Merge pull request #6 from jackhumbert/master

Merge from jackhumbert

keyboards/atreus/keymaps/jeremy/keymap.c

@@ -0,0 +1,66 @@
+// This is the personal keymap of Jeremy Cowgar (@jcowgar). It is written for the programmer.
+
+#include "atreus.h"
+#include "action_layer.h"
+#include "keymap_colemak.h"
+
+#define PREVENT_STUCK_MODIFIERS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+#define ALPH 0
+#define NUMS 1
+#define CURS 2
+#define SYMB 3
+#define FKEY 4
+
+// Some handy macros to keep the keymaps clean and easier to maintain
+#define KM_SAVE LGUI(CM_S)
+#define KM_CLSE LGUI(CM_W)
+#define KM_OPEN LGUI(CM_O)
+
+#define KM_COPY LGUI(KC_C)
+#define KM_CUT  LGUI(KC_X)
+#define KM_PAST LGUI(KC_V)
+#define KM_UNDO LGUI(KC_Z)
+#define KM_REDO LGUI(LSFT(KC_Z))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[ALPH] = {
+  {KC_Q,    KC_W,           KC_E,           KC_R,    KC_T,    KC_TRNS, KC_Y,    KC_U,    KC_I,           KC_O,           KC_P},
+  {KC_A,    LT(NUMS, KC_S), LT(FKEY, KC_D), KC_F,    KC_G,    KC_TRNS, KC_H,    KC_J,    LT(CURS, KC_K), LT(SYMB, KC_L), KC_SCLN},
+  {KC_Z,    KC_X,           KC_C,           KC_V,    KC_B,    KC_LALT, KC_N,    KC_M,    KC_COMM,        KC_DOT,         KC_SLSH},
+  {KC_LCTL, KC_ESC,         KC_NO,          KC_LSFT, KC_SPC,  KC_LGUI, KC_ENT,  KC_RSFT, KC_NO,          KC_ESC,         KC_RCTL}
+},
+[NUMS] = {
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_ASTR, KC_SLSH, KC_TRNS, KC_TRNS, KC_7,    KC_8,           KC_9,           KC_SLSH},
+  {KC_TRNS, KC_TRNS,        KC_EQL,         KC_PLUS, KC_MINS, KC_TRNS, KC_LPRN, KC_4,    KC_5,           KC_6,           KC_ASTR},
+  {KC_TRNS, KC_TRNS,        KC_DOT,         KC_COMM, CM_SCLN, KC_TRNS, KC_RPRN, KC_1,    KC_2,           KC_3,           KC_MINS},
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0,    KC_DOT,         KC_EQL,         KC_PLUS}
+},
+[CURS] = {
+  {KC_TRNS, KC_BSPC,        KC_UP,          KC_DELT, KC_PGUP, KC_TRNS, KC_TRNS, KM_SAVE, KC_TRNS,        KM_OPEN,        KC_TRNS},
+  {KC_TRNS, KC_LEFT,        KC_DOWN,        KC_RGHT, KC_PGDN, KC_TRNS, KM_UNDO, KC_LALT, KC_TRNS,        KC_LGUI,        KC_TRNS},
+  {KC_TRNS, KC_VOLD,        KC_MUTE,        KC_VOLU, KC_MPLY, KM_COPY, KM_REDO, KM_CLSE, KC_TRNS,        KC_TRNS,        KC_TRNS},
+  {KC_TRNS, KC_TRNS,        RESET,          KC_TRNS, KC_TAB,  KM_CUT,  KM_PAST, KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS}
+},
+[SYMB] = {
+  {KC_BSLS, KC_EXLM,        KC_LABK,        KC_RABK, CM_COLN, KC_TRNS, KC_UNDS, KC_DLR,  KC_QUES,       KC_TRNS,         KC_PERC},
+  {KC_AT,   KC_AMPR,        KC_LPRN,        KC_RPRN, CM_SCLN, KC_TRNS, KC_COMM, KC_DOT,  KC_QUOT,       KC_TRNS,         KC_TILD},
+  {KC_HASH, KC_PIPE,        KC_LCBR,        KC_RCBR, KC_SLSH, KC_TRNS, KC_TRNS, KC_GRV,  KC_DQT,        KC_TRNS,         KC_CIRC},
+  {KC_TRNS, KC_TRNS,        KC_LBRC,        KC_RBRC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,         KC_TRNS}
+},
+[FKEY] = {
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F9,   KC_F10,        KC_F11,          KC_F12},
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F5,   KC_F6,         KC_F7,           KC_F8},
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1,   KC_F2,         KC_F3,           KC_F4},
+  {KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,         KC_TRNS}
+}};
+
+const uint16_t PROGMEM fn_actions[] = {};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch(id) {}
+
+  return MACRO_NONE;
+};

keyboards/atreus/keymaps/jeremy/readme.md

@@ -0,0 +1,45 @@
+Jeremy's Atreus Key Mapping
+===========================
+
+I am a programmer by trade that suffers from the beginning stages of RSI. As a programmer I use letters, symbols and cursor navigation most often. To prevent strange finger gymnastics, I wrote a script to rank which non-letter characters occurred in my primary source projects most often and then placed these characters in the easiest to reach locations, for me. I made heavy use of momentary layer toggling.
+
+My layout is also geared toward a software based Colemak mapping. I would like it to be hardware, but I use my Laptop on the go frequently and thus my laptop keyboard. I have moved the keycaps to reflect the Colemak layout. My laptop is a MacBook Pro (2015).
+
+## Main Layers
+
+1. [Letters](http://www.keyboard-layout-editor.com/#/gists/6861cb9df09ce78efaddf8aa7471e3ac)
+2. [Symbols](http://www.keyboard-layout-editor.com/#/gists/8956a18b508a78e93b9c38ec3fcccaa5)
+3. [Navigation](http://www.keyboard-layout-editor.com/#/gists/6ed492b714a7f54eb1c5de09b87fd8c4)
+4. [Numbers](http://www.keyboard-layout-editor.com/#/gists/399ceb5624e8388e48a3a5eacac8e973)
+5. [Function Keys](http://www.keyboard-layout-editor.com/#/gists/7fd7dc24c7048316f3724b1893c64e89)
+
+## Notes
+
+### General
+
+Some characters can be accessed multiple ways. This was done because you may be in a given layer, such as numbers, where when doing math, you may need quick access to the parentheses characters for grouping. This prevents some layer switching.
+
+I own an ErgoDox and plan on porting this as a base layer, then using the extra keys the ErgoDox provides accordingly. My goal, though, is to be fully functional on this base setup and build everything into muscle memory.
+
+### Symbol Layer
+
+1. I placed characters that deal with an if statement close together, such as !, & and |.
+2. All matching brace/bracket characters are together as well.
+
+### Number Layer
+
+1. Everything I did was a compromise when trying to mimic a ten-key. I did the best I could.
+2. Operators are duplicated on the right and left. I do not find it comfortable to use my pinky much, so I tend to use my left hand for +, -, * and / but those were also placed on the right hand to mimic the ten-key.
+3. Parentheses were added for typing on the calculator.
+
+### Cursor Layer
+
+1. It includes basic audio controls because they didn't really fit anywhere else
+2. It contains basic file manipulation. I'm not sure that was a good idea. I do save all the time, but Cmd+S isn't exactly hard.
+3. It contains the backspace and delete keys right on top of the left and right arrows.
+4. Cmd and Opt keys are duplicated. This makes for very easy navigation, for example on a Mac, Opt+Left/Right moves word by word. It also backspaces or deletes word by word.
+
+### Function Layer
+
+1. Almost all other layers I saw grouped the F keys into a bunch of three. This only gives nine function keys in order if you attempt to stay as close to the home row as possible. I went with a group of four, which gives all twelve function keys to the right hand, one row below and above the home row.
+2. I duplicated the Command and Option keys the same as on the cursor layer. This makes it dead easy to hit modified function keys such as Cmd+Opt+F5. It's also easy to toss in a Shift modifier in there with the right thumb since the bottom row is preserved.

keyboards/lets_split/lets_split.c

@@ -24,7 +24,9 @@ void matrix_init_kb(void) {
 };
 
 void shutdown_user(void) {
-    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
-    _delay_ms(150);
-    stop_all_notes();
+    #ifdef AUDIO_ENABLE
+        PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+	_delay_ms(150);
+	stop_all_notes();
+    #endif
 }

keyboards/planck/keymaps/cbbrowne/config.h

@@ -3,6 +3,9 @@
 
 #include "../../config.h"
 
+#define LEADER_TIMEOUT 300
+#define BACKLIGHT_BREATHING
+
 /* cbbrowne user configuration */
 
 #define randadd 53
@@ -16,5 +19,3 @@
 
 #endif
 
-
-

keyboards/planck/keymaps/cbbrowne/keymap.c

@@ -65,10 +65,11 @@
 */
 
 enum layers {
-  _QW = 0,  /* Qwerty mapping */
-  _LW, /* Lower layer, where top line has symbols !@#$%^&*() */
-  _RS, /* Raised layer, where top line has digits 1234567890 */
-  _KP, /* Key pad */
+  _QWERTY = 0,  /* Qwerty mapping */
+  _LOWER, /* Lower layer, where top line has symbols !@#$%^&*() */
+  _RAISE, /* Raised layer, where top line has digits 1234567890 */
+  _KEYPAD, /* Key pad */
+  _ADJUST, /* Special Adjust layer coming via tri-placement */
 };
 
 enum macro_id {
@@ -76,37 +77,60 @@ enum macro_id {
   M_USERNAME,
   M_RANDDIGIT,
   M_RANDLETTER,
-  M_VERSION
+  M_VERSION,
+  MACRO_UPPER,
+  MACRO_LOWER,
 };
 
+#define M_LOWER M(MACRO_LOWER)
+#define M_UPPER M(MACRO_UPPER)
+#define ROT_LED M(M_LED)   /* Rotate LED */
+#define QWERTY DF(_QWERTY)   /* Switch to QWERTY layout */
+#define KEYPAD DF(_KEYPAD)   /* Switch to keypad */
+#define USERNAME M(M_USERNAME) /* shortcut for username */
+#define RANDDIG M(M_RANDDIGIT)
+#define RANDALP M(M_RANDLETTER)
+#define CTLENTER MT(MOD_RCTL, KC_ENT)
+#define SHIFTQUOTE MT(MOD_RSFT, KC_QUOT)
+#define ALTRIGHT MT(MOD_LALT, KC_RGHT)
+#define MVERSION M(M_VERSION)
+
+
 /* Note that Planck has dimensions 4 rows x 12 columns */
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_QW] = { /* Qwerty */
+[_QWERTY] = { /* Qwerty */
   {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
-  {KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, MT(MOD_RSFT, KC_ENT)},
-  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_QUOT },
-  {KC_TAB,  M(M_LED), KC_LALT, KC_LGUI, MO(_LW), KC_SPC,  KC_SPC,  MO(_RS), KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+  {KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, CTLENTER},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SHIFTQUOTE },
+  {KC_TAB,  KC_LALT, ROT_LED, KC_LGUI, M_LOWER, KC_SPC,  KC_SPC,  M_UPPER, KC_LEFT, KC_DOWN, KC_UP,   ALTRIGHT}
   /* Note that KC_SPC is recorded TWICE, so that either matrix position can activate it */
 },
-[_RS] = { /* RAISE */
+[_RAISE] = { /* RAISE */
   {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
   {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
-  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DF(_QW), DF(_KP), DF(_KP), RESET,   _______},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  QWERTY,  KEYPAD,  KEYPAD,  RESET,   _______},
   {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
 },
-[_LW] = { /* LOWER */
+[_LOWER] = { /* LOWER */
   {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
   {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
-  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DF(_QW), DF(_KP), DF(_KP), RESET,   _______},
-  {_______, DF(_KP), _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  QWERTY,  KEYPAD,  KEYPAD, RESET,   _______},
+  {_______, KEYPAD, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+    },
+[_KEYPAD] = { /* Key Pad */
+  {KC_ESC,  USERNAME,    MVERSION,   KC_F10,   KC_F11,  KC_F12,   KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC},
+  {KC_LCTL, RANDDIG,   KC_F5,   KC_F6,    KC_F7,   KC_F8,    KC_PGDN, KC_KP_MINUS, KC_4, KC_5, KC_6, KC_PIPE},
+  {KC_LSFT, RANDALP,   KC_F1,   KC_F2,    KC_F3,   KC_F4,    KC_DEL,  KC_KP_PLUS,  KC_1, KC_2,  KC_3, KC_ENTER},
+  {KC_TAB,  KC_LALT, ROT_LED, KC_LGUI,  M_LOWER,  KC_SPC,    KC_SPC,  QWERTY,   KC_LEFT, KC_DOWN, KC_UP,  KC_RIGHT}
 },
-[_KP] = { /* Key Pad */
-  {KC_ESC,  M(M_USERNAME),    M(M_VERSION),   KC_F10,   KC_F11,  KC_F12,   KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC},
-  {KC_LCTL, M(M_RANDDIGIT),   KC_F5,   KC_F6,    KC_F7,   KC_F8,    KC_PGDN, KC_KP_MINUS, KC_4, KC_5, KC_6, KC_PIPE},
-  {KC_LSFT, M(M_RANDLETTER),  KC_F1,   KC_F2,    KC_F3,   KC_F4,    KC_DEL,  KC_KP_PLUS,  KC_1, KC_2,  KC_3, KC_ENTER},
-  {BL_STEP, M(M_LED), KC_LALT, KC_LGUI, KC_NO, KC_SPC,  KC_SPC,  DF(_QW),   KC_LEFT, KC_DOWN, KC_UP,  KC_RIGHT}
-}
+
+[_ADJUST] = { /* Adjustments - gonna shift the wild tools in here */
+  {ROT_LED,USERNAME,MVERSION, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  {_______, RANDDIG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  {_______, RANDALP, _______, _______, _______,   RESET,   RESET, _______, _______, _______, _______, _______ },
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }
+}  
 };
 
 /* What is fn_actions actually used for??? */
@@ -171,6 +195,39 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
       unregister_code (KC_A + rval);
     }
     break;
+  case MACRO_UPPER:
+    if (record->event.pressed)
+      {
+	layer_on(_RAISE);
+#ifdef BACKLIGHT_ENABLE
+	breathing_speed_set(2);
+	breathing_pulse();
+#endif
+	update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+    else
+      {
+	layer_off(_RAISE);
+	update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+    break;
+  case MACRO_LOWER:
+    if (record->event.pressed)
+      {
+	layer_on(_LOWER);
+#ifdef BACKLIGHT_ENABLE
+	breathing_speed_set(2);
+	breathing_pulse();
+#endif
+	update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+    else
+      {
+	layer_off(_LOWER);
+	update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+    break;
+    
   }
   return MACRO_NONE;
 };

keyboards/planck/keymaps/cbbrowne/readme.md

@@ -24,7 +24,26 @@ doing sundry experimentation:
    - Key [2][2] aka "a" uses a random number generator to select a digit 0-9 at random
    - Key [3][2] aka "z" uses a random number generator to select a letter a-z at random
    - Key [1][3] aka "e" spits out the keymap version number
- * Minor use of Space Cadet Shift; my SHIFT key has switched to KC_LSP0, so that when I just hit SHIFT, I get a left parens: ( which is great for Lisping.  I don't have a Right Shift, so I don't get an autoclose; I think I'll live with that until a Planck successor with more lines of keys :-)
+  * Trying out sgoodwin's "hold Enter down to get Shift"
+    - Liking this Quite Well Enough...
+    - Applied this to both Shift and Quote
+    - It seems likely that Alt should get a right-hand-side, akin to this...
+    - Alt needs to move, and get a RHS
+      - Hence ALTRIGHT, and shifted ROT_LED over
+      - Emacs likes this!!!  :-)
+    - I'm suspicious that I'll want to shift ROT_LED another location over,
+      so some modifier can replace the OS/KC_LGUI key
+  * I have added an alternate ADJUST layer that is activated via update_tri_layer()
+    - e.g. - LOWER+RAISE simultaneously
+    - This seems entirely more useful for handling my "special keys"
+      like the random numbers, user name, and such, than the keypad layer
+  * The _ADJUST layer provides a good place to have RESET
+    - But this isn't strictly enough; I want RESET somewhat accessible from
+      main layer lest an error hide that layer
+    - I never use the OS/KC_LGUI key (that's Command on MacOS, Windows
+      Key on Windows), so that's a good place to have it as a chord of
+      some sort
+        
 
 2. Some code structure ideas
 ---------------------------------------------------
@@ -43,8 +62,8 @@ doing sundry experimentation:
    only need to fit 4 symbols onto each line, rather than 12.
 
    I used enums to manage layer IDs and macro IDs so that I don't need
-   to care (beyond "start at 0", and arguably that's not needed) about
-   their values.
+   to care (beyond "start at 0", and arguably even that's not needed)
+   about their values.
 
 3. Things I did not like about the default mapping
 ---------------------------------------------------------
@@ -57,12 +76,27 @@ doing sundry experimentation:
      and shift ESC off the first column so KC_LCTL and KC_LALT can
      be on the first column.
    * I needed to swap ' and ENTER
+
+4. Unuseful experiments
+---------------------------------------------------------
+
+I have tried some things out that didn't turn out particularly well.
+I'll note some of these for posterity, hopefully helpful in not doing
+unwise things again...
+
    * I tried added Workman alongside Dvorak and Colemak
      - Boy, oh boy, these don't help!!!
      - I have done 30 years of learning of Emacs key mappings, and
        these alternative keyboards massively mess me up
 
-4. TODO
+   * Space Cadet Shift; switching L_SHIFT to KC_LSP0, so that when I
+     just hit SHIFT, I get a left parens.  In principle, this is great
+     for Lisping.
+     - Unfortunately, there are times when mouse interfaces use SHIFT
+       to allow selecting multiple items, and this really interferes
+        with that
+
+5. TODO
 ---------------------------------------------------------
 
   * I use tmux quite a lot; the mollat keymap seems to have some
@@ -77,4 +111,3 @@ doing sundry experimentation:
   * The jeebak keymap seems to have some neat ideas:
     - Number layer which is aggressive about having numbers in several places
     - Touch layer seems interesting
-  * Trying out sgoodwin's "hold Enter down to get Shift"

keyboards/vision_division/config.h

@@ -26,10 +26,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION ROW2COL
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
@@ -124,10 +123,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /* disable debug print */
-//#define NO_DEBUG
+// #ifndef NO_DEBUG
+// #  define NO_DEBUG
+// #endif
 
 /* disable print */
-//#define NO_PRINT
+// #ifndef NO_PRINT
+// #  define NO_PRINT
+// #endif
+
+/* Only print user print statements */
+// #define USER_PRINT
+
 
 /* disable action features */
 //#define NO_ACTION_LAYER

keyboards/vision_division/keymaps/default/Makefile

@@ -2,19 +2,19 @@
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = yes          # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+BOOTMAGIC_ENABLE   = yes  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE    = yes  # Mouse keys(+4700)
+EXTRAKEY_ENABLE    = yes  # Audio control and System control(+450)
+CONSOLE_ENABLE     = yes  # Console for debug(+400)
+COMMAND_ENABLE     = yes  # Commands for debug and configuration
+NKRO_ENABLE        = yes  # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE   = yes  # Enable keyboard backlight functionality
+MIDI_ENABLE        = no   # MIDI controls
+AUDIO_ENABLE       = yes  # Audio output on port C6
+UNICODE_ENABLE     = no   # Unicode
+BLUETOOTH_ENABLE   = no   # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE    = no   # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE   = no   # Breathing sleep LED during USB suspend
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile

keyboards/vision_division/keymaps/default/config.h

@@ -4,25 +4,44 @@
 #include "../../config.h"
 #include "matrix_types.h"
 
-
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      GET_PID(NUMERIC_NORMAL, HOMING_MAX_TEENSY)
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    IBNobody
 #define PRODUCT         Vision Division
 #define DESCRIPTION     Full / Split Keyboard
 
-
-#define MATRIX_ROWS 6
+#define MATRIX_ROWS     6
 #define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
 
-#define MATRIX_COLS GET_MATRIX_COLS(NUMERIC_NORMAL, HOMING_MAX_TEENSY)
-#define MATRIX_COL_PINS GET_MATRIX_COL_PINS(NUMERIC_NORMAL, HOMING_MAX_TEENSY)
+// !!! MAKE SURE THAT THE LEFT/RIGHT PCB DEFINES MATCH ON ALL OF THESE COLUMNS
 
-#define UNUSED_PINS
+//                                               **LEFT**                 **RIGHT**
+#define PRODUCT_ID      GET_PID(                 NUMERIC_NORMAL,          NUMERIC_MAX_TEENSY)
+#define MATRIX_COLS     GET_MATRIX_COLS(         NUMERIC_NORMAL,          NUMERIC_MAX_TEENSY)
+#define MATRIX_COL_PINS GET_MATRIX_COL_PINS(     NUMERIC_NORMAL,          NUMERIC_MAX_TEENSY)
 
-/*#define KEYMAP( \
+#define KEYMAP(MATRIX_LAYER, \
+      k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A,               k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, k11C, \
+      k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A,               k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, k21C, \
+      k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A,               k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, k31C, \
+      k401, k402, k403, k404,       k405, k406, k407, k408, k409, k40A,               k411, k412, k413, k414, k415, k416, k417, k418,       k419, k41A, k41B, k41C, \
+      k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A,               k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, k51C, \
+      k601, k602, k603, k604,       k605, k606, k607, k608, k609, k60A,               k611, k612, k613, k614, k615, k616, k617, k618,       k619, k61A, k61B, k61C  \
+) \
+KEYMAP_MASTER(MATRIX_LAYER,                      NUMERIC_NORMAL,          NUMERIC_MAX_TEENSY, \
+      k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, KC_NO, KC_NO, k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, k11C, \
+      k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, KC_NO, KC_NO, k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, k21C, \
+      k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, KC_NO, KC_NO, k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, k31C, \
+      k401, k402, k403, k404,       k405, k406, k407, k408, k409, k40A, KC_NO, KC_NO, k411, k412, k413, k414, k415, k416, k417, k418,       k419, k41A, k41B, k41C, \
+      k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A, KC_NO, KC_NO, k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, k51C, \
+      k601, k602, k603, k604,       k605, k606, k607, k608, k609, k60A, KC_NO, KC_NO, k611, k612, k613, k614, k615, k616, k617, k618,       k619, k61A, k61B, k61C  \
+)
+
+// Example Keymap Macros
+
+/*
+#define KEYMAP(MATRIX_LAYER, \
       k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, k11C, \
       k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, k21C, \
       k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, k31C, \
@@ -30,16 +49,18 @@
       k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, k51C, \
       k601, k602, k603, k604,       k605, k606, k607, k608, k609, k60A, k60B, k60C, k611, k612, k613, k614, k615, k616, k617, k618,       k619, k61A, k61B, k61C  \
 ) \
-KEYMAP_MASTER(NUMERIC_MAX_TEENSY, NUMERIC_MAX, \
+KEYMAP_MASTER(MATRIX_LAYER,                      NUMERIC_MAX_TEENSY,      NUMERIC_MAX, \
       k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C, \
       k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C, \
       k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C, \
       k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C, \
       k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C, \
       k601, k602, k603, k604, k605, k606, k607, k608, k609, k60A, k60B, k60C, k611, k612, k613, k614, k615, k616, k617, k618, k619, k61A, k61B, k61C  \
-)*/
+)
+*/
 
-#define KEYMAP( \
+/*
+#define KEYMAP(MATRIX_LAYER, \
       k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, \
       k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, \
       k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, \
@@ -47,7 +68,7 @@ KEYMAP_MASTER(NUMERIC_MAX_TEENSY, NUMERIC_MAX, \
       k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A, k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, \
       k601, k602, k603, k604,       k605, k606, k607, k608, k609, k60A, k611, k612, k613, k614, k615, k616, k617, k618,       k619, k61A, k61B  \
 ) \
-KEYMAP_MASTER(NUMERIC_NORMAL, HOMING_MAX_TEENSY, \
+KEYMAP_MASTER(MATRIX_LAYER,                      NUMERIC_NORMAL,          HOMING_MAX_TEENSY, \
       k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, KC_NO, KC_NO, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, KC_NO, \
       k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, KC_NO, KC_NO, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, KC_NO, \
       k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, KC_NO, KC_NO, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, KC_NO, \
@@ -55,5 +76,6 @@ KEYMAP_MASTER(NUMERIC_NORMAL, HOMING_MAX_TEENSY, \
       k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, KC_NO, KC_NO, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, KC_NO, \
       k601, k602, k603, k604, k605, k606, k607, k608, k609, k60A, KC_NO, KC_NO, k611, k612, k613, k614, k615, k616, k617, k618, k619, k61A, k61B, KC_NO  \
 )
+*/
 
 #endif

keyboards/vision_division/matrix_types.h

@@ -139,28 +139,29 @@
 
 // Changable Row Macro
 
-#define KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, \
+#define _KEYMAP_ROW( _LEFT_TYPE, _RIGHT_TYPE, \
   k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
 ) \
-KEYMAP_ROW_LEFT_ ## LEFT_TYPE(k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C), KEYMAP_ROW_RIGHT_ ## RIGHT_TYPE(k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C)
+KEYMAP_ROW_LEFT_ ## _LEFT_TYPE(   k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C ), \
+KEYMAP_ROW_RIGHT_ ## _RIGHT_TYPE( k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C )
 
 // Changable Master Macro
 
-#define KEYMAP_MASTER(LEFT_TYPE, RIGHT_TYPE, \
-      k001, k002, k003, k004,       k005, k006, k007, k008, k009, k00A, k00B, k00C, k011, k012, k013, k014, k015, k016, k017, k018,       k019, k01A, k01B, k01C, \
-      k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, k11C, \
-      k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, k21C, \
-      k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, k31C, \
-      k401, k402, k403, k404,       k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418,       k419, k41A, k41B, k41C, \
-      k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, k51C  \
+#define KEYMAP_MASTER(_MATRIX_LAYER, _LEFT_TYPE, _RIGHT_TYPE, \
+                                            k001, k002, k003, k004,       k005, k006, k007, k008, k009, k00A, k00B, k00C,       k011, k012, k013, k014, k015, k016, k017, k018,       k019, k01A, k01B, k01C, \
+                                            k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k10B, k10C,       k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, k11C, \
+                                            k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k20B, k20C,       k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, k21C, \
+                                            k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k30B, k30C,       k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, k31C, \
+                                            k401, k402, k403, k404,       k405, k406, k407, k408, k409, k40A, k40B, k40C,       k411, k412, k413, k414, k415, k416, k417, k418,       k419, k41A, k41B, k41C, \
+                                            k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A, k50B, k50C,       k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, k51C  \
 ) \
-{ \
-    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C ) },\
-    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C ) },\
-    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C ) },\
-    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C ) },\
-    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C ) },\
-    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C ) },\
+[_MATRIX_LAYER] = { \
+    { _KEYMAP_ROW( _LEFT_TYPE, _RIGHT_TYPE, k001, k002, k003, k004,       k005, k006, k007, k008, k009, k00A, k00B, k00C,       k011, k012, k013, k014, k015, k016, k017, k018,       k019, k01A, k01B, k01C ) },\
+    { _KEYMAP_ROW( _LEFT_TYPE, _RIGHT_TYPE, k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k10B, k10C,       k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, k11C ) },\
+    { _KEYMAP_ROW( _LEFT_TYPE, _RIGHT_TYPE, k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k20B, k20C,       k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, k21C ) },\
+    { _KEYMAP_ROW( _LEFT_TYPE, _RIGHT_TYPE, k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k30B, k30C,       k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, k31C ) },\
+    { _KEYMAP_ROW( _LEFT_TYPE, _RIGHT_TYPE, k401, k402, k403, k404,       k405, k406, k407, k408, k409, k40A, k40B, k40C,       k411, k412, k413, k414, k415, k416, k417, k418,       k419, k41A, k41B, k41C ) },\
+    { _KEYMAP_ROW( _LEFT_TYPE, _RIGHT_TYPE, k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A, k50B, k50C,       k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, k51C ) },\
 }
 
 

keyboards/vision_division/rules.mk

@@ -63,7 +63,7 @@ COMMAND_ENABLE ?= yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE ?= no            # MIDI controls
 UNICODE_ENABLE ?= no         # Unicode
 BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/vision_division/vision_division.c

@@ -24,5 +24,45 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
 
+  if (usb_led & (1 << USB_LED_CAPS_LOCK))
+  {
+    // HI
+    DDRD  |= (1<<4);
+    PORTD |= (1<<4);
+  }
+  else
+  {
+    // Hi-Z
+    DDRD  &= ~(1<<4);
+    PORTD &= ~(1<<4);
+  }
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK))
+  {
+    // HI
+    DDRD  |= (1<<5);
+    PORTD |= (1<<5);
+  }
+  else
+  {
+    // Hi-Z
+    DDRD  &= ~(1<<5);
+    PORTD &= ~(1<<5);
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK))
+  {
+    // HI
+    DDRD  |= (1<<6);
+    PORTD |= (1<<6);
+  }
+  else
+  {
+    // Hi-Z
+    DDRD  &= ~(1<<6);
+    PORTD &= ~(1<<6);
+  }
+
 	led_set_user(usb_led);
 }
+

tmk_core/common/avr/bootloader.c

@@ -38,7 +38,7 @@
  *          |               |                        |               |
  *          =               =                        =               =
  *          |               | 32KB-4KB               |               | 128KB-8KB
- * 0x6000   +---------------+               0x1FC00  +---------------+
+ * 0x7000   +---------------+               0x1E000  +---------------+
  *          |  Bootloader   | 4KB                    |  Bootloader   | 8KB
  * 0x7FFF   +---------------+               0x1FFFF  +---------------+
  *
@@ -64,8 +64,8 @@
 #define BOOTLOADER_START    (FLASH_SIZE - BOOTLOADER_SIZE)
 
 
-/* 
- * Entering the Bootloader via Software 
+/*
+ * Entering the Bootloader via Software
  * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
  */
 #define BOOTLOADER_RESET_KEY 0xB007B007
@@ -137,7 +137,7 @@ void bootloader_jump_after_watchdog_reset(void)
 #if 0
 /* Jumping To The Bootloader
  * http://www.pjrc.com/teensy/jump_to_bootloader.html
- * 
+ *
  * This method doen't work when using LUFA. idk why.
  * - needs to initialize more regisers or interrupt setting?
  */

tmk_core/common/command.c

@@ -384,9 +384,6 @@ static bool command_common(uint8_t code)
                 debug_mouse    = true;
             } else {
                 print("\ndebug: off\n");
-                debug_matrix   = false;
-                debug_keyboard = false;
-                debug_mouse    = false;
             }
             break;