
-        IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] );
-        IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+void IS31FL3731_update_pwm_buffers(uint8_t addr1, uint8_t addr2) {
+    if (g_pwm_buffer_update_required) {
+        IS31FL3731_write_pwm_buffer(addr1, g_pwm_buffer[0]);
+        IS31FL3731_write_pwm_buffer(addr2, g_pwm_buffer[1]);
     }
     g_pwm_buffer_update_required = false;
 }
 
-void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
-{
-    if ( g_led_control_registers_update_required )
-    {
-        for ( int i=0; i<18; i++ )
-        {
-            IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] );
-            IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] );
+void IS31FL3731_update_led_control_registers(uint8_t addr1, uint8_t addr2) {
+    if (g_led_control_registers_update_required) {
+        for (int i = 0; i < 18; i++) {
+            IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i]);
+            IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i]);
         }
     }
 }

drivers/issi/is31fl3731.h

@@ -15,7 +15,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #ifndef IS31FL3731_DRIVER_H
 #define IS31FL3731_DRIVER_H
 
@@ -23,40 +22,40 @@
 #include <stdbool.h>
 
 typedef struct is31_led {
-  uint8_t driver:2;
-  uint8_t r;
-  uint8_t g;
-  uint8_t b;
+    uint8_t driver : 2;
+    uint8_t r;
+    uint8_t g;
+    uint8_t b;
 } __attribute__((packed)) is31_led;
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 
-void IS31FL3731_init( uint8_t addr );
-void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data );
-void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+void IS31FL3731_init(uint8_t addr);
+void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
 
-void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3731_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
 
-void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+void IS31FL3731_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
 
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
-void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
-
-#define C1_1  0x24
-#define C1_2  0x25
-#define C1_3  0x26
-#define C1_4  0x27
-#define C1_5  0x28
-#define C1_6  0x29
-#define C1_7  0x2A
-#define C1_8  0x2B
-
-#define C1_9  0x2C
+void IS31FL3731_update_pwm_buffers(uint8_t addr1, uint8_t addr2);
+void IS31FL3731_update_led_control_registers(uint8_t addr1, uint8_t addr2);
+
+#define C1_1 0x24
+#define C1_2 0x25
+#define C1_3 0x26
+#define C1_4 0x27
+#define C1_5 0x28
+#define C1_6 0x29
+#define C1_7 0x2A
+#define C1_8 0x2B
+
+#define C1_9 0x2C
 #define C1_10 0x2D
 #define C1_11 0x2E
 #define C1_12 0x2F
@@ -65,16 +64,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 #define C1_15 0x32
 #define C1_16 0x33
 
-#define C2_1  0x34
-#define C2_2  0x35
-#define C2_3  0x36
-#define C2_4  0x37
-#define C2_5  0x38
-#define C2_6  0x39
-#define C2_7  0x3A
-#define C2_8  0x3B
+#define C2_1 0x34
+#define C2_2 0x35
+#define C2_3 0x36
+#define C2_4 0x37
+#define C2_5 0x38
+#define C2_6 0x39
+#define C2_7 0x3A
+#define C2_8 0x3B
 
-#define C2_9  0x3C
+#define C2_9 0x3C
 #define C2_10 0x3D
 #define C2_11 0x3E
 #define C2_12 0x3F
@@ -83,16 +82,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 #define C2_15 0x42
 #define C2_16 0x43
 
-#define C3_1  0x44
-#define C3_2  0x45
-#define C3_3  0x46
-#define C3_4  0x47
-#define C3_5  0x48
-#define C3_6  0x49
-#define C3_7  0x4A
-#define C3_8  0x4B
+#define C3_1 0x44
+#define C3_2 0x45
+#define C3_3 0x46
+#define C3_4 0x47
+#define C3_5 0x48
+#define C3_6 0x49
+#define C3_7 0x4A
+#define C3_8 0x4B
 
-#define C3_9  0x4C
+#define C3_9 0x4C
 #define C3_10 0x4D
 #define C3_11 0x4E
 #define C3_12 0x4F
@@ -101,16 +100,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 #define C3_15 0x52
 #define C3_16 0x53
 
-#define C4_1  0x54
-#define C4_2  0x55
-#define C4_3  0x56
-#define C4_4  0x57
-#define C4_5  0x58
-#define C4_6  0x59
-#define C4_7  0x5A
-#define C4_8  0x5B
+#define C4_1 0x54
+#define C4_2 0x55
+#define C4_3 0x56
+#define C4_4 0x57
+#define C4_5 0x58
+#define C4_6 0x59
+#define C4_7 0x5A
+#define C4_8 0x5B
 
-#define C4_9  0x5C
+#define C4_9 0x5C
 #define C4_10 0x5D
 #define C4_11 0x5E
 #define C4_12 0x5F
@@ -119,16 +118,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 #define C4_15 0x62
 #define C4_16 0x63
 
-#define C5_1  0x64
-#define C5_2  0x65
-#define C5_3  0x66
-#define C5_4  0x67
-#define C5_5  0x68
-#define C5_6  0x69
-#define C5_7  0x6A
-#define C5_8  0x6B
+#define C5_1 0x64
+#define C5_2 0x65
+#define C5_3 0x66
+#define C5_4 0x67
+#define C5_5 0x68
+#define C5_6 0x69
+#define C5_7 0x6A
+#define C5_8 0x6B
 
-#define C5_9  0x6C
+#define C5_9 0x6C
 #define C5_10 0x6D
 #define C5_11 0x6E
 #define C5_12 0x6F
@@ -137,16 +136,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 #define C5_15 0x72
 #define C5_16 0x73
 
-#define C6_1  0x74
-#define C6_2  0x75
-#define C6_3  0x76
-#define C6_4  0x77
-#define C6_5  0x78
-#define C6_6  0x79
-#define C6_7  0x7A
-#define C6_8  0x7B
+#define C6_1 0x74
+#define C6_2 0x75
+#define C6_3 0x76
+#define C6_4 0x77
+#define C6_5 0x78
+#define C6_6 0x79
+#define C6_7 0x7A
+#define C6_8 0x7B
 
-#define C6_9  0x7C
+#define C6_9 0x7C
 #define C6_10 0x7D
 #define C6_11 0x7E
 #define C6_12 0x7F
@@ -155,16 +154,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 #define C6_15 0x82
 #define C6_16 0x83
 
-#define C7_1  0x84
-#define C7_2  0x85
-#define C7_3  0x86
-#define C7_4  0x87
-#define C7_5  0x88
-#define C7_6  0x89
-#define C7_7  0x8A
-#define C7_8  0x8B
+#define C7_1 0x84
+#define C7_2 0x85
+#define C7_3 0x86
+#define C7_4 0x87
+#define C7_5 0x88
+#define C7_6 0x89
+#define C7_7 0x8A
+#define C7_8 0x8B
 
-#define C7_9  0x8C
+#define C7_9 0x8C
 #define C7_10 0x8D
 #define C7_11 0x8E
 #define C7_12 0x8F
@@ -173,16 +172,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 #define C7_15 0x92
 #define C7_16 0x93
 
-#define C8_1  0x94
-#define C8_2  0x95
-#define C8_3  0x96
-#define C8_4  0x97
-#define C8_5  0x98
-#define C8_6  0x99
-#define C8_7  0x9A
-#define C8_8  0x9B
+#define C8_1 0x94
+#define C8_2 0x95
+#define C8_3 0x96
+#define C8_4 0x97
+#define C8_5 0x98
+#define C8_6 0x99
+#define C8_7 0x9A
+#define C8_8 0x9B
 
-#define C8_9  0x9C
+#define C8_9 0x9C
 #define C8_10 0x9D
 #define C8_11 0x9E
 #define C8_12 0x9F
@@ -191,16 +190,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 #define C8_15 0xA2
 #define C8_16 0xA3
 
-#define C9_1  0xA4
-#define C9_2  0xA5
-#define C9_3  0xA6
-#define C9_4  0xA7
-#define C9_5  0xA8
-#define C9_6  0xA9
-#define C9_7  0xAA
-#define C9_8  0xAB
+#define C9_1 0xA4
+#define C9_2 0xA5
+#define C9_3 0xA6
+#define C9_4 0xA7
+#define C9_5 0xA8
+#define C9_6 0xA9
+#define C9_7 0xAA
+#define C9_8 0xAB
 
-#define C9_9  0xAC
+#define C9_9 0xAC
 #define C9_10 0xAD
 #define C9_11 0xAE
 #define C9_12 0xAF
@@ -209,6 +208,4 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 #define C9_15 0xB2
 #define C9_16 0xB3
 
-
-
-#endif // IS31FL3731_DRIVER_H
+#endif  // IS31FL3731_DRIVER_H

drivers/issi/is31fl3733.c

@@ -17,11 +17,11 @@
  */
 
 #ifdef __AVR__
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+#    include <avr/interrupt.h>
+#    include <avr/io.h>
+#    include <util/delay.h>
 #else
-#include "wait.h"
+#    include "wait.h"
 #endif
 
 #include "is31fl3733.h"
@@ -46,23 +46,23 @@
 #define ISSI_INTERRUPTMASKREGISTER 0xF0
 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1
 
-#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
-#define ISSI_PAGE_PWM 0x01        //PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
-#define ISSI_PAGE_FUNCTION 0x03   //PG3
+#define ISSI_PAGE_LEDCONTROL 0x00  // PG0
+#define ISSI_PAGE_PWM 0x01         // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02  // PG2
+#define ISSI_PAGE_FUNCTION 0x03    // PG3
 
-#define ISSI_REG_CONFIGURATION 0x00 //PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
-#define ISSI_REG_RESET 0x11// PG3
-#define ISSI_REG_SWPULLUP 0x0F //PG3
-#define ISSI_REG_CSPULLUP 0x10 //PG3
+#define ISSI_REG_CONFIGURATION 0x00  // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01  // PG3
+#define ISSI_REG_RESET 0x11          // PG3
+#define ISSI_REG_SWPULLUP 0x0F       // PG3
+#define ISSI_REG_CSPULLUP 0x10       // PG3
 
 #ifndef ISSI_TIMEOUT
-  #define ISSI_TIMEOUT 100
+#    define ISSI_TIMEOUT 100
 #endif
 
 #ifndef ISSI_PERSISTENCE
-  #define ISSI_PERSISTENCE 0
+#    define ISSI_PERSISTENCE 0
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -75,56 +75,51 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required[DRIVER_COUNT] = { false };
+bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
 
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required[DRIVER_COUNT] = { false };
+uint8_t g_led_control_registers[DRIVER_COUNT][24]             = {{0}, {0}};
+bool    g_led_control_registers_update_required[DRIVER_COUNT] = {false};
 
-void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data )
-{
+void IS31FL3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-  #if ISSI_PERSISTENCE > 0
+#if ISSI_PERSISTENCE > 0
     for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
-        break;
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
     }
-  #else
+#else
     i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
-  #endif
+#endif
 }
 
-void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
-{
+void IS31FL3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes PG1 is already selected
 
     // transmit PWM registers in 12 transfers of 16 bytes
     // g_twi_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
-    for ( int i = 0; i < 192; i += 16 ) {
+    for (int i = 0; i < 192; i += 16) {
         g_twi_transfer_buffer[0] = i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
-        for ( int j = 0; j < 16; j++ ) {
+        for (int j = 0; j < 16; j++) {
             g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
-    #if ISSI_PERSISTENCE > 0
-      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
-          break;
-      }
-    #else
-      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
-    #endif
+#if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+        }
+#else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+#endif
     }
 }
 
-void IS31FL3733_init( uint8_t addr, uint8_t sync)
-{
+void IS31FL3733_init(uint8_t addr, uint8_t sync) {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, shutdown is enabled last.
     // Set up the mode and other settings, clear the PWM registers,
@@ -132,120 +127,108 @@ void IS31FL3733_init( uint8_t addr, uint8_t sync)
     // Sync is passed so set it according to the datasheet.
 
     // Unlock the command register.
-    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG0
-    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
     // Turn off all LEDs.
-    for ( int i = 0x00; i <= 0x17; i++ )
-    {
-        IS31FL3733_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0x17; i++) {
+        IS31FL3733_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG1
-    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
     // Set PWM on all LEDs to 0
     // No need to setup Breath registers to PWM as that is the default.
-    for ( int i = 0x00; i <= 0xBF; i++ )
-    {
-        IS31FL3733_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0xBF; i++) {
+        IS31FL3733_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG3
-    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
     // Set global current to maximum.
-    IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    IS31FL3733_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF);
     // Disable software shutdown.
-    IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01 );
+    IS31FL3733_write_register(addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01);
 
-    // Wait 10ms to ensure the device has woken up.
-    #ifdef __AVR__
-    _delay_ms( 10 );
-    #else
+// Wait 10ms to ensure the device has woken up.
+#ifdef __AVR__
+    _delay_ms(10);
+#else
     wait_ms(10);
-    #endif
+#endif
 }
 
-void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    if (index >= 0 && index < DRIVER_LED_TOTAL) {
         is31_led led = g_is31_leds[index];
 
-        g_pwm_buffer[led.driver][led.r] = red;
-        g_pwm_buffer[led.driver][led.g] = green;
-        g_pwm_buffer[led.driver][led.b] = blue;
+        g_pwm_buffer[led.driver][led.r]          = red;
+        g_pwm_buffer[led.driver][led.g]          = green;
+        g_pwm_buffer[led.driver][led.b]          = blue;
         g_pwm_buffer_update_required[led.driver] = true;
     }
 }
 
-void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
-    {
-        IS31FL3733_set_color( i, red, green, blue );
+void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        IS31FL3733_set_color(i, red, green, blue);
     }
 }
 
-void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
-{
+void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
     is31_led led = g_is31_leds[index];
 
-  uint8_t control_register_r = led.r / 8;
-  uint8_t control_register_g = led.g / 8;
-  uint8_t control_register_b = led.b / 8;
-  uint8_t bit_r = led.r % 8;
-  uint8_t bit_g = led.g % 8;
-  uint8_t bit_b = led.b % 8;
+    uint8_t control_register_r = led.r / 8;
+    uint8_t control_register_g = led.g / 8;
+    uint8_t control_register_b = led.b / 8;
+    uint8_t bit_r              = led.r % 8;
+    uint8_t bit_g              = led.g % 8;
+    uint8_t bit_b              = led.b % 8;
 
-    if ( red ) {
+    if (red) {
         g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
     } else {
         g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
     }
-    if ( green ) {
+    if (green) {
         g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
     } else {
         g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
     }
-    if ( blue ) {
+    if (blue) {
         g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
     } else {
         g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
     }
 
     g_led_control_registers_update_required[led.driver] = true;
-
 }
 
-void IS31FL3733_update_pwm_buffers( uint8_t addr, uint8_t index )
-{
-    if ( g_pwm_buffer_update_required[index] )
-    {
+void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
+    if (g_pwm_buffer_update_required[index]) {
         // Firstly we need to unlock the command register and select PG1
-        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+        IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
 
-        IS31FL3733_write_pwm_buffer( addr, g_pwm_buffer[index] );
+        IS31FL3733_write_pwm_buffer(addr, g_pwm_buffer[index]);
     }
     g_pwm_buffer_update_required[index] = false;
 }
 
-void IS31FL3733_update_led_control_registers( uint8_t addr, uint8_t index )
-{
-    if ( g_led_control_registers_update_required[index] )
-    {
+void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index) {
+    if (g_led_control_registers_update_required[index]) {
         // Firstly we need to unlock the command register and select PG0
-        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
-        for ( int i=0; i<24; i++ )
-        {
-            IS31FL3733_write_register(addr, i, g_led_control_registers[index][i] );
+        IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+        for (int i = 0; i < 24; i++) {
+            IS31FL3733_write_register(addr, i, g_led_control_registers[index][i]);
         }
     }
     g_led_control_registers_update_required[index] = false;

drivers/issi/is31fl3733.h

@@ -16,7 +16,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #ifndef IS31FL3733_DRIVER_H
 #define IS31FL3733_DRIVER_H
 
@@ -24,232 +23,232 @@
 #include <stdbool.h>
 
 typedef struct is31_led {
-  uint8_t driver:2;
-  uint8_t r;
-  uint8_t g;
-  uint8_t b;
+    uint8_t driver : 2;
+    uint8_t r;
+    uint8_t g;
+    uint8_t b;
 } __attribute__((packed)) is31_led;
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 
-void IS31FL3733_init( uint8_t addr, uint8_t sync );
-void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data );
-void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+void IS31FL3733_init(uint8_t addr, uint8_t sync);
+void IS31FL3733_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
 
-void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
 
-void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
 
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3733_update_pwm_buffers( uint8_t addr, uint8_t index );
-void IS31FL3733_update_led_control_registers( uint8_t addr, uint8_t index );
-
-#define A_1  0x00
-#define A_2  0x01
-#define A_3  0x02
-#define A_4  0x03
-#define A_5  0x04
-#define A_6  0x05
-#define A_7  0x06
-#define A_8  0x07
-#define A_9  0x08
-#define A_10  0x09
-#define A_11  0x0A
-#define A_12  0x0B
-#define A_13  0x0C
-#define A_14  0x0D
-#define A_15  0x0E
-#define A_16  0x0F
-
-#define B_1  0x10
-#define B_2  0x11
-#define B_3  0x12
-#define B_4  0x13
-#define B_5  0x14
-#define B_6  0x15
-#define B_7  0x16
-#define B_8  0x17
-#define B_9  0x18
-#define B_10  0x19
-#define B_11  0x1A
-#define B_12  0x1B
-#define B_13  0x1C
-#define B_14  0x1D
-#define B_15  0x1E
-#define B_16  0x1F
-
-#define C_1  0x20
-#define C_2  0x21
-#define C_3  0x22
-#define C_4  0x23
-#define C_5  0x24
-#define C_6  0x25
-#define C_7  0x26
-#define C_8  0x27
-#define C_9  0x28
-#define C_10  0x29
-#define C_11  0x2A
-#define C_12  0x2B
-#define C_13  0x2C
-#define C_14  0x2D
-#define C_15  0x2E
-#define C_16  0x2F
-
-#define D_1  0x30
-#define D_2  0x31
-#define D_3  0x32
-#define D_4  0x33
-#define D_5  0x34
-#define D_6  0x35
-#define D_7  0x36
-#define D_8  0x37
-#define D_9  0x38
-#define D_10  0x39
-#define D_11  0x3A
-#define D_12  0x3B
-#define D_13  0x3C
-#define D_14  0x3D
-#define D_15  0x3E
-#define D_16  0x3F
-
-#define E_1  0x40
-#define E_2  0x41
-#define E_3  0x42
-#define E_4  0x43
-#define E_5  0x44
-#define E_6  0x45
-#define E_7  0x46
-#define E_8  0x47
-#define E_9  0x48
-#define E_10  0x49
-#define E_11  0x4A
-#define E_12  0x4B
-#define E_13  0x4C
-#define E_14  0x4D
-#define E_15  0x4E
-#define E_16  0x4F
-
-#define F_1  0x50
-#define F_2  0x51
-#define F_3  0x52
-#define F_4  0x53
-#define F_5  0x54
-#define F_6  0x55
-#define F_7  0x56
-#define F_8  0x57
-#define F_9  0x58
-#define F_10  0x59
-#define F_11  0x5A
-#define F_12  0x5B
-#define F_13  0x5C
-#define F_14  0x5D
-#define F_15  0x5E
-#define F_16  0x5F
-
-#define G_1  0x60
-#define G_2  0x61
-#define G_3  0x62
-#define G_4  0x63
-#define G_5  0x64
-#define G_6  0x65
-#define G_7  0x66
-#define G_8  0x67
-#define G_9  0x68
-#define G_10  0x69
-#define G_11  0x6A
-#define G_12  0x6B
-#define G_13  0x6C
-#define G_14  0x6D
-#define G_15  0x6E
-#define G_16  0x6F
-
-#define H_1  0x70
-#define H_2  0x71
-#define H_3  0x72
-#define H_4  0x73
-#define H_5  0x74
-#define H_6  0x75
-#define H_7  0x76
-#define H_8  0x77
-#define H_9  0x78
-#define H_10  0x79
-#define H_11  0x7A
-#define H_12  0x7B
-#define H_13  0x7C
-#define H_14  0x7D
-#define H_15  0x7E
-#define H_16  0x7F
-
-#define I_1  0x80
-#define I_2  0x81
-#define I_3  0x82
-#define I_4  0x83
-#define I_5  0x84
-#define I_6  0x85
-#define I_7  0x86
-#define I_8  0x87
-#define I_9  0x88
-#define I_10  0x89
-#define I_11  0x8A
-#define I_12  0x8B
-#define I_13  0x8C
-#define I_14  0x8D
-#define I_15  0x8E
-#define I_16  0x8F
-
-#define J_1  0x90
-#define J_2  0x91
-#define J_3  0x92
-#define J_4  0x93
-#define J_5  0x94
-#define J_6  0x95
-#define J_7  0x96
-#define J_8  0x97
-#define J_9  0x98
-#define J_10  0x99
-#define J_11  0x9A
-#define J_12  0x9B
-#define J_13  0x9C
-#define J_14  0x9D
-#define J_15  0x9E
-#define J_16  0x9F
-
-#define K_1  0xA0
-#define K_2  0xA1
-#define K_3  0xA2
-#define K_4  0xA3
-#define K_5  0xA4
-#define K_6  0xA5
-#define K_7  0xA6
-#define K_8  0xA7
-#define K_9  0xA8
-#define K_10  0xA9
-#define K_11  0xAA
-#define K_12  0xAB
-#define K_13  0xAC
-#define K_14  0xAD
-#define K_15  0xAE
-#define K_16  0xAF
-
-#define L_1  0xB0
-#define L_2  0xB1
-#define L_3  0xB2
-#define L_4  0xB3
-#define L_5  0xB4
-#define L_6  0xB5
-#define L_7  0xB6
-#define L_8  0xB7
-#define L_9  0xB8
-#define L_10  0xB9
-#define L_11  0xBA
-#define L_12  0xBB
-#define L_13  0xBC
-#define L_14  0xBD
-#define L_15  0xBE
-#define L_16  0xBF
-
-#endif // IS31FL3733_DRIVER_H
+void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index);
+void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index);
+
+#define A_1 0x00
+#define A_2 0x01
+#define A_3 0x02
+#define A_4 0x03
+#define A_5 0x04
+#define A_6 0x05
+#define A_7 0x06
+#define A_8 0x07
+#define A_9 0x08
+#define A_10 0x09
+#define A_11 0x0A
+#define A_12 0x0B
+#define A_13 0x0C
+#define A_14 0x0D
+#define A_15 0x0E
+#define A_16 0x0F
+
+#define B_1 0x10
+#define B_2 0x11
+#define B_3 0x12
+#define B_4 0x13
+#define B_5 0x14
+#define B_6 0x15
+#define B_7 0x16
+#define B_8 0x17
+#define B_9 0x18
+#define B_10 0x19
+#define B_11 0x1A
+#define B_12 0x1B
+#define B_13 0x1C
+#define B_14 0x1D
+#define B_15 0x1E
+#define B_16 0x1F
+
+#define C_1 0x20
+#define C_2 0x21
+#define C_3 0x22
+#define C_4 0x23
+#define C_5 0x24
+#define C_6 0x25
+#define C_7 0x26
+#define C_8 0x27
+#define C_9 0x28
+#define C_10 0x29
+#define C_11 0x2A
+#define C_12 0x2B
+#define C_13 0x2C
+#define C_14 0x2D
+#define C_15 0x2E
+#define C_16 0x2F
+
+#define D_1 0x30
+#define D_2 0x31
+#define D_3 0x32
+#define D_4 0x33
+#define D_5 0x34
+#define D_6 0x35
+#define D_7 0x36
+#define D_8 0x37
+#define D_9 0x38
+#define D_10 0x39
+#define D_11 0x3A
+#define D_12 0x3B
+#define D_13 0x3C
+#define D_14 0x3D
+#define D_15 0x3E
+#define D_16 0x3F
+
+#define E_1 0x40
+#define E_2 0x41
+#define E_3 0x42
+#define E_4 0x43
+#define E_5 0x44
+#define E_6 0x45
+#define E_7 0x46
+#define E_8 0x47
+#define E_9 0x48
+#define E_10 0x49
+#define E_11 0x4A
+#define E_12 0x4B
+#define E_13 0x4C
+#define E_14 0x4D
+#define E_15 0x4E
+#define E_16 0x4F
+
+#define F_1 0x50
+#define F_2 0x51
+#define F_3 0x52
+#define F_4 0x53
+#define F_5 0x54
+#define F_6 0x55
+#define F_7 0x56
+#define F_8 0x57
+#define F_9 0x58
+#define F_10 0x59
+#define F_11 0x5A
+#define F_12 0x5B
+#define F_13 0x5C
+#define F_14 0x5D
+#define F_15 0x5E
+#define F_16 0x5F
+
+#define G_1 0x60
+#define G_2 0x61
+#define G_3 0x62
+#define G_4 0x63
+#define G_5 0x64
+#define G_6 0x65
+#define G_7 0x66
+#define G_8 0x67
+#define G_9 0x68
+#define G_10 0x69
+#define G_11 0x6A
+#define G_12 0x6B
+#define G_13 0x6C
+#define G_14 0x6D
+#define G_15 0x6E
+#define G_16 0x6F
+
+#define H_1 0x70
+#define H_2 0x71
+#define H_3 0x72
+#define H_4 0x73
+#define H_5 0x74
+#define H_6 0x75
+#define H_7 0x76
+#define H_8 0x77
+#define H_9 0x78
+#define H_10 0x79
+#define H_11 0x7A
+#define H_12 0x7B
+#define H_13 0x7C
+#define H_14 0x7D
+#define H_15 0x7E
+#define H_16 0x7F
+
+#define I_1 0x80
+#define I_2 0x81
+#define I_3 0x82
+#define I_4 0x83
+#define I_5 0x84
+#define I_6 0x85
+#define I_7 0x86
+#define I_8 0x87
+#define I_9 0x88
+#define I_10 0x89
+#define I_11 0x8A
+#define I_12 0x8B
+#define I_13 0x8C
+#define I_14 0x8D
+#define I_15 0x8E
+#define I_16 0x8F
+
+#define J_1 0x90
+#define J_2 0x91
+#define J_3 0x92
+#define J_4 0x93
+#define J_5 0x94
+#define J_6 0x95
+#define J_7 0x96
+#define J_8 0x97
+#define J_9 0x98
+#define J_10 0x99
+#define J_11 0x9A
+#define J_12 0x9B
+#define J_13 0x9C
+#define J_14 0x9D
+#define J_15 0x9E
+#define J_16 0x9F
+
+#define K_1 0xA0
+#define K_2 0xA1
+#define K_3 0xA2
+#define K_4 0xA3
+#define K_5 0xA4
+#define K_6 0xA5
+#define K_7 0xA6
+#define K_8 0xA7
+#define K_9 0xA8
+#define K_10 0xA9
+#define K_11 0xAA
+#define K_12 0xAB
+#define K_13 0xAC
+#define K_14 0xAD
+#define K_15 0xAE
+#define K_16 0xAF
+
+#define L_1 0xB0
+#define L_2 0xB1
+#define L_3 0xB2
+#define L_4 0xB3
+#define L_5 0xB4
+#define L_6 0xB5
+#define L_7 0xB6
+#define L_8 0xB7
+#define L_9 0xB8
+#define L_10 0xB9
+#define L_11 0xBA
+#define L_12 0xBB
+#define L_13 0xBC
+#define L_14 0xBD
+#define L_15 0xBE
+#define L_16 0xBF
+
+#endif  // IS31FL3733_DRIVER_H

drivers/issi/is31fl3736.c

@@ -14,13 +14,12 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #ifdef __AVR__
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+#    include <avr/interrupt.h>
+#    include <avr/io.h>
+#    include <util/delay.h>
 #else
-#include "wait.h"
+#    include "wait.h"
 #endif
 
 #include "is31fl3736.h"
@@ -28,8 +27,6 @@
 #include "i2c_master.h"
 #include "progmem.h"
 
-
-
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
 // The address will vary depending on your wiring:
@@ -47,23 +44,23 @@
 #define ISSI_INTERRUPTMASKREGISTER 0xF0
 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1
 
-#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
-#define ISSI_PAGE_PWM 0x01        //PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
-#define ISSI_PAGE_FUNCTION 0x03   //PG3
+#define ISSI_PAGE_LEDCONTROL 0x00  // PG0
+#define ISSI_PAGE_PWM 0x01         // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02  // PG2
+#define ISSI_PAGE_FUNCTION 0x03    // PG3
 
-#define ISSI_REG_CONFIGURATION 0x00 //PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
-#define ISSI_REG_RESET 0x11// PG3
-#define ISSI_REG_SWPULLUP 0x0F //PG3
-#define ISSI_REG_CSPULLUP 0x10 //PG3
+#define ISSI_REG_CONFIGURATION 0x00  // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01  // PG3
+#define ISSI_REG_RESET 0x11          // PG3
+#define ISSI_REG_SWPULLUP 0x0F       // PG3
+#define ISSI_REG_CSPULLUP 0x10       // PG3
 
 #ifndef ISSI_TIMEOUT
-  #define ISSI_TIMEOUT 100
+#    define ISSI_TIMEOUT 100
 #endif
 
 #ifndef ISSI_PERSISTENCE
-  #define ISSI_PERSISTENCE 0
+#    define ISSI_PERSISTENCE 0
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -76,124 +73,113 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3736_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required = false;
+bool    g_pwm_buffer_update_required = false;
 
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required = false;
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = {{0}, {0}};
+bool    g_led_control_registers_update_required   = false;
 
-void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data )
-{
+void IS31FL3736_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-  #if ISSI_PERSISTENCE > 0
+#if ISSI_PERSISTENCE > 0
     for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
-        break;
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
     }
-  #else
+#else
     i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
-  #endif
+#endif
 }
 
-void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
-{
+void IS31FL3736_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes PG1 is already selected
 
     // transmit PWM registers in 12 transfers of 16 bytes
     // g_twi_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
-    for ( int i = 0; i < 192; i += 16 ) {
+    for (int i = 0; i < 192; i += 16) {
         g_twi_transfer_buffer[0] = i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
-        for ( int j = 0; j < 16; j++ ) {
+        for (int j = 0; j < 16; j++) {
             g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
-    #if ISSI_PERSISTENCE > 0
-      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
-          break;
-      }
-    #else
-      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
-    #endif
+#if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+        }
+#else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+#endif
     }
 }
 
-void IS31FL3736_init( uint8_t addr )
-{
+void IS31FL3736_init(uint8_t addr) {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, shutdown is enabled last.
     // Set up the mode and other settings, clear the PWM registers,
     // then disable software shutdown.
 
     // Unlock the command register.
-    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG0
-    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
     // Turn off all LEDs.
-    for ( int i = 0x00; i <= 0x17; i++ )
-    {
-        IS31FL3736_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0x17; i++) {
+        IS31FL3736_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG1
-    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
     // Set PWM on all LEDs to 0
     // No need to setup Breath registers to PWM as that is the default.
-    for ( int i = 0x00; i <= 0xBF; i++ )
-    {
-        IS31FL3736_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0xBF; i++) {
+        IS31FL3736_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG3
-    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
     // Set global current to maximum.
-    IS31FL3736_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    IS31FL3736_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF);
     // Disable software shutdown.
-    IS31FL3736_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+    IS31FL3736_write_register(addr, ISSI_REG_CONFIGURATION, 0x01);
 
-    // Wait 10ms to ensure the device has woken up.
-    #ifdef __AVR__
-    _delay_ms( 10 );
-    #else
+// Wait 10ms to ensure the device has woken up.
+#ifdef __AVR__
+    _delay_ms(10);
+#else
     wait_ms(10);
-    #endif
+#endif
 }
 
-void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+void IS31FL3736_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    if (index >= 0 && index < DRIVER_LED_TOTAL) {
         is31_led led = g_is31_leds[index];
 
         g_pwm_buffer[led.driver][led.r] = red;
         g_pwm_buffer[led.driver][led.g] = green;
         g_pwm_buffer[led.driver][led.b] = blue;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required    = true;
     }
 }
 
-void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
-    {
-        IS31FL3736_set_color( i, red, green, blue );
+void IS31FL3736_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        IS31FL3736_set_color(i, red, green, blue);
     }
 }
 
-void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
-{
+void IS31FL3736_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
     is31_led led = g_is31_leds[index];
 
     // IS31FL3733
@@ -209,64 +195,59 @@ void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, b
     // A1-A4=0x00 A5-A8=0x01
     // So, the same math applies.
 
-	uint8_t control_register_r = led.r / 8;
-	uint8_t control_register_g = led.g / 8;
-	uint8_t control_register_b = led.b / 8;
+    uint8_t control_register_r = led.r / 8;
+    uint8_t control_register_g = led.g / 8;
+    uint8_t control_register_b = led.b / 8;
 
-	uint8_t bit_r = led.r % 8;
-	uint8_t bit_g = led.g % 8;
-	uint8_t bit_b = led.b % 8;
+    uint8_t bit_r = led.r % 8;
+    uint8_t bit_g = led.g % 8;
+    uint8_t bit_b = led.b % 8;
 
-    if ( red ) {
+    if (red) {
         g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
     } else {
         g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
     }
-    if ( green ) {
+    if (green) {
         g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
     } else {
         g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
     }
-    if ( blue ) {
+    if (blue) {
         g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
     } else {
         g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
     }
 
     g_led_control_registers_update_required = true;
-
 }
 
-void IS31FL3736_mono_set_brightness( int index, uint8_t value )
-{
-    if ( index >= 0 && index < 96 ) {
-    	// Index in range 0..95 -> A1..A8, B1..B8, etc.
-    	// Map index 0..95 to registers 0x00..0xBE (interleaved)
-    	uint8_t pwm_register = index * 2;
+void IS31FL3736_mono_set_brightness(int index, uint8_t value) {
+    if (index >= 0 && index < 96) {
+        // Index in range 0..95 -> A1..A8, B1..B8, etc.
+        // Map index 0..95 to registers 0x00..0xBE (interleaved)
+        uint8_t pwm_register          = index * 2;
         g_pwm_buffer[0][pwm_register] = value;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required  = true;
     }
 }
 
-void IS31FL3736_mono_set_brightness_all( uint8_t value )
-{
-    for ( int i = 0; i < 96; i++ )
-    {
-    	IS31FL3736_mono_set_brightness( i, value );
+void IS31FL3736_mono_set_brightness_all(uint8_t value) {
+    for (int i = 0; i < 96; i++) {
+        IS31FL3736_mono_set_brightness(i, value);
     }
 }
 
-void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled )
-{
-	// Index in range 0..95 -> A1..A8, B1..B8, etc.
+void IS31FL3736_mono_set_led_control_register(uint8_t index, bool enabled) {
+    // Index in range 0..95 -> A1..A8, B1..B8, etc.
 
-	// Map index 0..95 to registers 0x00..0xBE (interleaved)
-	uint8_t pwm_register = index * 2;
-	// Map register 0x00..0xBE (interleaved) into control register and bit
-	uint8_t control_register = pwm_register / 8;
-	uint8_t bit = pwm_register % 8;
+    // Map index 0..95 to registers 0x00..0xBE (interleaved)
+    uint8_t pwm_register = index * 2;
+    // Map register 0x00..0xBE (interleaved) into control register and bit
+    uint8_t control_register = pwm_register / 8;
+    uint8_t bit              = pwm_register % 8;
 
-    if ( enabled ) {
+    if (enabled) {
         g_led_control_registers[0][control_register] |= (1 << bit);
     } else {
         g_led_control_registers[0][control_register] &= ~(1 << bit);
@@ -275,32 +256,26 @@ void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled )
     g_led_control_registers_update_required = true;
 }
 
-void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
-{
-    if ( g_pwm_buffer_update_required )
-    {
+void IS31FL3736_update_pwm_buffers(uint8_t addr1, uint8_t addr2) {
+    if (g_pwm_buffer_update_required) {
         // Firstly we need to unlock the command register and select PG1
-        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+        IS31FL3736_write_register(addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3736_write_register(addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
 
-        IS31FL3736_write_pwm_buffer( addr1, g_pwm_buffer[0] );
-        //IS31FL3736_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+        IS31FL3736_write_pwm_buffer(addr1, g_pwm_buffer[0]);
+        // IS31FL3736_write_pwm_buffer( addr2, g_pwm_buffer[1] );
     }
     g_pwm_buffer_update_required = false;
 }
 
-void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
-{
-    if ( g_led_control_registers_update_required )
-    {
+void IS31FL3736_update_led_control_registers(uint8_t addr1, uint8_t addr2) {
+    if (g_led_control_registers_update_required) {
         // Firstly we need to unlock the command register and select PG0
-        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
-        for ( int i=0; i<24; i++ )
-        {
-            IS31FL3736_write_register(addr1, i, g_led_control_registers[0][i] );
-            //IS31FL3736_write_register(addr2, i, g_led_control_registers[1][i] );
+        IS31FL3736_write_register(addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3736_write_register(addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+        for (int i = 0; i < 24; i++) {
+            IS31FL3736_write_register(addr1, i, g_led_control_registers[0][i]);
+            // IS31FL3736_write_register(addr2, i, g_led_control_registers[1][i] );
         }
     }
 }
-

drivers/issi/is31fl3736.h

@@ -19,154 +19,150 @@
 #include <stdint.h>
 #include <stdbool.h>
 
-
 // Simple interface option.
 // If these aren't defined, just define them to make it compile
 
-
 #ifndef DRIVER_COUNT
-#define DRIVER_COUNT 2
+#    define DRIVER_COUNT 2
 #endif
 
 #ifndef DRIVER_LED_TOTAL
-#define DRIVER_LED_TOTAL 96
+#    define DRIVER_LED_TOTAL 96
 #endif
 
-
 typedef struct is31_led {
-  uint8_t driver:2;
-  uint8_t r;
-  uint8_t g;
-  uint8_t b;
+    uint8_t driver : 2;
+    uint8_t r;
+    uint8_t g;
+    uint8_t b;
 } __attribute__((packed)) is31_led;
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 
-void IS31FL3736_init( uint8_t addr );
-void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data );
-void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+void IS31FL3736_init(uint8_t addr);
+void IS31FL3736_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3736_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
 
-void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3736_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3736_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
 
-void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+void IS31FL3736_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
 
-void IS31FL3736_mono_set_brightness( int index, uint8_t value );
-void IS31FL3736_mono_set_brightness_all( uint8_t value );
-void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled );
+void IS31FL3736_mono_set_brightness(int index, uint8_t value);
+void IS31FL3736_mono_set_brightness_all(uint8_t value);
+void IS31FL3736_mono_set_led_control_register(uint8_t index, bool enabled);
 
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
-void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
-
-#define A_1  0x00
-#define A_2  0x02
-#define A_3  0x04
-#define A_4  0x06
-#define A_5  0x08
-#define A_6  0x0A
-#define A_7  0x0C
-#define A_8  0x0E
-
-#define B_1  0x10
-#define B_2  0x12
-#define B_3  0x14
-#define B_4  0x16
-#define B_5  0x18
-#define B_6  0x1A
-#define B_7  0x1C
-#define B_8  0x1E
-
-#define C_1  0x20
-#define C_2  0x22
-#define C_3  0x24
-#define C_4  0x26
-#define C_5  0x28
-#define C_6  0x2A
-#define C_7  0x2C
-#define C_8  0x2E
-
-#define D_1  0x30
-#define D_2  0x32
-#define D_3  0x34
-#define D_4  0x36
-#define D_5  0x38
-#define D_6  0x3A
-#define D_7  0x3C
-#define D_8  0x3E
-
-#define E_1  0x40
-#define E_2  0x42
-#define E_3  0x44
-#define E_4  0x46
-#define E_5  0x48
-#define E_6  0x4A
-#define E_7  0x4C
-#define E_8  0x4E
-
-#define F_1  0x50
-#define F_2  0x52
-#define F_3  0x54
-#define F_4  0x56
-#define F_5  0x58
-#define F_6  0x5A
-#define F_7  0x5C
-#define F_8  0x5E
-
-#define G_1  0x60
-#define G_2  0x62
-#define G_3  0x64
-#define G_4  0x66
-#define G_5  0x68
-#define G_6  0x6A
-#define G_7  0x6C
-#define G_8  0x6E
-
-#define H_1  0x70
-#define H_2  0x72
-#define H_3  0x74
-#define H_4  0x76
-#define H_5  0x78
-#define H_6  0x7A
-#define H_7  0x7C
-#define H_8  0x7E
-
-#define I_1  0x80
-#define I_2  0x82
-#define I_3  0x84
-#define I_4  0x86
-#define I_5  0x88
-#define I_6  0x8A
-#define I_7  0x8C
-#define I_8  0x8E
-
-#define J_1  0x90
-#define J_2  0x92
-#define J_3  0x94
-#define J_4  0x96
-#define J_5  0x98
-#define J_6  0x9A
-#define J_7  0x9C
-#define J_8  0x9E
-
-#define K_1  0xA0
-#define K_2  0xA2
-#define K_3  0xA4
-#define K_4  0xA6
-#define K_5  0xA8
-#define K_6  0xAA
-#define K_7  0xAC
-#define K_8  0xAE
-
-#define L_1  0xB0
-#define L_2  0xB2
-#define L_3  0xB4
-#define L_4  0xB6
-#define L_5  0xB8
-#define L_6  0xBA
-#define L_7  0xBC
-#define L_8  0xBE
-
+void IS31FL3736_update_pwm_buffers(uint8_t addr1, uint8_t addr2);
+void IS31FL3736_update_led_control_registers(uint8_t addr1, uint8_t addr2);
+
+#define A_1 0x00
+#define A_2 0x02
+#define A_3 0x04
+#define A_4 0x06
+#define A_5 0x08
+#define A_6 0x0A
+#define A_7 0x0C
+#define A_8 0x0E
+
+#define B_1 0x10
+#define B_2 0x12
+#define B_3 0x14
+#define B_4 0x16
+#define B_5 0x18
+#define B_6 0x1A
+#define B_7 0x1C
+#define B_8 0x1E
+
+#define C_1 0x20
+#define C_2 0x22
+#define C_3 0x24
+#define C_4 0x26
+#define C_5 0x28
+#define C_6 0x2A
+#define C_7 0x2C
+#define C_8 0x2E
+
+#define D_1 0x30
+#define D_2 0x32
+#define D_3 0x34
+#define D_4 0x36
+#define D_5 0x38
+#define D_6 0x3A
+#define D_7 0x3C
+#define D_8 0x3E
+
+#define E_1 0x40
+#define E_2 0x42
+#define E_3 0x44
+#define E_4 0x46
+#define E_5 0x48
+#define E_6 0x4A
+#define E_7 0x4C
+#define E_8 0x4E
+
+#define F_1 0x50
+#define F_2 0x52
+#define F_3 0x54
+#define F_4 0x56
+#define F_5 0x58
+#define F_6 0x5A
+#define F_7 0x5C
+#define F_8 0x5E
+
+#define G_1 0x60
+#define G_2 0x62
+#define G_3 0x64
+#define G_4 0x66
+#define G_5 0x68
+#define G_6 0x6A
+#define G_7 0x6C
+#define G_8 0x6E
+
+#define H_1 0x70
+#define H_2 0x72
+#define H_3 0x74
+#define H_4 0x76
+#define H_5 0x78
+#define H_6 0x7A
+#define H_7 0x7C
+#define H_8 0x7E
+
+#define I_1 0x80
+#define I_2 0x82
+#define I_3 0x84
+#define I_4 0x86
+#define I_5 0x88
+#define I_6 0x8A
+#define I_7 0x8C
+#define I_8 0x8E
+
+#define J_1 0x90
+#define J_2 0x92
+#define J_3 0x94
+#define J_4 0x96
+#define J_5 0x98
+#define J_6 0x9A
+#define J_7 0x9C
+#define J_8 0x9E
+
+#define K_1 0xA0
+#define K_2 0xA2
+#define K_3 0xA4
+#define K_4 0xA6
+#define K_5 0xA8
+#define K_6 0xAA
+#define K_7 0xAC
+#define K_8 0xAE
+
+#define L_1 0xB0
+#define L_2 0xB2
+#define L_3 0xB4
+#define L_4 0xB6
+#define L_5 0xB8
+#define L_6 0xBA
+#define L_7 0xBC
+#define L_8 0xBE

drivers/issi/is31fl3737.c

@@ -17,11 +17,11 @@
  */
 
 #ifdef __AVR__
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+#    include <avr/interrupt.h>
+#    include <avr/io.h>
+#    include <util/delay.h>
 #else
-#include "wait.h"
+#    include "wait.h"
 #endif
 
 #include <string.h>
@@ -46,23 +46,23 @@
 #define ISSI_INTERRUPTMASKREGISTER 0xF0
 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1
 
-#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
-#define ISSI_PAGE_PWM 0x01        //PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
-#define ISSI_PAGE_FUNCTION 0x03   //PG3
+#define ISSI_PAGE_LEDCONTROL 0x00  // PG0
+#define ISSI_PAGE_PWM 0x01         // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02  // PG2
+#define ISSI_PAGE_FUNCTION 0x03    // PG3
 
-#define ISSI_REG_CONFIGURATION 0x00 //PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
-#define ISSI_REG_RESET 0x11// PG3
-#define ISSI_REG_SWPULLUP 0x0F //PG3
-#define ISSI_REG_CSPULLUP 0x10 //PG3
+#define ISSI_REG_CONFIGURATION 0x00  // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01  // PG3
+#define ISSI_REG_RESET 0x11          // PG3
+#define ISSI_REG_SWPULLUP 0x0F       // PG3
+#define ISSI_REG_CSPULLUP 0x10       // PG3
 
 #ifndef ISSI_TIMEOUT
-  #define ISSI_TIMEOUT 100
+#    define ISSI_TIMEOUT 100
 #endif
 
 #ifndef ISSI_PERSISTENCE
-  #define ISSI_PERSISTENCE 0
+#    define ISSI_PERSISTENCE 0
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -75,178 +75,161 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3737_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required = false;
+bool    g_pwm_buffer_update_required = false;
 
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 } };
-bool g_led_control_registers_update_required = false;
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = {{0}};
+bool    g_led_control_registers_update_required   = false;
 
-void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data )
-{
+void IS31FL3737_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-  #if ISSI_PERSISTENCE > 0
+#if ISSI_PERSISTENCE > 0
     for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
-        break;
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
     }
-  #else
+#else
     i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
-  #endif
+#endif
 }
 
-void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
-{
+void IS31FL3737_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes PG1 is already selected
 
     // transmit PWM registers in 12 transfers of 16 bytes
     // g_twi_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
-    for ( int i = 0; i < 192; i += 16 ) {
+    for (int i = 0; i < 192; i += 16) {
         g_twi_transfer_buffer[0] = i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
-        for ( int j = 0; j < 16; j++ ) {
+        for (int j = 0; j < 16; j++) {
             g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
-    #if ISSI_PERSISTENCE > 0
-      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
-          break;
-      }
-    #else
-      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
-    #endif
+#if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+        }
+#else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+#endif
     }
 }
 
-void IS31FL3737_init( uint8_t addr )
-{
+void IS31FL3737_init(uint8_t addr) {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, shutdown is enabled last.
     // Set up the mode and other settings, clear the PWM registers,
     // then disable software shutdown.
 
     // Unlock the command register.
-    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG0
-    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
     // Turn off all LEDs.
-    for ( int i = 0x00; i <= 0x17; i++ )
-    {
-        IS31FL3737_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0x17; i++) {
+        IS31FL3737_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG1
-    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
     // Set PWM on all LEDs to 0
     // No need to setup Breath registers to PWM as that is the default.
-    for ( int i = 0x00; i <= 0xBF; i++ )
-    {
-        IS31FL3737_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0xBF; i++) {
+        IS31FL3737_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG3
-    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
     // Set global current to maximum.
-    IS31FL3737_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    IS31FL3737_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF);
     // Disable software shutdown.
-    IS31FL3737_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+    IS31FL3737_write_register(addr, ISSI_REG_CONFIGURATION, 0x01);
 
-    // Wait 10ms to ensure the device has woken up.
-    #ifdef __AVR__
-    _delay_ms( 10 );
-    #else
+// Wait 10ms to ensure the device has woken up.
+#ifdef __AVR__
+    _delay_ms(10);
+#else
     wait_ms(10);
-    #endif
+#endif
 }
 
-void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+void IS31FL3737_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    if (index >= 0 && index < DRIVER_LED_TOTAL) {
         is31_led led = g_is31_leds[index];
 
         g_pwm_buffer[led.driver][led.r] = red;
         g_pwm_buffer[led.driver][led.g] = green;
         g_pwm_buffer[led.driver][led.b] = blue;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required    = true;
     }
 }
 
-void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
-    {
-        IS31FL3737_set_color( i, red, green, blue );
+void IS31FL3737_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        IS31FL3737_set_color(i, red, green, blue);
     }
 }
 
-void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
-{
+void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
     is31_led led = g_is31_leds[index];
 
-  uint8_t control_register_r = led.r / 8;
-  uint8_t control_register_g = led.g / 8;
-  uint8_t control_register_b = led.b / 8;
-  uint8_t bit_r = led.r % 8;
-  uint8_t bit_g = led.g % 8;
-  uint8_t bit_b = led.b % 8;
+    uint8_t control_register_r = led.r / 8;
+    uint8_t control_register_g = led.g / 8;
+    uint8_t control_register_b = led.b / 8;
+    uint8_t bit_r              = led.r % 8;
+    uint8_t bit_g              = led.g % 8;
+    uint8_t bit_b              = led.b % 8;
 
-    if ( red ) {
+    if (red) {
         g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
     } else {
         g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
     }
-    if ( green ) {
+    if (green) {
         g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
     } else {
         g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
     }
-    if ( blue ) {
+    if (blue) {
         g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
     } else {
         g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
     }
 
     g_led_control_registers_update_required = true;
-
 }
 
-void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
-{
-    if ( g_pwm_buffer_update_required )
-    {
+void IS31FL3737_update_pwm_buffers(uint8_t addr1, uint8_t addr2) {
+    if (g_pwm_buffer_update_required) {
         // Firstly we need to unlock the command register and select PG1
-        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+        IS31FL3737_write_register(addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3737_write_register(addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
 
-        IS31FL3737_write_pwm_buffer( addr1, g_pwm_buffer[0] );
-        //IS31FL3737_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+        IS31FL3737_write_pwm_buffer(addr1, g_pwm_buffer[0]);
+        // IS31FL3737_write_pwm_buffer( addr2, g_pwm_buffer[1] );
     }
     g_pwm_buffer_update_required = false;
 }
 
-void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
-{
-    if ( g_led_control_registers_update_required )
-    {
+void IS31FL3737_update_led_control_registers(uint8_t addr1, uint8_t addr2) {
+    if (g_led_control_registers_update_required) {
         // Firstly we need to unlock the command register and select PG0
-        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
-        for ( int i=0; i<24; i++ )
-        {
-            IS31FL3737_write_register(addr1, i, g_led_control_registers[0][i] );
-            //IS31FL3737_write_register(addr2, i, g_led_control_registers[1][i] );
+        IS31FL3737_write_register(addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3737_write_register(addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+        for (int i = 0; i < 24; i++) {
+            IS31FL3737_write_register(addr1, i, g_led_control_registers[0][i]);
+            // IS31FL3737_write_register(addr2, i, g_led_control_registers[1][i] );
         }
     }
 }

drivers/issi/is31fl3737.h

@@ -16,7 +16,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #ifndef IS31FL3737_DRIVER_H
 #define IS31FL3737_DRIVER_H
 
@@ -24,184 +23,184 @@
 #include <stdbool.h>
 
 typedef struct is31_led {
-  uint8_t driver:2;
-  uint8_t r;
-  uint8_t g;
-  uint8_t b;
+    uint8_t driver : 2;
+    uint8_t r;
+    uint8_t g;
+    uint8_t b;
 } __attribute__((packed)) is31_led;
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 
-void IS31FL3737_init( uint8_t addr );
-void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data );
-void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+void IS31FL3737_init(uint8_t addr);
+void IS31FL3737_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3737_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
 
-void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3737_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3737_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
 
-void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
 
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
-void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
-
-#define A_1   0x00
-#define A_2   0x01
-#define A_3   0x02
-#define A_4   0x03
-#define A_5   0x04
-#define A_6   0x05
-#define A_7   0x08
-#define A_8   0x09
-#define A_9   0x0A
-#define A_10  0x0B
-#define A_11  0x0C
-#define A_12  0x0D
-
-#define B_1   0x10
-#define B_2   0x11
-#define B_3   0x12
-#define B_4   0x13
-#define B_5   0x14
-#define B_6   0x15
-#define B_7   0x18
-#define B_8   0x19
-#define B_9   0x1A
-#define B_10  0x1B
-#define B_11  0x1C
-#define B_12  0x1D
-
-#define C_1   0x20
-#define C_2   0x21
-#define C_3   0x22
-#define C_4   0x23
-#define C_5   0x24
-#define C_6   0x25
-#define C_7   0x28
-#define C_8   0x29
-#define C_9   0x2A
-#define C_10  0x2B
-#define C_11  0x2C
-#define C_12  0x2D
-
-#define D_1   0x30
-#define D_2   0x31
-#define D_3   0x32
-#define D_4   0x33
-#define D_5   0x34
-#define D_6   0x35
-#define D_7   0x38
-#define D_8   0x39
-#define D_9   0x3A
-#define D_10  0x3B
-#define D_11  0x3C
-#define D_12  0x3D
-
-#define E_1   0x40
-#define E_2   0x41
-#define E_3   0x42
-#define E_4   0x43
-#define E_5   0x44
-#define E_6   0x45
-#define E_7   0x48
-#define E_8   0x49
-#define E_9   0x4A
-#define E_10  0x4B
-#define E_11  0x4C
-#define E_12  0x4D
-
-#define F_1   0x50
-#define F_2   0x51
-#define F_3   0x52
-#define F_4   0x53
-#define F_5   0x54
-#define F_6   0x55
-#define F_7   0x58
-#define F_8   0x59
-#define F_9   0x5A
-#define F_10  0x5B
-#define F_11  0x5C
-#define F_12  0x5D
-
-#define G_1   0x60
-#define G_2   0x61
-#define G_3   0x62
-#define G_4   0x63
-#define G_5   0x64
-#define G_6   0x65
-#define G_7   0x68
-#define G_8   0x69
-#define G_9   0x6A
-#define G_10  0x6B
-#define G_11  0x6C
-#define G_12  0x6D
-
-#define H_1   0x70
-#define H_2   0x71
-#define H_3   0x72
-#define H_4   0x73
-#define H_5   0x74
-#define H_6   0x75
-#define H_7   0x78
-#define H_8   0x79
-#define H_9   0x7A
-#define H_10  0x7B
-#define H_11  0x7C
-#define H_12  0x7D
-
-#define I_1   0x80
-#define I_2   0x81
-#define I_3   0x82
-#define I_4   0x83
-#define I_5   0x84
-#define I_6   0x85
-#define I_7   0x88
-#define I_8   0x89
-#define I_9   0x8A
-#define I_10  0x8B
-#define I_11  0x8C
-#define I_12  0x8D
-
-#define J_1   0x90
-#define J_2   0x91
-#define J_3   0x92
-#define J_4   0x93
-#define J_5   0x94
-#define J_6   0x95
-#define J_7   0x98
-#define J_8   0x99
-#define J_9   0x9A
-#define J_10  0x9B
-#define J_11  0x9C
-#define J_12  0x9D
-
-#define K_1   0xA0
-#define K_2   0xA1
-#define K_3   0xA2
-#define K_4   0xA3
-#define K_5   0xA4
-#define K_6   0xA5
-#define K_7   0xA8
-#define K_8   0xA9
-#define K_9   0xAA
-#define K_10  0xAB
-#define K_11  0xAC
-#define K_12  0xAD
-
-#define L_1   0xB0
-#define L_2   0xB1
-#define L_3   0xB2
-#define L_4   0xB3
-#define L_5   0xB4
-#define L_6   0xB5
-#define L_7   0xB8
-#define L_8   0xB9
-#define L_9   0xBA
-#define L_10  0xBB
-#define L_11  0xBC
-#define L_12  0xBD
-
-#endif // IS31FL3737_DRIVER_H
+void IS31FL3737_update_pwm_buffers(uint8_t addr1, uint8_t addr2);
+void IS31FL3737_update_led_control_registers(uint8_t addr1, uint8_t addr2);
+
+#define A_1 0x00
+#define A_2 0x01
+#define A_3 0x02
+#define A_4 0x03
+#define A_5 0x04
+#define A_6 0x05
+#define A_7 0x08
+#define A_8 0x09
+#define A_9 0x0A
+#define A_10 0x0B
+#define A_11 0x0C
+#define A_12 0x0D
+
+#define B_1 0x10
+#define B_2 0x11
+#define B_3 0x12
+#define B_4 0x13
+#define B_5 0x14
+#define B_6 0x15
+#define B_7 0x18
+#define B_8 0x19
+#define B_9 0x1A
+#define B_10 0x1B
+#define B_11 0x1C
+#define B_12 0x1D
+
+#define C_1 0x20
+#define C_2 0x21
+#define C_3 0x22
+#define C_4 0x23
+#define C_5 0x24
+#define C_6 0x25
+#define C_7 0x28
+#define C_8 0x29
+#define C_9 0x2A
+#define C_10 0x2B
+#define C_11 0x2C
+#define C_12 0x2D
+
+#define D_1 0x30
+#define D_2 0x31
+#define D_3 0x32
+#define D_4 0x33
+#define D_5 0x34
+#define D_6 0x35
+#define D_7 0x38
+#define D_8 0x39
+#define D_9 0x3A
+#define D_10 0x3B
+#define D_11 0x3C
+#define D_12 0x3D
+
+#define E_1 0x40
+#define E_2 0x41
+#define E_3 0x42
+#define E_4 0x43
+#define E_5 0x44
+#define E_6 0x45
+#define E_7 0x48
+#define E_8 0x49
+#define E_9 0x4A
+#define E_10 0x4B
+#define E_11 0x4C
+#define E_12 0x4D
+
+#define F_1 0x50
+#define F_2 0x51
+#define F_3 0x52
+#define F_4 0x53
+#define F_5 0x54
+#define F_6 0x55
+#define F_7 0x58
+#define F_8 0x59
+#define F_9 0x5A
+#define F_10 0x5B
+#define F_11 0x5C
+#define F_12 0x5D
+
+#define G_1 0x60
+#define G_2 0x61
+#define G_3 0x62
+#define G_4 0x63
+#define G_5 0x64
+#define G_6 0x65
+#define G_7 0x68
+#define G_8 0x69
+#define G_9 0x6A
+#define G_10 0x6B
+#define G_11 0x6C
+#define G_12 0x6D
+
+#define H_1 0x70
+#define H_2 0x71
+#define H_3 0x72
+#define H_4 0x73
+#define H_5 0x74
+#define H_6 0x75
+#define H_7 0x78
+#define H_8 0x79
+#define H_9 0x7A
+#define H_10 0x7B
+#define H_11 0x7C
+#define H_12 0x7D
+
+#define I_1 0x80
+#define I_2 0x81
+#define I_3 0x82
+#define I_4 0x83
+#define I_5 0x84
+#define I_6 0x85
+#define I_7 0x88
+#define I_8 0x89
+#define I_9 0x8A
+#define I_10 0x8B
+#define I_11 0x8C
+#define I_12 0x8D
+
+#define J_1 0x90
+#define J_2 0x91
+#define J_3 0x92
+#define J_4 0x93
+#define J_5 0x94
+#define J_6 0x95
+#define J_7 0x98
+#define J_8 0x99
+#define J_9 0x9A
+#define J_10 0x9B
+#define J_11 0x9C
+#define J_12 0x9D
+
+#define K_1 0xA0
+#define K_2 0xA1
+#define K_3 0xA2
+#define K_4 0xA3
+#define K_5 0xA4
+#define K_6 0xA5
+#define K_7 0xA8
+#define K_8 0xA9
+#define K_9 0xAA
+#define K_10 0xAB
+#define K_11 0xAC
+#define K_12 0xAD
+
+#define L_1 0xB0
+#define L_2 0xB1
+#define L_3 0xB2
+#define L_4 0xB3
+#define L_5 0xB4
+#define L_6 0xB5
+#define L_7 0xB8
+#define L_8 0xB9
+#define L_9 0xBA
+#define L_10 0xBB
+#define L_11 0xBC
+#define L_12 0xBD
+
+#endif  // IS31FL3737_DRIVER_H

drivers/oled/oled_driver.c

@@ -23,64 +23,64 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <string.h>
 
 #if defined(__AVR__)
-  #include <avr/io.h>
-  #include <avr/pgmspace.h>
+#    include <avr/io.h>
+#    include <avr/pgmspace.h>
 #elif defined(ESP8266)
-  #include <pgmspace.h>
-#else // defined(ESP8266)
-  #define PROGMEM
-  #define memcpy_P(des, src, len) memcpy(des, src, len)
-#endif // defined(__AVR__)
+#    include <pgmspace.h>
+#else  // defined(ESP8266)
+#    define PROGMEM
+#    define memcpy_P(des, src, len) memcpy(des, src, len)
+#endif  // defined(__AVR__)
 
 // Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
 // for SH1106: https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf
 
 // Fundamental Commands
-#define CONTRAST                0x81
-#define DISPLAY_ALL_ON          0xA5
-#define DISPLAY_ALL_ON_RESUME   0xA4
-#define NORMAL_DISPLAY          0xA6
-#define DISPLAY_ON              0xAF
-#define DISPLAY_OFF             0xAE
-#define NOP                     0xE3
+#define CONTRAST 0x81
+#define DISPLAY_ALL_ON 0xA5
+#define DISPLAY_ALL_ON_RESUME 0xA4
+#define NORMAL_DISPLAY 0xA6
+#define DISPLAY_ON 0xAF
+#define DISPLAY_OFF 0xAE
+#define NOP 0xE3
 
 // Scrolling Commands
-#define ACTIVATE_SCROLL         0x2F
-#define DEACTIVATE_SCROLL       0x2E
-#define SCROLL_RIGHT            0x26
-#define SCROLL_LEFT             0x27
-#define SCROLL_RIGHT_UP         0x29
-#define SCROLL_LEFT_UP          0x2A
+#define ACTIVATE_SCROLL 0x2F
+#define DEACTIVATE_SCROLL 0x2E
+#define SCROLL_RIGHT 0x26
+#define SCROLL_LEFT 0x27
+#define SCROLL_RIGHT_UP 0x29
+#define SCROLL_LEFT_UP 0x2A
 
 // Addressing Setting Commands
-#define MEMORY_MODE             0x20
-#define COLUMN_ADDR             0x21
-#define PAGE_ADDR               0x22
-#define PAM_SETCOLUMN_LSB       0x00
-#define PAM_SETCOLUMN_MSB       0x10
-#define PAM_PAGE_ADDR           0xB0 // 0xb0 -- 0xb7
+#define MEMORY_MODE 0x20
+#define COLUMN_ADDR 0x21
+#define PAGE_ADDR 0x22
+#define PAM_SETCOLUMN_LSB 0x00
+#define PAM_SETCOLUMN_MSB 0x10
+#define PAM_PAGE_ADDR 0xB0  // 0xb0 -- 0xb7
 
 // Hardware Configuration Commands
-#define DISPLAY_START_LINE      0x40
-#define SEGMENT_REMAP           0xA0
-#define SEGMENT_REMAP_INV       0xA1
-#define MULTIPLEX_RATIO         0xA8
-#define COM_SCAN_INC            0xC0
-#define COM_SCAN_DEC            0xC8
-#define DISPLAY_OFFSET          0xD3
-#define COM_PINS                0xDA
-#define COM_PINS_SEQ            0x02
-#define COM_PINS_ALT            0x12
-#define COM_PINS_SEQ_LR         0x22
-#define COM_PINS_ALT_LR         0x32
+#define DISPLAY_START_LINE 0x40
+#define SEGMENT_REMAP 0xA0
+#define SEGMENT_REMAP_INV 0xA1
+#define MULTIPLEX_RATIO 0xA8
+#define COM_SCAN_INC 0xC0
+#define COM_SCAN_DEC 0xC8
+#define DISPLAY_OFFSET 0xD3
+#define COM_PINS 0xDA
+#define COM_PINS_SEQ 0x02
+#define COM_PINS_ALT 0x12
+#define COM_PINS_SEQ_LR 0x22
+#define COM_PINS_ALT_LR 0x32
 
 // Timing & Driving Commands
-#define DISPLAY_CLOCK           0xD5
-#define PRE_CHARGE_PERIOD       0xD9
-#define VCOM_DETECT             0xDB
+#define DISPLAY_CLOCK 0xD5
+#define PRE_CHARGE_PERIOD 0xD9
+#define VCOM_DETECT 0xDB
 
 // Charge Pump Commands
-#define CHARGE_PUMP             0x8D
+#define CHARGE_PUMP 0x8D
 
 // Misc defines
 #define OLED_TIMEOUT 60000
@@ -91,12 +91,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define I2C_CMD 0x00
 #define I2C_DATA 0x40
 #if defined(__AVR__)
-  // already defined on ARM
-  #define I2C_TIMEOUT 100
-  #define I2C_TRANSMIT_P(data) i2c_transmit_P((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
-#else // defined(__AVR__)
-  #define I2C_TRANSMIT_P(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
-#endif // defined(__AVR__)
+// already defined on ARM
+#    define I2C_TIMEOUT 100
+#    define I2C_TRANSMIT_P(data) i2c_transmit_P((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
+#else  // defined(__AVR__)
+#    define I2C_TRANSMIT_P(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
+#endif  // defined(__AVR__)
 #define I2C_TRANSMIT(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
 #define I2C_WRITE_REG(mode, data, size) i2c_writeReg((OLED_DISPLAY_ADDRESS << 1), mode, data, size, I2C_TIMEOUT)
 
@@ -106,16 +106,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // this is so we don't end up with rounding errors with
 // parts of the display unusable or don't get cleared correctly
 // and also allows for drawing & inverting
-uint8_t          oled_buffer[OLED_MATRIX_SIZE];
-uint8_t*         oled_cursor;
-OLED_BLOCK_TYPE  oled_dirty = 0;
-bool             oled_initialized = false;
-bool             oled_active = false;
-bool             oled_scrolling = false;
-uint8_t          oled_rotation = 0;
-uint8_t          oled_rotation_width = 0;
+uint8_t         oled_buffer[OLED_MATRIX_SIZE];
+uint8_t *       oled_cursor;
+OLED_BLOCK_TYPE oled_dirty          = 0;
+bool            oled_initialized    = false;
+bool            oled_active         = false;
+bool            oled_scrolling      = false;
+uint8_t         oled_rotation       = 0;
+uint8_t         oled_rotation_width = 0;
 #if !defined(OLED_DISABLE_TIMEOUT)
-  uint16_t         oled_last_activity;
+uint16_t oled_last_activity;
 #endif
 
 // Internal variables to reduce math instructions
@@ -123,438 +123,415 @@ uint8_t          oled_rotation_width = 0;
 #if defined(__AVR__)
 // identical to i2c_transmit, but for PROGMEM since all initialization is in PROGMEM arrays currently
 // probably should move this into i2c_master...
-static i2c_status_t i2c_transmit_P(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
-  i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
+static i2c_status_t i2c_transmit_P(uint8_t address, const uint8_t *data, uint16_t length, uint16_t timeout) {
+    i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
 
-  for (uint16_t i = 0; i < length && status >= 0; i++) {
-    status = i2c_write(pgm_read_byte((const char*)data++), timeout);
-    if (status) break;
-  }
+    for (uint16_t i = 0; i < length && status >= 0; i++) {
+        status = i2c_write(pgm_read_byte((const char *)data++), timeout);
+        if (status) break;
+    }
 
-  i2c_stop();
+    i2c_stop();
 
-  return status;
+    return status;
 }
 #endif
 
 // Flips the rendering bits for a character at the current cursor position
-static void InvertCharacter(uint8_t *cursor)
-{
-  const uint8_t *end = cursor + OLED_FONT_WIDTH;
-  while (cursor < end) {
-    *cursor = ~(*cursor);
-    cursor++;
-  }
+static void InvertCharacter(uint8_t *cursor) {
+    const uint8_t *end = cursor + OLED_FONT_WIDTH;
+    while (cursor < end) {
+        *cursor = ~(*cursor);
+        cursor++;
+    }
 }
 
 bool oled_init(uint8_t rotation) {
-  oled_rotation = oled_init_user(rotation);
-  if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
-    oled_rotation_width = OLED_DISPLAY_WIDTH;
-  } else {
-    oled_rotation_width = OLED_DISPLAY_HEIGHT;
-  }
-  i2c_init();
-
-  static const uint8_t PROGMEM display_setup1[] = {
-    I2C_CMD,
-    DISPLAY_OFF,
-    DISPLAY_CLOCK, 0x80,
-    MULTIPLEX_RATIO, OLED_DISPLAY_HEIGHT - 1,
-    DISPLAY_OFFSET, 0x00,
-    DISPLAY_START_LINE | 0x00,
-    CHARGE_PUMP, 0x14,
+    oled_rotation = oled_init_user(rotation);
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        oled_rotation_width = OLED_DISPLAY_WIDTH;
+    } else {
+        oled_rotation_width = OLED_DISPLAY_HEIGHT;
+    }
+    i2c_init();
+
+    static const uint8_t PROGMEM display_setup1[] = {
+        I2C_CMD,
+        DISPLAY_OFF,
+        DISPLAY_CLOCK,
+        0x80,
+        MULTIPLEX_RATIO,
+        OLED_DISPLAY_HEIGHT - 1,
+        DISPLAY_OFFSET,
+        0x00,
+        DISPLAY_START_LINE | 0x00,
+        CHARGE_PUMP,
+        0x14,
 #if (OLED_IC != OLED_IC_SH1106)
-    // MEMORY_MODE is unsupported on SH1106 (Page Addressing only)
-    MEMORY_MODE, 0x00, // Horizontal addressing mode
+        // MEMORY_MODE is unsupported on SH1106 (Page Addressing only)
+        MEMORY_MODE,
+        0x00,  // Horizontal addressing mode
 #endif
-  };
-  if (I2C_TRANSMIT_P(display_setup1) != I2C_STATUS_SUCCESS) {
-    print("oled_init cmd set 1 failed\n");
-    return false;
-  }
-
-  if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_180)) {
-    static const uint8_t PROGMEM display_normal[] = {
-      I2C_CMD,
-      SEGMENT_REMAP_INV,
-      COM_SCAN_DEC };
-    if (I2C_TRANSMIT_P(display_normal) != I2C_STATUS_SUCCESS) {
-      print("oled_init cmd normal rotation failed\n");
-      return false;
+    };
+    if (I2C_TRANSMIT_P(display_setup1) != I2C_STATUS_SUCCESS) {
+        print("oled_init cmd set 1 failed\n");
+        return false;
     }
-  } else {
-    static const uint8_t PROGMEM display_flipped[] = {
-      I2C_CMD,
-      SEGMENT_REMAP,
-      COM_SCAN_INC };
-    if (I2C_TRANSMIT_P(display_flipped) != I2C_STATUS_SUCCESS) {
-      print("display_flipped failed\n");
-      return false;
+
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_180)) {
+        static const uint8_t PROGMEM display_normal[] = {I2C_CMD, SEGMENT_REMAP_INV, COM_SCAN_DEC};
+        if (I2C_TRANSMIT_P(display_normal) != I2C_STATUS_SUCCESS) {
+            print("oled_init cmd normal rotation failed\n");
+            return false;
+        }
+    } else {
+        static const uint8_t PROGMEM display_flipped[] = {I2C_CMD, SEGMENT_REMAP, COM_SCAN_INC};
+        if (I2C_TRANSMIT_P(display_flipped) != I2C_STATUS_SUCCESS) {
+            print("display_flipped failed\n");
+            return false;
+        }
     }
-  }
-
-  static const uint8_t PROGMEM display_setup2[] = {
-    I2C_CMD,
-    COM_PINS, OLED_COM_PINS,
-    CONTRAST, 0x8F,
-    PRE_CHARGE_PERIOD, 0xF1,
-    VCOM_DETECT, 0x40,
-    DISPLAY_ALL_ON_RESUME,
-    NORMAL_DISPLAY,
-    DEACTIVATE_SCROLL,
-    DISPLAY_ON };
-  if (I2C_TRANSMIT_P(display_setup2) != I2C_STATUS_SUCCESS) {
-    print("display_setup2 failed\n");
-    return false;
-  }
-
-  oled_clear();
-  oled_initialized = true;
-  oled_active = true;
-  oled_scrolling = false;
-  return true;
-}
 
-__attribute__((weak))
-oled_rotation_t oled_init_user(oled_rotation_t rotation) {
-  return rotation;
+    static const uint8_t PROGMEM display_setup2[] = {I2C_CMD, COM_PINS, OLED_COM_PINS, CONTRAST, 0x8F, PRE_CHARGE_PERIOD, 0xF1, VCOM_DETECT, 0x40, DISPLAY_ALL_ON_RESUME, NORMAL_DISPLAY, DEACTIVATE_SCROLL, DISPLAY_ON};
+    if (I2C_TRANSMIT_P(display_setup2) != I2C_STATUS_SUCCESS) {
+        print("display_setup2 failed\n");
+        return false;
+    }
+
+    oled_clear();
+    oled_initialized = true;
+    oled_active      = true;
+    oled_scrolling   = false;
+    return true;
 }
 
+__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; }
+
 void oled_clear(void) {
-  memset(oled_buffer, 0, sizeof(oled_buffer));
-  oled_cursor = &oled_buffer[0];
-  oled_dirty = -1; // -1 will be max value as long as display_dirty is unsigned type
+    memset(oled_buffer, 0, sizeof(oled_buffer));
+    oled_cursor = &oled_buffer[0];
+    oled_dirty  = -1;  // -1 will be max value as long as display_dirty is unsigned type
 }
 
-static void calc_bounds(uint8_t update_start, uint8_t* cmd_array)
-{
-  // Calculate commands to set memory addressing bounds.
-  uint8_t start_page = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH;
-  uint8_t start_column = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH;
+static void calc_bounds(uint8_t update_start, uint8_t *cmd_array) {
+    // Calculate commands to set memory addressing bounds.
+    uint8_t start_page   = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH;
+    uint8_t start_column = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH;
 #if (OLED_IC == OLED_IC_SH1106)
-  // Commands for Page Addressing Mode. Sets starting page and column; has no end bound.
-  // Column value must be split into high and low nybble and sent as two commands.
-  cmd_array[0] = PAM_PAGE_ADDR | start_page;
-  cmd_array[1] = PAM_SETCOLUMN_LSB | ((OLED_COLUMN_OFFSET + start_column) & 0x0f);
-  cmd_array[2] = PAM_SETCOLUMN_MSB | ((OLED_COLUMN_OFFSET + start_column) >> 4 & 0x0f);
-  cmd_array[3] = NOP;
-  cmd_array[4] = NOP;
-  cmd_array[5] = NOP;
+    // Commands for Page Addressing Mode. Sets starting page and column; has no end bound.
+    // Column value must be split into high and low nybble and sent as two commands.
+    cmd_array[0] = PAM_PAGE_ADDR | start_page;
+    cmd_array[1] = PAM_SETCOLUMN_LSB | ((OLED_COLUMN_OFFSET + start_column) & 0x0f);
+    cmd_array[2] = PAM_SETCOLUMN_MSB | ((OLED_COLUMN_OFFSET + start_column) >> 4 & 0x0f);
+    cmd_array[3] = NOP;
+    cmd_array[4] = NOP;
+    cmd_array[5] = NOP;
 #else
-  // Commands for use in Horizontal Addressing mode.
-  cmd_array[1] = start_column;
-  cmd_array[4] = start_page;
-  cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1];
-  cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1;
+    // Commands for use in Horizontal Addressing mode.
+    cmd_array[1] = start_column;
+    cmd_array[4] = start_page;
+    cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1];
+    cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1;
 #endif
 }
 
-static void calc_bounds_90(uint8_t update_start, uint8_t* cmd_array)
-{
-  cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8;
-  cmd_array[4] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT;
-  cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8 - 1 + cmd_array[1];;
-  cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8;
+static void calc_bounds_90(uint8_t update_start, uint8_t *cmd_array) {
+    cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8;
+    cmd_array[4] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT;
+    cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8 - 1 + cmd_array[1];
+    ;
+    cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8;
 }
 
-uint8_t crot(uint8_t a, int8_t n)
-{
-  const uint8_t mask = 0x7;
-  n &= mask;
-  return a << n | a >> (-n & mask);
+uint8_t crot(uint8_t a, int8_t n) {
+    const uint8_t mask = 0x7;
+    n &= mask;
+    return a << n | a >> (-n & mask);
 }
 
-static void rotate_90(const uint8_t* src, uint8_t* dest)
-{
-  for (uint8_t i = 0, shift = 7; i < 8; ++i, --shift) {
-    uint8_t selector = (1 << i);
-    for (uint8_t j = 0; j < 8; ++j) {
-      dest[i] |= crot(src[j] & selector, shift - (int8_t)j);
+static void rotate_90(const uint8_t *src, uint8_t *dest) {
+    for (uint8_t i = 0, shift = 7; i < 8; ++i, --shift) {
+        uint8_t selector = (1 << i);
+        for (uint8_t j = 0; j < 8; ++j) {
+            dest[i] |= crot(src[j] & selector, shift - (int8_t)j);
+        }
     }
-  }
 }
 
 void oled_render(void) {
-  // Do we have work to do?
-  if (!oled_dirty || oled_scrolling) {
-    return;
-  }
-
-  // Find first dirty block
-  uint8_t update_start = 0;
-  while (!(oled_dirty & (1 << update_start))) { ++update_start; }
-
-  // Set column & page position
-  static uint8_t display_start[] = {
-    I2C_CMD,
-    COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1,
-    PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1 };
-  if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
-    calc_bounds(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start
-  } else {
-    calc_bounds_90(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start
-  }
-
-  // Send column & page position
-  if (I2C_TRANSMIT(display_start) != I2C_STATUS_SUCCESS) {
-    print("oled_render offset command failed\n");
-    return;
-  }
-
-  if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
-    // Send render data chunk as is
-    if (I2C_WRITE_REG(I2C_DATA, &oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
-      print("oled_render data failed\n");
-      return;
+    // Do we have work to do?
+    if (!oled_dirty || oled_scrolling) {
+        return;
+    }
+
+    // Find first dirty block
+    uint8_t update_start = 0;
+    while (!(oled_dirty & (1 << update_start))) {
+        ++update_start;
     }
-  } else {
-    // Rotate the render chunks
-    const static uint8_t source_map[] = OLED_SOURCE_MAP;
-    const static uint8_t target_map[] = OLED_TARGET_MAP;
-
-    static uint8_t temp_buffer[OLED_BLOCK_SIZE];
-    memset(temp_buffer, 0, sizeof(temp_buffer));
-    for(uint8_t i = 0; i < sizeof(source_map); ++i) {
-      rotate_90(&oled_buffer[OLED_BLOCK_SIZE * update_start + source_map[i]], &temp_buffer[target_map[i]]);
+
+    // Set column & page position
+    static uint8_t display_start[] = {I2C_CMD, COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1, PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1};
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        calc_bounds(update_start, &display_start[1]);  // Offset from I2C_CMD byte at the start
+    } else {
+        calc_bounds_90(update_start, &display_start[1]);  // Offset from I2C_CMD byte at the start
     }
 
-    // Send render data chunk after rotating
-    if (I2C_WRITE_REG(I2C_DATA, &temp_buffer[0], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
-      print("oled_render data failed\n");
-      return;
+    // Send column & page position
+    if (I2C_TRANSMIT(display_start) != I2C_STATUS_SUCCESS) {
+        print("oled_render offset command failed\n");
+        return;
     }
-  }
 
-  // Turn on display if it is off
-  oled_on();
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        // Send render data chunk as is
+        if (I2C_WRITE_REG(I2C_DATA, &oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
+            print("oled_render data failed\n");
+            return;
+        }
+    } else {
+        // Rotate the render chunks
+        const static uint8_t source_map[] = OLED_SOURCE_MAP;
+        const static uint8_t target_map[] = OLED_TARGET_MAP;
+
+        static uint8_t temp_buffer[OLED_BLOCK_SIZE];
+        memset(temp_buffer, 0, sizeof(temp_buffer));
+        for (uint8_t i = 0; i < sizeof(source_map); ++i) {
+            rotate_90(&oled_buffer[OLED_BLOCK_SIZE * update_start + source_map[i]], &temp_buffer[target_map[i]]);
+        }
+
+        // Send render data chunk after rotating
+        if (I2C_WRITE_REG(I2C_DATA, &temp_buffer[0], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
+            print("oled_render data failed\n");
+            return;
+        }
+    }
 
-  // Clear dirty flag
-  oled_dirty &= ~(1 << update_start);
+    // Turn on display if it is off
+    oled_on();
+
+    // Clear dirty flag
+    oled_dirty &= ~(1 << update_start);
 }
 
 void oled_set_cursor(uint8_t col, uint8_t line) {
-  uint16_t index = line * oled_rotation_width + col * OLED_FONT_WIDTH;
+    uint16_t index = line * oled_rotation_width + col * OLED_FONT_WIDTH;
 
-  // Out of bounds?
-  if (index >= OLED_MATRIX_SIZE) {
-    index = 0;
-  }
+    // Out of bounds?
+    if (index >= OLED_MATRIX_SIZE) {
+        index = 0;
+    }
 
-  oled_cursor = &oled_buffer[index];
+    oled_cursor = &oled_buffer[index];
 }
 
 void oled_advance_page(bool clearPageRemainder) {
-  uint16_t index = oled_cursor - &oled_buffer[0];
-  uint8_t remaining = oled_rotation_width - (index % oled_rotation_width);
-
-  if (clearPageRemainder) {
-    // Remaining Char count
-    remaining = remaining / OLED_FONT_WIDTH;
-
-    // Write empty character until next line
-    while (remaining--)
-      oled_write_char(' ', false);
-  } else {
-    // Next page index out of bounds?
-    if (index + remaining >= OLED_MATRIX_SIZE) {
-      index = 0;
-      remaining = 0;
+    uint16_t index     = oled_cursor - &oled_buffer[0];
+    uint8_t  remaining = oled_rotation_width - (index % oled_rotation_width);
+
+    if (clearPageRemainder) {
+        // Remaining Char count
+        remaining = remaining / OLED_FONT_WIDTH;
+
+        // Write empty character until next line
+        while (remaining--) oled_write_char(' ', false);
+    } else {
+        // Next page index out of bounds?
+        if (index + remaining >= OLED_MATRIX_SIZE) {
+            index     = 0;
+            remaining = 0;
+        }
+
+        oled_cursor = &oled_buffer[index + remaining];
     }
-
-    oled_cursor = &oled_buffer[index + remaining];
-  }
 }
 
 void oled_advance_char(void) {
-  uint16_t nextIndex = oled_cursor - &oled_buffer[0] + OLED_FONT_WIDTH;
-  uint8_t remainingSpace = oled_rotation_width - (nextIndex % oled_rotation_width);
+    uint16_t nextIndex      = oled_cursor - &oled_buffer[0] + OLED_FONT_WIDTH;
+    uint8_t  remainingSpace = oled_rotation_width - (nextIndex % oled_rotation_width);
 
-  // Do we have enough space on the current line for the next character
-  if (remainingSpace < OLED_FONT_WIDTH) {
-    nextIndex += remainingSpace;
-  }
+    // Do we have enough space on the current line for the next character
+    if (remainingSpace < OLED_FONT_WIDTH) {
+        nextIndex += remainingSpace;
+    }
 
-  // Did we go out of bounds
-  if (nextIndex >= OLED_MATRIX_SIZE) {
-    nextIndex = 0;
-  }
+    // Did we go out of bounds
+    if (nextIndex >= OLED_MATRIX_SIZE) {
+        nextIndex = 0;
+    }
 
-  // Update cursor position
-  oled_cursor = &oled_buffer[nextIndex];
+    // Update cursor position
+    oled_cursor = &oled_buffer[nextIndex];
 }
 
 // Main handler that writes character data to the display buffer
 void oled_write_char(const char data, bool invert) {
-  // Advance to the next line if newline
-  if (data == '\n') {
-    // Old source wrote ' ' until end of line...
-    oled_advance_page(true);
-    return;
-  }
-
-  // copy the current render buffer to check for dirty after
-  static uint8_t oled_temp_buffer[OLED_FONT_WIDTH];
-  memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH);
-
-  // set the reder buffer data
-  uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index
-  if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) {
-    memset(oled_cursor, 0x00, OLED_FONT_WIDTH);
-  } else {
-    const uint8_t *glyph = &font[(cast_data - OLED_FONT_START) * OLED_FONT_WIDTH];
-    memcpy_P(oled_cursor, glyph, OLED_FONT_WIDTH);
-  }
-
-  // Invert if needed
-  if (invert) {
-    InvertCharacter(oled_cursor);
-  }
-
-  // Dirty check
-  if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) {
-    uint16_t index = oled_cursor - &oled_buffer[0];
-    oled_dirty |= (1 << (index / OLED_BLOCK_SIZE));
-    // Edgecase check if the written data spans the 2 chunks
-    oled_dirty |= (1 << ((index + OLED_FONT_WIDTH) / OLED_BLOCK_SIZE));
-  }
-
-  // Finally move to the next char
-  oled_advance_char();
+    // Advance to the next line if newline
+    if (data == '\n') {
+        // Old source wrote ' ' until end of line...
+        oled_advance_page(true);
+        return;
+    }
+
+    // copy the current render buffer to check for dirty after
+    static uint8_t oled_temp_buffer[OLED_FONT_WIDTH];
+    memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH);
+
+    // set the reder buffer data
+    uint8_t cast_data = (uint8_t)data;  // font based on unsigned type for index
+    if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) {
+        memset(oled_cursor, 0x00, OLED_FONT_WIDTH);
+    } else {
+        const uint8_t *glyph = &font[(cast_data - OLED_FONT_START) * OLED_FONT_WIDTH];
+        memcpy_P(oled_cursor, glyph, OLED_FONT_WIDTH);
+    }
+
+    // Invert if needed
+    if (invert) {
+        InvertCharacter(oled_cursor);
+    }
+
+    // Dirty check
+    if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) {
+        uint16_t index = oled_cursor - &oled_buffer[0];
+        oled_dirty |= (1 << (index / OLED_BLOCK_SIZE));
+        // Edgecase check if the written data spans the 2 chunks
+        oled_dirty |= (1 << ((index + OLED_FONT_WIDTH) / OLED_BLOCK_SIZE));
+    }
+
+    // Finally move to the next char
+    oled_advance_char();
 }
 
 void oled_write(const char *data, bool invert) {
-  const char *end = data + strlen(data);
-  while (data < end) {
-    oled_write_char(*data, invert);
-    data++;
-  }
+    const char *end = data + strlen(data);
+    while (data < end) {
+        oled_write_char(*data, invert);
+        data++;
+    }
 }
 
 void oled_write_ln(const char *data, bool invert) {
-  oled_write(data, invert);
-  oled_advance_page(true);
+    oled_write(data, invert);
+    oled_advance_page(true);
 }
 
 #if defined(__AVR__)
 void oled_write_P(const char *data, bool invert) {
-  uint8_t c = pgm_read_byte(data);
-  while (c != 0) {
-    oled_write_char(c, invert);
-    c = pgm_read_byte(++data);
-  }
+    uint8_t c = pgm_read_byte(data);
+    while (c != 0) {
+        oled_write_char(c, invert);
+        c = pgm_read_byte(++data);
+    }
 }
 
 void oled_write_ln_P(const char *data, bool invert) {
-  oled_write_P(data, invert);
-  oled_advance_page(true);
+    oled_write_P(data, invert);
+    oled_advance_page(true);
 }
-#endif // defined(__AVR__)
+#endif  // defined(__AVR__)
 
 bool oled_on(void) {
 #if !defined(OLED_DISABLE_TIMEOUT)
-  oled_last_activity = timer_read();
+    oled_last_activity = timer_read();
 #endif
 
-  static const uint8_t PROGMEM display_on[] = { I2C_CMD, DISPLAY_ON };
-  if (!oled_active) {
-    if (I2C_TRANSMIT_P(display_on) != I2C_STATUS_SUCCESS) {
-      print("oled_on cmd failed\n");
-      return oled_active;
+    static const uint8_t PROGMEM display_on[] = {I2C_CMD, DISPLAY_ON};
+    if (!oled_active) {
+        if (I2C_TRANSMIT_P(display_on) != I2C_STATUS_SUCCESS) {
+            print("oled_on cmd failed\n");
+            return oled_active;
+        }
+        oled_active = true;
     }
-    oled_active = true;
-  }
-  return oled_active;
+    return oled_active;
 }
 
 bool oled_off(void) {
-  static const uint8_t PROGMEM display_off[] = { I2C_CMD, DISPLAY_OFF };
-  if (oled_active) {
-    if (I2C_TRANSMIT_P(display_off) != I2C_STATUS_SUCCESS) {
-      print("oled_off cmd failed\n");
-      return oled_active;
+    static const uint8_t PROGMEM display_off[] = {I2C_CMD, DISPLAY_OFF};
+    if (oled_active) {
+        if (I2C_TRANSMIT_P(display_off) != I2C_STATUS_SUCCESS) {
+            print("oled_off cmd failed\n");
+            return oled_active;
+        }
+        oled_active = false;
     }
-    oled_active = false;
-  }
-  return !oled_active;
+    return !oled_active;
 }
 
 bool oled_scroll_right(void) {
-  // Dont enable scrolling if we need to update the display
-  // This prevents scrolling of bad data from starting the scroll too early after init
-  if (!oled_dirty && !oled_scrolling) {
-    static const uint8_t PROGMEM display_scroll_right[] = {
-      I2C_CMD, SCROLL_RIGHT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL };
-    if (I2C_TRANSMIT_P(display_scroll_right) != I2C_STATUS_SUCCESS) {
-      print("oled_scroll_right cmd failed\n");
-      return oled_scrolling;
+    // Dont enable scrolling if we need to update the display
+    // This prevents scrolling of bad data from starting the scroll too early after init
+    if (!oled_dirty && !oled_scrolling) {
+        static const uint8_t PROGMEM display_scroll_right[] = {I2C_CMD, SCROLL_RIGHT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL};
+        if (I2C_TRANSMIT_P(display_scroll_right) != I2C_STATUS_SUCCESS) {
+            print("oled_scroll_right cmd failed\n");
+            return oled_scrolling;
+        }
+        oled_scrolling = true;
     }
-    oled_scrolling = true;
-  }
-  return oled_scrolling;
+    return oled_scrolling;
 }
 
 bool oled_scroll_left(void) {
-  // Dont enable scrolling if we need to update the display
-  // This prevents scrolling of bad data from starting the scroll too early after init
-  if (!oled_dirty && !oled_scrolling) {
-    static const uint8_t PROGMEM display_scroll_left[] = {
-      I2C_CMD, SCROLL_LEFT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL };
-    if (I2C_TRANSMIT_P(display_scroll_left) != I2C_STATUS_SUCCESS) {
-      print("oled_scroll_left cmd failed\n");
-      return oled_scrolling;
+    // Dont enable scrolling if we need to update the display
+    // This prevents scrolling of bad data from starting the scroll too early after init
+    if (!oled_dirty && !oled_scrolling) {
+        static const uint8_t PROGMEM display_scroll_left[] = {I2C_CMD, SCROLL_LEFT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL};
+        if (I2C_TRANSMIT_P(display_scroll_left) != I2C_STATUS_SUCCESS) {
+            print("oled_scroll_left cmd failed\n");
+            return oled_scrolling;
+        }
+        oled_scrolling = true;
     }
-    oled_scrolling = true;
-  }
-  return oled_scrolling;
+    return oled_scrolling;
 }
 
 bool oled_scroll_off(void) {
-  if (oled_scrolling) {
-    static const uint8_t PROGMEM display_scroll_off[] = { I2C_CMD, DEACTIVATE_SCROLL };
-    if (I2C_TRANSMIT_P(display_scroll_off) != I2C_STATUS_SUCCESS) {
-      print("oled_scroll_off cmd failed\n");
-      return oled_scrolling;
+    if (oled_scrolling) {
+        static const uint8_t PROGMEM display_scroll_off[] = {I2C_CMD, DEACTIVATE_SCROLL};
+        if (I2C_TRANSMIT_P(display_scroll_off) != I2C_STATUS_SUCCESS) {
+            print("oled_scroll_off cmd failed\n");
+            return oled_scrolling;
+        }
+        oled_scrolling = false;
     }
-    oled_scrolling = false;
-  }
-  return !oled_scrolling;
+    return !oled_scrolling;
 }
 
 uint8_t oled_max_chars(void) {
-  if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
-    return OLED_DISPLAY_WIDTH / OLED_FONT_WIDTH;
-  }
-  return OLED_DISPLAY_HEIGHT / OLED_FONT_WIDTH;
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        return OLED_DISPLAY_WIDTH / OLED_FONT_WIDTH;
+    }
+    return OLED_DISPLAY_HEIGHT / OLED_FONT_WIDTH;
 }
 
 uint8_t oled_max_lines(void) {
-  if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
-    return OLED_DISPLAY_HEIGHT / OLED_FONT_HEIGHT;
-  }
-  return OLED_DISPLAY_WIDTH / OLED_FONT_HEIGHT;
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        return OLED_DISPLAY_HEIGHT / OLED_FONT_HEIGHT;
+    }
+    return OLED_DISPLAY_WIDTH / OLED_FONT_HEIGHT;
 }
 
 void oled_task(void) {
-  if (!oled_initialized) {
-    return;
-  }
+    if (!oled_initialized) {
+        return;
+    }
 
-  oled_set_cursor(0, 0);
+    oled_set_cursor(0, 0);
 
-  oled_task_user();
+    oled_task_user();
 
-  // Smart render system, no need to check for dirty
-  oled_render();
+    // Smart render system, no need to check for dirty
+    oled_render();
 
-  // Display timeout check
+    // Display timeout check
 #if !defined(OLED_DISABLE_TIMEOUT)
-  if (oled_active && timer_elapsed(oled_last_activity) > OLED_TIMEOUT) {
-    oled_off();
-  }
+    if (oled_active && timer_elapsed(oled_last_activity) > OLED_TIMEOUT) {
+        oled_off();
+    }
 #endif
 }
 
-__attribute__((weak))
-void oled_task_user(void) {
-}
+__attribute__((weak)) void oled_task_user(void) {}

drivers/oled/oled_driver.h

@@ -21,121 +21,125 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // an enumeration of the chips this driver supports
 #define OLED_IC_SSD1306 0
-#define OLED_IC_SH1106  1
+#define OLED_IC_SH1106 1
 
 #if defined(OLED_DISPLAY_CUSTOM)
-  // Expected user to implement the necessary defines
+// Expected user to implement the necessary defines
 #elif defined(OLED_DISPLAY_128X64)
-  // Double height 128x64
-#ifndef OLED_DISPLAY_WIDTH
-  #define OLED_DISPLAY_WIDTH 128
-#endif
-#ifndef OLED_DISPLAY_HEIGHT
-  #define OLED_DISPLAY_HEIGHT 64
-#endif
-#ifndef OLED_MATRIX_SIZE
-  #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 1024 (compile time mathed)
-#endif
-#ifndef OLED_BLOCK_TYPE
-  #define OLED_BLOCK_TYPE uint16_t
-#endif
-#ifndef OLED_BLOCK_COUNT
-  #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 32 (compile time mathed)
-#endif
-#ifndef OLED_BLOCK_SIZE
-  #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed)
-#endif
-#ifndef OLED_COM_PINS
-  #define OLED_COM_PINS COM_PINS_ALT
-#endif
-
-  // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
-  // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
-#ifndef OLED_SOURCE_MAP
-  #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
-#endif
-#ifndef OLED_TARGET_MAP
-  #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 }
-#endif
-  // If OLED_BLOCK_TYPE is uint32_t, these tables would look like:
-  // #define OLED_SOURCE_MAP { 32, 40, 48, 56 }
-  // #define OLED_TARGET_MAP { 24, 16, 8, 0 }
-  // If OLED_BLOCK_TYPE is uint16_t, these tables would look like:
-  // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
-  // #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 }
-  // If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
-  // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 }
-  // #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 }
-#else // defined(OLED_DISPLAY_128X64)
-  // Default 128x32
-#ifndef OLED_DISPLAY_WIDTH
-  #define OLED_DISPLAY_WIDTH 128
-#endif
-#ifndef OLED_DISPLAY_HEIGHT
-  #define OLED_DISPLAY_HEIGHT 32
-#endif
-#ifndef OLED_MATRIX_SIZE
-  #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed)
-#endif
-#ifndef OLED_BLOCK_TYPE
-  #define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only
-#endif
-#ifndef OLED_BLOCK_COUNT
-  #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed)
-#endif
-#ifndef OLED_BLOCK_SIZE
-  #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed)
-#endif
-#ifndef OLED_COM_PINS
-  #define OLED_COM_PINS COM_PINS_SEQ
-#endif
-
-  // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
-  // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
-#ifndef OLED_SOURCE_MAP
-  #define OLED_SOURCE_MAP { 0, 8, 16, 24 }
-#endif
-#ifndef OLED_TARGET_MAP
-  #define OLED_TARGET_MAP { 24, 16, 8, 0 }
-#endif
-  // If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
-  // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
-  // #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 }
-#endif // defined(OLED_DISPLAY_CUSTOM)
+// Double height 128x64
+#    ifndef OLED_DISPLAY_WIDTH
+#        define OLED_DISPLAY_WIDTH 128
+#    endif
+#    ifndef OLED_DISPLAY_HEIGHT
+#        define OLED_DISPLAY_HEIGHT 64
+#    endif
+#    ifndef OLED_MATRIX_SIZE
+#        define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)  // 1024 (compile time mathed)
+#    endif
+#    ifndef OLED_BLOCK_TYPE
+#        define OLED_BLOCK_TYPE uint16_t
+#    endif
+#    ifndef OLED_BLOCK_COUNT
+#        define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)  // 32 (compile time mathed)
+#    endif
+#    ifndef OLED_BLOCK_SIZE
+#        define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)  // 32 (compile time mathed)
+#    endif
+#    ifndef OLED_COM_PINS
+#        define OLED_COM_PINS COM_PINS_ALT
+#    endif
+
+// For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
+// The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
+#    ifndef OLED_SOURCE_MAP
+#        define OLED_SOURCE_MAP \
+            { 0, 8, 16, 24, 32, 40, 48, 56 }
+#    endif
+#    ifndef OLED_TARGET_MAP
+#        define OLED_TARGET_MAP \
+            { 56, 48, 40, 32, 24, 16, 8, 0 }
+#    endif
+// If OLED_BLOCK_TYPE is uint32_t, these tables would look like:
+// #define OLED_SOURCE_MAP { 32, 40, 48, 56 }
+// #define OLED_TARGET_MAP { 24, 16, 8, 0 }
+// If OLED_BLOCK_TYPE is uint16_t, these tables would look like:
+// #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
+// #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 }
+// If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
+// #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 }
+// #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 }
+#else  // defined(OLED_DISPLAY_128X64)
+// Default 128x32
+#    ifndef OLED_DISPLAY_WIDTH
+#        define OLED_DISPLAY_WIDTH 128
+#    endif
+#    ifndef OLED_DISPLAY_HEIGHT
+#        define OLED_DISPLAY_HEIGHT 32
+#    endif
+#    ifndef OLED_MATRIX_SIZE
+#        define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)  // 512 (compile time mathed)
+#    endif
+#    ifndef OLED_BLOCK_TYPE
+#        define OLED_BLOCK_TYPE uint16_t  // Type to use for segmenting the oled display for smart rendering, use unsigned types only
+#    endif
+#    ifndef OLED_BLOCK_COUNT
+#        define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)  // 16 (compile time mathed)
+#    endif
+#    ifndef OLED_BLOCK_SIZE
+#        define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)  // 32 (compile time mathed)
+#    endif
+#    ifndef OLED_COM_PINS
+#        define OLED_COM_PINS COM_PINS_SEQ
+#    endif
+
+// For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
+// The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
+#    ifndef OLED_SOURCE_MAP
+#        define OLED_SOURCE_MAP \
+            { 0, 8, 16, 24 }
+#    endif
+#    ifndef OLED_TARGET_MAP
+#        define OLED_TARGET_MAP \
+            { 24, 16, 8, 0 }
+#    endif
+// If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
+// #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
+// #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 }
+#endif  // defined(OLED_DISPLAY_CUSTOM)
 
 #if !defined(OLED_IC)
-  #define OLED_IC OLED_IC_SSD1306
+#    define OLED_IC OLED_IC_SSD1306
 #endif
 
 // the column address corresponding to the first column in the display hardware
 #if !defined(OLED_COLUMN_OFFSET)
-  #define OLED_COLUMN_OFFSET 0
+#    define OLED_COLUMN_OFFSET 0
 #endif
 
 // Address to use for the i2c oled communication
 #if !defined(OLED_DISPLAY_ADDRESS)
-  #define OLED_DISPLAY_ADDRESS 0x3C
+#    define OLED_DISPLAY_ADDRESS 0x3C
 #endif
 
 // Custom font file to use
 #if !defined(OLED_FONT_H)
-  #define OLED_FONT_H "glcdfont.c"
+#    define OLED_FONT_H "glcdfont.c"
 #endif
 // unsigned char value of the first character in the font file
 #if !defined(OLED_FONT_START)
-  #define OLED_FONT_START 0
+#    define OLED_FONT_START 0
 #endif
 // unsigned char value of the last character in the font file
 #if !defined(OLED_FONT_END)
-  #define OLED_FONT_END 224
+#    define OLED_FONT_END 224
 #endif
 // Font render width
 #if !defined(OLED_FONT_WIDTH)
-  #define OLED_FONT_WIDTH 6
+#    define OLED_FONT_WIDTH 6
 #endif
 // Font render height
 #if !defined(OLED_FONT_HEIGHT)
-  #define OLED_FONT_HEIGHT 8
+#    define OLED_FONT_HEIGHT 8
 #endif
 
 // OLED Rotation enum values are flags
@@ -143,7 +147,7 @@ typedef enum {
     OLED_ROTATION_0   = 0,
     OLED_ROTATION_90  = 1,
     OLED_ROTATION_180 = 2,
-    OLED_ROTATION_270 = 3, // OLED_ROTATION_90 | OLED_ROTATION_180
+    OLED_ROTATION_270 = 3,  // OLED_ROTATION_90 | OLED_ROTATION_180
 } oled_rotation_t;
 
 // Initialize the oled display, rotating the rendered output based on the define passed in.
@@ -200,15 +204,15 @@ void oled_write_P(const char *data, bool invert);
 // Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM
 void oled_write_ln_P(const char *data, bool invert);
 #else
-  // Writes a string to the buffer at current cursor position
-  // Advances the cursor while writing, inverts the pixels if true
-  #define oled_write_P(data, invert) oled_write(data, invert)
-
-  // Writes a string to the buffer at current cursor position
-  // Advances the cursor while writing, inverts the pixels if true
-  // Advances the cursor to the next page, wiring ' ' to the remainder of the current page
-  #define oled_write_ln_P(data, invert) oled_write(data, invert)
-#endif // defined(__AVR__)
+// Writes a string to the buffer at current cursor position
+// Advances the cursor while writing, inverts the pixels if true
+#    define oled_write_P(data, invert) oled_write(data, invert)
+
+// Writes a string to the buffer at current cursor position
+// Advances the cursor while writing, inverts the pixels if true
+// Advances the cursor to the next page, wiring ' ' to the remainder of the current page
+#    define oled_write_ln_P(data, invert) oled_write(data, invert)
+#endif  // defined(__AVR__)
 
 // Can be used to manually turn on the screen if it is off
 // Returns true if the screen was on or turns on

drivers/qwiic/micro_oled.h

@@ -49,86 +49,86 @@ void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t
 void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
 void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
 void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font);
-void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font);
+void draw_string(uint8_t x, uint8_t y, char* string, uint8_t color, uint8_t mode, uint8_t font);
 
 #define I2C_ADDRESS_SA0_0 0b0111100
 #ifndef I2C_ADDRESS_SA0_1
-#define I2C_ADDRESS_SA0_1 0b0111101
+#    define I2C_ADDRESS_SA0_1 0b0111101
 #endif
 #define I2C_COMMAND 0x00
 #define I2C_DATA 0x40
 #define PIXEL_OFF 0
-#define PIXEL_ON  1
+#define PIXEL_ON 1
 
 #ifndef LCDWIDTH
-#define LCDWIDTH      64
+#    define LCDWIDTH 64
 #endif
 #ifndef LCDWIDTH
-#define LCDHEIGHT     48
+#    define LCDHEIGHT 48
 #endif
-#define FONTHEADERSIZE    6
+#define FONTHEADERSIZE 6
 
-#define NORM        0
-#define XOR         1
+#define NORM 0
+#define XOR 1
 
-#define PAGE        0
-#define ALL         1
+#define PAGE 0
+#define ALL 1
 
-#define WIDGETSTYLE0      0
-#define WIDGETSTYLE1      1
-#define WIDGETSTYLE2      2
+#define WIDGETSTYLE0 0
+#define WIDGETSTYLE1 1
+#define WIDGETSTYLE2 2
 
-#define SETCONTRAST     0x81
-#define DISPLAYALLONRESUME  0xA4
-#define DISPLAYALLON    0xA5
-#define NORMALDISPLAY     0xA6
-#define INVERTDISPLAY     0xA7
-#define DISPLAYOFF      0xAE
-#define DISPLAYON       0xAF
-#define SETDISPLAYOFFSET  0xD3
-#define SETCOMPINS      0xDA
-#define SETVCOMDESELECT   0xDB
-#define SETDISPLAYCLOCKDIV  0xD5
-#define SETPRECHARGE    0xD9
-#define SETMULTIPLEX    0xA8
-#define SETLOWCOLUMN    0x00
-#define SETHIGHCOLUMN     0x10
-#define SETSTARTLINE    0x40
-#define MEMORYMODE      0x20
-#define COMSCANINC      0xC0
-#define COMSCANDEC      0xC8
-#define SEGREMAP      0xA0
-#define CHARGEPUMP      0x8D
-#define EXTERNALVCC     0x01
-#define SWITCHCAPVCC    0x02
+#define SETCONTRAST 0x81
+#define DISPLAYALLONRESUME 0xA4
+#define DISPLAYALLON 0xA5
+#define NORMALDISPLAY 0xA6
+#define INVERTDISPLAY 0xA7
+#define DISPLAYOFF 0xAE
+#define DISPLAYON 0xAF
+#define SETDISPLAYOFFSET 0xD3
+#define SETCOMPINS 0xDA
+#define SETVCOMDESELECT 0xDB
+#define SETDISPLAYCLOCKDIV 0xD5
+#define SETPRECHARGE 0xD9
+#define SETMULTIPLEX 0xA8
+#define SETLOWCOLUMN 0x00
+#define SETHIGHCOLUMN 0x10
+#define SETSTARTLINE 0x40
+#define MEMORYMODE 0x20
+#define COMSCANINC 0xC0
+#define COMSCANDEC 0xC8
+#define SEGREMAP 0xA0
+#define CHARGEPUMP 0x8D
+#define EXTERNALVCC 0x01
+#define SWITCHCAPVCC 0x02
 
 // Scroll
-#define ACTIVATESCROLL          0x2F
-#define DEACTIVATESCROLL        0x2E
-#define SETVERTICALSCROLLAREA       0xA3
-#define RIGHTHORIZONTALSCROLL       0x26
-#define LEFT_HORIZONTALSCROLL       0x27
+#define ACTIVATESCROLL 0x2F
+#define DEACTIVATESCROLL 0x2E
+#define SETVERTICALSCROLLAREA 0xA3
+#define RIGHTHORIZONTALSCROLL 0x26
+#define LEFT_HORIZONTALSCROLL 0x27
 #define VERTICALRIGHTHORIZONTALSCROLL 0x29
-#define VERTICALLEFTHORIZONTALSCROLL  0x2A
+#define VERTICALLEFTHORIZONTALSCROLL 0x2A
 
 typedef enum CMD {
-  CMD_CLEAR,      //0
-  CMD_INVERT,     //1
-  CMD_CONTRAST,   //2
-  CMD_DISPLAY,    //3
-  CMD_SETCURSOR,    //4
-  CMD_PIXEL,      //5
-  CMD_LINE,     //6
-  CMD_LINEH,      //7
-  CMD_LINEV,      //8
-  CMD_RECT,     //9
-  CMD_RECTFILL,   //10
-  CMD_CIRCLE,     //11
-  CMD_CIRCLEFILL,   //12
-  CMD_DRAWCHAR,   //13
-  CMD_DRAWBITMAP,   //14
-  CMD_GETLCDWIDTH,  //15
-  CMD_GETLCDHEIGHT, //16
-  CMD_SETCOLOR,   //17
-  CMD_SETDRAWMODE   //18
+    CMD_CLEAR,         // 0
+    CMD_INVERT,        // 1
+    CMD_CONTRAST,      // 2
+    CMD_DISPLAY,       // 3
+    CMD_SETCURSOR,     // 4
+    CMD_PIXEL,         // 5
+    CMD_LINE,          // 6
+    CMD_LINEH,         // 7
+    CMD_LINEV,         // 8
+    CMD_RECT,          // 9
+    CMD_RECTFILL,      // 10
+    CMD_CIRCLE,        // 11
+    CMD_CIRCLEFILL,    // 12
+    CMD_DRAWCHAR,      // 13
+    CMD_DRAWBITMAP,    // 14
+    CMD_GETLCDWIDTH,   // 15
+    CMD_GETLCDHEIGHT,  // 16
+    CMD_SETCOLOR,      // 17
+    CMD_SETDRAWMODE    // 18
 } commCommand_t;

drivers/qwiic/qwiic.c

@@ -16,16 +16,16 @@
 #include "qwiic.h"
 
 void qwiic_init(void) {
-  #ifdef QWIIC_JOYSTIIC_ENABLE
+#ifdef QWIIC_JOYSTIIC_ENABLE
     joystiic_init();
-  #endif
-  #ifdef QWIIC_MICRO_OLED_ENABLE
+#endif
+#ifdef QWIIC_MICRO_OLED_ENABLE
     micro_oled_init();
-  #endif
+#endif
 }
 
 void qwiic_task(void) {
-  #ifdef QWIIC_JOYSTIIC_ENABLE
+#ifdef QWIIC_JOYSTIIC_ENABLE
     joystiic_task();
-  #endif
+#endif
 }

drivers/qwiic/qwiic.h

@@ -18,10 +18,10 @@
 #include "i2c_master.h"
 
 #ifdef QWIIC_JOYSTIIC_ENABLE
-  #include "joystiic.h"
+#    include "joystiic.h"
 #endif
 #ifdef QWIIC_MICRO_OLED_ENABLE
-  #include "micro_oled.h"
+#    include "micro_oled.h"
 #endif
 
 void qwiic_init(void);

drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h

@@ -19,54 +19,53 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define _GDISP_LLD_BOARD_H
 
 static const I2CConfig i2ccfg = {
-  400000 // clock speed (Hz); 400kHz max for IS31
+    400000  // clock speed (Hz); 400kHz max for IS31
 };
 
 static const uint8_t led_mask[] = {
-	0xFF, 0x00, /* C1-1 -> C1-16 */
-	0xFF, 0x00, /* C2-1 -> C2-16 */
-	0xFF, 0x00, /* C3-1 -> C3-16 */
-	0xFF, 0x00, /* C4-1 -> C4-16 */
-	0x3F, 0x00, /* C5-1 -> C5-16 */
-	0x00, 0x00, /* C6-1 -> C6-16 */
-	0x00, 0x00, /* C7-1 -> C7-16 */
-	0x00, 0x00, /* C8-1 -> C8-16 */
-	0x00, 0x00, /* C9-1 -> C9-16 */
+    0xFF, 0x00, /* C1-1 -> C1-16 */
+    0xFF, 0x00, /* C2-1 -> C2-16 */
+    0xFF, 0x00, /* C3-1 -> C3-16 */
+    0xFF, 0x00, /* C4-1 -> C4-16 */
+    0x3F, 0x00, /* C5-1 -> C5-16 */
+    0x00, 0x00, /* C6-1 -> C6-16 */
+    0x00, 0x00, /* C7-1 -> C7-16 */
+    0x00, 0x00, /* C8-1 -> C8-16 */
+    0x00, 0x00, /* C9-1 -> C9-16 */
 };
 
 // The address of the LED
-#define LA(c, r) (c + r * 16 )
+#define LA(c, r) (c + r * 16)
 // Need to be an address that is not mapped, but inside the range of the controller matrix
 #define NA LA(8, 8)
 
 // The numbers in the comments are the led numbers DXX on the PCB
 // The mapping is taken from the schematic of left hand side
 static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
-//   45        44        43        42        41        40        39
-   { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
-//   52        51        50        49        48        47        46
-   { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
-//   58        57        56        55        54        53        N/A
-   { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
-//   67        66        65        64        63        62        61
-   { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
-//   76        75        74        73        72        60        59
-   { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
-//   N/A       N/A       N/A       N/A       N/A       N/A       68
-   { NA,       NA,       NA,       NA,       NA,       NA,       LA(5, 4) },
-//   N/A       N/A       N/A       N/A       71        70        69
-   { NA,       NA,       NA,       NA,       LA(6, 2), LA(6, 1), LA(6, 0) },
+    //   45        44        43        42        41        40        39
+    {LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
+    //   52        51        50        49        48        47        46
+    {LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2)},
+    //   58        57        56        55        54        53        N/A
+    {LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA},
+    //   67        66        65        64        63        62        61
+    {LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2)},
+    //   76        75        74        73        72        60        59
+    {LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0)},
+    //   N/A       N/A       N/A       N/A       N/A       N/A       68
+    {NA, NA, NA, NA, NA, NA, LA(5, 4)},
+    //   N/A       N/A       N/A       N/A       71        70        69
+    {NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0)},
 };
 
-
-#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_ADDR_DEFAULT 0x74  // AD connected to GND
 #define IS31_TIMEOUT 5000
 
-static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
+static GFXINLINE void init_board(GDisplay* g) {
+    (void)g;
     /* I2C pins */
-    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
-    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2);  // PTB0/I2C0/SCL
+    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2);  // PTB1/I2C0/SDA
     palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
     palClearPad(GPIOB, 16);
     /* start I2C */
@@ -77,34 +76,30 @@ static GFXINLINE void init_board(GDisplay *g) {
     I2CD1.i2c->FLT = 4;
 }
 
-static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
-}
+static GFXINLINE void post_init_board(GDisplay* g) { (void)g; }
 
 static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
-    (void) g;
+    (void)g;
     return led_mask;
 }
 
-static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
-{
-    (void) g;
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) {
+    (void)g;
     return led_mapping[y][x];
 }
 
 static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
-    (void) g;
-    if(!shutdown) {
+    (void)g;
+    if (!shutdown) {
         palSetPad(GPIOB, 16);
-    }
-    else {
+    } else {
         palClearPad(GPIOB, 16);
     }
 }
 
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
-	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+static GFXINLINE void write_data(GDisplay* g, uint8_t* data, uint16_t length) {
+    (void)g;
+    i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
 }
 
 #endif /* _GDISP_LLD_BOARD_H */

drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c

@@ -19,15 +19,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #if GFX_USE_GDISP
 
-#define GDISP_DRIVER_VMT          GDISPVMT_IS31FL3731C_QMK
-#define GDISP_SCREEN_HEIGHT       LED_HEIGHT
-#define GDISP_SCREEN_WIDTH        LED_WIDTH
+#    define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_QMK
+#    define GDISP_SCREEN_HEIGHT LED_HEIGHT
+#    define GDISP_SCREEN_WIDTH LED_WIDTH
 
-#include "gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_is31fl3731c.h"
+#    include "gdisp_lld_config.h"
+#    include "src/gdisp/gdisp_driver.h"
 
+#    include "board_is31fl3731c.h"
 
 // Can't include led_tables from here
 extern const uint8_t CIE1931_CURVE[];
@@ -36,96 +35,96 @@ extern const uint8_t CIE1931_CURVE[];
 /* Driver local definitions.                                                 */
 /*===========================================================================*/
 
-#ifndef GDISP_INITIAL_CONTRAST
-    #define GDISP_INITIAL_CONTRAST    0
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-    #define GDISP_INITIAL_BACKLIGHT   0
-#endif
+#    ifndef GDISP_INITIAL_CONTRAST
+#        define GDISP_INITIAL_CONTRAST 0
+#    endif
+#    ifndef GDISP_INITIAL_BACKLIGHT
+#        define GDISP_INITIAL_BACKLIGHT 0
+#    endif
 
-#define GDISP_FLG_NEEDFLUSH           (GDISP_FLG_DRIVER<<0)
+#    define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER << 0)
 
-#define IS31_ADDR_DEFAULT 0x74
+#    define IS31_ADDR_DEFAULT 0x74
 
-#define IS31_REG_CONFIG   0x00
+#    define IS31_REG_CONFIG 0x00
 // bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE   0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE  0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
+#    define IS31_REG_CONFIG_PICTUREMODE 0x00
+#    define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
+#    define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
 // D2:D0 bits are starting frame for autoplay mode
 
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
+#    define IS31_REG_PICTDISP 0x01  // D2:D0 frame select for picture mode
 
-#define IS31_REG_AUTOPLAYCTRL1 0x02
+#    define IS31_REG_AUTOPLAYCTRL1 0x02
 // D6:D4 number of loops (000=infty)
 // D2:D0 number of frames to be used
 
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
+#    define IS31_REG_AUTOPLAYCTRL2 0x03  // D5:D0 delay time (*11ms)
 
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
+#    define IS31_REG_DISPLAYOPT 0x05
+#    define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20  // same intensity for all frames
+#    define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
 // D2:D0 bits blink period time (*0.27s)
 
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
+#    define IS31_REG_AUDIOSYNC 0x06
+#    define IS31_REG_AUDIOSYNC_ENABLE 0x1
 
-#define IS31_REG_FRAMESTATE 0x07
+#    define IS31_REG_FRAMESTATE 0x07
 
-#define IS31_REG_BREATHCTRL1 0x08
+#    define IS31_REG_BREATHCTRL1 0x08
 // D6:D4 fade out time (26ms*2^i)
 // D2:D0 fade in time (26ms*2^i)
 
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
+#    define IS31_REG_BREATHCTRL2 0x09
+#    define IS31_REG_BREATHCTRL2_ENABLE 0x10
 // D2:D0 extinguish time (3.5ms*2^i)
 
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x0
-#define IS31_REG_SHUTDOWN_ON 0x1
+#    define IS31_REG_SHUTDOWN 0x0A
+#    define IS31_REG_SHUTDOWN_OFF 0x0
+#    define IS31_REG_SHUTDOWN_ON 0x1
 
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
+#    define IS31_REG_AGCCTRL 0x0B
+#    define IS31_REG_ADCRATE 0x0C
 
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-#define IS31_FUNCTIONREG_SIZE 0xD
+#    define IS31_COMMANDREGISTER 0xFD
+#    define IS31_FUNCTIONREG 0x0B  // helpfully called 'page nine'
+#    define IS31_FUNCTIONREG_SIZE 0xD
 
-#define IS31_FRAME_SIZE 0xB4
+#    define IS31_FRAME_SIZE 0xB4
 
-#define IS31_PWM_REG 0x24
-#define IS31_PWM_SIZE 0x90
+#    define IS31_PWM_REG 0x24
+#    define IS31_PWM_SIZE 0x90
 
-#define IS31_LED_MASK_SIZE 0x12
+#    define IS31_LED_MASK_SIZE 0x12
 
-#define IS31
+#    define IS31
 
 /*===========================================================================*/
 /* Driver local functions.                                                   */
 /*===========================================================================*/
 
-typedef struct{
+typedef struct {
     uint8_t write_buffer_offset;
     uint8_t write_buffer[IS31_FRAME_SIZE];
     uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
     uint8_t page;
-}__attribute__((__packed__)) PrivData;
+} __attribute__((__packed__)) PrivData;
 
 // Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
+#    define PRIV(g) ((PrivData *)g->priv)
 
 /*===========================================================================*/
 /* Driver exported functions.                                                */
 /*===========================================================================*/
 
-static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
+static GFXINLINE void write_page(GDisplay *g, uint8_t page) {
     uint8_t tx[2] __attribute__((aligned(2)));
     tx[0] = IS31_COMMANDREGISTER;
     tx[1] = page;
     write_data(g, tx, 2);
 }
 
-static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
+static GFXINLINE void write_register(GDisplay *g, uint8_t page, uint8_t reg, uint8_t data) {
     uint8_t tx[2] __attribute__((aligned(2)));
     tx[0] = reg;
     tx[1] = data;
@@ -136,7 +135,7 @@ static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uin
 static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
     PRIV(g)->write_buffer_offset = offset;
     write_page(g, page);
-    write_data(g, (uint8_t*)PRIV(g), length + 1);
+    write_data(g, (uint8_t *)PRIV(g), length + 1);
 }
 
 LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
@@ -160,10 +159,9 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
     gfxSleepMilliseconds(10);
 
-
     // zero all LED registers on all 8 pages, and enable the mask
     __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
-    for(uint8_t i=0; i<8; i++) {
+    for (uint8_t i = 0; i < 8; i++) {
         write_ram(g, i, 0, IS31_FRAME_SIZE);
         gfxSleepMilliseconds(1);
     }
@@ -176,133 +174,129 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     post_init_board(g);
 
     /* Initialise the GDISP structure */
-    g->g.Width = GDISP_SCREEN_WIDTH;
-    g->g.Height = GDISP_SCREEN_HEIGHT;
+    g->g.Width       = GDISP_SCREEN_WIDTH;
+    g->g.Height      = GDISP_SCREEN_HEIGHT;
     g->g.Orientation = GDISP_ROTATE_0;
-    g->g.Powermode = powerOff;
-    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-    g->g.Contrast = GDISP_INITIAL_CONTRAST;
+    g->g.Powermode   = powerOff;
+    g->g.Backlight   = GDISP_INITIAL_BACKLIGHT;
+    g->g.Contrast    = GDISP_INITIAL_CONTRAST;
     return TRUE;
 }
 
-#if GDISP_HARDWARE_FLUSH
-    LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-        // Don't flush if we don't need it.
-        if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-            return;
-
-        PRIV(g)->page++;
-        PRIV(g)->page %= 2;
-        // TODO: some smarter algorithm for this
-        // We should run only one physical page at a time
-        // This way we don't need to send so much data, and
-        // we could use slightly less memory
-        uint8_t* src = PRIV(g)->frame_buffer;
-        for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
-            for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
-                uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
-                PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
-                ++src;
-            }
+#    if GDISP_HARDWARE_FLUSH
+LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+    // Don't flush if we don't need it.
+    if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return;
+
+    PRIV(g)->page++;
+    PRIV(g)->page %= 2;
+    // TODO: some smarter algorithm for this
+    // We should run only one physical page at a time
+    // This way we don't need to send so much data, and
+    // we could use slightly less memory
+    uint8_t *src = PRIV(g)->frame_buffer;
+    for (int y = 0; y < GDISP_SCREEN_HEIGHT; y++) {
+        for (int x = 0; x < GDISP_SCREEN_WIDTH; x++) {
+            uint8_t val                                     = (uint16_t)*src * g->g.Backlight / 100;
+            PRIV(g)->write_buffer[get_led_address(g, x, y)] = CIE1931_CURVE[val];
+            ++src;
         }
-        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
-        gfxSleepMilliseconds(1);
-        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
-
-        g->flags &= ~GDISP_FLG_NEEDFLUSH;
     }
-#endif
+    write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
+    gfxSleepMilliseconds(1);
+    write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
 
-#if GDISP_HARDWARE_DRAWPIXEL
-    LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-        coord_t        x, y;
+    g->flags &= ~GDISP_FLG_NEEDFLUSH;
+}
+#    endif
 
-        switch(g->g.Orientation) {
+#    if GDISP_HARDWARE_DRAWPIXEL
+LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+    coord_t x, y;
+
+    switch (g->g.Orientation) {
         default:
         case GDISP_ROTATE_0:
             x = g->p.x;
             y = g->p.y;
             break;
         case GDISP_ROTATE_180:
-            x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
             y = g->p.y;
             break;
-        }
-        PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
-        g->flags |= GDISP_FLG_NEEDFLUSH;
     }
-#endif
+    PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
+    g->flags |= GDISP_FLG_NEEDFLUSH;
+}
+#    endif
 
-#if GDISP_HARDWARE_PIXELREAD
-    LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-        coord_t        x, y;
+#    if GDISP_HARDWARE_PIXELREAD
+LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+    coord_t x, y;
 
-        switch(g->g.Orientation) {
+    switch (g->g.Orientation) {
         default:
         case GDISP_ROTATE_0:
             x = g->p.x;
             y = g->p.y;
             break;
         case GDISP_ROTATE_180:
-            x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
             y = g->p.y;
             break;
-        }
-        return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
     }
-#endif
+    return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
+}
+#    endif
 
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-    LLDSPEC void gdisp_lld_control(GDisplay *g) {
-        switch(g->p.x) {
+#    if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+LLDSPEC void gdisp_lld_control(GDisplay *g) {
+    switch (g->p.x) {
         case GDISP_CONTROL_POWER:
-            if (g->g.Powermode == (powermode_t)g->p.ptr)
-                return;
-            switch((powermode_t)g->p.ptr) {
-            case powerOff:
-            case powerSleep:
-            case powerDeepSleep:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-                break;
-            case powerOn:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-                break;
-            default:
-                return;
+            if (g->g.Powermode == (powermode_t)g->p.ptr) return;
+            switch ((powermode_t)g->p.ptr) {
+                case powerOff:
+                case powerSleep:
+                case powerDeepSleep:
+                    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+                    break;
+                case powerOn:
+                    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+                    break;
+                default:
+                    return;
             }
             g->g.Powermode = (powermode_t)g->p.ptr;
             return;
 
         case GDISP_CONTROL_ORIENTATION:
-            if (g->g.Orientation == (orientation_t)g->p.ptr)
-                return;
-            switch((orientation_t)g->p.ptr) {
-            /* Rotation is handled by the drawing routines */
-            case GDISP_ROTATE_0:
-            case GDISP_ROTATE_180:
-                g->g.Height = GDISP_SCREEN_HEIGHT;
-                g->g.Width = GDISP_SCREEN_WIDTH;
-                break;
-            case GDISP_ROTATE_90:
-            case GDISP_ROTATE_270:
-                g->g.Height = GDISP_SCREEN_WIDTH;
-                g->g.Width = GDISP_SCREEN_HEIGHT;
-                break;
-            default:
-                return;
+            if (g->g.Orientation == (orientation_t)g->p.ptr) return;
+            switch ((orientation_t)g->p.ptr) {
+                /* Rotation is handled by the drawing routines */
+                case GDISP_ROTATE_0:
+                case GDISP_ROTATE_180:
+                    g->g.Height = GDISP_SCREEN_HEIGHT;
+                    g->g.Width  = GDISP_SCREEN_WIDTH;
+                    break;
+                case GDISP_ROTATE_90:
+                case GDISP_ROTATE_270:
+                    g->g.Height = GDISP_SCREEN_WIDTH;
+                    g->g.Width  = GDISP_SCREEN_HEIGHT;
+                    break;
+                default:
+                    return;
             }
             g->g.Orientation = (orientation_t)g->p.ptr;
             return;
 
         case GDISP_CONTROL_BACKLIGHT:
-            if (g->g.Backlight == (unsigned)g->p.ptr)
-                return;
-            unsigned val = (unsigned)g->p.ptr;
+            if (g->g.Backlight == (unsigned)g->p.ptr) return;
+            unsigned val   = (unsigned)g->p.ptr;
             g->g.Backlight = val > 100 ? 100 : val;
             g->flags |= GDISP_FLG_NEEDFLUSH;
             return;
-        }
     }
-#endif // GDISP_NEED_CONTROL
+}
+#    endif  // GDISP_NEED_CONTROL
 
-#endif // GFX_USE_GDISP
+#endif  // GFX_USE_GDISP

drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h

@@ -24,13 +24,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Driver hardware support.                                                  */
 /*===========================================================================*/
 
-#define GDISP_HARDWARE_FLUSH            TRUE        // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL        TRUE
-#define GDISP_HARDWARE_PIXELREAD        TRUE
-#define GDISP_HARDWARE_CONTROL          TRUE
+#    define GDISP_HARDWARE_FLUSH TRUE  // This controller requires flushing
+#    define GDISP_HARDWARE_DRAWPIXEL TRUE
+#    define GDISP_HARDWARE_PIXELREAD TRUE
+#    define GDISP_HARDWARE_CONTROL TRUE
 
-#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_GRAY256
+#    define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256
 
-#endif    /* GFX_USE_GDISP */
+#endif /* GFX_USE_GDISP */
 
-#endif    /* _GDISP_LLD_CONFIG_H */
+#endif /* _GDISP_LLD_CONFIG_H */

drivers/ugfx/gdisp/st7565/board_st7565_template.h

@@ -8,10 +8,10 @@
 #ifndef _GDISP_LLD_BOARD_H
 #define _GDISP_LLD_BOARD_H
 
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER       0,1,2,3
+#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9  // actually 6
+#define ST7565_ADC ST7565_ADC_NORMAL
+#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
+#define ST7565_PAGE_ORDER 0, 1, 2, 3
 /*
  * Custom page order for several LCD boards, e.g. HEM12864-99
  * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
@@ -25,11 +25,9 @@
 #define ST7565_SLCK_PIN 5
 #define ST7565_SS_PIN 4
 
-#define palSetPadModeRaw(portname, bits) \
-    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+#define palSetPadModeRaw(portname, bits) ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
 
-#define palSetPadModeNamed(portname, portmode) \
-    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+#define palSetPadModeNamed(portname, portmode) palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
 
 #define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
 // DSPI Clock and Transfer Attributes
@@ -37,38 +35,37 @@
 // MSB First
 // CLK Low by default
 static const SPIConfig spi1config = {
-   // Operation complete callback or @p NULL.
-  .end_cb = NULL,
-   //The chip select line port - when not using pcs.
-  .ssport = ST7565_GPIOPORT,
-   // brief The chip select line pad number - when not using pcs.
-  .sspad=ST7565_SS_PIN,
-   // SPI initialization data.
-  .tar0 =
-    SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
-    | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
-    | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
-    | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
-    | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
-    | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
+    // Operation complete callback or @p NULL.
+    .end_cb = NULL,
+    // The chip select line port - when not using pcs.
+    .ssport = ST7565_GPIOPORT,
+    // brief The chip select line pad number - when not using pcs.
+    .sspad = ST7565_SS_PIN,
+    // SPI initialization data.
+    .tar0 = SPIx_CTARn_FMSZ(7)     // Frame size = 8 bytes
+            | SPIx_CTARn_ASC(1)    // After SCK Delay Scaler (min 50 ns) = 55.56ns
+            | SPIx_CTARn_DT(0)     // Delay After Transfer Scaler (no minimum)= 27.78ns
+            | SPIx_CTARn_CSSCK(0)  // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
+            | SPIx_CTARn_PBR(0)    // Baud Rate Prescaler = 2
+            | SPIx_CTARn_BR(0)     // Baud rate (min 50ns) = 55.56ns
 };
 
 static GFXINLINE void acquire_bus(GDisplay *g) {
-    (void) g;
+    (void)g;
     // Only the LCD is using the SPI bus, so no need to acquire
     // spiAcquireBus(&SPID1);
     spiSelect(&SPID1);
 }
 
 static GFXINLINE void release_bus(GDisplay *g) {
-    (void) g;
+    (void)g;
     // Only the LCD is using the SPI bus, so no need to release
-    //spiReleaseBus(&SPID1);
+    // spiReleaseBus(&SPID1);
     spiUnselect(&SPID1);
 }
 
 static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
+    (void)g;
     palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
     palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
     palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
@@ -82,31 +79,23 @@ static GFXINLINE void init_board(GDisplay *g) {
     release_bus(g);
 }
 
-static GFXINLINE void post_init_board(GDisplay *g) {
-    (void) g;
-}
+static GFXINLINE void post_init_board(GDisplay *g) { (void)g; }
 
 static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
-    (void) g;
+    (void)g;
     if (state) {
         palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    }
-    else {
+    } else {
         palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
     }
 }
 
-static GFXINLINE void enter_data_mode(GDisplay *g) {
-    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-static GFXINLINE void enter_cmd_mode(GDisplay *g) {
-    palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
+static GFXINLINE void enter_data_mode(GDisplay *g) { palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); }
 
+static GFXINLINE void enter_cmd_mode(GDisplay *g) { palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); }
 
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-    (void) g;
+static GFXINLINE void write_data(GDisplay *g, uint8_t *data, uint16_t length) {
+    (void)g;
     spiSend(&SPID1, length, data);
 }
 

drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c

@@ -9,82 +9,89 @@
 
 #if GFX_USE_GDISP
 
-#define GDISP_DRIVER_VMT            GDISPVMT_ST7565_QMK
-#include "gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
+#    define GDISP_DRIVER_VMT GDISPVMT_ST7565_QMK
+#    include "gdisp_lld_config.h"
+#    include "src/gdisp/gdisp_driver.h"
 
-#include "board_st7565.h"
+#    include "board_st7565.h"
 
 /*===========================================================================*/
 /* Driver local definitions.                                                 */
 /*===========================================================================*/
 
-#ifndef GDISP_SCREEN_HEIGHT
-#define GDISP_SCREEN_HEIGHT         LCD_HEIGHT
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-#define GDISP_SCREEN_WIDTH          LCD_WIDTH
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-#define GDISP_INITIAL_CONTRAST      35
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-#define GDISP_INITIAL_BACKLIGHT     100
-#endif
+#    ifndef GDISP_SCREEN_HEIGHT
+#        define GDISP_SCREEN_HEIGHT LCD_HEIGHT
+#    endif
+#    ifndef GDISP_SCREEN_WIDTH
+#        define GDISP_SCREEN_WIDTH LCD_WIDTH
+#    endif
+#    ifndef GDISP_INITIAL_CONTRAST
+#        define GDISP_INITIAL_CONTRAST 35
+#    endif
+#    ifndef GDISP_INITIAL_BACKLIGHT
+#        define GDISP_INITIAL_BACKLIGHT 100
+#    endif
 
-#define GDISP_FLG_NEEDFLUSH         (GDISP_FLG_DRIVER<<0)
+#    define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER << 0)
 
-#include "st7565.h"
+#    include "st7565.h"
 
 /*===========================================================================*/
 /* Driver config defaults for backward compatibility.                        */
 /*===========================================================================*/
-#ifndef ST7565_LCD_BIAS
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
-#endif
-#ifndef ST7565_ADC
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#endif
-#ifndef ST7565_COM_SCAN
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_INC
-#endif
-#ifndef ST7565_PAGE_ORDER
-#define ST7565_PAGE_ORDER       0,1,2,3
-#endif
+#    ifndef ST7565_LCD_BIAS
+#        define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
+#    endif
+#    ifndef ST7565_ADC
+#        define ST7565_ADC ST7565_ADC_NORMAL
+#    endif
+#    ifndef ST7565_COM_SCAN
+#        define ST7565_COM_SCAN ST7565_COM_SCAN_INC
+#    endif
+#    ifndef ST7565_PAGE_ORDER
+#        define ST7565_PAGE_ORDER 0, 1, 2, 3
+#    endif
 
 /*===========================================================================*/
 /* Driver local functions.                                                   */
 /*===========================================================================*/
 
-typedef struct{
-    bool_t buffer2;
+typedef struct {
+    bool_t  buffer2;
     uint8_t data_pos;
     uint8_t data[16];
     uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
-}PrivData;
+} PrivData;
 
 // Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-#define RAM(g)                          (PRIV(g)->ram)
+#    define PRIV(g) ((PrivData *)g->priv)
+#    define RAM(g) (PRIV(g)->ram)
 
-static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
-    PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
-}
+static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) { PRIV(g)->data[PRIV(g)->data_pos++] = cmd; }
 
-static GFXINLINE void flush_cmd(GDisplay* g) {
+static GFXINLINE void flush_cmd(GDisplay *g) {
     write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
     PRIV(g)->data_pos = 0;
 }
 
-#define write_cmd2(g, cmd1, cmd2)        { write_cmd(g, cmd1); write_cmd(g, cmd2); }
-#define write_cmd3(g, cmd1, cmd2, cmd3)  { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
+#    define write_cmd2(g, cmd1, cmd2) \
+        {                             \
+            write_cmd(g, cmd1);       \
+            write_cmd(g, cmd2);       \
+        }
+#    define write_cmd3(g, cmd1, cmd2, cmd3) \
+        {                                   \
+            write_cmd(g, cmd1);             \
+            write_cmd(g, cmd2);             \
+            write_cmd(g, cmd3);             \
+        }
 
 // Some common routines and macros
-#define delay(us)           gfxSleepMicroseconds(us)
-#define delay_ms(ms)        gfxSleepMilliseconds(ms)
+#    define delay(us) gfxSleepMicroseconds(us)
+#    define delay_ms(ms) gfxSleepMilliseconds(ms)
 
-#define xyaddr(x, y)        ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
-#define xybit(y)            (1<<((y)&7))
+#    define xyaddr(x, y) ((x) + ((y) >> 3) * GDISP_SCREEN_WIDTH)
+#    define xybit(y) (1 << ((y)&7))
 
 /*===========================================================================*/
 /* Driver exported functions.                                                */
@@ -99,8 +106,8 @@ static GFXINLINE void flush_cmd(GDisplay* g) {
 
 LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     // The private area is the display surface.
-    g->priv = gfxAlloc(sizeof(PrivData));
-    PRIV(g)->buffer2 = false;
+    g->priv           = gfxAlloc(sizeof(PrivData));
+    PRIV(g)->buffer2  = false;
     PRIV(g)->data_pos = 0;
 
     // Initialise the board interface
@@ -139,22 +146,21 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     release_bus(g);
 
     /* Initialise the GDISP structure */
-    g->g.Width = GDISP_SCREEN_WIDTH;
-    g->g.Height = GDISP_SCREEN_HEIGHT;
+    g->g.Width       = GDISP_SCREEN_WIDTH;
+    g->g.Height      = GDISP_SCREEN_HEIGHT;
     g->g.Orientation = GDISP_ROTATE_0;
-    g->g.Powermode = powerOff;
-    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-    g->g.Contrast = GDISP_INITIAL_CONTRAST;
+    g->g.Powermode   = powerOff;
+    g->g.Backlight   = GDISP_INITIAL_BACKLIGHT;
+    g->g.Contrast    = GDISP_INITIAL_CONTRAST;
     return TRUE;
 }
 
-#if GDISP_HARDWARE_FLUSH
+#    if GDISP_HARDWARE_FLUSH
 LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-    unsigned    p;
+    unsigned p;
 
     // Don't flush if we don't need it.
-    if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-        return;
+    if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return;
 
     acquire_bus(g);
     enter_cmd_mode(g);
@@ -166,7 +172,7 @@ LLDSPEC void gdisp_lld_flush(GDisplay *g) {
         write_cmd(g, ST7565_RMW);
         flush_cmd(g);
         enter_data_mode(g);
-        write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
+        write_data(g, RAM(g) + (p * GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
         enter_cmd_mode(g);
     }
     unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
@@ -177,30 +183,30 @@ LLDSPEC void gdisp_lld_flush(GDisplay *g) {
 
     g->flags &= ~GDISP_FLG_NEEDFLUSH;
 }
-#endif
+#    endif
 
-#if GDISP_HARDWARE_DRAWPIXEL
+#    if GDISP_HARDWARE_DRAWPIXEL
 LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-    coord_t        x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
+    coord_t x, y;
+
+    switch (g->g.Orientation) {
+        default:
+        case GDISP_ROTATE_0:
+            x = g->p.x;
+            y = g->p.y;
+            break;
+        case GDISP_ROTATE_90:
+            x = g->p.y;
+            y = GDISP_SCREEN_HEIGHT - 1 - g->p.x;
+            break;
+        case GDISP_ROTATE_180:
+            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
+            y = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
+            break;
+        case GDISP_ROTATE_270:
+            x = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
+            y = g->p.x;
+            break;
     }
     if (gdispColor2Native(g->p.color) != Black)
         RAM(g)[xyaddr(x, y)] |= xybit(y);
@@ -208,53 +214,52 @@ LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
         RAM(g)[xyaddr(x, y)] &= ~xybit(y);
     g->flags |= GDISP_FLG_NEEDFLUSH;
 }
-#endif
+#    endif
 
-#if GDISP_HARDWARE_PIXELREAD
+#    if GDISP_HARDWARE_PIXELREAD
 LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-    coord_t        x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
+    coord_t x, y;
+
+    switch (g->g.Orientation) {
+        default:
+        case GDISP_ROTATE_0:
+            x = g->p.x;
+            y = g->p.y;
+            break;
+        case GDISP_ROTATE_90:
+            x = g->p.y;
+            y = GDISP_SCREEN_HEIGHT - 1 - g->p.x;
+            break;
+        case GDISP_ROTATE_180:
+            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
+            y = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
+            break;
+        case GDISP_ROTATE_270:
+            x = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
+            y = g->p.x;
+            break;
     }
     return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
 }
-#endif
+#    endif
 
 LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
-    uint8_t* buffer = (uint8_t*)g->p.ptr;
-    int linelength = g->p.cx;
+    uint8_t *buffer     = (uint8_t *)g->p.ptr;
+    int      linelength = g->p.cx;
     for (int i = 0; i < g->p.cy; i++) {
-        unsigned dstx = g->p.x;
-        unsigned dsty = g->p.y + i;
-        unsigned srcx = g->p.x1;
-        unsigned srcy = g->p.y1 + i;
+        unsigned dstx   = g->p.x;
+        unsigned dsty   = g->p.y + i;
+        unsigned srcx   = g->p.x1;
+        unsigned srcy   = g->p.y1 + i;
         unsigned srcbit = srcy * g->p.x2 + srcx;
-        for(int j=0; j < linelength; j++) {
-            uint8_t src = buffer[srcbit / 8];
-            uint8_t bit = 7-(srcbit % 8);
-            uint8_t bitset = (src >> bit) & 1;
-            uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
+        for (int j = 0; j < linelength; j++) {
+            uint8_t  src    = buffer[srcbit / 8];
+            uint8_t  bit    = 7 - (srcbit % 8);
+            uint8_t  bitset = (src >> bit) & 1;
+            uint8_t *dst    = &(RAM(g)[xyaddr(dstx, dsty)]);
             if (bitset) {
                 *dst |= xybit(dsty);
-            }
-            else {
+            } else {
                 *dst &= ~xybit(dsty);
             }
             dstx++;
@@ -264,66 +269,64 @@ LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
     g->flags |= GDISP_FLG_NEEDFLUSH;
 }
 
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+#    if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
 LLDSPEC void gdisp_lld_control(GDisplay *g) {
-    switch(g->p.x) {
-    case GDISP_CONTROL_POWER:
-        if (g->g.Powermode == (powermode_t)g->p.ptr)
-            return;
-        switch((powermode_t)g->p.ptr) {
-        case powerOff:
-        case powerSleep:
-        case powerDeepSleep:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_OFF);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        case powerOn:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_ON);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        default:
+    switch (g->p.x) {
+        case GDISP_CONTROL_POWER:
+            if (g->g.Powermode == (powermode_t)g->p.ptr) return;
+            switch ((powermode_t)g->p.ptr) {
+                case powerOff:
+                case powerSleep:
+                case powerDeepSleep:
+                    acquire_bus(g);
+                    enter_cmd_mode(g);
+                    write_cmd(g, ST7565_DISPLAY_OFF);
+                    flush_cmd(g);
+                    release_bus(g);
+                    break;
+                case powerOn:
+                    acquire_bus(g);
+                    enter_cmd_mode(g);
+                    write_cmd(g, ST7565_DISPLAY_ON);
+                    flush_cmd(g);
+                    release_bus(g);
+                    break;
+                default:
+                    return;
+            }
+            g->g.Powermode = (powermode_t)g->p.ptr;
             return;
-        }
-        g->g.Powermode = (powermode_t)g->p.ptr;
-        return;
 
         case GDISP_CONTROL_ORIENTATION:
-            if (g->g.Orientation == (orientation_t)g->p.ptr)
-                return;
-            switch((orientation_t)g->p.ptr) {
-            /* Rotation is handled by the drawing routines */
-            case GDISP_ROTATE_0:
-            case GDISP_ROTATE_180:
-                g->g.Height = GDISP_SCREEN_HEIGHT;
-                g->g.Width = GDISP_SCREEN_WIDTH;
-                break;
-            case GDISP_ROTATE_90:
-            case GDISP_ROTATE_270:
-                g->g.Height = GDISP_SCREEN_WIDTH;
-                g->g.Width = GDISP_SCREEN_HEIGHT;
-                break;
-            default:
-                return;
+            if (g->g.Orientation == (orientation_t)g->p.ptr) return;
+            switch ((orientation_t)g->p.ptr) {
+                /* Rotation is handled by the drawing routines */
+                case GDISP_ROTATE_0:
+                case GDISP_ROTATE_180:
+                    g->g.Height = GDISP_SCREEN_HEIGHT;
+                    g->g.Width  = GDISP_SCREEN_WIDTH;
+                    break;
+                case GDISP_ROTATE_90:
+                case GDISP_ROTATE_270:
+                    g->g.Height = GDISP_SCREEN_WIDTH;
+                    g->g.Width  = GDISP_SCREEN_HEIGHT;
+                    break;
+                default:
+                    return;
             }
             g->g.Orientation = (orientation_t)g->p.ptr;
             return;
 
-            case GDISP_CONTROL_CONTRAST:
-                g->g.Contrast = (unsigned)g->p.ptr & 63;
-                acquire_bus(g);
-                enter_cmd_mode(g);
-                write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
-                flush_cmd(g);
-                release_bus(g);
-                return;
+        case GDISP_CONTROL_CONTRAST:
+            g->g.Contrast = (unsigned)g->p.ptr & 63;
+            acquire_bus(g);
+            enter_cmd_mode(g);
+            write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
+            flush_cmd(g);
+            release_bus(g);
+            return;
     }
 }
-#endif // GDISP_NEED_CONTROL
+#    endif  // GDISP_NEED_CONTROL
 
-#endif // GFX_USE_GDISP
+#endif  // GFX_USE_GDISP

drivers/ugfx/gdisp/st7565/gdisp_lld_config.h

@@ -14,14 +14,14 @@
 /* Driver hardware support.                                                  */
 /*===========================================================================*/
 
-#define GDISP_HARDWARE_FLUSH            TRUE        // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL        TRUE
-#define GDISP_HARDWARE_PIXELREAD        TRUE
-#define GDISP_HARDWARE_CONTROL          TRUE
-#define GDISP_HARDWARE_BITFILLS         TRUE
+#    define GDISP_HARDWARE_FLUSH TRUE  // This controller requires flushing
+#    define GDISP_HARDWARE_DRAWPIXEL TRUE
+#    define GDISP_HARDWARE_PIXELREAD TRUE
+#    define GDISP_HARDWARE_CONTROL TRUE
+#    define GDISP_HARDWARE_BITFILLS TRUE
 
-#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_MONO
+#    define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO
 
-#endif    /* GFX_USE_GDISP */
+#endif /* GFX_USE_GDISP */
 
-#endif    /* _GDISP_LLD_CONFIG_H */
+#endif /* _GDISP_LLD_CONFIG_H */

drivers/ugfx/gdisp/st7565/st7565.h

@@ -8,32 +8,32 @@
 #ifndef _ST7565_H
 #define _ST7565_H
 
-#define ST7565_CONTRAST             0x81
-#define ST7565_ALLON_NORMAL         0xA4
-#define ST7565_ALLON                0xA5
-#define ST7565_POSITIVE_DISPLAY     0xA6
-#define ST7565_INVERT_DISPLAY       0xA7
-#define ST7565_DISPLAY_OFF          0xAE
-#define ST7565_DISPLAY_ON           0xAF
+#define ST7565_CONTRAST 0x81
+#define ST7565_ALLON_NORMAL 0xA4
+#define ST7565_ALLON 0xA5
+#define ST7565_POSITIVE_DISPLAY 0xA6
+#define ST7565_INVERT_DISPLAY 0xA7
+#define ST7565_DISPLAY_OFF 0xAE
+#define ST7565_DISPLAY_ON 0xAF
 
-#define ST7565_LCD_BIAS_7           0xA3
-#define ST7565_LCD_BIAS_9           0xA2
+#define ST7565_LCD_BIAS_7 0xA3
+#define ST7565_LCD_BIAS_9 0xA2
 
-#define ST7565_ADC_NORMAL           0xA0
-#define ST7565_ADC_REVERSE          0xA1
+#define ST7565_ADC_NORMAL 0xA0
+#define ST7565_ADC_REVERSE 0xA1
 
-#define ST7565_COM_SCAN_INC         0xC0
-#define ST7565_COM_SCAN_DEC         0xC8
+#define ST7565_COM_SCAN_INC 0xC0
+#define ST7565_COM_SCAN_DEC 0xC8
 
-#define ST7565_START_LINE           0x40
-#define ST7565_PAGE                 0xB0
-#define ST7565_COLUMN_MSB           0x10
-#define ST7565_COLUMN_LSB           0x00
-#define ST7565_RMW                  0xE0
+#define ST7565_START_LINE 0x40
+#define ST7565_PAGE 0xB0
+#define ST7565_COLUMN_MSB 0x10
+#define ST7565_COLUMN_LSB 0x00
+#define ST7565_RMW 0xE0
 
-#define ST7565_RESISTOR_RATIO       0x20
-#define ST7565_POWER_CONTROL        0x28
+#define ST7565_RESISTOR_RATIO 0x20
+#define ST7565_POWER_CONTROL 0x28
 
-#define ST7565_RESET                0xE2
+#define ST7565_RESET 0xE2
 
 #endif /* _ST7565_H */

quantum/api.c

@@ -17,40 +17,28 @@
 #include "api.h"
 #include "quantum.h"
 
-void dword_to_bytes(uint32_t dword, uint8_t * bytes) {
+void dword_to_bytes(uint32_t dword, uint8_t* bytes) {
     bytes[0] = (dword >> 24) & 0xFF;
-    bytes[1] = (dword >> 16) & 0xFF; 
-    bytes[2] = (dword >> 8) & 0xFF; 
-    bytes[3] = (dword >> 0) & 0xFF; 
+    bytes[1] = (dword >> 16) & 0xFF;
+    bytes[2] = (dword >> 8) & 0xFF;
+    bytes[3] = (dword >> 0) & 0xFF;
 }
 
-uint32_t bytes_to_dword(uint8_t * bytes, uint8_t index) {
-    return ((uint32_t)bytes[index + 0] << 24) | ((uint32_t)bytes[index + 1] << 16) | ((uint32_t)bytes[index + 2] << 8) | (uint32_t)bytes[index + 3];
-}
+uint32_t bytes_to_dword(uint8_t* bytes, uint8_t index) { return ((uint32_t)bytes[index + 0] << 24) | ((uint32_t)bytes[index + 1] << 16) | ((uint32_t)bytes[index + 2] << 8) | (uint32_t)bytes[index + 3]; }
 
-__attribute__ ((weak))
-bool process_api_quantum(uint8_t length, uint8_t * data) {
-    return process_api_keyboard(length, data);
-}
+__attribute__((weak)) bool process_api_quantum(uint8_t length, uint8_t* data) { return process_api_keyboard(length, data); }
 
-__attribute__ ((weak))
-bool process_api_keyboard(uint8_t length, uint8_t * data) {
-    return process_api_user(length, data);
-}
+__attribute__((weak)) bool process_api_keyboard(uint8_t length, uint8_t* data) { return process_api_user(length, data); }
 
-__attribute__ ((weak))
-bool process_api_user(uint8_t length, uint8_t * data) {
-    return true;
-}
+__attribute__((weak)) bool process_api_user(uint8_t length, uint8_t* data) { return true; }
 
-void process_api(uint16_t length, uint8_t * data) {
+void process_api(uint16_t length, uint8_t* data) {
     // SEND_STRING("\nRX: ");
     // for (uint8_t i = 0; i < length; i++) {
     //     send_byte(data[i]);
     //     SEND_STRING(" ");
     // }
-    if (!process_api_quantum(length, data))
-        return;
+    if (!process_api_quantum(length, data)) return;
 
     switch (data[0]) {
         case MT_SET_DATA:
@@ -65,10 +53,10 @@ void process_api(uint16_t length, uint8_t * data) {
                     break;
                 }
                 case DT_RGBLIGHT: {
-                    #ifdef RGBLIGHT_ENABLE
-                        uint32_t rgblight = bytes_to_dword(data, 2);
-                        eeconfig_update_rgblight(rgblight);
-                    #endif
+#ifdef RGBLIGHT_ENABLE
+                    uint32_t rgblight = bytes_to_dword(data, 2);
+                    eeconfig_update_rgblight(rgblight);
+#endif
                     break;
                 }
             }
@@ -79,12 +67,12 @@ void process_api(uint16_t length, uint8_t * data) {
                     break;
                 }
                 case DT_DEBUG: {
-                    uint8_t debug_bytes[1] = { eeprom_read_byte(EECONFIG_DEBUG) };
+                    uint8_t debug_bytes[1] = {eeprom_read_byte(EECONFIG_DEBUG)};
                     MT_GET_DATA_ACK(DT_DEBUG, debug_bytes, 1);
                     break;
                 }
                 case DT_DEFAULT_LAYER: {
-                    uint8_t default_bytes[1] = { eeprom_read_byte(EECONFIG_DEFAULT_LAYER) };
+                    uint8_t default_bytes[1] = {eeprom_read_byte(EECONFIG_DEFAULT_LAYER)};
                     MT_GET_DATA_ACK(DT_DEFAULT_LAYER, default_bytes, 1);
                     break;
                 }
@@ -95,35 +83,35 @@ void process_api(uint16_t length, uint8_t * data) {
                     break;
                 }
                 case DT_AUDIO: {
-                    #ifdef AUDIO_ENABLE
-                        uint8_t audio_bytes[1] = { eeprom_read_byte(EECONFIG_AUDIO) };
-                        MT_GET_DATA_ACK(DT_AUDIO, audio_bytes, 1);
-                    #else
-                        MT_GET_DATA_ACK(DT_AUDIO, NULL, 0);
-                    #endif
+#ifdef AUDIO_ENABLE
+                    uint8_t audio_bytes[1] = {eeprom_read_byte(EECONFIG_AUDIO)};
+                    MT_GET_DATA_ACK(DT_AUDIO, audio_bytes, 1);
+#else
+                    MT_GET_DATA_ACK(DT_AUDIO, NULL, 0);
+#endif
                     break;
                 }
                 case DT_BACKLIGHT: {
-                    #ifdef BACKLIGHT_ENABLE
-                        uint8_t backlight_bytes[1] = { eeprom_read_byte(EECONFIG_BACKLIGHT) };
-                        MT_GET_DATA_ACK(DT_BACKLIGHT, backlight_bytes, 1);
-                    #else
-                        MT_GET_DATA_ACK(DT_BACKLIGHT, NULL, 0);
-                    #endif
+#ifdef BACKLIGHT_ENABLE
+                    uint8_t backlight_bytes[1] = {eeprom_read_byte(EECONFIG_BACKLIGHT)};
+                    MT_GET_DATA_ACK(DT_BACKLIGHT, backlight_bytes, 1);
+#else
+                    MT_GET_DATA_ACK(DT_BACKLIGHT, NULL, 0);
+#endif
                     break;
                 }
                 case DT_RGBLIGHT: {
-                    #ifdef RGBLIGHT_ENABLE
-                        uint8_t rgblight_bytes[4];
-                        dword_to_bytes(eeconfig_read_rgblight(), rgblight_bytes);
-                        MT_GET_DATA_ACK(DT_RGBLIGHT, rgblight_bytes, 4);
-                    #else
-                        MT_GET_DATA_ACK(DT_RGBLIGHT, NULL, 0);
-                    #endif
+#ifdef RGBLIGHT_ENABLE
+                    uint8_t rgblight_bytes[4];
+                    dword_to_bytes(eeconfig_read_rgblight(), rgblight_bytes);
+                    MT_GET_DATA_ACK(DT_RGBLIGHT, rgblight_bytes, 4);
+#else
+                    MT_GET_DATA_ACK(DT_RGBLIGHT, NULL, 0);
+#endif
                     break;
                 }
                 case DT_KEYMAP_OPTIONS: {
-                    uint8_t keymap_bytes[1] = { eeconfig_read_keymap() };
+                    uint8_t keymap_bytes[1] = {eeconfig_read_keymap()};
                     MT_GET_DATA_ACK(DT_KEYMAP_OPTIONS, keymap_bytes, 1);
                     break;
                 }
@@ -172,24 +160,23 @@ void process_api(uint16_t length, uint8_t * data) {
             break;
         case MT_TYPE_ERROR:
             break;
-        default: ; // command not recognised
+        default:;  // command not recognised
             SEND_BYTES(MT_TYPE_ERROR, DT_NONE, data, length);
             break;
 
-        // #ifdef RGBLIGHT_ENABLE
-        // case 0x27: ; // RGB LED functions
-        //     switch (*data++) {
-        //         case 0x00: ; // Update HSV
-        //             rgblight_sethsv((data[0] << 8 | data[1]) % 360, data[2], data[3]);
-        //             break;
-        //         case 0x01: ; // Update RGB
-        //             break;
-        //         case 0x02: ; // Update mode
-        //             rgblight_mode(data[0]);
-        //             break;
-        //     }
-        //     break;
-        // #endif
+            // #ifdef RGBLIGHT_ENABLE
+            // case 0x27: ; // RGB LED functions
+            //     switch (*data++) {
+            //         case 0x00: ; // Update HSV
+            //             rgblight_sethsv((data[0] << 8 | data[1]) % 360, data[2], data[3]);
+            //             break;
+            //         case 0x01: ; // Update RGB
+            //             break;
+            //         case 0x02: ; // Update mode
+            //             rgblight_mode(data[0]);
+            //             break;
+            //     }
+            //     break;
+            // #endif
     }
-
 }

quantum/api.h

@@ -18,41 +18,25 @@
 #define _API_H_
 
 #ifdef __AVR__
-#include "lufa.h"
+#    include "lufa.h"
 #endif
 
 enum MESSAGE_TYPE {
-    MT_GET_DATA =      0x10, // Get data from keyboard
-    MT_GET_DATA_ACK =  0x11, // returned data to process (ACK)
-    MT_SET_DATA =      0x20, // Set data on keyboard
-    MT_SET_DATA_ACK =  0x21, // returned data to confirm (ACK)
-    MT_SEND_DATA =     0x30, // Sending data/action from keyboard
-    MT_SEND_DATA_ACK = 0x31, // returned data/action confirmation (ACK)
-    MT_EXE_ACTION =    0x40, // executing actions on keyboard
-    MT_EXE_ACTION_ACK =0x41, // return confirmation/value (ACK)
-    MT_TYPE_ERROR =    0x80 // type not recognised (ACK)
+    MT_GET_DATA       = 0x10,  // Get data from keyboard
+    MT_GET_DATA_ACK   = 0x11,  // returned data to process (ACK)
+    MT_SET_DATA       = 0x20,  // Set data on keyboard
+    MT_SET_DATA_ACK   = 0x21,  // returned data to confirm (ACK)
+    MT_SEND_DATA      = 0x30,  // Sending data/action from keyboard
+    MT_SEND_DATA_ACK  = 0x31,  // returned data/action confirmation (ACK)
+    MT_EXE_ACTION     = 0x40,  // executing actions on keyboard
+    MT_EXE_ACTION_ACK = 0x41,  // return confirmation/value (ACK)
+    MT_TYPE_ERROR     = 0x80   // type not recognised (ACK)
 };
 
-enum DATA_TYPE {
-    DT_NONE = 0x00,
-    DT_HANDSHAKE,
-    DT_DEFAULT_LAYER,
-    DT_CURRENT_LAYER,
-    DT_KEYMAP_OPTIONS,
-    DT_BACKLIGHT,
-    DT_RGBLIGHT,
-    DT_UNICODE,
-    DT_DEBUG,
-    DT_AUDIO,
-    DT_QUANTUM_ACTION,
-    DT_KEYBOARD_ACTION,
-    DT_USER_ACTION,
-    DT_KEYMAP_SIZE,
-    DT_KEYMAP
-};
+enum DATA_TYPE { DT_NONE = 0x00, DT_HANDSHAKE, DT_DEFAULT_LAYER, DT_CURRENT_LAYER, DT_KEYMAP_OPTIONS, DT_BACKLIGHT, DT_RGBLIGHT, DT_UNICODE, DT_DEBUG, DT_AUDIO, DT_QUANTUM_ACTION, DT_KEYBOARD_ACTION, DT_USER_ACTION, DT_KEYMAP_SIZE, DT_KEYMAP };
 
-void dword_to_bytes(uint32_t dword, uint8_t * bytes);
-uint32_t bytes_to_dword(uint8_t * bytes, uint8_t index);
+void     dword_to_bytes(uint32_t dword, uint8_t* bytes);
+uint32_t bytes_to_dword(uint8_t* bytes, uint8_t index);
 
 #define MT_GET_DATA(data_type, data, length) SEND_BYTES(MT_GET_DATA, data_type, data, length)
 #define MT_GET_DATA_ACK(data_type, data, length) SEND_BYTES(MT_GET_DATA_ACK, data_type, data, length)
@@ -63,15 +47,12 @@ uint32_t bytes_to_dword(uint8_t * bytes, uint8_t index);
 #define MT_EXE_ACTION(data_type, data, length) SEND_BYTES(MT_EXE_ACTION, data_type, data, length)
 #define MT_EXE_ACTION_ACK(data_type, data, length) SEND_BYTES(MT_EXE_ACTION_ACK, data_type, data, length)
 
-void process_api(uint16_t length, uint8_t * data);
+void process_api(uint16_t length, uint8_t* data);
 
-__attribute__ ((weak))
-bool process_api_quantum(uint8_t length, uint8_t * data);
+__attribute__((weak)) bool process_api_quantum(uint8_t length, uint8_t* data);
 
-__attribute__ ((weak))
-bool process_api_keyboard(uint8_t length, uint8_t * data);
+__attribute__((weak)) bool process_api_keyboard(uint8_t length, uint8_t* data);
 
-__attribute__ ((weak))
-bool process_api_user(uint8_t length, uint8_t * data);
+__attribute__((weak)) bool process_api_user(uint8_t length, uint8_t* data);
 
 #endif

quantum/api/api_sysex.c

@@ -18,7 +18,7 @@
 #include "print.h"
 #include "qmk_midi.h"
 
-void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint16_t length) {
+void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t* bytes, uint16_t length) {
     // SEND_STRING("\nTX: ");
     // for (uint8_t i = 0; i < length; i++) {
     //     send_byte(bytes[i]);
@@ -29,7 +29,6 @@ void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes,
         return;
     }
 
-
     // The buffer size required is calculated as the following
     // API_SYSEX_MAX_SIZE is the maximum length
     // In addition to that we have a two byte message header consisting of the message_type and data_type
@@ -37,14 +36,14 @@ void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes,
     // We just add one extra byte in case it's not divisible by 7
     // Then we have an unencoded header consisting of 4 bytes
     // Plus a one byte terminator
-    const unsigned message_header = 2;
+    const unsigned message_header    = 2;
     const unsigned unencoded_message = API_SYSEX_MAX_SIZE + message_header;
     const unsigned encoding_overhead = unencoded_message / 7 + 1;
-    const unsigned encoded_size = unencoded_message + encoding_overhead;
-    const unsigned unencoded_header = 4;
-    const unsigned terminator = 1;
-    const unsigned buffer_size = encoded_size + unencoded_header + terminator;
-    uint8_t buffer[encoded_size + unencoded_header + terminator];
+    const unsigned encoded_size      = unencoded_message + encoding_overhead;
+    const unsigned unencoded_header  = 4;
+    const unsigned terminator        = 1;
+    const unsigned buffer_size       = encoded_size + unencoded_header + terminator;
+    uint8_t        buffer[encoded_size + unencoded_header + terminator];
     // The unencoded header
     buffer[0] = 0xF0;
     buffer[1] = 0x00;
@@ -53,16 +52,16 @@ void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes,
 
     // We copy the message to the end of the array, this way we can do an inplace encoding, using the same
     // buffer for both input and output
-    const unsigned message_size = length + message_header;
-    uint8_t* unencoded_start = buffer + buffer_size - message_size;
-    uint8_t* ptr = unencoded_start;
-    *(ptr++) = message_type;
-    *(ptr++) = data_type;
+    const unsigned message_size    = length + message_header;
+    uint8_t*       unencoded_start = buffer + buffer_size - message_size;
+    uint8_t*       ptr             = unencoded_start;
+    *(ptr++)                       = message_type;
+    *(ptr++)                       = data_type;
     memcpy(ptr, bytes, length);
 
     unsigned encoded_length = sysex_encode(buffer + unencoded_header, unencoded_start, message_size);
-    unsigned final_size = unencoded_header + encoded_length + terminator;
-    buffer[final_size - 1] = 0xF7;
+    unsigned final_size     = unencoded_header + encoded_length + terminator;
+    buffer[final_size - 1]  = 0xF7;
     midi_send_array(&midi_device, final_size, buffer);
 
     // SEND_STRING("\nTD: ");

quantum/api/api_sysex.h

@@ -19,7 +19,7 @@
 
 #include "api.h"
 
-void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint16_t length);
+void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t* bytes, uint16_t length);
 
 #define SEND_BYTES(mt, dt, b, l) send_bytes_sysex(mt, dt, b, l)
 

quantum/audio/audio_pwm.c

@@ -29,7 +29,6 @@
 
 #define CPU_PRESCALER 8
 
-
 // Timer Abstractions
 
 // TIMSK3 - Timer/Counter #3 Interrupt Mask Register
@@ -37,70 +36,67 @@
 #define ENABLE_AUDIO_COUNTER_3_ISR TIMSK3 |= _BV(OCIE3A)
 #define DISABLE_AUDIO_COUNTER_3_ISR TIMSK3 &= ~_BV(OCIE3A)
 
-
 // TCCR3A: Timer/Counter #3 Control Register
 // Compare Output Mode (COM3An) = 0b00 = Normal port operation, OC3A disconnected from PC6
 #define ENABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A |= _BV(COM3A1);
 #define DISABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A &= ~(_BV(COM3A1) | _BV(COM3A0));
 
-
 #define NOTE_PERIOD ICR3
 #define NOTE_DUTY_CYCLE OCR3A
 
-
 #ifdef PWM_AUDIO
-    #include "wave.h"
-    #define SAMPLE_DIVIDER 39
-    #define SAMPLE_RATE (2000000.0/SAMPLE_DIVIDER/2048)
-    // Resistor value of 1/ (2 * PI * 10nF * (2000000 hertz / SAMPLE_DIVIDER / 10)) for 10nF cap
-
-    float places[8] = {0, 0, 0, 0, 0, 0, 0, 0};
-    uint16_t place_int = 0;
-    bool repeat = true;
+#    include "wave.h"
+#    define SAMPLE_DIVIDER 39
+#    define SAMPLE_RATE (2000000.0 / SAMPLE_DIVIDER / 2048)
+// Resistor value of 1/ (2 * PI * 10nF * (2000000 hertz / SAMPLE_DIVIDER / 10)) for 10nF cap
+
+float    places[8] = {0, 0, 0, 0, 0, 0, 0, 0};
+uint16_t place_int = 0;
+bool     repeat    = true;
 #endif
 
 void delay_us(int count) {
-  while(count--) {
-    _delay_us(1);
-  }
+    while (count--) {
+        _delay_us(1);
+    }
 }
 
-int voices = 0;
-int voice_place = 0;
-float frequency = 0;
-int volume = 0;
-long position = 0;
+int   voices      = 0;
+int   voice_place = 0;
+float frequency   = 0;
+int   volume      = 0;
+long  position    = 0;
 
 float frequencies[8] = {0, 0, 0, 0, 0, 0, 0, 0};
-int volumes[8] = {0, 0, 0, 0, 0, 0, 0, 0};
-bool sliding = false;
+int   volumes[8]     = {0, 0, 0, 0, 0, 0, 0, 0};
+bool  sliding        = false;
 
 float place = 0;
 
-uint8_t * sample;
+uint8_t* sample;
 uint16_t sample_length = 0;
 // float freq = 0;
 
-bool     playing_notes = false;
-bool     playing_note = false;
+bool     playing_notes  = false;
+bool     playing_note   = false;
 float    note_frequency = 0;
-float    note_length = 0;
-uint8_t  note_tempo = TEMPO_DEFAULT;
-float    note_timbre = TIMBRE_DEFAULT;
-uint16_t note_position = 0;
-float (* notes_pointer)[][2];
+float    note_length    = 0;
+uint8_t  note_tempo     = TEMPO_DEFAULT;
+float    note_timbre    = TIMBRE_DEFAULT;
+uint16_t note_position  = 0;
+float (*notes_pointer)[][2];
 uint16_t notes_count;
 bool     notes_repeat;
 float    notes_rest;
 bool     note_resting = false;
 
 uint16_t current_note = 0;
-uint8_t rest_counter = 0;
+uint8_t  rest_counter = 0;
 
 #ifdef VIBRATO_ENABLE
-float vibrato_counter = 0;
+float vibrato_counter  = 0;
 float vibrato_strength = .5;
-float vibrato_rate = 0.125;
+float vibrato_rate     = 0.125;
 #endif
 
 float polyphony_rate = 0;
@@ -112,50 +108,49 @@ audio_config_t audio_config;
 uint16_t envelope_index = 0;
 
 void audio_init() {
-
     // Check EEPROM
-    if (!eeconfig_is_enabled())
-    {
+    if (!eeconfig_is_enabled()) {
         eeconfig_init();
     }
     audio_config.raw = eeconfig_read_audio();
 
-    #ifdef PWM_AUDIO
+#ifdef PWM_AUDIO
 
-        PLLFRQ = _BV(PDIV2);
-        PLLCSR = _BV(PLLE);
-        while(!(PLLCSR & _BV(PLOCK)));
-        PLLFRQ |= _BV(PLLTM0); /* PCK 48MHz */
+    PLLFRQ = _BV(PDIV2);
+    PLLCSR = _BV(PLLE);
+    while (!(PLLCSR & _BV(PLOCK)))
+        ;
+    PLLFRQ |= _BV(PLLTM0); /* PCK 48MHz */
 
-        /* Init a fast PWM on Timer4 */
-        TCCR4A = _BV(COM4A0) | _BV(PWM4A); /* Clear OC4A on Compare Match */
-        TCCR4B = _BV(CS40); /* No prescaling => f = PCK/256 = 187500Hz */
-        OCR4A = 0;
+    /* Init a fast PWM on Timer4 */
+    TCCR4A = _BV(COM4A0) | _BV(PWM4A); /* Clear OC4A on Compare Match */
+    TCCR4B = _BV(CS40);                /* No prescaling => f = PCK/256 = 187500Hz */
+    OCR4A  = 0;
 
-        /* Enable the OC4A output */
-        DDRC |= _BV(PORTC6);
+    /* Enable the OC4A output */
+    DDRC |= _BV(PORTC6);
 
-        DISABLE_AUDIO_COUNTER_3_ISR; // Turn off 3A interputs
+    DISABLE_AUDIO_COUNTER_3_ISR;  // Turn off 3A interputs
 
-        TCCR3A = 0x0; // Options not needed
-        TCCR3B = _BV(CS31) | _BV(CS30) | _BV(WGM32); // 64th prescaling and CTC
-        OCR3A = SAMPLE_DIVIDER - 1; // Correct count/compare, related to sample playback
+    TCCR3A = 0x0;                                 // Options not needed
+    TCCR3B = _BV(CS31) | _BV(CS30) | _BV(WGM32);  // 64th prescaling and CTC
+    OCR3A  = SAMPLE_DIVIDER - 1;                  // Correct count/compare, related to sample playback
 
-    #else
+#else
 
-    	// Set port PC6 (OC3A and /OC4A) as output
-        DDRC |= _BV(PORTC6);
+    // Set port PC6 (OC3A and /OC4A) as output
+    DDRC |= _BV(PORTC6);
 
-        DISABLE_AUDIO_COUNTER_3_ISR;
+    DISABLE_AUDIO_COUNTER_3_ISR;
 
-		// TCCR3A / TCCR3B: Timer/Counter #3 Control Registers
-		// Compare Output Mode (COM3An) = 0b00 = Normal port operation, OC3A disconnected from PC6
-		// Waveform Generation Mode (WGM3n) = 0b1110 = Fast PWM Mode 14 (Period = ICR3, Duty Cycle = OCR3A)
-		// Clock Select (CS3n) = 0b010 = Clock / 8
-        TCCR3A = (0 << COM3A1) | (0 << COM3A0) | (1 << WGM31) | (0 << WGM30);
-        TCCR3B = (1 << WGM33)  | (1 << WGM32)  | (0 << CS32)  | (1 << CS31) | (0 << CS30);
+    // TCCR3A / TCCR3B: Timer/Counter #3 Control Registers
+    // Compare Output Mode (COM3An) = 0b00 = Normal port operation, OC3A disconnected from PC6
+    // Waveform Generation Mode (WGM3n) = 0b1110 = Fast PWM Mode 14 (Period = ICR3, Duty Cycle = OCR3A)
+    // Clock Select (CS3n) = 0b010 = Clock / 8
+    TCCR3A = (0 << COM3A1) | (0 << COM3A0) | (1 << WGM31) | (0 << WGM30);
+    TCCR3B = (1 << WGM33) | (1 << WGM32) | (0 << CS32) | (1 << CS31) | (0 << CS30);
 
-    #endif
+#endif
 
     audio_initialized = true;
 }
@@ -165,62 +160,59 @@ void stop_all_notes() {
         audio_init();
     }
     voices = 0;
-    #ifdef PWM_AUDIO
-	    DISABLE_AUDIO_COUNTER_3_ISR;
-    #else
-        DISABLE_AUDIO_COUNTER_3_ISR;
-        DISABLE_AUDIO_COUNTER_3_OUTPUT;
-    #endif
+#ifdef PWM_AUDIO
+    DISABLE_AUDIO_COUNTER_3_ISR;
+#else
+    DISABLE_AUDIO_COUNTER_3_ISR;
+    DISABLE_AUDIO_COUNTER_3_OUTPUT;
+#endif
 
     playing_notes = false;
-    playing_note = false;
-    frequency = 0;
-    volume = 0;
+    playing_note  = false;
+    frequency     = 0;
+    volume        = 0;
 
-    for (uint8_t i = 0; i < 8; i++)
-    {
+    for (uint8_t i = 0; i < 8; i++) {
         frequencies[i] = 0;
-        volumes[i] = 0;
+        volumes[i]     = 0;
     }
 }
 
-void stop_note(float freq)
-{
+void stop_note(float freq) {
     if (playing_note) {
         if (!audio_initialized) {
             audio_init();
         }
-        #ifdef PWM_AUDIO
-            freq = freq / SAMPLE_RATE;
-        #endif
+#ifdef PWM_AUDIO
+        freq = freq / SAMPLE_RATE;
+#endif
         for (int i = 7; i >= 0; i--) {
             if (frequencies[i] == freq) {
                 frequencies[i] = 0;
-                volumes[i] = 0;
+                volumes[i]     = 0;
                 for (int j = i; (j < 7); j++) {
-                    frequencies[j] = frequencies[j+1];
-                    frequencies[j+1] = 0;
-                    volumes[j] = volumes[j+1];
-                    volumes[j+1] = 0;
+                    frequencies[j]     = frequencies[j + 1];
+                    frequencies[j + 1] = 0;
+                    volumes[j]         = volumes[j + 1];
+                    volumes[j + 1]     = 0;
                 }
                 break;
             }
         }
         voices--;
-        if (voices < 0)
-            voices = 0;
+        if (voices < 0) voices = 0;
         if (voice_place >= voices) {
             voice_place = 0;
         }
         if (voices == 0) {
-            #ifdef PWM_AUDIO
-                DISABLE_AUDIO_COUNTER_3_ISR;
-            #else
-                DISABLE_AUDIO_COUNTER_3_ISR;
-                DISABLE_AUDIO_COUNTER_3_OUTPUT;
-            #endif
-            frequency = 0;
-            volume = 0;
+#ifdef PWM_AUDIO
+            DISABLE_AUDIO_COUNTER_3_ISR;
+#else
+            DISABLE_AUDIO_COUNTER_3_ISR;
+            DISABLE_AUDIO_COUNTER_3_OUTPUT;
+#endif
+            frequency    = 0;
+            volume       = 0;
             playing_note = false;
         }
     }
@@ -228,126 +220,120 @@ void stop_note(float freq)
 
 #ifdef VIBRATO_ENABLE
 
-float mod(float a, int b)
-{
+float mod(float a, int b) {
     float r = fmod(a, b);
     return r < 0 ? r + b : r;
 }
 
 float vibrato(float average_freq) {
-    #ifdef VIBRATO_STRENGTH_ENABLE
-        float vibrated_freq = average_freq * pow(vibrato_lut[(int)vibrato_counter], vibrato_strength);
-    #else
-        float vibrated_freq = average_freq * vibrato_lut[(int)vibrato_counter];
-    #endif
-    vibrato_counter = mod((vibrato_counter + vibrato_rate * (1.0 + 440.0/average_freq)), VIBRATO_LUT_LENGTH);
+#    ifdef VIBRATO_STRENGTH_ENABLE
+    float vibrated_freq = average_freq * pow(vibrato_lut[(int)vibrato_counter], vibrato_strength);
+#    else
+    float vibrated_freq = average_freq * vibrato_lut[(int)vibrato_counter];
+#    endif
+    vibrato_counter = mod((vibrato_counter + vibrato_rate * (1.0 + 440.0 / average_freq)), VIBRATO_LUT_LENGTH);
     return vibrated_freq;
 }
 
 #endif
 
-ISR(TIMER3_COMPA_vect)
-{
+ISR(TIMER3_COMPA_vect) {
     if (playing_note) {
-        #ifdef PWM_AUDIO
-            if (voices == 1) {
+#ifdef PWM_AUDIO
+        if (voices == 1) {
+            // SINE
+            OCR4A = pgm_read_byte(&sinewave[(uint16_t)place]) >> 2;
+
+            // SQUARE
+            // if (((int)place) >= 1024){
+            //     OCR4A = 0xFF >> 2;
+            // } else {
+            //     OCR4A = 0x00;
+            // }
+
+            // SAWTOOTH
+            // OCR4A = (int)place / 4;
+
+            // TRIANGLE
+            // if (((int)place) >= 1024) {
+            //     OCR4A = (int)place / 2;
+            // } else {
+            //     OCR4A = 2048 - (int)place / 2;
+            // }
+
+            place += frequency;
+
+            if (place >= SINE_LENGTH) place -= SINE_LENGTH;
+
+        } else {
+            int sum = 0;
+            for (int i = 0; i < voices; i++) {
                 // SINE
-                OCR4A = pgm_read_byte(&sinewave[(uint16_t)place]) >> 2;
+                sum += pgm_read_byte(&sinewave[(uint16_t)places[i]]) >> 2;
 
                 // SQUARE
-                // if (((int)place) >= 1024){
-                //     OCR4A = 0xFF >> 2;
+                // if (((int)places[i]) >= 1024){
+                //     sum += 0xFF >> 2;
                 // } else {
-                //     OCR4A = 0x00;
+                //     sum += 0x00;
                 // }
 
-                // SAWTOOTH
-                // OCR4A = (int)place / 4;
-
-                // TRIANGLE
-                // if (((int)place) >= 1024) {
-                //     OCR4A = (int)place / 2;
-                // } else {
-                //     OCR4A = 2048 - (int)place / 2;
-                // }
+                places[i] += frequencies[i];
 
-                place += frequency;
-
-                if (place >= SINE_LENGTH)
-                    place -= SINE_LENGTH;
-
-            } else {
-                int sum = 0;
-                for (int i = 0; i < voices; i++) {
-                    // SINE
-                    sum += pgm_read_byte(&sinewave[(uint16_t)places[i]]) >> 2;
-
-                    // SQUARE
-                    // if (((int)places[i]) >= 1024){
-                    //     sum += 0xFF >> 2;
-                    // } else {
-                    //     sum += 0x00;
-                    // }
-
-                    places[i] += frequencies[i];
-
-                    if (places[i] >= SINE_LENGTH)
-                        places[i] -= SINE_LENGTH;
-                }
-                OCR4A = sum;
+                if (places[i] >= SINE_LENGTH) places[i] -= SINE_LENGTH;
             }
-        #else
-            if (voices > 0) {
-                float freq;
-                if (polyphony_rate > 0) {
-                    if (voices > 1) {
-                        voice_place %= voices;
-                        if (place++ > (frequencies[voice_place] / polyphony_rate / CPU_PRESCALER)) {
-                            voice_place = (voice_place + 1) % voices;
-                            place = 0.0;
-                        }
-                    }
-                    #ifdef VIBRATO_ENABLE
-                    if (vibrato_strength > 0) {
-                        freq = vibrato(frequencies[voice_place]);
-                    } else {
-                    #else
-                    {
-                    #endif
-                        freq = frequencies[voice_place];
+            OCR4A = sum;
+        }
+#else
+        if (voices > 0) {
+            float freq;
+            if (polyphony_rate > 0) {
+                if (voices > 1) {
+                    voice_place %= voices;
+                    if (place++ > (frequencies[voice_place] / polyphony_rate / CPU_PRESCALER)) {
+                        voice_place = (voice_place + 1) % voices;
+                        place       = 0.0;
                     }
+                }
+#    ifdef VIBRATO_ENABLE
+                if (vibrato_strength > 0) {
+                    freq = vibrato(frequencies[voice_place]);
                 } else {
-                    if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440/frequencies[voices - 1]/12/2)) {
-                        frequency = frequency * pow(2, 440/frequency/12/2);
-                    } else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440/frequencies[voices - 1]/12/2)) {
-                        frequency = frequency * pow(2, -440/frequency/12/2);
-                    } else {
-                        frequency = frequencies[voices - 1];
-                    }
-
-
-                    #ifdef VIBRATO_ENABLE
-                    if (vibrato_strength > 0) {
-                        freq = vibrato(frequency);
-                    } else {
-                    #else
-                    {
-                    #endif
-                        freq = frequency;
-                    }
+#    else
+                {
+#    endif
+                    freq = frequencies[voice_place];
+                }
+            } else {
+                if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440 / frequencies[voices - 1] / 12 / 2)) {
+                    frequency = frequency * pow(2, 440 / frequency / 12 / 2);
+                } else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440 / frequencies[voices - 1] / 12 / 2)) {
+                    frequency = frequency * pow(2, -440 / frequency / 12 / 2);
+                } else {
+                    frequency = frequencies[voices - 1];
                 }
 
-                if (envelope_index < 65535) {
-                    envelope_index++;
+#    ifdef VIBRATO_ENABLE
+                if (vibrato_strength > 0) {
+                    freq = vibrato(frequency);
+                } else {
+#    else
+                {
+#    endif
+                    freq = frequency;
                 }
-                freq = voice_envelope(freq);
+            }
 
-                if (freq < 30.517578125)
-                    freq = 30.52;
-                NOTE_PERIOD = (int)(((double)F_CPU) / (freq * CPU_PRESCALER)); // Set max to the period
-                NOTE_DUTY_CYCLE = (int)((((double)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre); // Set compare to half the period
+            if (envelope_index < 65535) {
+                envelope_index++;
             }
-        #endif
+            freq = voice_envelope(freq);
+
+            if (freq < 30.517578125) freq = 30.52;
+            NOTE_PERIOD     = (int)(((double)F_CPU) / (freq * CPU_PRESCALER));                  // Set max to the period
+            NOTE_DUTY_CYCLE = (int)((((double)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre);  // Set compare to half the period
+        }
+#endif
     }
 
     // SAMPLE
@@ -361,41 +347,38 @@ ISR(TIMER3_COMPA_vect)
     //     else
     //         DISABLE_AUDIO_COUNTER_3_ISR;
 
-
     if (playing_notes) {
-        #ifdef PWM_AUDIO
-            OCR4A = pgm_read_byte(&sinewave[(uint16_t)place]) >> 0;
-
-            place += note_frequency;
-            if (place >= SINE_LENGTH)
-                place -= SINE_LENGTH;
-        #else
-            if (note_frequency > 0) {
-                float freq;
-
-                #ifdef VIBRATO_ENABLE
-                if (vibrato_strength > 0) {
-                    freq = vibrato(note_frequency);
-                } else {
-                #else
-                {
-                #endif
-                    freq = note_frequency;
-                }
+#ifdef PWM_AUDIO
+        OCR4A = pgm_read_byte(&sinewave[(uint16_t)place]) >> 0;
 
-                if (envelope_index < 65535) {
-                    envelope_index++;
-                }
-                freq = voice_envelope(freq);
+        place += note_frequency;
+        if (place >= SINE_LENGTH) place -= SINE_LENGTH;
+#else
+        if (note_frequency > 0) {
+            float freq;
 
-                NOTE_PERIOD = (int)(((double)F_CPU) / (freq * CPU_PRESCALER)); // Set max to the period
-                NOTE_DUTY_CYCLE = (int)((((double)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre); // Set compare to half the period
+#    ifdef VIBRATO_ENABLE
+            if (vibrato_strength > 0) {
+                freq = vibrato(note_frequency);
             } else {
-                NOTE_PERIOD = 0;
-                NOTE_DUTY_CYCLE = 0;
+#    else
+            {
+#    endif
+                freq = note_frequency;
             }
-        #endif
 
+            if (envelope_index < 65535) {
+                envelope_index++;
+            }
+            freq = voice_envelope(freq);
+
+            NOTE_PERIOD     = (int)(((double)F_CPU) / (freq * CPU_PRESCALER));                  // Set max to the period
+            NOTE_DUTY_CYCLE = (int)((((double)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre);  // Set compare to half the period
+        } else {
+            NOTE_PERIOD     = 0;
+            NOTE_DUTY_CYCLE = 0;
+        }
+#endif
 
         note_position++;
         bool end_of_note = false;
@@ -409,126 +392,116 @@ ISR(TIMER3_COMPA_vect)
                 if (notes_repeat) {
                     current_note = 0;
                 } else {
-                    #ifdef PWM_AUDIO
-                        DISABLE_AUDIO_COUNTER_3_ISR;
-                    #else
-                        DISABLE_AUDIO_COUNTER_3_ISR;
-                        DISABLE_AUDIO_COUNTER_3_OUTPUT;
-                    #endif
+#ifdef PWM_AUDIO
+                    DISABLE_AUDIO_COUNTER_3_ISR;
+#else
+                    DISABLE_AUDIO_COUNTER_3_ISR;
+                    DISABLE_AUDIO_COUNTER_3_OUTPUT;
+#endif
                     playing_notes = false;
                     return;
                 }
             }
             if (!note_resting && (notes_rest > 0)) {
-                note_resting = true;
+                note_resting   = true;
                 note_frequency = 0;
-                note_length = notes_rest;
+                note_length    = notes_rest;
                 current_note--;
             } else {
                 note_resting = false;
-                #ifdef PWM_AUDIO
-                    note_frequency = (*notes_pointer)[current_note][0] / SAMPLE_RATE;
-                    note_length = (*notes_pointer)[current_note][1] * (((float)note_tempo) / 100);
-                #else
-                    envelope_index = 0;
-                    note_frequency = (*notes_pointer)[current_note][0];
-                    note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100);
-                #endif
+#ifdef PWM_AUDIO
+                note_frequency = (*notes_pointer)[current_note][0] / SAMPLE_RATE;
+                note_length    = (*notes_pointer)[current_note][1] * (((float)note_tempo) / 100);
+#else
+                envelope_index = 0;
+                note_frequency = (*notes_pointer)[current_note][0];
+                note_length    = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100);
+#endif
             }
             note_position = 0;
         }
-
     }
 
     if (!audio_config.enable) {
         playing_notes = false;
-        playing_note = false;
+        playing_note  = false;
     }
 }
 
 void play_note(float freq, int vol) {
-
     if (!audio_initialized) {
         audio_init();
     }
 
-	if (audio_config.enable && voices < 8) {
-	    DISABLE_AUDIO_COUNTER_3_ISR;
-
-	    // Cancel notes if notes are playing
-	    if (playing_notes)
-	        stop_all_notes();
+    if (audio_config.enable && voices < 8) {
+        DISABLE_AUDIO_COUNTER_3_ISR;
 
-	    playing_note = true;
+        // Cancel notes if notes are playing
+        if (playing_notes) stop_all_notes();
 
-	    envelope_index = 0;
+        playing_note = true;
 
-	    #ifdef PWM_AUDIO
-	        freq = freq / SAMPLE_RATE;
-	    #endif
-	    if (freq > 0) {
-	        frequencies[voices] = freq;
-	        volumes[voices] = vol;
-	        voices++;
-	    }
+        envelope_index = 0;
 
-	    #ifdef PWM_AUDIO
-	        ENABLE_AUDIO_COUNTER_3_ISR;
-	    #else
-	        ENABLE_AUDIO_COUNTER_3_ISR;
-	        ENABLE_AUDIO_COUNTER_3_OUTPUT;
-	    #endif
-	}
+#ifdef PWM_AUDIO
+        freq = freq / SAMPLE_RATE;
+#endif
+        if (freq > 0) {
+            frequencies[voices] = freq;
+            volumes[voices]     = vol;
+            voices++;
+        }
 
+#ifdef PWM_AUDIO
+        ENABLE_AUDIO_COUNTER_3_ISR;
+#else
+        ENABLE_AUDIO_COUNTER_3_ISR;
+        ENABLE_AUDIO_COUNTER_3_OUTPUT;
+#endif
+    }
 }
 
-void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat, float n_rest)
-{
-
+void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat, float n_rest) {
     if (!audio_initialized) {
         audio_init();
     }
 
-	if (audio_config.enable) {
-
-	    DISABLE_AUDIO_COUNTER_3_ISR;
-
-		// Cancel note if a note is playing
-	    if (playing_note)
-	        stop_all_notes();
-
-	    playing_notes = true;
+    if (audio_config.enable) {
+        DISABLE_AUDIO_COUNTER_3_ISR;
 
-	    notes_pointer = np;
-	    notes_count = n_count;
-	    notes_repeat = n_repeat;
-	    notes_rest = n_rest;
+        // Cancel note if a note is playing
+        if (playing_note) stop_all_notes();
 
-	    place = 0;
-	    current_note = 0;
+        playing_notes = true;
 
-	    #ifdef PWM_AUDIO
-	        note_frequency = (*notes_pointer)[current_note][0] / SAMPLE_RATE;
-	        note_length = (*notes_pointer)[current_note][1] * (((float)note_tempo) / 100);
-	    #else
-	        note_frequency = (*notes_pointer)[current_note][0];
-	        note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100);
-	    #endif
-	    note_position = 0;
+        notes_pointer = np;
+        notes_count   = n_count;
+        notes_repeat  = n_repeat;
+        notes_rest    = n_rest;
 
+        place        = 0;
+        current_note = 0;
 
-	    #ifdef PWM_AUDIO
-	        ENABLE_AUDIO_COUNTER_3_ISR;
-	    #else
-	        ENABLE_AUDIO_COUNTER_3_ISR;
-	        ENABLE_AUDIO_COUNTER_3_OUTPUT;
-	    #endif
-	}
+#ifdef PWM_AUDIO
+        note_frequency = (*notes_pointer)[current_note][0] / SAMPLE_RATE;
+        note_length    = (*notes_pointer)[current_note][1] * (((float)note_tempo) / 100);
+#else
+        note_frequency = (*notes_pointer)[current_note][0];
+        note_length    = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100);
+#endif
+        note_position = 0;
 
+#ifdef PWM_AUDIO
+        ENABLE_AUDIO_COUNTER_3_ISR;
+#else
+        ENABLE_AUDIO_COUNTER_3_ISR;
+        ENABLE_AUDIO_COUNTER_3_OUTPUT;
+#endif
+    }
 }
 
 #ifdef PWM_AUDIO
-void play_sample(uint8_t * s, uint16_t l, bool r) {
+void play_sample(uint8_t* s, uint16_t l, bool r) {
     if (!audio_initialized) {
         audio_init();
     }
@@ -536,17 +509,16 @@ void play_sample(uint8_t * s, uint16_t l, bool r) {
     if (audio_config.enable) {
         DISABLE_AUDIO_COUNTER_3_ISR;
         stop_all_notes();
-        place_int = 0;
-        sample = s;
+        place_int     = 0;
+        sample        = s;
         sample_length = l;
-        repeat = r;
+        repeat        = r;
 
         ENABLE_AUDIO_COUNTER_3_ISR;
     }
 }
 #endif
 
-
 void audio_toggle(void) {
     audio_config.enable ^= 1;
     eeconfig_update_audio(audio_config.raw);
@@ -566,73 +538,45 @@ void audio_off(void) {
 
 // Vibrato rate functions
 
-void set_vibrato_rate(float rate) {
-    vibrato_rate = rate;
-}
+void set_vibrato_rate(float rate) { vibrato_rate = rate; }
 
-void increase_vibrato_rate(float change) {
-    vibrato_rate *= change;
-}
+void increase_vibrato_rate(float change) { vibrato_rate *= change; }
 
-void decrease_vibrato_rate(float change) {
-    vibrato_rate /= change;
-}
+void decrease_vibrato_rate(float change) { vibrato_rate /= change; }
 
-#ifdef VIBRATO_STRENGTH_ENABLE
+#    ifdef VIBRATO_STRENGTH_ENABLE
 
-void set_vibrato_strength(float strength) {
-    vibrato_strength = strength;
-}
+void set_vibrato_strength(float strength) { vibrato_strength = strength; }
 
-void increase_vibrato_strength(float change) {
-    vibrato_strength *= change;
-}
+void increase_vibrato_strength(float change) { vibrato_strength *= change; }
 
-void decrease_vibrato_strength(float change) {
-    vibrato_strength /= change;
-}
+void decrease_vibrato_strength(float change) { vibrato_strength /= change; }
 
-#endif  /* VIBRATO_STRENGTH_ENABLE */
+#    endif /* VIBRATO_STRENGTH_ENABLE */
 
 #endif /* VIBRATO_ENABLE */
 
 // Polyphony functions
 
-void set_polyphony_rate(float rate) {
-    polyphony_rate = rate;
-}
+void set_polyphony_rate(float rate) { polyphony_rate = rate; }
 
-void enable_polyphony() {
-    polyphony_rate = 5;
-}
+void enable_polyphony() { polyphony_rate = 5; }
 
-void disable_polyphony() {
-    polyphony_rate = 0;
-}
+void disable_polyphony() { polyphony_rate = 0; }
 
-void increase_polyphony_rate(float change) {
-    polyphony_rate *= change;
-}
+void increase_polyphony_rate(float change) { polyphony_rate *= change; }
 
-void decrease_polyphony_rate(float change) {
-    polyphony_rate /= change;
-}
+void decrease_polyphony_rate(float change) { polyphony_rate /= change; }
 
 // Timbre function
 
-void set_timbre(float timbre) {
-    note_timbre = timbre;
-}
+void set_timbre(float timbre) { note_timbre = timbre; }
 
 // Tempo functions
 
-void set_tempo(uint8_t tempo) {
-    note_tempo = tempo;
-}
+void set_tempo(uint8_t tempo) { note_tempo = tempo; }
 
-void decrease_tempo(uint8_t tempo_change) {
-    note_tempo += tempo_change;
-}
+void decrease_tempo(uint8_t tempo_change) { note_tempo += tempo_change; }
 
 void increase_tempo(uint8_t tempo_change) {
     if (note_tempo - tempo_change < 10) {
@@ -642,17 +586,10 @@ void increase_tempo(uint8_t tempo_change) {
     }
 }
 
-
 //------------------------------------------------------------------------------
 // Override these functions in your keymap file to play different tunes on
 // startup and bootloader jump
-__attribute__ ((weak))
-void play_startup_tone()
-{
-}
+__attribute__((weak)) void play_startup_tone() {}
 
-__attribute__ ((weak))
-void play_goodbye_tone()
-{
-}
+__attribute__((weak)) void play_goodbye_tone() {}
 //------------------------------------------------------------------------------

quantum/audio/luts.h

@@ -15,22 +15,22 @@
  */
 
 #if defined(__AVR__)
-    #include <avr/io.h>
-    #include <avr/interrupt.h>
-    #include <avr/pgmspace.h>
+#    include <avr/io.h>
+#    include <avr/interrupt.h>
+#    include <avr/pgmspace.h>
 #else
-    #include "ch.h"
-    #include "hal.h"
+#    include "ch.h"
+#    include "hal.h"
 #endif
 
 #ifndef LUTS_H
-#define LUTS_H
+#    define LUTS_H
 
-#define VIBRATO_LUT_LENGTH 20
+#    define VIBRATO_LUT_LENGTH 20
 
-#define FREQUENCY_LUT_LENGTH 349
+#    define FREQUENCY_LUT_LENGTH 349
 
-extern const float vibrato_lut[VIBRATO_LUT_LENGTH];
+extern const float    vibrato_lut[VIBRATO_LUT_LENGTH];
 extern const uint16_t frequency_lut[FREQUENCY_LUT_LENGTH];
 
 #endif /* LUTS_H */

quantum/audio/muse.c

@@ -1,111 +1,56 @@
 #include "muse.h"
 
-enum {
-  MUSE_OFF,
-  MUSE_ON,
-  MUSE_C_1_2,
-  MUSE_C1,
-  MUSE_C2,
-  MUSE_C4,
-  MUSE_C8,
-  MUSE_C3,
-  MUSE_C6,
-  MUSE_B1,
-  MUSE_B2,
-  MUSE_B3,
-  MUSE_B4,
-  MUSE_B5,
-  MUSE_B6,
-  MUSE_B7,
-  MUSE_B8,
-  MUSE_B9,
-  MUSE_B10,
-  MUSE_B11,
-  MUSE_B12,
-  MUSE_B13,
-  MUSE_B14,
-  MUSE_B15,
-  MUSE_B16,
-  MUSE_B17,
-  MUSE_B18,
-  MUSE_B19,
-  MUSE_B20,
-  MUSE_B21,
-  MUSE_B22,
-  MUSE_B23,
-  MUSE_B24,
-  MUSE_B25,
-  MUSE_B26,
-  MUSE_B27,
-  MUSE_B28,
-  MUSE_B29,
-  MUSE_B30,
-  MUSE_B31
-};
+enum { MUSE_OFF, MUSE_ON, MUSE_C_1_2, MUSE_C1, MUSE_C2, MUSE_C4, MUSE_C8, MUSE_C3, MUSE_C6, MUSE_B1, MUSE_B2, MUSE_B3, MUSE_B4, MUSE_B5, MUSE_B6, MUSE_B7, MUSE_B8, MUSE_B9, MUSE_B10, MUSE_B11, MUSE_B12, MUSE_B13, MUSE_B14, MUSE_B15, MUSE_B16, MUSE_B17, MUSE_B18, MUSE_B19, MUSE_B20, MUSE_B21, MUSE_B22, MUSE_B23, MUSE_B24, MUSE_B25, MUSE_B26, MUSE_B27, MUSE_B28, MUSE_B29, MUSE_B30, MUSE_B31 };
 
-bool number_of_ones_to_bool[16] = {
-  1, 0, 0, 1, 0, 1, 1, 0,
-  0, 1, 1, 0, 1, 0, 0, 1
-};
+bool number_of_ones_to_bool[16] = {1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1};
 
-uint8_t muse_interval[4] = {MUSE_B7,  MUSE_B19, MUSE_B3,  MUSE_B28};
+uint8_t muse_interval[4] = {MUSE_B7, MUSE_B19, MUSE_B3, MUSE_B28};
 uint8_t muse_theme[4]    = {MUSE_B8, MUSE_B23, MUSE_B18, MUSE_B17};
 
-bool muse_timer_1bit = 0;
-uint8_t muse_timer_2bit = 0;
-uint8_t muse_timer_2bit_counter = 0;
-uint8_t muse_timer_4bit = 0;
-uint32_t muse_timer_31bit = 0;
+bool     muse_timer_1bit         = 0;
+uint8_t  muse_timer_2bit         = 0;
+uint8_t  muse_timer_2bit_counter = 0;
+uint8_t  muse_timer_4bit         = 0;
+uint32_t muse_timer_31bit        = 0;
 
 bool bit_for_value(uint8_t value) {
-  switch (value) {
-    case MUSE_OFF:
-      return 0;
-    case MUSE_ON:
-      return 1;
-    case MUSE_C_1_2:
-      return muse_timer_1bit;
-    case MUSE_C1:
-      return (muse_timer_4bit & 1);
-    case MUSE_C2:
-      return (muse_timer_4bit & 2);
-    case MUSE_C4:
-      return (muse_timer_4bit & 4);
-    case MUSE_C8:
-      return (muse_timer_4bit & 8);
-    case MUSE_C3:
-      return (muse_timer_2bit & 1);
-    case MUSE_C6:
-      return (muse_timer_2bit & 2);
-    default:
-      return muse_timer_31bit & (1UL << (value - MUSE_B1));
-  }
+    switch (value) {
+        case MUSE_OFF:
+            return 0;
+        case MUSE_ON:
+            return 1;
+        case MUSE_C_1_2:
+            return muse_timer_1bit;
+        case MUSE_C1:
+            return (muse_timer_4bit & 1);
+        case MUSE_C2:
+            return (muse_timer_4bit & 2);
+        case MUSE_C4:
+            return (muse_timer_4bit & 4);
+        case MUSE_C8:
+            return (muse_timer_4bit & 8);
+        case MUSE_C3:
+            return (muse_timer_2bit & 1);
+        case MUSE_C6:
+            return (muse_timer_2bit & 2);
+        default:
+            return muse_timer_31bit & (1UL << (value - MUSE_B1));
+    }
 }
 
 uint8_t muse_clock_pulse(void) {
-
-  bool top = number_of_ones_to_bool[
-    bit_for_value(muse_theme[0]) +
-    (bit_for_value(muse_theme[1]) << 1) +
-    (bit_for_value(muse_theme[2]) << 2) +
-    (bit_for_value(muse_theme[3]) << 3)
-  ];
-
-  if (muse_timer_1bit == 0) {
-    if (muse_timer_2bit_counter == 0) {
-      muse_timer_2bit = (muse_timer_2bit + 1) % 4;
+    bool top = number_of_ones_to_bool[bit_for_value(muse_theme[0]) + (bit_for_value(muse_theme[1]) << 1) + (bit_for_value(muse_theme[2]) << 2) + (bit_for_value(muse_theme[3]) << 3)];
+
+    if (muse_timer_1bit == 0) {
+        if (muse_timer_2bit_counter == 0) {
+            muse_timer_2bit = (muse_timer_2bit + 1) % 4;
+        }
+        muse_timer_2bit_counter = (muse_timer_2bit_counter + 1) % 3;
+        muse_timer_4bit         = (muse_timer_4bit + 1) % 16;
+        muse_timer_31bit        = (muse_timer_31bit << 1) + top;
     }
-    muse_timer_2bit_counter = (muse_timer_2bit_counter + 1) % 3;
-    muse_timer_4bit = (muse_timer_4bit + 1) % 16;
-    muse_timer_31bit = (muse_timer_31bit << 1) + top;
-  }
-
-  muse_timer_1bit = (muse_timer_1bit + 1) % 2;
 
-  return
-    bit_for_value(muse_interval[0]) +
-    (bit_for_value(muse_interval[1]) << 1) +
-    (bit_for_value(muse_interval[2]) << 2) +
-    (bit_for_value(muse_interval[3]) << 3);
+    muse_timer_1bit = (muse_timer_1bit + 1) % 2;
 
+    return bit_for_value(muse_interval[0]) + (bit_for_value(muse_interval[1]) << 1) + (bit_for_value(muse_interval[2]) << 2) + (bit_for_value(muse_interval[3]) << 3);
 }

quantum/audio/musical_notes.h

@@ -20,55 +20,55 @@
 // Tempo Placeholder
 #define TEMPO_DEFAULT 100
 
-
-#define SONG(notes...) { notes }
-
+#define SONG(notes...) \
+    { notes }
 
 // Note Types
-#define MUSICAL_NOTE(note, duration)   {(NOTE##note), duration}
-#define BREVE_NOTE(note)               MUSICAL_NOTE(note, 128)
-#define WHOLE_NOTE(note)               MUSICAL_NOTE(note, 64)
-#define HALF_NOTE(note)                MUSICAL_NOTE(note, 32)
-#define QUARTER_NOTE(note)             MUSICAL_NOTE(note, 16)
-#define EIGHTH_NOTE(note)              MUSICAL_NOTE(note,  8)
-#define SIXTEENTH_NOTE(note)           MUSICAL_NOTE(note,  4)
-
-#define BREVE_DOT_NOTE(note)           MUSICAL_NOTE(note, 128+64)
-#define WHOLE_DOT_NOTE(note)           MUSICAL_NOTE(note, 64+32)
-#define HALF_DOT_NOTE(note)            MUSICAL_NOTE(note, 32+16)
-#define QUARTER_DOT_NOTE(note)         MUSICAL_NOTE(note, 16+8)
-#define EIGHTH_DOT_NOTE(note)          MUSICAL_NOTE(note,  8+4)
-#define SIXTEENTH_DOT_NOTE(note)       MUSICAL_NOTE(note,  4+2)
+#define MUSICAL_NOTE(note, duration) \
+    { (NOTE##note), duration }
+#define BREVE_NOTE(note) MUSICAL_NOTE(note, 128)
+#define WHOLE_NOTE(note) MUSICAL_NOTE(note, 64)
+#define HALF_NOTE(note) MUSICAL_NOTE(note, 32)
+#define QUARTER_NOTE(note) MUSICAL_NOTE(note, 16)
+#define EIGHTH_NOTE(note) MUSICAL_NOTE(note, 8)
+#define SIXTEENTH_NOTE(note) MUSICAL_NOTE(note, 4)
+
+#define BREVE_DOT_NOTE(note) MUSICAL_NOTE(note, 128 + 64)
+#define WHOLE_DOT_NOTE(note) MUSICAL_NOTE(note, 64 + 32)
+#define HALF_DOT_NOTE(note) MUSICAL_NOTE(note, 32 + 16)
+#define QUARTER_DOT_NOTE(note) MUSICAL_NOTE(note, 16 + 8)
+#define EIGHTH_DOT_NOTE(note) MUSICAL_NOTE(note, 8 + 4)
+#define SIXTEENTH_DOT_NOTE(note) MUSICAL_NOTE(note, 4 + 2)
 
 // Note Type Shortcuts
-#define M__NOTE(note, duration)        MUSICAL_NOTE(note, duration)
-#define B__NOTE(n)                     BREVE_NOTE(n)
-#define W__NOTE(n)                     WHOLE_NOTE(n)
-#define H__NOTE(n)                     HALF_NOTE(n)
-#define Q__NOTE(n)                     QUARTER_NOTE(n)
-#define E__NOTE(n)                     EIGHTH_NOTE(n)
-#define S__NOTE(n)                     SIXTEENTH_NOTE(n)
-#define BD_NOTE(n)                     BREVE_DOT_NOTE(n)
-#define WD_NOTE(n)                     WHOLE_DOT_NOTE(n)
-#define HD_NOTE(n)                     HALF_DOT_NOTE(n)
-#define QD_NOTE(n)                     QUARTER_DOT_NOTE(n)
-#define ED_NOTE(n)                     EIGHTH_DOT_NOTE(n)
-#define SD_NOTE(n)                     SIXTEENTH_DOT_NOTE(n)
+#define M__NOTE(note, duration) MUSICAL_NOTE(note, duration)
+#define B__NOTE(n) BREVE_NOTE(n)
+#define W__NOTE(n) WHOLE_NOTE(n)
+#define H__NOTE(n) HALF_NOTE(n)
+#define Q__NOTE(n) QUARTER_NOTE(n)
+#define E__NOTE(n) EIGHTH_NOTE(n)
+#define S__NOTE(n) SIXTEENTH_NOTE(n)
+#define BD_NOTE(n) BREVE_DOT_NOTE(n)
+#define WD_NOTE(n) WHOLE_DOT_NOTE(n)
+#define HD_NOTE(n) HALF_DOT_NOTE(n)
+#define QD_NOTE(n) QUARTER_DOT_NOTE(n)
+#define ED_NOTE(n) EIGHTH_DOT_NOTE(n)
+#define SD_NOTE(n) SIXTEENTH_DOT_NOTE(n)
 
 // Note Timbre
 // Changes how the notes sound
-#define TIMBRE_12       0.125f
-#define TIMBRE_25       0.250f
-#define TIMBRE_50       0.500f
-#define TIMBRE_75       0.750f
-#define TIMBRE_DEFAULT  TIMBRE_50
+#define TIMBRE_12 0.125f
+#define TIMBRE_25 0.250f
+#define TIMBRE_50 0.500f
+#define TIMBRE_75 0.750f
+#define TIMBRE_DEFAULT TIMBRE_50
 
 // Notes - # = Octave
 
 #ifdef __arm__
-#define NOTE_REST         1.00f
+#    define NOTE_REST 1.00f
 #else
-#define NOTE_REST         0.00f
+#    define NOTE_REST 0.00f
 #endif
 
 /* These notes are currently bugged
@@ -97,91 +97,91 @@
 #define NOTE_AS1         58.27f
 */
 
-#define NOTE_B1          61.74f
-#define NOTE_C2          65.41f
-#define NOTE_CS2         69.30f
-#define NOTE_D2          73.42f
-#define NOTE_DS2         77.78f
-#define NOTE_E2          82.41f
-#define NOTE_F2          87.31f
-#define NOTE_FS2         92.50f
-#define NOTE_G2          98.00f
-#define NOTE_GS2        103.83f
-#define NOTE_A2         110.00f
-#define NOTE_AS2        116.54f
-#define NOTE_B2         123.47f
-#define NOTE_C3         130.81f
-#define NOTE_CS3        138.59f
-#define NOTE_D3         146.83f
-#define NOTE_DS3        155.56f
-#define NOTE_E3         164.81f
-#define NOTE_F3         174.61f
-#define NOTE_FS3        185.00f
-#define NOTE_G3         196.00f
-#define NOTE_GS3        207.65f
-#define NOTE_A3         220.00f
-#define NOTE_AS3        233.08f
-#define NOTE_B3         246.94f
-#define NOTE_C4         261.63f
-#define NOTE_CS4        277.18f
-#define NOTE_D4         293.66f
-#define NOTE_DS4        311.13f
-#define NOTE_E4         329.63f
-#define NOTE_F4         349.23f
-#define NOTE_FS4        369.99f
-#define NOTE_G4         392.00f
-#define NOTE_GS4        415.30f
-#define NOTE_A4         440.00f
-#define NOTE_AS4        466.16f
-#define NOTE_B4         493.88f
-#define NOTE_C5         523.25f
-#define NOTE_CS5        554.37f
-#define NOTE_D5         587.33f
-#define NOTE_DS5        622.25f
-#define NOTE_E5         659.26f
-#define NOTE_F5         698.46f
-#define NOTE_FS5        739.99f
-#define NOTE_G5         783.99f
-#define NOTE_GS5        830.61f
-#define NOTE_A5         880.00f
-#define NOTE_AS5        932.33f
-#define NOTE_B5         987.77f
-#define NOTE_C6        1046.50f
-#define NOTE_CS6       1108.73f
-#define NOTE_D6        1174.66f
-#define NOTE_DS6       1244.51f
-#define NOTE_E6        1318.51f
-#define NOTE_F6        1396.91f
-#define NOTE_FS6       1479.98f
-#define NOTE_G6        1567.98f
-#define NOTE_GS6       1661.22f
-#define NOTE_A6        1760.00f
-#define NOTE_AS6       1864.66f
-#define NOTE_B6        1975.53f
-#define NOTE_C7        2093.00f
-#define NOTE_CS7       2217.46f
-#define NOTE_D7        2349.32f
-#define NOTE_DS7       2489.02f
-#define NOTE_E7        2637.02f
-#define NOTE_F7        2793.83f
-#define NOTE_FS7       2959.96f
-#define NOTE_G7        3135.96f
-#define NOTE_GS7       3322.44f
-#define NOTE_A7        3520.00f
-#define NOTE_AS7       3729.31f
-#define NOTE_B7        3951.07f
-#define NOTE_C8        4186.01f
-#define NOTE_CS8       4434.92f
-#define NOTE_D8        4698.64f
-#define NOTE_DS8       4978.03f
-#define NOTE_E8        5274.04f
-#define NOTE_F8        5587.65f
-#define NOTE_FS8       5919.91f
-#define NOTE_G8        6271.93f
-#define NOTE_GS8       6644.88f
-#define NOTE_A8        7040.00f
-#define NOTE_AS8       7458.62f
-#define NOTE_B8        7902.13f
+#define NOTE_B1 61.74f
+#define NOTE_C2 65.41f
+#define NOTE_CS2 69.30f
+#define NOTE_D2 73.42f
+#define NOTE_DS2 77.78f
+#define NOTE_E2 82.41f
+#define NOTE_F2 87.31f
+#define NOTE_FS2 92.50f
+#define NOTE_G2 98.00f
+#define NOTE_GS2 103.83f
+#define NOTE_A2 110.00f
+#define NOTE_AS2 116.54f
+#define NOTE_B2 123.47f
+#define NOTE_C3 130.81f
+#define NOTE_CS3 138.59f
+#define NOTE_D3 146.83f
+#define NOTE_DS3 155.56f
+#define NOTE_E3 164.81f
+#define NOTE_F3 174.61f
+#define NOTE_FS3 185.00f
+#define NOTE_G3 196.00f
+#define NOTE_GS3 207.65f
+#define NOTE_A3 220.00f
+#define NOTE_AS3 233.08f
+#define NOTE_B3 246.94f
+#define NOTE_C4 261.63f
+#define NOTE_CS4 277.18f
+#define NOTE_D4 293.66f
+#define NOTE_DS4 311.13f
+#define NOTE_E4 329.63f
+#define NOTE_F4 349.23f
+#define NOTE_FS4 369.99f
+#define NOTE_G4 392.00f
+#define NOTE_GS4 415.30f
+#define NOTE_A4 440.00f
+#define NOTE_AS4 466.16f
+#define NOTE_B4 493.88f
+#define NOTE_C5 523.25f
+#define NOTE_CS5 554.37f
+#define NOTE_D5 587.33f
+#define NOTE_DS5 622.25f
+#define NOTE_E5 659.26f
+#define NOTE_F5 698.46f
+#define NOTE_FS5 739.99f
+#define NOTE_G5 783.99f
+#define NOTE_GS5 830.61f
+#define NOTE_A5 880.00f
+#define NOTE_AS5 932.33f
+#define NOTE_B5 987.77f
+#define NOTE_C6 1046.50f
+#define NOTE_CS6 1108.73f
+#define NOTE_D6 1174.66f
+#define NOTE_DS6 1244.51f
+#define NOTE_E6 1318.51f
+#define NOTE_F6 1396.91f
+#define NOTE_FS6 1479.98f
+#define NOTE_G6 1567.98f
+#define NOTE_GS6 1661.22f
+#define NOTE_A6 1760.00f
+#define NOTE_AS6 1864.66f
+#define NOTE_B6 1975.53f
+#define NOTE_C7 2093.00f
+#define NOTE_CS7 2217.46f
+#define NOTE_D7 2349.32f
+#define NOTE_DS7 2489.02f
+#define NOTE_E7 2637.02f
+#define NOTE_F7 2793.83f
+#define NOTE_FS7 2959.96f
+#define NOTE_G7 3135.96f
+#define NOTE_GS7 3322.44f
+#define NOTE_A7 3520.00f
+#define NOTE_AS7 3729.31f
+#define NOTE_B7 3951.07f
+#define NOTE_C8 4186.01f
+#define NOTE_CS8 4434.92f
+#define NOTE_D8 4698.64f
+#define NOTE_DS8 4978.03f
+#define NOTE_E8 5274.04f
+#define NOTE_F8 5587.65f
+#define NOTE_FS8 5919.91f
+#define NOTE_G8 6271.93f
+#define NOTE_GS8 6644.88f
+#define NOTE_A8 7040.00f
+#define NOTE_AS8 7458.62f
+#define NOTE_B8 7902.13f
 
 // Flat Aliases
 #define NOTE_DF0 NOTE_CS0
@@ -230,5 +230,4 @@
 #define NOTE_AF8 NOTE_GS8
 #define NOTE_BF8 NOTE_AS8
 
-
 #endif

quantum/audio/voices.c

@@ -19,40 +19,33 @@
 
 // these are imported from audio.c
 extern uint16_t envelope_index;
-extern float note_timbre;
-extern float polyphony_rate;
-extern bool glissando;
+extern float    note_timbre;
+extern float    polyphony_rate;
+extern bool     glissando;
 
 voice_type voice = default_voice;
 
-void set_voice(voice_type v) {
-    voice = v;
-}
+void set_voice(voice_type v) { voice = v; }
 
-void voice_iterate() {
-    voice = (voice + 1) % number_of_voices;
-}
+void voice_iterate() { voice = (voice + 1) % number_of_voices; }
 
-void voice_deiterate() {
-    voice = (voice - 1 + number_of_voices) % number_of_voices;
-}
+void voice_deiterate() { voice = (voice - 1 + number_of_voices) % number_of_voices; }
 
 float voice_envelope(float frequency) {
     // envelope_index ranges from 0 to 0xFFFF, which is preserved at 880.0 Hz
-    __attribute__ ((unused))
-    uint16_t compensated_index = (uint16_t)((float)envelope_index * (880.0 / frequency));
+    __attribute__((unused)) uint16_t compensated_index = (uint16_t)((float)envelope_index * (880.0 / frequency));
 
     switch (voice) {
         case default_voice:
-            glissando = false;
-            note_timbre = TIMBRE_50;
+            glissando      = false;
+            note_timbre    = TIMBRE_50;
             polyphony_rate = 0;
-	        break;
+            break;
 
-    #ifdef AUDIO_VOICES
+#ifdef AUDIO_VOICES
 
         case something:
-            glissando = false;
+            glissando      = false;
             polyphony_rate = 0;
             switch (compensated_index) {
                 case 0 ... 9:
@@ -74,25 +67,23 @@ float voice_envelope(float frequency) {
             break;
 
         case drums:
-            glissando = false;
+            glissando      = false;
             polyphony_rate = 0;
-                // switch (compensated_index) {
-                //     case 0 ... 10:
-                //         note_timbre = 0.5;
-                //         break;
-                //     case 11 ... 20:
-                //         note_timbre = 0.5 * (21 - compensated_index) / 10;
-                //         break;
-                //     default:
-                //         note_timbre = 0;
-                //         break;
-                // }
-                // frequency = (rand() % (int)(frequency * 1.2 - frequency)) + (frequency * 0.8);
+            // switch (compensated_index) {
+            //     case 0 ... 10:
+            //         note_timbre = 0.5;
+            //         break;
+            //     case 11 ... 20:
+            //         note_timbre = 0.5 * (21 - compensated_index) / 10;
+            //         break;
+            //     default:
+            //         note_timbre = 0;
+            //         break;
+            // }
+            // frequency = (rand() % (int)(frequency * 1.2 - frequency)) + (frequency * 0.8);
 
             if (frequency < 80.0) {
-
             } else if (frequency < 160.0) {
-
                 // Bass drum: 60 - 100 Hz
                 frequency = (rand() % (int)(40)) + 60;
                 switch (envelope_index) {
@@ -108,8 +99,6 @@ float voice_envelope(float frequency) {
                 }
 
             } else if (frequency < 320.0) {
-
-
                 // Snare drum: 1 - 2 KHz
                 frequency = (rand() % (int)(1000)) + 1000;
                 switch (envelope_index) {
@@ -125,7 +114,6 @@ float voice_envelope(float frequency) {
                 }
 
             } else if (frequency < 640.0) {
-
                 // Closed Hi-hat: 3 - 5 KHz
                 frequency = (rand() % (int)(2000)) + 3000;
                 switch (envelope_index) {
@@ -141,7 +129,6 @@ float voice_envelope(float frequency) {
                 }
 
             } else if (frequency < 1280.0) {
-
                 // Open Hi-hat: 3 - 5 KHz
                 frequency = (rand() % (int)(2000)) + 3000;
                 switch (envelope_index) {
@@ -155,141 +142,138 @@ float voice_envelope(float frequency) {
                         note_timbre = 0;
                         break;
                 }
-
             }
             break;
         case butts_fader:
-            glissando = true;
+            glissando      = true;
             polyphony_rate = 0;
             switch (compensated_index) {
                 case 0 ... 9:
-                    frequency = frequency / 4;
+                    frequency   = frequency / 4;
                     note_timbre = TIMBRE_12;
-	                break;
+                    break;
 
                 case 10 ... 19:
-                    frequency = frequency / 2;
+                    frequency   = frequency / 2;
                     note_timbre = TIMBRE_12;
-	                break;
+                    break;
 
                 case 20 ... 200:
-                    note_timbre = .125 - pow(((float)compensated_index - 20) / (200 - 20), 2)*.125;
-	                break;
+                    note_timbre = .125 - pow(((float)compensated_index - 20) / (200 - 20), 2) * .125;
+                    break;
 
                 default:
                     note_timbre = 0;
-                	break;
+                    break;
             }
-    	    break;
-
-        // case octave_crunch:
-        //     polyphony_rate = 0;
-        //     switch (compensated_index) {
-        //         case 0 ... 9:
-        //         case 20 ... 24:
-        //         case 30 ... 32:
-        //             frequency = frequency / 2;
-        //             note_timbre = TIMBRE_12;
-        //         break;
-
-        //         case 10 ... 19:
-        //         case 25 ... 29:
-        //         case 33 ... 35:
-        //             frequency = frequency * 2;
-        //             note_timbre = TIMBRE_12;
-	       //          break;
+            break;
 
-        //         default:
-        //             note_timbre = TIMBRE_12;
-        //         	break;
-        //     }
-	       //  break;
+            // case octave_crunch:
+            //     polyphony_rate = 0;
+            //     switch (compensated_index) {
+            //         case 0 ... 9:
+            //         case 20 ... 24:
+            //         case 30 ... 32:
+            //             frequency = frequency / 2;
+            //             note_timbre = TIMBRE_12;
+            //         break;
+
+            //         case 10 ... 19:
+            //         case 25 ... 29:
+            //         case 33 ... 35:
+            //             frequency = frequency * 2;
+            //             note_timbre = TIMBRE_12;
+            //          break;
+
+            //         default:
+            //             note_timbre = TIMBRE_12;
+            //         	break;
+            //     }
+            //  break;
 
         case duty_osc:
             // This slows the loop down a substantial amount, so higher notes may freeze
-            glissando = true;
+            glissando      = true;
             polyphony_rate = 0;
             switch (compensated_index) {
                 default:
-                    #define OCS_SPEED 10
-                    #define OCS_AMP   .25
+#    define OCS_SPEED 10
+#    define OCS_AMP .25
                     // sine wave is slow
                     // note_timbre = (sin((float)compensated_index/10000*OCS_SPEED) * OCS_AMP / 2) + .5;
                     // triangle wave is a bit faster
-                    note_timbre = (float)abs((compensated_index*OCS_SPEED % 3000) - 1500) * ( OCS_AMP / 1500 ) + (1 - OCS_AMP) / 2;
-                	break;
+                    note_timbre = (float)abs((compensated_index * OCS_SPEED % 3000) - 1500) * (OCS_AMP / 1500) + (1 - OCS_AMP) / 2;
+                    break;
             }
-	        break;
+            break;
 
         case duty_octave_down:
-            glissando = true;
+            glissando      = true;
             polyphony_rate = 0;
-            note_timbre = (envelope_index % 2) * .125 + .375 * 2;
-            if ((envelope_index % 4) == 0)
-                note_timbre = 0.5;
-            if ((envelope_index % 8) == 0)
-                note_timbre = 0;
+            note_timbre    = (envelope_index % 2) * .125 + .375 * 2;
+            if ((envelope_index % 4) == 0) note_timbre = 0.5;
+            if ((envelope_index % 8) == 0) note_timbre = 0;
             break;
         case delayed_vibrato:
-            glissando = true;
+            glissando      = true;
             polyphony_rate = 0;
-            note_timbre = TIMBRE_50;
-            #define VOICE_VIBRATO_DELAY 150
-            #define VOICE_VIBRATO_SPEED 50
+            note_timbre    = TIMBRE_50;
+#    define VOICE_VIBRATO_DELAY 150
+#    define VOICE_VIBRATO_SPEED 50
             switch (compensated_index) {
                 case 0 ... VOICE_VIBRATO_DELAY:
                     break;
                 default:
-                    frequency = frequency * vibrato_lut[(int)fmod((((float)compensated_index - (VOICE_VIBRATO_DELAY + 1))/1000*VOICE_VIBRATO_SPEED), VIBRATO_LUT_LENGTH)];
+                    frequency = frequency * vibrato_lut[(int)fmod((((float)compensated_index - (VOICE_VIBRATO_DELAY + 1)) / 1000 * VOICE_VIBRATO_SPEED), VIBRATO_LUT_LENGTH)];
                     break;
             }
             break;
-        // case delayed_vibrato_octave:
-        //     polyphony_rate = 0;
-        //     if ((envelope_index % 2) == 1) {
-        //         note_timbre = 0.55;
-        //     } else {
-        //         note_timbre = 0.45;
-        //     }
-        //     #define VOICE_VIBRATO_DELAY 150
-        //     #define VOICE_VIBRATO_SPEED 50
-        //     switch (compensated_index) {
-        //         case 0 ... VOICE_VIBRATO_DELAY:
-        //             break;
-        //         default:
-        //             frequency = frequency * VIBRATO_LUT[(int)fmod((((float)compensated_index - (VOICE_VIBRATO_DELAY + 1))/1000*VOICE_VIBRATO_SPEED), VIBRATO_LUT_LENGTH)];
-        //             break;
-        //     }
-        //     break;
-        // case duty_fifth_down:
-        //     note_timbre = 0.5;
-        //     if ((envelope_index % 3) == 0)
-        //         note_timbre = 0.75;
-        //     break;
-        // case duty_fourth_down:
-        //     note_timbre = 0.0;
-        //     if ((envelope_index % 12) == 0)
-        //         note_timbre = 0.75;
-        //     if (((envelope_index % 12) % 4) != 1)
-        //         note_timbre = 0.75;
-        //     break;
-        // case duty_third_down:
-        //     note_timbre = 0.5;
-        //     if ((envelope_index % 5) == 0)
-        //         note_timbre = 0.75;
-        //     break;
-        // case duty_fifth_third_down:
-        //     note_timbre = 0.5;
-        //     if ((envelope_index % 5) == 0)
-        //         note_timbre = 0.75;
-        //     if ((envelope_index % 3) == 0)
-        //         note_timbre = 0.25;
-        //     break;
-
-    #endif
-
-		default:
-   			break;
+            // case delayed_vibrato_octave:
+            //     polyphony_rate = 0;
+            //     if ((envelope_index % 2) == 1) {
+            //         note_timbre = 0.55;
+            //     } else {
+            //         note_timbre = 0.45;
+            //     }
+            //     #define VOICE_VIBRATO_DELAY 150
+            //     #define VOICE_VIBRATO_SPEED 50
+            //     switch (compensated_index) {
+            //         case 0 ... VOICE_VIBRATO_DELAY:
+            //             break;
+            //         default:
+            //             frequency = frequency * VIBRATO_LUT[(int)fmod((((float)compensated_index - (VOICE_VIBRATO_DELAY + 1))/1000*VOICE_VIBRATO_SPEED), VIBRATO_LUT_LENGTH)];
+            //             break;
+            //     }
+            //     break;
+            // case duty_fifth_down:
+            //     note_timbre = 0.5;
+            //     if ((envelope_index % 3) == 0)
+            //         note_timbre = 0.75;
+            //     break;
+            // case duty_fourth_down:
+            //     note_timbre = 0.0;
+            //     if ((envelope_index % 12) == 0)
+            //         note_timbre = 0.75;
+            //     if (((envelope_index % 12) % 4) != 1)
+            //         note_timbre = 0.75;
+            //     break;
+            // case duty_third_down:
+            //     note_timbre = 0.5;
+            //     if ((envelope_index % 5) == 0)
+            //         note_timbre = 0.75;
+            //     break;
+            // case duty_fifth_third_down:
+            //     note_timbre = 0.5;
+            //     if ((envelope_index % 5) == 0)
+            //         note_timbre = 0.75;
+            //     if ((envelope_index % 3) == 0)
+            //         note_timbre = 0.25;
+            //     break;
+
+#endif
+
+        default:
+            break;
     }
 
     return frequency;

quantum/audio/voices.h

@@ -16,19 +16,19 @@
 #include <stdint.h>
 #include <stdbool.h>
 #if defined(__AVR__)
-    #include <avr/io.h>
+#    include <avr/io.h>
 #endif
 #include "wait.h"
 #include "luts.h"
 
 #ifndef VOICES_H
-#define VOICES_H
+#    define VOICES_H
 
 float voice_envelope(float frequency);
 
 typedef enum {
     default_voice,
-    #ifdef AUDIO_VOICES
+#    ifdef AUDIO_VOICES
     something,
     drums,
     butts_fader,
@@ -36,13 +36,13 @@ typedef enum {
     duty_osc,
     duty_octave_down,
     delayed_vibrato,
-    // delayed_vibrato_octave,
-    // duty_fifth_down,
-    // duty_fourth_down,
-    // duty_third_down,
-    // duty_fifth_third_down,
-    #endif
-    number_of_voices // important that this is last
+// delayed_vibrato_octave,
+// duty_fifth_down,
+// duty_fourth_down,
+// duty_third_down,
+// duty_fifth_third_down,
+#    endif
+    number_of_voices  // important that this is last
 } voice_type;
 
 void set_voice(voice_type v);

quantum/color.c

@@ -14,81 +14,76 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #include "color.h"
 #include "led_tables.h"
 #include "progmem.h"
 
-RGB hsv_to_rgb( HSV hsv )
-{
-	RGB rgb;
-	uint8_t region, remainder, p, q, t;
-	uint16_t h, s, v;
+RGB hsv_to_rgb(HSV hsv) {
+    RGB      rgb;
+    uint8_t  region, remainder, p, q, t;
+    uint16_t h, s, v;
 
-	if ( hsv.s == 0 )
-	{
+    if (hsv.s == 0) {
 #ifdef USE_CIE1931_CURVE
-		rgb.r = rgb.g = rgb.b = pgm_read_byte( &CIE1931_CURVE[hsv.v] );
+        rgb.r = rgb.g = rgb.b = pgm_read_byte(&CIE1931_CURVE[hsv.v]);
 #else
-		rgb.r = hsv.v;
-		rgb.g = hsv.v;
-		rgb.b = hsv.v;
+        rgb.r = hsv.v;
+        rgb.g = hsv.v;
+        rgb.b = hsv.v;
 #endif
-		return rgb;
-	}
+        return rgb;
+    }
 
-	h = hsv.h;
-	s = hsv.s;
-	v = hsv.v;
+    h = hsv.h;
+    s = hsv.s;
+    v = hsv.v;
 
-	region = h * 6 / 255;
-	remainder = (h * 2 - region * 85) * 3;
+    region    = h * 6 / 255;
+    remainder = (h * 2 - region * 85) * 3;
 
-	p = (v * (255 - s)) >> 8;
-	q = (v * (255 - ((s * remainder) >> 8))) >> 8;
-	t = (v * (255 - ((s * (255 - remainder)) >> 8))) >> 8;
+    p = (v * (255 - s)) >> 8;
+    q = (v * (255 - ((s * remainder) >> 8))) >> 8;
+    t = (v * (255 - ((s * (255 - remainder)) >> 8))) >> 8;
 
-	switch ( region )
-	{
-		case 6:
-		case 0:
-			rgb.r = v;
-			rgb.g = t;
-			rgb.b = p;
-			break;
-		case 1:
-			rgb.r = q;
-			rgb.g = v;
-			rgb.b = p;
-			break;
-		case 2:
-			rgb.r = p;
-			rgb.g = v;
-			rgb.b = t;
-			break;
-		case 3:
-			rgb.r = p;
-			rgb.g = q;
-			rgb.b = v;
-			break;
-		case 4:
-			rgb.r = t;
-			rgb.g = p;
-			rgb.b = v;
-			break;
-		default:
-			rgb.r = v;
-			rgb.g = p;
-			rgb.b = q;
-			break;
-	}
+    switch (region) {
+        case 6:
+        case 0:
+            rgb.r = v;
+            rgb.g = t;
+            rgb.b = p;
+            break;
+        case 1:
+            rgb.r = q;
+            rgb.g = v;
+            rgb.b = p;
+            break;
+        case 2:
+            rgb.r = p;
+            rgb.g = v;
+            rgb.b = t;
+            break;
+        case 3:
+            rgb.r = p;
+            rgb.g = q;
+            rgb.b = v;
+            break;
+        case 4:
+            rgb.r = t;
+            rgb.g = p;
+            rgb.b = v;
+            break;
+        default:
+            rgb.r = v;
+            rgb.g = p;
+            rgb.b = q;
+            break;
+    }
 
 #ifdef USE_CIE1931_CURVE
-	rgb.r = pgm_read_byte( &CIE1931_CURVE[rgb.r] );
-	rgb.g = pgm_read_byte( &CIE1931_CURVE[rgb.g] );
-	rgb.b = pgm_read_byte( &CIE1931_CURVE[rgb.b] );
+    rgb.r = pgm_read_byte(&CIE1931_CURVE[rgb.r]);
+    rgb.g = pgm_read_byte(&CIE1931_CURVE[rgb.g]);
+    rgb.b = pgm_read_byte(&CIE1931_CURVE[rgb.b]);
 #endif
 
-	return rgb;
+    return rgb;
 }
-

quantum/color.h

@@ -14,60 +14,55 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #ifndef COLOR_H
 #define COLOR_H
 
 #include <stdint.h>
 #include <stdbool.h>
 
-
 #if defined(__GNUC__)
-#define PACKED __attribute__ ((__packed__))
+#    define PACKED __attribute__((__packed__))
 #else
-#define PACKED
+#    define PACKED
 #endif
 
 #if defined(_MSC_VER)
-#pragma pack( push, 1 )
+#    pragma pack(push, 1)
 #endif
 
 #ifdef RGBW
-  #define LED_TYPE cRGBW
+#    define LED_TYPE cRGBW
 #else
-  #define LED_TYPE RGB
+#    define LED_TYPE RGB
 #endif
 
 // WS2812 specific layout
-typedef struct PACKED
-{
-	uint8_t g;
-	uint8_t r;
-	uint8_t b;
+typedef struct PACKED {
+    uint8_t g;
+    uint8_t r;
+    uint8_t b;
 } cRGB;
 
 typedef cRGB RGB;
 
 // WS2812 specific layout
-typedef struct PACKED
-{
-	uint8_t g;
-	uint8_t r;
-	uint8_t b;
-	uint8_t w;
+typedef struct PACKED {
+    uint8_t g;
+    uint8_t r;
+    uint8_t b;
+    uint8_t w;
 } cRGBW;
 
-typedef struct PACKED
-{
-	uint8_t h;
-	uint8_t s;
-	uint8_t v;
+typedef struct PACKED {
+    uint8_t h;
+    uint8_t s;
+    uint8_t v;
 } HSV;
 
 #if defined(_MSC_VER)
-#pragma pack( pop )
+#    pragma pack(pop)
 #endif
 
 RGB hsv_to_rgb(HSV hsv);
 
-#endif // COLOR_H
+#endif  // COLOR_H

quantum/config_common.h

@@ -17,284 +17,285 @@
 #pragma once
 
 /* diode directions */
-#define COL2ROW       0
-#define ROW2COL       1
+#define COL2ROW 0
+#define ROW2COL 1
 #define CUSTOM_MATRIX 2 /* Disables built-in matrix scanning code */
 
 // useful for direct pin mapping
 #define NO_PIN (~0)
 
 #ifdef __AVR__
-    #ifndef __ASSEMBLER__
-      #include <avr/io.h>
-    #endif
-    #define PORT_SHIFTER 4 // this may be 4 for all AVR chips
+#    ifndef __ASSEMBLER__
+#        include <avr/io.h>
+#    endif
+#    define PORT_SHIFTER 4  // this may be 4 for all AVR chips
 
-    // If you want to add more to this list, reference the PINx definitions in these header
-    // files: https://github.com/vancegroup-mirrors/avr-libc/tree/master/avr-libc/include/avr
+// If you want to add more to this list, reference the PINx definitions in these header
+// files: https://github.com/vancegroup-mirrors/avr-libc/tree/master/avr-libc/include/avr
 
-    #if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__)
-        #define ADDRESS_BASE 0x00
-        #define PINB_ADDRESS 0x3
-        #define PINC_ADDRESS 0x6
-        #define PIND_ADDRESS 0x9
-        #define PINE_ADDRESS 0xC
-        #define PINF_ADDRESS 0xF
-    #elif defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__)
-        #define ADDRESS_BASE 0x00
-        #define PINB_ADDRESS 0x3
-        #define PINC_ADDRESS 0x6
-        #define PIND_ADDRESS 0x9
-    #elif defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__)
-        #define ADDRESS_BASE 0x00
-        #define PINA_ADDRESS 0x0
-        #define PINB_ADDRESS 0x3
-        #define PINC_ADDRESS 0x6
-        #define PIND_ADDRESS 0x9
-        #define PINE_ADDRESS 0xC
-        #define PINF_ADDRESS 0xF
-    #elif defined(__AVR_ATmega32A__)
-        #define ADDRESS_BASE 0x10
-        #define PIND_ADDRESS 0x0
-        #define PINC_ADDRESS 0x3
-        #define PINB_ADDRESS 0x6
-        #define PINA_ADDRESS 0x9
-    #elif defined(__AVR_ATmega328P__)
-        #define ADDRESS_BASE 0x00
-        #define PINB_ADDRESS 0x3
-        #define PINC_ADDRESS 0x6
-        #define PIND_ADDRESS 0x9
-    #else
-        #error "Pins are not defined"
-    #endif
+#    if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__)
+#        define ADDRESS_BASE 0x00
+#        define PINB_ADDRESS 0x3
+#        define PINC_ADDRESS 0x6
+#        define PIND_ADDRESS 0x9
+#        define PINE_ADDRESS 0xC
+#        define PINF_ADDRESS 0xF
+#    elif defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__)
+#        define ADDRESS_BASE 0x00
+#        define PINB_ADDRESS 0x3
+#        define PINC_ADDRESS 0x6
+#        define PIND_ADDRESS 0x9
+#    elif defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__)
+#        define ADDRESS_BASE 0x00
+#        define PINA_ADDRESS 0x0
+#        define PINB_ADDRESS 0x3
+#        define PINC_ADDRESS 0x6
+#        define PIND_ADDRESS 0x9
+#        define PINE_ADDRESS 0xC
+#        define PINF_ADDRESS 0xF
+#    elif defined(__AVR_ATmega32A__)
+#        define ADDRESS_BASE 0x10
+#        define PIND_ADDRESS 0x0
+#        define PINC_ADDRESS 0x3
+#        define PINB_ADDRESS 0x6
+#        define PINA_ADDRESS 0x9
+#    elif defined(__AVR_ATmega328P__)
+#        define ADDRESS_BASE 0x00
+#        define PINB_ADDRESS 0x3
+#        define PINC_ADDRESS 0x6
+#        define PIND_ADDRESS 0x9
+#    else
+#        error "Pins are not defined"
+#    endif
 
-    /* I/O pins */
-    #define PINDEF(port, pin) ((PIN##port##_ADDRESS << PORT_SHIFTER) | pin)
+/* I/O pins */
+#    define PINDEF(port, pin) ((PIN##port##_ADDRESS << PORT_SHIFTER) | pin)
 
-    #ifdef PORTA
-        #define A0 PINDEF(A, 0)
-        #define A1 PINDEF(A, 1)
-        #define A2 PINDEF(A, 2)
-        #define A3 PINDEF(A, 3)
-        #define A4 PINDEF(A, 4)
-        #define A5 PINDEF(A, 5)
-        #define A6 PINDEF(A, 6)
-        #define A7 PINDEF(A, 7)
-    #endif
-    #ifdef PORTB
-        #define B0 PINDEF(B, 0)
-        #define B1 PINDEF(B, 1)
-        #define B2 PINDEF(B, 2)
-        #define B3 PINDEF(B, 3)
-        #define B4 PINDEF(B, 4)
-        #define B5 PINDEF(B, 5)
-        #define B6 PINDEF(B, 6)
-        #define B7 PINDEF(B, 7)
-    #endif
-    #ifdef PORTC
-        #define C0 PINDEF(C, 0)
-        #define C1 PINDEF(C, 1)
-        #define C2 PINDEF(C, 2)
-        #define C3 PINDEF(C, 3)
-        #define C4 PINDEF(C, 4)
-        #define C5 PINDEF(C, 5)
-        #define C6 PINDEF(C, 6)
-        #define C7 PINDEF(C, 7)
-    #endif
-    #ifdef PORTD
-        #define D0 PINDEF(D, 0)
-        #define D1 PINDEF(D, 1)
-        #define D2 PINDEF(D, 2)
-        #define D3 PINDEF(D, 3)
-        #define D4 PINDEF(D, 4)
-        #define D5 PINDEF(D, 5)
-        #define D6 PINDEF(D, 6)
-        #define D7 PINDEF(D, 7)
-    #endif
-    #ifdef PORTE
-        #define E0 PINDEF(E, 0)
-        #define E1 PINDEF(E, 1)
-        #define E2 PINDEF(E, 2)
-        #define E3 PINDEF(E, 3)
-        #define E4 PINDEF(E, 4)
-        #define E5 PINDEF(E, 5)
-        #define E6 PINDEF(E, 6)
-        #define E7 PINDEF(E, 7)
-    #endif
-    #ifdef PORTF
-        #define F0 PINDEF(F, 0)
-        #define F1 PINDEF(F, 1)
-        #define F2 PINDEF(F, 2)
-        #define F3 PINDEF(F, 3)
-        #define F4 PINDEF(F, 4)
-        #define F5 PINDEF(F, 5)
-        #define F6 PINDEF(F, 6)
-        #define F7 PINDEF(F, 7)
-    #endif
+#    ifdef PORTA
+#        define A0 PINDEF(A, 0)
+#        define A1 PINDEF(A, 1)
+#        define A2 PINDEF(A, 2)
+#        define A3 PINDEF(A, 3)
+#        define A4 PINDEF(A, 4)
+#        define A5 PINDEF(A, 5)
+#        define A6 PINDEF(A, 6)
+#        define A7 PINDEF(A, 7)
+#    endif
+#    ifdef PORTB
+#        define B0 PINDEF(B, 0)
+#        define B1 PINDEF(B, 1)
+#        define B2 PINDEF(B, 2)
+#        define B3 PINDEF(B, 3)
+#        define B4 PINDEF(B, 4)
+#        define B5 PINDEF(B, 5)
+#        define B6 PINDEF(B, 6)
+#        define B7 PINDEF(B, 7)
+#    endif
+#    ifdef PORTC
+#        define C0 PINDEF(C, 0)
+#        define C1 PINDEF(C, 1)
+#        define C2 PINDEF(C, 2)
+#        define C3 PINDEF(C, 3)
+#        define C4 PINDEF(C, 4)
+#        define C5 PINDEF(C, 5)
+#        define C6 PINDEF(C, 6)
+#        define C7 PINDEF(C, 7)
+#    endif
+#    ifdef PORTD
+#        define D0 PINDEF(D, 0)
+#        define D1 PINDEF(D, 1)
+#        define D2 PINDEF(D, 2)
+#        define D3 PINDEF(D, 3)
+#        define D4 PINDEF(D, 4)
+#        define D5 PINDEF(D, 5)
+#        define D6 PINDEF(D, 6)
+#        define D7 PINDEF(D, 7)
+#    endif
+#    ifdef PORTE
+#        define E0 PINDEF(E, 0)
+#        define E1 PINDEF(E, 1)
+#        define E2 PINDEF(E, 2)
+#        define E3 PINDEF(E, 3)
+#        define E4 PINDEF(E, 4)
+#        define E5 PINDEF(E, 5)
+#        define E6 PINDEF(E, 6)
+#        define E7 PINDEF(E, 7)
+#    endif
+#    ifdef PORTF
+#        define F0 PINDEF(F, 0)
+#        define F1 PINDEF(F, 1)
+#        define F2 PINDEF(F, 2)
+#        define F3 PINDEF(F, 3)
+#        define F4 PINDEF(F, 4)
+#        define F5 PINDEF(F, 5)
+#        define F6 PINDEF(F, 6)
+#        define F7 PINDEF(F, 7)
+#    endif
 
 #elif defined(PROTOCOL_CHIBIOS)
-  // Defines mapping for Proton C replacement
-  #ifdef CONVERT_TO_PROTON_C
-    // Left side (front)
-    #define D3 PAL_LINE(GPIOA, 9)
-    #define D2 PAL_LINE(GPIOA, 10)
-    //      GND
-    //      GND
-    #define D1 PAL_LINE(GPIOB, 7)
-    #define D0 PAL_LINE(GPIOB, 6)
-    #define D4 PAL_LINE(GPIOB, 5)
-    #define C6 PAL_LINE(GPIOB, 4)
-    #define D7 PAL_LINE(GPIOB, 3)
-    #define E6 PAL_LINE(GPIOB, 2)
-    #define B4 PAL_LINE(GPIOB, 1)
-    #define B5 PAL_LINE(GPIOB, 0)
+// Defines mapping for Proton C replacement
+#    ifdef CONVERT_TO_PROTON_C
+// Left side (front)
+#        define D3 PAL_LINE(GPIOA, 9)
+#        define D2 PAL_LINE(GPIOA, 10)
+//      GND
+//      GND
+#        define D1 PAL_LINE(GPIOB, 7)
+#        define D0 PAL_LINE(GPIOB, 6)
+#        define D4 PAL_LINE(GPIOB, 5)
+#        define C6 PAL_LINE(GPIOB, 4)
+#        define D7 PAL_LINE(GPIOB, 3)
+#        define E6 PAL_LINE(GPIOB, 2)
+#        define B4 PAL_LINE(GPIOB, 1)
+#        define B5 PAL_LINE(GPIOB, 0)
 
-    // Right side (front)
-    //      RAW
-    //      GND
-    //      RESET
-    //      VCC
-    #define F4 PAL_LINE(GPIOA, 2)
-    #define F5 PAL_LINE(GPIOA, 1)
-    #define F6 PAL_LINE(GPIOA, 0)
-    #define F7 PAL_LINE(GPIOB, 8)
-    #define B1 PAL_LINE(GPIOB, 13)
-    #define B3 PAL_LINE(GPIOB, 14)
-    #define B2 PAL_LINE(GPIOB, 15)
-    #define B6 PAL_LINE(GPIOB, 9)
+// Right side (front)
+//      RAW
+//      GND
+//      RESET
+//      VCC
+#        define F4 PAL_LINE(GPIOA, 2)
+#        define F5 PAL_LINE(GPIOA, 1)
+#        define F6 PAL_LINE(GPIOA, 0)
+#        define F7 PAL_LINE(GPIOB, 8)
+#        define B1 PAL_LINE(GPIOB, 13)
+#        define B3 PAL_LINE(GPIOB, 14)
+#        define B2 PAL_LINE(GPIOB, 15)
+#        define B6 PAL_LINE(GPIOB, 9)
 
-    // LEDs (only D5/C13 uses an actual LED)
-    #ifdef CONVERT_TO_PROTON_C_RXLED
-      #define D5 PAL_LINE(GPIOC, 13)
-      #define B0 PAL_LINE(GPIOC, 13)
-    #else
-      #define D5 PAL_LINE(GPIOC, 13)
-      #define B0 PAL_LINE(GPIOC, 14)
-    #endif
-  #else
-    #define A0  PAL_LINE(GPIOA, 0)
-    #define A1  PAL_LINE(GPIOA, 1)
-    #define A2  PAL_LINE(GPIOA, 2)
-    #define A3  PAL_LINE(GPIOA, 3)
-    #define A4  PAL_LINE(GPIOA, 4)
-    #define A5  PAL_LINE(GPIOA, 5)
-    #define A6  PAL_LINE(GPIOA, 6)
-    #define A7  PAL_LINE(GPIOA, 7)
-    #define A8  PAL_LINE(GPIOA, 8)
-    #define A9  PAL_LINE(GPIOA, 9)
-    #define A10 PAL_LINE(GPIOA, 10)
-    #define A11 PAL_LINE(GPIOA, 11)
-    #define A12 PAL_LINE(GPIOA, 12)
-    #define A13 PAL_LINE(GPIOA, 13)
-    #define A14 PAL_LINE(GPIOA, 14)
-    #define A15 PAL_LINE(GPIOA, 15)
-    #define B0  PAL_LINE(GPIOB, 0)
-    #define B1  PAL_LINE(GPIOB, 1)
-    #define B2  PAL_LINE(GPIOB, 2)
-    #define B3  PAL_LINE(GPIOB, 3)
-    #define B4  PAL_LINE(GPIOB, 4)
-    #define B5  PAL_LINE(GPIOB, 5)
-    #define B6  PAL_LINE(GPIOB, 6)
-    #define B7  PAL_LINE(GPIOB, 7)
-    #define B8  PAL_LINE(GPIOB, 8)
-    #define B9  PAL_LINE(GPIOB, 9)
-    #define B10 PAL_LINE(GPIOB, 10)
-    #define B11 PAL_LINE(GPIOB, 11)
-    #define B12 PAL_LINE(GPIOB, 12)
-    #define B13 PAL_LINE(GPIOB, 13)
-    #define B14 PAL_LINE(GPIOB, 14)
-    #define B15 PAL_LINE(GPIOB, 15)
-    #define B16 PAL_LINE(GPIOB, 16)
-    #define B17 PAL_LINE(GPIOB, 17)
-    #define C0  PAL_LINE(GPIOC, 0)
-    #define C1  PAL_LINE(GPIOC, 1)
-    #define C2  PAL_LINE(GPIOC, 2)
-    #define C3  PAL_LINE(GPIOC, 3)
-    #define C4  PAL_LINE(GPIOC, 4)
-    #define C5  PAL_LINE(GPIOC, 5)
-    #define C6  PAL_LINE(GPIOC, 6)
-    #define C7  PAL_LINE(GPIOC, 7)
-    #define C8  PAL_LINE(GPIOC, 8)
-    #define C9  PAL_LINE(GPIOC, 9)
-    #define C10 PAL_LINE(GPIOC, 10)
-    #define C11 PAL_LINE(GPIOC, 11)
-    #define C12 PAL_LINE(GPIOC, 12)
-    #define C13 PAL_LINE(GPIOC, 13)
-    #define C14 PAL_LINE(GPIOC, 14)
-    #define C15 PAL_LINE(GPIOC, 15)
-    #define D0  PAL_LINE(GPIOD, 0)
-    #define D1  PAL_LINE(GPIOD, 1)
-    #define D2  PAL_LINE(GPIOD, 2)
-    #define D3  PAL_LINE(GPIOD, 3)
-    #define D4  PAL_LINE(GPIOD, 4)
-    #define D5  PAL_LINE(GPIOD, 5)
-    #define D6  PAL_LINE(GPIOD, 6)
-    #define D7  PAL_LINE(GPIOD, 7)
-    #define D8  PAL_LINE(GPIOD, 8)
-    #define D9  PAL_LINE(GPIOD, 9)
-    #define D10 PAL_LINE(GPIOD, 10)
-    #define D11 PAL_LINE(GPIOD, 11)
-    #define D12 PAL_LINE(GPIOD, 12)
-    #define D13 PAL_LINE(GPIOD, 13)
-    #define D14 PAL_LINE(GPIOD, 14)
-    #define D15 PAL_LINE(GPIOD, 15)
-    #define E0  PAL_LINE(GPIOE, 0)
-    #define E1  PAL_LINE(GPIOE, 1)
-    #define E2  PAL_LINE(GPIOE, 2)
-    #define E3  PAL_LINE(GPIOE, 3)
-    #define E4  PAL_LINE(GPIOE, 4)
-    #define E5  PAL_LINE(GPIOE, 5)
-    #define E6  PAL_LINE(GPIOE, 6)
-    #define E7  PAL_LINE(GPIOE, 7)
-    #define E8  PAL_LINE(GPIOE, 8)
-    #define E9  PAL_LINE(GPIOE, 9)
-    #define E10 PAL_LINE(GPIOE, 10)
-    #define E11 PAL_LINE(GPIOE, 11)
-    #define E12 PAL_LINE(GPIOE, 12)
-    #define E13 PAL_LINE(GPIOE, 13)
-    #define E14 PAL_LINE(GPIOE, 14)
-    #define E15 PAL_LINE(GPIOE, 15)
-    #define F0  PAL_LINE(GPIOF, 0)
-    #define F1  PAL_LINE(GPIOF, 1)
-    #define F2  PAL_LINE(GPIOF, 2)
-    #define F3  PAL_LINE(GPIOF, 3)
-    #define F4  PAL_LINE(GPIOF, 4)
-    #define F5  PAL_LINE(GPIOF, 5)
-    #define F6  PAL_LINE(GPIOF, 6)
-    #define F7  PAL_LINE(GPIOF, 7)
-    #define F8  PAL_LINE(GPIOF, 8)
-    #define F9  PAL_LINE(GPIOF, 9)
-    #define F10 PAL_LINE(GPIOF, 10)
-    #define F11 PAL_LINE(GPIOF, 11)
-    #define F12 PAL_LINE(GPIOF, 12)
-    #define F13 PAL_LINE(GPIOF, 13)
-    #define F14 PAL_LINE(GPIOF, 14)
-    #define F15 PAL_LINE(GPIOF, 15)
-  #endif
+// LEDs (only D5/C13 uses an actual LED)
+#        ifdef CONVERT_TO_PROTON_C_RXLED
+#            define D5 PAL_LINE(GPIOC, 13)
+#            define B0 PAL_LINE(GPIOC, 13)
+#        else
+#            define D5 PAL_LINE(GPIOC, 13)
+#            define B0 PAL_LINE(GPIOC, 14)
+#        endif
+#    else
+#        define A0 PAL_LINE(GPIOA, 0)
+#        define A1 PAL_LINE(GPIOA, 1)
+#        define A2 PAL_LINE(GPIOA, 2)
+#        define A3 PAL_LINE(GPIOA, 3)
+#        define A4 PAL_LINE(GPIOA, 4)
+#        define A5 PAL_LINE(GPIOA, 5)
+#        define A6 PAL_LINE(GPIOA, 6)
+#        define A7 PAL_LINE(GPIOA, 7)
+#        define A8 PAL_LINE(GPIOA, 8)
+#        define A9 PAL_LINE(GPIOA, 9)
+#        define A10 PAL_LINE(GPIOA, 10)
+#        define A11 PAL_LINE(GPIOA, 11)
+#        define A12 PAL_LINE(GPIOA, 12)
+#        define A13 PAL_LINE(GPIOA, 13)
+#        define A14 PAL_LINE(GPIOA, 14)
+#        define A15 PAL_LINE(GPIOA, 15)
+#        define B0 PAL_LINE(GPIOB, 0)
+#        define B1 PAL_LINE(GPIOB, 1)
+#        define B2 PAL_LINE(GPIOB, 2)
+#        define B3 PAL_LINE(GPIOB, 3)
+#        define B4 PAL_LINE(GPIOB, 4)
+#        define B5 PAL_LINE(GPIOB, 5)
+#        define B6 PAL_LINE(GPIOB, 6)
+#        define B7 PAL_LINE(GPIOB, 7)
+#        define B8 PAL_LINE(GPIOB, 8)
+#        define B9 PAL_LINE(GPIOB, 9)
+#        define B10 PAL_LINE(GPIOB, 10)
+#        define B11 PAL_LINE(GPIOB, 11)
+#        define B12 PAL_LINE(GPIOB, 12)
+#        define B13 PAL_LINE(GPIOB, 13)
+#        define B14 PAL_LINE(GPIOB, 14)
+#        define B15 PAL_LINE(GPIOB, 15)
+#        define B16 PAL_LINE(GPIOB, 16)
+#        define B17 PAL_LINE(GPIOB, 17)
+#        define C0 PAL_LINE(GPIOC, 0)
+#        define C1 PAL_LINE(GPIOC, 1)
+#        define C2 PAL_LINE(GPIOC, 2)
+#        define C3 PAL_LINE(GPIOC, 3)
+#        define C4 PAL_LINE(GPIOC, 4)
+#        define C5 PAL_LINE(GPIOC, 5)
+#        define C6 PAL_LINE(GPIOC, 6)
+#        define C7 PAL_LINE(GPIOC, 7)
+#        define C8 PAL_LINE(GPIOC, 8)
+#        define C9 PAL_LINE(GPIOC, 9)
+#        define C10 PAL_LINE(GPIOC, 10)
+#        define C11 PAL_LINE(GPIOC, 11)
+#        define C12 PAL_LINE(GPIOC, 12)
+#        define C13 PAL_LINE(GPIOC, 13)
+#        define C14 PAL_LINE(GPIOC, 14)
+#        define C15 PAL_LINE(GPIOC, 15)
+#        define D0 PAL_LINE(GPIOD, 0)
+#        define D1 PAL_LINE(GPIOD, 1)
+#        define D2 PAL_LINE(GPIOD, 2)
+#        define D3 PAL_LINE(GPIOD, 3)
+#        define D4 PAL_LINE(GPIOD, 4)
+#        define D5 PAL_LINE(GPIOD, 5)
+#        define D6 PAL_LINE(GPIOD, 6)
+#        define D7 PAL_LINE(GPIOD, 7)
+#        define D8 PAL_LINE(GPIOD, 8)
+#        define D9 PAL_LINE(GPIOD, 9)
+#        define D10 PAL_LINE(GPIOD, 10)
+#        define D11 PAL_LINE(GPIOD, 11)
+#        define D12 PAL_LINE(GPIOD, 12)
+#        define D13 PAL_LINE(GPIOD, 13)
+#        define D14 PAL_LINE(GPIOD, 14)
+#        define D15 PAL_LINE(GPIOD, 15)
+#        define E0 PAL_LINE(GPIOE, 0)
+#        define E1 PAL_LINE(GPIOE, 1)
+#        define E2 PAL_LINE(GPIOE, 2)
+#        define E3 PAL_LINE(GPIOE, 3)
+#        define E4 PAL_LINE(GPIOE, 4)
+#        define E5 PAL_LINE(GPIOE, 5)
+#        define E6 PAL_LINE(GPIOE, 6)
+#        define E7 PAL_LINE(GPIOE, 7)
+#        define E8 PAL_LINE(GPIOE, 8)
+#        define E9 PAL_LINE(GPIOE, 9)
+#        define E10 PAL_LINE(GPIOE, 10)
+#        define E11 PAL_LINE(GPIOE, 11)
+#        define E12 PAL_LINE(GPIOE, 12)
+#        define E13 PAL_LINE(GPIOE, 13)
+#        define E14 PAL_LINE(GPIOE, 14)
+#        define E15 PAL_LINE(GPIOE, 15)
+#        define F0 PAL_LINE(GPIOF, 0)
+#        define F1 PAL_LINE(GPIOF, 1)
+#        define F2 PAL_LINE(GPIOF, 2)
+#        define F3 PAL_LINE(GPIOF, 3)
+#        define F4 PAL_LINE(GPIOF, 4)
+#        define F5 PAL_LINE(GPIOF, 5)
+#        define F6 PAL_LINE(GPIOF, 6)
+#        define F7 PAL_LINE(GPIOF, 7)
+#        define F8 PAL_LINE(GPIOF, 8)
+#        define F9 PAL_LINE(GPIOF, 9)
+#        define F10 PAL_LINE(GPIOF, 10)
+#        define F11 PAL_LINE(GPIOF, 11)
+#        define F12 PAL_LINE(GPIOF, 12)
+#        define F13 PAL_LINE(GPIOF, 13)
+#        define F14 PAL_LINE(GPIOF, 14)
+#        define F15 PAL_LINE(GPIOF, 15)
+#    endif
 #endif
 
 /* USART configuration */
 #ifdef BLUETOOTH_ENABLE
-#   ifdef __AVR_ATmega32U4__
-#      define SERIAL_UART_BAUD 9600
-#      define SERIAL_UART_DATA UDR1
-#      define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
-#      define SERIAL_UART_RXD_VECT USART1_RX_vect
-#      define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
-#      define SERIAL_UART_INIT() do { \
-            /* baud rate */ \
-            UBRR1L = SERIAL_UART_UBRR; \
-            /* baud rate */ \
-            UBRR1H = SERIAL_UART_UBRR >> 8; \
-            /* enable TX */ \
-            UCSR1B = _BV(TXEN1); \
-            /* 8-bit data */ \
-            UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
-            sei(); \
-        } while(0)
-#   else
-#       error "USART configuration is needed."
-#   endif
+#    ifdef __AVR_ATmega32U4__
+#        define SERIAL_UART_BAUD 9600
+#        define SERIAL_UART_DATA UDR1
+#        define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
+#        define SERIAL_UART_RXD_VECT USART1_RX_vect
+#        define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
+#        define SERIAL_UART_INIT()                  \
+            do {                                    \
+                /* baud rate */                     \
+                UBRR1L = SERIAL_UART_UBRR;          \
+                /* baud rate */                     \
+                UBRR1H = SERIAL_UART_UBRR >> 8;     \
+                /* enable TX */                     \
+                UCSR1B = _BV(TXEN1);                \
+                /* 8-bit data */                    \
+                UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
+                sei();                              \
+            } while (0)
+#    else
+#        error "USART configuration is needed."
+#    endif
 #endif
 
 #define API_SYSEX_MAX_SIZE 32

quantum/debounce/eager_pk.c

@@ -24,15 +24,15 @@ No further inputs are accepted until DEBOUNCE milliseconds have occurred.
 #include <stdlib.h>
 
 #ifndef DEBOUNCE
-#  define DEBOUNCE 5
+#    define DEBOUNCE 5
 #endif
 
 #if (MATRIX_COLS <= 8)
-#  define ROW_SHIFTER ((uint8_t)1)
+#    define ROW_SHIFTER ((uint8_t)1)
 #elif (MATRIX_COLS <= 16)
-#  define ROW_SHIFTER ((uint16_t)1)
+#    define ROW_SHIFTER ((uint16_t)1)
 #elif (MATRIX_COLS <= 32)
-#  define ROW_SHIFTER ((uint32_t)1)
+#    define ROW_SHIFTER ((uint32_t)1)
 #endif
 
 #define debounce_counter_t uint8_t
@@ -48,61 +48,61 @@ void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t n
 
 // we use num_rows rather than MATRIX_ROWS to support split keyboards
 void debounce_init(uint8_t num_rows) {
-  debounce_counters = (debounce_counter_t *)malloc(num_rows * MATRIX_COLS * sizeof(debounce_counter_t));
-  int i             = 0;
-  for (uint8_t r = 0; r < num_rows; r++) {
-    for (uint8_t c = 0; c < MATRIX_COLS; c++) {
-      debounce_counters[i++] = DEBOUNCE_ELAPSED;
+    debounce_counters = (debounce_counter_t *)malloc(num_rows * MATRIX_COLS * sizeof(debounce_counter_t));
+    int i             = 0;
+    for (uint8_t r = 0; r < num_rows; r++) {
+        for (uint8_t c = 0; c < MATRIX_COLS; c++) {
+            debounce_counters[i++] = DEBOUNCE_ELAPSED;
+        }
     }
-  }
 }
 
 void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) {
-  uint8_t current_time = timer_read() % MAX_DEBOUNCE;
-  if (counters_need_update) {
-    update_debounce_counters(num_rows, current_time);
-  }
+    uint8_t current_time = timer_read() % MAX_DEBOUNCE;
+    if (counters_need_update) {
+        update_debounce_counters(num_rows, current_time);
+    }
 
-  if (changed) {
-    transfer_matrix_values(raw, cooked, num_rows, current_time);
-  }
+    if (changed) {
+        transfer_matrix_values(raw, cooked, num_rows, current_time);
+    }
 }
 
 // If the current time is > debounce counter, set the counter to enable input.
 void update_debounce_counters(uint8_t num_rows, uint8_t current_time) {
-  counters_need_update                 = false;
-  debounce_counter_t *debounce_pointer = debounce_counters;
-  for (uint8_t row = 0; row < num_rows; row++) {
-    for (uint8_t col = 0; col < MATRIX_COLS; col++) {
-      if (*debounce_pointer != DEBOUNCE_ELAPSED) {
-        if (TIMER_DIFF(current_time, *debounce_pointer, MAX_DEBOUNCE) >= DEBOUNCE) {
-          *debounce_pointer = DEBOUNCE_ELAPSED;
-        } else {
-          counters_need_update = true;
+    counters_need_update                 = false;
+    debounce_counter_t *debounce_pointer = debounce_counters;
+    for (uint8_t row = 0; row < num_rows; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+            if (*debounce_pointer != DEBOUNCE_ELAPSED) {
+                if (TIMER_DIFF(current_time, *debounce_pointer, MAX_DEBOUNCE) >= DEBOUNCE) {
+                    *debounce_pointer = DEBOUNCE_ELAPSED;
+                } else {
+                    counters_need_update = true;
+                }
+            }
+            debounce_pointer++;
         }
-      }
-      debounce_pointer++;
     }
-  }
 }
 
 // upload from raw_matrix to final matrix;
 void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) {
-  debounce_counter_t *debounce_pointer = debounce_counters;
-  for (uint8_t row = 0; row < num_rows; row++) {
-    matrix_row_t delta        = raw[row] ^ cooked[row];
-    matrix_row_t existing_row = cooked[row];
-    for (uint8_t col = 0; col < MATRIX_COLS; col++) {
-      matrix_row_t col_mask = (ROW_SHIFTER << col);
-      if ((delta & col_mask) && *debounce_pointer == DEBOUNCE_ELAPSED) {
-        *debounce_pointer    = current_time;
-        counters_need_update = true;
-        existing_row ^= col_mask;  // flip the bit.
-      }
-      debounce_pointer++;
+    debounce_counter_t *debounce_pointer = debounce_counters;
+    for (uint8_t row = 0; row < num_rows; row++) {
+        matrix_row_t delta        = raw[row] ^ cooked[row];
+        matrix_row_t existing_row = cooked[row];
+        for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+            matrix_row_t col_mask = (ROW_SHIFTER << col);
+            if ((delta & col_mask) && *debounce_pointer == DEBOUNCE_ELAPSED) {
+                *debounce_pointer    = current_time;
+                counters_need_update = true;
+                existing_row ^= col_mask;  // flip the bit.
+            }
+            debounce_pointer++;
+        }
+        cooked[row] = existing_row;
     }
-    cooked[row] = existing_row;
-  }
 }
 
 bool debounce_active(void) { return true; }

quantum/debounce/eager_pr.c

@@ -24,7 +24,7 @@ No further inputs are accepted until DEBOUNCE milliseconds have occurred.
 #include <stdlib.h>
 
 #ifndef DEBOUNCE
-#  define DEBOUNCE 5
+#    define DEBOUNCE 5
 #endif
 
 #define debounce_counter_t uint8_t
@@ -40,56 +40,56 @@ void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t n
 
 // we use num_rows rather than MATRIX_ROWS to support split keyboards
 void debounce_init(uint8_t num_rows) {
-  debounce_counters = (debounce_counter_t *)malloc(num_rows * sizeof(debounce_counter_t));
-  for (uint8_t r = 0; r < num_rows; r++) {
-    debounce_counters[r] = DEBOUNCE_ELAPSED;
-  }
+    debounce_counters = (debounce_counter_t *)malloc(num_rows * sizeof(debounce_counter_t));
+    for (uint8_t r = 0; r < num_rows; r++) {
+        debounce_counters[r] = DEBOUNCE_ELAPSED;
+    }
 }
 
 void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) {
-  uint8_t current_time = timer_read() % MAX_DEBOUNCE;
-  bool needed_update = counters_need_update;
-  if (counters_need_update) {
-    update_debounce_counters(num_rows, current_time);
-  }
+    uint8_t current_time  = timer_read() % MAX_DEBOUNCE;
+    bool    needed_update = counters_need_update;
+    if (counters_need_update) {
+        update_debounce_counters(num_rows, current_time);
+    }
 
-  if (changed || (needed_update && !counters_need_update)) {
-    transfer_matrix_values(raw, cooked, num_rows, current_time);
-  }
+    if (changed || (needed_update && !counters_need_update)) {
+        transfer_matrix_values(raw, cooked, num_rows, current_time);
+    }
 }
 
 // If the current time is > debounce counter, set the counter to enable input.
 void update_debounce_counters(uint8_t num_rows, uint8_t current_time) {
-  counters_need_update                 = false;
-  debounce_counter_t *debounce_pointer = debounce_counters;
-  for (uint8_t row = 0; row < num_rows; row++) {
-    if (*debounce_pointer != DEBOUNCE_ELAPSED) {
-      if (TIMER_DIFF(current_time, *debounce_pointer, MAX_DEBOUNCE) >= DEBOUNCE) {
-        *debounce_pointer = DEBOUNCE_ELAPSED;
-      } else {
-        counters_need_update = true;
-      }
+    counters_need_update                 = false;
+    debounce_counter_t *debounce_pointer = debounce_counters;
+    for (uint8_t row = 0; row < num_rows; row++) {
+        if (*debounce_pointer != DEBOUNCE_ELAPSED) {
+            if (TIMER_DIFF(current_time, *debounce_pointer, MAX_DEBOUNCE) >= DEBOUNCE) {
+                *debounce_pointer = DEBOUNCE_ELAPSED;
+            } else {
+                counters_need_update = true;
+            }
+        }
+        debounce_pointer++;
     }
-    debounce_pointer++;
-  }
 }
 
 // upload from raw_matrix to final matrix;
 void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) {
-  debounce_counter_t *debounce_pointer = debounce_counters;
-  for (uint8_t row = 0; row < num_rows; row++) {
-    matrix_row_t existing_row = cooked[row];
-    matrix_row_t raw_row      = raw[row];
+    debounce_counter_t *debounce_pointer = debounce_counters;
+    for (uint8_t row = 0; row < num_rows; row++) {
+        matrix_row_t existing_row = cooked[row];
+        matrix_row_t raw_row      = raw[row];
 
-    // determine new value basd on debounce pointer + raw value
-    if (*debounce_pointer == DEBOUNCE_ELAPSED && (existing_row != raw_row)) {
-      *debounce_pointer    = current_time;
-      cooked[row]          = raw_row;
-      counters_need_update = true;
-    }
+        // determine new value basd on debounce pointer + raw value
+        if (*debounce_pointer == DEBOUNCE_ELAPSED && (existing_row != raw_row)) {
+            *debounce_pointer    = current_time;
+            cooked[row]          = raw_row;
+            counters_need_update = true;
+        }
 
-    debounce_pointer++;
-  }
+        debounce_pointer++;
+    }
 }
 
 bool debounce_active(void) { return true; }

quantum/debounce/sym_g.c

@@ -20,38 +20,33 @@ When no state changes have occured for DEBOUNCE milliseconds, we push the state.
 #include "timer.h"
 #include "quantum.h"
 #ifndef DEBOUNCE
-  #define DEBOUNCE 5
+#    define DEBOUNCE 5
 #endif
 
-void debounce_init(uint8_t num_rows) {}
+void        debounce_init(uint8_t num_rows) {}
 static bool debouncing = false;
 
 #if DEBOUNCE > 0
 static uint16_t debouncing_time;
-void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed)
-{
-  if (changed) {
-    debouncing = true;
-    debouncing_time = timer_read();
-  }
+void            debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) {
+    if (changed) {
+        debouncing      = true;
+        debouncing_time = timer_read();
+    }
 
-  if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
-    for (int i = 0; i < num_rows; i++) {
-      cooked[i] = raw[i];
+    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
+        for (int i = 0; i < num_rows; i++) {
+            cooked[i] = raw[i];
+        }
+        debouncing = false;
     }
-    debouncing = false;
-  }
 }
-#else //no debouncing.
-void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed)
-{
-  for (int i = 0; i < num_rows; i++) {
-    cooked[i] = raw[i];
-  }
+#else  // no debouncing.
+void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) {
+    for (int i = 0; i < num_rows; i++) {
+        cooked[i] = raw[i];
+    }
 }
 #endif
 
-bool debounce_active(void) {
-  return debouncing;
-}
-
+bool debounce_active(void) { return debouncing; }

quantum/dynamic_keymap.c

@@ -15,224 +15,198 @@
  */
 
 #include "config.h"
-#include "keymap.h" // to get keymaps[][][]
+#include "keymap.h"  // to get keymaps[][][]
 #include "tmk_core/common/eeprom.h"
-#include "progmem.h" // to read default from flash
-#include "quantum.h" // for send_string()
+#include "progmem.h"  // to read default from flash
+#include "quantum.h"  // for send_string()
 #include "dynamic_keymap.h"
 
 #ifdef DYNAMIC_KEYMAP_ENABLE
 
-#ifndef DYNAMIC_KEYMAP_EEPROM_ADDR
-#error DYNAMIC_KEYMAP_EEPROM_ADDR not defined
-#endif
+#    ifndef DYNAMIC_KEYMAP_EEPROM_ADDR
+#        error DYNAMIC_KEYMAP_EEPROM_ADDR not defined
+#    endif
 
-#ifndef DYNAMIC_KEYMAP_LAYER_COUNT
-#error DYNAMIC_KEYMAP_LAYER_COUNT not defined
-#endif
+#    ifndef DYNAMIC_KEYMAP_LAYER_COUNT
+#        error DYNAMIC_KEYMAP_LAYER_COUNT not defined
+#    endif
 
-#ifndef DYNAMIC_KEYMAP_MACRO_COUNT
-#error DYNAMIC_KEYMAP_MACRO_COUNT not defined
-#endif
+#    ifndef DYNAMIC_KEYMAP_MACRO_COUNT
+#        error DYNAMIC_KEYMAP_MACRO_COUNT not defined
+#    endif
 
-#ifndef DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
-#error DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR not defined
-#endif
+#    ifndef DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
+#        error DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR not defined
+#    endif
 
-#ifndef DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE
-#error DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE not defined
-#endif
+#    ifndef DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE
+#        error DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE not defined
+#    endif
 
-uint8_t dynamic_keymap_get_layer_count(void)
-{
-	return DYNAMIC_KEYMAP_LAYER_COUNT;
-}
+uint8_t dynamic_keymap_get_layer_count(void) { return DYNAMIC_KEYMAP_LAYER_COUNT; }
 
-void *dynamic_keymap_key_to_eeprom_address(uint8_t layer, uint8_t row, uint8_t column)
-{
-	// TODO: optimize this with some left shifts
-	return ((void*)DYNAMIC_KEYMAP_EEPROM_ADDR) + ( layer * MATRIX_ROWS * MATRIX_COLS * 2 ) +
-		( row * MATRIX_COLS * 2 ) + ( column * 2 );
+void *dynamic_keymap_key_to_eeprom_address(uint8_t layer, uint8_t row, uint8_t column) {
+    // TODO: optimize this with some left shifts
+    return ((void *)DYNAMIC_KEYMAP_EEPROM_ADDR) + (layer * MATRIX_ROWS * MATRIX_COLS * 2) + (row * MATRIX_COLS * 2) + (column * 2);
 }
 
-uint16_t dynamic_keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t column)
-{
-	void *address = dynamic_keymap_key_to_eeprom_address(layer, row, column);
-	// Big endian, so we can read/write EEPROM directly from host if we want
-	uint16_t keycode = eeprom_read_byte(address) << 8;
-	keycode |= eeprom_read_byte(address + 1);
-	return keycode;
+uint16_t dynamic_keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t column) {
+    void *address = dynamic_keymap_key_to_eeprom_address(layer, row, column);
+    // Big endian, so we can read/write EEPROM directly from host if we want
+    uint16_t keycode = eeprom_read_byte(address) << 8;
+    keycode |= eeprom_read_byte(address + 1);
+    return keycode;
 }
 
-void dynamic_keymap_set_keycode(uint8_t layer, uint8_t row, uint8_t column, uint16_t keycode)
-{
-	void *address = dynamic_keymap_key_to_eeprom_address(layer, row, column);
-	// Big endian, so we can read/write EEPROM directly from host if we want
-	eeprom_update_byte(address, (uint8_t)(keycode >> 8));
-	eeprom_update_byte(address+1, (uint8_t)(keycode & 0xFF));
+void dynamic_keymap_set_keycode(uint8_t layer, uint8_t row, uint8_t column, uint16_t keycode) {
+    void *address = dynamic_keymap_key_to_eeprom_address(layer, row, column);
+    // Big endian, so we can read/write EEPROM directly from host if we want
+    eeprom_update_byte(address, (uint8_t)(keycode >> 8));
+    eeprom_update_byte(address + 1, (uint8_t)(keycode & 0xFF));
 }
 
-void dynamic_keymap_reset(void)
-{
-	// Reset the keymaps in EEPROM to what is in flash.
-	// All keyboards using dynamic keymaps should define a layout
-	// for the same number of layers as DYNAMIC_KEYMAP_LAYER_COUNT.
-	for ( int layer = 0; layer < DYNAMIC_KEYMAP_LAYER_COUNT; layer++ )	{
-		for ( int row = 0; row < MATRIX_ROWS; row++ ) {
-			for ( int column = 0; column < MATRIX_COLS; column++ )	{
-				dynamic_keymap_set_keycode(layer, row, column, pgm_read_word(&keymaps[layer][row][column]));
-			}
-		}
-	}
+void dynamic_keymap_reset(void) {
+    // Reset the keymaps in EEPROM to what is in flash.
+    // All keyboards using dynamic keymaps should define a layout
+    // for the same number of layers as DYNAMIC_KEYMAP_LAYER_COUNT.
+    for (int layer = 0; layer < DYNAMIC_KEYMAP_LAYER_COUNT; layer++) {
+        for (int row = 0; row < MATRIX_ROWS; row++) {
+            for (int column = 0; column < MATRIX_COLS; column++) {
+                dynamic_keymap_set_keycode(layer, row, column, pgm_read_word(&keymaps[layer][row][column]));
+            }
+        }
+    }
 }
 
-void dynamic_keymap_get_buffer( uint16_t offset, uint16_t size, uint8_t *data )
-{
-	uint16_t dynamic_keymap_eeprom_size = DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2;
-	void *source = (void*)(DYNAMIC_KEYMAP_EEPROM_ADDR+offset);
-	uint8_t *target = data;
-	for ( uint16_t i = 0; i < size; i++ ) {
-		if ( offset + i < dynamic_keymap_eeprom_size ) {
-			*target = eeprom_read_byte(source);
-		} else {
-			*target = 0x00;
-		}
-		source++;
-		target++;
-	}
+void dynamic_keymap_get_buffer(uint16_t offset, uint16_t size, uint8_t *data) {
+    uint16_t dynamic_keymap_eeprom_size = DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2;
+    void *   source                     = (void *)(DYNAMIC_KEYMAP_EEPROM_ADDR + offset);
+    uint8_t *target                     = data;
+    for (uint16_t i = 0; i < size; i++) {
+        if (offset + i < dynamic_keymap_eeprom_size) {
+            *target = eeprom_read_byte(source);
+        } else {
+            *target = 0x00;
+        }
+        source++;
+        target++;
+    }
 }
 
-void dynamic_keymap_set_buffer( uint16_t offset, uint16_t size, uint8_t *data )
-{
-	uint16_t dynamic_keymap_eeprom_size = DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2;
-	void *target = (void*)(DYNAMIC_KEYMAP_EEPROM_ADDR+offset);
-	uint8_t *source = data;
-	for ( uint16_t i = 0; i < size; i++ ) {
-		if ( offset + i < dynamic_keymap_eeprom_size ) {
-			eeprom_update_byte(target, *source);
-		}
-		source++;
-		target++;
-	}
+void dynamic_keymap_set_buffer(uint16_t offset, uint16_t size, uint8_t *data) {
+    uint16_t dynamic_keymap_eeprom_size = DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2;
+    void *   target                     = (void *)(DYNAMIC_KEYMAP_EEPROM_ADDR + offset);
+    uint8_t *source                     = data;
+    for (uint16_t i = 0; i < size; i++) {
+        if (offset + i < dynamic_keymap_eeprom_size) {
+            eeprom_update_byte(target, *source);
+        }
+        source++;
+        target++;
+    }
 }
 
 // This overrides the one in quantum/keymap_common.c
-uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
-	if ( layer < DYNAMIC_KEYMAP_LAYER_COUNT &&
-			key.row < MATRIX_ROWS &&
-			key.col < MATRIX_COLS ) {
-		return dynamic_keymap_get_keycode(layer, key.row, key.col);
-	} else {
-		return KC_NO;
-	}
-}
-
-
-
-uint8_t dynamic_keymap_macro_get_count(void)
-{
-	return DYNAMIC_KEYMAP_MACRO_COUNT;
-}
-
-uint16_t dynamic_keymap_macro_get_buffer_size(void)
-{
-	return DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE;
+uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key) {
+    if (layer < DYNAMIC_KEYMAP_LAYER_COUNT && key.row < MATRIX_ROWS && key.col < MATRIX_COLS) {
+        return dynamic_keymap_get_keycode(layer, key.row, key.col);
+    } else {
+        return KC_NO;
+    }
 }
 
-void dynamic_keymap_macro_get_buffer( uint16_t offset, uint16_t size, uint8_t *data )
-{
-	void *source = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR+offset);
-	uint8_t *target = data;
-	for ( uint16_t i = 0; i < size; i++ ) {
-		if ( offset + i < DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE ) {
-			*target = eeprom_read_byte(source);
-		} else {
-			*target = 0x00;
-		}
-		source++;
-		target++;
-	}
+uint8_t dynamic_keymap_macro_get_count(void) { return DYNAMIC_KEYMAP_MACRO_COUNT; }
+
+uint16_t dynamic_keymap_macro_get_buffer_size(void) { return DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE; }
+
+void dynamic_keymap_macro_get_buffer(uint16_t offset, uint16_t size, uint8_t *data) {
+    void *   source = (void *)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + offset);
+    uint8_t *target = data;
+    for (uint16_t i = 0; i < size; i++) {
+        if (offset + i < DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE) {
+            *target = eeprom_read_byte(source);
+        } else {
+            *target = 0x00;
+        }
+        source++;
+        target++;
+    }
 }
 
-void dynamic_keymap_macro_set_buffer( uint16_t offset, uint16_t size, uint8_t *data )
-{
-	void *target = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR+offset);
-	uint8_t *source = data;
-	for ( uint16_t i = 0; i < size; i++ ) {
-		if ( offset + i < DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE ) {
-			eeprom_update_byte(target, *source);
-		}
-		source++;
-		target++;
-	}
+void dynamic_keymap_macro_set_buffer(uint16_t offset, uint16_t size, uint8_t *data) {
+    void *   target = (void *)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + offset);
+    uint8_t *source = data;
+    for (uint16_t i = 0; i < size; i++) {
+        if (offset + i < DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE) {
+            eeprom_update_byte(target, *source);
+        }
+        source++;
+        target++;
+    }
 }
 
-void dynamic_keymap_macro_reset(void)
-{
-	void *p = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR);
-	void *end = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR+DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE);
-	while ( p != end ) {
-		eeprom_update_byte(p, 0);
-		++p;
-	}
+void dynamic_keymap_macro_reset(void) {
+    void *p   = (void *)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR);
+    void *end = (void *)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE);
+    while (p != end) {
+        eeprom_update_byte(p, 0);
+        ++p;
+    }
 }
 
-void dynamic_keymap_macro_send( uint8_t id )
-{
-	if ( id >= DYNAMIC_KEYMAP_MACRO_COUNT )	{
-		return;
-	}
-
-	// Check the last byte of the buffer.
-	// If it's not zero, then we are in the middle
-	// of buffer writing, possibly an aborted buffer
-	// write. So do nothing.
-	void *p = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR+DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE-1);
-	if ( eeprom_read_byte(p) != 0 )	{
-		return;
-	}
-
-	// Skip N null characters
-	// p will then point to the Nth macro
-	p = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR);
-	void *end = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR+DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE);
-	while ( id > 0 ) {
-		// If we are past the end of the buffer, then the buffer
-		// contents are garbage, i.e. there were not DYNAMIC_KEYMAP_MACRO_COUNT
-		// nulls in the buffer.
-		if ( p == end ) {
-			return;
-		}
-		if ( eeprom_read_byte(p) == 0 ) {
-			--id;
-		}
-		++p;
-	}
-
-	// Send the macro string one or two chars at a time
-	// by making temporary 1 or 2 char strings
-	char data[3] = { 0, 0, 0 };
-	// We already checked there was a null at the end of
-	// the buffer, so this cannot go past the end
-	while ( 1 ) {
-		data[0] = eeprom_read_byte(p++);
-		data[1] = 0;
-		// Stop at the null terminator of this macro string
-		if ( data[0] == 0 ) {
-			break;
-		}
-		// If the char is magic (tap, down, up),
-		// add the next char (key to use) and send a 2 char string.
-		if ( data[0] == SS_TAP_CODE || data[0] == SS_DOWN_CODE || data[0] == SS_UP_CODE ) {
-			data[1] = eeprom_read_byte(p++);
-			if ( data[1] == 0 ) {
-				break;
-			}
-		}
-		send_string(data);
-	}
+void dynamic_keymap_macro_send(uint8_t id) {
+    if (id >= DYNAMIC_KEYMAP_MACRO_COUNT) {
+        return;
+    }
+
+    // Check the last byte of the buffer.
+    // If it's not zero, then we are in the middle
+    // of buffer writing, possibly an aborted buffer
+    // write. So do nothing.
+    void *p = (void *)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE - 1);
+    if (eeprom_read_byte(p) != 0) {
+        return;
+    }
+
+    // Skip N null characters
+    // p will then point to the Nth macro
+    p         = (void *)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR);
+    void *end = (void *)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE);
+    while (id > 0) {
+        // If we are past the end of the buffer, then the buffer
+        // contents are garbage, i.e. there were not DYNAMIC_KEYMAP_MACRO_COUNT
+        // nulls in the buffer.
+        if (p == end) {
+            return;
+        }
+        if (eeprom_read_byte(p) == 0) {
+            --id;
+        }
+        ++p;
+    }
+
+    // Send the macro string one or two chars at a time
+    // by making temporary 1 or 2 char strings
+    char data[3] = {0, 0, 0};
+    // We already checked there was a null at the end of
+    // the buffer, so this cannot go past the end
+    while (1) {
+        data[0] = eeprom_read_byte(p++);
+        data[1] = 0;
+        // Stop at the null terminator of this macro string
+        if (data[0] == 0) {
+            break;
+        }
+        // If the char is magic (tap, down, up),
+        // add the next char (key to use) and send a 2 char string.
+        if (data[0] == SS_TAP_CODE || data[0] == SS_DOWN_CODE || data[0] == SS_UP_CODE) {
+            data[1] = eeprom_read_byte(p++);
+            if (data[1] == 0) {
+                break;
+            }
+        }
+        send_string(data);
+    }
 }
 
-#endif // DYNAMIC_KEYMAP_ENABLE
-
+#endif  // DYNAMIC_KEYMAP_ENABLE

quantum/dynamic_keymap.h

@@ -18,11 +18,11 @@
 #include <stdint.h>
 #include <stdbool.h>
 
-uint8_t dynamic_keymap_get_layer_count(void);
-void *dynamic_keymap_key_to_eeprom_address(uint8_t layer, uint8_t row, uint8_t column);
+uint8_t  dynamic_keymap_get_layer_count(void);
+void *   dynamic_keymap_key_to_eeprom_address(uint8_t layer, uint8_t row, uint8_t column);
 uint16_t dynamic_keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t column);
-void dynamic_keymap_set_keycode(uint8_t layer, uint8_t row, uint8_t column, uint16_t keycode);
-void dynamic_keymap_reset(void);
+void     dynamic_keymap_set_keycode(uint8_t layer, uint8_t row, uint8_t column, uint16_t keycode);
+void     dynamic_keymap_reset(void);
 // These get/set the keycodes as stored in the EEPROM buffer
 // Data is big-endian 16-bit values (the keycodes)
 // Order is by layer/row/column
@@ -31,14 +31,12 @@ void dynamic_keymap_reset(void);
 // This is only really useful for host applications that want to get a whole keymap fast,
 // by reading 14 keycodes (28 bytes) at a time, reducing the number of raw HID transfers by
 // a factor of 14.
-void dynamic_keymap_get_buffer( uint16_t offset, uint16_t size, uint8_t *data );
-void dynamic_keymap_set_buffer( uint16_t offset, uint16_t size, uint8_t *data );
+void dynamic_keymap_get_buffer(uint16_t offset, uint16_t size, uint8_t *data);
+void dynamic_keymap_set_buffer(uint16_t offset, uint16_t size, uint8_t *data);
 
 // This overrides the one in quantum/keymap_common.c
 // uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key);
 
-
-
 // Note regarding dynamic_keymap_macro_set_buffer():
 // The last byte of the buffer is used as a valid flag,
 // so macro sending is disabled during writing a new buffer,
@@ -53,11 +51,10 @@ void dynamic_keymap_set_buffer( uint16_t offset, uint16_t size, uint8_t *data );
 // and it not being null means the buffer can be considered in an
 // invalid state.
 
-uint8_t dynamic_keymap_macro_get_count(void);
+uint8_t  dynamic_keymap_macro_get_count(void);
 uint16_t dynamic_keymap_macro_get_buffer_size(void);
-void dynamic_keymap_macro_get_buffer( uint16_t offset, uint16_t size, uint8_t *data );
-void dynamic_keymap_macro_set_buffer( uint16_t offset, uint16_t size, uint8_t *data );
-void dynamic_keymap_macro_reset(void);
-
-void dynamic_keymap_macro_send( uint8_t id );
+void     dynamic_keymap_macro_get_buffer(uint16_t offset, uint16_t size, uint8_t *data);
+void     dynamic_keymap_macro_set_buffer(uint16_t offset, uint16_t size, uint8_t *data);
+void     dynamic_keymap_macro_reset(void);
 
+void dynamic_keymap_macro_send(uint8_t id);

quantum/dynamic_macro.h

@@ -30,7 +30,7 @@
  * there have been reports of it being too much in some users' cases,
  * so 128 is considered a safe default.
  */
-#define DYNAMIC_MACRO_SIZE 128
+#    define DYNAMIC_MACRO_SIZE 128
 #endif
 
 /* DYNAMIC_MACRO_RANGE must be set as the last element of user's
@@ -46,8 +46,7 @@ enum dynamic_macro_keycodes {
 };
 
 /* Blink the LEDs to notify the user about some event. */
-void dynamic_macro_led_blink(void)
-{
+void dynamic_macro_led_blink(void) {
 #ifdef BACKLIGHT_ENABLE
     backlight_toggle();
     wait_ms(100);
@@ -59,10 +58,8 @@ void dynamic_macro_led_blink(void)
  * need a `direction` variable accessible at the call site.
  */
 #define DYNAMIC_MACRO_CURRENT_SLOT() (direction > 0 ? 1 : 2)
-#define DYNAMIC_MACRO_CURRENT_LENGTH(BEGIN, POINTER) \
-    ((int)(direction * ((POINTER) - (BEGIN))))
-#define DYNAMIC_MACRO_CURRENT_CAPACITY(BEGIN, END2) \
-    ((int)(direction * ((END2) - (BEGIN)) + 1))
+#define DYNAMIC_MACRO_CURRENT_LENGTH(BEGIN, POINTER) ((int)(direction * ((POINTER) - (BEGIN))))
+#define DYNAMIC_MACRO_CURRENT_CAPACITY(BEGIN, END2) ((int)(direction * ((END2) - (BEGIN)) + 1))
 
 /**
  * Start recording of the dynamic macro.
@@ -70,9 +67,7 @@ void dynamic_macro_led_blink(void)
  * @param[out] macro_pointer The new macro buffer iterator.
  * @param[in]  macro_buffer  The macro buffer used to initialize macro_pointer.
  */
-void dynamic_macro_record_start(
-    keyrecord_t **macro_pointer, keyrecord_t *macro_buffer)
-{
+void dynamic_macro_record_start(keyrecord_t **macro_pointer, keyrecord_t *macro_buffer) {
     dprintln("dynamic macro recording: started");
 
     dynamic_macro_led_blink();
@@ -89,9 +84,7 @@ void dynamic_macro_record_start(
  * @param macro_end[in]    The element after the last macro buffer element.
  * @param direction[in]    Either +1 or -1, which way to iterate the buffer.
  */
-void dynamic_macro_play(
-    keyrecord_t *macro_buffer, keyrecord_t *macro_end, int8_t direction)
-{
+void dynamic_macro_play(keyrecord_t *macro_buffer, keyrecord_t *macro_end, int8_t direction) {
     dprintf("dynamic macro: slot %d playback\n", DYNAMIC_MACRO_CURRENT_SLOT());
 
     uint32_t saved_layer_state = layer_state;
@@ -118,13 +111,7 @@ void dynamic_macro_play(
  * @param direction[in]  Either +1 or -1, which way to iterate the buffer.
  * @param record[in]     The current keypress.
  */
-void dynamic_macro_record_key(
-    keyrecord_t *macro_buffer,
-    keyrecord_t **macro_pointer,
-    keyrecord_t *macro2_end,
-    int8_t direction,
-    keyrecord_t *record)
-{
+void dynamic_macro_record_key(keyrecord_t *macro_buffer, keyrecord_t **macro_pointer, keyrecord_t *macro2_end, int8_t direction, keyrecord_t *record) {
     /* If we've just started recording, ignore all the key releases. */
     if (!record->event.pressed && *macro_pointer == macro_buffer) {
         dprintln("dynamic macro: ignoring a leading key-up event");
@@ -141,38 +128,25 @@ void dynamic_macro_record_key(
         dynamic_macro_led_blink();
     }
 
-    dprintf(
-        "dynamic macro: slot %d length: %d/%d\n",
-        DYNAMIC_MACRO_CURRENT_SLOT(),
-        DYNAMIC_MACRO_CURRENT_LENGTH(macro_buffer, *macro_pointer),
-        DYNAMIC_MACRO_CURRENT_CAPACITY(macro_buffer, macro2_end));
+    dprintf("dynamic macro: slot %d length: %d/%d\n", DYNAMIC_MACRO_CURRENT_SLOT(), DYNAMIC_MACRO_CURRENT_LENGTH(macro_buffer, *macro_pointer), DYNAMIC_MACRO_CURRENT_CAPACITY(macro_buffer, macro2_end));
 }
 
 /**
  * End recording of the dynamic macro. Essentially just update the
  * pointer to the end of the macro.
  */
-void dynamic_macro_record_end(
-    keyrecord_t *macro_buffer,
-    keyrecord_t *macro_pointer,
-    int8_t direction,
-    keyrecord_t **macro_end)
-{
+void dynamic_macro_record_end(keyrecord_t *macro_buffer, keyrecord_t *macro_pointer, int8_t direction, keyrecord_t **macro_end) {
     dynamic_macro_led_blink();
 
     /* Do not save the keys being held when stopping the recording,
      * i.e. the keys used to access the layer DYN_REC_STOP is on.
      */
-    while (macro_pointer != macro_buffer &&
-           (macro_pointer - direction)->event.pressed) {
+    while (macro_pointer != macro_buffer && (macro_pointer - direction)->event.pressed) {
         dprintln("dynamic macro: trimming a trailing key-down event");
         macro_pointer -= direction;
     }
 
-    dprintf(
-        "dynamic macro: slot %d saved, length: %d\n",
-        DYNAMIC_MACRO_CURRENT_SLOT(),
-        DYNAMIC_MACRO_CURRENT_LENGTH(macro_buffer, macro_pointer));
+    dprintf("dynamic macro: slot %d saved, length: %d\n", DYNAMIC_MACRO_CURRENT_SLOT(), DYNAMIC_MACRO_CURRENT_LENGTH(macro_buffer, macro_pointer));
 
     *macro_end = macro_pointer;
 }
@@ -187,8 +161,7 @@ void dynamic_macro_record_end(
  *       <...THE REST OF THE FUNCTION...>
  *   }
  */
-bool process_record_dynamic_macro(uint16_t keycode, keyrecord_t *record)
-{
+bool process_record_dynamic_macro(uint16_t keycode, keyrecord_t *record) {
     /* Both macros use the same buffer but read/write on different
      * ends of it.
      *
@@ -239,57 +212,57 @@ bool process_record_dynamic_macro(uint16_t keycode, keyrecord_t *record)
         /* No macro recording in progress. */
         if (!record->event.pressed) {
             switch (keycode) {
-            case DYN_REC_START1:
-                dynamic_macro_record_start(&macro_pointer, macro_buffer);
-                macro_id = 1;
-                return false;
-            case DYN_REC_START2:
-                dynamic_macro_record_start(&macro_pointer, r_macro_buffer);
-                macro_id = 2;
-                return false;
-            case DYN_MACRO_PLAY1:
-                dynamic_macro_play(macro_buffer, macro_end, +1);
-                return false;
-            case DYN_MACRO_PLAY2:
-                dynamic_macro_play(r_macro_buffer, r_macro_end, -1);
-                return false;
+                case DYN_REC_START1:
+                    dynamic_macro_record_start(&macro_pointer, macro_buffer);
+                    macro_id = 1;
+                    return false;
+                case DYN_REC_START2:
+                    dynamic_macro_record_start(&macro_pointer, r_macro_buffer);
+                    macro_id = 2;
+                    return false;
+                case DYN_MACRO_PLAY1:
+                    dynamic_macro_play(macro_buffer, macro_end, +1);
+                    return false;
+                case DYN_MACRO_PLAY2:
+                    dynamic_macro_play(r_macro_buffer, r_macro_end, -1);
+                    return false;
             }
         }
     } else {
         /* A macro is being recorded right now. */
         switch (keycode) {
-        case DYN_REC_STOP:
-            /* Stop the macro recording. */
-            if (record->event.pressed) { /* Ignore the initial release
-                                          * just after the recoding
-                                          * starts. */
+            case DYN_REC_STOP:
+                /* Stop the macro recording. */
+                if (record->event.pressed) { /* Ignore the initial release
+                                              * just after the recoding
+                                              * starts. */
+                    switch (macro_id) {
+                        case 1:
+                            dynamic_macro_record_end(macro_buffer, macro_pointer, +1, &macro_end);
+                            break;
+                        case 2:
+                            dynamic_macro_record_end(r_macro_buffer, macro_pointer, -1, &r_macro_end);
+                            break;
+                    }
+                    macro_id = 0;
+                }
+                return false;
+            case DYN_MACRO_PLAY1:
+            case DYN_MACRO_PLAY2:
+                dprintln("dynamic macro: ignoring macro play key while recording");
+                return false;
+            default:
+                /* Store the key in the macro buffer and process it normally. */
                 switch (macro_id) {
-                case 1:
-                    dynamic_macro_record_end(macro_buffer, macro_pointer, +1, &macro_end);
-                    break;
-                case 2:
-                    dynamic_macro_record_end(r_macro_buffer, macro_pointer, -1, &r_macro_end);
-                    break;
+                    case 1:
+                        dynamic_macro_record_key(macro_buffer, &macro_pointer, r_macro_end, +1, record);
+                        break;
+                    case 2:
+                        dynamic_macro_record_key(r_macro_buffer, &macro_pointer, macro_end, -1, record);
+                        break;
                 }
-                macro_id = 0;
-            }
-            return false;
-        case DYN_MACRO_PLAY1:
-        case DYN_MACRO_PLAY2:
-            dprintln("dynamic macro: ignoring macro play key while recording");
-            return false;
-        default:
-            /* Store the key in the macro buffer and process it normally. */
-            switch (macro_id) {
-            case 1:
-                dynamic_macro_record_key(macro_buffer, &macro_pointer, r_macro_end, +1, record);
-                break;
-            case 2:
-                dynamic_macro_record_key(r_macro_buffer, &macro_pointer, macro_end, -1, record);
+                return true;
                 break;
-            }
-            return true;
-            break;
         }
     }
 

quantum/encoder.c

@@ -20,23 +20,22 @@
 // for memcpy
 #include <string.h>
 
-
 #ifndef ENCODER_RESOLUTION
-  #define ENCODER_RESOLUTION 4
+#    define ENCODER_RESOLUTION 4
 #endif
 
 #ifndef NUMBER_OF_ENCODERS
-  #error "Number of encoders not defined by NUMBER_OF_ENCODERS"
+#    error "Number of encoders not defined by NUMBER_OF_ENCODERS"
 #endif
 
 #if !defined(ENCODERS_PAD_A) || !defined(ENCODERS_PAD_B)
-  #error "No encoder pads defined by ENCODERS_PAD_A and ENCODERS_PAD_B"
+#    error "No encoder pads defined by ENCODERS_PAD_A and ENCODERS_PAD_B"
 #endif
 
 static pin_t encoders_pad_a[NUMBER_OF_ENCODERS] = ENCODERS_PAD_A;
 static pin_t encoders_pad_b[NUMBER_OF_ENCODERS] = ENCODERS_PAD_B;
 
-static int8_t encoder_LUT[] = { 0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0 };
+static int8_t encoder_LUT[] = {0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0};
 
 static uint8_t encoder_state[NUMBER_OF_ENCODERS] = {0};
 
@@ -47,53 +46,47 @@ static int8_t encoder_value[NUMBER_OF_ENCODERS * 2] = {0};
 static int8_t encoder_value[NUMBER_OF_ENCODERS] = {0};
 #endif
 
-__attribute__ ((weak))
-void encoder_update_user(int8_t index, bool clockwise) { }
+__attribute__((weak)) void encoder_update_user(int8_t index, bool clockwise) {}
 
-__attribute__ ((weak))
-void encoder_update_kb(int8_t index, bool clockwise) {
-  encoder_update_user(index, clockwise);
-}
+__attribute__((weak)) void encoder_update_kb(int8_t index, bool clockwise) { encoder_update_user(index, clockwise); }
 
 void encoder_init(void) {
-  for (int i = 0; i < NUMBER_OF_ENCODERS; i++) {
-    setPinInputHigh(encoders_pad_a[i]);
-    setPinInputHigh(encoders_pad_b[i]);
+    for (int i = 0; i < NUMBER_OF_ENCODERS; i++) {
+        setPinInputHigh(encoders_pad_a[i]);
+        setPinInputHigh(encoders_pad_b[i]);
 
-    encoder_state[i] = (readPin(encoders_pad_a[i]) << 0) | (readPin(encoders_pad_b[i]) << 1);
-  }
+        encoder_state[i] = (readPin(encoders_pad_a[i]) << 0) | (readPin(encoders_pad_b[i]) << 1);
+    }
 }
 
 void encoder_read(void) {
-  for (int i = 0; i < NUMBER_OF_ENCODERS; i++) {
-    encoder_state[i] <<= 2;
-    encoder_state[i] |= (readPin(encoders_pad_a[i]) << 0) | (readPin(encoders_pad_b[i]) << 1);
-    encoder_value[i] += encoder_LUT[encoder_state[i] & 0xF];
-    if (encoder_value[i] >= ENCODER_RESOLUTION) {
-        encoder_update_kb(i, false);
+    for (int i = 0; i < NUMBER_OF_ENCODERS; i++) {
+        encoder_state[i] <<= 2;
+        encoder_state[i] |= (readPin(encoders_pad_a[i]) << 0) | (readPin(encoders_pad_b[i]) << 1);
+        encoder_value[i] += encoder_LUT[encoder_state[i] & 0xF];
+        if (encoder_value[i] >= ENCODER_RESOLUTION) {
+            encoder_update_kb(i, false);
+        }
+        if (encoder_value[i] <= -ENCODER_RESOLUTION) {  // direction is arbitrary here, but this clockwise
+            encoder_update_kb(i, true);
+        }
+        encoder_value[i] %= ENCODER_RESOLUTION;
     }
-    if (encoder_value[i] <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise
-        encoder_update_kb(i, true);
-    }
-    encoder_value[i] %= ENCODER_RESOLUTION;
-  }
 }
 
 #ifdef SPLIT_KEYBOARD
-void encoder_state_raw(uint8_t* slave_state) {
-  memcpy(slave_state, encoder_state, sizeof(encoder_state));
-}
+void encoder_state_raw(uint8_t* slave_state) { memcpy(slave_state, encoder_state, sizeof(encoder_state)); }
 
 void encoder_update_raw(uint8_t* slave_state) {
-  for (int i = 0; i < NUMBER_OF_ENCODERS; i++) {
-    encoder_value[NUMBER_OF_ENCODERS + i] += encoder_LUT[slave_state[i] & 0xF];
-    if (encoder_value[NUMBER_OF_ENCODERS + i] >= ENCODER_RESOLUTION) {
-        encoder_update_kb(NUMBER_OF_ENCODERS + i, false);
-    }
-    if (encoder_value[NUMBER_OF_ENCODERS + i] <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise
-        encoder_update_kb(NUMBER_OF_ENCODERS + i, true);
+    for (int i = 0; i < NUMBER_OF_ENCODERS; i++) {
+        encoder_value[NUMBER_OF_ENCODERS + i] += encoder_LUT[slave_state[i] & 0xF];
+        if (encoder_value[NUMBER_OF_ENCODERS + i] >= ENCODER_RESOLUTION) {
+            encoder_update_kb(NUMBER_OF_ENCODERS + i, false);
+        }
+        if (encoder_value[NUMBER_OF_ENCODERS + i] <= -ENCODER_RESOLUTION) {  // direction is arbitrary here, but this clockwise
+            encoder_update_kb(NUMBER_OF_ENCODERS + i, true);
+        }
+        encoder_value[NUMBER_OF_ENCODERS + i] %= ENCODER_RESOLUTION;
     }
-    encoder_value[NUMBER_OF_ENCODERS + i] %= ENCODER_RESOLUTION;
-  }
 }
 #endif

quantum/fauxclicky.c

@@ -20,23 +20,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <stdbool.h>
 #include <musical_notes.h>
 
-bool fauxclicky_enabled = true;
-uint16_t note_start = 0;
-bool note_playing = false;
-uint16_t note_period = 0;
+bool     fauxclicky_enabled = true;
+uint16_t note_start         = 0;
+bool     note_playing       = false;
+uint16_t note_period        = 0;
 
-void fauxclicky_init()
-{
+void fauxclicky_init() {
     // Set port PC6 (OC3A and /OC4A) as output
     DDRC |= _BV(PORTC6);
 
     // TCCR3A / TCCR3B: Timer/Counter #3 Control Registers
     TCCR3A = (0 << COM3A1) | (0 << COM3A0) | (1 << WGM31) | (0 << WGM30);
-    TCCR3B = (1 << WGM33)  | (1 << WGM32)  | (0 << CS32)  | (1 << CS31) | (0 << CS30);
+    TCCR3B = (1 << WGM33) | (1 << WGM32) | (0 << CS32) | (1 << CS31) | (0 << CS30);
 }
 
-void fauxclicky_stop()
-{
+void fauxclicky_stop() {
     FAUXCLICKY_DISABLE_OUTPUT;
     note_playing = false;
 }
@@ -45,10 +43,10 @@ void fauxclicky_play(float note[]) {
     if (!fauxclicky_enabled) return;
     if (note_playing) fauxclicky_stop();
     FAUXCLICKY_TIMER_PERIOD = (uint16_t)(((float)F_CPU) / (note[0] * (float)FAUXCLICKY_CPU_PRESCALER));
-    FAUXCLICKY_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (note[0] * (float)FAUXCLICKY_CPU_PRESCALER)) / (float)2);
-    note_playing = true;
-    note_period = (note[1] / (float)16) * ((float)60 / (float)FAUXCLICKY_TEMPO) * 1000;
-    note_start = timer_read();
+    FAUXCLICKY_DUTY_CYCLE   = (uint16_t)((((float)F_CPU) / (note[0] * (float)FAUXCLICKY_CPU_PRESCALER)) / (float)2);
+    note_playing            = true;
+    note_period             = (note[1] / (float)16) * ((float)60 / (float)FAUXCLICKY_TEMPO) * 1000;
+    note_start              = timer_read();
     FAUXCLICKY_ENABLE_OUTPUT;
 }
 

quantum/fauxclicky.h

@@ -14,18 +14,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #ifdef AUDIO_ENABLE
-#error "AUDIO_ENABLE and FAUXCLICKY_ENABLE cannot be both enabled"
+#    error "AUDIO_ENABLE and FAUXCLICKY_ENABLE cannot be both enabled"
 #endif
 
 #include "musical_notes.h"
 #include "stdbool.h"
 
-__attribute__ ((weak))
-float fauxclicky_pressed_note[2] = MUSICAL_NOTE(_D4, 0.25);
-__attribute__ ((weak))
-float fauxclicky_released_note[2] = MUSICAL_NOTE(_C4, 0.125);
-__attribute__ ((weak))
-float fauxclicky_beep_note[2] = MUSICAL_NOTE(_C4, 0.25);
+__attribute__((weak)) float fauxclicky_pressed_note[2]  = MUSICAL_NOTE(_D4, 0.25);
+__attribute__((weak)) float fauxclicky_released_note[2] = MUSICAL_NOTE(_C4, 0.125);
+__attribute__((weak)) float fauxclicky_beep_note[2]     = MUSICAL_NOTE(_C4, 0.25);
 
 bool fauxclicky_enabled;
 
@@ -34,7 +31,7 @@ bool fauxclicky_enabled;
 //
 
 #ifndef FAUXCLICKY_TEMPO
-#define FAUXCLICKY_TEMPO TEMPO_DEFAULT
+#    define FAUXCLICKY_TEMPO TEMPO_DEFAULT
 #endif
 
 // beep on press
@@ -50,42 +47,44 @@ bool fauxclicky_enabled;
 #define FAUXCLICKY_ON fauxclicky_enabled = true
 
 // disable
-#define FAUXCLICKY_OFF do { \
-    fauxclicky_enabled = false; \
-    fauxclicky_stop(); \
-} while (0)
+#define FAUXCLICKY_OFF              \
+    do {                            \
+        fauxclicky_enabled = false; \
+        fauxclicky_stop();          \
+    } while (0)
 
 // toggle
-#define FAUXCLICKY_TOGGLE do { \
-    if (fauxclicky_enabled) { \
-        FAUXCLICKY_OFF; \
-    } else { \
-        FAUXCLICKY_ON; \
-    } \
-} while (0)
+#define FAUXCLICKY_TOGGLE         \
+    do {                          \
+        if (fauxclicky_enabled) { \
+            FAUXCLICKY_OFF;       \
+        } else {                  \
+            FAUXCLICKY_ON;        \
+        }                         \
+    } while (0)
 
 //
 // pin configuration
 //
 
 #ifndef FAUXCLICKY_CPU_PRESCALER
-#define FAUXCLICKY_CPU_PRESCALER 8
+#    define FAUXCLICKY_CPU_PRESCALER 8
 #endif
 
 #ifndef FAUXCLICKY_ENABLE_OUTPUT
-#define FAUXCLICKY_ENABLE_OUTPUT TCCR3A |= _BV(COM3A1)
+#    define FAUXCLICKY_ENABLE_OUTPUT TCCR3A |= _BV(COM3A1)
 #endif
 
 #ifndef FAUXCLICKY_DISABLE_OUTPUT
-#define FAUXCLICKY_DISABLE_OUTPUT TCCR3A &= ~(_BV(COM3A1) | _BV(COM3A0))
+#    define FAUXCLICKY_DISABLE_OUTPUT TCCR3A &= ~(_BV(COM3A1) | _BV(COM3A0))
 #endif
 
 #ifndef FAUXCLICKY_TIMER_PERIOD
-#define FAUXCLICKY_TIMER_PERIOD ICR3
+#    define FAUXCLICKY_TIMER_PERIOD ICR3
 #endif
 
 #ifndef FAUXCLICKY_DUTY_CYCLE
-#define FAUXCLICKY_DUTY_CYCLE OCR3A
+#    define FAUXCLICKY_DUTY_CYCLE OCR3A
 #endif
 
 //
@@ -96,4 +95,3 @@ void fauxclicky_init(void);
 void fauxclicky_stop(void);
 void fauxclicky_play(float note[2]);
 void fauxclicky_check(void);
-

quantum/keycode_config.c

@@ -19,7 +19,6 @@
 extern keymap_config_t keymap_config;
 
 uint16_t keycode_config(uint16_t keycode) {
-
     switch (keycode) {
         case KC_CAPSLOCK:
         case KC_LOCKING_CAPS:

quantum/keycode_config.h

@@ -19,23 +19,23 @@
 #include "action_code.h"
 
 #ifndef KEYCODE_CONFIG_H
-#define KEYCODE_CONFIG_H
+#    define KEYCODE_CONFIG_H
 
 uint16_t keycode_config(uint16_t keycode);
-uint8_t mod_config(uint8_t mod);
+uint8_t  mod_config(uint8_t mod);
 
 /* NOTE: Not portable. Bit field order depends on implementation */
 typedef union {
     uint16_t raw;
     struct {
-        bool swap_control_capslock:1;
-        bool capslock_to_control:1;
-        bool swap_lalt_lgui:1;
-        bool swap_ralt_rgui:1;
-        bool no_gui:1;
-        bool swap_grave_esc:1;
-        bool swap_backslash_backspace:1;
-        bool nkro:1;
+        bool swap_control_capslock : 1;
+        bool capslock_to_control : 1;
+        bool swap_lalt_lgui : 1;
+        bool swap_ralt_rgui : 1;
+        bool no_gui : 1;
+        bool swap_grave_esc : 1;
+        bool swap_backslash_backspace : 1;
+        bool nkro : 1;
     };
 } keymap_config_t;
 

quantum/keymap.h

@@ -22,10 +22,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <stdbool.h>
 #include "action.h"
 #if defined(__AVR__)
-#include <avr/pgmspace.h>
+#    include <avr/pgmspace.h>
 #elif defined PROTOCOL_CHIBIOS
-//We need to ensure that chibios is include before redefining reset
-#include "ch.h"
+// We need to ensure that chibios is include before redefining reset
+#    include "ch.h"
 #endif
 #include "keycode.h"
 #include "action_macro.h"
@@ -38,7 +38,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // ChibiOS uses RESET in its FlagStatus enumeration
 // Therefore define it as QK_RESET here, to avoid name collision
 #if defined(PROTOCOL_CHIBIOS)
-#define RESET QK_RESET
+#    define RESET QK_RESET
 #endif
 
 #include "quantum_keycodes.h"
@@ -47,10 +47,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key);
 
 // translates function id to action
-uint16_t keymap_function_id_to_action( uint16_t function_id );
+uint16_t keymap_function_id_to_action(uint16_t function_id);
 
 extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
 extern const uint16_t fn_actions[];
 
-
 #endif

quantum/keymap_common.c

@@ -20,8 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "keycode.h"
 #include "action_layer.h"
 #if defined(__AVR__)
-#include <util/delay.h>
-#include <stdio.h>
+#    include <util/delay.h>
+#    include <stdio.h>
 #endif
 #include "action.h"
 #include "action_macro.h"
@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 #ifdef MIDI_ENABLE
-	#include "process_midi.h"
+#    include "process_midi.h"
 #endif
 
 extern keymap_config_t keymap_config;
@@ -38,8 +38,7 @@ extern keymap_config_t keymap_config;
 #include <inttypes.h>
 
 /* converts key to action */
-action_t action_for_key(uint8_t layer, keypos_t key)
-{
+action_t action_for_key(uint8_t layer, keypos_t key) {
     // 16bit keycodes - important
     uint16_t keycode = keymap_key_to_keycode(layer, key);
 
@@ -47,7 +46,7 @@ action_t action_for_key(uint8_t layer, keypos_t key)
     keycode = keycode_config(keycode);
 
     action_t action;
-    uint8_t action_layer, when, mod;
+    uint8_t  action_layer, when, mod;
 
     switch (keycode) {
         case KC_FN0 ... KC_FN31:
@@ -69,18 +68,18 @@ action_t action_for_key(uint8_t layer, keypos_t key)
         case KC_TRNS:
             action.code = ACTION_TRANSPARENT;
             break;
-        case QK_MODS ... QK_MODS_MAX: ;
+        case QK_MODS ... QK_MODS_MAX:;
             // Has a modifier
             // Split it up
-            action.code = ACTION_MODS_KEY(keycode >> 8, keycode & 0xFF); // adds modifier to key
+            action.code = ACTION_MODS_KEY(keycode >> 8, keycode & 0xFF);  // adds modifier to key
             break;
-        case QK_FUNCTION ... QK_FUNCTION_MAX: ;
+        case QK_FUNCTION ... QK_FUNCTION_MAX:;
             // Is a shortcut for function action_layer, pull last 12bits
             // This means we have 4,096 FN macros at our disposal
-            action.code = keymap_function_id_to_action( (int)keycode & 0xFFF );
+            action.code = keymap_function_id_to_action((int)keycode & 0xFFF);
             break;
         case QK_MACRO ... QK_MACRO_MAX:
-            if (keycode & 0x800) // tap macros have upper bit set
+            if (keycode & 0x800)  // tap macros have upper bit set
                 action.code = ACTION_MACRO_TAP(keycode & 0xFF);
             else
                 action.code = ACTION_MACRO(keycode & 0xFF);
@@ -88,50 +87,50 @@ action_t action_for_key(uint8_t layer, keypos_t key)
         case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
             action.code = ACTION_LAYER_TAP_KEY((keycode >> 0x8) & 0xF, keycode & 0xFF);
             break;
-        case QK_TO ... QK_TO_MAX: ;
+        case QK_TO ... QK_TO_MAX:;
             // Layer set "GOTO"
-            when = (keycode >> 0x4) & 0x3;
+            when         = (keycode >> 0x4) & 0x3;
             action_layer = keycode & 0xF;
-            action.code = ACTION_LAYER_SET(action_layer, when);
+            action.code  = ACTION_LAYER_SET(action_layer, when);
             break;
-        case QK_MOMENTARY ... QK_MOMENTARY_MAX: ;
+        case QK_MOMENTARY ... QK_MOMENTARY_MAX:;
             // Momentary action_layer
             action_layer = keycode & 0xFF;
-            action.code = ACTION_LAYER_MOMENTARY(action_layer);
+            action.code  = ACTION_LAYER_MOMENTARY(action_layer);
             break;
-        case QK_DEF_LAYER ... QK_DEF_LAYER_MAX: ;
+        case QK_DEF_LAYER ... QK_DEF_LAYER_MAX:;
             // Set default action_layer
             action_layer = keycode & 0xFF;
-            action.code = ACTION_DEFAULT_LAYER_SET(action_layer);
+            action.code  = ACTION_DEFAULT_LAYER_SET(action_layer);
             break;
-        case QK_TOGGLE_LAYER ... QK_TOGGLE_LAYER_MAX: ;
+        case QK_TOGGLE_LAYER ... QK_TOGGLE_LAYER_MAX:;
             // Set toggle
             action_layer = keycode & 0xFF;
-            action.code = ACTION_LAYER_TOGGLE(action_layer);
+            action.code  = ACTION_LAYER_TOGGLE(action_layer);
             break;
-        case QK_ONE_SHOT_LAYER ... QK_ONE_SHOT_LAYER_MAX: ;
+        case QK_ONE_SHOT_LAYER ... QK_ONE_SHOT_LAYER_MAX:;
             // OSL(action_layer) - One-shot action_layer
             action_layer = keycode & 0xFF;
-            action.code = ACTION_LAYER_ONESHOT(action_layer);
+            action.code  = ACTION_LAYER_ONESHOT(action_layer);
             break;
-        case QK_ONE_SHOT_MOD ... QK_ONE_SHOT_MOD_MAX: ;
+        case QK_ONE_SHOT_MOD ... QK_ONE_SHOT_MOD_MAX:;
             // OSM(mod) - One-shot mod
-            mod = mod_config(keycode & 0xFF);
+            mod         = mod_config(keycode & 0xFF);
             action.code = ACTION_MODS_ONESHOT(mod);
             break;
         case QK_LAYER_TAP_TOGGLE ... QK_LAYER_TAP_TOGGLE_MAX:
             action.code = ACTION_LAYER_TAP_TOGGLE(keycode & 0xFF);
             break;
         case QK_LAYER_MOD ... QK_LAYER_MOD_MAX:
-            mod = mod_config(keycode & 0xF);
+            mod          = mod_config(keycode & 0xF);
             action_layer = (keycode >> 4) & 0xF;
-            action.code = ACTION_LAYER_MODS(action_layer, mod);
+            action.code  = ACTION_LAYER_MODS(action_layer, mod);
             break;
         case QK_MOD_TAP ... QK_MOD_TAP_MAX:
-            mod = mod_config((keycode >> 0x8) & 0x1F);
+            mod         = mod_config((keycode >> 0x8) & 0x1F);
             action.code = ACTION_MODS_TAP_KEY(mod, keycode & 0xFF);
             break;
-    #ifdef BACKLIGHT_ENABLE
+#ifdef BACKLIGHT_ENABLE
         case BL_ON:
             action.code = ACTION_BACKLIGHT_ON();
             break;
@@ -150,12 +149,12 @@ action_t action_for_key(uint8_t layer, keypos_t key)
         case BL_STEP:
             action.code = ACTION_BACKLIGHT_STEP();
             break;
-    #endif
-    #ifdef SWAP_HANDS_ENABLE
+#endif
+#ifdef SWAP_HANDS_ENABLE
         case QK_SWAP_HANDS ... QK_SWAP_HANDS_MAX:
             action.code = ACTION(ACT_SWAP_HANDS, keycode & 0xff);
             break;
-    #endif
+#endif
 
         default:
             action.code = ACTION_NO;
@@ -164,42 +163,30 @@ action_t action_for_key(uint8_t layer, keypos_t key)
     return action;
 }
 
-__attribute__ ((weak))
-const uint16_t PROGMEM fn_actions[] = {
+__attribute__((weak)) const uint16_t PROGMEM fn_actions[] = {
 
 };
 
 /* Macro */
-__attribute__ ((weak))
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    return MACRO_NONE;
-}
+__attribute__((weak)) const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { return MACRO_NONE; }
 
 /* Function */
-__attribute__ ((weak))
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-}
+__attribute__((weak)) void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {}
 
 // translates key to keycode
-__attribute__ ((weak))
-uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
+__attribute__((weak)) uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key) {
     // Read entire word (16bits)
     return pgm_read_word(&keymaps[(layer)][(key.row)][(key.col)]);
 }
 
 // translates function id to action
-__attribute__ ((weak))
-uint16_t keymap_function_id_to_action( uint16_t function_id )
-{
-    // The compiler sees the empty (weak) fn_actions and generates a warning
-    // This function should not be called in that case, so the warning is too strict
-    // If this function is called however, the keymap should have overridden fn_actions, and then the compile
-    // is comparing against the wrong array
-    #pragma GCC diagnostic push
-    #pragma GCC diagnostic ignored "-Warray-bounds"
-	return pgm_read_word(&fn_actions[function_id]);
-    #pragma GCC diagnostic pop
+__attribute__((weak)) uint16_t keymap_function_id_to_action(uint16_t function_id) {
+// The compiler sees the empty (weak) fn_actions and generates a warning
+// This function should not be called in that case, so the warning is too strict
+// If this function is called however, the keymap should have overridden fn_actions, and then the compile
+// is comparing against the wrong array
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Warray-bounds"
+    return pgm_read_word(&fn_actions[function_id]);
+#pragma GCC diagnostic pop
 }

quantum/keymap_extras/keymap_belgian.h

@@ -20,86 +20,86 @@
 
 // Normal characters
 // Line 1
-#define BE_SUP2	KC_GRV
-#define BE_AMP	KC_1
-#define BE_EACU	KC_2
-#define BE_QUOT	KC_3
-#define BE_APOS	KC_4
-#define BE_LPRN	KC_5
-#define BE_PARA	KC_6
-#define BE_EGRV	KC_7
-#define BE_EXLM	KC_8
-#define BE_CCED	KC_9
-#define BE_AGRV	KC_0
-#define BE_RPRN	KC_MINS
-#define BE_MINS	KC_EQL
+#define BE_SUP2 KC_GRV
+#define BE_AMP KC_1
+#define BE_EACU KC_2
+#define BE_QUOT KC_3
+#define BE_APOS KC_4
+#define BE_LPRN KC_5
+#define BE_PARA KC_6
+#define BE_EGRV KC_7
+#define BE_EXLM KC_8
+#define BE_CCED KC_9
+#define BE_AGRV KC_0
+#define BE_RPRN KC_MINS
+#define BE_MINS KC_EQL
 
 // Line 2
-#define BE_A    KC_Q
-#define BE_Z	  KC_W
-#define	BE_CIRC	KC_LBRC
-#define BE_DLR	KC_RBRC
+#define BE_A KC_Q
+#define BE_Z KC_W
+#define BE_CIRC KC_LBRC
+#define BE_DLR KC_RBRC
 
 // Line 3
-#define BE_Q 	  KC_A
-#define BE_M 	  KC_SCLN
-#define BE_UGRV	KC_QUOT
-#define BE_MU 	KC_NUHS
+#define BE_Q KC_A
+#define BE_M KC_SCLN
+#define BE_UGRV KC_QUOT
+#define BE_MU KC_NUHS
 
 // Line 4
-#define BE_LESS	KC_NUBS
-#define BE_W	  KC_Z
-#define BE_COMM	KC_M
-#define BE_SCLN	KC_COMM
-#define BE_COLN	KC_DOT
-#define BE_EQL	KC_SLSH
+#define BE_LESS KC_NUBS
+#define BE_W KC_Z
+#define BE_COMM KC_M
+#define BE_SCLN KC_COMM
+#define BE_COLN KC_DOT
+#define BE_EQL KC_SLSH
 
 // Shifted characters
 // Line 1
 #define BE_SUP3 KC_TILD
-#define BE_1  	LSFT(KC_1)
-#define BE_2 	  LSFT(KC_2)
-#define BE_3 	  LSFT(KC_3)
-#define BE_4 	  LSFT(KC_4)
-#define BE_5 	  LSFT(KC_5)
-#define BE_6 	  LSFT(KC_6)
-#define BE_7 	  LSFT(KC_7)
-#define BE_8 	  LSFT(KC_8)
-#define BE_9 	  LSFT(KC_9)
-#define BE_0 	  LSFT(KC_0)
-#define BE_OVRR	KC_UNDS
+#define BE_1 LSFT(KC_1)
+#define BE_2 LSFT(KC_2)
+#define BE_3 LSFT(KC_3)
+#define BE_4 LSFT(KC_4)
+#define BE_5 LSFT(KC_5)
+#define BE_6 LSFT(KC_6)
+#define BE_7 LSFT(KC_7)
+#define BE_8 LSFT(KC_8)
+#define BE_9 LSFT(KC_9)
+#define BE_0 LSFT(KC_0)
+#define BE_OVRR KC_UNDS
 #define BE_UNDS KC_PLUS
 
 // Line 2
-#define BE_UMLT	LSFT(BE_CIRC)
-#define BE_PND	LSFT(BE_DLR)
+#define BE_UMLT LSFT(BE_CIRC)
+#define BE_PND LSFT(BE_DLR)
 
 // Line 3
-#define	BE_PERC	LSFT(BE_UGRV)
+#define BE_PERC LSFT(BE_UGRV)
 
 // Line 4
-#define BE_GRTR	LSFT(BE_LESS)
-#define BE_QUES	LSFT(BE_COMM)
-#define BE_DOT	LSFT(BE_SCLN)
-#define BE_SLSH	LSFT(BE_COLN)
-#define BE_PLUS	LSFT(BE_EQL)
+#define BE_GRTR LSFT(BE_LESS)
+#define BE_QUES LSFT(BE_COMM)
+#define BE_DOT LSFT(BE_SCLN)
+#define BE_SLSH LSFT(BE_COLN)
+#define BE_PLUS LSFT(BE_EQL)
 
 // Alt Gr-ed characters
 // Line 1
 #define BE_PIPE ALGR(KC_1)
-#define BE_AT	  ALGR(KC_2)
-#define BE_HASH	ALGR(KC_3)
+#define BE_AT ALGR(KC_2)
+#define BE_HASH ALGR(KC_3)
 #define BE_LCBR ALGR(KC_9)
-#define BE_RCBR	ALGR(KC_0)
+#define BE_RCBR ALGR(KC_0)
 
 // Line 2
-#define BE_EURO	ALGR(KC_E)
+#define BE_EURO ALGR(KC_E)
 #define BE_LSBR ALGR(BE_CIRC)
 #define BE_RSBR ALGR(BE_DLR)
 
 // Line 3
 #define BE_ACUT ALGR(BE_UGRV)
-#define BE_GRV	ALGR(BE_MU)
+#define BE_GRV ALGR(BE_MU)
 
 // Line 4
 #define BE_BSLS ALGR(BE_LESS)

quantum/keymap_extras/keymap_bepo.h

@@ -21,297 +21,297 @@
 
 // Normal characters
 // First row (on usual keyboards)
-#define BP_DOLLAR           KC_GRAVE            // $
-#define BP_DLR              BP_DOLLAR
-#define BP_DOUBLE_QUOTE     KC_1                // "
-#define BP_DQOT             BP_DOUBLE_QUOTE
-#define BP_LEFT_GUILLEMET   KC_2                // «
-#define BP_LGIL             BP_LEFT_GUILLEMET
-#define BP_RIGHT_GUILLEMET  KC_3                // »
-#define BP_RGIL             BP_RIGHT_GUILLEMET
-#define BP_LEFT_PAREN       KC_4                // (
-#define BP_LPRN             BP_LEFT_PAREN
-#define BP_RIGHT_PAREN      KC_5                // )
-#define BP_RPRN             BP_RIGHT_PAREN
-#define BP_AT               KC_6                // @
-#define BP_PLUS             KC_7                // +
-#define BP_MINUS            KC_8                // -
-#define BP_MINS             BP_MINUS
-#define BP_SLASH            KC_9                // /
-#define BP_SLSH             BP_SLASH
-#define BP_ASTERISK         KC_0                // *
-#define BP_ASTR             BP_ASTERISK
-#define BP_EQUAL            KC_MINUS            // =
-#define BP_EQL              BP_EQUAL
-#define BP_PERCENT          KC_EQUAL            // %
-#define BP_PERC             BP_PERCENT
+#define BP_DOLLAR KC_GRAVE  // $
+#define BP_DLR BP_DOLLAR
+#define BP_DOUBLE_QUOTE KC_1  // "
+#define BP_DQOT BP_DOUBLE_QUOTE
+#define BP_LEFT_GUILLEMET KC_2  // «
+#define BP_LGIL BP_LEFT_GUILLEMET
+#define BP_RIGHT_GUILLEMET KC_3  // »
+#define BP_RGIL BP_RIGHT_GUILLEMET
+#define BP_LEFT_PAREN KC_4  // (
+#define BP_LPRN BP_LEFT_PAREN
+#define BP_RIGHT_PAREN KC_5  // )
+#define BP_RPRN BP_RIGHT_PAREN
+#define BP_AT KC_6     // @
+#define BP_PLUS KC_7   // +
+#define BP_MINUS KC_8  // -
+#define BP_MINS BP_MINUS
+#define BP_SLASH KC_9  // /
+#define BP_SLSH BP_SLASH
+#define BP_ASTERISK KC_0  // *
+#define BP_ASTR BP_ASTERISK
+#define BP_EQUAL KC_MINUS  // =
+#define BP_EQL BP_EQUAL
+#define BP_PERCENT KC_EQUAL  // %
+#define BP_PERC BP_PERCENT
 
 // Second row
-#define BP_B                KC_Q
-#define BP_E_ACUTE          KC_W        // é
-#define BP_ECUT             BP_E_ACUTE
-#define BP_P                KC_E
-#define BP_O                KC_R
-#define BP_E_GRAVE          KC_T        // è
-#define BP_EGRV             BP_E_GRAVE
-#define BP_DEAD_CIRCUMFLEX  KC_Y        // dead ^
-#define BP_DCRC             BP_DEAD_CIRCUMFLEX
-#define BP_V                KC_U
-#define BP_D                KC_I
-#define BP_L                KC_O
-#define BP_J                KC_P
-#define BP_Z                KC_LBRACKET
-#define BP_W                KC_RBRACKET
+#define BP_B KC_Q
+#define BP_E_ACUTE KC_W  // é
+#define BP_ECUT BP_E_ACUTE
+#define BP_P KC_E
+#define BP_O KC_R
+#define BP_E_GRAVE KC_T  // è
+#define BP_EGRV BP_E_GRAVE
+#define BP_DEAD_CIRCUMFLEX KC_Y  // dead ^
+#define BP_DCRC BP_DEAD_CIRCUMFLEX
+#define BP_V KC_U
+#define BP_D KC_I
+#define BP_L KC_O
+#define BP_J KC_P
+#define BP_Z KC_LBRACKET
+#define BP_W KC_RBRACKET
 
 // Third row
-#define BP_A            KC_A
-#define BP_U            KC_S
-#define BP_I            KC_D
-#define BP_E            KC_F
-#define BP_COMMA        KC_G        // ,
-#define BP_COMM         BP_COMMA
-#define BP_C            KC_H
-#define BP_T            KC_J
-#define BP_S            KC_K
-#define BP_R            KC_L
-#define BP_N            KC_SCOLON
-#define BP_M            KC_QUOTE
-#define BP_C_CEDILLA    KC_BSLASH   // ç
-#define BP_CCED         BP_C_CEDILLA
+#define BP_A KC_A
+#define BP_U KC_S
+#define BP_I KC_D
+#define BP_E KC_F
+#define BP_COMMA KC_G  // ,
+#define BP_COMM BP_COMMA
+#define BP_C KC_H
+#define BP_T KC_J
+#define BP_S KC_K
+#define BP_R KC_L
+#define BP_N KC_SCOLON
+#define BP_M KC_QUOTE
+#define BP_C_CEDILLA KC_BSLASH  // ç
+#define BP_CCED BP_C_CEDILLA
 
 // Fourth row
-#define BP_E_CIRCUMFLEX     KC_NONUS_BSLASH // ê
-#define BP_ECRC             BP_E_CIRCUMFLEX
-#define BP_A_GRAVE          KC_Z            // à
-#define BP_AGRV             BP_A_GRAVE
-#define BP_Y                KC_X
-#define BP_X                KC_C
-#define BP_DOT              KC_V            // .
-#define BP_K                KC_B
-#define BP_APOSTROPHE       KC_N
-#define BP_APOS             BP_APOSTROPHE   // '
-#define BP_Q                KC_M
-#define BP_G                KC_COMMA
-#define BP_H                KC_DOT
-#define BP_F                KC_SLASH
+#define BP_E_CIRCUMFLEX KC_NONUS_BSLASH  // ê
+#define BP_ECRC BP_E_CIRCUMFLEX
+#define BP_A_GRAVE KC_Z  // à
+#define BP_AGRV BP_A_GRAVE
+#define BP_Y KC_X
+#define BP_X KC_C
+#define BP_DOT KC_V  // .
+#define BP_K KC_B
+#define BP_APOSTROPHE KC_N
+#define BP_APOS BP_APOSTROPHE  // '
+#define BP_Q KC_M
+#define BP_G KC_COMMA
+#define BP_H KC_DOT
+#define BP_F KC_SLASH
 
 // Shifted characters
 // First row
-#define BP_HASH     LSFT(BP_DOLLAR)     // #
-#define BP_1        LSFT(KC_1)
-#define BP_2        LSFT(KC_2)
-#define BP_3        LSFT(KC_3)
-#define BP_4        LSFT(KC_4)
-#define BP_5        LSFT(KC_5)
-#define BP_6        LSFT(KC_6)
-#define BP_7        LSFT(KC_7)
-#define BP_8        LSFT(KC_8)
-#define BP_9        LSFT(KC_9)
-#define BP_0        LSFT(KC_0)
-#define BP_DEGREE   LSFT(BP_EQUAL)      // °
-#define BP_DEGR     BP_DEGREE
-#define BP_GRAVE    LSFT(BP_PERCENT)    // `
-#define BP_GRV      BP_GRAVE
+#define BP_HASH LSFT(BP_DOLLAR)  // #
+#define BP_1 LSFT(KC_1)
+#define BP_2 LSFT(KC_2)
+#define BP_3 LSFT(KC_3)
+#define BP_4 LSFT(KC_4)
+#define BP_5 LSFT(KC_5)
+#define BP_6 LSFT(KC_6)
+#define BP_7 LSFT(KC_7)
+#define BP_8 LSFT(KC_8)
+#define BP_9 LSFT(KC_9)
+#define BP_0 LSFT(KC_0)
+#define BP_DEGREE LSFT(BP_EQUAL)  // °
+#define BP_DEGR BP_DEGREE
+#define BP_GRAVE LSFT(BP_PERCENT)  // `
+#define BP_GRV BP_GRAVE
 
 // Second row
-#define BP_EXCLAIM  LSFT(BP_DEAD_CIRCUMFLEX)    // !
-#define BP_EXLM     BP_EXCLAIM
+#define BP_EXCLAIM LSFT(BP_DEAD_CIRCUMFLEX)  // !
+#define BP_EXLM BP_EXCLAIM
 
 // Third row
-#define BP_SCOLON   LSFT(BP_COMMA)  // ;
-#define BP_SCLN     BP_SCOLON
+#define BP_SCOLON LSFT(BP_COMMA)  // ;
+#define BP_SCLN BP_SCOLON
 
 // Fourth row
-#define BP_COLON    LSFT(BP_DOT)    // :
-#define BP_COLN     BP_COLON
+#define BP_COLON LSFT(BP_DOT)  // :
+#define BP_COLN BP_COLON
 #define BP_QUESTION LSFT(BP_APOS)  // ?
-#define BP_QEST     BP_QUESTION
+#define BP_QEST BP_QUESTION
 
 // Space bar
-#define BP_NON_BREAKING_SPACE   LSFT(KC_SPACE)
-#define BP_NBSP                 BP_NON_BREAKING_SPACE
+#define BP_NON_BREAKING_SPACE LSFT(KC_SPACE)
+#define BP_NBSP BP_NON_BREAKING_SPACE
 
 // AltGr-ed characters
 // First row
-#define BP_EN_DASH          ALGR(BP_DOLLAR)     // –
-#define BP_NDSH             BP_EN_DASH
-#define BP_EM_DASH          ALGR(KC_1)          // —
-#define BP_MDSH             BP_EM_DASH
-#define BP_LESS             ALGR(KC_2)          // <
-#define BP_GREATER          ALGR(KC_3)          // >
-#define BP_GRTR             BP_GREATER
-#define BP_LBRACKET         ALGR(KC_4)          // [
-#define BP_LBRC             BP_LBRACKET
-#define BP_RBRACKET         ALGR(KC_5)          // ]
-#define BP_RBRC             BP_RBRACKET
-#define BP_CIRCUMFLEX       ALGR(KC_6)          // ^
-#define BP_CIRC             BP_CIRCUMFLEX
-#define BP_PLUS_MINUS       ALGR(KC_7)          // ±
-#define BP_PSMS             BP_PLUS_MINUS
-#define BP_MATH_MINUS       ALGR(KC_8)          // −
-#define BP_MMNS             BP_MATH_MINUS
-#define BP_OBELUS           ALGR(KC_9)          // ÷
-#define BP_OBEL             BP_OBELUS
+#define BP_EN_DASH ALGR(BP_DOLLAR)  // –
+#define BP_NDSH BP_EN_DASH
+#define BP_EM_DASH ALGR(KC_1)  // —
+#define BP_MDSH BP_EM_DASH
+#define BP_LESS ALGR(KC_2)     // <
+#define BP_GREATER ALGR(KC_3)  // >
+#define BP_GRTR BP_GREATER
+#define BP_LBRACKET ALGR(KC_4)  // [
+#define BP_LBRC BP_LBRACKET
+#define BP_RBRACKET ALGR(KC_5)  // ]
+#define BP_RBRC BP_RBRACKET
+#define BP_CIRCUMFLEX ALGR(KC_6)  // ^
+#define BP_CIRC BP_CIRCUMFLEX
+#define BP_PLUS_MINUS ALGR(KC_7)  // ±
+#define BP_PSMS BP_PLUS_MINUS
+#define BP_MATH_MINUS ALGR(KC_8)  // −
+#define BP_MMNS BP_MATH_MINUS
+#define BP_OBELUS ALGR(KC_9)  // ÷
+#define BP_OBEL BP_OBELUS
 // more conventional name of the symbol
-#define BP_DIVISION_SIGN    BP_OBELUS
-#define BP_DVSN             BP_DIVISION_SIGN
-#define BP_TIMES            ALGR(KC_0)          // ×
-#define BP_TIMS             BP_TIMES
-#define BP_DIFFERENT        ALGR(BP_EQUAL)      // ≠
-#define BP_DIFF             BP_DIFFERENT
-#define BP_PERMILLE         ALGR(BP_PERCENT)    // ‰
-#define BP_PMIL             BP_PERMILLE
+#define BP_DIVISION_SIGN BP_OBELUS
+#define BP_DVSN BP_DIVISION_SIGN
+#define BP_TIMES ALGR(KC_0)  // ×
+#define BP_TIMS BP_TIMES
+#define BP_DIFFERENT ALGR(BP_EQUAL)  // ≠
+#define BP_DIFF BP_DIFFERENT
+#define BP_PERMILLE ALGR(BP_PERCENT)  // ‰
+#define BP_PMIL BP_PERMILLE
 
 // Second row
-#define BP_PIPE                 ALGR(BP_B)          // |
-#define BP_DEAD_ACUTE           ALGR(BP_E_ACUTE)    // dead ´
-#define BP_DACT                 BP_DEAD_ACUTE
-#define BP_AMPERSAND            ALGR(BP_P)          // &
-#define BP_AMPR                 BP_AMPERSAND
-#define BP_OE_LIGATURE          ALGR(BP_O)          // œ
-#define BP_OE                   BP_OE_LIGATURE
-#define BP_DEAD_GRAVE           ALGR(BP_E_GRAVE)    // `
-#define BP_DGRV                 BP_DEAD_GRAVE
-#define BP_INVERTED_EXCLAIM     ALGR(BP_DEAD_CIRCUMFLEX)    // ¡
-#define BP_IXLM                 BP_INVERTED_EXCLAIM
-#define BP_DEAD_CARON           ALGR(BP_V)          // dead ˇ
-#define BP_DCAR                 BP_DEAD_CARON
-#define BP_ETH                  ALGR(BP_D)          // ð
-#define BP_DEAD_SLASH           ALGR(BP_L)          // dead /
-#define BP_DSLH                 BP_DEAD_SLASH
-#define BP_IJ_LIGATURE          ALGR(BP_J)          // ij
-#define BP_IJ                   BP_IJ_LIGATURE
-#define BP_SCHWA                ALGR(BP_Z)          // ə
-#define BP_SCWA                 BP_SCHWA
-#define BP_DEAD_BREVE           ALGR(BP_W)          // dead ˘
-#define BP_DBRV                 BP_DEAD_BREVE
+#define BP_PIPE ALGR(BP_B)              // |
+#define BP_DEAD_ACUTE ALGR(BP_E_ACUTE)  // dead ´
+#define BP_DACT BP_DEAD_ACUTE
+#define BP_AMPERSAND ALGR(BP_P)  // &
+#define BP_AMPR BP_AMPERSAND
+#define BP_OE_LIGATURE ALGR(BP_O)  // œ
+#define BP_OE BP_OE_LIGATURE
+#define BP_DEAD_GRAVE ALGR(BP_E_GRAVE)  // `
+#define BP_DGRV BP_DEAD_GRAVE
+#define BP_INVERTED_EXCLAIM ALGR(BP_DEAD_CIRCUMFLEX)  // ¡
+#define BP_IXLM BP_INVERTED_EXCLAIM
+#define BP_DEAD_CARON ALGR(BP_V)  // dead ˇ
+#define BP_DCAR BP_DEAD_CARON
+#define BP_ETH ALGR(BP_D)         // ð
+#define BP_DEAD_SLASH ALGR(BP_L)  // dead /
+#define BP_DSLH BP_DEAD_SLASH
+#define BP_IJ_LIGATURE ALGR(BP_J)  // ij
+#define BP_IJ BP_IJ_LIGATURE
+#define BP_SCHWA ALGR(BP_Z)  // ə
+#define BP_SCWA BP_SCHWA
+#define BP_DEAD_BREVE ALGR(BP_W)  // dead ˘
+#define BP_DBRV BP_DEAD_BREVE
 
 // Third row
-#define BP_AE_LIGATURE              ALGR(BP_A)          // æ
-#define BP_AE                       BP_AE_LIGATURE
-#define BP_U_GRAVE                  ALGR(BP_U)          // ù
-#define BP_UGRV                     BP_U_GRAVE
-#define BP_DEAD_TREMA               ALGR(BP_I)          // dead ¨ (trema/umlaut/diaresis)
-#define BP_DTRM                     BP_DEAD_TREMA
-#define BP_EURO                     ALGR(BP_E)          // €
-#define BP_TYPOGRAPHICAL_APOSTROPHE ALGR(BP_COMMA)      // ’
-#define BP_TAPO                     BP_TYPOGRAPHICAL_APOSTROPHE
-#define BP_COPYRIGHT                ALGR(BP_C)          // ©
-#define BP_CPRT                     BP_COPYRIGHT
-#define BP_THORN                    ALGR(BP_T)          // þ
-#define BP_THRN                     BP_THORN
-#define BP_SHARP_S                  ALGR(BP_S)          // ß
-#define BP_SRPS                     BP_SHARP_S
-#define BP_REGISTERED_TRADEMARK     ALGR(BP_R)          // ®
-#define BP_RTM                      BP_REGISTERED_TRADEMARK
-#define BP_DEAD_TILDE               ALGR(BP_N)          // dead ~
-#define BP_DTLD                     BP_DEAD_TILDE
-#define BP_DEAD_MACRON              ALGR(BP_M)          // dead ¯
-#define BP_DMCR                     BP_DEAD_MACRON
-#define BP_DEAD_CEDILLA             ALGR(BP_C_CEDILLA)  // dead ¸
-#define BP_DCED                     BP_DEAD_CEDILLA
+#define BP_AE_LIGATURE ALGR(BP_A)  // æ
+#define BP_AE BP_AE_LIGATURE
+#define BP_U_GRAVE ALGR(BP_U)  // ù
+#define BP_UGRV BP_U_GRAVE
+#define BP_DEAD_TREMA ALGR(BP_I)  // dead ¨ (trema/umlaut/diaresis)
+#define BP_DTRM BP_DEAD_TREMA
+#define BP_EURO ALGR(BP_E)                          // €
+#define BP_TYPOGRAPHICAL_APOSTROPHE ALGR(BP_COMMA)  // ’
+#define BP_TAPO BP_TYPOGRAPHICAL_APOSTROPHE
+#define BP_COPYRIGHT ALGR(BP_C)  // ©
+#define BP_CPRT BP_COPYRIGHT
+#define BP_THORN ALGR(BP_T)  // þ
+#define BP_THRN BP_THORN
+#define BP_SHARP_S ALGR(BP_S)  // ß
+#define BP_SRPS BP_SHARP_S
+#define BP_REGISTERED_TRADEMARK ALGR(BP_R)  // ®
+#define BP_RTM BP_REGISTERED_TRADEMARK
+#define BP_DEAD_TILDE ALGR(BP_N)  // dead ~
+#define BP_DTLD BP_DEAD_TILDE
+#define BP_DEAD_MACRON ALGR(BP_M)  // dead ¯
+#define BP_DMCR BP_DEAD_MACRON
+#define BP_DEAD_CEDILLA ALGR(BP_C_CEDILLA)  // dead ¸
+#define BP_DCED BP_DEAD_CEDILLA
 
 // Fourth row
-#define BP_NONUS_SLASH          ALGR(BP_E_CIRCUMFLEX)   // / on non-us backslash key (102nd key, ê in bépo)
-#define BP_NUSL                 BP_NONUS_SLASH
-#define BP_BACKSLASH            ALGR(BP_A_GRAVE)        /* \ */
-#define BP_BSLS                 BP_BACKSLASH
-#define BP_LEFT_CURLY_BRACE     ALGR(BP_Y)              // {
-#define BP_LCBR                 BP_LEFT_CURLY_BRACE
-#define BP_RIGHT_CURLY_BRACE    ALGR(BP_X)              // }
-#define BP_RCBR                 BP_RIGHT_CURLY_BRACE
-#define BP_ELLIPSIS             ALGR(BP_DOT)            // …
-#define BP_ELPS                 BP_ELLIPSIS
-#define BP_TILDE                ALGR(BP_K)              // ~
-#define BP_TILD                 BP_TILDE
-#define BP_INVERTED_QUESTION    ALGR(BP_QUESTION)       // ¿
-#define BP_IQST                 BP_INVERTED_QUESTION
-#define BP_DEAD_RING            ALGR(BP_Q)              // dead °
-#define BP_DRNG                 BP_DEAD_RING
-#define BP_DEAD_GREEK           ALGR(BP_G)              // dead Greek key (following key will make a Greek letter)
-#define BP_DGRK                 BP_DEAD_GREEK
-#define BP_DAGGER               ALGR(BP_H)              // †
-#define BP_DAGR                 BP_DAGGER
-#define BP_DEAD_OGONEK          ALGR(BP_F)              // dead ˛
-#define BP_DOGO                 BP_DEAD_OGONEK
+#define BP_NONUS_SLASH ALGR(BP_E_CIRCUMFLEX)  // / on non-us backslash key (102nd key, ê in bépo)
+#define BP_NUSL BP_NONUS_SLASH
+#define BP_BACKSLASH ALGR(BP_A_GRAVE) /* \ */
+#define BP_BSLS BP_BACKSLASH
+#define BP_LEFT_CURLY_BRACE ALGR(BP_Y)  // {
+#define BP_LCBR BP_LEFT_CURLY_BRACE
+#define BP_RIGHT_CURLY_BRACE ALGR(BP_X)  // }
+#define BP_RCBR BP_RIGHT_CURLY_BRACE
+#define BP_ELLIPSIS ALGR(BP_DOT)  // …
+#define BP_ELPS BP_ELLIPSIS
+#define BP_TILDE ALGR(BP_K)  // ~
+#define BP_TILD BP_TILDE
+#define BP_INVERTED_QUESTION ALGR(BP_QUESTION)  // ¿
+#define BP_IQST BP_INVERTED_QUESTION
+#define BP_DEAD_RING ALGR(BP_Q)  // dead °
+#define BP_DRNG BP_DEAD_RING
+#define BP_DEAD_GREEK ALGR(BP_G)  // dead Greek key (following key will make a Greek letter)
+#define BP_DGRK BP_DEAD_GREEK
+#define BP_DAGGER ALGR(BP_H)  // †
+#define BP_DAGR BP_DAGGER
+#define BP_DEAD_OGONEK ALGR(BP_F)  // dead ˛
+#define BP_DOGO BP_DEAD_OGONEK
 
 // Space bar
-#define BP_UNDERSCORE   ALGR(KC_SPACE)      // _
-#define BP_UNDS         BP_UNDERSCORE
+#define BP_UNDERSCORE ALGR(KC_SPACE)  // _
+#define BP_UNDS BP_UNDERSCORE
 
 // AltGr-Shifted characters (different from capitalised AltGr-ed characters)
 // First row
-#define BP_PARAGRAPH            ALGR(BP_HASH)       // ¶
-#define BP_PARG                 BP_PARAGRAPH
-#define BP_LOW_DOUBLE_QUOTE     ALGR(BP_1)          // „
-#define BP_LWQT                 BP_LOW_DOUBLE_QUOTE
-#define BP_LEFT_DOUBLE_QUOTE    ALGR(BP_2)          // “
-#define BP_LDQT                 BP_LEFT_DOUBLE_QUOTE
-#define BP_RIGHT_DOUBLE_QUOTE   ALGR(BP_3)          // ”
-#define BP_RDQT                 BP_RIGHT_DOUBLE_QUOTE
-#define BP_LESS_OR_EQUAL        ALGR(BP_4)          // ≤
-#define BP_LEQL                 BP_LESS_OR_EQUAL
-#define BP_GREATER_OR_EQUAL     ALGR(BP_5)          // ≥
-#define BP_GEQL                 BP_GREATER_OR_EQUAL
+#define BP_PARAGRAPH ALGR(BP_HASH)  // ¶
+#define BP_PARG BP_PARAGRAPH
+#define BP_LOW_DOUBLE_QUOTE ALGR(BP_1)  // „
+#define BP_LWQT BP_LOW_DOUBLE_QUOTE
+#define BP_LEFT_DOUBLE_QUOTE ALGR(BP_2)  // “
+#define BP_LDQT BP_LEFT_DOUBLE_QUOTE
+#define BP_RIGHT_DOUBLE_QUOTE ALGR(BP_3)  // ”
+#define BP_RDQT BP_RIGHT_DOUBLE_QUOTE
+#define BP_LESS_OR_EQUAL ALGR(BP_4)  // ≤
+#define BP_LEQL BP_LESS_OR_EQUAL
+#define BP_GREATER_OR_EQUAL ALGR(BP_5)  // ≥
+#define BP_GEQL BP_GREATER_OR_EQUAL
 // nothing on ALGR(BP_6)
-#define BP_NEGATION             ALGR(BP_7)          // ¬
-#define BP_NEGT                 BP_NEGATION
-#define BP_ONE_QUARTER          ALGR(BP_8)          // ¼
-#define BP_1QRT                 BP_ONE_QUARTER
-#define BP_ONE_HALF             ALGR(BP_9)          // ½
-#define BP_1HLF                 BP_ONE_HALF
-#define BP_THREE_QUARTERS       ALGR(BP_0)          // ¾
-#define BP_3QRT                 BP_THREE_QUARTERS
-#define BP_MINUTES              ALGR(BP_DEGREE)     // ′
-#define BP_MNUT                 BP_MINUTES
-#define BP_SECONDS              ALGR(BP_GRAVE)      // ″
-#define BP_SCND                 BP_SECONDS
+#define BP_NEGATION ALGR(BP_7)  // ¬
+#define BP_NEGT BP_NEGATION
+#define BP_ONE_QUARTER ALGR(BP_8)  // ¼
+#define BP_1QRT BP_ONE_QUARTER
+#define BP_ONE_HALF ALGR(BP_9)  // ½
+#define BP_1HLF BP_ONE_HALF
+#define BP_THREE_QUARTERS ALGR(BP_0)  // ¾
+#define BP_3QRT BP_THREE_QUARTERS
+#define BP_MINUTES ALGR(BP_DEGREE)  // ′
+#define BP_MNUT BP_MINUTES
+#define BP_SECONDS ALGR(BP_GRAVE)  // ″
+#define BP_SCND BP_SECONDS
 
 // Second row
-#define BP_BROKEN_PIPE          LSFT(BP_PIPE)           // ¦
-#define BP_BPIP                 BP_BROKEN_PIPE
-#define BP_DEAD_DOUBLE_ACUTE    LSFT(BP_DEAD_ACUTE)     // ˝
-#define BP_DDCT                 BP_DEAD_DOUBLE_ACUTE
-#define BP_SECTION              ALGR(LSFT(BP_P))        // §
-#define BP_SECT                 BP_SECTION
+#define BP_BROKEN_PIPE LSFT(BP_PIPE)  // ¦
+#define BP_BPIP BP_BROKEN_PIPE
+#define BP_DEAD_DOUBLE_ACUTE LSFT(BP_DEAD_ACUTE)  // ˝
+#define BP_DDCT BP_DEAD_DOUBLE_ACUTE
+#define BP_SECTION ALGR(LSFT(BP_P))  // §
+#define BP_SECT BP_SECTION
 // LSFT(BP_DEAD_GRAVE) is actually the same character as LSFT(BP_PERCENT)
-#define BP_GRAVE_BIS            LSFT(BP_DEAD_GRAVE)     // `
-#define BP_GRVB                 BP_GRAVE_BIS
+#define BP_GRAVE_BIS LSFT(BP_DEAD_GRAVE)  // `
+#define BP_GRVB BP_GRAVE_BIS
 
 // Third row
-#define BP_DEAD_DOT_ABOVE       LSFT(BP_DEAD_TREMA)     // dead ˙
-#define BP_DDTA                 BP_DEAD_DOT_ABOVE
-#define BP_DEAD_CURRENCY        LSFT(BP_EURO)           // dead ¤ (next key will generate a currency code like ¥ or £)
-#define BP_DCUR                 BP_DEAD_CURRENCY
-#define BP_DEAD_HORN            LSFT(ALGR(BP_COMMA))    // dead ̛
-#define BP_DHRN                 BP_DEAD_HORN
-#define BP_LONG_S               LSFT(ALGR(BP_C))        // ſ
-#define BP_LNGS                 BP_LONG_S
-#define BP_TRADEMARK            LSFT(BP_REGISTERED_TRADEMARK)   // ™
-#define BP_TM                   BP_TRADEMARK
-#define BP_ORDINAL_INDICATOR_O  LSFT(ALGR(BP_M))        // º
-#define BP_ORDO                 BP_ORDINAL_INDICATOR_O
-#define BP_DEAD_COMMA           LSFT(BP_DEAD_CEDILLA)   // dead ˛
-#define BP_DCOM                 BP_DEAD_COMMA
+#define BP_DEAD_DOT_ABOVE LSFT(BP_DEAD_TREMA)  // dead ˙
+#define BP_DDTA BP_DEAD_DOT_ABOVE
+#define BP_DEAD_CURRENCY LSFT(BP_EURO)  // dead ¤ (next key will generate a currency code like ¥ or £)
+#define BP_DCUR BP_DEAD_CURRENCY
+#define BP_DEAD_HORN LSFT(ALGR(BP_COMMA))  // dead ̛
+#define BP_DHRN BP_DEAD_HORN
+#define BP_LONG_S LSFT(ALGR(BP_C))  // ſ
+#define BP_LNGS BP_LONG_S
+#define BP_TRADEMARK LSFT(BP_REGISTERED_TRADEMARK)  // ™
+#define BP_TM BP_TRADEMARK
+#define BP_ORDINAL_INDICATOR_O LSFT(ALGR(BP_M))  // º
+#define BP_ORDO BP_ORDINAL_INDICATOR_O
+#define BP_DEAD_COMMA LSFT(BP_DEAD_CEDILLA)  // dead ˛
+#define BP_DCOM BP_DEAD_COMMA
 
 // Fourth row
-#define BP_LEFT_QUOTE           LSFT(ALGR(BP_Y))        // ‘
-#define BP_LQOT                 BP_LEFT_QUOTE
-#define BP_RIGHT_QUOTE          LSFT(ALGR(BP_X))        // ’
-#define BP_RQOT                 BP_RIGHT_QUOTE
-#define BP_INTERPUNCT           LSFT(ALGR(BP_DOT))      // ·
-#define BP_IPCT                 BP_INTERPUNCT
-#define BP_DEAD_HOOK_ABOVE      LSFT(ALGR(BP_QUESTION)) // dead ̉
-#define BP_DHKA                 BP_DEAD_HOOK_ABOVE
-#define BP_DEAD_UNDERDOT        LSFT(BP_DEAD_RING)      // dead ̣
-#define BP_DUDT                 BP_DEAD_UNDERDOT
-#define BP_DOUBLE_DAGGER        LSFT(BP_DAGGER)         // ‡
-#define BP_DDGR                 BP_DOUBLE_DAGGER
-#define BP_ORDINAL_INDICATOR_A  LSFT(ALGR(BP_F))        // ª
-#define BP_ORDA                 BP_ORDINAL_INDICATOR_A
+#define BP_LEFT_QUOTE LSFT(ALGR(BP_Y))  // ‘
+#define BP_LQOT BP_LEFT_QUOTE
+#define BP_RIGHT_QUOTE LSFT(ALGR(BP_X))  // ’
+#define BP_RQOT BP_RIGHT_QUOTE
+#define BP_INTERPUNCT LSFT(ALGR(BP_DOT))  // ·
+#define BP_IPCT BP_INTERPUNCT
+#define BP_DEAD_HOOK_ABOVE LSFT(ALGR(BP_QUESTION))  // dead ̉
+#define BP_DHKA BP_DEAD_HOOK_ABOVE
+#define BP_DEAD_UNDERDOT LSFT(BP_DEAD_RING)  // dead ̣
+#define BP_DUDT BP_DEAD_UNDERDOT
+#define BP_DOUBLE_DAGGER LSFT(BP_DAGGER)  // ‡
+#define BP_DDGR BP_DOUBLE_DAGGER
+#define BP_ORDINAL_INDICATOR_A LSFT(ALGR(BP_F))  // ª
+#define BP_ORDA BP_ORDINAL_INDICATOR_A
 
 // Space bar
-#define BP_NARROW_NON_BREAKING_SPACE    ALGR(BP_NON_BREAKING_SPACE)
-#define BP_NNBS                         BP_NARROW_NON_BREAKING_SPACE
+#define BP_NARROW_NON_BREAKING_SPACE ALGR(BP_NON_BREAKING_SPACE)
+#define BP_NNBS BP_NARROW_NON_BREAKING_SPACE
 
 #endif

quantum/keymap_extras/keymap_br_abnt2.h

@@ -21,54 +21,54 @@
 
 /* Scan codes for the Brazilian ABNT2 keyboard layout */
 
-#define BR_CCDL KC_SCLN      //  Ç   same scancode as ;: on US layout
-#define BR_SCLN KC_SLSH      //  ;:  same scancode as /? on US layout
-#define BR_QUOT KC_GRV       //  '"  same scancode as `~ on US layout
-#define BR_TILD KC_QUOT      //  ~^  dead keys, same scancode as '" on US layout
-#define BR_ACUT KC_LBRC      //  ´`  dead keys, same scancode as [{ on US layout
-#define BR_LBRC KC_RBRC      //  [{  same scancode as ]} on US layout
-#define BR_RBRC KC_BSLS      //  ]}  same scancode as \| on US layout
-#define BR_BSLS KC_NUBS      //  \|  uses the non-US hash scancode (#~, sometimes §±)
-#define BR_SLSH KC_INT1      //  /?  uses the INTL1 scancode
+#define BR_CCDL KC_SCLN  //  Ç   same scancode as ;: on US layout
+#define BR_SCLN KC_SLSH  //  ;:  same scancode as /? on US layout
+#define BR_QUOT KC_GRV   //  '"  same scancode as `~ on US layout
+#define BR_TILD KC_QUOT  //  ~^  dead keys, same scancode as '" on US layout
+#define BR_ACUT KC_LBRC  //  ´`  dead keys, same scancode as [{ on US layout
+#define BR_LBRC KC_RBRC  //  [{  same scancode as ]} on US layout
+#define BR_RBRC KC_BSLS  //  ]}  same scancode as \| on US layout
+#define BR_BSLS KC_NUBS  //  \|  uses the non-US hash scancode (#~, sometimes §±)
+#define BR_SLSH KC_INT1  //  /?  uses the INTL1 scancode
 
-#define BR_COLN LSFT(BR_SCLN)   // shifted :
-#define BR_DQT  LSFT(BR_QUOT)   // shifted "
-#define BR_CIRC LSFT(BR_TILD)   // shifted ^ (dead key)
-#define BR_GRAV LSFT(BR_ACUT)   // shifted ` (dead key)
-#define BR_LCBR LSFT(BR_LBRC)   // shifted {
-#define BR_RCBR LSFT(BR_RBRC)   // shifted }
-#define BR_PIPE LSFT(BR_BSLS)   // shifted |
-#define BR_QUES LSFT(BR_SLSH)   // shifted ?
-#define BR_TRMA LSFT(KC_6)      // shifted ¨ (dead key - trema accent)
+#define BR_COLN LSFT(BR_SCLN)  // shifted :
+#define BR_DQT LSFT(BR_QUOT)   // shifted "
+#define BR_CIRC LSFT(BR_TILD)  // shifted ^ (dead key)
+#define BR_GRAV LSFT(BR_ACUT)  // shifted ` (dead key)
+#define BR_LCBR LSFT(BR_LBRC)  // shifted {
+#define BR_RCBR LSFT(BR_RBRC)  // shifted }
+#define BR_PIPE LSFT(BR_BSLS)  // shifted |
+#define BR_QUES LSFT(BR_SLSH)  // shifted ?
+#define BR_TRMA LSFT(KC_6)     // shifted ¨ (dead key - trema accent)
 
 // On the ABNT2 the keypad comma and the keypad dot scancodes are switched
 // (presumably because in Brazil comma is used as the decimal separator)
 #define BR_KPDT KC_KP_COMMA  //  keypad .
 #define BR_KPCM KC_KP_DOT    //  keypad ,
 
-#define BR_1UP    LALT(KC_1)      // 1 superscript                    ¹   alt+1
-#define BR_2UP    LALT(KC_2)      // 2 superscript                    ²   alt+2
-#define BR_3UP    LALT(KC_3)      // 3 superscript                    ³   alt+3
-#define BR_PND    LALT(KC_4)      // Pound sign                       £   alt+4
-#define BR_CENT   LALT(KC_5)      // Cent sign                        ¢   alt+5
-#define BR_NOT    LALT(KC_6)      // Not sign                         ¬   alt+6
-#define BR_SECT   LALT(KC_EQL)    // Section sign                     §   alt+=
-#define BR_FORD   LALT(BR_LBRC)   // Feminine Ordinal Sign            ª   alt+[
-#define BR_MORD   LALT(BR_RBRC)   // Masculine Ordinal Sign           º   alt+]
-#define BR_DGRE   LALT(BR_SLSH)   // Degree sign                      °   alt+/
+#define BR_1UP LALT(KC_1)      // 1 superscript                    ¹   alt+1
+#define BR_2UP LALT(KC_2)      // 2 superscript                    ²   alt+2
+#define BR_3UP LALT(KC_3)      // 3 superscript                    ³   alt+3
+#define BR_PND LALT(KC_4)      // Pound sign                       £   alt+4
+#define BR_CENT LALT(KC_5)     // Cent sign                        ¢   alt+5
+#define BR_NOT LALT(KC_6)      // Not sign                         ¬   alt+6
+#define BR_SECT LALT(KC_EQL)   // Section sign                     §   alt+=
+#define BR_FORD LALT(BR_LBRC)  // Feminine Ordinal Sign            ª   alt+[
+#define BR_MORD LALT(BR_RBRC)  // Masculine Ordinal Sign           º   alt+]
+#define BR_DGRE LALT(BR_SLSH)  // Degree sign                      °   alt+/
 
-#define BR_EURO   LALT(KC_E)      // Euro sign                        €   alt+e
-#define BR_NDTD   LALT(BR_TILD)   // Non-dead key tilde               ~   alt+~
-#define BR_NDAC   LALT(BR_ACUT)   // Non-dead key acute accent        ´   alt+´
-#define BR_NDGV   LALT(BR_QUOT)   // Non-dead key grave accent        `   alt+'
-#define BR_NDCR   LALT(BR_CIRC)   // Non-dead key circumflex accent   ^   alt+^ (alt+shift+~)
-#define BR_NDTR   LALT(BR_TRMA)   // Non-dead key trema accent        ¨   alt+¨ (alt+shift+6)
+#define BR_EURO LALT(KC_E)     // Euro sign                        €   alt+e
+#define BR_NDTD LALT(BR_TILD)  // Non-dead key tilde               ~   alt+~
+#define BR_NDAC LALT(BR_ACUT)  // Non-dead key acute accent        ´   alt+´
+#define BR_NDGV LALT(BR_QUOT)  // Non-dead key grave accent        `   alt+'
+#define BR_NDCR LALT(BR_CIRC)  // Non-dead key circumflex accent   ^   alt+^ (alt+shift+~)
+#define BR_NDTR LALT(BR_TRMA)  // Non-dead key trema accent        ¨   alt+¨ (alt+shift+6)
 
 // For 101-key keyboard layouts, the ABNT2 layout allows
 // the slash and question mark to be typed using alt+q and alt+w.
 // The shortcuts are provided here for completeness' sake,
 // but it's recommended to use BR_SLSH and BR_QUES instead
-#define BR_ASLS   LALT(KC_Q)
-#define BR_AQST   LALT(KC_W)
+#define BR_ASLS LALT(KC_Q)
+#define BR_AQST LALT(KC_W)
 
 #endif

quantum/keymap_extras/keymap_canadian_multilingual.h

@@ -19,241 +19,241 @@
 #include "keymap.h"
 
 #ifndef GR2A
-#define GR2A(kc)    RCTL(kc)
+#    define GR2A(kc) RCTL(kc)
 #endif
 
 // Normal characters
 // First row
-#define CSA_SLASH   KC_GRV      // /
-#define CSA_SLSH    CSA_SLASH
+#define CSA_SLASH KC_GRV  // /
+#define CSA_SLSH CSA_SLASH
 
 // Second row
-#define CSA_DEAD_CIRCUMFLEX     KC_LBRACKET         // dead ^
-#define CSA_DCRC                CSA_DEAD_CIRCUMFLEX
-#define CSA_C_CEDILLA           KC_RBRACKET         // Ç
-#define CSA_CCED                CSA_C_CEDILLA
+#define CSA_DEAD_CIRCUMFLEX KC_LBRACKET  // dead ^
+#define CSA_DCRC CSA_DEAD_CIRCUMFLEX
+#define CSA_C_CEDILLA KC_RBRACKET  // Ç
+#define CSA_CCED CSA_C_CEDILLA
 
 // Third row
-#define CSA_E_GRAVE     KC_QUOT     // è
-#define CSA_EGRV        CSA_E_GRAVE
-#define CSA_A_GRAVE     KC_BSLASH   // à
-#define CSA_AGRV        CSA_A_GRAVE
+#define CSA_E_GRAVE KC_QUOT  // è
+#define CSA_EGRV CSA_E_GRAVE
+#define CSA_A_GRAVE KC_BSLASH  // à
+#define CSA_AGRV CSA_A_GRAVE
 
 // Fourth row
-#define CSA_U_GRAVE     KC_NONUS_BSLASH     // ù
-#define CSA_UGRV        CSA_U_GRAVE
-#define CSA_E_ACUTE     KC_SLSH             // é
-#define CSA_ECUT        CSA_E_ACUTE
+#define CSA_U_GRAVE KC_NONUS_BSLASH  // ù
+#define CSA_UGRV CSA_U_GRAVE
+#define CSA_E_ACUTE KC_SLSH  // é
+#define CSA_ECUT CSA_E_ACUTE
 
 // Shifted characters
 // First row
-#define CSA_BACKSLASH   LSFT(CSA_SLASH) /* \ */
-#define CSA_BSLS        CSA_BACKSLASH
-#define CSA_QUESTION    LSFT(KC_6)      // ?
-#define CSA_QEST        CSA_QUESTION
+#define CSA_BACKSLASH LSFT(CSA_SLASH) /* \ */
+#define CSA_BSLS CSA_BACKSLASH
+#define CSA_QUESTION LSFT(KC_6)  // ?
+#define CSA_QEST CSA_QUESTION
 
 // Second row
-#define CSA_DEAD_TREMA  LSFT(CSA_DEAD_CIRCUMFLEX)    // dead trema/umlaut/diaresis for ä ë ï ö ü
-#define CSA_DTRM        CSA_DEAD_TREMA
+#define CSA_DEAD_TREMA LSFT(CSA_DEAD_CIRCUMFLEX)  // dead trema/umlaut/diaresis for ä ë ï ö ü
+#define CSA_DTRM CSA_DEAD_TREMA
 
 // Third row
 // all same as US-QWERTY, or capitalised character of the non-shifted key
 
 // Fourth row
-#define CSA_APOSTROPHE      LSFT(KC_COMMA)  // '
-#define CSA_APOS            CSA_APOSTROPHE
-#define CSA_DOUBLE_QUOTE    LSFT(KC_DOT)    // "
-#define CSA_DQOT            CSA_DOUBLE_QUOTE
+#define CSA_APOSTROPHE LSFT(KC_COMMA)  // '
+#define CSA_APOS CSA_APOSTROPHE
+#define CSA_DOUBLE_QUOTE LSFT(KC_DOT)  // "
+#define CSA_DQOT CSA_DOUBLE_QUOTE
 
 // Alt Gr-ed characters
 // First row
-#define CSA_PIPE                ALGR(CSA_SLASH)         // |
-#define CSA_CURRENCY            ALGR(KC_4)              // ¤
-#define CSA_CURR                CSA_CURRENCY
-#define CSA_LEFT_CURLY_BRACE    ALGR(KC_7)              // {
-#define CSA_LCBR                CSA_LEFT_CURLY_BRACE
-#define CSA_RIGHT_CURLY_BRACE   ALGR(KC_8)              // }
-#define CSA_RCBR                CSA_RIGHT_CURLY_BRACE
-#define CSA_LBRACKET            ALGR(KC_9)              // [
-#define CSA_LBRC                CSA_LBRACKET
-#define CSA_RBRACKET            ALGR(KC_0)              // ]
-#define CSA_RBRC                CSA_RBRACKET
-#define CSA_NEGATION            ALGR(KC_EQUAL)          // ¬
-#define CSA_NEGT                CSA_NEGATION
+#define CSA_PIPE ALGR(CSA_SLASH)  // |
+#define CSA_CURRENCY ALGR(KC_4)   // ¤
+#define CSA_CURR CSA_CURRENCY
+#define CSA_LEFT_CURLY_BRACE ALGR(KC_7)  // {
+#define CSA_LCBR CSA_LEFT_CURLY_BRACE
+#define CSA_RIGHT_CURLY_BRACE ALGR(KC_8)  // }
+#define CSA_RCBR CSA_RIGHT_CURLY_BRACE
+#define CSA_LBRACKET ALGR(KC_9)  // [
+#define CSA_LBRC CSA_LBRACKET
+#define CSA_RBRACKET ALGR(KC_0)  // ]
+#define CSA_RBRC CSA_RBRACKET
+#define CSA_NEGATION ALGR(KC_EQUAL)  // ¬
+#define CSA_NEGT CSA_NEGATION
 
 // Second row
 // euro symbol not available on Linux? (X.org)
-#define CSA_EURO        ALGR(KC_E)                  // €
-#define CSA_DEAD_GRAVE  ALGR(CSA_DEAD_CIRCUMFLEX)
-#define CSA_DGRV        CSA_DEAD_GRAVE              // dead `
-#define CSA_DEAD_TILDE  ALGR(CSA_C_CEDILLA)         // ~
-#define CSA_DTLD        CSA_DEAD_TILDE
+#define CSA_EURO ALGR(KC_E)  // €
+#define CSA_DEAD_GRAVE ALGR(CSA_DEAD_CIRCUMFLEX)
+#define CSA_DGRV CSA_DEAD_GRAVE             // dead `
+#define CSA_DEAD_TILDE ALGR(CSA_C_CEDILLA)  // ~
+#define CSA_DTLD CSA_DEAD_TILDE
 
 // Third row
-#define CSA_DEGREE  ALGR(KC_SCOLON)     // °
-#define CSA_DEGR    CSA_DEGREE
+#define CSA_DEGREE ALGR(KC_SCOLON)  // °
+#define CSA_DEGR CSA_DEGREE
 
 // Fourth row
-#define CSA_LEFT_GUILLEMET      ALGR(KC_Z)          // «
-#define CSA_LGIL                CSA_LEFT_GUILLEMET
-#define CSA_RIGHT_GUILLEMET     ALGR(KC_X)          // »
-#define CSA_RGIL                CSA_RIGHT_GUILLEMET
-#define CSA_LESS                ALGR(KC_COMMA)      // <
-#define CSA_GREATER             ALGR(KC_DOT)        // >
-#define CSA_GRTR                CSA_GREATER
+#define CSA_LEFT_GUILLEMET ALGR(KC_Z)  // «
+#define CSA_LGIL CSA_LEFT_GUILLEMET
+#define CSA_RIGHT_GUILLEMET ALGR(KC_X)  // »
+#define CSA_RGIL CSA_RIGHT_GUILLEMET
+#define CSA_LESS ALGR(KC_COMMA)   // <
+#define CSA_GREATER ALGR(KC_DOT)  // >
+#define CSA_GRTR CSA_GREATER
 
 // Space bar
-#define CSA_NON_BREAKING_SPACE  ALGR(KC_SPACE)
-#define CSA_NBSP                CSA_NON_BREAKING_SPACE
+#define CSA_NON_BREAKING_SPACE ALGR(KC_SPACE)
+#define CSA_NBSP CSA_NON_BREAKING_SPACE
 
 // GR2A-ed characters
 // First row
-#define CSA_SUPERSCRIPT_ONE     GR2A(KC_1)  // ¹
-#define CSA_SUP1                CSA_SUPERSCRIPT_ONE
-#define CSA_SUPERSCRIPT_TWO     GR2A(KC_2)  // ²
-#define CSA_SUP2                CSA_SUPERSCRIPT_TWO
-#define CSA_SUPERSCRIPT_THREE   GR2A(KC_3)  // ³
-#define CSA_SUP3                CSA_SUPERSCRIPT_THREE
-#define CSA_ONE_QUARTER         GR2A(KC_4)  // ¼
-#define CSA_1QRT                CSA_ONE_QUARTER
-#define CSA_ONE_HALF            GR2A(KC_5)  // ½
-#define CSA_1HLF                CSA_ONE_HALF
-#define CSA_THREE_QUARTERS      GR2A(KC_6)  // ¾
-#define CSA_3QRT                CSA_THREE_QUARTERS
+#define CSA_SUPERSCRIPT_ONE GR2A(KC_1)  // ¹
+#define CSA_SUP1 CSA_SUPERSCRIPT_ONE
+#define CSA_SUPERSCRIPT_TWO GR2A(KC_2)  // ²
+#define CSA_SUP2 CSA_SUPERSCRIPT_TWO
+#define CSA_SUPERSCRIPT_THREE GR2A(KC_3)  // ³
+#define CSA_SUP3 CSA_SUPERSCRIPT_THREE
+#define CSA_ONE_QUARTER GR2A(KC_4)  // ¼
+#define CSA_1QRT CSA_ONE_QUARTER
+#define CSA_ONE_HALF GR2A(KC_5)  // ½
+#define CSA_1HLF CSA_ONE_HALF
+#define CSA_THREE_QUARTERS GR2A(KC_6)  // ¾
+#define CSA_3QRT CSA_THREE_QUARTERS
 // nothing on 7-0 and -
-#define CSA_DEAD_CEDILLA        GR2A(KC_EQUAL)  // dead ¸
-#define CSA_DCED                CSA_DEAD_CEDILLA
+#define CSA_DEAD_CEDILLA GR2A(KC_EQUAL)  // dead ¸
+#define CSA_DCED CSA_DEAD_CEDILLA
 
 // Second row
-#define CSA_OMEGA           GR2A(KC_Q)  // ω
-#define CSA_OMEG            CSA_OMEGA
-#define CSA_L_STROKE        GR2A(KC_W)  // ł
-#define CSA_LSTK            CSA_L_STROKE
-#define CSA_OE_LIGATURE     GR2A(KC_E)  // œ
-#define CSA_OE              CSA_OE_LIGATURE
-#define CSA_PARAGRAPH       GR2A(KC_R)  // ¶
-#define CSA_PARG            CSA_PARAGRAPH
-#define CSA_T_STROKE        GR2A(KC_T)  // ŧ
-#define CSA_LEFT_ARROW      GR2A(KC_Y)  // ←
-#define CSA_LARW            CSA_LEFT_ARROW
-#define CSA_DOWN_ARROW      GR2A(KC_U)  // ↓
-#define CSA_DARW            CSA_DOWN_ARROW
-#define CSA_RIGHT_ARROW     GR2A(KC_I)  // →
-#define CSA_RARW            CSA_RIGHT_ARROW
-#define CSA_O_STROKE        GR2A(KC_O)  // ø
-#define CSA_OSTK            CSA_O_STROKE
-#define CSA_THORN           GR2A(KC_P)  // þ
-#define CSA_THRN            CSA_THORN
+#define CSA_OMEGA GR2A(KC_Q)  // ω
+#define CSA_OMEG CSA_OMEGA
+#define CSA_L_STROKE GR2A(KC_W)  // ł
+#define CSA_LSTK CSA_L_STROKE
+#define CSA_OE_LIGATURE GR2A(KC_E)  // œ
+#define CSA_OE CSA_OE_LIGATURE
+#define CSA_PARAGRAPH GR2A(KC_R)  // ¶
+#define CSA_PARG CSA_PARAGRAPH
+#define CSA_T_STROKE GR2A(KC_T)    // ŧ
+#define CSA_LEFT_ARROW GR2A(KC_Y)  // ←
+#define CSA_LARW CSA_LEFT_ARROW
+#define CSA_DOWN_ARROW GR2A(KC_U)  // ↓
+#define CSA_DARW CSA_DOWN_ARROW
+#define CSA_RIGHT_ARROW GR2A(KC_I)  // →
+#define CSA_RARW CSA_RIGHT_ARROW
+#define CSA_O_STROKE GR2A(KC_O)  // ø
+#define CSA_OSTK CSA_O_STROKE
+#define CSA_THORN GR2A(KC_P)  // þ
+#define CSA_THRN CSA_THORN
 // nothing on ^
-#define CSA_TILDE           GR2A(CSA_C_CEDILLA)  // dead ~
-#define CSA_TILD            CSA_TILDE
+#define CSA_TILDE GR2A(CSA_C_CEDILLA)  // dead ~
+#define CSA_TILD CSA_TILDE
 
 // Third row
-#define CSA_AE_LIGATURE     GR2A(KC_A)      // æ
-#define CSA_AE              CSA_AE_LIGATURE
-#define CSA_SHARP_S         GR2A(KC_S)      // ß
-#define CSA_SRPS            CSA_SHARP_S
-#define CSA_ETH             GR2A(KC_D)      // ð
+#define CSA_AE_LIGATURE GR2A(KC_A)  // æ
+#define CSA_AE CSA_AE_LIGATURE
+#define CSA_SHARP_S GR2A(KC_S)  // ß
+#define CSA_SRPS CSA_SHARP_S
+#define CSA_ETH GR2A(KC_D)  // ð
 // nothing on F
-#define CSA_ENG             GR2A(KC_G)      // ŋ
-#define CSA_H_SRTOKE        GR2A(KC_H)      // ħ
-#define CSA_HSTK            CSA_H_SRTOKE
-#define CSA_IJ_LIGATURE     GR2A(KC_J)      // ij
-#define CSA_IJ              CSA_IJ_LIGATURE
-#define CSA_KRA             GR2A(KC_K)      // ĸ
-#define CSA_L_FLOWN_DOT     GR2A(KC_L)      // ŀ
-#define CSA_LFLD            CSA_L_FLOWN_DOT
-#define CSA_DEAD_ACUTE      GR2A(KC_SCLN)   // dead acute accent
-#define CSA_DACT            CSA_DEAD_ACUTE
+#define CSA_ENG GR2A(KC_G)       // ŋ
+#define CSA_H_SRTOKE GR2A(KC_H)  // ħ
+#define CSA_HSTK CSA_H_SRTOKE
+#define CSA_IJ_LIGATURE GR2A(KC_J)  // ij
+#define CSA_IJ CSA_IJ_LIGATURE
+#define CSA_KRA GR2A(KC_K)          // ĸ
+#define CSA_L_FLOWN_DOT GR2A(KC_L)  // ŀ
+#define CSA_LFLD CSA_L_FLOWN_DOT
+#define CSA_DEAD_ACUTE GR2A(KC_SCLN)  // dead acute accent
+#define CSA_DACT CSA_DEAD_ACUTE
 // nothing on È & À
 
 // Fourth row
-#define CSA_CENT                GR2A(KC_C)  // ¢
-#define CSA_LEFT_DOUBLE_QUOTE   GR2A(KC_V)  // “
-#define CSA_LDQT                CSA_LEFT_DOUBLE_QUOTE
-#define CSA_RIGHT_DOUBLE_QUOTE  GR2A(KC_B)  // ”
-#define CSA_RDQT                CSA_RIGHT_DOUBLE_QUOTE
-#define CSA_N_APOSTROPHE        GR2A(KC_N)  // ʼn (deprecated unicode codepoint)
-#define CSA_NAPO                CSA_N_APOSTROPHE
-#define CSA_MU                  GR2A(KC_M)  // μ
-#define CSA_HORIZONTAL_BAR      GR2A(KC_COMMA)  // ―
-#define CSA_HZBR                CSA_HORIZONTAL_BAR
-#define CSA_DEAD_DOT_ABOVE      GR2A(KC_DOT)    // dead ˙
-#define CSA_DDTA                CSA_DEAD_DOT_ABOVE
+#define CSA_CENT GR2A(KC_C)               // ¢
+#define CSA_LEFT_DOUBLE_QUOTE GR2A(KC_V)  // “
+#define CSA_LDQT CSA_LEFT_DOUBLE_QUOTE
+#define CSA_RIGHT_DOUBLE_QUOTE GR2A(KC_B)  // ”
+#define CSA_RDQT CSA_RIGHT_DOUBLE_QUOTE
+#define CSA_N_APOSTROPHE GR2A(KC_N)  // ʼn (deprecated unicode codepoint)
+#define CSA_NAPO CSA_N_APOSTROPHE
+#define CSA_MU GR2A(KC_M)                  // μ
+#define CSA_HORIZONTAL_BAR GR2A(KC_COMMA)  // ―
+#define CSA_HZBR CSA_HORIZONTAL_BAR
+#define CSA_DEAD_DOT_ABOVE GR2A(KC_DOT)  // dead ˙
+#define CSA_DDTA CSA_DEAD_DOT_ABOVE
 
 // GR2A-shifted characters (different from capitalised GR2A-ed characters)
 // First row
-#define CSA_SOFT_HYPHEN         GR2A(LSFT(CSA_SLASH))   // soft-hyphen, appears as a hyphen in wrapped word
-#define CSA_SHYP                CSA_SOFT_HYPHEN
-#define CSA_INVERTED_EXCLAIM    GR2A(KC_EXCLAIM)    // ¡
-#define CSA_IXLM                CSA_INVERTED_EXCLAIM
+#define CSA_SOFT_HYPHEN GR2A(LSFT(CSA_SLASH))  // soft-hyphen, appears as a hyphen in wrapped word
+#define CSA_SHYP CSA_SOFT_HYPHEN
+#define CSA_INVERTED_EXCLAIM GR2A(KC_EXCLAIM)  // ¡
+#define CSA_IXLM CSA_INVERTED_EXCLAIM
 // nothing on 2
-#define CSA_POUND               GR2A(LSFT(KC_3))    // £
-#define CSA_GBP                 CSA_POUND_SIGN
+#define CSA_POUND GR2A(LSFT(KC_3))  // £
+#define CSA_GBP CSA_POUND_SIGN
 // already on ALGR(KC_E)
-#define CSA_EURO_BIS            GR2A(LSFT(KC_4))    // €
-#define CSA_EURB                CSA_EURO_BIS
-#define CSA_THREE_EIGHTHS       GR2A(LSFT(KC_5))    // ⅜
-#define CSA_3ON8                CSA_THREE_EIGHTHS
-#define CSA_FIVE_EIGHTHS        GR2A(LSFT(KC_6))    // ⅝
-#define CSA_5ON8                CSA_FIVE_EIGHTHS
-#define CSA_SEVEN_EIGHTHS       GR2A(LSFT(KC_7))    // ⅞
-#define CSA_7ON8                CSA_SEVEN_EIGHTHS
-#define CSA_TRADEMARK           GR2A(LSFT(KC_8))    // ™
-#define CSA_TM                  CSA_TRADEMARK
-#define CSA_PLUS_MINUS          GR2A(LSFT(KC_9))    // ±
-#define CSA_PSMS                CSA_PLUS_MINUS
+#define CSA_EURO_BIS GR2A(LSFT(KC_4))  // €
+#define CSA_EURB CSA_EURO_BIS
+#define CSA_THREE_EIGHTHS GR2A(LSFT(KC_5))  // ⅜
+#define CSA_3ON8 CSA_THREE_EIGHTHS
+#define CSA_FIVE_EIGHTHS GR2A(LSFT(KC_6))  // ⅝
+#define CSA_5ON8 CSA_FIVE_EIGHTHS
+#define CSA_SEVEN_EIGHTHS GR2A(LSFT(KC_7))  // ⅞
+#define CSA_7ON8 CSA_SEVEN_EIGHTHS
+#define CSA_TRADEMARK GR2A(LSFT(KC_8))  // ™
+#define CSA_TM CSA_TRADEMARK
+#define CSA_PLUS_MINUS GR2A(LSFT(KC_9))  // ±
+#define CSA_PSMS CSA_PLUS_MINUS
 // nothing on 0
-#define CSA_INVERTED_QUESTION   GR2A(LSFT(KC_MINUS))    // ¿
-#define CSA_IQST                CSA_INVERTED_QUESTION
-#define CSA_DEAD_OGONEK         GR2A(LSFT(KC_EQUAL))    // dead ˛
-#define CSA_DOGO                CSA_DEAD_OGONEK
+#define CSA_INVERTED_QUESTION GR2A(LSFT(KC_MINUS))  // ¿
+#define CSA_IQST CSA_INVERTED_QUESTION
+#define CSA_DEAD_OGONEK GR2A(LSFT(KC_EQUAL))  // dead ˛
+#define CSA_DOGO CSA_DEAD_OGONEK
 
 // Second row
-#define CSA_REGISTERED_TRADEMARK    GR2A(LSFT(KC_R))        // ®
-#define CSA_RTM                     CSA_REGISTERED_TRADEMARK
-#define CSA_YEN                     GR2A(LSFT(KC_Y))        // ¥
-#define CSA_YUAN                    CSA_YEN
-#define CSA_UP_ARROW                LSFT(CSA_DOWN_ARROW)    // ↑
-#define CSA_DOTLESS_I               GR2A(LSFT(KC_I))        // ı
-#define CSA_DLSI                    CSA_DOTLESS_I
-#define CSA_DEAD_RING               GR2A(LSFT(CSA_DCRC))    // dead °
-#define CSA_DRNG                    CSA_DEAD_RING
-#define CSA_DEAD_MACRON             GR2A(LSFT(CSA_C_CEDILLA))   // dead ¯
-#define CSA_DMCR                    CSA_DEAD_MACRON
+#define CSA_REGISTERED_TRADEMARK GR2A(LSFT(KC_R))  // ®
+#define CSA_RTM CSA_REGISTERED_TRADEMARK
+#define CSA_YEN GR2A(LSFT(KC_Y))  // ¥
+#define CSA_YUAN CSA_YEN
+#define CSA_UP_ARROW LSFT(CSA_DOWN_ARROW)  // ↑
+#define CSA_DOTLESS_I GR2A(LSFT(KC_I))     // ı
+#define CSA_DLSI CSA_DOTLESS_I
+#define CSA_DEAD_RING GR2A(LSFT(CSA_DCRC))  // dead °
+#define CSA_DRNG CSA_DEAD_RING
+#define CSA_DEAD_MACRON GR2A(LSFT(CSA_C_CEDILLA))  // dead ¯
+#define CSA_DMCR CSA_DEAD_MACRON
 
 // Third row
-#define CSA_SECTION                 GR2A(LSFT(KC_S))        // §
-#define CSA_SECT                    CSA_SECTION
-#define CSA_ORDINAL_INDICATOR_A     GR2A(LSFT(KC_F))        // ª
-#define CSA_ORDA                    CSA_ORDINAL_INDICATOR_A
-#define CSA_DEAD_DOUBLE_ACUTE       LSFT(CSA_DEAD_ACUTE)    // ˝
-#define CSA_DDCT                    CSA_DEAD_DOUBLE_ACUTE
-#define CSA_DEAD_CARON              GR2A(LSFT(CSA_E_GRAVE)) // dead ˇ
-#define CSA_DCAR                    CSA_DEAD_CARON
-#define CSA_DEAD_BREVE              GR2A(LSFT(CSA_A_GRAVE)) // dead ˘
-#define CSA_DBRV                    CSA_DEAD_BREVE
+#define CSA_SECTION GR2A(LSFT(KC_S))  // §
+#define CSA_SECT CSA_SECTION
+#define CSA_ORDINAL_INDICATOR_A GR2A(LSFT(KC_F))  // ª
+#define CSA_ORDA CSA_ORDINAL_INDICATOR_A
+#define CSA_DEAD_DOUBLE_ACUTE LSFT(CSA_DEAD_ACUTE)  // ˝
+#define CSA_DDCT CSA_DEAD_DOUBLE_ACUTE
+#define CSA_DEAD_CARON GR2A(LSFT(CSA_E_GRAVE))  // dead ˇ
+#define CSA_DCAR CSA_DEAD_CARON
+#define CSA_DEAD_BREVE GR2A(LSFT(CSA_A_GRAVE))  // dead ˘
+#define CSA_DBRV CSA_DEAD_BREVE
 
 // Fourth row
-#define CSA_BROKEN_PIPE         GR2A(LSFT(CSA_U_GRAVE)) // ¦
-#define CSA_BPIP                CSA_BROKEN_PIPE
-#define CSA_COPYRIGHT           GR2A(LSFT(KC_C))        // ©
-#define CSA_CPRT                CSA_COPYRIGHT
-#define CSA_LEFT_QUOTE          GR2A(LSFT(KC_V))        // ‘
-#define CSA_LQOT                CSA_LEFT_QUOTE
-#define CSA_RIGHT_QUOTE         GR2A(LSFT(KC_B))        // ’
-#define CSA_RQOT                CSA_RIGHT_QUOTE
-#define CSA_EIGHTH_NOTE         GR2A(LSFT(KC_N))        // ♪
-#define CSA_8NOT                CSA_EIGHTH_NOTE
-#define CSA_ORDINAL_INDICATOR_O GR2A(LSFT(KC_M))        // º
-#define CSA_ORDO                CSA_ORDINAL_INDICATOR_O
-#define CSA_TIMES               GR2A(LSFT(KC_COMMA))    // ×
-#define CSA_TIMS                CSA_TIMES
-#define CSA_OBELUS              GR2A(LSFT(KC_DOT))      // ÷
-#define CSA_OBEL                CSA_OBELUS
+#define CSA_BROKEN_PIPE GR2A(LSFT(CSA_U_GRAVE))  // ¦
+#define CSA_BPIP CSA_BROKEN_PIPE
+#define CSA_COPYRIGHT GR2A(LSFT(KC_C))  // ©
+#define CSA_CPRT CSA_COPYRIGHT
+#define CSA_LEFT_QUOTE GR2A(LSFT(KC_V))  // ‘
+#define CSA_LQOT CSA_LEFT_QUOTE
+#define CSA_RIGHT_QUOTE GR2A(LSFT(KC_B))  // ’
+#define CSA_RQOT CSA_RIGHT_QUOTE
+#define CSA_EIGHTH_NOTE GR2A(LSFT(KC_N))  // ♪
+#define CSA_8NOT CSA_EIGHTH_NOTE
+#define CSA_ORDINAL_INDICATOR_O GR2A(LSFT(KC_M))  // º
+#define CSA_ORDO CSA_ORDINAL_INDICATOR_O
+#define CSA_TIMES GR2A(LSFT(KC_COMMA))  // ×
+#define CSA_TIMS CSA_TIMES
+#define CSA_OBELUS GR2A(LSFT(KC_DOT))  // ÷
+#define CSA_OBEL CSA_OBELUS
 // more conventional name of the symbol
-#define CSA_DIVISION_SIGN       CSA_OBELUS
-#define CSA_DVSN                CSA_DIVISION_SIGN
+#define CSA_DIVISION_SIGN CSA_OBELUS
+#define CSA_DVSN CSA_DIVISION_SIGN
 // TODO GR2A(LSFT(CSA_E_ACUTE))
 
 #endif

quantum/keymap_extras/keymap_colemak.h

@@ -18,73 +18,73 @@
 
 #include "keymap.h"
 // For software implementation of colemak
-#define CM_Q    KC_Q
-#define CM_W    KC_W
-#define CM_F    KC_E
-#define CM_P    KC_R
-#define CM_G    KC_T
-#define CM_J    KC_Y
-#define CM_L    KC_U
-#define CM_U    KC_I
-#define CM_Y    KC_O
+#define CM_Q KC_Q
+#define CM_W KC_W
+#define CM_F KC_E
+#define CM_P KC_R
+#define CM_G KC_T
+#define CM_J KC_Y
+#define CM_L KC_U
+#define CM_U KC_I
+#define CM_Y KC_O
 #define CM_SCLN KC_P
 
-#define CM_A    KC_A
-#define CM_R    KC_S
-#define CM_S    KC_D
-#define CM_T    KC_F
-#define CM_D    KC_G
-#define CM_H    KC_H
-#define CM_N    KC_J
-#define CM_E    KC_K
-#define CM_I    KC_L
-#define CM_O    KC_SCLN
+#define CM_A KC_A
+#define CM_R KC_S
+#define CM_S KC_D
+#define CM_T KC_F
+#define CM_D KC_G
+#define CM_H KC_H
+#define CM_N KC_J
+#define CM_E KC_K
+#define CM_I KC_L
+#define CM_O KC_SCLN
 #define CM_COLN LSFT(CM_SCLN)
 
-#define CM_Z    KC_Z
-#define CM_X    KC_X
-#define CM_C    KC_C
-#define CM_V    KC_V
-#define CM_B    KC_B
-#define CM_K    KC_N
-#define CM_M    KC_M
+#define CM_Z KC_Z
+#define CM_X KC_X
+#define CM_C KC_C
+#define CM_V KC_V
+#define CM_B KC_B
+#define CM_K KC_N
+#define CM_M KC_M
 #define CM_COMM KC_COMM
-#define CM_DOT  KC_DOT
+#define CM_DOT KC_DOT
 #define CM_SLSH KC_SLSH
 
 // Make it easy to support these in macros
 // TODO: change macro implementation so these aren't needed
-#define KC_CM_Q    CM_Q
-#define KC_CM_W    CM_W
-#define KC_CM_F    CM_F
-#define KC_CM_P    CM_P
-#define KC_CM_G    CM_G
-#define KC_CM_J    CM_J
-#define KC_CM_L    CM_L
-#define KC_CM_U    CM_U
-#define KC_CM_Y    CM_Y
+#define KC_CM_Q CM_Q
+#define KC_CM_W CM_W
+#define KC_CM_F CM_F
+#define KC_CM_P CM_P
+#define KC_CM_G CM_G
+#define KC_CM_J CM_J
+#define KC_CM_L CM_L
+#define KC_CM_U CM_U
+#define KC_CM_Y CM_Y
 #define KC_CM_SCLN CM_SCLN
 
-#define KC_CM_A    CM_A
-#define KC_CM_R    CM_R
-#define KC_CM_S    CM_S
-#define KC_CM_T    CM_T
-#define KC_CM_D    CM_D
-#define KC_CM_H    CM_H
-#define KC_CM_N    CM_N
-#define KC_CM_E    CM_E
-#define KC_CM_I    CM_I
-#define KC_CM_O    CM_O
+#define KC_CM_A CM_A
+#define KC_CM_R CM_R
+#define KC_CM_S CM_S
+#define KC_CM_T CM_T
+#define KC_CM_D CM_D
+#define KC_CM_H CM_H
+#define KC_CM_N CM_N
+#define KC_CM_E CM_E
+#define KC_CM_I CM_I
+#define KC_CM_O CM_O
 
-#define KC_CM_Z    CM_Z
-#define KC_CM_X    CM_X
-#define KC_CM_C    CM_C
-#define KC_CM_V    CM_V
-#define KC_CM_B    CM_B
-#define KC_CM_K    CM_K
-#define KC_CM_M    CM_M
+#define KC_CM_Z CM_Z
+#define KC_CM_X CM_X
+#define KC_CM_C CM_C
+#define KC_CM_V CM_V
+#define KC_CM_B CM_B
+#define KC_CM_K CM_K
+#define KC_CM_M CM_M
 #define KC_CM_COMM CM_COMM
-#define KC_CM_DOT  CM_DOT
+#define KC_CM_DOT CM_DOT
 #define KC_CM_SLSH CM_SLSH
 
 #endif

quantum/keymap_extras/keymap_dvorak.h

@@ -19,82 +19,82 @@
 #include "keymap.h"
 
 // Normal characters
-#define DV_GRV	KC_GRV
-#define DV_1	KC_1
-#define DV_2	KC_2
-#define DV_3	KC_3
-#define DV_4	KC_4
-#define DV_5	KC_5
-#define DV_6	KC_6
-#define DV_7	KC_7
-#define DV_8	KC_8
-#define DV_9	KC_9
-#define DV_0	KC_0
-#define DV_LBRC	KC_MINS
-#define DV_RBRC	KC_EQL
+#define DV_GRV KC_GRV
+#define DV_1 KC_1
+#define DV_2 KC_2
+#define DV_3 KC_3
+#define DV_4 KC_4
+#define DV_5 KC_5
+#define DV_6 KC_6
+#define DV_7 KC_7
+#define DV_8 KC_8
+#define DV_9 KC_9
+#define DV_0 KC_0
+#define DV_LBRC KC_MINS
+#define DV_RBRC KC_EQL
 
-#define DV_QUOT	KC_Q
-#define DV_COMM	KC_W
-#define DV_DOT	KC_E
-#define DV_P	KC_R
-#define DV_Y	KC_T
-#define	DV_F	KC_Y
-#define DV_G	KC_U
-#define DV_C	KC_I
-#define	DV_R	KC_O
-#define DV_L	KC_P
-#define DV_SLSH	KC_LBRC
-#define DV_EQL	KC_RBRC
-#define DV_BSLS	KC_BSLS
+#define DV_QUOT KC_Q
+#define DV_COMM KC_W
+#define DV_DOT KC_E
+#define DV_P KC_R
+#define DV_Y KC_T
+#define DV_F KC_Y
+#define DV_G KC_U
+#define DV_C KC_I
+#define DV_R KC_O
+#define DV_L KC_P
+#define DV_SLSH KC_LBRC
+#define DV_EQL KC_RBRC
+#define DV_BSLS KC_BSLS
 
-#define DV_A	KC_A
-#define DV_O	KC_S
-#define DV_E	KC_D
-#define DV_U	KC_F
-#define DV_I	KC_G
-#define DV_D	KC_H
-#define DV_H	KC_J
-#define DV_T	KC_K
-#define DV_N	KC_L
-#define DV_S	KC_SCLN
-#define DV_MINS	KC_QUOT
+#define DV_A KC_A
+#define DV_O KC_S
+#define DV_E KC_D
+#define DV_U KC_F
+#define DV_I KC_G
+#define DV_D KC_H
+#define DV_H KC_J
+#define DV_T KC_K
+#define DV_N KC_L
+#define DV_S KC_SCLN
+#define DV_MINS KC_QUOT
 
-#define DV_SCLN	KC_Z
-#define DV_Q	KC_X
-#define DV_J	KC_C
-#define DV_K	KC_V
-#define DV_X	KC_B
-#define DV_B	KC_N
-#define DV_M	KC_M
-#define DV_W	KC_COMM
-#define DV_V	KC_DOT
-#define DV_Z	KC_SLSH
+#define DV_SCLN KC_Z
+#define DV_Q KC_X
+#define DV_J KC_C
+#define DV_K KC_V
+#define DV_X KC_B
+#define DV_B KC_N
+#define DV_M KC_M
+#define DV_W KC_COMM
+#define DV_V KC_DOT
+#define DV_Z KC_SLSH
 
 // Shifted characters
-#define DV_TILD	LSFT(DV_GRV)
-#define DV_EXLM	LSFT(DV_1)
-#define DV_AT	LSFT(DV_2)
-#define DV_HASH	LSFT(DV_3)
-#define DV_DLR	LSFT(DV_4)
-#define DV_PERC	LSFT(DV_5)
-#define DV_CIRC	LSFT(DV_6)
-#define DV_AMPR	LSFT(DV_7)
-#define DV_ASTR	LSFT(DV_8)
-#define DV_LPRN	LSFT(DV_9)
-#define DV_RPRN	LSFT(DV_0)
-#define DV_LCBR	LSFT(DV_LBRC)
-#define DV_RCBR	LSFT(DV_RBRC)
+#define DV_TILD LSFT(DV_GRV)
+#define DV_EXLM LSFT(DV_1)
+#define DV_AT LSFT(DV_2)
+#define DV_HASH LSFT(DV_3)
+#define DV_DLR LSFT(DV_4)
+#define DV_PERC LSFT(DV_5)
+#define DV_CIRC LSFT(DV_6)
+#define DV_AMPR LSFT(DV_7)
+#define DV_ASTR LSFT(DV_8)
+#define DV_LPRN LSFT(DV_9)
+#define DV_RPRN LSFT(DV_0)
+#define DV_LCBR LSFT(DV_LBRC)
+#define DV_RCBR LSFT(DV_RBRC)
 
-#define DV_DQUO	LSFT(DV_QUOT)
-#define DV_LABK	LSFT(DV_COMM)
-#define DV_RABK	LSFT(DV_DOT)
+#define DV_DQUO LSFT(DV_QUOT)
+#define DV_LABK LSFT(DV_COMM)
+#define DV_RABK LSFT(DV_DOT)
 
-#define DV_QUES	LSFT(DV_SLSH)
-#define DV_PLUS	LSFT(DV_EQL)
-#define DV_PIPE	LSFT(DV_BSLS)
+#define DV_QUES LSFT(DV_SLSH)
+#define DV_PLUS LSFT(DV_EQL)
+#define DV_PIPE LSFT(DV_BSLS)
 
-#define DV_UNDS	LSFT(DV_MINS)
+#define DV_UNDS LSFT(DV_MINS)
 
-#define DV_COLN	LSFT(DV_SCLN)
+#define DV_COLN LSFT(DV_SCLN)
 
 #endif

quantum/keymap_extras/keymap_dvp.h

@@ -20,79 +20,79 @@
 #include "keymap.h"
 
 // Normal characters
-#define DP_DLR	KC_GRV
-#define DP_AMPR	KC_1
-#define DP_LBRC	KC_2
-#define DP_LCBR	KC_3
-#define DP_RCBR	KC_4
-#define DP_LPRN	KC_5
-#define DP_EQL	KC_6
-#define DP_ASTR	KC_7
-#define DP_RPRN	KC_8
-#define DP_PLUS	KC_9
-#define DP_RBRC	KC_0
-#define DP_EXLM	KC_MINS
-#define DP_HASH	KC_EQL
+#define DP_DLR KC_GRV
+#define DP_AMPR KC_1
+#define DP_LBRC KC_2
+#define DP_LCBR KC_3
+#define DP_RCBR KC_4
+#define DP_LPRN KC_5
+#define DP_EQL KC_6
+#define DP_ASTR KC_7
+#define DP_RPRN KC_8
+#define DP_PLUS KC_9
+#define DP_RBRC KC_0
+#define DP_EXLM KC_MINS
+#define DP_HASH KC_EQL
 
-#define DP_SCLN	KC_Q
-#define DP_COMM	KC_W
-#define DP_DOT	KC_E
-#define DP_P	KC_R
-#define DP_Y	KC_T
-#define DP_F	KC_Y
-#define DP_G	KC_U
-#define DP_C	KC_I
-#define DP_R	KC_O
-#define DP_L	KC_P
-#define DP_SLSH	KC_LBRC
-#define DP_AT	KC_RBRC
-#define DP_BSLS	KC_BSLS
+#define DP_SCLN KC_Q
+#define DP_COMM KC_W
+#define DP_DOT KC_E
+#define DP_P KC_R
+#define DP_Y KC_T
+#define DP_F KC_Y
+#define DP_G KC_U
+#define DP_C KC_I
+#define DP_R KC_O
+#define DP_L KC_P
+#define DP_SLSH KC_LBRC
+#define DP_AT KC_RBRC
+#define DP_BSLS KC_BSLS
 
-#define DP_A	KC_A
-#define DP_O	KC_S
-#define DP_E	KC_D
-#define DP_U	KC_F
-#define DP_I	KC_G
-#define DP_D	KC_H
-#define DP_H	KC_J
-#define DP_T	KC_K
-#define DP_N	KC_L
-#define DP_S	KC_SCLN
-#define DP_MINS	KC_QUOT
+#define DP_A KC_A
+#define DP_O KC_S
+#define DP_E KC_D
+#define DP_U KC_F
+#define DP_I KC_G
+#define DP_D KC_H
+#define DP_H KC_J
+#define DP_T KC_K
+#define DP_N KC_L
+#define DP_S KC_SCLN
+#define DP_MINS KC_QUOT
 
-#define DP_QUOT	KC_Z
-#define DP_Q	KC_X
-#define DP_J	KC_C
-#define DP_K	KC_V
-#define DP_X	KC_B
-#define DP_B	KC_N
-#define DP_M	KC_M
-#define DP_W	KC_COMM
-#define DP_V	KC_DOT
-#define DP_Z	KC_SLSH
+#define DP_QUOT KC_Z
+#define DP_Q KC_X
+#define DP_J KC_C
+#define DP_K KC_V
+#define DP_X KC_B
+#define DP_B KC_N
+#define DP_M KC_M
+#define DP_W KC_COMM
+#define DP_V KC_DOT
+#define DP_Z KC_SLSH
 
 // Shifted characters
-#define DP_TILD	LSFT(DP_DLR)
-#define DP_PERC	LSFT(DP_AMPR)
-#define DP_7	LSFT(DP_LBRC)
-#define DP_5	LSFT(DP_LCBR)
-#define DP_3	LSFT(DP_RCBR)
-#define DP_1	LSFT(DP_LPRN)
-#define DP_9	LSFT(DP_EQL)
-#define DP_0	LSFT(DP_ASTR)
-#define DP_2	LSFT(DP_RPRN)
-#define DP_4	LSFT(DP_PLUS)
-#define DP_6	LSFT(DP_RBRC)
-#define DP_8	LSFT(DP_EXLM)
-#define DP_GRV	LSFT(DP_HASH)
+#define DP_TILD LSFT(DP_DLR)
+#define DP_PERC LSFT(DP_AMPR)
+#define DP_7 LSFT(DP_LBRC)
+#define DP_5 LSFT(DP_LCBR)
+#define DP_3 LSFT(DP_RCBR)
+#define DP_1 LSFT(DP_LPRN)
+#define DP_9 LSFT(DP_EQL)
+#define DP_0 LSFT(DP_ASTR)
+#define DP_2 LSFT(DP_RPRN)
+#define DP_4 LSFT(DP_PLUS)
+#define DP_6 LSFT(DP_RBRC)
+#define DP_8 LSFT(DP_EXLM)
+#define DP_GRV LSFT(DP_HASH)
 
-#define DP_COLN	LSFT(DP_SCLN)
-#define DP_LABK	LSFT(DP_COMM)
-#define DP_RABK	LSFT(DP_DOT)
-#define DP_QUES	LSFT(DP_SLSH)
-#define DP_CIRC	LSFT(DP_AT)
-#define DP_PIPE	LSFT(DP_BSLS)
-#define DP_UNDS	LSFT(DP_MINS)
-#define DP_DQUO	LSFT(DP_QUOT)
+#define DP_COLN LSFT(DP_SCLN)
+#define DP_LABK LSFT(DP_COMM)
+#define DP_RABK LSFT(DP_DOT)
+#define DP_QUES LSFT(DP_SLSH)
+#define DP_CIRC LSFT(DP_AT)
+#define DP_PIPE LSFT(DP_BSLS)
+#define DP_UNDS LSFT(DP_MINS)
+#define DP_DQUO LSFT(DP_QUOT)
 
 #endif

quantum/keymap_extras/keymap_fr_ch.h

@@ -66,44 +66,44 @@
 #define FR_CH_UE KC_LBRC
 #define FR_CH_OE KC_SCLN
 
-#define FR_CH_CIRC KC_EQL // accent circumflex ^ and grave ` and ~
-#define FR_CH_LESS KC_NUBS // < and > and backslash
-#define FR_CH_MINS KC_SLSH // - and _
-#define FR_CH_DLR KC_BSLS // $, £ and }
-#define FR_CH_PARA KC_GRV // § and ring °
-#define FR_CH_DIAE KC_RBRC // accent ¨
+#define FR_CH_CIRC KC_EQL   // accent circumflex ^ and grave ` and ~
+#define FR_CH_LESS KC_NUBS  // < and > and backslash
+#define FR_CH_MINS KC_SLSH  // - and _
+#define FR_CH_DLR KC_BSLS   // $, £ and }
+#define FR_CH_PARA KC_GRV   // § and ring °
+#define FR_CH_DIAE KC_RBRC  // accent ¨
 
 // shifted characters
-#define FR_CH_RING LSFT(KC_GRV) // °
-#define FR_CH_EXLM LSFT(KC_RBRC) // !
-#define FR_CH_PLUS LSFT(KC_1) // +
-#define FR_CH_DQOT LSFT(KC_2) // "
-#define FR_CH_ASTR LSFT(KC_3) // *
-#define FR_CH_PERC LSFT(KC_5) // %
-#define FR_CH_AMPR LSFT(KC_6) // &
-#define FR_CH_SLSH LSFT(KC_7) // /
-#define FR_CH_LPRN LSFT(KC_8) // (
-#define FR_CH_RPRN LSFT(KC_9) // )
-#define FR_CH_EQL  LSFT(KC_0) // =
-#define FR_CH_QST  LSFT(FR_CH_QUOT) // ?
-#define FR_CH_MORE LSFT(FR_CH_LESS) // >
-#define FR_CH_COLN LSFT(KC_DOT) // :
-#define FR_CH_SCLN LSFT(KC_COMM) // ;
-#define FR_CH_UNDS LSFT(FR_CH_MINS) // _
-#define FR_CH_CCED LSFT(KC_4) // ç
-#define FR_CH_GRV  LSFT(FR_CH_CIRC) // accent grave `
+#define FR_CH_RING LSFT(KC_GRV)      // °
+#define FR_CH_EXLM LSFT(KC_RBRC)     // !
+#define FR_CH_PLUS LSFT(KC_1)        // +
+#define FR_CH_DQOT LSFT(KC_2)        // "
+#define FR_CH_ASTR LSFT(KC_3)        // *
+#define FR_CH_PERC LSFT(KC_5)        // %
+#define FR_CH_AMPR LSFT(KC_6)        // &
+#define FR_CH_SLSH LSFT(KC_7)        // /
+#define FR_CH_LPRN LSFT(KC_8)        // (
+#define FR_CH_RPRN LSFT(KC_9)        // )
+#define FR_CH_EQL LSFT(KC_0)         // =
+#define FR_CH_QST LSFT(FR_CH_QUOT)   // ?
+#define FR_CH_MORE LSFT(FR_CH_LESS)  // >
+#define FR_CH_COLN LSFT(KC_DOT)      // :
+#define FR_CH_SCLN LSFT(KC_COMM)     // ;
+#define FR_CH_UNDS LSFT(FR_CH_MINS)  // _
+#define FR_CH_CCED LSFT(KC_4)        // ç
+#define FR_CH_GRV LSFT(FR_CH_CIRC)   // accent grave `
 
 // Alt Gr-ed characters
-#define FR_CH_LCBR ALGR(KC_QUOT) // {
-#define FR_CH_LBRC ALGR(KC_LBRC) // [
-#define FR_CH_RBRC ALGR(KC_9) // ]
-#define FR_CH_RCBR ALGR(KC_0) // }
-#define FR_CH_BSLS ALGR(FR_CH_LESS) // backslash
-#define FR_CH_AT   ALGR(KC_2) // @
-#define FR_CH_EURO ALGR(KC_E) // €
-#define FR_CH_TILD ALGR(FR_CH_CIRC) // ~
-#define FR_CH_PIPE ALGR(KC_1) // |
-#define FR_CH_HASH ALGR(KC_3) // #
-#define FR_CH_ACUT ALGR(FR_CH_QUOT) // accent acute ´
+#define FR_CH_LCBR ALGR(KC_QUOT)     // {
+#define FR_CH_LBRC ALGR(KC_LBRC)     // [
+#define FR_CH_RBRC ALGR(KC_9)        // ]
+#define FR_CH_RCBR ALGR(KC_0)        // }
+#define FR_CH_BSLS ALGR(FR_CH_LESS)  // backslash
+#define FR_CH_AT ALGR(KC_2)          // @
+#define FR_CH_EURO ALGR(KC_E)        // €
+#define FR_CH_TILD ALGR(FR_CH_CIRC)  // ~
+#define FR_CH_PIPE ALGR(KC_1)        // |
+#define FR_CH_HASH ALGR(KC_3)        // #
+#define FR_CH_ACUT ALGR(FR_CH_QUOT)  // accent acute ´
 
 #endif

quantum/keymap_extras/keymap_french.h

@@ -19,76 +19,76 @@
 #include "keymap.h"
 
 // Normal characters
-#define FR_SUP2	KC_GRV
-#define FR_AMP	KC_1
-#define FR_EACU	KC_2
-#define FR_QUOT	KC_3
-#define FR_APOS	KC_4
-#define FR_LPRN	KC_5
-#define FR_MINS	KC_6
-#define FR_EGRV	KC_7
-#define FR_UNDS	KC_8
-#define FR_CCED	KC_9
-#define FR_AGRV	KC_0
-#define FR_RPRN	KC_MINS
-#define FR_EQL	KC_EQL
+#define FR_SUP2 KC_GRV
+#define FR_AMP KC_1
+#define FR_EACU KC_2
+#define FR_QUOT KC_3
+#define FR_APOS KC_4
+#define FR_LPRN KC_5
+#define FR_MINS KC_6
+#define FR_EGRV KC_7
+#define FR_UNDS KC_8
+#define FR_CCED KC_9
+#define FR_AGRV KC_0
+#define FR_RPRN KC_MINS
+#define FR_EQL KC_EQL
 
-#define FR_A 	KC_Q
-#define FR_Z	KC_W
-#define	FR_CIRC	KC_LBRC
-#define FR_DLR	KC_RBRC
+#define FR_A KC_Q
+#define FR_Z KC_W
+#define FR_CIRC KC_LBRC
+#define FR_DLR KC_RBRC
 
-#define FR_Q 	KC_A
-#define FR_M 	KC_SCLN
-#define FR_UGRV	KC_QUOT
-#define FR_ASTR	KC_NUHS
+#define FR_Q KC_A
+#define FR_M KC_SCLN
+#define FR_UGRV KC_QUOT
+#define FR_ASTR KC_NUHS
 
-#define FR_LESS	KC_NUBS
-#define FR_W	KC_Z
-#define FR_COMM	KC_M
-#define FR_SCLN	KC_COMM
-#define FR_COLN	KC_DOT
-#define FR_EXLM	KC_SLSH
+#define FR_LESS KC_NUBS
+#define FR_W KC_Z
+#define FR_COMM KC_M
+#define FR_SCLN KC_COMM
+#define FR_COLN KC_DOT
+#define FR_EXLM KC_SLSH
 
 // Shifted characters
-#define FR_1 	LSFT(KC_1)
-#define FR_2 	LSFT(KC_2)
-#define FR_3 	LSFT(KC_3)
-#define FR_4 	LSFT(KC_4)
-#define FR_5 	LSFT(KC_5)
-#define FR_6 	LSFT(KC_6)
-#define FR_7 	LSFT(KC_7)
-#define FR_8 	LSFT(KC_8)
-#define FR_9 	LSFT(KC_9)
-#define FR_0 	LSFT(KC_0)
-#define FR_OVRR	LSFT(FR_RPRN)
+#define FR_1 LSFT(KC_1)
+#define FR_2 LSFT(KC_2)
+#define FR_3 LSFT(KC_3)
+#define FR_4 LSFT(KC_4)
+#define FR_5 LSFT(KC_5)
+#define FR_6 LSFT(KC_6)
+#define FR_7 LSFT(KC_7)
+#define FR_8 LSFT(KC_8)
+#define FR_9 LSFT(KC_9)
+#define FR_0 LSFT(KC_0)
+#define FR_OVRR LSFT(FR_RPRN)
 #define FR_PLUS LSFT(FR_EQL)
 
-#define FR_UMLT	LSFT(FR_CIRC)
-#define FR_PND	LSFT(FR_DLR)
-#define	FR_PERC	LSFT(FR_UGRV)
-#define FR_MU 	LSFT(FR_ASTR)
+#define FR_UMLT LSFT(FR_CIRC)
+#define FR_PND LSFT(FR_DLR)
+#define FR_PERC LSFT(FR_UGRV)
+#define FR_MU LSFT(FR_ASTR)
 
-#define FR_GRTR	LSFT(FR_LESS)
-#define FR_QUES	LSFT(FR_COMM)
-#define FR_DOT	LSFT(FR_SCLN)
-#define FR_SLSH	LSFT(FR_COLN)
-#define FR_SECT	LSFT(FR_EXLM)
+#define FR_GRTR LSFT(FR_LESS)
+#define FR_QUES LSFT(FR_COMM)
+#define FR_DOT LSFT(FR_SCLN)
+#define FR_SLSH LSFT(FR_COLN)
+#define FR_SECT LSFT(FR_EXLM)
 
 // Alt Gr-ed characters
-#define FR_TILD	ALGR(KC_2)
-#define FR_HASH	ALGR(KC_3)
+#define FR_TILD ALGR(KC_2)
+#define FR_HASH ALGR(KC_3)
 #define FR_LCBR ALGR(KC_4)
-#define FR_LBRC	ALGR(KC_5)
+#define FR_LBRC ALGR(KC_5)
 #define FR_PIPE ALGR(KC_6)
-#define FR_GRV 	ALGR(KC_7)
-#define FR_BSLS	ALGR(KC_8)
-#define FR_CCIRC	ALGR(KC_9)
-#define FR_AT 	ALGR(KC_0)
-#define FR_RBRC	ALGR(FR_RPRN)
+#define FR_GRV ALGR(KC_7)
+#define FR_BSLS ALGR(KC_8)
+#define FR_CCIRC ALGR(KC_9)
+#define FR_AT ALGR(KC_0)
+#define FR_RBRC ALGR(FR_RPRN)
 #define FR_RCBR ALGR(FR_EQL)
 
-#define FR_EURO	ALGR(KC_E)
-#define FR_BULT	ALGR(FR_DLR)
+#define FR_EURO ALGR(KC_E)
+#define FR_BULT ALGR(FR_DLR)
 
 #endif

quantum/keymap_extras/keymap_french_osx.h

@@ -19,74 +19,74 @@
 #include "keymap.h"
 
 // Normal characters
-#define FR_AT 	KC_GRV
-#define FR_AMP	KC_1
-#define FR_EACU	KC_2
-#define FR_QUOT	KC_3
-#define FR_APOS	KC_4
-#define FR_LPRN	KC_5
-#define FR_SECT	KC_6
-#define FR_EGRV	KC_7
-#define FR_EXLM	KC_8
-#define FR_CCED	KC_9
-#define FR_AGRV	KC_0
-#define FR_RPRN	KC_MINS
-#define FR_MINS	KC_EQL
+#define FR_AT KC_GRV
+#define FR_AMP KC_1
+#define FR_EACU KC_2
+#define FR_QUOT KC_3
+#define FR_APOS KC_4
+#define FR_LPRN KC_5
+#define FR_SECT KC_6
+#define FR_EGRV KC_7
+#define FR_EXLM KC_8
+#define FR_CCED KC_9
+#define FR_AGRV KC_0
+#define FR_RPRN KC_MINS
+#define FR_MINS KC_EQL
 
-#define FR_A 	KC_Q
-#define FR_Z	KC_W
-#define FR_CIRC	KC_LBRC
-#define FR_DLR	KC_RBRC
+#define FR_A KC_Q
+#define FR_Z KC_W
+#define FR_CIRC KC_LBRC
+#define FR_DLR KC_RBRC
 
-#define FR_Q 	KC_A
-#define FR_M 	KC_SCLN
-#define FR_UGRV	KC_QUOT
-#define FR_GRV	KC_NUHS
+#define FR_Q KC_A
+#define FR_M KC_SCLN
+#define FR_UGRV KC_QUOT
+#define FR_GRV KC_NUHS
 
-#define FR_LESS	KC_NUBS
-#define FR_W	KC_Z
-#define FR_COMM	KC_M
-#define FR_SCLN	KC_COMM
-#define FR_COLN	KC_DOT
-#define FR_EQL	KC_SLSH
+#define FR_LESS KC_NUBS
+#define FR_W KC_Z
+#define FR_COMM KC_M
+#define FR_SCLN KC_COMM
+#define FR_COLN KC_DOT
+#define FR_EQL KC_SLSH
 
 // Shifted characters
-#define FR_HASH	LSFT(KC_GRV)
-#define FR_1 	LSFT(KC_1)
-#define FR_2 	LSFT(KC_2)
-#define FR_3 	LSFT(KC_3)
-#define FR_4 	LSFT(KC_4)
-#define FR_5 	LSFT(KC_5)
-#define FR_6 	LSFT(KC_6)
-#define FR_7 	LSFT(KC_7)
-#define FR_8 	LSFT(KC_8)
-#define FR_9 	LSFT(KC_9)
-#define FR_0 	LSFT(KC_0)
-#define FR_UNDS	LSFT(FR_MINS)
+#define FR_HASH LSFT(KC_GRV)
+#define FR_1 LSFT(KC_1)
+#define FR_2 LSFT(KC_2)
+#define FR_3 LSFT(KC_3)
+#define FR_4 LSFT(KC_4)
+#define FR_5 LSFT(KC_5)
+#define FR_6 LSFT(KC_6)
+#define FR_7 LSFT(KC_7)
+#define FR_8 LSFT(KC_8)
+#define FR_9 LSFT(KC_9)
+#define FR_0 LSFT(KC_0)
+#define FR_UNDS LSFT(FR_MINS)
 
-#define FR_UMLT	LSFT(FR_CIRC)
-#define FR_ASTR	LSFT(FR_DLR)
+#define FR_UMLT LSFT(FR_CIRC)
+#define FR_ASTR LSFT(FR_DLR)
 
-#define FR_PERC	LSFT(FR_UGRV)
-#define FR_PND	LSFT(FR_GRV)
+#define FR_PERC LSFT(FR_UGRV)
+#define FR_PND LSFT(FR_GRV)
 
-#define FR_GRTR	LSFT(FR_LESS)
-#define FR_QUES	LSFT(FR_COMM)
-#define FR_DOT	LSFT(FR_SCLN)
-#define FR_SLSH	LSFT(FR_COLN)
-#define FR_PLUS	LSFT(FR_EQL)
+#define FR_GRTR LSFT(FR_LESS)
+#define FR_QUES LSFT(FR_COMM)
+#define FR_DOT LSFT(FR_SCLN)
+#define FR_SLSH LSFT(FR_COLN)
+#define FR_PLUS LSFT(FR_EQL)
 
 // Alted characters
-#define FR_LCBR	LALT(KC_5)
-#define FR_RCBR	LALT(FR_RPRN)
-#define FR_EURO	LALT(KC_E)
-#define FR_BULT	LALT(FR_DLR)
-#define FR_TILD	LALT(KC_N)
+#define FR_LCBR LALT(KC_5)
+#define FR_RCBR LALT(FR_RPRN)
+#define FR_EURO LALT(KC_E)
+#define FR_BULT LALT(FR_DLR)
+#define FR_TILD LALT(KC_N)
 
 // Shift+Alt-ed characters
-#define FR_LBRC	LSFT(LALT(KC_5))
-#define FR_RBRC	LSFT(LALT(FR_RPRN))
-#define FR_PIPE	LSFT(LALT(KC_L))
-#define FR_BSLS	LSFT(LALT(FR_COLN))
+#define FR_LBRC LSFT(LALT(KC_5))
+#define FR_RBRC LSFT(LALT(FR_RPRN))
+#define FR_PIPE LSFT(LALT(KC_L))
+#define FR_BSLS LSFT(LALT(FR_COLN))
 
 #endif

quantum/keymap_extras/keymap_german.h

@@ -67,45 +67,45 @@
 #define DE_UE KC_LBRC
 #define DE_OE KC_SCLN
 
-#define DE_CIRC KC_GRAVE // accent circumflex ^ and ring °
-#define DE_ACUT KC_EQL // accent acute ´ and grave `
-#define DE_PLUS KC_RBRC // + and * and ~
-#define DE_HASH KC_BSLS // # and '
-#define DE_LESS KC_NUBS // < and > and |
-#define DE_MINS KC_SLSH // - and _
+#define DE_CIRC KC_GRAVE  // accent circumflex ^ and ring °
+#define DE_ACUT KC_EQL    // accent acute ´ and grave `
+#define DE_PLUS KC_RBRC   // + and * and ~
+#define DE_HASH KC_BSLS   // # and '
+#define DE_LESS KC_NUBS   // < and > and |
+#define DE_MINS KC_SLSH   // - and _
 
 // shifted characters
-#define DE_RING LSFT(DE_CIRC) // °
-#define DE_EXLM LSFT(KC_1) // !
-#define DE_DQOT LSFT(KC_2) // "
-#define DE_PARA LSFT(KC_3) // §
-#define DE_DLR  LSFT(KC_4) // $
-#define DE_PERC LSFT(KC_5) // %
-#define DE_AMPR LSFT(KC_6) // &
-#define DE_SLSH LSFT(KC_7) // /
-#define DE_LPRN LSFT(KC_8) // (
-#define DE_RPRN LSFT(KC_9) // )
-#define DE_EQL  LSFT(KC_0) // =
-#define DE_QST  LSFT(DE_SS) // ?
-#define DE_GRV  LSFT(DE_ACUT) // `
-#define DE_ASTR LSFT(DE_PLUS) // *
-#define DE_QUOT LSFT(DE_HASH) // '
-#define DE_MORE LSFT(DE_LESS) // >
-#define DE_COLN LSFT(KC_DOT) // :
-#define DE_SCLN LSFT(KC_COMM) // ;
-#define DE_UNDS LSFT(DE_MINS) // _
+#define DE_RING LSFT(DE_CIRC)  // °
+#define DE_EXLM LSFT(KC_1)     // !
+#define DE_DQOT LSFT(KC_2)     // "
+#define DE_PARA LSFT(KC_3)     // §
+#define DE_DLR LSFT(KC_4)      // $
+#define DE_PERC LSFT(KC_5)     // %
+#define DE_AMPR LSFT(KC_6)     // &
+#define DE_SLSH LSFT(KC_7)     // /
+#define DE_LPRN LSFT(KC_8)     // (
+#define DE_RPRN LSFT(KC_9)     // )
+#define DE_EQL LSFT(KC_0)      // =
+#define DE_QST LSFT(DE_SS)     // ?
+#define DE_GRV LSFT(DE_ACUT)   // `
+#define DE_ASTR LSFT(DE_PLUS)  // *
+#define DE_QUOT LSFT(DE_HASH)  // '
+#define DE_MORE LSFT(DE_LESS)  // >
+#define DE_COLN LSFT(KC_DOT)   // :
+#define DE_SCLN LSFT(KC_COMM)  // ;
+#define DE_UNDS LSFT(DE_MINS)  // _
 
 // Alt Gr-ed characters
-#define DE_SQ2 ALGR(KC_2) // ²
-#define DE_SQ3 ALGR(KC_3) // ³
-#define DE_LCBR ALGR(KC_7) // {
-#define DE_LBRC ALGR(KC_8) // [
-#define DE_RBRC ALGR(KC_9) // ]
-#define DE_RCBR ALGR(KC_0) // }
-#define DE_BSLS ALGR(DE_SS) // backslash
-#define DE_AT  ALGR(KC_Q) // @
-#define DE_EURO ALGR(KC_E) // €
-#define DE_TILD ALGR(DE_PLUS) // ~
-#define DE_PIPE ALGR(DE_LESS) // |
+#define DE_SQ2 ALGR(KC_2)      // ²
+#define DE_SQ3 ALGR(KC_3)      // ³
+#define DE_LCBR ALGR(KC_7)     // {
+#define DE_LBRC ALGR(KC_8)     // [
+#define DE_RBRC ALGR(KC_9)     // ]
+#define DE_RCBR ALGR(KC_0)     // }
+#define DE_BSLS ALGR(DE_SS)    // backslash
+#define DE_AT ALGR(KC_Q)       // @
+#define DE_EURO ALGR(KC_E)     // €
+#define DE_TILD ALGR(DE_PLUS)  // ~
+#define DE_PIPE ALGR(DE_LESS)  // |
 
 #endif