Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware

.gitignore

@@ -13,4 +13,9 @@ tags
 build/
 *.bak
 .vagrant/
-.DS_STORE
+.DS_STORE
+
+# Eclipse Settings
+.cproject
+.project
+.settings/

keyboard/atreus/Makefile

@@ -58,6 +58,15 @@ else
     SRC := keymaps/keymap_default.c $(SRC)
 endif
 
+ifdef TEENSY2
+    OPT_DEFS += -DATREUS_TEENSY2
+    ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
+else
+    OPT_DEFS += -DATREUS_ASTAR
+    ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+                            avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
+endif
+
 CONFIG_H = config.h
 
 # MCU name
@@ -114,8 +123,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   comment out to disable the options.
 #
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-#MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-#EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
 CONSOLE_ENABLE = yes	# Console for debug(+400)
 COMMAND_ENABLE = yes    # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -137,3 +146,7 @@ VPATH += $(TMK_DIR)
 
 include $(TOP_DIR)/quantum/quantum.mk
 
+USB ?= /dev/cu.usbmodem1411
+
+upload: build
+	$(ATRUES_UPLOAD_COMMAND)

keyboard/atreus/README.md

@@ -1,10 +1,6 @@
 atreus keyboard firmware
 ======================
 
-## Note
-
-This is for the Teensy2 hand wired boards only.
-
 ## Quantum MK Firmware
 
 You have access to a bunch of goodies! Check out the Makefile to enable/disable some of the features. Uncomment the `#` to enable them. Setting them to `no` does nothing and will only confuse future you.
@@ -14,6 +10,12 @@ You have access to a bunch of goodies! Check out the Makefile to enable/disable
     # UNICODE_ENABLE = yes # Unicode support - this is commented out, just as an example. You have to use #, not //
     BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
 
+## Atreus specific information
+
+These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2, one powered by an A-Star. This repository currently assumes that you have an A-Star powered Atreus. If you are using a Teensy2, specify that by adding `TEENSY2=yes` to your `make` commands.
+
+If you are coming from the [atreus-firmware](https://github.com/technomancy/atreus-firmware), we've also brought forward the `make upload` command for you to use.
+
 ## Quick aliases to common actions
 
 Your keymap can include shortcuts to common operations (called "function actions" in tmk).

keyboard/atreus/atreus.h

@@ -7,21 +7,20 @@
 #include <stddef.h>
 
 // This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
 #define KEYMAP( \
-	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
-	k30, k31, k32, k33, k34,    k35,   k37, k38, k39, k3a, k3b \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a \
 ) \
 { \
-	{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
-	{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
-	{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
-	{ k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \
-} 
+	{ k00, k01, k02, k03, k04, KC_NO, k05, k06, k07, k08, k09 }, \
+	{ k10, k11, k12, k13, k14, KC_NO, k15, k16, k17, k18, k19 }, \
+	{ k20, k21, k22, k23, k24, k35,   k25, k26, k27, k28, k29 }, \
+	{ k2a, k30, k31, k32, k33, k34,   k36, k37, k38, k39, k3a } \
+}
 
 void * matrix_init_user(void);
 void * matrix_scan_user(void);

keyboard/atreus/config.h

@@ -33,11 +33,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 4
 #define MATRIX_COLS 11
 
-// Planck PCB default pin-out
 // Change this to how you wired your keyboard
 // COLS: Left to right, ROWS: Top to bottom
-#define COLS (int []){ F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0}
-#define ROWS (int []){ D0, D1, D2, D3 }
+#if defined(ATREUS_ASTAR)
+  #define COLS (int []){ B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 }
+  #define ROWS (int []){ D0, D1, D3, D2 }
+#elif defined(ATREUS_TEENSY2)
+  #define COLS (int []){ F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0}
+  #define ROWS (int []){ D0, D1, D2, D3 }
+#endif
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW

keyboard/atreus/keymaps/keymap_gerb.c

@@ -0,0 +1,66 @@
+// This is the personal keymap of Chris Gerber (@gerbercj). I haven't worked out the kinks
+// with the Colemak and Dvorak support yet, but everything else works nicely.
+
+#include "atreus.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QW 0
+#define _CM 1
+#define _DV 2
+#define _L1 3
+#define _L2 4
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QW] = { /* Qwerty */
+    {KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_NO,   KC_Y,    KC_U,    KC_I,    KC_O,    KC_P   },
+    {KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_NO,   KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN},
+    {KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LALT, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH},
+    {KC_ESC,  KC_TAB,  KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC,  MO(_L1), KC_MINS, KC_QUOT, KC_ENT }
+  },
+  [_CM] = { /* Colemak */
+    {KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_NO,   KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN},
+    {KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_NO,   KC_H,    KC_N,    KC_E,    KC_I,    KC_O   },
+    {KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LALT, KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH},
+    {KC_ESC,  KC_TAB,  KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC,  MO(_L1), KC_MINS, KC_QUOT, KC_ENT }
+  },
+  [_DV] = { /* Dvorak */
+    {KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_NO,   KC_F,    KC_G,    KC_C,    KC_R,    KC_L   },
+    {KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_NO,   KC_D,    KC_H,    KC_T,    KC_N,    KC_S   },
+    {KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_LALT, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z   },
+    {KC_ESC,  KC_TAB,  KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC,  MO(_L1), KC_MINS, KC_SLSH, KC_ENT }
+  },
+  [_L1] = { /* LAYER 1 */
+    {KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_NO,   KC_VOLU, KC_7,    KC_8,    KC_9,    KC_LBRC},
+    {KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_NO,   KC_VOLD, KC_4,    KC_5,    KC_6,    KC_RBRC},
+    {KC_GRV,  KC_MPRV, KC_MPLY, KC_MNXT, KC_MINS, KC_LALT, KC_MUTE, KC_1,    KC_2,    KC_3,    KC_BSLS},
+    {TG(_L2), KC_APP,  KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC,  KC_TRNS, KC_DOT,  KC_0,    KC_EQL }
+  },
+  [_L2] = { /* LAYER 2 */
+    {KC_TRNS, KC_WH_L, KC_MS_U, KC_WH_R, KC_WH_U, KC_NO,   DF(_QW), KC_F7,   KC_F8,   KC_F9,   KC_F10 },
+    {KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, KC_NO,   DF(_CM), KC_F6,   KC_F5,   KC_F6,   KC_F11 },
+    {KC_BTN4, KC_BTN1, KC_BTN2, KC_BTN3, KC_BTN4, KC_LALT, DF(_DV), KC_F1,   KC_F2,   KC_F3,   KC_F12 },
+    {KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC,  KC_TRNS, KC_TRNS, KC_TRNS, RESET  }
+  }
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};

keyboard/ergodox_ez/keymaps/tm2030/README.md

@@ -55,7 +55,7 @@ As on the original TM 2030, when `num` layer is activated, holding `fn` disables
 ## Dvorak Layer
 Same as Layer 0 but with _Dvorak_ layout, to use with QWERTY OS layout.
 
-Enable Dvorak layout with [`Magic`](/TMK_README.md#magic-commands+`1` (`LShift`+`RShift`+`1`), disable with `Magic`-`0`.
+Enable Dvorak layout with [`Magic`](/TMK_README.md#magic-commands)+`1` (`LShift`+`RShift`+`1`), disable with `Magic`-`0`.
 
 The middle (green) led indicates when the Dvorak layer is activated.
 

keyboard/ergodox_ez/keymaps/tm2030/keymap.c

@@ -11,9 +11,6 @@
 
 #define MDBL0 1
 #define MFNLR 2
-#define MCUT  3
-#define MCOPY 4
-#define MPSTE 5
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Basic layer
@@ -142,7 +139,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                KC_TRNS,
                                                KC_TRNS, KC_TRNS,KC_TRNS,
        // right hand
-       KC_INS,  KC_F6,   KC_F7,   KC_TAB,  KC_PSLS, KC_PAST, KC_PMNS,
+       KC_TRNS, KC_F6,   KC_F7,   KC_TAB,  KC_PSLS, KC_PAST, KC_PMNS,
        KC_TRNS, KC_TRNS, KC_HOME, KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
                 KC_UP,   KC_END,  KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
        KC_LEFT, KC_DOWN, KC_RGHT, KC_P1,   KC_P2,   KC_P3,   KC_PENT,
@@ -178,7 +175,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        KC_TRNS, KC_TRNS, KC_TRNS,      KC_TRNS,     KC_TRNS,      KC_TRNS, KC_INS,
        KC_TRNS, KC_TRNS, KC_TRNS,      KC_TRNS,     KC_TRNS,      KC_TRNS, KC_VOLU,
        KC_TRNS, KC_TRNS, KC_TRNS,      KC_CALC,     KC_MAIL,      KC_WHOM,
-       KC_TRNS, KC_TRNS, M(MCUT),      M(MCOPY),    M(MPSTE),     KC_MUTE, KC_VOLD,
+       KC_TRNS, KC_TRNS, LSFT(KC_DELT),LCTL(KC_INS),LSFT(KC_INS), KC_MUTE, KC_VOLD,
        KC_TRNS, KC_TRNS, KC_TRNS,      KC_TRNS,     KC_TRNS,
 
                                            KC_TRNS, KC_TRNS,
@@ -210,22 +207,8 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             }
         break;
         case MFNLR:
-            layer_state ^= (1 << NUMR) | (1 << FNLR);
-            break;
-        case MCUT:
-            if (record->event.pressed) {
-                return MACRO(D(LSFT), T(DELT), U(LSFT), END);
-            }
-            break;
-        case MCOPY:
-            if (record->event.pressed) {
-                return MACRO(D(LCTL), T(INS), U(LCTL), END);
-            }
-            break;
-        case MPSTE:
-            if (record->event.pressed) {
-                return MACRO(D(LSFT), T(INS), U(LSFT), END);
-            }
+            layer_invert(NUMR);
+            layer_invert(FNLR);
             break;
     }
     return MACRO_NONE;
@@ -233,7 +216,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 
 // Runs just one time when the keyboard initializes.
 void * matrix_init_user(void) {
-
+    return NULL;
 };
 
 // Runs constantly in the background, in a loop.
@@ -255,4 +238,5 @@ void * matrix_scan_user(void) {
     if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
       ergodox_right_led_3_on();
     }
+    return NULL;
 };

keyboard/planck/keymaps/lukas.c

@@ -0,0 +1,64 @@
+#include "planck.h"
+#ifdef BACKLIGHT_ENABLE
+  #include "backlight.h"
+#endif
+
+// This simple keymap is optimized for xmonad users using super as their modifier key.
+// M(1) makes it possible to change virtual screens and swap windows between them.
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+#define _QW 0
+#define _LW 1
+#define _RS 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QW] = { /* Qwerty */
+    {KC_TAB,  KC_Q,    KC_W,    KC_E, KC_R,    KC_T,   KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+    {KC_ESC,  KC_A,    KC_S,    KC_D, KC_F,    KC_G,   KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+    {KC_LSFT, KC_Z,    KC_X,    KC_C, KC_V,    KC_B,   KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+    {KC_LCTL, KC_LALT, KC_LGUI, M(1), MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+  },
+  [_RS] = { /* RAISE */
+    {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL },
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
+  },
+  [_LW] = { /* LOWER */
+    {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_TRNS},
+    {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
+  }
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+  switch(id) {
+    case 0:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      break;
+    case 1:
+      if (record->event.pressed) {
+        register_code(KC_LGUI);
+        layer_on(_RS);
+      } else {
+        unregister_code(KC_LGUI);
+        layer_off(_RS);
+      }
+      break;
+  }
+  return MACRO_NONE;
+};

quantum/keymap_common.c

@@ -91,6 +91,9 @@ action_t action_for_key(uint8_t layer, keypos_t key)
             play_notes(&goodbye, 5, false);
         #endif
         _delay_ms(250);
+        #ifdef ATREUS_ASTAR
+            *(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific
+        #endif
         bootloader_jump();
         return;
     } else if (keycode == DEBUG) { // DEBUG is 0x5001

quantum/keymap_extras/keymap_dvorak.h

@@ -68,5 +68,7 @@
 #define DV_RPRN	LSFT(DV_0)
 #define DV_LCBR	LSFT(DV_LBRC)
 #define DV_RCBR	LSFT(DV_RBRC)
+#define DV_UNDS LSFT(DV_MINS)
+#define DV_PLUS LSFT(DV_EQL)
 
-#endif
+#endif

quantum/keymap_extras/keymap_fr_ch.h

@@ -0,0 +1,98 @@
+#ifndef KEYMAP_FR_CH
+#define KEYMAP_FR_CH
+
+#include "keymap_common.h"
+
+// Alt gr
+#define ALGR(kc) kc | 0x1400
+#define FR_CH_ALGR KC_RALT
+
+// normal characters
+#define FR_CH_Z KC_Y
+#define FR_CH_Y KC_Z
+
+#define FR_CH_A KC_A
+#define FR_CH_B KC_B
+#define FR_CH_C KC_C
+#define FR_CH_D KC_D
+#define FR_CH_E KC_E
+#define FR_CH_F KC_F
+#define FR_CH_G KC_G
+#define FR_CH_H KC_H
+#define FR_CH_I KC_I
+#define FR_CH_J KC_J
+#define FR_CH_K KC_K
+#define FR_CH_L KC_L
+#define FR_CH_M KC_M
+#define FR_CH_N KC_N
+#define FR_CH_O KC_O
+#define FR_CH_P KC_P
+#define FR_CH_Q KC_Q
+#define FR_CH_R KC_R
+#define FR_CH_S KC_S
+#define FR_CH_T KC_T
+#define FR_CH_U KC_U
+#define FR_CH_V KC_V
+#define FR_CH_W KC_W
+#define FR_CH_X KC_X
+
+#define FR_CH_0 KC_0
+#define FR_CH_1 KC_1
+#define FR_CH_2 KC_2
+#define FR_CH_3 KC_3
+#define FR_CH_4 KC_4
+#define FR_CH_5 KC_5
+#define FR_CH_6 KC_6
+#define FR_CH_7 KC_7
+#define FR_CH_8 KC_8
+#define FR_CH_9 KC_9
+
+#define FR_CH_DOT KC_DOT
+#define FR_CH_COMM KC_COMM
+
+#define FR_CH_QUOT KC_MINS
+#define FR_CH_AE KC_QUOT
+#define FR_CH_UE KC_LBRC
+#define FR_CH_OE KC_SCLN
+
+#define FR_CH_CIRC KC_EQL // accent circumflex ^ and grave ` and ~
+#define FR_CH_LESS KC_NUBS // < and > and backslash
+#define FR_CH_MINS KC_SLSH // - and _
+#define FR_CH_DLR KC_BSLS // $, £ and }
+#define FR_CH_PARA KC_GRV // § and ring °
+#define FR_CH_DIAE KC_RBRC // accent ¨
+
+// shifted characters
+#define FR_CH_RING LSFT(KC_GRV) // °
+#define FR_CH_EXLM LSFT(KC_RBRC) // !
+#define FR_CH_PLUS LSFT(KC_1) // +
+#define FR_CH_DQOT LSFT(KC_2) // "
+#define FR_CH_ASTR LSFT(KC_3) // *
+#define FR_CH_PERC LSFT(KC_5) // %
+#define FR_CH_AMPR LSFT(KC_6) // &
+#define FR_CH_SLSH LSFT(KC_7) // /
+#define FR_CH_LPRN LSFT(KC_8) // (
+#define FR_CH_RPRN LSFT(KC_9) // )
+#define FR_CH_EQL  LSFT(KC_0) // =
+#define FR_CH_QST  LSFT(FR_CH_QUOT) // ?
+#define FR_CH_MORE LSFT(FR_CH_LESS) // >
+#define FR_CH_COLN LSFT(KC_DOT) // :
+#define FR_CH_SCLN LSFT(KC_COMM) // ;
+#define FR_CH_UNDS LSFT(FR_CH_MINS) // _
+#define FR_CH_CCED LSFT(KC_4) // ç
+#define FR_CH_GRV  LSFT(FR_CH_CIRC) // accent grave `
+
+// Alt Gr-ed characters
+#define FR_CH_LCBR ALGR(KC_QUOT) // {
+#define FR_CH_LBRC ALGR(KC_LBRC) // [
+#define FR_CH_RBRC ALGR(KC_9) // ]
+#define FR_CH_RCBR ALGR(KC_0) // }
+#define FR_CH_BSLS ALGR(FR_CH_LESS) // backslash
+#define FR_CH_AT   ALGR(KC_2) // @
+#define FR_CH_EURO ALGR(KC_E) // €
+#define FR_CH_TILD ALGR(FR_CH_CIRC) // ~
+#define FR_CH_PIPE ALGR(KC_1) // |
+#define FR_CH_HASH ALGR(KC_3) // #
+#define FR_CH_ACUT ALGR(FR_CH_QUOT) // accent acute ´
+
+#endif

quantum/keymap_extras/keymap_french.h

@@ -75,7 +75,7 @@
 #define FR_CIRC	ALGR(KC_9)
 #define FR_AT 	ALGR(KC_0)
 #define FR_RBRC	ALGR(FR_RPRN)
-#define FR_LCBR ALGR(FR_EQL)
+#define FR_RCBR ALGR(FR_EQL)
 
 #define FR_EURO	ALGR(KC_E)
 #define FR_BULT	ALGR(FR_DLR)